Grafting of poly(ethylene oxide) to the surface of polyaniline films through a chlorosulfonation method and the biocompatibility of the modified films

Advancements in modification of membrane materials over membrane separation for biomedical applications-Review

A comprehensive overview of various modifications carried out on polymeric membranes for biomedical applications has been presented in this review paper. In particular, different methods of carrying out these modifications have been discussed. The uniqueness of the review lies in the sense that it discusses the surface modification techniques traversing the timeline from traditionally well-established technologies to emerging new techniques, thus giving an intuitive understanding of the evolution of surface modification techniques over time. A critical comparison of the advantages and pitfalls of commonly used traditional and emerging surface modification techniques have been discussed. The paper also highlights the tuning of specific properties of polymeric membranes that are critical for their increased applications in the biomedical industry specifically in drug delivery, along with current challenges faced and where the future potential of research in the field of surface modification of membranes.

Surface modification and biotribological behavior of UHMWPE nanocomposites with GO infiltrated by ultrasonic induction

In this study, we have innovatively proposed a method for surface modification of ultra-high molecular weight polyethylene (UHMWPE) artificial joint materials with graphene oxide (GO) infiltrated into UHMWPE substrate by ultrasonic induction. The mechanical properties of UHMWPE nanocomposites with GO infiltrated by ultrasonic induction were compared with that of GO mixed. The molecular structure, wettability, peak load, and bio-tribological behavior of GO/UHMWPE nanocomposites were studied using fourier transform infrared spectroscopy, contact angle measuring instrument, electronic universal material testing machine, tribometer, and profilometer, respectively. The results show that the ultrasonic-induction method can make GO adhere to UHMWPE surface well, and GO can significantly improve the wettability of UHMWPE substrate. When the ultrasound-inducted time is up to 12 hr, the wetting angle of the nanocomposites (12 h-GO/UHMWPE) is reduced to 65.24°, which is 20.51% lower than that of the pure UHMWPE. The peak load is 183 N, which is 20.22% higher than that of GO/UHMWPE prepared by the mixing method. The bio-tribological property of UHMWPE nanocomposites with GO infiltrated by ultrasonic induction for 12 hr (12 h-GO/UHMWPE) is the best, and its friction coefficient keeps more stable at a value of 0.0605 under the lubrication of calf serum, which is 11.81% lower than that of UHMWPE mixed with GO by a traditional method, and the wear rate is decreased to 3.25 × 10^-5 mm³ N^-1 m^-1 .

In-Vitro Hemocompatibility of Polyaniline Functionalized by Bioactive Molecules

Hemocompatibility is an essential prerequisite for the application of materials in the field of biomedicine and biosensing. In addition, mixed ionic and electronic conductivity of conducting polymers is an advantageous property for these applications. Heparin-like materials containing sulfate, sulfamic, and carboxylic groups may have an anticoagulation effect. Therefore, sodium dodecylbenzenesulfonate, 2-aminoethane-1-sulfonic acid and N-(2-acetamido)-2-aminoethanesulfonic acid were used for modification of the representative of conducting polymers, polyaniline, and the resulting products were studied in the context of interactions with human blood. The anticoagulation activity was then correlated to surface energy and conductivity of the materials. Results show that anticoagulation activity is highly affected by the presence of suitable functional groups originating from the used heparin-like substances, and by the properties of polyaniline polymer itself.

Interactions Between Biological Products and Product Packaging and Potential Approaches to Overcome Them

Biological products such as protein-based biopharmaceuticals are playing an important role in the healthcare and pharmaceutical industry. The interaction between biological products and packaging materials has become the focus of many studies since it can reduce the effectiveness of biological products. These interactions are heavily influenced by the surface properties and physicochemical nature of the therapeutic agents and the packaging materials. Therefore, it is critical to understand the interactions between packaging materials and biological products in order to design biocompatible packaging materials and develop approaches to minimize adverse interactions. We describe the interactions that occur when using several common packaging materials, including glass and polymer. We discuss the interaction between these materials and biological products such as blood, blood derivatives, recombinant proteins, monoclonal antibodies, and gene therapeutics. We also summarize approaches for overcoming these interactions. Understanding the interactions between biological materials and packaging materials is critical for the development of novel packaging materials that improve the safety of pharmaceutical products.

A critical review on the prospect of polyaniline-grafted biodegradable nanocomposite

Among the various electrically conducting polymers, polyaniline (PANI) has gained attentions due to its unique properties and doping chemistry. A number of electrically conducting biodegradable polymers has been synthesized by incorporating a biodegradable content of cellulose, chitin, chitosan, etc. in the matrix of PANI. The hybrid materials are also employed as photocatalysts, antibacterial agents, sensors, fuel cells and as materials in biomedical applications. Furthermore, these biodegradable and biocompatible conducting polymers are employed in tissue engineering, dental implants and targeted drug delivery. This review presents state of the art of PANI based biodegradable polymers along with their synthesis routes and unique applications in diverse fields. In future, the synthesis of PANI-grafted biodegradable nanocomposite material is expected to open innovative ways for their outstanding applications.

Evaluation of in vitro and in vivo biocompatibility of a myo-inositol hexakisphosphate gelated polyaniline hydrogel in a rat model

Recent advances in understanding the interaction between electricity and cells/biomolecules have generated great interest in developing biocompatible electrically conductive materials. In this study, we investigated the biocompatibility of a myo-inositol hexakisphosphate gelated polyaniline hydrogel using in vitro and in vivo experiments in a rat model. The polyaniline hydrogel was used to coat a polycaprolactone scaffold and was cultured with rat endothelial progenitor cells differentiated from rat adipose-derived stem cells. Compared with the control sample on a pristine polycaprolactone scaffold, the treated polyaniline hydrogel had the same non-poisonous/cytotoxicity grade, enhanced cell adhesion, and a higher cell proliferation/growth rate. In implant studies, the polyaniline hydrogel sample induced milder inflammatory responses than did the control at the same time points. Combining the advantages of a biocompatible hydrogel and an organic conductor, the inositol phosphate-gelated polyaniline hydrogel could be used in bioelectronics applications such as biosensors, neural probes, cell stimulators, medical electrodes, tissue engineering, and electro-controlled drug delivery.

Synthesis of conductive polyaniline-modified polymers via a combination of nitroxide-mediated polymerization and “click chemistry”

A new strategy for graft copolymerization of aniline onto polystyrene by a multi step process is suggested.

Protein adsorption and peroxidation of rat retinas under stimulation of a neural probe coated with polyaniline

For the purpose of investigating the potential use of conducting polymers, i.e. polyaniline (PANi), as electrode coating material for improving the function of neural probes, a PANi-coated platinum (Pt) electrode was prepared by the in situ polymerization method. Protein adsorption was observed by atomic force microscopy/scanning electron microscopy and sodium dodecyl sulfate polyacrylamide gel electrophoresis, as well as quantification. Peroxidation of rat retinas was evaluated by determination of conjugated dienes and PLOOH, which were quantified by UV-visible spectrophotometer and high-performance liquid chromatography. The stability of PANi coating for 6 months was also estimated with an in vitro electrical stimulation system. This revealed that: (1) PANi with regular and compact nanoparticles 20-40 nm in diameter was successfully polymerized on the uncoated platinum electrode surface; (2) the PANi-coated Pt electrode adsorbed fewer retinal fragments and induced less peroxidation than the uncoated platinum electrode; (3) in contrast to the uncoated platinum electrode, the PANi-coated Pt electrode surface tended to aggregate retinal fragments rather than spread them, which may help to reduce inflammation and scar formation in long-term implantation; (4) the PANi coating exhibited excellent properties in terms of the intactness and the stable nanoparticle morphology after 6 months' electrical stimulation, while corrosion occurred on the uncoated platinum electrode after 1 month.

Improved blood compatibility of poly(ethylene terephthalate) films modified with L-arginine

In order to improve the blood compatibility of the commonly used blood-contacting biomaterial poly(ethylene terephthalate) (PET), in this study PET films were chemically modified with L-arginine (L-Arg) by a three-step-procedure using glutaraldehyde (GA) as a cross-linker. The composition and chemical structure of PET and its change with surface modification were examined by X-ray photoelectron spectroscopy (XPS) and attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy, while the change in hydrophilicity was judged by water contact angles measurement. The result of water contact measurement indicated that the modified films became more hydrophilic than PET with the contact angle decreasing from 78.5 degrees for PET to 43.7 degrees for PET-Arg. The protein adsorption on the film surface was evaluated by bicinchoninic acid assay (BCA) method, and the result showed that the L-Arg-modified films decreased the amount of protein adsorption by about 25%. The in vitro blood compatibility such as platelet adhesion (observed by scanning electron microscopy) and thrombus formation was also investigated, and the results demonstrated that the L-Arg-modified films significantly suppressed platelet adhesion and aggregation and reduced the thrombus formation by about 67% compared with PET.

Effect of poly(ethylene oxide) on the release behaviors of poly(ɛ-caprolactone) microcapsules containing erythromycin

The biodegradable poly(epsilon-caprolactone) (PCL)/poly(ethylene oxide) (PEO) microcapsules and the analyzing of form and features for the manufacturing conditions were investigated in a prospective drug delivery systems (DDS) through drug release. The effects of emulsifier, emulsifier concentration, and stirring rate on the diameter and form of the microcapsules were examined using image analyzer (IA) and scanning electron microscope (SEM). The role of interfacial adhesion between PCL/PEO and drug was determined by contact angle measurements, and the drug release rate of the microcapsules was characterized by UV-vis spectroscopy. As a result, the microcapsules were made in spherical forms with a mean particle size of 170 nm approximately 68 microm. And the work of adhesion between water and PCL/PEO was increased with increasing the PEO content, which is due to higher hydrophilicity of PEO. The drug release rate of the microcapsules was significantly increased as the PEO content increased, which could be attributed to the increasing of the hydrophilic groups or the degree of adhesion at the interfaces.

Surface modification and functionalization through the self-assembled monolayer and graft polymerization

The modification of a surface at the molecular level with precise control of the building blocks generates an integrated molecular system. This field has progressed rapidly in recent years through the use of self-assembled monolayer (SAM) interfaces. Recent developments on surface-initiated chemical reactions, functionalization, and graft polymerization on SAM interfaces are emphasized in the present review. A number of surface modifications by grafting are reviewed. The grafting of polyaniline on a glass surface, previously modified with a silane self-assembled monolayer (SAM), is examined in detail for both planar and 3-D systems, such as fibers, nanoparticles, and even polymer patterned surfaces. We also discuss the graft polymerization of water-soluble polymers on the surface of silicon nanoparticles, which generate stable aqueous colloidal solutions and have numerous applications. Finally, we compare and review some surface-modification techniques on the surfaces of polymers, such as two-solvent entrapment, polymer blending, and chemical grafting, which improve their biocompatibility.