4-Thialaminine, a Strongly Basic Chemical Modification of Cysteine

A simple and robust method for determining the number of basic sites in peptides and proteins using electrospray ionization mass spectrometry

A solution additive has been discovered that can be used to measure the number of basic sites in a peptide or protein using electrospray ionization (ESI) mass spectrometry. Addition of millimolar amounts of perchloric acid (HClO(4)) to aqueous solutions that contain peptides or proteins results in the noncovalent adduction of HClO(4) molecules to the multiply charged ions formed by ESI. For 18 oligopeptides and proteins, ranging in molecular weight from 0.5 to 18.3 kDa, the sum of the number of protons plus maximum number of HClO(4) molecules adducted to the lower charge state ions is equal to the number of basic sites in the molecule. This method provides a rapid means of obtaining information about the composition of a peptide or protein and does not require high-resolution measurements or any instrumental or experimental modifications.

The site-specific installation of methyl-lysine analogs into recombinant histones

Histone lysine residues can be mono-, di-, or trimethylated. These posttranslational modifications regulate the affinity of effector proteins and may also impact chromatin structure independent of their role as adaptors. In order to study histone lysine methylation, particularly in the context of chromatin, we have developed a chemical approach to install analogs of methyl lysine into recombinant proteins. This approach allows for the rapid generation of large quantities of histones in which the site and degree of methylation can be specified. We demonstrate that these methyl-lysine analogs (MLAs) are functionally similar to their natural counterparts. These methylated histones were used to examine the influence of specific lysine methylation on the binding of effecter proteins and the rates of nucleosome remodeling. This simple method of introducing site-specific and degree-specific methylation into recombinant histones provides a powerful tool to investigate the biochemical mechanisms by which lysine methylation influences chromatin structure and function.

C-terminal sequence determination of modified peptides by MALDI MS

Peptides, cleaved by a mixture of carboxypeptidases CPP and CPY, can be detected by MALDI MS and the amino acid sequence thereby determined by calculation of the differences between consecutive peaks. In the present study we have used derivatizations of Lys and Cys to facilitate identification of these residues. Since the mass values do not readily distinguish Lys from Gln, we have converted Lys to homoarginine by guanidination, allowing simple detection of Lys. To identify the Cys positions in peptides that contain cystine, cysteic acid, or carboxymethylcysteine is not possible using CPY and CPP because of the lack of proteolytic cleavage. Instead we find that identification of Cys residues within the sequence can be achieved after conversion to a basic derivative, 4-thialaminine (Thi), by trimethylaminoethylation.

Use of site-directed chemical modification to study an essential lysine in Escherichia coli leader peptidase

Escherichia coli leader peptidase, which catalyzes the cleavage of signal peptides from pre-proteins, is an essential, integral membrane serine peptidase that has its active site residing in the periplasmic space. It contains a conserved lysine residue that has been proposed to act as the general base, abstracting the proton from the side chain hydroxyl group of the nucleophilic serine 90. To help elucidate the role of the essential lysine 145 in the activity of E. coli leader peptidase, we have combined site-directed mutagenesis and chemical modification methods to introduce unnatural amino acid side chains at the 145-position. We show that partial activity can be restored to an inactive K145C leader peptidase mutant by reacting it with 2-bromoethylamine.HBr to produce a lysine analog (gamma-thia-lysine) at the 145-position. Modification with the reagents 3-bromopropylamine.HBr and 2-mercaptoethylamine also allowed for partial restoration of activity showing that there is some flexibility in the length requirements of this essential residue. Modification with (2-bromoethyl)trimethylammonium.Br to form a positively charged, nontitratable side chain at the 145-position failed to restore activity to the inactive K145C leader peptidase mutant. This result, along with an inactive K145R mutant result, supports the claim that the lysine side chain at the 145-position is essential due to its ability to form a hydrogen bond(s) or to act as a general base rather than because of an ability to form a critical salt bridge. We find that leader peptidase processes the pre-protein substrate, pro-OmpA nuclease A, with maximum efficiency at pH 9.0, and apparent pKa values for titratable groups at approximately 8.7 and 9.3 are revealed. We show that the lysine modifier maleic anhydride inhibits leader peptidase by reacting with lysine 145. The results of this study are consistent with the hypothesis that the lysine at the 145-position of leader peptidase functions as the active site general base. A model of the active site region of leader peptidase is presented based on the structure of the E. coli UmuD', and a mechanism for bacterial leader peptidase is proposed.

C-terminal sequence analysis of peptides and proteins using carboxypeptidases and mass spectrometry after derivatization of Lys and Cys residues

C-Terminal sequence analysis of peptides and proteins using carboxypeptidase digestion in combination with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is convenient for protein and peptide characterization. After a short digestion, a sequence up to 20 residues can be identified, but the total number depends on the individual sequence. Due to the accuracy limits of the MALDI time-of-flight arrangement, the assignment of several residues with close mass values, including Lys/Glx, may remain ambiguous. We have used derivatization of lysine residues by guanidination to overcome the problem of Lys identification. The reaction is rapid and specific and results in full derivatization. In the case of Cys-containing peptides, problems arise from the fact that carboxypeptidases Y and P do not cleave peptides that contain nonderivatized cystine, cysteic acid, or (carboxymethyl)cysteine. Successful identification of Cys residues within the sequence is instead achieved by conversion of Cys to 4-thialaminine by (trimethylamino)-ethylation. The two derivatizations of Lys and Cys side chains provide opportunities for proton attachment and therefore facilitate the analysis by MALDI-MS. This C-terminal sequence analysis method is also useful for large proteins after fragmentation with specific enzymes.

Nuclear transition protein 2 (TP2) of mammalian spermatids has a very basic carboxyl terminal domain

Nuclear transition protein 2 (TP2) along with TP1 are major basic chromosomal proteins of rat spermatids during the period of transition from histone-associated to protamine-associated DNA. TP2 isolated by reversed phase high pressure liquid chromatography was cleaved with S. aureus V8 protease to yield two fragments. The complete amino acid sequence of the 27 residue peptide assigned to the carboxyl terminus was established. It contains most of the basic residues of the protein and is likely to be a major site of DNA binding. Thus, TP2 is differentiated from core histones in having its basic domain at the carboxyl rather than amino terminal end.

Amino acid composition analysis of minute amounts of cysteine-containing proteins using 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-fluoro-7-nitro-2,1,3-benzoxadiazole in combination with HPLC

The simultaneous determination of amino acid composition including cysteine of egg albumin, a model protein containing a/s cysteine residue, is reported. All the thiol groups of the cysteine residue(s) of egg albumin were labelled with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole, a fluorogenic reagent for thiol groups. The labeled egg albumin was hydrolyzed in 6N HCl at 110 degrees C for 24 h. The hydrolysate was lyophilized, derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole, a fluorogenic reagent for amines, and subjected to HPLC. 18 derivatized amino acids including double labelled cysteine were separated within 90 min on a Nucleosil ODS column (150 mm X 4.6 mm i.d.; 5 microns), and detected at 530 nm (ex. 470 nm) in a range from 90 fmol (aspartic acid) to 1.3 pmol (cysteine) (S/N = 3). Composition ratios of amino acids of egg albumin were similar to theoretical values except for methionine, which would be destroyed under the present acid hydrolysis condition. Analytical methods for cysteine residues are reviewed, and the availability of fluorogenic reagents having the benzofurazan structure is also discussed.

The complete primary structure of phospholipase A2 from human pancreas

The complete amino acid sequence of phospholipase A2 (phosphatide 2-acylhydrolase, EC 3.1.1.4) from human pancreas was determined. The protein consists of a single polypeptide chain of 125 amino acids and has a molecular weight of 14003. The chain is cross-linked by seven disulfide bridges. The main fragmentation of the polypeptide chain was accomplished by digestion of the reduced and thialaminated derivative of the protein with clostripain, yielding three fragments. The largest fragment (residues 7-100) was further degraded both with staphylococcal proteinase and chymotrypsin. The sequence was determined by automated Edman degradation of the intact protein and of several large peptide fragments. Phospholipase A2 from human pancreas contains the same number of amino acids (125) as the enzyme from horse, while the enzymes from pig and ox contain 124 and 123 residues, respectively. The enzymes show a high degree of homology; human phospholipase differs from the other enzymes by substitutions of 26 (porcine), 28 (bovine) and 32 (equine) residues, respectively.

A discontinuous electrophoretic system for separating peptides on polyacrylamide gels

An electrophoretic system for separating, with high resolution, peptides 25-250 residues in length is described. The peptides are stacked by discontinuous electrophoresis to form very sharp bands at the origin. They are then separated on a matrix of 20% polyacrylamide, 8 M urea, and 0.1% dodecyl sulfate. Through this combination, high resolution and clean separation, based on polymer length, are achieved.

Modification of carboxylate groups in bovine pancreatic phospholipase A2. Identification of aspartate-49 as Ca2+-binding ligand

Carboxylase groups in bovine pancreatic phospholipase A2 were modified using a water-soluble carbodiimide and semicarbazide. At pH 5.5 rapid modification of 13 out of the total of 15 carboxylates occurred, leaving Asp-39 and Asp-99 unmodified. Subsequent modification with radioactive semicarbazide at pH 3.5 resulted in the labelling of Asp-39. In the modified proteins both Ca2+ binding and enzymatic activity are completely lost. Modification of the enzyme at pH 5.5 in the presence of Ca2+ ions yielded a protein with three unmodified carboxylates which is capable of binding Ca2+ ions, while 15% residual activity was found. A second reaction, using [14C]semicarbazide at pH 5.5 in the absence of Ca2+, leads to the incorporation of one mole of [14C]semicarbazide/mole of protein with loss of enzymatic activity and Ca2+ binding. The label was found to be attached to Asp-49, demonstrating the essential role of Asp-49 in Ca2+ binding. Studies on the pH dependence of the Ca2+ binding to the protein suggested that Asp-49 has an apparent pK of 5.2.

The primary structure of phospholipase A2 from porcine pancreas. A reinvestigation

The primary structure of porcine pancreatic phospholipase A2 (EC 3.1.1.4) has been reinvestigated. A number of modifications have been introduced including the addition of a 7th disulfide bridge. The structure which is presented here shows a high degree of homology with the amino acid sequence of snake venom and horse pancreas phospholipase A2.