Electrokinetic chromatography without electroosmotic flow

Simultaneous determination of dihydroxybenzene and phenylenediamine positional isomers using capillary zone electrophoresis coupled with amperometric detection

In general capillary zone electrophoresis (CZE) separation models, o-, m-, and p-phenylenediamine isomers can be separated in a weak acidic running buffer for their pK(a) values being 4.52, 5.64, 6.04, respectively, while o-, m-, and p-dihydroxybenzene isomers can be separated in a weak basic buffer for their pK(a) values being 9.40, 9.40 and 10.04, respectively. So, it is hard to find a suitable running buffer at a fixed pH in normal CZE for simultaneous separation of these two groups of positional isomers. In this paper, a novel method based on alternately running two different pH buffers in CZE coupled with amperometric detection (CZE-AD) was designed to simultaneously determine these two groups of positional isomers. It is found that when two different pH running buffers were employed alternately under appropriate order and time, the six analytes could be separated perfectly in less than 20 min and the detection limits were as low as 10(-7) mol/L. Furthermore, the effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time on CZE-AD were investigated. Experimental results demonstrated that the introduced method was practical to simultaneously determine two groups of positional isomers with different pK(a) and had some advantages of high sensitivity, good repeatability and small sample requirement.

Microemulsion electrokinetic chromatography for separation and analysis of curcuminoids in turmeric samples

Microemulsion EKC (MEEKC) was developed for quantitative analysis of curcuminoids, such as curcumin (C), demethoxycurcumin (D), and bis-demethoxycurcumin (B). MEEKC separation of curcuminoids was optimized, and a change in resolution was explained using a modified equation for resolution in MEEKC without electroosmosis. The suitable MEEKC conditions for separation of curcuminoids were obtained to be the microemulsion buffer containing 50 mM phosphate buffer at pH 2.5, 1.1% v/v n-octane as oil droplets, 180 mM SDS as surfactant, 890 mM 1-butanol as cosurfactant, and 25% v/v 2-propanol as organic cosolvent; applied voltage of -15 kV; and separation temperature 25 degrees C. Achieved baseline resolution of C:D and D:B was obtained with R(s) -2.4 and analysis time within 18 min. In addition, high accuracy and precision of the method were obtained. This MEEKC method was used for quantitative determination of individual curcuminoids in medicinal turmeric capsules and powdered turmeric used as coloring additive in food, with simple sample preparation such as solvent extraction, dilution, and filtration, and without cleaning up by SPE.

Electrophoretic Effects of the Adsorption of Anionic Surfactants to Poly(dimethylsiloxane)-Coated Capillaries

Poly(dimethylsiloxane) (PDMS) is one of the most convenient materials to construct capillary electrophoresis microchips. Even though PDMS has many advantages, its use is often limited by its hydrophobicity. Although it is well-known that the surface properties of PDMS can be modified by anionic surfactants, very little is known regarding the driving forces or the electrophoretic consequences of the adsorption of anionic surfactants. In this work, the adsorption of alkyl surfactants on PDMS was studied by performing electroosmotic flow (microEOF) measurements. In order to mimic the behavior of PDMS microchannels, fused-silica capillaries were coated with PDMS and used for the microEOF measurements. This approach allowed using standard CE instrumentation and provided significant advantages over similar experiments performed on microchips. The change in the microEOF in the presence of surfactants was correlated to the surfactant adsorbed amount which, plotted versus surfactant concentration, gives an adsorption isotherm. The adsorption isotherms were obtained using alkyl surfactants with different chain lengths and head groups. According to our results, the interaction of alkyl surfactants with the PDMS surface is determined by a combination of hydrophobic and electrostatic interactions, where the former is more significant than the latter. The affinity of each surfactant for the PDMS surface was calculated by fitting the adsorption profiles with a Langmuir equation and, in the case of single-charged surfactants, correlated to the corresponding cmc value.

Electrophoretic separation of environmentally important phenolic compounds using montomorillonite-coated fused-silica capillaries

This paper reports a simple procedure for coating fused-silica capillaries with poly(diallyldimethyl ammonium chloride) and montmorillonite. The coated capillaries were characterized by performing EOF measurements as a function of buffer pH, number of layers of coating, and number of runs (stability). The coated capillaries showed a highly stable mu(EOF) (run-to-run RSD less than 1.5%, n = 20), allowing continuous use for several days without conditioning. The coated capillaries were then used for the effective separation of nine environmentally important phenolic compounds showing a significant improvement in the resolution, when compared to bare fused-silica capillaries. The EOF of the coated capillaries was constant in alkaline solutions (pH > or = 7), allowing the optimization of the separation conditions of phenolic compounds without significantly affecting the mu(EOF).

The effects of alkyl sulfates on the analysis of phenolic compounds by microchip capillary electrophoresis with pulsed amperometric detection

The effects of different surfactants (sodium 2-ethylhexyl sulfate, sodium decyl sulfate, sodium dodecyl sulfate and sodium tetradecyl sulfate) on the analysis of phenolic compounds by microchip-CE with pulsed amperometric detection were investigated. Using sodium decyl sulfate as a model surfactant, the effects of concentration and pH were examined. Under the optimized conditions, the analysis of six phenolic compounds was performed and compared with control runs performed without surfactant. When these surfactants were present in the run buffer, decreases in the migration time and increases in the run-to-run reproducibility were observed. Systematic improvements in the electrochemical response for the phenolic compounds were also obtained. According to the results presented, surfactants enhance the analyte-electrode interaction and facilitate the electron transfer process. These results should allow a more rational selection of the surfactants based on their electrophoretic and electrochemical effects.

On-line preconcentration techniques in determination of melatonin and its precursors/metabolites using micellar electrokinetic chromatography

Determination of melatonin (MT) (N-acetyl-5-methoxytryptamine) and related indole compounds using standard capillary electrophoresis (CE) system with UV detection was investigated. Satisfactory separations of six analytes i.e. l-tryptophan (l-TRP), 5-methoxyindoleacetic acid (5-MIAA), 6-hydroxymelatonin (6-HMT), MT, serotonin (SER) and 5-methoxytryptamine (5-MTRA) were performed employing micellar electrokinetic chromatography (MEKC). The optimal background electrolytes (BGE) used for separations were 20mM tetraborate buffer (pH 9.2) and 20mM phosphate buffer (pH 3.3) when employing techniques with normal and reverse migration of micelles, respectively. Fifty millimolar sodium dodecyl sulfate (SDS) was employed as the pseudostationary phase and voltage of +/-20kV was used throughout the investigation. On-line preconcentration techniques, stacking and sweeping, were applied in order to overcome high detection limits that are a serious drawback of CE with UV detection. A comparison of used techniques, concerning enhancement factors and limits of detection (LOD), is presented. Obtained results show that the use of stacking with reverse migrating micelles (SRMM) as one of preconcentration techniques allows obtaining the lowest estimated LODs for MT at the level of 30ng/mL with injection time of 99s at 0.5psi. Estimated LODs for other analytes in these conditions were, 21, 26 and 100ng/mL for l-TRP, 5-MIAA and 6-HMT, respectively. Signals of 5-MTRA and SER obtainable only with 10s injection allowed reaching estimated LODs of 62.5 and 130ng/mL, respectively. Analysis of spiked, diluted human serum was carried out as a preliminary application illustration of developed procedure.

Optimization of the separation of flavonoids using solvent-modified micellar electrokinetic chromatography

In this work the separation of eighteen flavonoids was attempted using reduced-flow micellar elektrokinetic chromatography (RF-MEKC) electrolytes modified by selected solvents with differing properties: methanol (MeOH), acetonitrile (ACN) and tetrahydrofuran (THF). Structural aspects such as unsaturation of the C ring, number and position of OH groups, methylation and glycosylation as well as solvent effects and their impact on the electrophoretic behavior of flavonoids were addressed. By evaluating the electropherograms obtained from mixture-designed electrolytes and searching for changes in the critical pairs, a favorable separation condition was achieved using 20 mmol/L phosphate buffer at pH 2.5 containing 50 mmol/L sodium dodecyl sulfate (SDS), 15% ACN and 5% THF (one critical pair) in less than 12 min with 1.5% coefficient of variation (CV) for retention factor and 3% CV for peak area (n = 5). The applicability of the proposed separation condition was demonstrated by the inspection of flavonoids in herbal extracts of Neem.

Verification of statistical-overlap theory in micellar electrokinetic chromatography

The limited peak capacity of neutral compounds in micellar electrokinetic chromatography (MEKC) causes peak overlap in a simple 38-compound sample that is predicted by statistical-overlap theory (SOT). The low-concentration sample was prepared in-house from several compound classes to span the entire migration-time range and was resolved partially in a pH=7 phosphate buffer containing 50 mM sodium dodecyl sulfate. Peaks, singlets, doublets, and other multiplets were identified on the basis of known migration times and were counted at 13 voltages spanning 4 - 26 kV. These numbers agreed well with predictions of a simple SOT based on the assumption of an inhomogeneous Poisson distribution of migration times. Because the dispersion theory of MEKC is simple, the standard deviations of single-component peaks were modeled theoretically. As part of a new way to implement SOT, probability distributions of the numbers of peaks, singlets, and so on, were computed by Monte Carlo simulation. These distributions contain all theoretical information on peak multiplicity predictable by SOT and were used to evaluate the agreement between experiment and theory. The peak capacity of MEKC was calculated numerically and substituted into the simplest equations in SOT, affirming that peak overlap arises from limited peak capacity.

Dual injection capillary electrophoresis: Foundations and applications

The state of the art of capillary electrophoresis (CE) approaches based on dual injection is here reported. Dual injection strategies have been proposed with three main objectives: (i) to provide information about reaction kinetics and/or related parameters, (ii) to perform in-capillary derivatization for improving separation and/or determination, (iii) to develop electrophoretic methods for the simultaneous analysis of anionic and cationic compounds. For the first two purposes, dual injection, which involves sample and reagent, can be realized either from the same end of the capillary (electrophoretically mediated microanalysis, EMMA) or from the two ends of the capillary (electroinjection analysis, EIA). The third objective, with dual injection of sample from the two ends of the capillary, takes advantage of moving cationic and anionic compounds with opposite directions. The foundations of each alternative, conditions necessary for working with them, restrictions, applications as well as perspectives are reviewed in order to establish the advantages, shortcomings, and convenience or no of their use in comparison to conventional CE.

Determination and regulation of the migration window in electrokinetic chromatography

The determination of the velocities of the mobile and the pseudostationary phases (the migration (time) window) is mandatory for the determination of physicochemical properties by electrokinetic chromatography (EKC). This review offers a detailed discussion on the definition, the importance, the determination and the regulation of the migration (time) window in EKC. An overview on the theoretical treatment of chromatographic processes in EKC is given defining EKC in comparison to the term capillary electrophoresis. Methods to determine and influence the migration window are discussed with emphasis on measures that have been taken to modify the electroosmotic flow velocity. Pseudostationary phases (or separation carriers) that are taken into consideration are anionic and cationic micelles, mixed micelles, microdroplets (microemulsions), polymeric pseudostationary phases and dendrimers.

Comprehensive strategy for chiral separations using sulfated cyclodextrins in capillary electrophoresis

This review focuses on the emerging role of sulfated cyclodextrins in the capillary electrophoretic (CE) separation of chiral analytes. Since being introduced as enantioselective agents for CE in 1995, these anionic additives have continued to demonstrate remarkable application universality. The broad spectrum of chiral compounds successfully separated using this approach includes acidic, basic, neutral, and zwitterionic species. This impressive array of analyte structures is derived from a growing diversity of compound classes including pharmaceuticals, plant extracts, biomarkers, herbicides, alkaloids, fungicides, and metal ions. Moreover, literature reports highlight the minimal optimization required to achieve a successful separation. Based on these findings, sulfated cyclodextrins appear to be well suited for the development of a more universal, comprehensive separation strategy for chiral compounds. This review explores this proposition by beginning with the structure and migration properties of sulfated cyclodextrins, using applications to highlight the separating power of this technique and ending with a pragmatic, comprehensive separation strategy.

Migration behavior of alkylphenols, bisphenol A and bisphenol S studied by capillary electrophoresis using sulfated beta-cyclodextrin

An application of capillary electrophoresis (CE) using sulfated beta-cyclodextrin (SCD) has been investigated for separating alkylphenols with different chain lengths, as well as bisphenol A and bisphenol S. In the absence of SCD in running buffer, all the phenols migrated at the same velocity as the electroosmotic flow (EOF), whereas the addition of SCD effectively led to the baseline separation of alkylphenols on the basis of the difference in the abilities to bind into the hydrophobic cavity of CD. The host-guest binding constants between analyte phenols and SCD were evaluated from Benesi-Hildebrand plots of the data obtained by two independent methods, CE and UV-visible measurements, demonstrating that the greater the hydrophobicity of the phenols, the larger the binding constants. The effects of organic solvents on the resolution for alkylphenols and bisphenols were also examined. This system using SCD was effective for the separation of 4-octylphenol and 4-nonylphenol isomers having longer alkyl chains.

Chemometric modeling of neurotransmitter amino acid separation in normal and reversed migration micellar electrokinetic chromatography

A chemometric experimental design has been applied for the optimization of neurotransmitter amino acid separation in capillary electrophoresis. The optimizations were carried out for normal micellar electrokinetic chromatography (N-MEKC) and reversed migration micellar electrokinetic chromatography (RM-MEKC). In order to optimize three separation factors and study the interaction between factors, a response function was optimized via searching its optimum (minimum/maximum). For this purpose a central composite design with multivariate linear regression (MLR) analysis was utilized. Modeling with good regression coefficients from the MLR adequately described the interaction of factors such as background electrolyte and sodium dodecylsulfate concentrations which had a large impact on selectivity and migration behaviors. Similar optimal conditions regarding resolution and number of theoretical plates but different retention behaviors as a function of background electrolyte and micellar concentrations were observed for N-MEKC and RM-MEKC. Improved overall performance from the RM-MEKC separation of five neurotransmitter acids, superior to N-MEKC, is demonstrated in terms of repeatability, peak symmetry, sensitivity, and in particular, impurity determination in an overloaded separation system.

Determination of carbamazepine and carbamazepine-10,11-epoxide in human serum and plasma by micellar electrokinetic capillary chromatography in the absence of electroosmosis

Therapeutic drug monitoring of carbamazepine (CBZ), a widely used antiepileptic drug, is required for optimization of pharmacotherapy with this drug and for assessment of the patient's compliance to therapy. The suitability of employing micellar electrokinetic capillary chromatography (MEKC) in the absence of electroosmosis for the determination of CBZ and its main metabolite carbamazepine-10,11-epoxide (CBZE) in extracts of human serum and plasma is reported. Using micelles formed by dodecyl sulfate, analyses performed in untreated fused-silica capillaries at acidic pH and in commercially available coated capillaries under application of reversed polarity are compared. Uncoated and polyvinyl alcohol coated capillaries proved to be unsuitable for this purpose, whereas capillaries coated with linear polyacrylamide and N-acryloylaminoethoxyethanol and operated at pH 7.6 are shown to provide high-quality and reliable data on a short time scale. Assay performance is discussed via statistical analysis of the data produced from a set of quality control sera that contain up to 14 different drugs and via analysis of patient samples. Intraday and interday imprecision data for concentrations between 4.0 and 84 microM are demonstrated to be < 10%. Run times are shown to be < 50% compared to those observed in conventional MEKC at alkaline pH (i.e., in the presence of electroosmosis).

Interaction of surfactants with homologous series of peptides studied by reversed-phase thin-layer chromatography

The relative strength of interaction between anionic (SDS) and nonionic surfactant (octaethoxylated oleyl alcohol, GEN) and homologous series of peptides was determined by reversed-phase thin-layer chromatography (RP-TLC) carried out on alumina layers impregnated with paraffin oil. The relative strength of interaction was calculated and was correlated with the physicochemical parameters of peptides. It was established that each peptide interacted with both surfactants and with their mixture (1:1, m/m). The relative strength of interaction depended on the number of amino acid units in the peptide, side chain bulk and electronic properties and hydrophobicity of the amino acids. The impact of individual parameters highly depended on the character of surfactant. The data prove that the retention order of peptides can be modified by adding different surfactants and surfactant mixtures to the mobile phase resulting in improved separation.

Recent innovations in the use of charged cyclodextrins in capillary electrophoresis for chiral separations in pharmaceutical analysis

A review is presented on the use of charged cyclodextrins (CDs) as chiral selectors in capillary electrophoresis (CE) for the separation of analytes in pharmaceutical analysis. An overview is given of theoretical models that have been developed for a better prediction of the enantiomeric resolution and for a better understanding of the separation mechanism. Several types of charged CDs have been used in chiral capillary electrophoretic separation (anionic, cationic, and amphoteric CDs). Especially the anionic CDs seem to be valuable due to the fact that many pharmaceutically interesting compounds can easily be protonated (e.g., amine groups). For that reason several anionic CDs are now commercially available. Cationic and amphoteric CDs are less common in chiral analysis and only a few are commercially available. Attention is paid to the most common synthesis routes and the characterization of the CDs used in chiral capillary electrophoretic separations. The degree of substitution in the synthesized CDs may vary from one manufacturer to another or even from batch to batch, which may have a detrimental effect on the reproducibility and ruggedness of the separation system. In Sections 4, 5, and 6 the applications of anionic, cationic, and amphoteric CDs for the chiral separation in CE are described. Many interesting examples are shown and the influence of important parameters on the enantioselectivity is discussed.

Enantiomeric separation by capillary electrochromatography. I. Chiral separation of dansyl amino acids and organochlorine pesticides on a diol-silica dynamically coated with hydroxypropyl-beta-cyclodextrin

In this work, a commercially available diol-silica stationary phase was converted in situ to a chiral stationary phase by dynamically coating it with hydroxypropyl-beta-cyclodextrin (HP-beta-CD). This stationary phase was shown useful for the capillary electrochromatography (CEC) separation of neutral and anionic enantiomers such as some organochlorine pesticides and dansyl amino acids, respectively. The inclusion of HP-beta-CD in the mobile phase to produce the in situ chiral stationary phase allowed the rapid separation of the anionic dansyl amino acid enantiomers at relatively low electroosmotic flow (EOF). The formation of host-guest complexes between the dansyl amino acids and the neutral HP-beta-CD in the mobile phase lowered the actual charge-to-mass ratios of the anionic solutes, thus speeding up their transport by the EOF across the packed capillary column. Several parameters affecting enantioseparation were investigated, including the concentration of HP-beta-CD, ionic strength, pH, and organic modifier content of the mobile phase.

Proceedings of the 10th Annual Frederick Conference on Capillary Electrophoresis. Frederick, Maryland, USA. October 18-20, 1999

Since the introduction of the first commercial capillary electrophoresis (CE) instrument a decade ago, CE applications have become widespread. Today, CE is a versatile analytical technique which is successfully used for the separation of small ions, neutral molecules, and large biomolecules and for the study of physicochemical parameters. It is being utilized in widely different fields, such as analytical chemistry, forensic chemistry, clinical chemistry, organic chemistry, natural products, pharmaceutical industry, chiral separations, molecular biology, and others. It is not only used as a separation technique but to answer physicochemical questions. In this review, we will discuss different modes of CE such as capillary zone electrophoresis, micellar electrokinetic chromatography, capillary gel electrophoresis, capillary isoelectric focusing, and capillary electrochromatography, and will comment on the future direction of CE, including array capillary electrophoresis and array microchip separations.

Dual-opposite injection electrokinetic chromatography for the unbiased, simultaneous separation of cationic and anionic compounds

The concept of dual opposite injection in capillary electrophoresis (DOI-CE) for the simultaneous separation, under conditions of suppressed electroosmotic flow, of anionic and cationic compounds with no bias in resolution and analysis time, is extended to a higher pH range in a zone electrophoresis mode (DOI-CZE). A new DOI-CE separation mode based on electrokinetic chromatography is also introduced (DOI-EKC). Whereas conventional CZE and DOI-CZE are limited to the separation of charged compounds with different electrophoretic mobilities, DOI-EKC is shown to be capable of separating compounds with the same or similar electrophoretic mobilities. In contrast to conventional EKC with charged pseudostationary phases that often interact too strongly with analytes of opposite charge, the neutral pseudostationary phases appropriate for DOI-EKC are simultaneously compatible with anionic and cationic compounds. This work describes two buffer additives that dynamically suppress electroosmotic flow (EOF) at a higher pH (6.5) than in a previous study (4.4), thus allowing DOI-CZE of several pharmaceutical bases and weakly acidic positional isomers. Several DOI-EKC systems based on nonionic (10 lauryl ether, Brij 35) or zwitterionic (SB-12, CAS U) micelles, or nonionic vesicles (Brij 30) are examined using a six-component test mixture that is difficult to separate by CZE or DOI-CZE. The effect of electromigration dispersion on peak shape and efficiency, and the effect of surfactant concentration on retention, selectivity, and efficiency are described.

Chiral glycosidic surfactants for enantiomeric separation in capillary electrophoresis

Several glycosidic surfactants (GSs) have been shown useful in the separation of enantiomers by capillary electrophoresis. The virtue of GSs is that they can be used as (i) neutral chiral additives in the running electrolyte for the enantioseparation of charged chiral solutes by capillary zone electrophoresis, (ii) as in situ charged micelles for the enantioseparation of neutral and charged chiral solutes by micellar electrokinetic capillary chromatography (MECC), (iii) as anionic chiral surfactants in the MECC mode upon covalently attaching negatively charged groups to their sugar head groups, and (iv) as neutral and anionic chiral surfactants mixed with achiral micelles (e.g., sodium dodecyl sulfate) for MECC of enantiomers. This review article is to provide a comprehensive description of GSs in the chiral separation of various enantiomers over a wide range of operating conditions.

Overview of capillary electrophoresis and capillary electrochromatography

This paper provides an overview on the current status of capillary electrophoresis (CE) and capillary electrochromatography (CEC). The focus is largely on the current application areas of CE where routine methods are now in place. These application areas include the analysis of DNA, clinical and forensic samples, carbohydrates, inorganic anions and metal ions, pharmaceuticals, enantiomeric species and proteins and peptides. More specific areas such the determination of physical properties, microchip CE and instrumentation developments are also covered. The application, advantages and limitations of CEC are covered. Recent review articles and textbooks are frequently cited to provide readers with a source of information regarding pioneering work and theoretical treatments.

Electrokinetic chromatography

The important features of electrokinetic chromatography are critically reviewed. Special emphasis is given to systems using micelles as pseudostationary phase. Short and comprehensive overviews are given on the subjects of separation, comparison with capillary electrochromatography, on-line coupling with mass spectrometry, and developments that are expected in the future. A greater coverage on the subject of improvement of detection sensitivity, specifically by on-line concentration was also contributed.

Enantioseparations by capillary electrophoresis using chiral glycosidic surfactants. I. Evaluation of cyclohexyl-pentyl-beta-D-maltoside surfactant

Chiral cyclohexyl-pentyl-beta-D-maltoside (CYMAL-5) surfactant was evaluated in the enantioseparation of charged racemic species by capillary electrophoresis. CYMAL-5 is a glycosidic surfactant (GS) with a chiral maltose polar head group and a cyclohexyl-pentyl hydrophobic tail. At concentrations above its critical micellar concentration (CMC), CYMAL-5 produces neutral micelles in aqueous media. The neutral micelles migrate at the velocity of the electroosmotic flow (EOF). As expected, the CYMAL-5 system was only useful for the enantioseparation of charged chiral solutes. The enantioresolution of the CYMAL-5 can be manipulated over a wide range of electrolyte composition, e.g., pH, ionic strength and surfactant concentration. In the presence of EOF, and in all cases, there is an optimum surfactant concentration for maximum enantioresolution, which is located at low surfactant concentration for strongly hydrophobic solutes and at high surfactant concentration for relatively hydrophilic solutes. The presence of an optimum surfactant concentration for maximum enantioresolution is attributed to the EOF. At low pH values where the EOF is negligible, enantioresolution increased with increasing surfactant concentration in the useful concentration range in a way similar to chromatography.

Enantiomeric separations of terbutaline by CE with a sulfated beta-cyclodextrin chiral selector: a quantitative binding study

Sulfated beta-cyclodextrin, a negatively charged chiral selector, was used for the enantiomeric separation of racemic terbutaline by capillary electrophoresis. Chiral separation was found to increase with decreasing cyclodextrin concentration. Host-guest complex binding constants for this system were determined by UV difference spectroscopy (Kav = 1490 M-1) and by CE under conditions of minimal EOF and reversed polarity (K1 = 1730 M-1, K2 = 1590 M-1, alpha = 1.09). The effect of organic modifiers, methanol, and acetonitrile was also studied over a wide range of modifier concentrations. Binding constants decreased while selectivity increased with increasing organic modifier concentration (10% MeOH: K1 = 1590 M-1, K2 = 1130 M-1, alpha = 1.41. 10% ACN: K1 = 1320 M-1, K2 = 870 M-1, alpha = 1.52). Experimental results are discussed in the context of existing separation models.