Lysyl-tRNA synthetase from Bacillus stearothermophilus: the Trp314 residue is shielded in a non-polar environment and is responsible for the fluorescence changes observed in the amino acid activation reaction

Comparison of the stability of CYP105A1 and its variants engineered for production of active forms of vitamin D

CYP105A1 from Streptomyces griseolus converts vitamin D3 to its biologically active form, 1α,25-dihydroxy vitamin D3. R73A/R84A mutation enhanced the 1α- and 25-hydroxylation activity for vitamin D3, while M239A mutation generated the 1α-hydroxylation activity for vitamin D2. In this study, the stability of six CYP105A1 enzymes, including 5 variants (R73A/R84A, M239A, R73A/R84A/M239A (=TriA), TriA/E90A, and TriA/E90D), was examined. Circular dichroism analysis revealed that M239A markedly reduces the enzyme stability. Protein fluorescence analysis disclosed that these mutations, especially M239A, induce large changes in the local conformation around Trp residues. Strong stabilizing effect of glycerol was observed. Nondenaturing PAGE analysis showed that CYP105A1 enzymes are prone to self-association. Fluorescence analysis using a hydrophobic probe 8-anilino-1-naphthalenesulfonic acid suggested that M239A mutation enhances self-association and that E90A and E90D mutations, in cooperation with M239A, accelerate self-association with little effect on the stability.

Putting amino acids onto tRNAs: The aminoacyl-tRNA synthetases as catalysts

In this chapter we consider the catalytic approaches used by aminoacyl-tRNA synthetase (AARS) enzymes to synthesize aminoacyl-tRNA from cognate amino acid and tRNA. This ligase reaction proceeds through an activated aminoacyl-adenylate (aa-AMP). Common themes among AARSs include use of induced fit to drive catalysis and transition state stabilization by class-conserved sequence and structure motifs. Active site metal ions contribute to the amino acid activation step, while amino acid transfer to tRNA is generally a substrate-assisted concerted mechanism. A distinction between classes is the rate-limiting step for aminoacylation. We present some examples for each aspect of aminoacylation catalysis, including the experimental approaches developed to address questions of AARS chemistry.

Functional attributes of evolutionary conserved Arg45 of Wolbachia (Brugia malayi) translation initiation factor-1

AIM

Wolbachia is a promising antifilarial chemotherapeutic target. Translation initiation factor-1 (Tl IF-1) is an essential factor in prokaryotes. Functional characterization of Wolbachia's novel proteins/enzymes is necessary for the development of adulticidal drugs.

MATERIALS & METHODS

Mutant, Wol Tl IF-1 R45D was constructed by site directed mutagenesis. Fluorimetry and size exclusion chromatography were used to determine the biophysical characteristics. Mobility shift assay and fluorescence resonance energy transfer were used to investigate the functional aspect of Wol Tl IF-1 with its mutant.

RESULTS

Both wild and mutant were in monomeric native conformations. Wild exhibits nonspecific binding with ssRNA/ssDNA fragments under electrostatic conditions and showed annealing and displacement of RNA strands in comparison to mutant.

CONCLUSION

Point mutation impaired RNA chaperone activity of the mutant and its interaction with nucleotides.

Two crystal structures of lysyl-tRNA synthetase from Bacillus stearothermophilus in complex with lysyladenylate-like compounds: insights into the irreversible formation of the enzyme-bound adenylate of L-lysine hydroxamate

Aminoacyl-tRNA synthetase forms an enzyme-bound intermediate, aminoacyladenylate in the amino-acid activation reaction. This reaction is monitored by measuring the ATP-PPi exchange reason in which [(32)P]PPi is incorporated into ATP. We previously reported that L-lysine hydroxamate completely inhibited the L-lysine-dependent ATP-PPi exchange reaction catalysed by lysyl-tRNA synthetase from Bacillus stearothermophilus (BsLysRS). Several experiments suggested that BsLysRS can adenylate L-lysine hydroxamate, but the enzyme-bound lysyladenylate-like compound does not undergo the nucleophilic attack of PPi. This contrasts with the two reports for seryl-tRNA synthetase (SerRS): (i) L-serine hydroxamate was utilized by yeast SerRS as a substrate in the ATP-PPi exchange; and (ii) a seryladenylate-like compound was formed from L-serine hydroxamate in the crystal structure of Thermus thermophilus SerRS. To gain clues about the mechanistic difference, we have determined the crystal structures of two complexes of BsLysRS with the adenylate of L-lysine hydroxamate and with 5'-O-[N-(L-Lysyl)sulphamoyl] adenosine. The comparisons of the two BsLysRS structures and the above SerRS structure revealed the specific side-chain shift of Glu411 of BsLysRS in the complex with the adenylate of L-lysine hydroxamate. In support of other structural comparisons, the result suggested that Glu411 plays a key role in the arrangement of PPi for the nucleophilic attack.

Identifying residues in antigenic determinants by chemical modification

Chemical modification of the side chains of amino acid residues was one of the first methods developed to investigate epitopes in protein antigens. The principle of the method is that alteration of the structure of a key residue of an epitope by a chemical modification will alter reactivity with antibody by affecting either specificity or avidity or both. Chemical modification has the advantage that it can be applied to discontinuous as well as continuous epitopes and may be of value in identifying cryptic epitopes. We consider here the several recent studies that have applied site-specific chemical modification to the identification of epitopes on antigens, including the use of formaldehyde, glutaraldehyde, and acid anhydrides, to produce allergoids where determinants important to reaction with IgE are modified but the ability to elicit an IgG response is retained. It is noteworthy that modification of amino groups with charge reversal appears to be the most useful approach. The approach to the use of site-specific chemical modification as a tool for the study of protein function is discussed, and emphasis is placed on the necessity to (1) validate the specificity of modification and (2) assess potential conformational change that may occur secondary to modification. Finally, a list of chemical reagents used for protein modification is presented, together with properties and references to use.

Ammonium Scanning in an Enzyme Active Site

D-amino acids are largely excluded from protein synthesis, yet they are of great interest in biotechnology. Aspartyl-tRNA synthetase (AspRS) can misacylate tRNA(Asp) with D-aspartate instead of its usual substrate, L-Asp. We investigate how the preference for L-Asp arises, using molecular dynamics simulations. Asp presents a special problem, having pseudosymmetry broken only by its ammonium group, and AspRS must protect not only against D-Asp, but against an "inverted" orientation where the two substrate carboxylates are swapped. We compare L-Asp and D-Asp, in both orientations, and succinate, where the ammonium group is removed and the ligand has an additional negative charge. All possible ammonium positions on the ligand are thus scanned, providing information on electrostatic interactions. As controls, we simulate a Q199E mutation, obtaining a reduction in binding free energy in agreement with experiment, and we simulate TyrRS, which can misacylate tRNA(Tyr) with D-Tyr. For both TyrRS and AspRS, we obtain a moderate binding free energy difference DeltaDeltaG between the L- and D-amino acids, in agreement with their known ability to misacylate their tRNAs. In contrast, we predict that AspRS is strongly protected against inverted L-Asp binding. For succinate, kinetic measurements reveal a DeltaDeltaG of over 5 kcal/mol, favoring L-Asp. The simulations show how chiral discriminations arises from the structures, with two AspRS conformations acting in different ways and proton uptake by nearby histidines playing a role. A complex network of charges protects AspRS against most binding errors, making the engineering of its specificity a difficult challenge.

Induced fit and kinetic mechanism of adenylation catalyzed by Escherichia coli threonyl-tRNA synthetase

Threonyl-tRNA synthetase (ThrRS) must discriminate among closely related amino acids to maintain the fidelity of protein synthesis. Here, a pre-steady state kinetic analysis of the ThRS-catalyzed adenylation reaction was carried out by monitoring changes in intrinsic tryptophan fluorescence. Stopped flow fluorimetry for the forward reaction gave a saturable fluorescence quench whose apparent rate increased hyperbolically with ATP concentration, consistent with a two-step mechanism in which rapid substrate binding precedes an isomerization step. From similar experiments, the equilibrium dissociation constants for dissociation of ATP from the E.Thr complex (K(3) = 450 +/- 180 microM) and threonine from the E.ATP complex (K'(4) = 135 microM) and the forward rate constant for adenylation (k(+5) = 29 +/- 4 s(-1)) were determined. A saturable fluorescence increase accompanied the pyrophosphorolysis of the E.Thr - AMP complex, affording the dissociation constant for PP(i) (K(6) = 170 +/- 50 microM) and the reverse rate constant (k(-5) = 47 +/- 4 s(-1)). The longer side chain of beta-hydroxynorvaline increased the apparent dissociation constant (K(4[HNV]) = 6.8 +/- 2.8 mM) with only a small reduction in the forward rate (k'(+5[HNV]) = 20 +/- 3.1 s(-1)). In contrast, two nonproductive substrates, threoninol and the adenylate analogue 5'-O-[N-(L-threonyl)sulfamoyl]adenosine (Thr-AMS), exhibited linear increases in k(app) with ligand concentration, suggesting that their binding is slow relative to isomerization. The proposed mechanism is consistent with steady state kinetic parameters. The role of threonine binding loop residue Trp434 in fluorescence changes was established by mutagenesis. The combined kinetic and molecular genetic analyses presented here support the principle of induced fit in the ThrRS-catalyzed adenylation reaction, in which substrate binding drives conformational changes that orient substrates and active site groups for catalysis.