Determination of bentazon residues in water by high-performance liquid chromatography. Validation of the method

Enhanced fluorescent sensing probe via PbS quantum dots functionalized with gelatin for sensitive determination of toxic bentazon in water samples

Fluorescent chemical sensors to detect materials, by increasing fluorescence emission and absorption or by shutting down, because they are nondestructive, the ability to show decomposed concentrations, fast response, high accuracy have been considered and used. In this research, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for the determination of toxic bentazon (BTZN) one of the most problematic pesticides polluting in water samples, and extremely harmful to humans and animals even at low concentrations. The calibration curve was linear in the range of (0.05 to 200.0 ng mL^-1). The current response was linearly proportional to the BTZN concentration with a R²∼ 0.999. The standard deviation of less than (3%), and detection limits (3S/m) of the method (0.5 ng mL^-1, in time 50 s, 325 nm) were obtained for sensor level response PbS Quantum Dot-Gelatin nanocomposites sensor with (99%) which is below the U.S. Health Advisory level. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the BTZN. The method fluorometric introduced to measure BTZN in water samples was used and can be used for in different intricate matrices, the chemical PbS Quantum Dot-Gelatin nanocomposites sensor made it possible as an excellent sensor with good reproducibility.

Surface modification of coconut shell activated carbon for efficient solid-phase extraction of N-nitrosodimethylamine from water

A practical and cheap methodology in modifying commercial coconut shell activated carbon for solid-phase extraction of N-nitrosodimethylamine in water was developed through an understanding of activated carbon surface chemistry. In comparison with commercial activated carbon, extraction recoveries by activated carbon treated with sulfuric acid decreased by 50%, while those of activated carbon heated at 800°C improved by more than 100%. Acid treatment increased the oxygen content on the carbon's surface. In contrast, heat treatment decreased the surface oxygen content, resulting in a more hydrophobic surface, which favoured adsorption and extraction of N-nitrosodimethylamine. The influence of different activated carbon sizes, amount of modified activated carbon, and pH on the N-nitrosodimethylamine recoveries was assessed and compared with the commercial solid-phase extraction cartridge. The recommended amount of powder activated carbon treated at 800°C was 3 g to yield an optimum recovery of 130%, which was superior to the commercial solid-phase extraction cartridges. The method validation results confirmed the high accuracy, reproducibility, and precision of the method. The study indicated that chemisorption plays a significant role in the adsorption of N-nitrosodimethylamine on activated carbon, and the optimization of its surface chemistry can enhance N-nitrosodimethylamine adsorption/extraction from water.

Oxidative degradation and mineralization of bentazone from water

Bentazone degradation efficiency and mineralization in water solutions using chlorine dioxide treatment were evaluated. Double distilled water and a river water sample spiked with bentazone were studied and compared after chlorine dioxide treatment. Degradation efficiency was determined using high-performance liquid chromatography (HPLC). Daphnia magna toxicity testing and total organic carbon (TOC) analysis were used to ascertain the toxicity of the degraded solutions and mineralization degree. Bentazone degradation products were identified using gas chromatography with a triple quadrupole mass detector (GC-MS-MS). A simple mechanistic scheme for oxidative degradation of bentazone was proposed based on the degradation products that were identified. Decrease in D. magna mortality, high degradation efficiency and partial bentazone mineralization were achieved by waters containing bentazone degradation products, which indicate the formation of less toxic compounds than the parent bentazone and effective removal of bentazone from the waters. Bentazone degraded into four main degradation products. Humic acid from Sava River water influenced bentazone degradation, resulting in a lower degradation efficiency in this matrix (about 10% lower than in distilled water). Chlorine dioxide treatment of water to degrade bentazone is efficient and offers a novel approach in the development of new technology for removal of this herbicide from contaminated water.

Fatal overdose of the herbicide bentazone

A 59-year-old woman who intentionally ingested 100-200 ml Basagran was taken to the hospital with a cardiac arrest 2 days after she had consumed the herbicide. During this period she suffered vomiting, urination and diarrhoea and she was drowsy with a muddled speech. Biological samples obtained at the autopsy were analysed and presence of bentazone, alcohol and an active metabolite of citalopram were detected. Blood concentrations of bentazone, alcohol and desmethyl-citalopram were 625 mg/kg, 0.62 g/l and 0.03 mg/kg, respectively.

Development and validation of a high-performance liquid chromatographic method for the determination of clomazone residues in surface water

A method is described for the determination of clomazone residues in surface water by high-performance liquid chromatography with UV detection. The method involves solid-phase extraction with C18 extraction tubes. Clomazone was separated on a C18 column with a mobile phase of methanol-water (65:35, v/v) at pH 4.0 and a flow-rate of 1.0 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method developed can be used for determination of clomazone in surface water, at the limit of 0.1 mcirog/l set by the European Union drinking water directive, with a 400-fold preconcentration.

Use of solid-phase extraction and high-performance liquid chromatography for the determination of triazine residues in water: validation of the method

A method for determination of some triazine residues in water has been developed. The method involves concentration with C18 solid-phase extraction cartridges followed by high-performance liquid chromatographic analysis using a C18 column with UV detection at 230 nm, a mobile phase of methanol-water (60:40, v/v) at pH 4.6 (phosphoric acid) and a flow-rate of 0.8 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method can be used for determination of atrazine, simazine, cyanazine and ametryn in water, within the international limits of 0.1 microg/l.