Is there a haemodynamic advantage associated with cuffed arterial anastomoses?

Computational estimation of fluid mechanical benefits from a fluid deflector at the distal end of artificial vascular grafts

Intimal hyperplasia at the distal anastomosis is considered to be an important determinant for arterial and arteriovenous graft failure. The connection between unhealthy hemodynamics and intimal hyperplasia motivates the use of computational fluid dynamics modeling to search for improved graft design. However, studies on the fluid mechanical impact on intimal hyperplasia at the suture line intrusion have previously been scanty. In the present work, we focus on intimal hyperplasia at the suture line and illustrate potential benefits from the introduction of a fluid deflector to shield the suture line from unhealthily high wall shear stress.

Neointimal hyperplasia associated with synthetic hemodialysis grafts

Stenosis is a major cause of failure of hemodialysis vascular grafts and is primarily caused by neointimal hyperplasia (NH) at the anastomoses. The objective of this article is to provide a scientific review of the biology underlying this disorder and a critical review of the state-of-the-art investigational preventive strategies in order to stimulate further research in this exciting area. The histology of the NH shows myofibroblasts (that are probably derived from adventitial fibroblasts), extracellular matrices, pro-inflammatory cells including foreign-body giant cells, a variety of growth factors and cytokines, and neovasculature. The contributing factors of the pathogenesis of NH include surgical trauma, bioincompatibility of the synthetic graft, and the various mechanical stresses that result from luminal hypertension and compliance mismatch between the vessel wall and graft. These mechanical stimuli are focal in nature and may have a significant influence on the preferential localization of the NH. Novel mechanical graft designs and local drug delivery strategies show promise in animal models in preventing graft NH development. Successful prevention of graft stenosis would provide a superior alternative to the native fistula as hemodialysis vascular access.

A parametric numerical investigation on haemodynamics in distal coronary anastomoses

Anastomotic haemodynamics, which plays an important role in the performance of bypass graft, is known to be profoundly affected by the diameter ratio (Phi) and angle (alpha) between the graft and host artery in the peripheral region. We hypothesize that these geometric factors would play similar roles in distal coronary anastomoses and that they could be improved for clinical applications through parametric studies. Anastomotic models covering a range of Phi (1:1, 1.5:1 and 2:1) and alpha (15 degrees , 30 degrees , 45 degrees and 60 degrees ) were investigated numerically in physiological coronary flow conditions. The transient flow patterns, cycle-averaged wall shear stress (WSS), oscillatory shear index (OSI), spatial and temporal WSS gradients (SWSSG and TWSSG) were compared. Results show a stronger influence of Phi than alpha on haemodynamics in distal coronary artery anastomoses. Substantially higher SWSSG and TSSWG occur on the artery floor when Phi=1:1 compared to larger Phi. High levels of OSI occur in critical regions when Phi=1:1 and 2:1. The largest area of high OSI is found in the anastomotic region when alpha=15 degrees , whereas the highest level of SWSSG appears on the artery floor when alpha=60 degrees . The study suggests the clinical relevance of optimizing geometric parameters of coronary anastomoses to improve their haemodynamic performance. We speculate that for a distal coronary anastomosis with a 20:80 proximal-distal flow division ratio maintained in the host artery, Phi=1.5 and alpha=30-45 degrees would enhance its long-term performance.

Impact of in vivo ranges of the variances in the flow velocity waveforms and flow split ratio on the hemodynamic effects of the anastomotic cuff at distal end-to-side anastomosis

PURPOSE

The blood flow inside distal end-to-side anastomoses may be affected by inlet flow velocity profiles and outlet blood distribution ratios. This study investigated the in vivo range of these variables and their impact on the hemodynamic effects of an anastomotic cuff using a computational fluid dynamics approach.

MATERIALS AND METHODS

Predesigned expanded polytetrafluoroethylene cuffed grafts were used in 22 femoropopliteal bypasses and straight grafts were used for 10 cases. The flow distribution was examined by angiographic techniques and the inlet flow velocity was determined by a spectral Doppler method.

RESULTS

The caudal outflow distribution ratio was 95.6% +/- 7.2% (75%-100%). The positive peak flow velocity was 1.66 +/- 0.25 m/s. The ratio of the absolute value of the negative to positive peak velocity was 0.32 +/- 0.12. The cuff increased wall shear stress along the artery floor regardless of the flow velocity profiles at 100% of the caudal distribution ratio but not at 75%.

CONCLUSION

The hemodynamics inside the anastomosis were thus found to be affected by these flow variables. The proper indications for the cuff should therefore not be decided based simply on the location of the anastomosis without taking the fluid dynamic factors in the vicinity of the anastomosis into full consideration.

Computational modeling of vascular anastomoses

Recent development of computational technology allows a level of knowledge of biomechanical factors in the healthy or pathological cardiovascular system that was unthinkable a few years ago. In particular, computational fluid dynamics (CFD) and computational structural (CS) analyses have been used to evaluate specific quantities, such as fluid and wall stresses and strains, which are very difficult to measure in vivo. Indeed, CFD and CS offer much more variability and resolution than in vitro and in vivo methods, yet computations must be validated by careful comparison with experimental and clinical data. The enormous parallel development of clinical imaging such as magnetic resonance or computed tomography opens a new way toward a detailed patient-specific description of the actual hemodynamics and structural behavior of living tissues. Coupling of CFD/CS and clinical images is becoming a standard evaluation that is expected to become part of the clinical practice in the diagnosis and in the surgical planning in advanced medical centers. This review focuses on computational studies of fluid and structural dynamics of a number of vascular anastomoses: the coronary bypass graft anastomoses, the arterial peripheral anastomoses, the arterio-venous graft anastomoses and the vascular anastomoses performed in the correction of congenital heart diseases.

Interposition Vein Cuff and Intimal Hyperplasia: An Experimental Study

OBJECTIVE

There is some evidence to suggest that prosthetic distal bypass graft patency can be improved, and the risk of intimal hyperplasia diminished, by interposing a distal vein cuff. We studied intimal remodeling in an end-to-side distal prosthetic anastomosis constructed with and without a vein cuff.

METHODS

Twenty-four prosthetic bypasses were constructed with (N=12) or without (N=12) a distal vein cuff in 12 pigs. At 10 weeks, the 20 anastomoses and adjacent arteries from the surviving 10 pigs were studied by histology, immunohistochemistry and morphometry.

RESULTS

Intimal hyperplasia was significantly less on all zones of the arterial floor and all suture zone of arteries anastomosed with a vein cuff than within arteries anastomosed without a vein cuff (0.11 versus 0.34; p=0.001 and 0.35 versus 1.19; p=0.0001, respectively). Intimal hyperplasia was also more prominent within the vein cuff than within the recipient artery, with or without a vein cuff (1.35 versus 0.38; p=0.0001).

CONCLUSION

An interposition vein cuff at the distal anastomosis between a prosthesis and an artery alters the distribution of intimal hyperplasia. By acting as an expansion chamber where intimal hyperplasia can develop harmlessly, the vein cuff may protect the arterial anastomosis from stenosis.

Particle hemodynamics analysis of Miller cuff arterial anastomosis

OBJECTIVE

Studies of animal and human below-knee anastomoses with Miller cuffs indicate that improved graft patency results from redistribution of intimal hyperplasia away from areas critical to flow delivery, such as the arterial toe. We hypothesize that particle hemodynamic conditions are a biophysical mechanism potentially responsible for the clinically observed shift in intimal hyperplasia localization associated with better patency of the Miller configuration.

METHODS

Computational fluid dynamics analysis of vortical flow patterns, wall shear stress fields, and potential for platelet interaction with the vascular surface was performed for realistic three-dimensional conventional and Miller cuff distal end-to-side anastomoses. Sites of significant platelet-wall interaction, including elevated near-wall particle concentrations and stasis, were identified with a validated near-wall residence time model, which includes shear stress-based factors for particle activation and surface reactivity.

RESULTS

Particle hemodynamics largely coincide with the observed redistribution of intimal hyperplasia away from the critical arterial toe region. Detrimental changes in wall shear stress vector magnitude and direction are significantly reduced along the arterial suture line of the Miller cuff, largely as a result of increased anastomotic area available for flow redirection. However, because of strong particle-wall interaction, resulting high near-wall residence time contours indicate significant intimal hyperplasia along the graft-vein suture line and in the vicinity of the arterial heel.

CONCLUSIONS

While a number of interacting mechanical, biophysical, and technical factors may be responsible for improved Miller cuff patency, our results imply that particle hemodynamics conditions engendered by Miller cuff geometry provide a mechanism that may account for redistribution of intimal hyperplasia. In particular, it appears that a focal region of significant particle-wall interaction at the arterial toe is substantially reduced with the Miller cuff configuration.