Preparation and evaluation of packed capillary columns for the separation of nucleic acids by ion-pair reversed-phase high-performance liquid chromatography

Evaluating the interplay among stationary phases/ion-pairing reagents/sequences for liquid chromatography mass spectrometry analysis of oligonucleotides

The correlation among stationary phases, ion-pairing reagents (IPR) and sequences for ion-pair reversed-phase liquid chromatography mass spectrometry (IP-RP LC-MS) analysis of oligonucleotide (ODN) remains unclear. The present study aimed to evaluate such correlation using particle-packed C18 columns in order to search for the optimal combination among them. Five C18 columns packed with core-shell silica, polymer, porous silica and hybrid particles, respectively, were evaluated for the analysis of synthetic and chemically modified ODNs with six different IPRs. Our results showed that silica-based porous particles, compared to other particles, retained ODN the strongest no matter which IPR was used. Meanwhile, among the six IPRs hexylamine (HA) produced the longest retention for all ODNs, regardless of the types of C18 particles. For the separation of ODNs, C18 columns performed similarly under identical LC conditions. However, the separation ability of C18 columns is highly dependent on the type of IPR and ODN sequences. Moreover, the type of particles has little impact on the signals of ODNs for the majority of synthetic sequences, but such impact could be dramatic for chemically modified sequences. On the other hand, both the type of IPR and ODN sequence have a significant effect on MS signals for synthetic and chemically modified ODNs.

A review on native and denaturing purification methods for non-coding RNA (ncRNA)

Recently, non-coding RNA (ncRNA) became the centerpiece of human genome research. Modern ncRNA-based research has revolutionized disease diagnosis and therapeutics. However, decoding structural/functional information of ncRNA requires large amount of pure RNA, and hence effective RNA preparation and purification protocols. This review focuses on purification schemes of synthetic oligonucleotides, particularly liquid chromatographic (LC) techniques as improved alternatives to urea-polyacrylamide gel electrophoresis (urea-PAGE) purification. Moreover, the review summarizes the shortcomings of urea-PAGE purification method and details the chromatographic purification such as affinity, ion-exchange (IE) or size-exclusion (SE) chromatography. Specifically, we discuss denaturing and native RNA purification schemes with newest developments. In short, the review evaluates nucleic acid purification schemes required for various structural analyses.

Analysis of oligonucleotides by ion-pair reversed-phase liquid chromatography coupled with positive mode electrospray ionization mass spectrometry

Oligonucleotides are usually analyzed by ion-pair reversed-phase liquid chromatography (IP-RPLC) coupled with negative mode electrospray ionization mass spectrometry (ESI-MS) due to their highly negative charged phosphodiester backbones. Herein, the signal suppression effect of triethylamine (TEA) adducts caused the ion-pair reagent TEA/hexafluoroisopropanol (HFIP) is greatly alleviated after improving the in-source energy in positive mode ESI-MS. This strategy is applied for different RNA sequencing through analyzing their formic acid hydrolysates via IP-RPLC MS. Comparing with negative ion mode, we demonstrate that IP-RPLC MS analysis in positive ion mode is more suitable for RNA sequencing with fewer contaminant interferences. Finally, simultaneous online separation and detection of oligonucleotides and protein digests are achieved in positive ion mode IP-RPLC MS analysis with little interference to each other.

Optimizing denaturing HPLC as a robust technique for identification of Short Tandem Repeats (STR) in forensic medicine

INTRODUCTION

Short Tandem Repeats (STRs) are defined as short lengths of 2-7 base pairs spreading through human genome which due to their highly diverse individually distribution are widely applied for identity detection and other forensic medicine purposes. Burdening considerable costs by the conventional methods such as capillary electrophoresis, we aimed to compare concomitant usage of multiplex PCR and denaturing high-performance liquid chromatography (DHPLC) as cheap, fast, highly accurate, and more accessible methods, with capillary electrophoresis (CE) to evaluate their potential for early screening of STRs.

MATERIALS AND METHODS

The present study randomly included 20 blood samples from the subjects referred to forensic medicine of Semnan, Iran. According to the size and allele frequency, we selected 8 major STR loci including CSF1PO, VWA, D18S51, TPOX, Amelogenin, FGA, SE33, and Penta D. A quad-STR multiplex PCR was performed for each locus and the PCR products were then analyzed using DHPLC machine and compared with the basic genetic properties obtained by capillary electrophoresis.

RESULTS

By optimizing the PCR and DHPLC conditions, our findings suggest this strategy as an effective method for STR detection. The genotypes were determined using size of loci which led to comparable results with capillary electrophoresis confirming an insignificant variation in the detection of TOPX, Amelogenin, CSF1PO, and D18S5 (p = 0.331), but discrepant results for FGA and VWA loci (p = 0.002).

CONCLUSION

Our study proposed DHPLC method as an effective screening method to characterize TOPX, Amelogenin, CSF1PO, and D18S51 as frequently used STR loci during identity detection in forensic medicine.

Comparison of different types of outlet frits in slurry-packed capillary columns

Fused-silica capillary columns for high-performance liquid chromatography with 320 and 250 μm inner diameter were prepared by slurry packing with 5 and 3 μm Nucleosil C18 stationary phase. Different types of mechanical and monolithic outlet frits were used and their influence on the resulting column performance was evaluated. Columns with quartz wool exhibited symmetrical peaks and low theoretical plate height, and the preparation time was short. The performance of monolithic frits varied based on type of monolith, length of the frit, and silanization procedure. The best frit performed similarly to the quartz wool ones, but the preparation took several hours. Their main advantage lies in the possibility of on-column detection, because the detection window can be burnt immediately behind the frit.

Preparation of porous polymer monoliths featuring enhanced surface coverage with gold nanoparticles

A new approach to the preparation of porous polymer monoliths with enhanced coverage of pore surface with gold nanoparticles has been developed. First, a generic poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith was reacted with cystamine followed by the cleavage of its disulfide bonds with tris(2-carboxylethyl)phosphine, which liberated the desired thiol groups. Dispersions of gold nanoparticles with sizes varying from 5 to 40 nm were then pumped through the functionalized monoliths. The materials were then analyzed using both energy dispersive X-ray spectroscopy and thermogravimetric analysis. We found that the quantity of attached gold was dependent on the size of nanoparticles, with the maximum attachment of more than 60 wt% being achieved with 40 nm nanoparticles. Scanning electron micrographs of the cross sections of all the monoliths revealed the formation of a non-aggregated, homogenous monolayer of nanoparticles. The surface of the bound gold was functionalized with 1-octanethiol and 1-octadecanethiol, and these monolithic columns were used successfully for the separations of proteins in reversed phase mode. The best separations were obtained using monoliths modified with 15, 20, and 30 nm nanoparticles since these sizes produced the most dense coverage of pore surface with gold.

Ascorbic acid for homogenous redox buffering in electrospray ionization-mass spectrometry

Electrospray ionization (ESI) involves the dispersion of a liquid containing analytes of interest into a fine aerosol by applying a high potential difference to the sample solution with respect to a counter electrode. Thus, from the electrochemical point of view, the ESI source represents a two-electrode controlled-current electrochemical flow cell. The electroactive compounds part of the solvent sprayed may be altered by occurring electrolysis (oxidation in positive ion mode and reduction in negative ion mode). These reactions can be troublesome in the context of unknown identification and quantification. In the search for a simple, inexpensive, and efficient way to suppress electrochemical oxidation in positive ESI, the usability of ascorbic acid, hydroquinone, and glutathione for homogenous redox buffering was tested. Performance of the antioxidants was assessed by analyzing pharmaceutical compounds covering a broad range of functional groups prone to oxidation. Different emitter setups were applied for continuous infusion, flow injection, and liquid chromatography/mass spectrometry experiments. Best performance was obtained with ascorbic acid. In comparison to hydroquinone and glutathione, ascorbic acid offered superior antioxidant activity, a relatively inert oxidation product, and hardly any negative effect on the ionization efficiency of analytes. Furthermore, ascorbic acid suppressed the formation of sodiated forms and was able to induce charge state reduction. Only in the very special case of analyzing a compound isobaric to ascorbic acid, interference with the low-abundant [ascorbic acid+H](+) signal may become a point of attention.

An optimized electrochemistry-liquid chromatography-mass spectrometry method for studying guanosine oxidation

Oxidative stress can disrupt the integrity of genetic material. Due to its importance in the pathogenesis of different kinds of disease, including neurodegenerative disease, cardiovascular disease and cancer, major efforts are put into the elucidation of mechanisms involved. Herein, the combination of electrochemistry/liquid chromatography/mass spectrometry (EC/LC/MS) is presented as convenient, fast and simple method to study nucleic acids oxidation. Guanosine was selected as test compound. 8-Hydroxyguanosine and (guanosine-H)₂ were identified as primary oxidation products. Oxidation was accomplished in an electrochemical thin-layer cell integrated in the flow path of the autosampler of the chromatographic system. The reaction mixture was separated and mass analyzed by LC/MS. The use of LC was found to be particularly beneficial to resolve isobaric oxidation products. Another advantage of the setup used was the ability to decouple the electrochemical cell and the electrospray ionization source from each other eliminating any kind of cell potential interaction. Separation of EC from LC/MS, furthermore, facilitates method optimization. Experimental parameters were optimized for both techniques independently. Highest yields and best detectability of oxidation products were obtained with 10 mM ammonium formate at physiological pH delivered at a flow rate of 2.5-5 μL/min through the electrochemical cell.

Comprehensive hydrophilic interaction and ion-pair reversed-phase liquid chromatography for analysis of di- to deca-oligonucleotides

A comprehensive two-dimensional HPLC approach with a high degree of orthogonality was developed for analysis of di- to deca-oligonucleotides (ONs). Hydrophilic interaction liquid chromatography (HILIC) was used in the first dimension, and ion-pair reversed-phase liquid chromatography (IP-RPLC) was employed in the second dimension. The two dimensions were connected via a ten-port valve interface equipped with octadecyl silica (ODS) traps to immobilize and focus the ONs eluting from the first dimension prior to IP-RPLC separation. An aqueous make-up flow was used for effective trapping. The comprehensive two-dimensional HPLC system was optimized with a mixture consisting of 27 oligonucleotide standards. An overall chromatographic peak capacity of 500 was obtained. The use of the volatile buffer triethylamine acetate in the second dimension allowed straightforward coupling to electrospray ionization mass spectrometry (ESI-MS) and detection of each ON in the negative ionization mode.

Advances in mass spectrometry for the identification of pathogens

Mass spectrometry (MS) has become an important technique to identify microbial biomarkers. The rapid and accurate MS identification of microorganisms without any extensive pretreatment of samples is now possible. This review summarizes MS methods that are currently utilized in microbial analyses. Affinity methods are effective to clean, enrich, and investigate microorganisms from complex matrices. Functionalized magnetic nanoparticles might concentrate traces of target microorganisms from sample solutions. Therefore, nanoparticle-based techniques have a favorable detection limit. MS coupled with various chromatographic techniques, such as liquid chromatography and capillary electrophoresis, reduces the complexity of microbial biomarkers and yields reliable results. The direct analysis of whole pathogenic microbial cells with matrix-assisted laser desorption/ionization MS without sample separation reveals specific biomarkers for taxonomy, and has the advantages of simplicity, rapidity, and high-throughput measurements. The MS detection of polymerase chain reaction (PCR)-amplified microbial nucleic acids provides an alternative to biomarker analysis. This review will conclude with some current applications of MS in the identification of pathogens.

Formation and characterization of covalent guanosine adducts with electrochemistry-liquid chromatography-mass spectrometry

Chemicals can interact with the genetic material giving rise to the formation of covalent adducts. These alterations can lead to adverse consequences, including cancer, reproductive impairment, development anomalies, or genetic diseases. In search for an assay allowing identification of hazardous compounds that might form covalent adducts with nucleic acids, electrochemistry (EC)/liquid chromatography (LC)/mass spectrometry (MS) is presented. EC/LC/MS is a purely instrumental approach. EC is used for oxidative activation, LC for the fractionation of the reaction mixture, and MS for the detection and characterization of the reaction products. To test the system capabilities, we investigated the formation of covalent adducts produced by guanosine and acetaminophen (APAP). Electrochemical activation of mixtures of guanosine and APAP gave rise to the formation of four isomers of (guanosine + APAP-2H). Mass voltammograms as well as dose–response-curves were used to obtain insights in the mechanism of adduct formation. These experiments revealed that a mechanism involving radical intermediates is favored. The initial step of adduct formation is the conversion of both APAP and guanosine into radicals via one-electron–one-proton reactions. Among different competing reaction pathways, the generated radical intermediates undergo intermolecular reactions to form covalent adducts between guanosine and APAP.

Unraveling the metabolic transformation of tetrazepam to diazepam with mass spectrometric methods

The metabolic transformation pathways of the 1,4-benzodiazepine tetrazepam (C(16)H(17)ClN(2)O, average mass: 288.772) were studied with capillary LC-QqTOF-MS and -MS/MS by analyzing human plasma and urine samples collected from healthy volunteers. Each volunteer took 50 mg of tetrazepam, given in the form of one tablet of Myolastan (Sanofi-Synthelabo, Vienna, Austria). Accurate molecular mass measurements in full-scan mode (scan range: 50-700) were used to survey the collected samples for putative metabolic transformation products. Full-scan fragment ion mass spectra were collected in subsequent LC/MS/MS experiments. Each spectrum was matched to a spectral library containing 3759 MS/MS-spectra of 402 compounds, including eighteen different benzodiazepines, to prove the structural relatedness of a tentative metabolite to tetrazepam. This "similarity search" approach provided a rapid and powerful tool to exclude non-drug-related species, even without any knowledge of the fragmentation chemistry. Interpretation of tandem mass spectrometric data was only required in order to elucidate the site of transformation. Using this strategy, 11 major classes of tetrazepam metabolites were identified. Possible metabolic routes from tetrazepam to diazepam (C(16)H(13)ClN(2)O, average mass: 284.740) via repeated hydroxylation and dehydration of the cylohexenyl moiety were discovered. No evidence for extensive hydroxylation of tetrazepam at position 3 of the diazepine ring was found. In contrast to what is commonly believed, this distinct transformation reaction may be of only minor importance. Furthermore, the occurrence of demethylation, hydration, and glucuronidation reactions was proven.

Forensic DNA fingerprinting by liquid chromatography-electrospray ionization mass spectrometry

The determination of the molecular mass of a DNA sequence has several benefits over conventional fragment-length analysis that are advantageous to the forensic field: (i) sequence variation is captured that increases the power of discrimination compared with that obtained by conventional fragment-length analysis. First experiments showed that this increase makes up to 20%-30% for STR analysis. The new technical approach does not invalidate established developments and data, but adds to this information with additional discriminative categories. (ii) ICEMS is faster and cheaper than electrophoresis, does not require internal size standards, allelic ladders, or spectral calibration, which are necessary for fluorescence-based electrophoresis. (iii) ICEMS can unequivocally detect any single sequence variation in DNA molecules with lengths up to 250 nucleotides. This allows for maximum discrimination of forensically relevant DNA fragments, covering all sorts of STRs, SNPs, and also the analysis of the hypervariable segments of mtDNA. More effort, however, needs to be put into software development that escorts the analysis and data interpretation processes to make this technology manageable for the practical user.

Novel monolithic poly(phenyl acrylate-co-1,4-phenylene diacrylate) capillary columns for biopolymer chromatography

Monolithic capillary columns were prepared by thermally initiated free radical polymerisation of phenyl acrylate (PA) and 1,4-phenylene diacrylate (PDA) in the confines of 200 microm I.D. fused silica capillaries. Polymerisation was performed in the presence of 2-propanol and tetrahydrofuran (THF) as inert diluents (porogens), using alpha,alpha'-azoisobutyronitrile (AIBN) as initiator. Morphology and porosity of the resulting monoliths were comprehensively studied by scanning electron microscopy (SEM), mercury intrusion porosimetry and inverse size-exclusion chromatography (ISEC). The novel poly(phenyl acrylate-co-1,4-phenylene diacrylate) (PA/PDA) monoliths showed high mechanical stability and were successfully applied to the separation of proteins and oligodeoxynucleotides, employing reversed-phase (RP) and ion-pair reversed-phase (IP-RP) conditions, respectively. Maximum loading capacities for cytochrome c and d(pT)(16) were evaluated and found to be in the region of 200 fmol. Batch-to-batch reproducibility was determined for three independently prepared PA/PDA monolithic capillary columns. Relative standard deviations (RSDs) of retention time (t(R)) of 0.7-1.6% for proteins and 0.2-2.5% for d(pT)(12-18) proved high reproducibility of the PA/PDA supports.

Proteomic profiling identifies breast tumor metastasis-associated factors in an isogenic model

A combination of LC and MS was applied to an isogenic breast tumor metastasis model to identify proteins associated with a cellular phenotype. Chromatofocusing followed by nonporous-RP-HPLC/ESI-TOF MS was applied to cell lysates of a pair of monoclonal cell lines from the human breast carcinoma cell line MDA-MB-435 that have different metastatic phenotypes in immune-compromised mice. This method was developed to separate proteins based on pI and hydrophobicity. The high resolution and mass accuracy of ESI-TOF measurements provided a good correlation of theoretical MW and experimental Mr values of intact proteins measured in mass maps obtained in the pH range 3.8-6.4. The isolated proteins were digested by trypsin and analyzed by MALDI-TOF MS, MALDI-QIT-TOF MS, and monolith-based HPLC/MS/MS. The unique combination of the techniques provided valuable information including quantitation and modification of proteins. We identified 89 selected proteins, of which 43 were confirmed as differentially expressed. Metastasis-associated proteins included galectin-1, whereas annexin I and annexin II were associated with the nonmetastatic phenotype. In this study, we demonstrate that combining a variety of MS tools with a multidimensional liquid-phase separation provides the ability to map cellular protein content, to search for modified proteins, and to correlate protein expression with cellular phenotype.

Monolithic poly[(trimethylsilyl-4-methylstyrene)-co- bis(4-vinylbenzyl)dimethylsilane] stationary phases for the fast separation of proteins and oligonucleotides

In this paper the synthesis, optimisation and application of a silane based monolithic copolymer for the rapid separation of proteins and oligonucleotides is described. The monolith was prepared by thermal initiated in situ copolymerisation of trimethylsilyl-4-methylstyrene (TMSiMS) and bis(4-vinylbenzyl)dimethylsilane (BVBDMSi) in a silanised 200 microm I.D. fused silica column. Different ratios of monomer and crosslinker, as well as different ratios of micro- (toluene) and macro-porogen (2-propanol) were used for optimising the physical properties of the stationary phase regarding separation efficiency. The prepared monolithic stationary phases were characterised by measurement of permeability with different solvents, determination of pore size distribution by mercury intrusion porosimetry (MIP). Morphology was studied by scanning electron microscopy (SEM). Applying optimised conditions, a mixture comprised of five standard proteins ribunuclease A, cytochrome c, alpha-lactalbumine, myoglobine and ovalbumine was separated within 1 min by ion-pair reversed-phase liquid chromatography (IP-RPLC) obtaining half-height peak widths between 1.8 and 2.4 s. Baseline separation of oligonucleotides d(pT)(12-18) was achieved within 1.8 min obtaining half-height peak widths between 3.6 and 5.4 s. The results demonstrate the high potential of this stationary phase for fast separation of high-molecular weight biomolecules such as oligonucleotides and proteins.

Hydroxymethyl methacrylate-based monolithic columns designed for separation of oligonucleotides in hydrophilic-interaction capillary liquid chromatography

Hydroxymethyl methacrylate-based monolithic columns for separation of oligonucleotides by capillary liquid chromatography (CLC) were prepared. We optimized composition of the polymerization mixture, which contained the monomer mixture consisting of N-(hydroxymethyl) methacrylamide (HMMAA) and ethylene dimethacrylate (EDMA), and the porogenic system composed of propane-1-ol, butane-1,4-diol and alpha, alpha'-azoisobutyronitrile (AIBN) as initiator. Separations of oligonucleotides were performed in HILIC (hydrophilic-interaction) mode using 100 mM triethylamine acetate (TEAA) in acetonitrile and in water as eluents. The influence of steepness of the mobile phase gradient on separation of the oligonucleotides was evaluated as well as the reproducibility of HMMAA monolith preparation.

Tailoring the Morphology of Methacrylate Ester-Based Monoliths for Optimum Efficiency in Liquid Chromatography

Methacrylate ester-based monolithic stationary phases were prepared in situ in fused-silica capillaries and simultaneously in vials. The influence of the composition of the polymerization mixture on the morphology was studied with mercury intrusion porosimetry, scanning electron microscopy, and nitrogen adsorption measurements. A high-density porous polymeric material with a unimodal pore-size distribution was prepared with 40 wt % monomers and 60 wt % solvent in the mixture. A low-density material, prepared with a 20:80 ratio of monomers versus pore-forming solvent, showed a bimodal pore-size distribution and a much finer structure than the high-density monolith. The characteristic pore size could be controlled by changing the ratio of pore-forming solvents. With increasing solvent polarity, both the pore size and the dimension of the globules increased. The best efficiency in the CEC mode was obtained with an average pore size of 600 nm. Low-density monoliths exhibited lower A- and C-terms than high-density monoliths. With the optimal monolithic material, a minimum plate height of 5 mum could be obtained. The low-density monolith also performed better in the HPLC mode, giving a minimum plate height of 15 mum and a much higher flow permeability than that of the high-density material.

Comparing monolithic and microparticular capillary columns for the separation and analysis of peptide mixtures by liquid chromatography-mass spectrometry

A mixture of ten proteins was trypsinized and injected onto poly-(styrene-divinylben-zene) monolithic columns (60 x 0.20 or 0.10 mm ID) and a column packed with C18 silica particles (75 x 0.075 mm ID), respectively. The columns were eluted at 200-2000 nL/min with gradients of ACN in 0.050% TFA. Eluting peptides were detected by ESI-MS/MS and subsequently identified by database searching. The 100 microm ID monolithic column showed the highest cumulative Mowse scores based on the highest ion scores for the peptides and the largest number of identified peptides. It is shown that the number of identified peptides strongly depends on the dynamic range within the peptide mixture. In consequence, all proteins were identified in a mixture of relatively balanced analyte amounts (12.5-80 fmol) whereas only peptides for six out of ten proteins were found in a sample of high-dynamic range (0.65-270 fmol). The 100 microm monolithic column showed the highest reproducibility for peptide identifications in three consecutive runs. Depending on sample amount, 57-72% of the identified peptides were detectable in each of the three runs of triplicate analyses. The results demonstrate the high suitability of 100 microm monolithic columns for high-resolution peptide separations in proteomic research.

Characterization of methacrylate monoliths for purification of DNA molecules

The suitability of methacrylate based anion exchange monolithic supports for the separation and purification of plasmid and genomic DNA has been explored. The effect of the size of the channels, ionic strength of the solution, and ligand density on the dynamic binding capacity has been investigated. The dynamic binding capacity was found to be flow independent, at least up to a linear velocity of 700 cm h(-1), and exceeded 9 mg mL(-1) for all types of DNA. The recovery depends on the pH value of the mobile phase and its ionic strength as well as on the density of the active groups. Under optimal conditions recoveries exceeding 80% were obtained even for genomic DNA. Finally, the suitability of this approach is demonstrated by purification of a real-life sample.

Study of short polystyrene monolith-fritted micro-liquid chromatography columns for analysis of neutral and basic compounds

This study details the effects of poly(styrene-divinylbenzene) (PS-DVB) frits in micro-HPLC columns for the separation of neutral and basic compounds. The procedure comprised the optimization of separations with only monolith or conventional fritted columns followed by method transference to short monolith-fritted columns. It was observed that a superior separation was achieved with the new columns compared to silica-fritted-packed columns once triethylamine (TEA) was added in small percentages. The separation of basic and neutral compounds was achieved in fast analysis times in the isocratic mode.

Preparation and HPLC applications of rigid macroporous organic polymer monoliths

Rigid porous polymer monoliths are a new class of materials that emerged in the early 1990s. These monolithic materials are typically prepared using a simple molding process carried out within the confines of a closed mold. For example, polymerization of a mixture comprising monomers, free-radical initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. The versatility of the preparation technique is demonstrated by its use with hydrophobic, hydrophilic, ionizable, and zwitterionic monomers. Several system variables can be used to control the porous properties of the monolith over a broad range and to mediate the hydrodynamic properties of the monolithic devices. A variety of methods such as direct copolymerization of functional monomers, chemical modification of reactive groups, and grafting of pore surface with selected polymer chains is available for the control of surface chemistry. Since all the mobile phase must flow through the monolith, the convection considerably accelerates mass transport within the molded material, and the monolithic devices perform well, even at very high flow rates. The applications of polymeric monolithic materials are demonstrated mostly on the separations in the HPLC mode, although CEC, gas chromatography, enzyme immobilization, molecular recognition, advanced detection systems, and microfluidic devices are also mentioned.

Characterization of some physical and chromatographic properties of monolithic poly(styrene–co-divinylbenzene) columns

Monolithic capillary columns were prepared by copolymerization of styrene and divinylbenzene inside a 200 microm i.d. fused silica capillary using a mixture of tetrahydrofuran and decanol as porogen. Important chromatographic features of the synthesized columns were characterized and critically compared to the properties of columns packed with micropellicular, octadecylated poly(styrene-co-divinylbenzene) (PS-DVB-C18) particles. The permeability of a 60 mm long monolithic column was slightly higher than that of an equally dimensioned column packed with PS-DVB-C18 beads and was invariant up to at least 250 bar column inlet pressure, indicating the high-pressure stability of the monolithic columns. Interestingly, monolithic columns showed a 3.6 times better separation efficiency for oligonucleotides than granular columns. To study differences of the molecular diffusion processes between granular and monolithic columns, Van Deemter plots were measured. Due to the favorable pore structure of monolithic columns all kind of diffusional band broadening was reduced two to five times. Using inverse size-exclusion chromatography a total porosity of 70% was determined, which consisted of internodule porosity (20%) and internal porosity (50%). The observed fast mass transfer and the resulting high separation efficiency suggested that the surface of the monolithic stationary phase is rather rough and does not feature real pores accessible to macromolecular analytes such as polypeptides or oligonucleotides. The maximum analytical loading capacity of monolithic columns for oligonucleotides was found to be in the region of 500 fmol, which compared well to the loading capacity of the granular columns. Batch-to-batch reproducibility proved to be better with granular stationary phases compared to monolithic stationary phase, in which each column bed is the result of a unique column preparation process.

High-performance liquid chromatography purification of 26-bp serial analysis of gene expression ditags results in higher yields, longer concatemers, and substantial time savings

In contrast to DNA chips, serial analysis of gene expression (SAGE) is not dependent on genes having been previously identified for their monitoring. Although useful, the method can be technically challenging, and particularly the last steps including concatenation and cloning may result in less than optimal results. We propose that many of the encountered problems can be attributed to the purification of the 26-bp ditags by polyacrylamide gel electrophoresis. Low yields, gel contaminants, potential exposure to degrading enzymes during handling and lengthy separation all disfavor the method. We introduce purification of 26-bp ditags by reverse-phase high-performance liquid chromatography (HPLC) using polystyrene/divinylbenzene columns and tetraethylammonium acetate buffer with acetonitrile as mobile phase. The method is fast and gives excellent results. Ditags purified by HPLC readily ligate to high-molecular-weight concatemers leading to their efficient cloning. The method should substantially facilitate the construction of SAGE libraries.

A decade of high-resolution liquid chromatography of nucleic acids on styrene-divinylbenzene copolymers

The introduction of alkylated, nonporous poly-(styrene-divinylbenzene) microparticles in 1992 enabled the subsequent development of denaturing HPLC that has emerged as the most sensitive screening method for mutations to date. Denaturing HPLC has provided unprecedented insight into human origins and prehistoric migrations, accelerated the cloning of genes involved in mono- and polygenic traits, and facilitated the mutational analysis of more than a hundred candidate genes of human disease. A significant step toward increased sample-throughput and information content was accomplished by the recent introduction of monolithic poly(styrene-divinylbenzene) capillary columns. They have enabled the construction of capillary arrays amenable to multiplex analysis of fluorescent dye-labeled nucleic acids by laser-induced fluorescence detection. Hyphenation of denaturing HPLC with electrospray ionization mass spectrometry, on the other hand, has allowed the direct elucidation of the chemical nature of DNA variation and determination of phase of multiple alleles on a chromosome.

Single nucleotide polymorphism genotyping by on-line liquid chromatography-mass spectrometry in forensic science of the Y-chromosomal locus M9

A method is described for genotyping alleles of the Y-chromosomal locus M9, incorporating DNA extraction, amplification by polymerase chain reaction (PCR), sample purification by ion-pair reversed-phase high-performance liquid chromatography (IP-RP-HPLC), and allele identification by on-line hyphenation to electrospray ionization mass spectrometry (ESI-MS). The alleles G and C were differentiated in 114 base pair amplicons on the basis of intact molecular mass measurements with a mass accuracy between 0.007 and 0.017%. The accuracy of mass determination was significantly reduced to less than 0.0036% upon amplification of a short, 61 bp fragment. The application of steep gradients of acetonitrile in 25 mM butyldimethylammonium bicarbonate not only enabled the efficient separation of non-target components from the PCR product in a monolithic, poly-(styrene-divinylbenzene)-based capillary column, but also allowed the high-throughput analysis of the PCR products with cycle times of 2 min. The new method was compared to a conventional restriction fragment length polymorphism assay with capillary gel electrophoretic analysis. In a blind study, 90 samples of unrelated individuals were genotyped. The high accuracy (<0.004%) and small relative standard deviation (<0.007%, n=20) of mass measurements, which enables even the differentiation of A and T alleles with a mass difference of 9 mass units, make IP-RP-HPLC-ESI-MS a potent tool for the routine characterization of SNPs in forensic science.

Porous polymer monoliths: an alternative to classical beads

Porous polymer monoliths are a new category of materials developed during the last decade. These materials are prepared using a simple molding process carried out within the confines of a closed mold. Polymerization of a mixture that typically contains monomers, free-radical initiator, and porogenic solvent affords macroporous materials with large through-pores that enable flow-through applications. The versatility of the preparation technique is demonstrated by its use with hydrophobic, hydrophilic, ionizable, and zwitterionic monomers. The porous properties of the monolith can be controlled over a broad range. These, in turn, determine the hydrodynamic properties of the devices that contain the molded media. Since all the mobile phase must flow through the monolith, the mass transport within the molded material is dominated very much by convection, and the monolithic devices perform well even at very high flow rates. The applications of monolithic materials are demonstrated on the chromatographic separation of biological compounds and synthetic polymers, electrochromatography, gas chromatography, enzyme immobilization, molecular recognition, and in advanced detection systems. Grafting of the pore walls with selected polymers leads to materials with completely changed surface chemistries.

Analysis of nucleic acids by on-line liquid chromatography-mass spectrometry

The numerous problems posed by modern biochemistry, biology, and medicine, as well as the growing significance of genetic engineering require the application of fast and reliable methods of utmost sensitivity and selectivity for the analysis of nucleic acids. High-performance liquid chromatography (HPLC) and mass spectrometry (MS) represent established analytical techniques for the characterization and structural elucidation of single- and double-stranded nucleic acids, ranging in size from a few nucleotides to several thousand base pairs. Although both techniques are independently applicable for nucleic acid analysis, the on-line hyphenation significantly enhances their potential for the robust and fully automable routine analysis of minute amounts of biological samples. Among the various chromatographic and mass spectrometric modes available in principle, ion-pair reversed-phase HPLC and electrospray ionization mass spectrometry (ESI-MS) have been shown to be the most suitable for the direct interfacing of liquid chromatography (LC) and MS. Instrumental setup, as well as chromatographic and mass spectrometric experimental conditions, need to be carefully selected in order to maximize the performance of the hyphenated analytical system. Applications of HPLC-ESI-MS include the characterization of oligodeoxynucleotides synthesized by solid-phase synthesis, the analysis of antisense oligodeoxynucleotides, oligonucleotide metabolites, and DNA adducts, the analysis of genomic segments specifically amplified by the polymerase chain reaction (PCR), the characterization of ribonucleic acids, the sizing of double-stranded DNA restriction fragments, the genotyping of short tandem repeats (STRs) and single nucleotide polymorphisms (SNPs), the detection of mutations in nucleic acid sequences, and the sequencing of nucleic acids.

Mutation detection by capillary denaturing high-performance liquid chromatography using monolithic columns

The high resolving power of the chromatographic separation of single- and double-stranded nucleic acids in 200 microm i.d. monolithic poly(styrene-divinylbenzene) capillary columns was utilized for mutation screening in polymerase chain reaction amplified polymorphic loci. Recognition of mutations is based on the separation of homo- and heteroduplex species by ion-pair reversed-phase high-performance liquid chromatography (IP-RP-HPLC) under partially denaturing conditions, resulting in characteristic peak patterns both for homozygous and heterozygous samples. Six different single nucleotide substitutions and combinations thereof were confidently identified in 413 bp amplicons from six heterozygous individuals each of which yielded a different unique chromatographic profile. Alternatively, mutations were identified in short, 62 bp PCR products upon their complete on-line denaturation at 75 degrees C taking advantage of the ability of IP-RP-HPLC to resolve single-stranded nucleic acids of identical length that differ in a single nucleotide. Separations in monolithic capillary columns can be readily hyphenated to electrospray ionization mass spectrometry and promise increased sample throughput by operating in arrays similar to those already used in capillary electrophoresis.