Preparation and use of synthetic cell culture surfaces. A new reagent for the covalent immobilization of proteins and glycoproteins on a nonionic inert matrix

A method of binding kinetics of a ligand to micropatterned proteins on a microfluidic chip

A combination of microfluidic protein patterning and quantitative microfluidic handling has been used to analyze the binding kinetics of protein-ligand interactions on the nanoliter scale. The microfluidic handling method employing hydrophobic valving and pneumatic control allowed us to control nanoliter volumes of ligand or protein on a microfluidic chip. A hydrophobic and inert fluorocarbon thin film was patterned on a silicon nitride substrate to prevent non-specific binding on the background. Selectively patterned protein patterns of various sizes were used for quantitative analysis of the kinetic parameters of immobilized proteins on the circular patterns. As a model system, a streptavidin-patterned array of the same-sized pattern, i.e. 150 microm diameter, was used to capture FITC-BSA-biotin present in solution. The fluorescence intensity was well matched with the Langmuir isotherm model results, showing a dissociation constant of 2.43x10(-8)M. Similar streptavidin arrays with different-sized spots, ranging from 50 to 200 microm, showed a consistent dissociation constant of FITC-BSA-biotin with streptavidin pattern. Therefore, the reduction of pattern size of an immobilized protein did not change the dissociation rate of the ligand.

Sequential robust design methodology and X-ray photoelectron spectroscopy to analyze the grafting of hyaluronic acid to glass substrates

Sequential Robust Design experiments and X-ray photoelectron spectroscopic (XPS) studies were performed to examine the immobilization of hyaluronic acid (HA) on glass substrates chemisorbed with N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS). Numerous reaction conditions were investigated, including the concentrations of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), N-hydroxysulfosuccinimide (Sulfo-NHS), and HA, and the reaction buffer type, concentration, and pH. The elemental surface compositions of carbon and silicon (C/Si ratio) were used to assess the extent of HA immobilization, leading to the identification of critical HA-binding reaction conditions and the determination of an optimum surface chemistry. The optimum chemistry consisted of 200 mM EDC, 50 mM Sulfo-NHS, 10 mM N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer at a pH of 7.0, and 3 mg/mL HA. This work emphasizes the advantages of using Robust Design methods over traditional statistical experimental design, particularly when large numbers of variables are examined and costly analytical techniques are employed.

Preparation and release of ibuprofen from polyacrylamide gels

The conditions of preparation of polyacrylamide (polyAC) gels, the incorporation of ibuprofen (IB), and the kinetics of IB release under various conditions have been evaluated. Transparent, opaque, or elastic gels were prepared depending on the concentration of acrylamide (AC) and the cross-linking agent, N,N'-methylenebisacrylamide (BIS). Release studies in media below pH 5.0 resulted in opaque gels. The kinetics of IB release was a function of the AC, BIS, and the pH of the medium, but the optimum composition, in terms of gel integrity and release characteristics, was 7% AC cross-linked with BIS at a 50:1 ratio. Modulation of the release rate was possible with the incorporation of 10% of certain polymers. The amount of IB that could be incorporated per gram of transparent gel was a function of the amount of polymer initiator N,N,N',N'-tetramethylene diamine (TEMED) used per gram of gel. More than 200 mg of IB could be incorporated per gram of transparent gel by using 100 microliters of TEMED. The release of IB obeyed matrix/swelling-controlled kinetics and 70-80% of the IB was released from gels containing 10 to 40 mg IB per gram of gel in 5 hr at pH 7.4 and 37 degrees C.

Hepatocyte culture on carbohydrate-modified star polyethylene oxide hydrogels

We describe the synthesis and in vitro biological characterization of a new class of carbohydrate-modified hydrogels based on radiation-cross-linked star polyethylene oxide (PEO). Hydrogels were synthesized from either of two types of PEO star molecules in order to vary the terminal hydroxyl content of the gels while keeping other gel properties such as molecular weight between cross-links and water content constant. The resulting gels were covalently modified with monosaccharide ligands and the behaviour of primary rat hepatocytes on the modified gels was evaluated under culture conditions. Hepatocytes exhibited a sugar-specific adhesion to the modified gels, adhering to gels bearing galactose but not glucose. Cell spreading was observed on both types of galactose-modified PEO star gels; moreover, the gels supported long-term (6 d) culture and differentiated function of primary hepatocytes. Further, on comparing the cell spreading behaviour observed on the PEO star gels with that reported previously for galactose-modified polyacrylamide, we find that our gels elicit spreading at ligand concentrations lower by an order of magnitude. A simple mechanistic analysis indicates that this enhanced ability of PEO star gels to support spreading of primary hepatocytes on low concentrations of immobilized galactose derives from freedom of the immobilized ligands to come within sufficiently close proximity to mimic a high-affinity branched oligosaccharide.

A novel artificial substrate for cell culture: effects of substrate flexibility/malleability on cell growth and morphology

Gels of glyoxyl agarose (GA) are evaluated as a novel flexible substrate for cell culture with physical properties comparable to extracellular matrix (ECM) gels. We show here that cells adhere well to pure GA gels; in addition, specific interactions involving matrix receptors can be studied when individual matrix molecules are bound to the gel covalently. When cells are grown on such substrates, morphology is comparable to that observed on "natural" matrix gels (reconstituted gels of collagen type I or of Matrigel): rather than being flattened as in monolayer cultures on tissue culture plastic the cells assume a rounded morphology and tend to form tissue-like aggregates. The effects of the artificial matrix gels are discussed in the context of previous publications on cell interactions with the extracellular matrix, suggesting that in addition to specific recognition of matrix molecules the physical properties of ECM by themselves can be decisive for cell differentiation. We conclude that gels of glyoxyl agarose a) provide a useful model to mimic the physical properties of matrix gels without the presence of specific adhesion factors; b) may be useful as a general, non-specific ECM allowing cells to be cultured in vitro under conditions favorable for differentiation; and c) allow to design a variety of "synthetic" ECM models composed of a chemically defined gel matrix, which can be supplemented with covalently bound molecules to be recognized by cell surface receptors.

Glycidyl acrylate plasma glow discharged polymers

A homogeneous glycidyl acrylate polymer (GAP) has been grafted on to polytetrafluoroethylene (PTFE) and polyethylene (PE) using a modified plasma glow discharge technique with glycidyl acrylate. The polymeric layer appears to be extremely stable to acidic media and to common organic solvents. The modified surface can be derivatized via epoxy groups with hydroxy and amino compounds including sugars and amino sugars. These derivatized surfaces have been characterized by Fourier transform infrared (FTIR) spectroscopy and contact angle measurements. The wide variety of compounds which can be attached provides flexibility in the design of surfaces for the study of a range of biological interactions.

Biocompatibility of polyacrylamide microcapsules implanted in peritoneal cavity or spleen of the rat. Effect on various inflammatory reactions in vitro

The biocompatibility of polyacrylamide microcapsules was investigated by implanting microcapsules in the peritoneal cavity or the spleen of rats. The capsules were retrieved every four weeks for twenty weeks. They remained isolated and free in the peritoneal cavity, but led to a slight inflammatory reaction in the spleen. These results were confirmed, in vitro, by determinations of chemiluminescence and interleukin I levels, and by evaluation of attachment and growth of human fibroblasts. The microcapsules did not enhance these inflammatory reactions, and they were a poor support for cellular proliferation.

Synthetic hydrogel microspheres as substrata for cell adhesion and growth

Cross-linked poly(methyl methacrylate) (PMMA) microspheres were subjected to alkaline hydrolysis to obtain hydrophilic microspheres having carboxyl residues distributed throughout the matrix. These microspheres were found to support the growth of human skin fibroblasts and human heart and lung cells. Further, fibroblasts grown on them were found to be comparable with those grown on the commercial tissue culture plate with respect to [14C]amino acid uptake and incorporation into proteins. The hydrolyzed PMMA microspheres may find application as a microcarrier for cell culture.