Determination of polycyclic aromatic hydrocarbons in automobile exhaust by means of high-performance liquid chromatography with fluorescence detection

Analysis of polynuclear aromatic hydrocarbons in heavy products derived from coal and petroleum by high performance liquid chromatography

A systematic study was made on the identification and quantitative determination of polynuclear aromatic hydrocarbons (PAHs) in heavy products derived from coal and petroleum with high performance liquid chromatography (HPLC). After the separation of PAHs by a high-resolution column, identification was made through four methods: (1) the relative retention time (RRT) method, (2) the stop-flow-UV scanning method, (3) the method of fluorescence characteristic index Phi' and (4) the method of V' index at different UV wavelengths. For the quantitative determination of the components, methods of external standard (E-X), internal standard (I-N) and external standard-response factors (E-F) were compared. The E-F method was recommended by the present paper. For the determination of quantitative response factors (F) two methods were studied, including the HPLC peak-area method (Peak-area method) and the UV absorbance method using a UV spectrometer (absorbance method). The absorbance method was better and is recommended by the present paper. The F values of 30 PAHs from the two different methods are given. The samples analyzed include a coal tar pitch, a thermal cracking residue oil and a residual oil from ethylene production.

Method of determination of emission properties of very weakly emitting species ensuring elimination of emission of impurities

This paper describes a new type of spectrofluorimeter, composed of a high-performance liquid chromatography (HPLC) system directly connected to a fluorescence detector and an absorption photodiode array detector, designed for studying the emission of weakly emitting species. Procedures for measurements of emission spectra (ES), emission excitation spectra (EES), and quantum yields of emission (PhiE) for very weakly emitting systems (PhiE>or=10(-7)) have been proposed. The original methodical solution allows verification of whether the emission observed comes solely from the compound studied (and not from its impurities) or from some photochemical or thermal process taking place during measurements. Thanks to the use of this new type of spectrofluorimeter, it is possible to establish with a high probability that the dependence of the shape and position of the ES on the excitation wavelength and the differences between EES and absorptance spectra are due to photophysical and/or photochemical properties of the compound studied and not due to the presence of emitting impurities. An especially interesting application of this method is to study the emission of species whose very weak emission is related to a very short lifetime as well as a low radiative rate constant. It is particularly suitable to the study of the emission properties of flexible molecules that can occur in a few conformers of different absorption and emission properties. The performance of the method is illustrated by the results of the emission studies carried out for Nalpha-acetyl-2-(uracil-5-yl)-L-tryptophan N-ethylamide.

ATSDR evaluation of health effects of chemicals. IV. Polycyclic aromatic hydrocarbons (PAHs): understanding a complex problem

Polycyclic Aromatic Hydrocarbons (PAHs) are a group of chemicals that are formed during the incomplete burning of coal, oil, gas, wood, garbage, or other organic substances, such as tobacco and charbroiled meat. There are more than 100 PAHs. PAHs generally occur as complex mixtures (for example, as part of products such as soot), not as single compounds. PAHs are found throughout the environment in the air, water, and soil. As part of its mandate, the Agency for Toxic Substances and Disease Registry (ATSDR) prepares toxicological profiles on hazardous chemicals, including PAHs (ATSDR, 1995), found at facilities on the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) National Priorities List (NPL) and which pose the most significant potential threat to human health, as determined by ATSDR and the Environmental Protection Agency (EPA). These profiles include information on health effects of chemicals from different routes and durations of exposure, their potential for exposure, regulations and advisories, and the adequacy of the existing database. Assessing the health effects of PAHs is a major challenge because environmental exposures to these chemicals are usually to complex mixtures of PAHs with other chemicals. The biological consequences of human exposure to mixtures of PAHs depend on the toxicity, carcinogenic and noncarcinogenic, of the individual components of the mixture, the types of interactions among them, and confounding factors that are not thoroughly understood. Also identified are components of exposure and health effects research needed on PAHs that will allow estimation of realistic human health risks posed by exposures to PAHs. The exposure assessment component of research should focus on (1) development of reliable analytical methods for the determination of bioavailable PAHs following ingestion, (2) estimation of bioavailable PAHs from environmental media, particularly the determination of particle-bound PAHs, (3) data on ambient levels of PAHs metabolites in tissues/fluids of control populations, and (4) the need for a critical evaluation of current levels of PAHs found in environmental media including data from hazardous waste sites. The health effects component should focus on obtaining information on (1) the health effects of mixtures of PAHs particularly their noncarcinogenic effects in humans, and (2) their toxicokinetics. This report provides excerpts from the toxicological profile of PAHs (ATSDR, 1995) that contains more detailed information.

Environmental monitoring of mutagenic/carcinogenic hazards during road paving operations with bitumens

Environmental monitoring of mutagenic/carcinogenic hazards associated with occupational exposure to bitumen fumes was performed during road paving operations. Bitumen samples were collected and analysed for polycyclic aromatic hydrocarbons (PAH) content by HPLC and for mutagenicity by the Ames test. The exposure of sixteen road workers to bitumen fumes was studied. Time-weighted average values of bitumen fumes were determined by personal samplers. PAH concentration in the air and the mutagenicity of airborne particulates were also analysed. The results showed that bitumen samples contained low levels of total PAH (microgram/g) and were not mutagenic. Environmental monitoring showed a low level of exposure to bitumen fumes, which were found to contain only trace levels of PAH and not to be mutagenic. The authors suggest that these workers' exposure to mutagenic/carcinogenic agents is low.

Determination of polycyclic aromatic hydrocarbons in diesel exhaust particulate matter and diesel fuel oil

Clean-up procedures were developed for a method for determining the amount of polycyclic aromatic hydrocarbons (PAHs) in diesel exhaust particulate matter and in diesel fuel oils using reversed-phase high-performance liquid chromatography (HPLC). They were based mainly on the elimination of insoluble matter and aliphatic compounds that affect the performance of HPLC, from the dichloromethane extracts of particulate matter or from oils, with the aid of a disposable preparation column containing reversed-phase packings (Sep-Pak C18). Using these procedures, it is possible to detect 1 ng of benzo(a)pyrene in 30 mg of particulate matter with more than a 97% recovery or 0.5 ng in 50 microliters of oil with 91% recovery. Examples of analyses are given for particulate matter emitted from a diesel test engine and for diesel fuel oils, such as gas oil, residual oil and coal-liquefied oil.