Ions and solvent transport across conducting polymers investigated by ac electrogravimetry. Application to polyaniline

Research Trends in the Use of Polyaniline Membrane for Water Treatment Applications: A Scientometric Analysis

Polyaniline (PANI), which is a member of the family of electrically conducting polymers, has been widely discussed as a potential membrane for wastewater treatment. Although a steady growth in PANI literature was observed, analyzing PANI literature quantitatively is still a novelty. The main aim of this study is to unearth the current research status, global trends, and evolution of PANI membranes literature and their use in water treatment applications over time. For this purpose, a scientometric study was performed consisting of bibliometric and bibliographic analysis. A total of 613 entities were extracted from Web of Science published during the last 50 years and were analyzed to map trends based on leading peer-reviewed journals, publication records, leading research disciplines, countries, and organizations. The study shows that the number of annual publications increased exponentially from 2005 to 2020 and is expected to keep increasing in the current decade. The Journal of Membrane Science published the highest number of articles and was identified as the most-cited journal in the field. China, India, and the USA were observed as the top three research hubs. The top-ranked authors in the field were Wang, Jixiao, and Wang, Zhi. To find research trends, four different clusters of keywords were generated and analyzed. The top five most frequent keywords turn out to be polyaniline, water, performance, membranes, and nanoparticles. The analysis suggests that the application of nanotechnology for modifying PANI membranes (using nanoparticles, nanotubes, and graphene specifically) is the future of this field. This study elucidates the research streamline of the field that may serve as a quick reference for early career researchers and industries exploring this field.

Elucidating the Origin of the Electrochemical Capacity in a Proton-Based Battery HxIrO4 via Advanced Electrogravimetry

Recently, because of sustainability issues dictated by societal demands, more importance has been given to aqueous systems and especially to proton-based batteries. However, the mechanisms behind the processes leading to energy storage in such systems are still not elucidated. Under this scope, our study is structured on the selection of a model electrode material, the protonic phase H_xIrO₄, and the scrutiny of the interfacial processes through suitable analytical tools. Herein, we employed operando electrochemical quartz crystal microbalance (EQCM) combined with electrochemical impedance spectroscopy (EIS) to provide new insights into the mechanism intervening at the electrode-electrolyte interface. First, we demonstrated that not only the surface or near surface but the whole particle participates in the cationic redox process. Second, we proved that the contribution of the proton on the overall potential window together with the incorporation of water at low potentials solely. This is explained by the fact that water molecules permit a further insertion of protons in the material by shielding the proton charge but at the expense of the proton kinetic properties. These findings shed a new light on the importance of water molecules in the ion-insertion mechanisms taking place at the electrode-electrolyte interface of aqueous proton-based batteries. Overall, the present results further highlight the richness of the EQCM-based methods for the battery field in offering mechanistic insights that are crucial for the understanding of interfaces and charge storage in insertion compounds.

Nanoporous carbon for electrochemical capacitive energy storage

This review summarizes the recent advances of nanoporous carbon materials in the application of EDLCs, including a better understanding of the charge storage mechanisms by combining the advanced techniques and simulations methods.

Bacteria counting method based on polyaniline/bacteria thin film

A simple and rapid bacteria counting method based on polyaniline (PANI)/bacteria thin film was proposed. Since the negative effects of immobilized bacteria on the deposition of PANI on glass carbon electrode (GCE), PANI/bacteria thin films containing decreased amount of PANI would be obtained when increasing the bacteria concentration. The prepared PANI/bacteria film was characterized with cyclic voltammetry (CV) technique to provide quantitative index for the determination of the bacteria count, and electrochemical impedance spectroscopy (EIS) was also performed to further investigate the difference in the PANI/bacteria films. Good linear relationship of the peak currents of the CVs and the log total count of bacteria (Bacillus subtilis) could be established using the equation Y=-30.413X+272.560 (R(2)=0.982) over the range of 5.3×10(4) to 5.3×10(8)CFUmL(-1), which also showed acceptable stability, reproducibility and switchable ability. The proposed method was feasible for simple and rapid counting of bacteria.

Oscillatory Changes of the Heterogeneous Reactive Layer Detected with the Motional Resistance during the Galvanostatic Deposition of Copper in Sulfuric Solution

Metallic copper was galvanostatically deposited on quartz|gold resonant electrodes by applying a constant current in a 0.5 M CuSO4/0.1 M H2SO4 aqueous solution. Galvanostatic copper deposition is one of the best methodologies to calibrate the electrochemical quartz crystal microbalances (EQCM), a gravimetric sensor to evaluate changes in mass during the electrochemical reactions through the Sauerbrey equation. The simultaneous measurement of mass, current density, and motional resistance by an EQCM with motional resistance monitoring allows us to characterize the processes occurring on the electrode surface and at the interfacial regions with unprecedented detail. During the galvanostatic copper deposition, Cu(H2O)4(OH)2 is accumulated close to the copper surface, generating a passive layer. This passive layer can act as Cu(2+) reservoir for the Cu(2+) → Cu process since the copper deposition is not affected. The analysis of motional resistance evolution in different experimental conditions reveals that the passive layer is formed by the reaction of oxidizing agents generated at the counter electrode with the metallic copper surface. The simplistic Cu(2+) → Cu process is completed with a more detailed mechanism, which includes the passive layer formation/dissolution and the transport of species from the counter electrode surface (Pt) to the working electrode surface. The results further support the calibration procedure of EQCM by the galvanostatic deposition of copper in sulfuric solutions. However, we suggest applying high current densities, separating the counter electrode and quartz|gold resonant electrode about 0.5 cm, and keeping oxygen in solution for the EQCM calibration. Moreover, the better interval time to calculate the Sauerbrey's constant from charge and resonant frequency data is between 150 and 300 s.

Exchanged cations and water during reactions in polypyrrole macroions from artificial muscles

The movement of the bilayer (polypyrrole-dodecylbenzenesulfonate/tape) during artificial muscle bending under flow of current square waves was studied in aqueous solutions of chloride salts. During current flow, polypyrrole redox reactions result in variations in the volumes of the films and macroscopic bending: swelling by reduction with expulsion of cations and shrinking by oxidation with the insertion of cations. The described angles follow a linear function, different in each of the studied salts, of the consumed charge: they are faradaic polymeric muscles. The linearity indicates that cations are the only exchanged ions in the studied potential range. By flow of the same specific charge in every electrolyte, different angles were described by the muscle. The charge and the angle allow the number and volume of both the exchanged cations and the water molecules (related to a reference) between the film to be determined, in addition to the electrolyte per unit of charge during the driving reaction. The attained apparent solvation numbers for the exchanged cations were: 0.8, 0.7, 0.6, 0.5, 0.5, 0.4, 0.25, and 0.0 for Na(+), Mg(2+), La(3+), Li(+), Ca(2+), K(+), Rb(+), and Cs(+), respectively.

Polypyrrole–para-phenolsulfonic acid/tape artificial muscle as a tool to clarify biomimetic driven reactions and ionic exchanges

Driven reactions, complex ionic exchanges and structural changes are clarified by bending bilayer muscles and corroborated by EDX analysis.

Redox switching of heteropolyanions entrapped in polypyrrole films investigated by ac electrogravimetry

In this work, the global kinetics and the exchange of protons and free solvent at the film/electrolyte interface were investigated when a PPy film doped with HPA (heteropolyanions) is polarized. The ionic and electronic transfers for the PPy-HPA system are fast because the determined values of the resistances are relatively low (a few ohms). Depending on the applied potential, the global kinetics is controlled by both the ionic and electronic transfers. The transport effects were neglected here because the prepared films were very thin. Protons play an important role in charge compensation whatever the imposed potential on the PPy-HPA film. This phenomenon results from the acidic-basic properties of the SiMo(12)O(40)(4-) reduced species. A small quantity of water was also shown to be involved in the film reaction process.