In vitro folding and oligomerization of a membrane protein. Transition of bacterial porin from random coil to native conformation

The Formation of β-Strand Nine (β9) in the Folding and Insertion of BamA from an Unfolded Form into Lipid Bilayers

Transmembrane proteins span lipid bilayer membranes and serve essential functions in all living cells. Membrane-inserted domains are of either α-helical or β-barrel structure. Despite their biological importance, the biophysical mechanisms of the folding and insertion of proteins into membranes are not well understood. While the relative composition of the secondary structure has been examined by circular dichroism spectroscopy in folding studies for several outer membrane proteins, it is currently not known how individual β-strands fold. Here, the folding and insertion of the β-barrel assembly machinery protein A (BamA) from the outer membrane of Escherichia coli into lipid bilayers were investigated, and the formation of strand nine (β₉) of BamA was examined. Eight single-cysteine mutants of BamA were overexpressed and isolated in unfolded form in 8 M urea. In each of these mutants, one of the residues of strand β₉, from R572 to V579, was replaced by a cysteine and labeled with the fluorophore IAEDANS for site-directed fluorescence spectroscopy. Upon urea-dilution, the mutants folded into the native structure and were inserted into lipid bilayers of dilauroylphosphatidylcholine, similar to wild-type BamA. An aqueous and a membrane-adsorbed folding intermediate of BamA could be identified by strong shifts in the intensity maxima of the IAEDANS fluorescence of the labeled mutants of BamA towards shorter wavelengths, even in the absence of lipid bilayers. The shifts were greatest for membrane-adsorbed mutants and smaller for the inserted, folded mutants or the aqueous intermediates. The spectra of the mutants V573C-, L575C-, G577C-, and V579C-BamA, facing the lipid bilayer, displayed stronger shifts than the spectra recorded for the mutants R572C-, N574C-, T576C-, and K578C-BamA, facing the β-barrel lumen, in both the membrane-adsorbed form and the folded, inserted form. This alternating pattern was neither observed for the IAEDANS spectra of the unfolded forms nor for the water-collapsed forms, indicating that strand β₉ forms in a membrane-adsorbed folding intermediate of BamA. The combination of cysteine scanning mutagenesis and site-directed fluorescence labeling is shown to be a valuable tool in examining the local secondary structure formation of transmembrane proteins.

Expression of membrane beta-barrel protein in E. coli at low temperatures: Structure of Yersinia pseudotuberculosis OmpF porin inclusion bodies

The recombinant OmpF porin of Yersinia pseudotuberculosis as a model of transmembrane protein of the β-barrel structural family was used to study low growth temperature effect on the structure of the produced inclusion bodies (IBs). This porin showed a very low expression level in E. coli at a growth temperature below optimal 37 °C. The introduction of a N-terminal hexahistidine tag into the mature porin molecule significantly increased the biosynthesis of the protein at low cultivation temperatures. The recombinant His-tagged porin (rOmpF-His) was expressed in E. coli at 30 and 18 °C as inclusion bodies (IB-30 and IB-18). The properties and structural organization of IBs, as well as the structure of rOmpF-His solubilized from the IBs with urea and SDS, were studied using turbidimetry, electron microscopy, dynamic light scattering, optical spectroscopy, and amyloid-specific dyes. IB-18, in comparison with IB-30, has a higher solubility in denaturants, suggesting a difference between IBs in the conformation of the associated polypeptide chains. The spectroscopic analysis revealed that rOmpF-His IBs have a high content of secondary structure with a tertiary-structure elements, including a native-like conformation, the proportion of which in IB-18 is higher than in IB-30. Solubilization of the porin from IBs is accompanied by a modification of its secondary structure. The studied IBs also contain amyloid-like structures. The results obtained in this study expand our knowledge of the structural organization of IBs formed by proteins of different structural classes and also have a contribution into the new approaches development of producing functionally active recombinant membrane proteins.

Porin from Marine Bacterium Marinomonas primoryensis KMM 3633T: Isolation, Physico-Chemical Properties, and Functional Activity

Marinomonas primoryensis KMM 3633^T, extreme living marine bacterium was isolated from a sample of coastal sea ice in the Amursky Bay near Vladivostok, Russia. The goal of our investigation is to study outer membrane channels determining cell permeability. Porin from M. primoryensis KMM 3633^T (MpOmp) has been isolated and characterized. Amino acid analysis and whole genome sequencing were the sources of amino acid data of porin, identified as Porin_4 according to the conservative domain searching. The amino acid composition of MpOmp distinguished by high content of acidic amino acids and low content of sulfur-containing amino acids, but there are no tryptophan residues in its molecule. The native MpOmp existed as a trimer. The reconstitution of MpOmp into black lipid membranes demonstrated its ability to form ion channels whose conductivity depends on the electrolyte concentration. The spatial structure of MpOmp had features typical for the classical gram-negative porins. However, the oligomeric structure of isolated MpOmp was distinguished by very low stability: heat-modified monomer was already observed at 30 °C. The data obtained suggest the stabilizing role of lipids in the natural membrane of marine bacteria in the formation of the oligomeric structure of porin.

Self-Organization of Recombinant Membrane Porin OmpF from Yersinia pseudotuberculosis in Aqueous Environments

Recombinant porin OmpF (an integral protein of bacterial outer membrane) from Yersinia pseudotuberculosis was synthesized in Escherichia coli cells as inclusion bodies. By combining the methods of anion-exchange and gel filtration chromatographies, recombinant OmpF (rOmpF) was isolated as an individual protein in its denatured state, and its characteristic properties (molecular mass, N-terminal amino acid sequence, and hydrodynamic radius of the protein in 8 M urea solution) were determined. According to the data of gel filtration, dynamic light scattering, optical spectroscopy, and binding of the hydrophobic fluorescent probe 8-anilino-1-naphthalenesulfonic acid, the rOmpF is fully unfolded in 8 M urea and exists in random coil conformation. In aqueous solutions, rOmpF undergoes conformational changes, reversible self-association, and aggregation. When transferred from 8 M urea into water, PBS (containing 0.15 M NaCl, pH 7.4), or buffer containing 0.8 M urea (pH 8.0), fully unfolded rOmpF forms relatively compact monomeric intermediates prone to self-association with formation of multimers. The oligomeric intermediates have high content of native protein-like secondary structure and pronounced tertiary structure. In acidic media (pH 5.0, close to the protein isoelectric point), rOmpF undergoes rapid irreversible aggregation. Therefore, we found that medium composition significantly affects both porin folding and processes of its self-association and aggregation.

Novel Kinetic Intermediates Populated along the Folding Pathway of the Transmembrane β-Barrel OmpA

We examined the folding of the β-barrel membrane protein OmpA from Escherichia coli. Although previous studies identified several intermediate states followed by a concerted translocation mechanism across the bilayer, some aspects of the pathway were still unclear, including the extent of secondary structure formation in the intermediate states and how the mechanism gave rise to multiple exponential phases in the folding kinetics. We addressed these questions by investigating the folding kinetics of the OmpA transmembrane β-barrel domain over a range of bilayer thicknesses, allowing us to observe different regions of the folding pathway. The fastest folding into the thinnest bilayers provided information about the later stages of the process, and the slowest folding into thicker bilayers revealed early kinetic steps. Folding was monitored using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and circular dichroism spectroscopy, which provide complementary information about tertiary and secondary structure formation. We globally fit the folding data to kinetic schemes and found that the same core pathway was followed under all lipid conditions. We propose a multistep folding mechanism for OmpA that includes unstructured surface-adsorbed states converting through a partially inserted state with substantial β-sheet structure to the final natively inserted barrel. Kinetic models show that all steps of the main folding pathway are accelerated by membrane defects that occur as a result of thinning the bilayer or incubation of lipids at the phase transition temperature. In addition to suppressing off-pathway states, β-barrel assembly machinery-catalyzed folding in vivo could accelerate any or all of these main folding steps to ensure efficient outer membrane protein biogenesis in vivo.

High-yield membrane protein expression from E. coli using an engineered outer membrane protein F fusion

Obtaining high yields of membrane proteins necessary to perform detailed structural study is difficult due to poor solubility and variability in yields from heterologous expression systems. To address this issue, an Escherichia coli-based membrane protein overexpression system utilizing an engineered bacterial outer membrane protein F (pOmpF) fusion has been developed. Full-length human receptor activity-modifying protein 1 (RAMP1) was expressed using pOmpF, solubilized in FC15 and purified to homogeneity. Using circular dichroism and fluorescence spectroscopy, purified full-length RAMP1 is composed of approximately 90% α-helix, and retains its solubility and structure in FC15 over a wide range of temperatures (20-60°C). Thus, our approach provides a useful, complementary approach to achieve high-yield, full-length membrane protein overexpression for biophysical studies.

Isolation, functional characterization and crystallization of Aq_1259, an outer membrane protein with porin features, from Aquifex aeolicus

The "hypothetical protein" Aq_1259 was identified by mass spectrometry and purified from native membranes of Aquifex aeolicus. It is a 49.4kDa protein, highly homologous (>52% identity) to several conserved hypothetical proteins from other bacteria. However, none of these proteins has been characterized using biochemical or electrophysiological techniques. Based on the sequence and circular dichroism spectroscopy, the structure of Aq_1259 is predicted to be a β-barrel with 16 β-strands. The strands with loops and turns are distributed evenly through the entire sequence. The function of Aq_1259 was analyzed after incorporation into a lipid bilayer. Electrophysiological measurements revealed a pore that has a basic stationary conductance of 0.48 ± 0.038nS in a buffer with 0.5M NaH₂PO₄ at pH 6.5 and 0.2 ± 0.015nS in a buffer with 0.5M NaCl at pH 6.5. Superimposed on this is a fluctuating conductance of similar amplitude. Aq_1259 could be crystallized. The crystals diffract to a resolution of 3.4Å and belong to space group I222 with cell dimensions of a=138.3Å, b=144.6Å, c=151.8Å.

Transmembrane and extramembrane contributions to membrane protein thermal stability: studies with the NaChBac sodium channel

The thermal stabilities of the extramembranous and transmembranous regions of the bacterial voltage-gated sodium channel NaChBac have been characterised using thermal-melt synchrotron radiation circular dichroism (SRCD) spectroscopy. A series of constructs, ranging from the full-length protein containing both the C-terminal cytoplasmic and the transmembranous domains, to proteins with decreasing amounts of the cytoplasmic domain, were examined in order to separately define the roles of these two types of domains in the stability and processes of unfolding of a membrane protein. The sensitivity of the SRCD measurements over a wide range of wavelengths and temperatures has meant that subtle but reproducible conformational changes could be detected with accuracy. The residues in the C-terminal extramembranous domain were highly susceptible to thermal denaturation, but for the most part the transmembrane residues were not thermally-labile and retained their helical character even at very elevated temperatures. The process of thermal unfolding involved an initial irreversible unfolding of the highly labile distal extramembranous C-terminal helical region, which was accompanied by a reversible unfolding of a small number of helical residues in the transmembrane domain. This was then followed by the irreversible unfolding of a limited number of additional transmembrane helical residues at greatly elevated temperatures. Hence this study has been able to determine the different contributions and roles of the transmembrane and extramembrane residues in the processes of thermal denaturation of this multipass integral membrane protein.

Folding studies of purified LamB protein, the maltoporin from the Escherichia coli outer membrane: trimer dissociation can be separated from unfolding

The folding mechanisms for β-barrel membrane proteins present unique challenges because acquisition of both secondary and tertiary structure is coupled with insertion into the bilayer. For the porins in Escherichia coli outer membrane, the assembly pathway also includes association into homotrimers. We study the folding pathway for purified LamB protein in detergent and observe extreme hysteresis in unfolding and refolding, as indicated by the shift in intrinsic fluorescence. The strong hysteresis is not seen in unfolding and refolding a mutant LamB protein lacking the disulfide bond, as it unfolds at much lower denaturant concentrations than wild type LamB protein. The disulfide bond is proposed to stabilize the structure of LamB protein by clasping together the two sides of Loop 1 as it lines the inner cavity of the barrel. In addition we find that low pH promotes dissociation of the LamB trimer to folded monomers, which run at about one third the size of the native trimer during SDS PAGE and are much more resistant to trypsin than the unfolded protein. We postulate the loss at low pH of two salt bridges between Loop 2 of the neighboring subunit and the inner wall of the monomer barrel destabilizes the quaternary structure.

Site-directed mutagenesis combined with oxidative methionine labeling for probing structural transitions of a membrane protein by mass spectrometry

Exposure of the membrane protein bacteriorhodopsin (BR) to SDS induces partial breakdown of the native conformation. The exact structural properties of this SDS state remain a matter of debate, despite its widespread use in BR folding experiments. The current work employs hydroxyl radical (·OH) labeling in conjunction with mass spectrometry (MS)-based peptide mapping for probing the solvent accessibility of individual BR segments in the presence of SDS. Previous work revealed methionine sulfoxide formation to be the dominant oxidative pathway. Those data suggested extensive unfolding of helices A and D in SDS. Unfortunately, the lack of Met residues in helices C and F implies that no direct information on the behavior of the latter two elements could be obtained. Here, we address this problem by employing two variants with additional Met residues, L93M (helix C) and V179M (helix F). The oxidation behavior of the resulting 11 methionines can be grouped into three categories: (1) extensively labeled both in native BR and in SDS (loop residues M32, M68, and M163); (2) protected in the native state but not in SDS (M20, M118); (3) always protected (M56, M60, M93, M145, M179, M209). These data show that a solvent-inaccessible core is retained in SDS. This core consists of partially intact helices B, C, E, F, and G. The termini of these helices are highly dynamic and/or unraveled, particularly on the cytoplasmic side. Overall, this work demonstrates how the use of engineered ·OH labeling sites can provide insights into structural properties of membrane proteins.

Unfolding free energy of a two-domain transmembrane sugar transport protein

Understanding how an amino acid sequence folds into a functional, three-dimensional structure has proved to be a formidable challenge in biological research, especially for transmembrane proteins with multiple alpha helical domains. Mechanistic folding studies on helical membrane proteins have been limited to unusually stable, single domain proteins such as bacteriorhodopsin. Here, we extend such work to flexible, multidomain proteins and one of the most widespread membrane transporter families, the major facilitator superfamily, thus showing that more complex membrane proteins can be successfully refolded to recover native substrate binding. We determine the unfolding free energy of the two-domain, Escherichia coli galactose transporter, GalP; a bacterial homologue of human glucose transporters. GalP is reversibly unfolded by urea. Urea causes loss of substrate binding and a significant reduction in alpha helical content. Full recovery of helical structure and substrate binding occurs in dodecylmaltoside micelles, and the unfolding free energy can be determined. A linear dependence of this free energy on urea concentration allows the free energy of unfolding in the absence of urea to be determined as +2.5 kcal·mol(-1). Urea has often been found to be a poor denaturant for transmembrane helical structures. We attribute the denaturation of GalP helices by urea to the dynamic nature of the transporter structure allowing denaturant access via the substrate binding pocket, as well as to helical structure that extends beyond the membrane. This study gives insight into the final, critical folding step involving recovery of ligand binding for a multidomain membrane transporter.

Folding and trimerization of signal sequence-less mature TolC in the cytoplasm of Escherichia coli

TolC is a multifunctional outer-membrane protein (OMP) of Escherichia coli that folds into a unique α/β-barrel structure. Previous studies have shown that unlike the biogenesis of β-barrel OMPs, such as porins, TolC assembles independently from known periplasmic folding factors. Yet, the assembly of TolC, like that of β-barrel OMPs, is dependent on BamA and BamD, two essential components of the β-barrel OMP assembly machinery. We have investigated the folding properties and cellular trafficking of a TolC derivative that lacks the entire signal sequence (TolCΔ2–22). A significant amount of TolCΔ2–22 was found to be soluble in the cytoplasm, and a fraction of it folded and trimerized into a conformation similar to that of the normal outer membrane-localized TolC protein. Some TolCΔ2–22 was found to associate with membranes, but failed to assume a wild-type-like folded conformation. The null phenotype of TolCΔ2–22 was exploited to isolate suppressor mutations, the majority of which mapped in secY. In the secY suppressor background, TolCΔ2–22 resumed normal function and folded like wild-type TolC. Proper membrane insertion could not be achieved upon in vitro incubation of cytoplasmically folded TolCΔ2–22 with purified outer membrane vesicles, showing that even though TolC is intrinsically capable of folding and trimerization, for successful integration into the outer membrane these events need to be tightly coupled to the insertion process, which is mediated by the Bam machinery. Genetic and biochemical data attribute the unique folding and assembly pathways of TolC to its large soluble α-helical domain.

Reassembly of an integral oligomeric membrane protein OmpF porin in n-octyl beta-D: -glucopyranoside-lipids mixtures

The denatured monomers of an integral membrane protein OmpF porin were refolded and reassembled into its sodium dodecyl sulfate-resistant trimer in mixtures of n-octyl beta-D: -glucopyranoside and lipids. Effective reassembly was observed with a yield of 60-70% when the denatured monomers (0.1 mg/mL) were solubilized at 25 degrees C for 24 h in a refolding medium (pH 6.9) containing 7 mg/mL n-octyl beta-D: -glucopyranoside, 1 mg/mL sodium dodecyl sulfate and 2-2.5 mg/mL soybean asolectin. The reassembled species was characterized in the presence of sodium dodecyl sulfate by physicochemical methods. Low-angle laser light scattering measurements revealed that the molecular weight of the reassembled species is 115,000 +/- 3,500 which corresponds to that of the trimer of this protein. Circular dichroism spectra suggested that the reassembled species is composed of the same beta-structure as the native one. Synchrotron radiation small-angle X-ray scattering measurements confirmed that the reassembled species is a trimer that has the same compactness as the native one.

Protein folding intermediates of invasin protein IbeA from Escherichia coli

IbeA of Escherichia coli K1 was cloned, expressed and purified as a His(6)-tag fusion protein. The purified fusion protein inhibited E. coli K1 invasion of human brain microvascular endothelial cells and was heat-modifiable. The structural and functional aspects, along with equilibrium unfolding of IbeA, were studied in solution. The far-UV CD spectrum of IbeA at pH 7.0 has a strong negative peak at 215 nm, indicating the existence of beta-sheet-like structure. The acidic unfolding curve of IbeA at pH 2.0 shows the existence of a partially unfolded molecule (molten globule-like structure) with beta-sheet-like structure and displays strong 8-anilino-2-naphthyl sulfonic acid (ANS) binding. The pH dependent intrinsic fluorescence of IbeA was biphasic. At pH 2.0, IbeA exists in a partially unfolded state with characteristics of a molten globule-like state, and the protein is in extended beta-sheet conformation and exhibits strong ANS binding. Guanidine hydrochloride denaturation of IbeA in the molten globule-like state is noncooperative, contrary to the cooperativity seen with the native protein, suggesting the presence of two domains (possibly) in the molecular structure of IbeA, with differential unfolding stabilities. Furthermore, tryptophan quenching studies suggested the exposure of aromatic residues to solvent in this state. Acid denatured unfolding of IbeA monitored by far-UV CD is non-cooperative with two transitions at pH 3.0-1.5 and 1.5-0.5. At lower pH, IbeA unfolds to the acid-unfolded state, and a further decrease in pH to 2.0 drives the protein to the A state. The presence of 0.5 m KCl in the solvent composition directs the transition to the A state by bypassing the acid-unfolded state. Additional guanidine hydrochloride induced conformational changes in IbeA from the native to the A-state, as monitored by near- and far-UV CD and ANS-fluorescence.

The N-terminal helix is a post-assembly clamp in the bacterial outer membrane protein PagP

The Escherichia coli outer membrane beta-barrel enzyme PagP and its homologues are unique in that the eight-stranded barrel is tilted by about 25 degrees with respect to the membrane normal and is preceded by a 19-residue amphipathic alpha-helix. To investigate the role of this helix in the folding and stability of PagP, mutants were generated in which the helix was deleted (Delta(1-19)), or in which residues predicted to be involved in helix-barrel interactions were altered (W17A or R59L). The ability of the variants to insert into detergent micelles or liposomes was studied in vitro using circular dichroism, fluorescence, Fourier transform infrared spectroscopy, electrophoretic mobility and gain of enzyme activity. The data show that PagP, initially unfolded in 5% (w/v) perfluoro-octanoic acid or 6 M guanidinium chloride, inserts spontaneously and folds quantitatively to an active conformation into detergent micelles of cyclofos-7 or into large vesicles of diC(12:0)-phosphatidylcholine (diC(12:0)PC), respectively, the latter in the presence of 7 M urea. Successful refolding of all variants into both micelles and liposomes ruled out an essential role for the helix or helix-barrel interactions in folding and membrane insertion. Measurements of thermal stability indicated that the variants R59L, W17A/R59L and Delta(1-19) were destabilised substantially compared with wild-type PagP. However, in contrast to the other variants, destabilisation of the W17A variant relative to wild-type PagP was much greater in liposomes than in micelles. Analysis of the kinetics of folding and unfolding of all variants in diC(12:0)PC liposomes suggested that this destabilisation arises predominantly from an increased dissociation of the refolded variant proteins from the lipid-inserted state. The data support the view that the helix of PagP is not required for folding and assembly, but instead acts as a clamp, stabilising membrane-inserted PagP after folding and docking with the membrane are complete.

High-level expression, refolding and probing the natural fold of the human voltage-dependent anion channel isoforms I and II

The voltage-dependent anion channel (VDAC) is the major protein found in the outer membrane of mitochondria. The channel is responsible for the exchange of ATP/ADP and the translocation of ions and other small metabolites over the membrane. In order to obtain large amounts of pure and suitably folded human VDAC for functional and structural studies, the genes of the human isoforms I and II (HVDAC1 and HVDAC2) were cloned in Escherichia coli. High-level expression led to inclusion body formation. Both proteins could be refolded in vitro by adding denatured protein to a solution of zwitterionic or nonionic detergents. A highly efficient and fast protocol for refolding was developed that yielded more than 50 mg of pure human VDACs per liter of cell culture. The native and functional state of the refolded porins was probed by Fourier transform infrared spectroscopy to determine the secondary structure composition and by electrophysiological measurements, demonstrating the pore-forming activity of HVDAC1. Furthermore, binding of HVDAC1 to immobilized ATP was demonstrated. Limited proteolysis of HVDAC1 protein embedded in detergent micelles in combination with matrix-assisted laser desorption ionization mass spectrometric analysis was applied to identify micelle-exposed regions of the protein and to develop an improved topology model. Our analysis strongly suggests a 16-stranded, antiparallel beta-barrel with one large and seven short loops and turns. Initial crystallization trials of the protein yielded crystals diffracting to 8 Angstrom resolution.

Gene duplication of the eight-stranded beta-barrel OmpX produces a functional pore: a scenario for the evolution of transmembrane beta-barrels

The repeating unit of outer membrane beta-barrels from Gram-negative bacteria is the beta-hairpin, and representatives of this protein family always have an even strand number between eight and 22. Two dominant structural forms have eight and 16 strands, respectively, suggesting gene duplication as a possible mechanism for their evolution. We duplicated the sequence of OmpX, an eight-stranded beta-barrel protein of known structure, and obtained a beta-barrel, designated Omp2X, which can fold in vitro and in vivo. Using single-channel conductance measurements and PEG exclusion assays, we found that Omp2X has a pore size similar to that of OmpC, a natural 16-stranded barrel. Fusions of the homologous proteins OmpX, OmpA and OmpW were able to fold in vitro in all combinations tested, revealing that the general propensity to form a beta-barrel is sufficient to evolve larger barrels by simple genetic events.

Membrane proteins shape up: understanding in vitro folding

Progress in structural biology has begun to reveal the precise architecture of integral membrane proteins. However, the manner in which these complex structures are achieved remains unclear. Recent developments are starting to shed light on the unfolding and folding of a small but growing number of membrane proteins. Mechanistic details derived from kinetic and thermodynamic experiments now enable comparison of the folding of different membrane proteins and their water-soluble cousins. This work also has important implications for other structural and functional studies of membrane proteins in vitro.

Expression and purification of native and truncated forms of CadF, an outer membrane protein of Campylobacter

Campylobacter is now recognized as the most common bacterial agent of gastroenteritis. The adhesion of bacteria to intestinal cells is a major step in human colonization. The binding of Campylobacter jejuni cells to fibronectin (Fn), a component of the extra cellular matrix, is mediated by a 37,000 outer membrane protein termed CadF for Campylobacter adhesion to Fn. CadF protein is very hard to purify from Campylobacter membranes. In order to study the conformation of this protein, we set out to clone, express, purify, and re-fold the CadF protein. The nucleotide sequence encoding the N-terminal domain of the CadF protein was cloned in a pET-based expression vector. The recombinant protein was further produced in Escherichia coli, purified from inclusion bodies, and refolded. More specifically, the purification experiments were set-up as follows: (i) protein aggregates were collected from cell-lysates, solubilized in urea and enriched by ion-exchange chromatography; (ii) refolding was achieved by drop-by-drop dilution method in detergent containing buffer and monitored by CD measurements; (iii) the protein was finally purified to homogeneity by gel filtration chromatography. In spite of our success in purifying the N-terminal domain of the CadF protein, repeated attempts to express and purify the entire cadF gene in E. coli failed. Using a novel approach, we found it possible to express the entire cadF gene fused to a hexa-histidine encoding nucleotide sequence in C. jejuni. This allowed the expression, synthesis, and purification of the recombinant CadF-His tagged protein from C. jejuni by nickel affinity chromatography followed by gel filtration chromatography. In summary, we developed a novel strategy to produce significant quantities of a recombinant N-terminal portion of the CadF protein (46.5 microg/mg of bacterial dry weight) and of the native CadF protein (3.5 microg/mg of bacterial dry weight) for further studies.

Energetics of membrane protein folding and stability

The critical role of membrane proteins in a myriad of biological and physiological functions has spawned numerous investigations over the past several decades with the long-term goal of identifying the molecular origins and energetic forces that stabilize these proteins within the membrane. Parallel structural and thermodynamics studies on several systems have provided significant insight regarding the driving forces governing folding, assembly, insertion, and translocation of membrane proteins. The present review surveys families of membrane-associated proteins including alpha-helical and beta-barrel structures, viral surface receptors, and pore-forming toxins, citing representative proteins within each of these classes for further scrutiny in terms of structure-function relationships and global conformational stability. This overview presents seminal findings from pioneering studies on the energetics of membrane protein folding and stability to modern techniques that are exploiting the use of molecular genetics and single molecule studies. An overall consensus regarding the molecular origins of membrane protein stability is that a number of intrinsic properties resemble features of soluble proteins, yet there are distinct energetic differences arising from specific intra- and intermolecular interactions within the membrane. The combined efforts from structural, energetics, and dynamics approaches offer unique insights and improve our fundamental understanding of the driving forces dictating membrane protein folding and stability.

Refolding of Escherichia coli outer membrane protein F in detergent creates LPS-free trimers and asymmetric dimers

The Escherichia coli OmpF (outer-membrane protein F; matrix porin) is a homotrimeric beta-barrel and a member of the bacterial porin superfamily. It is the best characterized porin protein, but has resisted attempts to refold it efficiently in vitro. In the present paper, we report the discovery of detergent-based folding conditions, including dodecylglucoside, which can create pure samples of trimeric OmpF. Whereas outer membrane LPS (lipopolysaccharide) is clearly required for in vivo folding, the artificially refolded and LPS-free trimer has properties identical with those of the outer-membrane-derived form. Thus LPS is not required either for in vitro folding or for structural integrity. Dimeric forms of OmpF have been observed in vivo and are proposed to be folding intermediates. In vitro, dimers occur transiently in refolding of trimeric OmpF and, in the presence of dodecylmaltoside, pure dimer can be prepared. This form has less beta-structure by CD and shows lower thermal stability than the trimer. Study of these proteins at the single-molecule level is possible because each OmpF subunit forms a distinct ion channel. Whereas each trimer contains three channels of equal conductance, each dimer always contains two distinct channel sizes. This provides clear evidence that the two otherwise identical monomers adopt different structures in the dimer and indicates that the asymmetric interaction, characteristic of C3 symmetry, is formed at the dimer stage. This asymmetric dimer may be generally relevant to the folding of oligomeric proteins with odd numbers of subunits such as aspartate transcarbamoylase.

Physicochemical characterization of the reassembled dimer of an integral membrane protein OmpF porin

The in vitro reassembled species of OmpF porin, which was renatured from its denatured monomer using n-octyl-beta-D-glucopyranoside, was characterized by low-angle laser light scattering photometry, circular dichroism spectroscopy and synchrotron radiation small-angle X-ray scattering measurements. The light scattering measurement reconfirmed that the reassembled species was the dimer of the protein. Circular dichroism spectra of the reassembled dimer showed a native-like beta-structure. A small-angle X-ray scattering measurement indicated that the size of the reassembled dimer was nearly equal to that of the native trimer under the present experimental conditions. In a thermal denaturation experiment followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the reassembled dimer was less stable than the native trimer.

Expression and refolding of Omp38 from Burkholderia pseudomallei and Burkholderia thailandensis, and its function as a diffusion porin

In the present paper, we describe cloning and expression of two outer membrane proteins, BpsOmp38 (from Burkholderia pseudomallei) and BthOmp38 (from Burkholderia thailandensis) lacking signal peptide sequences, using the pET23d(+) expression vector and Escherichia coli host strain Origami(DE3). The 38 kDa proteins, expressed as insoluble inclusion bodies, were purified, solubilized in 8 M urea, and then subjected to refolding experiments. As seen on SDS/PAGE, the 38 kDa band completely migrated to approximately 110 kDa when the purified monomeric proteins were refolded in a buffer system containing 10% (w/v) Zwittergent 3-14, together with a subsequent heating to 95 degrees C for 5 min. CD spectroscopy revealed that the 110 kDa proteins contained a predominant beta-sheet structure, which corresponded completely to the structure of the Omp38 proteins isolated from B. pseudomallei and B. thailandensis. Immunoblot analysis using anti-BpsOmp38 polyclonal antibodies and peptide mass analysis by MALDI-TOF (matrix-assisted laser-desorption ionization-time-of-flight) MS confirmed that the expressed proteins were BpsOmp38 and BthOmp38. The anti-BpsOmp38 antibodies considerably exhibited the inhibitory effects on the permeation of small sugars through the Omp38-reconstituted liposomes. A linear relation between relative permeability rates and M(r) of neutral sugars and charged antibiotics suggested strongly that the in vitro re-assembled Omp38 functioned fully as a diffusion porin.

Barriers to Folding of the Transmembrane Domain of theEscherichia coliAutotransporter Adhesin Involved in Diffuse Adherence†

Adhesin involved in diffuse adherence (AIDA) is an autotransporter protein that confers the diffuse adherence phenotype to certain diarrheagenic Escherichia coli strains. It consists of a 49 amino acid signal peptide, a 797 amino acid passenger domain, and a 440 amino acid beta-domain integrated in the outer membrane. The beta-domain consists of two parts: the beta(1)-domain, which is predicted to form two beta-strands on the bacterial cell surface, and the beta(2)-domain, which constitutes the transmembrane domain. We here present a detailed biophysical analysis of the AIDA beta-domain addressing its refolding properties and its different conformational states and their stability. We find that the beta(2)-domain in solution can fold only when the beta(1)-domain is present and only with 50% efficiency. However, 100% refolding of the beta(2)-domain, with or without the beta(1)-domain, can be achieved in the presence of a solid support. Folding can only take place above the cmc of the detergent used, but the refolded state is retained if diluted below the cmc, revealing a kinetic barrier to dissociation of the detergent molecules from the folded protein. Refolding attempts of the beta(2)-domain in the absence of a solid support result in the formation of an oligomeric misfolded state both in the absence and in the presence of detergent. Despite being misfolded, these states unfold cooperatively with a T(m) approximately 70 degrees C. The refolded protein in the nonionic detergent octylpolyoxyethylene (oPOE) can only be thermally unfolded in the presence of SDS. The linear relationship between SDS mole fraction and unfolding temperature, T(m), predicts a T(m) of 112.9 +/- 1.2 degrees C for the beta(2)-domain and 132.7 +/- 12.2 degrees C for the entire beta-domain in pure oPOE. Thus, the beta(1)-domain also stabilizes the beta(2)-domain. In conclusion, our data show that the in vitro refolding of the AIDA beta-domain is critically dependent on a solid support, suggesting that in vivo specific biological factors may assist in folding the protein correctly into the outer membrane to avoid the formation of stably misfolded conformations.

Connexins and their environment: effects of lipids composition on ion channels

Intercellular communication is mediated through paired connexons that form an aqueous pore between two adjacent cells. These membrane proteins reside in the plasma membrane of their respective cells and their activity is modulated by the composition of the lipid bilayer. The effects of the bilayer on connexon structure and function may be direct or indirect, and may arise from specific binding events or the physicochemical properties of the bilayer. While the effects of the bilayer and its constituent lipids on gap junction activity have been described in the literature, the underlying mechanisms of the interaction of connexin with its lipidic microenvironment are not as well characterized. Given that the information regarding connexons is limited, in this review, the specific roles of lipids and the properties of the bilayer on membrane protein structure and function are described for other ion channels as well as for connexons.

Protease-deficient DegP suppresses lethal effects of a mutant OmpC protein by its capture

The expression of assembly-defective outer membrane proteins can confer lethality if they are not degraded by envelope proteases. We report here that the expression of a mutant OmpC protein, OmpC(2Cys), which forms disulfide bonds in the periplasm due to the presence of two non-native cysteine residues, is lethal in cells lacking the major periplasmic protease, DegP. This lethality is not observed in dsbA strains that have diminished ability to form periplasmic disulfide bonds. Our data show that this OmpC(2Cys)-mediated lethality in a degP::Km(r) dsbA(+) background can be reversed by a DegP variant, DegP(S210A), that is devoid of its proteolytic activity but retains its reported chaperone activity. However, DegP(S210A) does not reverse the lethal effect of OmpC(2Cys) by correcting its assembly but rather by capturing misfolded mutant OmpC polypeptides and thus removing them from the assembly pathway. Displacement of OmpC(2Cys) by DegP(S210A) also alleviates the negative effect that the mutant OmpC protein has on wild-type OmpF.

Characterization of the refolding and reassembly of an integral membrane protein OmpF porin by low-angle laser light scattering photometry coupled with high-performance gel chromatography

The refolding and reassembly of an integral membrane protein OmpF porin denatured in sodium dodecylsulfate (SDS) into its stable species by the addition of n-octyl-beta-D-glucopyranoside (OG) have been studied by means of circular dichroism (CD) spectroscopy and low-angle laser light scattering photometry coupled with high-performance gel chromatography. The minimal concentration where change in the secondary structure was induced by the addition of OG was found to be 6.0 mg/ml in CD experiments. A species unfolded further than the SDS-denatured form of this protein was observed at an early stage (5-15 min) of refolding just above the minimal OG concentration. In addition, the CD spectrum of protein species obtained above the minimal OG concentration showed that the protein is composed of a beta-structure which is different from the native structure of this protein. In light scattering experiments, no changes in molecular assemblies were observed when the OG concentration was below its minimal refolding concentration determined by CD measurements. Above the minimal concentration, a compact monomeric species was observed when denatured OmpF porin was incubated for 5 min at 25 degrees C in a refolding medium containing 1 mg/ml SDS and 7 mg/ml OG, and then injected into columns equilibrated with the refolding medium. After an incubation of 24 h before injection into the columns, predominant dimerization of this protein was observed in addition to incorrect aggregation.

Escherichia coli OmpA retains a folded structure in the presence of sodium dodecyl sulfate due to a high kinetic barrier to unfolding

Escherichia coli OmpA can be solubilized by sodium dodecyl sulfate (SDS) in its folded structure, and it unfolds upon heating. Although the heat-denatured OmpA remains unfolded after lowering the temperature, the addition of a non-ionic surfactant, octyl glucoside results in refolding of unfolded OmpA. In the present study, we investigated the refolding kinetics of OmpA in a mixed surfactant system of SDS and octyl glucoside using far- and near-UV circular dichroism and fluorescence spectroscopies. We found four kinetic phases in the refolding reaction, which logarithmically depended on the weight fraction of octyl glucoside. We also examined the unfolding kinetics of OmpA upon heating in the presence of SDS by temperature jump experiments. A comparison of the rate constants for the refolding and the unfolding reactions in SDS-only solution at 30 degrees C revealed that the folded form of OmpA in SDS solution is less stable than the unfolding form, and that the unfolding is virtually unobservable near room temperature due to a high kinetic barrier.

The optimisation of the helix/helix interaction of a transmembrane dimer is improved by the IMPALA restraint field

A continuous membrane model (IMPALA) was previously developed to predict how hydrophobic spans of proteins insert in membranes (Mol. Mod. 2 (1996) 27). Using that membrane model, we looked for the interactions between several hydrophobic spans. We used the glycophorin A dimer as an archetype of polytopic protein to validate the approach. We find that the native complex do not dislocate when it is submitted to a 10(5) steps optimisation whereas separated spans converge back to a native-like complex in the same conditions. We also observe that IMPALA restraints are not strictly mandatory but do increase the efficiency of the procedure.

The assembly pathway of outer membrane protein PhoE of Escherichia coli

The assembly of the wild-type and several mutant forms of the trimeric outer membrane porin PhoE of Escherichia coli was investigated in vitro and in vivo. In in vivo pulse-chase experiments, approximately half of the wild-type PhoE molecules assembled within the 30-s pulse in the native conformation in the cell envelope. The other half of the molecules followed slower kinetics, and three intermediates in this multistep assembly process were detected: a soluble trypsin-sensitive monomer, a trypsin-sensitive monomeric form that was loosely associated with the cell envelope and a metastable trimer, which was integrated into the membranes and converted to the stable trimeric configuration within minutes. The metastable trimers disassembled during sample preparation for standard SDS/PAGE into folded monomers. In vitro, the isolated PhoE protein could efficiently be folded in the presence of N,N-dimethyldodecylamine-N-oxide (LDAO). A mutant PhoE protein, DeltaF330, which lacks the C-terminal phenylalanine residue, mainly followed the slower kinetic pathway observed in vivo, resulting in increased amounts of the various assembly intermediates. It appears that the DeltaF330 mutant protein is intrinsically able to fold, because it was able to fold in vitro with LDAO with similar efficiencies as the wild-type protein. Therefore, we propose that the conserved C-terminal Phe is (part of) a sorting signal, directing the protein efficiently to the outer membrane. Furthermore, we analysed a mutant protein with a hydrophilic residue introduced at the hydrophobic side of one of the membrane-spanning amphipathic beta strands. The assembly of this mutant protein was not affected in vivo or in vitro in the presence of LDAO. However, it was not able to form folded monomers in a previously established in vitro folding system, which requires the presence of lipopolysaccharides and Triton. Hence, a folded monomer might not be a true assembly intermediate of PhoE in vivo.

MOMP (major outer membrane protein) of Campylobacter jejuni; a versatile pore-forming protein

The great majority of trimeric porins of Gram-negative bacteria cannot be dissociated into monomers without disrupting their folded conformation. The porin of Campylobacter jejuni, however, displays two folded structures, a classical oligomer and a monomer resistant to detergent denaturation. We probed the transition of trimer to monomer using light scattering experiments and examined the secondary structures of these two molecular states by infra-red spectroscopy. The channel-forming properties of both trimer and monomer were studied after incorporation into artificial lipid bilayers. In these conditions, the trimer induced ion channels with a conductance value of 1200 pS in 1 M NaCl. The pores showed marked cationic selectivity and sensitivity to low voltage. Analysis of the isolated monomer showed nearly the same single-channel conductance and the same selectivity and sensitivity to voltage. These results indicate that the folded monomer form of C. jejuni MOMP displays essentially the same pore-forming properties as the native trimer.

Outer membrane protein A of E. coli folds into detergent micelles, but not in the presence of monomeric detergent

Outer membrane protein A (OmpA) of Escherichia coli is a beta-barrel membrane protein that unfolds in 8 M urea to a random coil. OmpA refolds upon urea dilution in the presence of certain detergents or lipids. To examine the minimal requirements for secondary and tertiary structure formation in beta-barrel membrane proteins, folding of OmpA was studied as a function of the hydrophobic chain length, the chemical structure of the polar headgroup, and the concentration of a large array of amphiphiles. OmpA folded in the presence of detergents only above a critical minimal chain length of the apolar chain as determined by circular dichroism spectroscopy and a SDS-PAGE assay that measures tertiary structure formation. Details of the chemical structure of the polar headgroup were unimportant for folding. The minimal chain length required for folding correlated with the critical micelle concentration in each detergent series. Therefore, OmpA requires preformed detergent micelles for folding and does not adsorb monomeric detergent to its perimeter after folding. Formation of secondary and tertiary structure is thermodynamically coupled and strictly dependent on the interaction with aggregated amphiphiles.

Beta-barrel proteins from bacterial outer membranes: structure, function and refolding

Recently solved outer membrane protein structures include the smallest and largest known beta-barrel structures, with functions distinct from the general and specific porins. Both protein expressed in outer membranes and protein deposited as cytoplasmic aggregates have been used for the structure determinations. As most beta-barrel proteins can be overexpressed in an aggregated form (inclusion bodies) and refolded to the native state, this provides an alternative to membrane-targeted expression strategies and yields sufficient quantities of protein for future structural studies.

Non-lamellar structure and negative charges of lipopolysaccharides required for efficient folding of outer membrane protein PhoE of Escherichia coli

Lipopolysaccharides (LPS) are amphiphilic molecules in the outer leaflet of the bacterial outer membrane. Recently, an early role for LPS in the folding of outer membrane porin PhoE was demonstrated in vitro. In order to elucidate the molecular mechanism of LPS-protein interactions, folding of PhoE protein was studied with a large set of well characterized LPS chemotypes. We demonstrate that negative charges in the inner core region contribute to the high efficiency of folding of PhoE protein. In addition, the supramolecular structure of the LPS aggregate seems to be important. LPS with a lipid A part that prefers a lamellar or a direct micellar structure and a high state of order of its acyl chains is much less efficient to support folding as compared with LPS with lipid A that prefers a non-lamellar structure and a low acyl chain order. These in vitro data indicate that extensive interactions between the core and lipid A region of LPS with the protein are required to support protein folding. The LPS-PhoE binding might be promoted by the presence of hydroxy fatty acids in the lipid A moiety of LPS.

Membrane protein folding

Investigating the in vitro refolding of proteins that naturally reside in biological membranes is a notoriously difficult task. Biophysical studies on model systems are beginning to provide a sound physical basis for membrane protein folding that should help to alleviate this problem. Highlights of these studies include insights into the interaction of transmembrane alpha helices, as well as into the important role that membrane lipids play in folding.

Characterization of the structure, function, and conformational stability of PorB class 3 protein from Neisseria meningitidis. A porin with unusual physicochemical properties

PorB proteins constitute the vast majority of channels in neisserial outer membranes and can be subdivided within meningococcal strains into two distinct and mutually exclusive families that are designated as class 2 and class 3 proteins. We recently characterized the functional activity and conformational stability of a PorB class 2 protein from Neisseria meningitidis (Minetti, C. A. S. A., Tai, J. Y., Blake, M. S., Pullen, J. K., Liang, S. M., and Remeta, D. P. (1997) J. Biol. Chem. 272, 10710-10720). To evaluate the structure-function relatedness among the PorB proteins, we have employed a combination of electrophoretic and spectroscopic techniques to assess the conformational stability of zwittergent-solubilized class 3 trimers. The functional, physicochemical, and structural properties of the meningococcal class 2 and class 3 proteins are comparable with the notable exception that the latter exhibits a significantly higher susceptibility to SDS. The SDS-induced dissociation and partial unfolding of PorB class 3 is characterized by a single two-state transition with a midpoint at 0.35% SDS. The native trimeric assembly dissociates reversibly, forming partially folded monomers that retain the characteristic beta-sheet content of the transmembrane domain with a concomitant increase in random coil structure arising from unfolding the rigid surface loops. These results provide new insight into the elucidation of porin folding pathways and the factors that govern the overall structural stability of meningococcal proteins.

Secondary structure of P-glycoprotein investigated by circular dichroism and amino acid sequence analysis

P-glycoprotein (Pgp) is a plasma membrane protein known as an ATP-dependent drug-efflux pump that confers multidrug resistance to tumor cells. Structural analysis of Pgp was investigated by circular dichroism (CD) for the first time and in combination with amino acid sequence analysis. CD of highly purified Pgp from human, rat and murine Pgp-overexpressing drug resistant cells revealed slight variations in the spectral shape when recorded in the presence of dodecyl maltoside (DM). These species-dependent variations in CD shapes resulted from the interaction of the oligosaccharidic part with the protein core since they were abolished either in the presence of sodium dodecyl sulfate (SDS) or after deglycosylation, the latter not altering the Pgp ATP-dependent drug transport activity. Whatever the level of Pgp glycosylation and the detergent used (SDS or DM), the content in secondary structure deduced from deconvolution of CD spectra is almost the same for the three sources of Pgp and estimated to 43% alpha-helix, 16% beta-sheet, 15% beta-turn and 26% of other structures. These data, which constitute the first report of Pgp structure analysis by circular dichroism, are consistent with the 48% alpha-helix and 16% beta-sheets global contents predicted by using recently reported efficient secondary structure prediction methods. This consistency reinforces the reliability of the probable nature and localization of predicted Pgp secondary structure elements. This provides a good framework for precise 3D structure modeling of Pgp by homology with proteins of known 3D structure, as it is illustrated here for the A motifs of the ATP-binding domains of Pgp.

Folding of beta-sheet membrane proteins: a hydrophobic hexapeptide model

Beta-sheets, in the form of the beta-barrel folding motif, are found in several constitutive membrane proteins (porins) and in several microbial toxins that assemble on membranes to form oligomeric transmembrane channels. We report here a first step towards understanding the principles of beta-sheet formation in membranes. In particular, we describe the properties of a simple hydrophobic hexapeptide, acetyl-Trp-Leu5 (AcWL5), that assembles cooperatively into beta-sheet aggregates upon partitioning into lipid bilayer membranes from the aqueous phase where the peptide is strictly monomeric and random coil. The aggregates, containing 10 to 20 monomers, undergo a relatively sharp and reversible thermal unfolding at approximately 60 degreesC. No pores are formed by the aggregates, but they do induce graded leakage of vesicle contents at very high peptide to lipid ratios. Because beta-sheet structure is not observed when the peptide is dissolved in n-octanol, trifluoroethanol or sodium dodecyl sulfate micelles, aggregation into beta-sheets appears to be an exclusive property of the peptide in the bilayer membrane interface. This is an expected consequence of the hypothesis that a reduction in the free energy of partitioning of peptide bonds caused by hydrogen bonding drives secondary structure formation in membrane interfaces. But, other features of interfacial partitioning, such as side-chain interactions and reduction of dimensionality, must also contribute. We estimate from our partitioning data that the free energy reduction per residue for aggregation is about 0.5 kcal mol-1. Although modest, its aggregate effect on the free energy of assembling beta-sheet proteins can be huge. This surprising finding, that a simple hydrophobic hexapeptide readily assembles into oligomeric beta-sheets in membranes, reveals the potent ability of membranes to promote secondary structure in peptides, and shows that the formation of beta-sheets in membranes is more facile than expected. Furthermore, it provides a basis for understanding the observation that membranes promote self-association of beta-amyloid peptides. AcWL5 and related peptides thus provide a good starting point for designing peptide models for exploring the principles of beta-sheet formation in membranes.

Folding alpha-helical membrane proteins: kinetic studies on bacteriorhodopsin

The correct folding and assembly of proteins within biological membranes is essential for membrane biogenesis and function. In contrast to the large body of work on water-soluble protein folding, however, very little is known about how membrane proteins fold to their final structures. Recent biophysical studies on membrane-protein folding in vitro are beginning to shed light on this problem. In particular, the forces that the membrane lipids impose on the folding protein appear to control certain events. The seven-helix transmembrane protein bacteriorhodopsin has been the focus of much attention and kinetic studies on the folding of this protein form the basis of this review.

Pathway of detergent-mediated and peptide ligand-mediated refolding of heterodimeric class II major histocompatibility complex (MHC) molecules

We investigated the mechanism of refolding and reassembly of recombinant alpha and beta chains of the class II major histocompatibility molecules (MHC-II) HLA-DRB5*0101. Both chains were expressed in the cytosol of Escherichia coli, purified in urea and SDS, and reassembled to functional heterodimers by replacement of SDS by mild detergents, incubation in a redox-shuffling buffer and finally by oxidation and removal of detergent. Refolding was mediated by mild detergents and by peptide ligands. Early stages of structure formation were characterized by circular dichroism, fluorescence, and time-resolved fluorescence anisotropy decay (FAD) spectroscopies. We found that formation of secondary structure was detectable after replacement of SDS by mild detergents. At that stage the alpha and beta chains were still monomeric, the buffer was strongly reducing, and the folding intermediates did not yet interact with peptide ligands. Formation of folding intermediates capable of interacting with peptide ligands was detected after adjusting the redox potential with oxidized glutathione and incubation in mild detergents. We conclude that at that stage a tertiary structure close to the native structure is formed at least locally. The nature and concentration of detergent critically determined the refolding efficiency. We compared detergents with different carbohydrate headgroups, and with aliphatic chains ranging from C6 to C14 in length. For each of the detergents we observed a narrow concentration range for mediating refolding. Surprisingly, detergents with long aliphatic chains had to be used at higher concentrations than short-chain detergents, indicating that increasing the solubility of folding intermediates is not the only function of detergents during a refolding reaction. We discuss structure formation and interactions of detergents with stable folding intermediates. Understanding such interactions will help to develop rational strategies for refolding hydrophobic or oligomeric proteins.

Stabilising and destabilising modifications of cysteines in the E. coli outer membrane porin protein OmpC

Three sulfhydryl labels were used to modify two mutated sites, R37C and R74C in the eyelet of the outer membrane porin OmpC. Modification of R37C with the neutral groups Aldrithiol and bimane increases thermal stability but the negatively charged iodoacetate causes a decrease in thermal stability. The effects of substitution at R74C were less significant. Bimane labelling increases the voltage sensitivity and decreases the single channel conductance at R37C asymmetrically with smaller channels being recorded at cis negative voltages. Negatively charged acetate does not affect the voltage gating.

Intermediates in the assembly of bacteriorhodopsin investigated by time-resolved absorption spectroscopy

The in vitro folding and assembly kinetics of bacteriorhodopsin have been studied by absorption spectroscopy. Folding is initiated by rapid stopped-flow mixing of denatured apoprotein (bacterio-opsin) in SDS micelles and mixed dimyristoylglycerophosphocholine/Chaps micelles containing retinal. The apparent mixing rate of the two types of micelles has been determined by time-resolving the changes in light scattering by the micelles. Micelle mixing appears to occur in two stages: a fast phase with an apparent rate constant of about 420 s-1, and a second phase with an apparent rate constant of about 10 s-1. A rate constant of similar magnitude to the latter has previously been assigned to a protein-folding event on the basis of protein fluorescence studies [Booth, P. J., Farooq, A. & Flitsch, S. L. (1996) Biochemistry 35, 5902-5909]. However the results presented here show that this rate constant may be associated with a rearrangement of the mixed detergent/lipid micelles. When the changes in the retinal absorption band are time-resolved during assembly of bacteriorhodopsin, a retinal-protein intermediate, with an absorption maximum of about 430 nm, has been identified. This absorption maximum lies between that of unbound retinal (at about 380 nm) and the native chromophore (at about 560 nm). A comparison of fluorescence and absorption data, together with previous evidence [Booth, P. J., Flitsch, S. L., Stern, L. J., Greenhalgh, D. A., Kim, P. S., & Khorana, H. G. (1995) Nat. Struct. Biol. 2, 139-143], suggests that the covalent Schiff-base link to retinal is not formed in the 430-nm-absorbing intermediate.

Structural and functional characterization of a recombinant PorB class 2 protein from Neisseria meningitidis. Conformational stability and porin activity

An outer membrane PorB class 2 protein from Neisseria meningitidis has been overexpressed in Escherichia coli, isolated from inclusion bodies, and refolded in the presence of zwitterionic detergent. The purified recombinant and native (strain M986) counterpart exhibit most of the typical functional and structural properties that are characteristic of bacterial porins. Channel forming activity has been monitored by incorporating class 2 into reconstituted liposomes and measuring the permeation rates of various oligosaccharides through the proteoliposomes to derive a pore diameter of approximately 1.6 nm. Structural studies employing a combination of spectroscopic and electrophoretic techniques reveal that recombinant and native class 2 are identical in terms of overall conformational stability. Both proteins form stable trimers in zwitterionic detergent and retain significant secondary and tertiary structure in the presence of SDS. The thermal unfolding of zwittergen-solubilized class 2 trimers (Tm = 88 degrees C) is reversible and characterized by solvent exposure of aromatic residues with concomitant disruption of tertiary and partial loss of secondary structures. SDS-induced destabilization and irreversible unfolding of the native trimeric assembly occurs at temperatures above 60 degrees C. Our physicochemical studies of PorB class 2 protein furnish significant insight regarding the structural and functional properties of this meningococcal outer membrane protein within the porin superfamily.

Conformational changes due to membrane binding and channel formation by staphylococcal alpha-toxin

Conformational changes occurring upon membrane binding and subsequent insertion of staphylococcal alpha-toxin were studied using complementary spectroscopic techniques. Experimental conditions were established where binding could be uncoupled from membrane insertion but insertion and channel formation seemed to be concomitant. Binding led to changes in tertiary structure as witnessed by an increase in tryptophan fluorescence, a red shift of the tryptophan maximum emission wavelength, and a change in the near UV CD spectrum. In contrast to what was observed for the soluble form of the toxin, 78% of the tryptophan residues in the membrane-bound form were accessible to the hydrophilic quencher KI. At this stage, the tryptophan residues were not in the immediate vicinity of the lipid bilayer. Upon membrane insertion, a second conformational change occurred resulting in a dramatic drop of the near UV CD signal but an increase of the far UV signal. Tryptophan residues were no longer accessible to KI but could be quenched by brominated lipids. In the light of the available data on channel formation by alpha-toxin, our results suggest that the tryptophan residues might be dipping into the membrane in order to anchor the extramembranous part of the channel to the lipid bilayer.