A model for loading-dependent growth, development, and adaptation of tendons and ligaments

Treatment of knee osteochondritis dissecans with autologous tendon transplantation: Clinical and radiological results

BACKGROUND

Defect treatment with tendon autograft in osteochondral lesions has been published in the literature with an experimental study in dogs. To demonstrate that it is possible to treat knee osteochondral lesions with the technique of autologous tendon transplantation.

AIM

To evaluate the clinical and radiological results of patients with knee osteochondral lesions who were treated with autologous tendon transplantation.

METHODS

Twenty patients (22 knees) with osteochondritis dissecans (OCD) lesions involving the knee were treated with autologous tendon transplantation between 2005-2018. All lesions were International Cartilage Repair Society grade IV. All patients were evaluated clinically at final follow-up with knee injury and osteoarthritis outcome score (KOOS); and radiologically with magnetic resonance observation and cartilage repair tissue (MOCART) and Kellgren-Lawrence (KL) classification.

RESULTS

A total of 20 patients (22 knees) with a mean age of 25.5± 6.8 years were included. The average defect size was 4.2 ± 2.1 cm², and the average defect depth was 0.9 ± 0.4 cm. Total KOOS score was preoperatively 29.4 ± 5.5 and was later found to be 81.5 ± 5.9 after an average of 68.7 ± 37.7 mo follow-up. The mean MOCART score was 56.2 ± 10.7. Preoperatively, all of the patients had KL grades of 0–1; during the follow-up period, 80% of the patients showed no radiological progress of osteoarthritis. Patients with less than 4 cm² lesion had statistically significantly better overall KOOS than patients whose more than 4 cm² lesion, particularly in sport and quality of life subscales.

CONCLUSION

The autologous tendon transplantation is a single-step, safe, simple, cost-effective method for the treatment of knee OCD with satisfactory clinical and radiological outcomes, particularly in patients with less than 4 cm² lesion.

Navicular Syndrome-related changes to collagen proportion of different cross-sections of the flexor tendons in equine distal forelimb

The aim of this study was to quantify the distribution of aligned and non-aligned collagen in cross-sections of the superficial digital flexor tendon (SDFT) and deep digital flexor tendon (DDFT) in different levels of the distal forelimb of equines diagnosed with NS (Navicular Syndrome). Sixty equine forelimbs were collected. Was compared two groups (NA, Not affected vs. NS-group) by t-Student. Diagnosis of NS was based on clinical and lameness examination, diagnostic analgesia and radiological findings. The proportion of aligned and non-aligned collagens at 2 levels for the SDFT and 3 levels for the DDFT were measured by histochemical stains. The amount of aligned and non-aligned collagen in tendons were calculated using Colour-Based Segmentation function. Regarding collagen, there were significant differences in the amount of aligned collagen (NA: 21.2 ± 1.31; NS-group: 12.2 ± 4.67; p = 0.0026) and non-aligned collagen (NA: 21.8 ± 2.22; NS: 25.1 ± 1.73; p = 0.0241) at the DDFT insertion in the distal phalanx. We concluded that the flexor tendons of the forelimb in equines with NS have different proportions of collagen than those that do not present the diagnosis, indicated by histologically visible increased proportions of non-aligned collagen and decreased of aligned collagen in the extracellular matrix.

Altering the Mechanical Load Environment During Growth Does Not Affect Adult Achilles Tendon Properties in an Avian Bipedal Model

Tendon mechanical properties respond to altered load in adults, but how load history during growth affects adult tendon properties remains unclear. To address this question, we adopted an avian model in which we altered the mechanical load environment across the growth span. Animals were divided at 2 weeks of age into three groups: (1) an exercise control group given the opportunity to perform high-acceleration movements (EXE, n = 8); (2) a sedentary group restricted from high-intensity exercise (RES, n = 8); and (3) a sedentary group also restricted from high-intensity exercise and in which the gastrocnemius muscles were partially paralyzed using repeated bouts of botulinum toxin-A injections (RES-BTX, n = 8). Video analysis of bird movement confirmed the restrictions eliminated high-intensity exercise and did not alter time spent walking and sitting between groups. At skeletal maturity (33–35 weeks) animals were sacrificed for analysis, consisting of high-field MRI and material load testing, of both the entire free Achilles tendon and the tendon at the bone-tendon junction. Free tendon stiffness, modulus, and hysteresis were unaffected by variation in load environment. Further, the bone-tendon junction cross-sectional area, stress, and strain were also unaffected by variations in load environment. These results suggest that: (a) a baseline level of low-intensity activity (standing and walking) may be sufficient to maintain tendon growth; and (b) if this lower threshold of tendon load is met, non-mechanical mediated tendon growth may override the load-induced mechanotransduction signal attributed to tendon remodeling in adults of the same species. These results are important for understanding of musculoskeletal function and tendon health in growing individuals.

RGD inhibition of itgb1 ameliorates laminin-α2-deficient zebrafish fibre pathology

Deficiency of muscle basement membrane (MBM) component laminin-α2 leads to muscular dystrophy congenital type 1A (MDC1A), a currently untreatable myopathy. Laminin--α2 has two main binding partners within the MBM, dystroglycan and integrin. Integrins coordinate both cell adhesion and signalling; however, there is little mechanistic insight into integrin's function at the MBM. In order to study integrin's role in basement membrane development and how this relates to the MBM's capacity to handle force, an itgβ1.b-/- zebrafish line was created. Histological examination revealed increased extracellular matrix (ECM) deposition at the MBM in the itgβ1.b-/- fish when compared with controls. Surprisingly, both laminin and collagen proteins were found to be increased in expression at the MBM of the itgβ1.b-/- larvae when compared with controls. This increase in ECM components resulted in a decrease in myotomal elasticity as determined by novel passive force analyses. To determine if it was possible to control ECM deposition at the MBM by manipulating integrin activity, RGD peptide, a potent inhibitor of integrin-β1, was injected into a zebrafish model of MDC1A. As postulated an increase in laminin and collagen was observed in the lama2-/- mutant MBM. Importantly, there was also an improvement in fibre stability at the MBM, judged by a reduction in fibre pathology. These results therefore show that blocking ITGβ1 signalling increases ECM deposition at the MBM, a process that could be potentially exploited for treatment of MDC1A.

A biomechanical model for fibril recruitment: Evaluation in tendons and arteries

Simulations of soft tissue mechanobiological behaviour are increasingly important for clinical prediction of aneurysm, tendinopathy and other disorders. Mechanical behaviour at low stretches is governed by fibril straightening, transitioning into load-bearing at recruitment stretch, resulting in a tissue stiffening effect. Previous investigations have suggested theoretical relationships between stress-stretch measurements and recruitment probability density function (PDF) but not derived these rigorously nor evaluated these experimentally. Other work has proposed image-based methods for measurement of recruitment but made use of arbitrary fibril critical straightness parameters. The aim of this work was to provide a sound theoretical basis for estimating recruitment PDF from stress-stretch measurements and to evaluate this relationship using image-based methods, clearly motivating the choice of fibril critical straightness parameter in rat tail tendon and porcine artery. Rigorous derivation showed that the recruitment PDF may be estimated from the second stretch derivative of the first Piola-Kirchoff tissue stress. Image-based fibril recruitment identified the fibril straightness parameter that maximised Pearson correlation coefficients (PCC) with estimated PDFs. Using these critical straightness parameters the new method for estimating recruitment PDF showed a PCC with image-based measures of 0.915 and 0.933 for tendons and arteries respectively. This method may be used for accurate estimation of fibril recruitment PDF in mechanobiological simulation where fibril-level mechanical parameters are important for predicting cell behaviour.

Innovations and pitfalls in the use of wearable devices in the prevention and rehabilitation of running related injuries

Running-related injuries are common and are associated with a high rate of reoccurrence. Biomechanics and errors in applied training loads are often cited as causes of running-related injuries. Clinicians and runners are beginning to utilize wearable technologies to quantify biomechanics and training loads with the hope of reducing the incidence of running-related injuries. Wearable devices can objectively assess biomechanics and training loads in runners, yet guidelines for their use by clinicians and runners are not currently available. This article outlines several applications for the use of wearable devices in the prevention and rehabilitation of running-related injuries. Applications for monitoring of training loads, running biomechanics, running epidemiology, return to running programs and gait retraining are discussed. Best-practices for choosing and use of wearables are described to provide guidelines for clinicians and runners. Finally, future applications are outlined for this rapidly developing field.

Restrained Differential Growth: The Initiating Event of Adolescent Idiopathic Scoliosis?

STUDY DESIGN

An experimental model study and a short review of literature.

OBJECTIVE

The purpose of this study was to explore a new hypothesis suggesting that the curvatures seen in adolescent idiopathic scoliosis (AIS) originate from restrained differential growth between the vertebral column and the surrounding musculo-ligamentary structures.

SUMMARY OF BACKGROUND DATA

Despite decades of research, there is no generally accepted theory on the physical origin of the severe spinal deformations seen in AIS. The prevailing theories tend to focus on left-right asymmetry, rotational instability, or the sagittal spinal profile in idiopathic scoliosis.

METHODS

We test our hypothesis with a physical model of the spine that simulates growth, counteracted by ligaments and muscles, modeled by tethers and springs. Growth of the spine is further restrained by an anterior band representing the thorax, the linea alba, and abdominal musculature. We also explore literature in search of molecular mechanisms that may induce differential growth.

RESULTS

Differential growth in the restrained spine model first induces hypokyphosis and mild lateral bending of the thoracic spine, but then suddenly escalates into a scoliotic deformity, consistent with clinical observations of AIS. The band simulating the ventral structures of the body had a pivotal effect on sagittal curvature and the initiation of lateral bending and rotation. In literature, several molecular mechanisms were found that may explain the occurrence of differential growth between the spine and the musculo-ligamentary structures.

CONCLUSION

While AIS is a three-dimensional deformation of the spine, it appears that restrained differential growth in the sagittal plane can result in lateral bending and rotation without a pre-existing left-right asymmetry. This supports the concept that AIS may result from a growth imbalance rather than a local anatomical defect.

LEVEL OF EVIDENCE

N/A.

Mechanobiological modelling of tendons: Review and future opportunities

Tendons are adapted to carry large, repeated loads and are clinically important for the maintenance of musculoskeletal health in an increasing, actively ageing population, as well as in elite athletes. Tendons are known to adapt to mechanical loading. Also, their healing and disease processes are highly sensitive to mechanical load. Computational modelling approaches developed to capture this mechanobiological adaptation in tendons and other tissues have successfully addressed many important scientific and clinical issues. The aim of this review is to identify techniques and approaches that could be further developed to address tendon-related problems. Biomechanical models are identified that capture the multi-level aspects of tendon mechanics. Continuum whole tendon models, both phenomenological and microstructurally motivated, are important to estimate forces during locomotion activities. Fibril-level microstructural models are documented that can use these estimated forces to detail local mechanical parameters relevant to cell mechanotransduction. Cell-level models able to predict the response to such parameters are also described. A selection of updatable mechanobiological models is presented. These use mechanical signals, often continuum tissue level, along with rules for tissue change and have been applied successfully in many tissues to predict in vivo and in vitro outcomes. Signals may include scalars derived from the stress or strain tensors, or in poroelasticity also fluid velocity, while adaptation may be represented by changes to elastic modulus, permeability, fibril density or orientation. So far, only simple analytical approaches have been applied to tendon mechanobiology. With the development of sophisticated computational mechanobiological models in parallel with reporting more quantitative data from in vivo or clinical mechanobiological studies, for example, appropriate imaging, biochemical and histological data, this field offers huge potential for future development towards clinical applications.

Stochastic amplitude-modulated stretching of rabbit flexor digitorum profundus tendons reduces stiffness compared to cyclic loading but does not affect tenocyte metabolism

Background

It has been demonstrated that frequency modulation of loading influences cellular response and metabolism in 3D tissues such as cartilage, bone and intervertebral disc. However, the mechano-sensitivity of cells in linear tissues such as tendons or ligaments might be more sensitive to changes in strain amplitude than frequency. Here, we hypothesized that tenocytes in situ are mechano-responsive to random amplitude modulation of strain.

Methods

We compared stochastic amplitude-modulated versus sinusoidal cyclic stretching. Rabbit tendon were kept in tissue-culture medium for twelve days and were loaded for 1h/day for six of the total twelve culture days. The tendons were randomly subjected to one of three different loading regimes: i) stochastic (2 – 7% random strain amplitudes), ii) cyclic_RMS (2–4.42% strain) and iii) cyclic_high (2 - 7% strain), all at 1 Hz and for 3,600 cycles, and one unloaded control.

Results

At the end of the culture period, the stiffness of the “stochastic” group was significantly lower than that of the cyclic_RMS and cyclic_high groups (both, p < 0.0001). Gene expression of eleven anabolic, catabolic and inflammatory genes revealed no significant differences between the loading groups.

Conclusions

We conclude that, despite an equivalent metabolic response, stochastically stretched tendons suffer most likely from increased mechanical microdamage, relative to cyclically loaded ones, which is relevant for tendon regeneration therapies in clinical practice.

Effect of exercise on articular cartilage

This review primarily focuses on how the macromolecular composition and architecture of articular cartilage and its unique biomechanical properties play a pivotal role in the ability of articular cartilage to withstand mechanical loads several magnitudes higher than the weight of the individual. Current findings on short-term and long-term effects of exercise on human articular cartilage are reviewed, and the importance of appropriate exercises for individuals with normal and diseased or aberrated cartilage is discussed.

On muscle, tendon and high heels

Wearing high heels (HH) places the calf muscle-tendon unit (MTU) in a shortened position. As muscles and tendons are highly malleable tissues, chronic use of HH might induce structural and functional changes in the calf MTU. To test this hypothesis, 11 women regularly wearing HH and a control group of 9 women were recruited. Gastrocnemius medialis (GM) fascicle length, pennation angle and physiological cross-sectional area (PCSA), the Achilles' tendon (AT) length, cross-sectional area (CSA) and mechanical properties, and the plantarflexion torque-angle and torque-velocity relationships were assessed in both groups. Shorter GM fascicle lengths were observed in the HH group (49.6+/-5.7 mm vs 56.0+/-7.7 mm), resulting in greater tendon-to-fascicle length ratios. Also, because of greater AT CSA, AT stiffness was higher in the HH group (136.2+/-26.5 N mm(-1) vs 111.3+/-20.2 N mm(-1)). However, no differences in the GM PCSA to AT CSA ratio, torque-angle and torque-velocity relationships were found. We conclude that long-term use of high-heeled shoes induces shortening of the GM muscle fascicles and increases AT stiffness, reducing the ankle's active range of motion. Functionally, these two phenomena seem to counteract each other since no significant differences in static or dynamic torques were observed.

Simulation of biological growth

Researchers concerned with the growth of biological tissue often use models that predict the growth as a function of a mechanical stimulus such as stress, strain or elastic energy. However, a general theory for bulk growth should consider that the mechanical stimulus may only be one of many factors contributing to growth. Another important factor could be time, as living tissues can be assumed to have a pre-programmed directional biological growth that is independent of mechanical stimuli. This paper has two objectives: the first is to introduce the concept of directional biological growth within a well developed growth theory, the second is to present the computational methods by which three-dimensional growth that encompasses time and stress effects can be simulated using commercially available finite element analysis software.

A finite dissipative theory of temporary interfibrillar bridges in the extracellular matrix of ligaments and tendons

The structural integrity and the biomechanical characteristics of ligaments and tendons result from the interactions between collagenous and non-collagenous proteins (e.g. proteoglycans, PGs) in the extracellular matrix. In this paper, a dissipative theory of temporary interfibrillar bridges in the anisotropic network of collagen type I, embedded in a ground substance, is derived. The glycosaminoglycan chains of decorin are assumed to mediate interactions between fibrils, behaving as viscous structures that transmit deformations outside the collagen molecules. This approach takes into account the dissipative effects of the unfolding preceding fibrillar elongation, together with the slippage of entire fibrils and the strain-rate-dependent damage evolution of the interfibrillar bridges. Thermodynamic consistency is used to derive the constitutive equations, and the transition state theory is applied to model the rearranging properties of the interfibrillar bridges. The constitutive theory is applied to reproduce the hysteretic spectrum of the tissues, demonstrating how PGs determine damage evolution, softening and non-recoverable strains in their cyclic mechanical response. The theoretical predictions are compared with the experimental response of ligaments and tendons from referenced studies. The relevance of the proposed model in mechanobiology research is discussed, together with several applications from medical practice to bioengineering science.

A volumetric model for growth of arterial walls with arbitrary geometry and loads

Stress and deformation in arterial wall tissue are factors which may influence significantly its response and evolution. In this work we develop models based on nonlinear elasticity and finite element numerical solutions for the mechanical behaviour and the remodelling of the soft tissue of arteries, including anisotropy induced by the presence of collagen fibres. Remodelling and growth in particular constitute important features in order to interpret stenosis and atherosclerosis. The main object of this work is to model accurately volumetric growth, induced by fluid shear stress in the intima and local wall stress in arteries with patient-specific geometry and loads. The model is implemented in a nonlinear finite element setting which may be applied to realistic 3D geometries obtained from in vivo measurements. The capabilities of this method are demonstrated in several examples. Firstly a stenotic process on an idealised geometry induced by a non-uniform shear stress distribution is considered. Following the growth of a right coronary artery from an in vivo reconstructed geometry is presented. Finally, experimental measurements for growth under hypertension for rat carotid arteries are modelled.

An axisymmetric computational model of skin expansion and growth

Skin expansion is the principal technique used in plastic surgery to repair large cutaneous defects, typically after tumour removal, burn care, craniofacial surgery and post-mastectomy breast reconstruction. It allows a gain of new tissue by means of gradual expansion of a prosthesis, surgically implanted beneath the patient's skin. Nevertheless, wide clinical use is not supported by a deep quantitative knowledge of the phenomena occurring during the expansion. A finite element model of the skin expansion was developed to evaluate the stresses and the strains of the skin due to the expander inflation and validated by proper in vitro experiments; furthermore, a growth model based on the mechanical stimulus was implemented to estimate the skin area gain. The developed computational approach, composed of the skin expansion model interaction and the growth law, proved its validity to investigate skin expansion phenomena: its use suggests a new predictive tool to optimize clinical procedures and the expander devices' design.

Dependence of mechanical behavior of the murine tail disc on regional material properties: a parametric finite element study

In vivo rodent tail models are becoming more widely used for exploring the role of mechanical loading on the initiation and progression of intervertebral disc degeneration. Historically, finite element models (FEMs) have been useful for predicting disc mechanics in humans. However, differences in geometry and tissue properties may limit the predictive utility of these models for rodent discs. Clearly, models that are specific for rodent tail discs and accurately simulate the disc's transient mechanical behavior would serve as important tools for clarifying disc mechanics in these animal models. An FEM was developed based on the structure, geometry, and scale of the mouse tail disc. Importantly, two sources of time-dependent mechanical behavior were incorporated: viscoelasticity of the matrix, and fluid permeation. In addition, a novel strain-dependent swelling pressure was implemented through the introduction of a dilatational stress in nuclear elements. The model was then validated against data from quasi-static tension-compression and compressive creep experiments performed previously using mouse tail discs. Finally, sensitivity analyses were performed in which material parameters of each disc subregion were individually varied. During disc compression, matrix consolidation was observed to occur preferentially at the periphery of the nucleus pulposus. Sensitivity analyses revealed that disc mechanics was greatly influenced by changes in nucleus pulposus material properties, but rather insensitive to variations in any of the endplate properties. Moreover, three key features of the model-nuclear swelling pressure, lamellar collagen viscoelasticity, and interstitial fluid permeation-were found to be critical for accurate simulation of disc mechanics. In particular, collagen viscoelasticity dominated the transient behavior of the disc during the initial 2200 s of creep loading, while fluid permeation governed disc deformation thereafter. The FEM developed in this study exhibited excellent agreement with transient creep behavior of intact mouse tail motion segments. Notably, the model was able to produce spatial variations in nucleus pulposus matrix consolidation that are consistent with previous observations in nuclear cell morphology made in mouse discs using confocal microscopy. Results of this study emphasize the need for including nucleus swelling pressure, collagen viscoelasticity, and fluid permeation when simulating transient changes in matrix and fluid stress/strain. Sensitivity analyses suggest that further characterization of nucleus pulposus material properties should be pursued, due to its significance in steady-state and transient disc mechanical response.

Relationships between tissue dilatation and differentiation in distraction osteogenesis

Mechanical factors modulate the morphogenesis and regeneration of mesenchymally derived tissues via processes mediated by the extracellular matrix (ECM). In distraction osteogenesis, large volumes of new bone are created through discrete applications of tensile displacement across an osteotomy gap. Although many studies have characterized the matrix, cellular and molecular biology of distraction osteogenesis, little is known about relationships between these biological phenomena and the local physical cues generated by distraction. Accordingly, the goal of this study was to characterize the local physical environment created within the osteotomy gap during long bone distraction osteogenesis. Using a computational approach, we quantified spatial and temporal profiles of three previously identified mechanical stimuli for tissue differentiation-pressure, tensile strain and fluid flow-as well as another candidate stimulus-tissue dilatation (volumetric strain). Whereas pressure and fluid velocity throughout the regenerate decayed to less than 31% of initial values within 20 min following distraction, tissue dilatation increased with time, reaching steady state values as high as 43% strain. This dilatation created large reductions and large gradients in cell and ECM densities. When combined with previous findings regarding the effects of strain and of cell and ECM densities on cell migration, proliferation and differentiation, these results indicate two mechanisms by which tissue dilatation may be a key stimulus for bone regeneration: (1) stretching of cells and (2) altering cell and ECM densities. These results are used to suggest experiments that can provide a more mechanistic understanding of the role of tissue dilatation in bone regeneration.

A computational model for the adaptation of muscle and tendon length to average muscle length and minimum tendon strain

This paper hypothesizes that average muscle length and minimum tendon strain govern muscle and tendon length adaptation in all situations. A model has been implemented to test this hypothesis, and simulations have been performed for normal development, bone lengthening, immobilization, and retinacular release experiments in young and adult animals. The simulation results predict that both muscle and tendon lengthen during normal development, with the rate of tendon growth slowing faster than the rate of muscle growth. The results also predict that muscle length increases during bone lengthening in both young and adult animals, while tendon length increases only in young animals. For immobilization in adult animals, the results predict that muscle length increases when the muscle is immobilized in a lengthened position and decreases when the muscle is immobilized in a shortened position with no change in tendon length. For immobilization in young animals, the results predict reduced muscle growth and increased tendon growth regardless of immobilization position. Finally, the simulations predict that retinacular release which increases excursion of the musculotendinous unit leads to increased muscle length with decreased tendon length in young animals and decreased muscle length with no change in tendon length in adult animals. These simulation results are consistent with experimental findings reported in the literature by other investigators. This suggests that average muscle length and minimum tendon strain may represent general principles that govern muscle and tendon length adaptation.

Regulation of heat shock protein 47 and type I procollagen expression in avian tendon cells

Heat shock protein 47 (Hsp47) is a collagen-binding stress protein that acts as a collagen-specific molecular chaperone during the biosynthesis and secretion of procollagen. Type I collagen is a major component of tendons. Coexpression of genes for both proteins has been reported in various tissues, where many growth factors likely regulate their expressions in different ways. Here we describe the effects of increased temperature, mechanical stress and growth factors on Hsp47 and type I procollagen expression in embryonic chicken tendon cells. The expression of Hsp47 mRNA at 45 degrees C increased within 60 min and returned to baseline in 4 h after the temperature decreased to 37 degrees C. Our data also show that transforming growth factor beta1 (TGF-beta1) is another regulator of Hsp47 expression as the addition of TGF-beta1 led to a moderate increase in the expression of Hsp47 mRNA. TGF-beta2 and TGF-beta3 exerted only a small effect; epidermal growth factor and tumor necrosis factor alpha (TNF-alpha) had none. TGF-beta1 increased type I procollagen mRNA expression and TNF-alpha reduced this expression. TGF-beta1 delayed the degradation of Hsp47 mRNA after heat shock likely via post-transcriptional regulation of the Hsp47 gene. We also report that mechanical stress increased Hsp47 mRNA expression and Hsp47 protein synthesis. Induction of Hsp47 protein expression by heat shock, mechanical stress and TGF-beta1 was likely achieved through activation and translocation of heat shock transcription factor 1 into the nucleus. Our data indicate that TGF-beta1 is a major regulator of both procollagen and Hsp47 genes.

Why mechanobiology? A survey article

The central paradigm of skeletal mechanobiology is that mechanical forces modulate morphological and structural fitness of the skeletal tissues-bone, cartilage, ligament and tendon. Traditionally, skeletal biomechanics has focussed on how these tissues perform the structural and locomotory functions of the vertebrate skeleton. In mechanobiology the central question is how these same load-bearing tissues are produced, maintained and adapted by cells as an active response to biophysical stimuli in their environment. The idea that 'form follows function' is not new, but we now believe that the scientific community has the knowledge and tools to prove, understand and use functional adaptation to benefit medicine and human health. In this Survey Article the philosophy and progress of skeletal mechanobiology are discussed. The revival of this science, with roots dating back to the 19th Century, is now driven by new developments in cellular, molecular and computational technologies. These developments are still in an early stage of application, but if modern mechanobiology fulfills the promises of its ambitions, the results will bring great benefits to tissue engineering and to the treatment and prevention of skeletal conditions such as congenital deformities, osteoporosis, osteoarthritis and bone fractures.

Tissue adaptation to physical stress: a proposed "Physical Stress Theory" to guide physical therapist practice, education, and research

The purpose of this perspective is to present a general theory--the Physical Stress Theory (PST). The basic premise of the PST is that changes in the relative level of physical stress cause a predictable adaptive response in all biological tissue. Specific thresholds define the upper and lower stress levels for each characteristic tissue response. Qualitatively, the 5 tissue responses to physical stress are decreased stress tolerance (eg, atrophy), maintenance, increased stress tolerance (eg, hypertrophy), injury, and death. Fundamental principles of tissue adaptation to physical stress are described that, in the authors' opinion, can be used to help guide physical therapy practice, education, and research. The description of fundamental principles is followed by a review of selected literature describing adaptation to physical stress for each of the 4 main organ systems described in the Guide to Physical Therapist Practice (ie, cardiovascular/pulmonary, integumentary, musculoskeletal, neuromuscular). Limitations and implications of the PST for practice, research, and education are presented.

Fatigue damage of human tendons

The study was designed to examine the effects of partial fatigue on specific mechanical parameters which characterise human tendons in vitro. Specimens prepared from 12 intact Extensor digitorum longus tendons of the foot were subjected to partial fatigue, equivalent to 25% of the median fatigue life, by a cyclic square tension-tension stress waveform at the physiological frequency of 4 Hz. The maximum stress was set at a value corresponding to 20% of the calculated ultimate tensile strength (UTS) of 100 MPa. The minimum stress was set at 1% of the UTS. Dynamic characterisation was performed at stress levels of 10% and 20% of the UTS prior to and following partial mechanical fatigue. Subsequent quasi-static tests were performed on some of the specimens. Comparative analysis of the damage ratios (DRs) of quasi-static and dynamic mechanical parameters suggested the use of the DR for dynamic tensile modulus as a good indicator of damage inflicted by mechanical fatigue. Such an approach might be used for an in vivo assessment of tendon damage.

Changes in ADC caused by tensile loading of rabbit achilles tendon: evidence for water transport

Water diffusion measurements were performed on rabbit Achilles tendons during static tensile loading and tendons in an unloaded state. The apparent diffusion coefficient (ADC) was measured along two directions: parallel and perpendicular to the long axis of the tendon. Tendons were studied after being prepared in two ways: (a) after being stored frozen in phosphate-buffered saline (PBS) and (b) freshly isolated. Statistically significant directional anisotropy was observed in the ADC in all tendons. The ADC was significantly greater in the direction parallel to the long axis of the tendon than in the perpendicular direction. The anisotropy is attributed to the greater restrictions seen by the water molecules in the perpendicular direction and is consistent with the known geometry of the tendon. Storage in PBS caused tendons to swell. This increased the ADC measured along both directions and reduced the anisotropy. The existence of anisotropy in the ADC was not related to the orientation of the specimen in the magnet. The ADC increased along both directions following the application of a 5-N tensile load; the increase was greatest along the perpendicular axis of the tendon. In order to determine whether load-related changes in the ADC reflected changes in interfibrilar spacing, we used electron microscopy to measure load-related changes in fibril spacing. Load-related changes in fiber spacing could not account for the observed changes in the ADC. The increase in ADC caused by loading was attributed to the extrusion of tendon water into a bulk phase along the outside surface of the tendon. In PBS-stored samples, enough fluid was extruded that it could be visualized. The transient response of the ADC to a 5-N tensile load was also studied. The absolute ADC in both directions increased with loading and recovered to baseline upon unloading. The transient changes in ADC, for both loading and unloading, had a mean time constant of approximately 15 min. The magnitude of the load-induced transient ADC changes was comparable to that seen in the static-loading experiments.

Viscoelastic finite-element analysis of a lumbar motion segment in combined compression and sagittal flexion. Effect of loading rate

STUDY DESIGN

A study using a validated viscoelastic finite-element model of a L2-L3 motion segment to identify the load sharing among the passive elements at different loading rates.

OBJECTIVE

To enhance understanding concerning the role of the loading rate (i.e., speed of lifting and lowering during manual material handling tasks) on the load sharing and safety margin of spinal structures.

SUMMARY OF BACKGROUND DATA

Industrial epidemiologic studies have shown that jobs requiring a higher speed of trunk motion contribute to a higher risk of industrial low back disorders. Consideration of the dynamic loading characteristics, such as lifting at different speeds, requires modeling of the viscoelastic behavior of passive tissues. Detailed systematic analysis of loading rate effects has been lacking in the literature.

METHODS

Complex flexion movement was simulated by applying compression and shear loads at the top of the upper vertebra while its sagittal flexion angle was prescribed without constraining any translations. The lower vertebra was fixed at the bottom. The load reached its maximum values of 2000 N compression and 200 N anterior shear while L2 was flexed to 10 degrees of flexion in the three different durations of 0.3, 1, and 3 seconds to represent fast, medium, and slow movements, respectively. The resisted bending moment, gross load-displacement response of the motion segment, forces in facet joints and ligaments, stresses and strains in anulus fibrosus, and intradiscal pressure were compared across different rates.

RESULTS

The distribution of stress and strain was markedly affected by the loading rate. The higher loading rate increased the peak intradiscal pressure (12.4%), bending moment (20.7%), total ligament forces (11.4%), posterior longitudinal ligament stress (15.7%), and anulus fiber stress at the posterolateral innermost region (17.9%), despite the 15.4% reduction in their strain.

CONCLUSIONS

Consideration of the time-dependent material properties of passive elements is essential to improving understanding of motion segment responses to dynamic loading conditions. Higher loading rate markedly reduces the safety margin of passive spinal elements. When the dynamic tolerance limits of tissues are available, the results provide bases for the guidelines of safe dynamic activities in clinics or industry.

Patellar tendon augmentation after removal of its central third limits joints tissue changes

The central third of the patellar tendon is commonly used to reconstruct the injured anterior cruciate ligament. Some studies have noted changes in joint tissues following this procedure. It has been postulated that these changes may be associated with increased stress on the remaining tendon following harvest of the graft. In our study, the central third of the patellar tendon was excised in three groups of rabbits. The central tendon defects in two of the three groups were fitted with different augmentation devices to augment the host tendon during the healing process. All rabbits followed a daily treadmill exercise regimen for 12 weeks following the operation. Biomechanical testing of the tendon revealed that in nonaugmented tendons the cross-sectional area and the length of the patellar tendon significantly increased 112 and 16%, respectively. There was histological evidence of host-tendon remodeling throughout the cross section and extensive fibrosis in the infrapatellar fat pad. Augmentation of the tendon significantly reduced these changes, with the least change noted in the group with the greatest augmentation. The rabbits with augmentation devices retained tendon dimensions similar to those of the contralateral intact tendon, and tendon remodeling occurred only in the defect area. The rabbits with augmentation devices exhibited little to no fibrosis of the fat pad. Structural properties of augmented and nonaugmented tendons were similar despite the size differences, indicating higher tissue quality in the augmented tendons. This study suggested that complications of the knee joint (i.e., tendon proliferation and fat pad fibrosis) noted after anterior cruciate-ligament reconstruction with the autogenous patellar tendon may be limited by the implantation of an augmentation device.