Stationary phases for capillary electrochromatography

A novel C18 reversed phase organic–silica hybrid cationic monolithic capillary column with an ionic liquid as an organic monomer via a “one-pot” approach for capillary electrochromatography

A novel IL hybrid monolithic column with great potential in separation has been fabricated via a “one-pot” approach for capillary electrochromatography

A facile versatile polymeric monolith for multiple separations

A hydrophilic versatile polymeric monolith with multiple retention mechanisms including hydrogen-bonding, π-π and electrostatic interactions, was developed by a simple one-step in situ polymerization. High mechanical stability and excellent separation capabilities of various nonpolar and polar analytes were successfully achieved and employed for multiple separations in mixed-mode chromatography.

Porous membrane structures as stationary phase for capillary electrochromatography

This work presents the application of membrane technology for the fabrication of stationary phase for CEC columns using the technique based on phase inversion of polymer solution. A blend of polyimide P84 and sulphonated poly(ether ether ketone was processed via immersion precipitation dry-wet spinning into small-bore porous fiber. The morphology, zeta potential, and performance of the porous structure in the CEC separation were investigated. Noncharged molecules (as markers of the electroosmotic flow) and small organic compounds were injected into the column, driven under the application of voltage, and detected on the electropherogram. The proof of concept of applying porous membrane structure as stationary phase for CEC was shown and possible optimization to improve efficiency and selectivity was suggested.

Mixed ligand monolithic columns for reversed-phase capillary electrochromatography via hydrophobic and π interactions

Novel mixed ligand monoliths (MLM) for capillary electrochromatography (CEC) of a wide range of solutes differing in both polarity and size were introduced. The MLM capillary columns were based on the different compositions of octadecyl acrylate (ODA) and 2-naphthyl methacrylate (NAPM) monomers in the presence of trimethylolpropane trimethacrylate (TRIM) crosslinker and a ternary porogenic solvent made up of cyclohexanol, ethylene glycol, and water. As expected, the magnitude of the electroosmotic flow (EOF) changed with the composition of the MLM. As the percent of the monomer ODA in the polymerization mixture was increased, the EOF increased to a maximum at 50-mol% ODA and then leveled off at 75-mol% and 100-mol% ODA, an indication that the ODA ligand in general exhibited a higher binding for the mobile-phase ions than the NAPM ligand. This is due to the fact that the ODA is an acrylate-based monomer, whereas the NAPM is a methacrylate-based monomer. While ODA provided solely nonpolar interactions, NAPM exhibited both nonpolar and π interactions with certain solutes. It was found out that columns with a given composition of both ligands yielded a unique selectivity for a given set of solutes that was not matched by columns made by either ODA or NAPM alone. Several test mixtures were used in the evaluation of the MLM columns including polycyclic aromatic hydrocarbons, alkyl phenyl ketones, nitroalkanes, alkylbenzenes, toluene derivatives, peptides, and proteins. Peptide mapping of the tryptic digest of the standard lysozyme protein was also studied.

Separation of basic and acidic compounds by capillary electrochromatography using monolithic silica capillary columns with zwitterionic stationary phase

A novel monolithic silica column with zwitterionic stationary phase was prepared by in-situ covalent attachment of phenylalanine to a 3-glycidoxypropyltriethoxysilane-modified silica monolith. Due to the zwitterionic nature of the resulting stationary phase, the density and sign of the net surface charge, and accordingly the direction and magnitude of electroosmotic flow in this column during capillary electrochromatography could be manipulated by adjusting the pH values of the mobile phase. CEC separations of various acidic and basic compounds were performed on the prepared column in anodic and weakly cathodic EOF modes, respectively. The peak tailing of basic compounds in CEC on a silica column could be alleviated at optimized buffer compositions. Besides the electrophoretic mechanism and weak hydrophobic interaction, weak cation- and anion-exchange interactions are also involved in the separations of acids and bases, respectively, on the zwitterionic column.

Hybrid silica monolithic column for capillary electrochromatography with enhanced cathodic electroosmotic flow

A hybrid silica monolithic stationary phase for RP CEC was prepared by in situ co-condensation of (3-mercaptopropyl)-trimethoxysilane (MPTMS), phenyltriethoxysilane (PTES), and tetraethoxysilane (TEOS) via a sol-gel process. The thiol groups on the surface of the stationary phase were oxidized to sulfonic acids by peroxytrifluoroacetic acid. The introduced sulfonic acid moieties on the monoliths were characterized by a strong and relatively stable EOF in a broad pH range from 2.35 to 7.0 in CEC. Aromatic acids and neutral compounds can be simultaneously separated in this column under cathodic EOF. The CEC column exhibited a typical RP chromatographic mechanism for neutral compounds due to the introduced phenyl groups.

Open tubular capillary electrochromatography using capillaries coated with films of alkanethiol-self-assembled gold nanoparticle layers

We have used alkanethiol self-assembly and dithiol layer-by-layer (LBL) self-assembly processes to prepare an Au nanoparticle (NP)-coated open tubular capillary electrochromatography (OTCEC) column for the separation of three neutral steroid drugs (testosterone, progesterone, and testosterone propionate). The CEC column was fabricated through LBL self-assembly of Au NPs on a 3-aminopropyltrimethoxysilane (APTMS)-modified fused-silica capillary and subsequent surface functionalization of the Au NPs through self-assembly of alkanethiols. We investigated the electrochromatographic properties of the resulting Au NP-coated CEC column using a "reversed phase" test mixture of three steroid drugs. We found that the key factors affecting the separation performance were the number of Au NP layers, the length of the carbon-atom chain of the alkanethiol self-assembled on the Au NPs, the percentage of organic modifier, and the pH of the running electrolyte. This study reveals that the self-assembly of alkanethiols and dithiols onto Au NPs provides stationary phases for CEC separation that are easy to prepare and whose retention behavior is highly controllable and reproducible. We believe that our findings will contribute to further studies of the application of nanotechnology to separation science.

Recent developments in the field of monolithic stationary phases for capillary electrochromatography

This review summarizes the contributions to the rapidly growing area of monolithic columns based on both silica and synthetic polymers for capillary electrochromatography and chip electrochromatography, with a focus on those published during the year 2004. A wide variety of both modified approaches to the "old" monoliths and new monoliths have been reported despite the very short period of time covered. This demonstrates that monolithic stationary phases have become a well-established format in the field of electrochromatography. The simplicity of their preparation as well as the good control over their porous properties and surface chemistries make the monolithic separation media an attractive alternative to capillary columns packed with particulate materials.

Capillary electrochromatography column behavior of butyl and lauryl acrylate porous polymer monoliths

A variety of porous polymer monoliths (PPMs) have been synthesized using the 'conduct-as-cast' format. The resulting polymers have been evaluated for use as separation media in capillary electrochromatography (CEC). The results have shown that substituting a small percentage of the standard polymer formulation with a more hydrophobic monomer produced columns with expected increases in retention for a neutral analyte series. However, substituting larger percentages of a more hydrophobic monomer resulted in columns that exhibited less retention. The unexpected behavior of these hydrophobic columns has been attributed to the non-uniform polymeization of the moree hydrophobic monoliths. Van Deemter plots of polyaromatic hydrocarbons have been examined to further analyze the unexpected behavior of these columns. Hmin values ranged from 8.7 to 9.1 microm for the columns evaluated. The effect of the percentage of organic modfier in the phase on the separation has also been studied. The retention window decreases when altering the ACN concentration in the mobile phase from 50% to 80% (v/v).

Retention behaviour of peptides in capillary electrochromatography using an embedded ammonium in dodecacyl stationary phase

The potential of a silica stationary phase bearing an embedded cationic quaternary amine in dodecacyl chain, to separate peptides by capillary electrochromatography (CEC) has been evaluated. The ability of this stationary phase, to generate a consistent anodic electroosmotic flow was first evaluated. This flow was found to be independent of pH over a wide range (2-12), of the acetonitrile percentage in the electrolyte. The stability of the stationary phase evaluated through the electroosmotic flow variations was demonstrated at extreme pH values (2.5 and 9.1). A careful examination of the influence of mobile phase conditions (acetonitrile percentage, salt concentration and nature of buffer) on the electrochromatographic retention and electrophoretic migration behaviour of different standard peptides was carried out. In acidic conditions, the electrokinetic contribution appears to be predominant compared to the chromatographic one. Several types of chromatographic interactions, reversed-phase partitioning and anion exchange, were involved in the CEC of peptides, whereas repulsive electrostatic interaction could be considered as negligible. This stationary phase affords different selectivity compared to that observed on a C18 stationary phase. Finally, the method was applied to the peptide mapping of beta-lactoglobulin and human growth hormone under unpressurized and isocratic elution.

Sol–gel stationary phases for capillary electrochromatography

A review is presented on the current state of the art and future trends in the development of sol-gel stationary phases for capillary electrochromatography (CEC). The design and synthesis of stationary phases with prescribed chromatographic and surface charge properties represent challenging tasks in contemporary CEC research. Further developments in CEC as a high-efficiency liquid-phase separation technique will greatly depend on new breakthroughs in the area of stationary phase development. The requirements imposed on CEC stationary phase performance are significantly more demanding compared with those for HPLC. The design of CEC stationary phase must take into consideration the structural characteristics that will provide not only the selective solute/stationary phase interactions leading to chromatographic separations but also the surface charge properties that determine the magnitude and direction of the electroosmotic flow responsible for the mobile phase movement through the CEC column. Therefore, the stationary phase technology in CEC presents a more complex problem than in conventional chromatographic techniques. Different approaches to stationary phase development have been reported in contemporary CEC literature. The sol-gel approach represents a promising direction in this important research. It is applicable to the preparation of CEC stationary phases in different formats: surface coatings, micro/submicro particles, and monolithic beds. Besides, in the sol-gel approach, appropriate sol-gel precursors and other building blocks can be selected to create a stationary phase with desired structural and surface properties. One remarkable advantage of the sol-gel approach is the mild thermal conditions under which the stationary phase synthesis can be carried out (typically at room temperature). It also provides an effective pathway to integrating the advantageous properties of organic and inorganic material systems, and thereby enhancing and fine-tuning chromatographic selectivity of the created hybrid organic-inorganic stationary phases. This review focuses on recent developments in the design, synthesis, characterization, properties, and applications of sol-gel stationary phases in CEC.

Preparation and HPLC applications of rigid macroporous organic polymer monoliths

Rigid porous polymer monoliths are a new class of materials that emerged in the early 1990s. These monolithic materials are typically prepared using a simple molding process carried out within the confines of a closed mold. For example, polymerization of a mixture comprising monomers, free-radical initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. The versatility of the preparation technique is demonstrated by its use with hydrophobic, hydrophilic, ionizable, and zwitterionic monomers. Several system variables can be used to control the porous properties of the monolith over a broad range and to mediate the hydrodynamic properties of the monolithic devices. A variety of methods such as direct copolymerization of functional monomers, chemical modification of reactive groups, and grafting of pore surface with selected polymer chains is available for the control of surface chemistry. Since all the mobile phase must flow through the monolith, the convection considerably accelerates mass transport within the molded material, and the monolithic devices perform well, even at very high flow rates. The applications of polymeric monolithic materials are demonstrated mostly on the separations in the HPLC mode, although CEC, gas chromatography, enzyme immobilization, molecular recognition, advanced detection systems, and microfluidic devices are also mentioned.

Monolithic Column with Zwitterionic Stationary Phase for Capillary Electrochromatography

A capillary electrochromatography (CEC) monolithic column with zwitterionic stationary phases was prepared by in situ polymerization of butyl methacrylate, ethylene dimethacrylate, methacrylic acid, and 2-(dimethyl amino) ethyl methacrylate in the presence of porogens. The stationary phases have zwitterionic functional groups, that is, both tertiary amine and acrylic acid groups, so the ionization of those groups on the zwitterionic stationary phase was affected by the pH values of the mobile phase, and further affects the strength and direction of the electroosmotic flow (EOF). Separations of alkylbenzenes and polycyclic aromatic hydrocarbons based on the hydrophobic mechanism were obtained. Separation of various types of polar compounds, including phenols, anilines, and peptides, on the prepared column were performed under CEC mode with anodic and cathodic EOF, and different separation selectivities of those polar analytes were observed on the monolithic capillary column by using mobile phases with different pH values.

Open Tubular Capillary Electrochromatography of Synthetic Peptides on Etched Chemically Modified Columns

Two sets of peptides, each having structurally similar amino acid sequences, have been investigated by capillary electrochromatography (CEC) using etched chemically modified capillaries as the separation medium. In comparison to gradient RP-HPLC, the resolving power of the described CEC methods has been found to be superior. A number of variables have been examined with respect to optimization of the separation of these closely related peptides with several different etched chemically modified capillaries. These experimental variables included the nature of the bonded moiety, the pH, the organic modifier type, and the amount of organic modifier in the buffer electrolyte. Systematic variation of these parameters results in significant changes in the migrational behavior of the investigated peptides and provides important insight into the underlying molecular separation processes that prevail in open tubular CEC. Moreover, under optimized conditions, efficient separations characterized by highly symmetrical peaks were achieved. In addition, this study has permitted the long-term stability as well as the short-term and long-term reproducibility of the etched chemically modified capillaries to be documented.

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.

On the nature of the forces controlling selectivity in the high performance capillary electrochromatographic separation of peptides

In this minireview, the nature of the forces controlling selectivity in the high performance capillary electrochromatographic (HP-CEC) separation of peptides has been examined. For uncharged and charged peptides, a synergistic interplay occurs in HP-CEC systems between adsorptive/partitioning events and electrokinetically driven motion. Moreover, at high field strengths, both bulk electrophoretic migration and surface electrodiffusion occur. Thus, the migration behavior of peptides in different HP-CEC systems can be rationalized in terms of the combined consequences of these various processes. Moreover, in HP-CEC, the buffer electrolyte interacts with both the peptide analytes and the sorbent as bulk phenomena. These buffer-mediated processes control the solvational characteristics, ionization status and conformational behavior of the peptides as well as regulate the double-layer properties of the sorbent, and the ion flux and electro-osmotic flow characteristics of the HP-CEC system per se. These buffer electrolyte effects mediate mutual interactions between the peptide and the sorbent, irrespective of whether the interaction occurs at the surface of microparticles packed into a capillary, at the surface of a contiguous monolithic structure formed or inserted within the capillary or at the walls of the capillary as is the case with open tubular HP-CEC. Diverse molecular and submolecular forces thus coalesce to provide the basis for the different experimental modes under which HP-CEC can be carried out. As a consequence of this interplay, experimental parameters governing the separation of peptides in HP-CEC can be varied over a wide range of conditions, ensuring numerous options for enhanced selectivity, speed, and resolution of peptides. The focus of the peptide separation examples presented in this minireview has been deliberately restricted to the use of HP-CEC capillaries packed with n-alkyl-bonded silicas or mixed-mode strong ion exchange sorbents, although other types of sorbent chemistries can be employed. From these examples, several conclusions have been drawn related to the use of HP-CEC in the peptide sciences. These observations confirm that variation of a specific parameter, such as the pH or the content of the organic solvent modifier in the buffer electrolyte, simultaneously influences all other physicochemical aspects of the specific HP-CEC separation. Peptide selectivity in HP-CEC thus cannot be fine-tuned solely through the use of single parameter optimization methods. In this context, HP-CEC differs significantly from the analogous reverse phase high performance liquid chromatography (RP-HPLC) procedures with peptides. Rather, more sophisticated multiparameter optimization procedures, involving knowledge of (a) the field strength polarity, (b) its contour and flux characteristics, (c) effects of buffer electrolyte composition and pH, (e) the influence of the temperature, and (f) the impact of the sorbent characteristics, are required if the full capabilities offered by HP-CEC procedures are to be exploited. In this minireview, the HP-CEC migration behavior of several different sets of synthetic peptides has been examined, and general guidelines elaborated from these fundamental considerations to facilitate the interpretation and modulation of peptide selectivity in HP-CEC.

Butyl acrylate porous polymer monoliths in fused-silica capillaries for use in capillary electrochromatography

Capillary electrochromatography incorporates features of both capillary electrophoresis and liquid chromatography. Butyl acrylate polymers, cast in-situ with heat initiated polymerization and no retaining frits have been made. Van Deemter plots of chrysene have been examined at a variety of operating temperatures to examine column behavior. Hmin moves to faster flow-rates and increases slightly in magnitude as temperature is increased. The longevity and reproducibility of the columns have been examined with a homologous series. Performance is very reproducible between two different columns of different diameters, operated on different systems and prepared from the same polymeriation batch. The relative standard deviation of retention factors is a maximum of 3.1% with most values calculated at less than 1%. The uniformity of the polymers as a function of length has also been studied with a series of polycyclic aromatic hydrocarbons, and the columns have proved to be very uniform across their length as measured by the consistency of retention factors with a maximum relative standard deviation of 3.4% and most values calculated between 1 and 2%. Plate numbers of between 65000 and 80000 plates/m have been attained for compounds with retention factors of 3 to 12. These columns have proved easy to make, are quite reproducible, and long lived.

Multimodal open-tubular capillary electrochromatographic analysis of amines and peptides

This study describes a comparison of different modes of open-tubular electrochromatography (OTCEC) in bare and etched capillaries. To carry out the investigation, the separation of impurities of two synthetic peptides and the separation of a mixture of five heterocyclic aromatic amines were studied. Three different types of stationary phase were evaluated: (i) fluorosurfactants (anionic and zwitterionic) adsorbed in the inner wall of the capillary (electrochromatography with dynamically modified stationary phases (DMS)CEC); (ii) physically adsorbed polymers (DMA-SO(3-) and DMA-N(+)(CH(3))(3)) and (iii) chemically modified capillaries (C(18), cholesteryl 10-undecanoate and diol). The results confirm that electrochromatography can be a viable alternative to capillary electrophoresis (CE) and liquid chromatography, more established separation techniques. It is possible to differentiate some minor species for the synthetic peptides that cannot be resolved by CE or high-performance liquid chromatography (HPLC). Moreover the separation of the amine mixture depends strongly on the stationary phase used.

Performance of metal complex substituted polysiloxanes in capillary electrophoresis and capillary electrochromatography

Two novel polysiloxanes containing the metal complex, Co(TACN)(3+)2 (TACN= 1,4,7-triazacyclononane) were used as coatings for capillary electrophoresis (CE) and capillary electrochromatography (CEC). Through crosslinking and covalent bonding, the positively charged polymers were bonded to silica supports. In both CE and CEC, these coatings exhibited strong, pH-independent, and anodic electroosmotic flow (EOF), and had excellent long-term stability. Successful separations of aromatic acids were achieved in CE. In CEC, separation of alkylbenzenes (7 min) and basic compounds (20 min) was achieved with higher resolving power than conventional octadecyl silica packings. These polymers represent a new class of coatings for CE and CEC that generate pH-independent EOF.

Capillary electrochromatography: a rapidly emerging separation method

This overview concerns the new chromatographic method--capillary electrochromatography (CEC)--that is recently receiving remarkable attention. The principles of this method based on a combination of electroosmotic flow and analyte-stationary phase interactions, CEC instrumentation, capillary column technology, separation conditions, and examples of a variety of applications are discussed in detail.

Surface-alkylated polystyrene monolithic columns for peptide analysis in capillary liquid chromatography-electrospray ionization mass spectrometry

Macroporous poly(styrene-divinylbenzene) (PS-DVB) monoliths were prepared by in situ polymerization in PEEK, fused silica, or stainless steel tubing having an inner diameter of 75 or 125 microm. A process is described for subsequent alkylation of the flow-contacting surfaces of the monoliths. The process treats all the surfaces including through-pore surfaces of the rigid macroporous monolith with a solution containing a dissolved Friedel-Crafts catalyst, an alkyl halide (1-chlorooctadecane), and an organic solvent. This process produces an improved reversed-phase liquid chromatographic separation of peptides compared to an unmodified monolithic PS-DVB column. The surface octadecylation is not necessary for a reversed-phase separation of proteins since both unmodified and modified columns provide comparable results. Tryptic protein digests, standard proteins, and standard peptides were used to evaluate the monolithic columns by employing electrospray mass spectrometry detection. Potential applications in proteomics studies by mass spectrometry, which use the alkylated monolithic column engaged onto the nanofabricated electrospray ionization chip, are also discussed.

Metal complex-substituted polysiloxanes as novel coatings for capillary electrophoresis and capillary electrochromatography

Two novel polysiloxane-based polymers, which contain metal complexes, have been prepared. To prepare the Co(TACN)3+(2) (TACN= 1,4,7-triazacyclononane) based polymers, an orthoamide derivative of TACN was added to bromobutane-substituted methylpolysiloxane and hydrolyzed with base. Co(II) was then coordinated to the TACN, followed by cobalt oxidation to make polymer A or followed by N-octyl TACN coordination and cobalt oxidation to make polymer B. In both materials, TACN forms thermodynamically and kinetically stable Co(TACN)3+(2) complexes in which the six coordination sites of the Co(III) are occupied by nitrogens from the TACN. The polymers were coated on fused-silica capillary columns and spherical silica particles, which were used for capillary electrophoresis and capillary electrochromatography, respectively. The open and packed columns showed strong and pH-independent reversed electroosmotic flow.

In situ time-resolved fluorescence spectroscopy in the frequency domain in capillary electrochromatography

In situ time-resolved fluorescence spectroscopy for capillary electrochromatography (CEC) is described in the frequency domain. Fluorescence decay of the solute molecules is collected directly in the packed stationary phase of the CEC capillary. The fluorescence lifetime profile of the solute molecules reveals the microenvironments they experience in the C18 chromatographic interface. A quartz flow cell and experimental optimization of the signal-to-noise ratio are described that enable the collection of high-quality decay data and subsequent calculation of fluorescence lifetime profiles of the solute molecules. The distribution of pyrene (PY), 1-pyrenemethanol (PY-MeOH), and 1-pyrenebutanol (PY-BuOH) into the C18 stationary phase and the solute-C18 phase interactions are probed, under separation conditions for CEC. All three molecules display a Gaussian distribution of lifetimes, consistent with an ensemble of heterogeneous microenvironments in the C18 stationary phase. The least polar molecule PY diffuses deeply into and interacts extensively with the C18 phase, experiencing high hydrophobicity and significant heterogeneity of microenvironments. The retention order of PY-MeOH, PY-BuOH, and PY in CEC is determined by their interactions with the stationary phase, revealed by their fluorescence lifetime distributions.

Capillary electrochromatography of peptides on microfabricated poly(dimethylsiloxane) chips modified by cerium(IV)-catalyzed polymerization

Vinylsulfonic acid, acrylic acid, 2-acrylamido-2-methylpropanesulfonic acid (AMPS), 4-styrenesulfonic acid, and stearyl methacrylate were used for successful modification of the surface of poly(dimethylsiloxane) (PDMS) by cerium(IV) catalyzed polymerization on microfabricated collocated monolith support structures microchips. Reproducible and stable coatings were obtained allowing highly efficient separations of a peptide mixture with RSD for retention times below 2.6%. AMPS-coated PDMS channels were shown to give a reproducible separation of a synthetic peptide mixture for over a month. Subsequent modification of microchip channels by AMPS and methoxydimethyloctadecylsilane allowed selective separation of complex bovine serum albumin digest with high reproducibility, and efficiency of about 620,000 plates/m.

Histidine-functionalized silica and its copper complex as stationary phases for capillary electrochromatography

A histidine-functionalized silica was prepared by covalent bonding of the functional groups to silane-treated silica gel. Conversion of functional groups was confirmed by infrared (IR) spectra, elemental analysis, and potentiometry. The functionality of the silica gel is 0.293 mmol g(-1). The coordination behavior of the histidine-functionalized silica was investigated by metal capacity and electron paramagnetic resonance (EPR). EPR measurements at different copper loadings were made. The results showed that the copper histidine complex might be distorted tetragonal. Both histidine-functionalized silica and its copper complex were employed as stationary phases for packed capillary electrochromatography (CEC). Electrical current was found helpful for evaluating the properties of frit construction and the stationary phase packing. Test samples include neutral compounds, inorganic anions and organic anions. Factors influencing the separation behavior have been studied. With copper-histidine functionalized silica under the condition of citrate buffer (10 mM, pH 4.0) and applied voltage of -20 kV, the separation of benzoic acid, D- and L-mandelic acid, phthalic acid and salicylic acid could be achieved within 12 min. The column efficiency for these acids was more than 1.2 x 10(5) plates m(-1), except salicylic acid.

Preparation and characterization of monolithic polymer columns for capillary electrochromatography

A series of micro-monolithic columns with different porosities were prepared for capillary electrochromatography (CEC) by in-situ copolymerization of butyl methacrylate, ethylene glycol dimethacrylate, and 2-acrylamido-2-methyl-1-propane-sulfonic acid in the presence of a porogen in fused-silica capillaries of 100 microm I.D. Different column porosities were obtained by changing the ratios of monomers to porogenic solvents. Columns were investigated and evaluated under both pressure-driven (high-performance liquid chromatography, HPLC) and electro-driven (capillary electrochromatography, CEC) conditions. Each column exhibited different efficiency and dependency on flow velocity under electro-driven conditions. Abnormally broad peaks for some relatively bulky molecules were observed. Possible explanations are discussed. The differences in column efficiency and retention behavior between the two eluent-driven modes were studied in detail. In addition, other column properties, such as morphology, porosity, stability and reproducibility, were extensively tested.