Conformational changes in the multidrug transporter EmrE associated with substrate binding

Comprehending conformational changes in EmrE, multidrug transporter at different pH: insights from molecular dynamics simulations

EmrE is a small multidrug resistance (SMR) pump of antiparallel topology that confers resistance to a broad range of polyaromatic cations in Escherichia coli. Atomic-level understanding of conformational changes for the selectivity of substrate and transport of a diverse array of drugs through the smallest known efflux pumps is crucial to multi-drug resistance. Therefore, the present study aims to provide insights into conformational changes during the transport through EmrE transporter at different pH. Molecular dynamics simulations have been carried out on the complete structure of EmrE in the absence of substrate. Computational analyses such as secondary structure, principal component, dynamic cross-correlation matrix, and hydrogen bond calculations have been performed. Analysis of MD trajectories in this study revealed pH-dependent interactions that influenced the structural dynamics of EmrE. Notably, at high pH, Glu14 and Tyr60 in both monomers formed electrostatic interactions, while these interactions decreased significantly at a low pH. Interestingly, a kink at helix 3 (H3) and dual open conformation of EmrE at low pH were also observed in contrast to a closed state discerned towards the periplasmic side at high pH. Significant interactions between C-terminal residues and residues at the edge of H1 & Loop1 and H3 & Loop3 were identified, suggesting their role in stabilizing the closed conformation of EmrE at the periplasmic end under high pH conditions. The present study enhances our understanding of EmrE's conformational changes, shedding light on the pH-dependent mechanisms that are likely to impact its function in multi-drug resistance.Communicated by Ramaswamy H. Sarma.

Crystal structures of bacterial small multidrug resistance transporter EmrE in complex with structurally diverse substrates

Proteins from the bacterial small multidrug resistance (SMR) family are proton-coupled exporters of diverse antiseptics and antimicrobials, including polyaromatic cations and quaternary ammonium compounds. The transport mechanism of the Escherichia coli transporter, EmrE, has been studied extensively, but a lack of high-resolution structural information has impeded a structural description of its molecular mechanism. Here, we apply a novel approach, multipurpose crystallization chaperones, to solve several structures of EmrE, including a 2.9 Å structure at low pH without substrate. We report five additional structures in complex with structurally diverse transported substrates, including quaternary phosphonium, quaternary ammonium, and planar polyaromatic compounds. These structures show that binding site tryptophan and glutamate residues adopt different rotamers to conform to disparate structures without requiring major rearrangements of the backbone structure. Structural and functional comparison to Gdx-Clo, an SMR protein that transports a much narrower spectrum of substrates, suggests that in EmrE, a relatively sparse hydrogen bond network among binding site residues permits increased sidechain flexibility.

High-pH structure of EmrE reveals the mechanism of proton-coupled substrate transport

The homo-dimeric bacterial membrane protein EmrE effluxes polyaromatic cationic substrates in a proton-coupled manner to cause multidrug resistance. We recently determined the structure of substrate-bound EmrE in phospholipid bilayers by measuring hundreds of protein-ligand H^N–F distances for a fluorinated substrate, 4-fluoro-tetraphenylphosphonium (F₄-TPP⁺), using solid-state NMR. This structure was solved at low pH where one of the two proton-binding Glu14 residues is protonated. Here, to understand how substrate transport depends on pH, we determine the structure of the EmrE-TPP complex at high pH, where both Glu14 residues are deprotonated. The high-pH complex exhibits an elongated and hydrated binding pocket in which the substrate is similarly exposed to the two sides of the membrane. In contrast, the low-pH complex asymmetrically exposes the substrate to one side of the membrane. These pH-dependent EmrE conformations provide detailed insights into the alternating-access model, and suggest that the high-pH conformation may facilitate proton binding in the presence of the substrate, thus accelerating the conformational change of EmrE to export the substrate.

EmrE transporter effluxes cationic substrates across lipid membranes in a pH-coupled manner. Here, the authors solve the structure of ligand-bound EmrE at high pH by NMR, with insights into the transport mechanism.

Function-Related Dynamics in Multi-Spanning Helical Membrane Proteins Revealed by Solution NMR

A primary biological function of multi-spanning membrane proteins is to transfer information and/or materials through a membrane by changing their conformations. Therefore, particular dynamics of the membrane proteins are tightly associated with their function. The semi-atomic resolution dynamics information revealed by NMR is able to discriminate function-related dynamics from random fluctuations. This review will discuss several studies in which quantitative dynamics information by solution NMR has contributed to revealing the structural basis of the function of multi-spanning membrane proteins, such as ion channels, GPCRs, and transporters.

Structural Insights into Transporter-Mediated Drug Resistance in Infectious Diseases

Infectious diseases present a major threat to public health globally. Pathogens can acquire resistance to anti-infectious agents via several means including transporter-mediated efflux. Typically, multidrug transporters feature spacious, dynamic, and chemically malleable binding sites to aid in the recognition and transport of chemically diverse substrates across cell membranes. Here, we discuss recent structural investigations of multidrug transporters involved in resistance to infectious diseases that belong to the ATP-binding cassette (ABC) superfamily, the major facilitator superfamily (MFS), the drug/metabolite transporter (DMT) superfamily, the multidrug and toxic compound extrusion (MATE) family, the small multidrug resistance (SMR) family, and the resistance-nodulation-division (RND) superfamily. These structural insights provide invaluable information for understanding and combatting multidrug resistance.

Structure and dynamics of the drug-bound bacterial transporter EmrE in lipid bilayers

The dimeric transporter, EmrE, effluxes polyaromatic cationic drugs in a proton-coupled manner to confer multidrug resistance in bacteria. Although the protein is known to adopt an antiparallel asymmetric topology, its high-resolution drug-bound structure is so far unknown, limiting our understanding of the molecular basis of promiscuous transport. Here we report an experimental structure of drug-bound EmrE in phospholipid bilayers, determined using ¹⁹F and ¹H solid-state NMR and a fluorinated substrate, tetra(4-fluorophenyl) phosphonium (F₄-TPP⁺). The drug-binding site, constrained by 214 protein-substrate distances, is dominated by aromatic residues such as W63 and Y60, but is sufficiently spacious for the tetrahedral drug to reorient at physiological temperature. F₄-TPP⁺ lies closer to the proton-binding residue E14 in subunit A than in subunit B, explaining the asymmetric protonation of the protein. The structure gives insight into the molecular mechanism of multidrug recognition by EmrE and establishes the basis for future design of substrate inhibitors to combat antibiotic resistance.

Identification of an Alternating-Access Dynamics Mutant of EmrE with Impaired Transport

Proteins that perform active transport must alternate the access of a binding site, first to one side of a membrane and then to the other, resulting in the transport of bound substrates across the membrane. To better understand this process, we sought to identify mutants of the small multidrug resistance transporter EmrE with reduced rates of alternating access. We performed extensive scanning mutagenesis by changing every amino acid residue to Val, Ala, or Gly, and then screening the drug resistance phenotypes of the resulting mutants. We identified EmrE mutants that had impaired transport activity but retained the ability to bind substrate and further tested their alternating access rates using NMR. Ultimately, we were able to identify a single mutation, S64V, which significantly reduced the rate of alternating access but did not impair substrate binding. Six other transport-impaired mutants did not have reduced alternating access rates, highlighting the importance of other aspects of the transport cycle to achieve drug resistance activity in vivo. To better understand the transport cycle of EmrE, efforts are now underway to determine a high-resolution structure using the S64V mutant identified here.

The C terminus of the bacterial multidrug transporter EmrE couples drug binding to proton release

Ion-coupled transporters must regulate access of ions and substrates into and out of the binding site to actively transport substrates and minimize dissipative leak of ions. Within the single-site alternating access model, competitive substrate binding forms the foundation of ion-coupled antiport. Strict competition between substrates leads to stoichiometric antiport without slippage. However, recent NMR studies of the bacterial multidrug transporter EmrE have demonstrated that this multidrug transporter can simultaneously bind drug and proton, which will affect the transport stoichiometry and efficiency of coupled antiport. Here, we investigated the nature of substrate competition in EmrE using multiple methods to measure proton release upon the addition of saturating concentrations of drug as a function of pH. The resulting proton-release profile confirmed simultaneous binding of drug and proton, but suggested that a residue outside EmrE's Glu-14 binding site may release protons upon drug binding. Using NMR-monitored pH titrations, we trace this drug-induced deprotonation event to His-110, EmrE's C-terminal residue. Further NMR experiments disclosed that the C-terminal tail is strongly coupled to EmrE's drug-binding domain. Consideration of our results alongside those from previous studies of EmrE suggests that this conserved tail participates in secondary gating of EmrE-mediated proton/drug transport, occluding the binding pocket of fully protonated EmrE in the absence of drug to prevent dissipative proton transport.

Multiple frequency saturation pulses reduce CEST acquisition time for quantifying conformational exchange in biomolecules

Exchange between conformational states is required for biomolecular catalysis, allostery, and folding. A variety of NMR experiments have been developed to quantify motional regimes ranging from nanoseconds to seconds. In this work, we describe an approach to speed up the acquisition of chemical exchange saturation transfer (CEST) experiments that are commonly used to probe millisecond to second conformational exchange in proteins and nucleic acids. The standard approach is to obtain CEST datasets through the acquisition of a series of 2D correlation spectra where each experiment utilizes a single saturation frequency to ¹H, ¹⁵N or ¹³C. These pseudo 3D datasets are time consuming to collect and are further lengthened by reduced signal to noise stemming from the long saturation pulse. In this article, we show how usage of a multiple frequency saturation pulse (i.e., MF-CEST) changes the nature of data collection from series to parallel, and thus decreases the total acquisition time by an integer factor corresponding to the number of frequencies in the pulse. We demonstrate the applicability of MF-CEST on a Src homology 2 (SH2) domain from phospholipase Cγ and the secondary active transport protein EmrE as model systems by collecting ¹³C methyl and ¹⁵N backbone datasets. MF-CEST can also be extended to additional sites within proteins and nucleic acids. The only notable drawback of MF-CEST as applied to backbone ¹⁵N experiments occurs when a large chemical shift difference between the major and minor populations is present (typically greater than ~ 8 ppm). In these cases, ambiguity may arise between the chemical shift of the minor population and the multiple frequency saturation pulse. Nevertheless, this drawback does not occur for methyl group MF-CEST experiments or in cases where somewhat smaller chemical shift differences occur are present.

Influence of quaternary cation compound on the size of the Escherichia coli small multidrug resistance protein, EmrE

EmrE is a member of the small multidrug resistance (SMR) protein family in Escherichia coli. It confers resistance to a wide variety of quaternary cation compounds (QCCs) as an efflux transporter driven by the transmembrane proton motive force. We have expressed hexahistidinyl (His₆) – myc epitope tagged EmrE, extracted it from membrane preparations using the detergent n-dodecyl-β-D-maltopyranoside (DDM), and purified it using nickel-affinity chromatography. The size of the EmrE protein, in DDM environment, was then examined in the presence and absence of a range of structurally different QCC ligands that varied in their chemical structure, charge and shape. We used dynamic light scattering and showed that the size and oligomeric state distributions are dependent on the type of QCC. We also followed changes in the Trp fluorescence and determined apparent dissociation constants (K_d). Overall, our in vitro analyses of epitope tagged EmrE demonstrated subtle but significant differences in the size distributions with different QCC ligands bound.

•

Chemical shape of ligand has significant affect on binding.

•

Shape of the ligand affects the multimeric state of EmrE.

•

Binding affinities strongly depend upon the ligand shape.

•

EmrE shows high plasticity of structure to accommodate a wide range of ligands.

The role played by drug efflux pumps in bacterial multidrug resistance

Antimicrobial resistance is a current major challenge in chemotherapy and infection control. The ability of bacterial and eukaryotic cells to recognize and pump toxic compounds from within the cell to the environment before they reach their targets is one of the important mechanisms contributing to this phenomenon. Drug efflux pumps are membrane transport proteins that require energy to export substrates and can be selective for a specific drug or poly-specific that can export multiple structurally diverse drug compounds. These proteins can be classified into seven groups based on protein sequence homology, energy source and overall structure. Extensive studies on efflux proteins have resulted in a wealth of knowledge that has made possible in-depth understanding of the structures and mechanisms of action, substrate profiles, regulation and possible inhibition of many clinically important efflux pumps. This review focuses on describing known families of drug efflux pumps using examples that are well characterized structurally and/or biochemically.

Structural and functional comparison of hexahistidine tagged and untagged forms of small multidrug resistance protein, EmrE

EmrE is a member of the small multidrug resistance (SMR) protein family in Escherichia coli. EmrE confers resistance to a wide variety of quaternary cation compounds (QCCs) as an efflux transporter driven by proton motive force. The purification yield of most membrane proteins are challenging because of difficulties in over expressing, isolating and solubilizing them and the addition of an affinity tag often improves purification. The purpose of this study is to compare the structure and function of hexahistidinyl (His₆) tagged (T-EmrE) and untagged (UT-EmrE) versions of EmrE. In vivo QCC resistance assays determined that T-EmrE demonstrated reduced resistance as compared to UT-EmrE. We isolated EmrE using the two different purification methods, an organic solvent extraction method used to isolate UT-EmrE and nickel affinity chromatography of T-EmrE. All proteins were solubilized in the same buffered n-dodecyl-β-d-maltopyranoside (DDM) detergent and their conformations were examined in the presence/absence of different QCCs. In vitro analysis of protein multimerization using SDS-Tricine PAGE and dynamic light scattering analysis revealed that both proteins predominated as monomers, but the formation of dimers was more constant and uniform in T-EmrE compared to UT-EmrE. The aromatic residue conformations of both proteins indicate that T-EmrE form is more aqueous exposed than UT-EmrE, but UT-EmrE appeared to have a more dynamic environment surrounding its aromatic residues. Using fluorescence to obtain QCC ligand-binding curves indicated that the two forms had differences in dissociation constants (K_d) and maximum specific one-site binding (B_max) values for particular QCCs. In vitro analyses of both proteins demonstrated subtle but significant differences in multimerization and QCC binding. In vivo analysis indicates differences caused by the addition of the tag, we also observed differences in vitro that could be a result of the tag and/or the different purification methods.

•

Untagged and tagged EmrE are compared in same detergent environment.

•

Purification methods leads to differences in multimeric state distributions.

•

Untagged EmrE has a less constrained structure compared to tagged EmrE.

•

Presence of a tag alters substrate binding to EmrE.

A structured loop modulates coupling between the substrate-binding and dimerization domains in the multidrug resistance transporter EmrE

Secondary active transporters undergo large conformational changes to facilitate the efflux of substrates across the lipid bilayer. Among the smallest known transport proteins are members of the small multidrug resistance (SMR) family that are composed of four transmembrane (TM) domains and assemble into dimers. An unanswered question in the SMR field is how the dimerization domain (TM4) is coupled with the substrate-binding chamber (TM1-3). To provide insight for this essential aspect of ion-coupled transport, we carried out a structure-function study on the SMR protein EmrE using solid-state NMR spectroscopy in lipid bilayers and resistance assays in Escherichia coli. The chemical shifts for EmrE were consistent with β-strand secondary structure for the loop connecting TM3 and TM4. Based on these structural results, EmrE mutants were created to ascertain whether a specific loop length and composition were necessary for function. A linker encompassing six extra Gly residues relative to wild-type EmrE failed to give resistance; however, the number of residues in the loop was not the only criterion for a functional efflux pump. Replacement of the central hydrophobic residue with Gly (L83G) also conferred no ethidium resistance phenotype, which supported the conclusion that the structure and length of the loop were both essential for ion-coupled transport. Taken together with a bioinformatics analysis, a structured linker is likely conserved across the SMR family to play an active role in mediating the conformational switch between inward-open and outward-open states necessary for drug efflux. These findings underscore the important role loops can play in mediating efflux.

Functional response of the small multidrug resistance protein EmrE to mutations in transmembrane helix 2

Escherichia coli EmrE is a small multidrug resistance protein encompassing four transmembrane (TM) sequences that oligomerizes to confer resistance to antimicrobials. Here we examined the effects on in vivo protein accumulation and ethidium resistance activity of single residue substitutions at conserved and variable positions in EmrE transmembrane segment 2 (TM2). We found that activity was reduced when conserved residues localized to one TM2 surface were replaced. Our findings suggest that conserved TM2 positions tolerate greater residue diversity than conserved sites in other EmrE TM sequences, potentially reflecting a source of substrate polyspecificity.

EmrE dimerization depends on membrane environment

The small multi-drug resistant (SMR) transporter EmrE functions as a homodimer. Although the small size of EmrE would seem to make it an ideal model system, it can also make it challenging to work with. As a result, a great deal of controversy has surrounded even such basic questions as the oligomeric state. Here we show that the purified protein is a homodimer in isotropic bicelles with a monomer-dimer equilibrium constant (KMD(2D)) of 0.002-0.009mol% for both the substrate-free and substrate-bound states. Thus, the dimer is stabilized in bicelles relative to detergent micelles where the KMD(2D) is only 0.8-0.95mol% (Butler et al. 2004). In dilauroylphosphatidylcholine (DLPC) liposomes KMD(2D) is 0.0005-0.0008mol% based on Förster resonance energy transfer (FRET) measurements, slightly tighter than bicelles. These results emphasize the importance of the lipid membrane in influencing dimer affinity.

Detecting substrates bound to the secondary multidrug efflux pump EmrE by DNP-enhanced solid-state NMR

Escherichia coli EmrE, a homodimeric multidrug antiporter, has been suggested to offer a convenient paradigm for secondary transporters due to its small size. It contains four transmembrane helices and forms a functional dimer. We have probed the specific binding of substrates TPP(+) and MTP(+) to EmrE reconstituted into 1,2-dimyristoyl-sn-glycero-3-phosphocholine liposomes by (31)P MAS NMR. Our NMR data show that both substrates occupy the same binding pocket but also indicate some degree of heterogeneity of the bound ligand population, reflecting the promiscuous nature of ligand binding by multidrug efflux pumps. Direct interaction between (13)C-labeled TPP(+) and key residues within the EmrE dimer has been probed by through-space (13)C-(13)C correlation spectroscopy. This was made possible by the use of solid-state NMR enhanced by dynamic nuclear polarization (DNP) through which a 19-fold signal enhancement was achieved. Our data provide clear evidence for the long assumed direct interaction between substrates such as TPP(+) and the essential residue E14 in transmembrane helix 1. Our work also demonstrates the power of DNP-enhanced solid-state NMR at low temperatures for the study for secondary transporters, which are highly challenging for conventional NMR detection.

In vivo trp scanning of the small multidrug resistance protein EmrE confirms 3D structure models'

The quaternary structure of the homodimeric small multidrug resistance protein EmrE has been studied intensely over the past decade. Structural models derived from both two- and three-dimensional crystals show EmrE as an anti-parallel homodimer. However, the resolution of the structures is rather low and their relevance for the in vivo situation has been questioned. Here, we have challenged the available structural models by a comprehensive in vivo Trp scanning of all four transmembrane helices in EmrE. The results are in close agreement with the degree of lipid exposure of individual residues predicted from coarse-grained molecular dynamics simulations of the anti-parallel dimeric structure obtained by X-ray crystallography, strongly suggesting that the X-ray structure provides a good representation of the active in vivo form of EmrE.

A lipid-dependent link between activity and oligomerization state of the M. tuberculosis SMR protein TBsmr

TBsmr is a secondary active multidrug transporter from Mycobacterium tuberculosis that transports a plethora of compounds including antibiotics and fluorescent dyes. It belongs to the small multidrug resistance (SMR) superfamily and is structurally and functionally related to E. coli EmrE. Of particular importance is the link between protein function, oligomeric state and lipid composition. By freeze fracture EM, we found three different size distributions in three different lipid environments for TBsmr indicating different oligomeric states. The link of these states with protein activity has been probed by fluorescence spectroscopy revealing significant differences. The drug binding site has been probed further by (19)F-MAS NMR through chemical labeling of native cysteine residues showing a water accessible environment in agreement with the alternating access model.

Antiparallel dimers of the small multidrug resistance protein EmrE are more stable than parallel dimers

The bacterial multidrug transporter EmrE is a dual-topology membrane protein and as such is able to insert into the membrane in two opposite orientations. The functional form of EmrE is a homodimer; however, the relative orientation of the subunits in the dimer is under debate. Using EmrE variants with fixed, opposite orientations in the membrane, we now show that, although the proteins are able to form parallel dimers, an antiparallel organization of the subunits in the dimer is preferred. Blue-native PAGE analyses of intact oligomers and disulfide cross-linking demonstrate that in membranes, the proteins form parallel dimers only if no oppositely orientated partner is present. Co-expression of oppositely orientated proteins almost exclusively yields antiparallel dimers. Finally, parallel dimers can be disrupted and converted into antiparallel dimers by heating of detergent-solubilized protein. Importantly, in vivo function is correlated clearly to the presence of antiparallel dimers. Our results suggest that an antiparallel arrangement of the subunits in the dimer is more stable than a parallel organization and likely corresponds to the functional form of the protein.

Membrane protein structure determination by electron crystallography

During the past year, electron crystallography of membrane proteins has provided structural insights into the mechanism of several different transporters and into their interactions with lipid molecules within the bilayer. From a technical perspective there have been important advances in high-throughput screening of crystallization trials and in automated imaging of membrane crystals with the electron microscope. There have also been key developments in software, and in molecular replacement and phase extension methods designed to facilitate the process of structure determination.

Drug efflux by a small multidrug resistance protein is inhibited by a transmembrane peptide

Drug-resistant bacteria use several families of membrane-embedded transporters to remove antibiotics from the cell. One such family is the small multidrug resistance proteins (SMRs) that, because of their relatively small size (ca. 110 residues with four transmembrane [TM] helices), must form (at least) dimers to efflux drugs. Here, we use a Lys-tagged synthetic peptide with exactly the same sequence as TM4 of the full-length SMR Hsmr from Halobacterium salinarum [TM4 sequence: AcA(Sar)(3)-VAGVVGLALIVAGVVVLNVAS-KKK (Sar = N-methylglycine)] to compete with and disrupt the native TM4-TM4 interactions believed to constitute the locus of Hsmr dimerization. Using a cellular efflux assay of the fluorescent SMR substrate ethidium bromide, we determined that bacterial cells containing Hsmr are able to remove cellular ethidium via first-order exponential decay with a rate constant (k) of 10.1 × 10(-3) ± 0.7 × 10(-3) s(-1). Upon treatment of the cells with the TM4 peptide, we observed a saturable ~60% decrease in the efflux rate constant to 3.7 × 10(-3) ± 0.2 × 10(-3) s(-1). In corresponding experiments with control peptides, including scrambled sequences and a sequence with d-chirality, a decrease in ethidium efflux either was not observed or was marginal, likely from nonspecific effects. The designed peptides did not evoke bacterial lysis, indicating that they act via the α-helicity and membrane insertion propensities of the native TM4 helix. Our overall results suggest that this approach could conceivably be used to design hydrophobic peptides for disruption of key TM-TM interactions of membrane proteins and represent a valuable route to the discovery of new therapeutics.

Spectroscopic analysis of small multidrug resistance protein EmrE in the presence of various quaternary cation compounds

Escherichia coli EmrE protein is the archetypical member of the small multidrug resistance protein family in bacteria and confers host resistance to a wide assortment of toxic quaternary cation compounds by secondary active efflux. This protein can form a variety of multimers under various membrane mimetic conditions, and the consensus of most biochemical and biophysical studies indicate that the active form is a dimer. The purpose of this study is to characterize the conformation of organically extracted detergent solubilized EmrE protein known to predominate as monomer yet demonstrates ligand binding ability. Active site EmrE-E14 replacements were also examined as functionally inactive controls for this study. EmrE was solubilized in detergents, sodium dodecyl sulfate (SDS) and dodecyl maltoside (DDM), and protein conformation was examined in the presence of four known quaternary cation compound (QCC) substrates, tetraphenyl phosphonium (TPP), methyl viologen, cetylpyridinium, and ethidium. SDS-Tricine PAGE analysis of both detergent solubilized proteins revealed that DDM-EmrE preparations enhanced the formation of dimer (and in some cases trimer) forms in the presence of all four QCC above 25 QCC:1 EmrE molar ratios. Examination of EmrE and its active site variant tertiary structures in DDM by circular dichroism spectropolarimetry, intrinsic Trp fluorescence quenching and second order derivative ultraviolet absorbance revealed that the variant fails to bind TPP but interacts with all other compounds. The results of this study show that monomeric detergent solubilized EmrE is capable of forming multimeric complexes that are enhanced by chemically diverse QCCs.

Antiparallel EmrE exports drugs by exchanging between asymmetric structures

Small multidrug resistance (SMR) transporters provide an ideal system to study the minimal requirements for active transport. EmrE is an E. coli SMR transporter that exports a broad class of polyaromatic cation substrates, thus conferring resistance to drug compounds matching this chemical description. However, a great deal of controversy has surrounded the topology of the EmrE homodimer. Here we show that asymmetric antiparallel EmrE exchanges between inward- and outward-facing states that are identical except that they have opposite orientation in the membrane. We quantitatively measure the global conformational exchange between these two states for substrate-bound EmrE in bicelles using solution NMR dynamics experiments. FRET reveals that the monomers within each dimer are antiparallel, and paramagnetic relaxation enhancement NMR experiments demonstrate differential water accessibility of the two monomers within each dimer. Our experiments reveal a “dynamic symmetry” that reconciles the asymmetric EmrE structure with the functional symmetry of residues in the active site.

Analyzing conformational changes in the transport cycle of EmrE

The small multidrug resistance transporters represent a unique model system for studying the mechanism of secondary active transport and membrane protein evolution. However, this seemingly simple protein has been highly controversial. Recent studies have provided experimental evidence that EmrE exists as an asymmetric dimer that exchanges between identical inward-facing and outward-facing states. Re-examination of the published literature in light of these findings fills in many details of the microscopic steps in the transport cycle. Future work will need to examine how the symmetry observed in vitro affects EmrE function in the asymmetric environment of its native Escherichia coli membrane.

Modulation of substrate efflux in bacterial small multidrug resistance proteins by mutations at the dimer interface

Bacteria evade the effects of cytotoxic compounds through the efflux activity of membrane-bound transporters such as the small multidrug resistance (SMR) proteins. Consisting typically of ca. 110 residues with four transmembrane (TM) α-helices, crystallographic studies have shown that TM helix 1 (TM1) through TM helix 3 (TM3) of each monomer create a substrate binding "pocket" within the membrane bilayer, while a TM4-TM4 interaction accounts for the primary dimer formation. Previous work from our lab has characterized a highly conserved small-residue heptad motif in the Halobacterium salinarum transporter Hsmr as (90)GLXLIXXGV(98) that lies along the TM4-TM4 dimer interface of SMR proteins as required for function. Focusing on conserved positions 91, 93, 94, and 98, we substituted the naturally occurring Hsmr residue for Ala, Phe, Ile, Leu, Met, and Val at each position in the Hsmr TM4-TM4 interface. Large-residue replacements were studied for their ability to dimerize on SDS-polyacrylamide gels, to bind the cytotoxic compound ethidium bromide, and to confer resistance by efflux. Although the relative activity of mutants did not correlate with dimer strength for all mutants, all functional mutants lay within 10% of dimerization relative to the wild type (WT), suggesting that the optimal dimer strength at TM4 is required for proper efflux. Furthermore, nonfunctional substitutions at the center of the dimerization interface that do not alter dimer strength suggest a dynamic TM4-TM4 "pivot point" that responds to the efflux requirements of different substrates. This functionally critical region represents a potential target for inhibiting the ability of bacteria to evade the effects of cytotoxic compounds.

Spectroscopic analysis of the intrinsic chromophores within small multidrug resistance protein SugE

Small multidrug resistance (SMR) protein family member, SugE, is an integral inner membrane protein that confers host resistance to antiseptic quaternary cation compounds (QCC). SugE studies generally focus on its resistance to limited substrates in comparison to SMR protein EmrE. This study examines the conformational characteristics of SugE protein in two detergents, sodium dodecyl sulphate (SDS) and dodecyl maltoside (DDM), commonly used to study SMR proteins. The influence of cetylpyridinium (CTP) and cetrimide (CET) using SugE aromatic residues (4W, 2Y, 1F) as intrinsic spectroscopic probes was also determined. Organically extracted detergent solubilized Escherichia coli SugE protein was examined by SDS-Tricine PAGE and various spectroscopic techniques. SDS-Tricine PAGE analysis of SugE in either detergent demonstrates the protein predominates as a monomer but also dimerizes in SDS. Far-UV region circular dichroism (CD) analysis determined that the overall α-helix content SugE in SDS and DDM was almost identical and unaltered by QCC. Near-UV region CD, fluorescence, and second-derivative ultraviolet absorption (SDUV) indicated that only DDM-SugE promoted hydrophobic environments for its Trp and Tyr residues that were perturbed by QCC addition. This study identified that only the tertiary structure of SugE protein in DDM is altered by QCC.

Coupling electron cryomicroscopy and X-ray crystallography to understand secondary active transport

In the past few years we have seen an amazing increase in the number of high-resolution structures for secondary transporters determined by X-ray crystallography, while 3D data obtained by electron cryomicroscopy (cryo-EM) from two-dimensional (2D) crystals are only available at medium resolutions of about 6-10A. Despite their superior resolution, it turned out that the description of a molecular mechanism of secondary transport could not solely rely on high-resolution X-ray structures and have to be supplemented with biochemical and spectroscopic data. Moreover, the comparison of X-ray structures and 3D EM maps has proved to be an important tool for validating native conformations of several membrane proteins, especially when functional data contradicted predictions based on a crystal structure. In addition, 3D EM maps are better suited to investigate transporter activation because of the lipidic environment.

Present and future of membrane protein structure determination by electron crystallography

Membrane proteins are critical to cell physiology, playing roles in signaling, trafficking, transport, adhesion, and recognition. Despite their relative abundance in the proteome and their prevalence as targets of therapeutic drugs, structural information about membrane proteins is in short supply. This chapter describes the use of electron crystallography as a tool for determining membrane protein structures. Electron crystallography offers distinct advantages relative to the alternatives of X-ray crystallography and NMR spectroscopy. Namely, membrane proteins are placed in their native membranous environment, which is likely to favor a native conformation and allow changes in conformation in response to physiological ligands. Nevertheless, there are significant logistical challenges in finding appropriate conditions for inducing membrane proteins to form two-dimensional arrays within the membrane and in using electron cryo-microscopy to collect the data required for structure determination. A number of developments are described for high-throughput screening of crystallization trials and for automated imaging of crystals with the electron microscope. These tools are critical for exploring the necessary range of factors governing the crystallization process. There have also been recent software developments to facilitate the process of structure determination. However, further innovations in the algorithms used for processing images and electron diffraction are necessary to improve throughput and to make electron crystallography truly viable as a method for determining atomic structures of membrane proteins.

Multimeric forms of the small multidrug resistance protein EmrE in anionic detergent

Escherichia coli multidrug resistance protein E (EmrE) is a four transmembrane alpha-helix protein, and a member of the small multidrug resistance protein family that confers resistance to a broad range of quaternary cation compounds (QCC) via proton motive force. The multimeric states of EmrE protein during transport or ligand binding are variable and specific to the conditions of study. To explore EmrE multimerization further, EmrE extracted from E. coli membranes was solubilized in anionic detergent, sodium dodecyl sulphate (SDS), at varying protein concentrations. At low concentrations (</=1muM) in SDS-EmrE is monomeric, but upon increasing EmrE concentration, a variety of multimeric states can be observed by SDS-Tricine polyacrylamide gel electrophoresis (PAGE). Addition of the (QCC), tetraphenyl phosphonium (TPP), to SDS-EmrE samples enhanced EmrE multimer formation using SDS-Tricine PAGE. The relative shapes of EmrE multimers in SDS with or without TPP addition were determined by small angle neutron scattering (SANS) analysis and revealed that EmrE dimers altered in conformation depending on the SDS concentration. SANS analysis also revealed that relative shapes of larger EmrE multimers (>/=100nm sizes) altered in the presence of TPP. Circular dichroism spectropolarimetry displayed no differences in secondary structure under the conditions studied. Fluorescence spectroscopy of SDS-EmrE protein demonstrated that aromatic residues, Trp and Tyr, are more susceptible to SDS concentration than TPP addition, but both residues exhibit enhanced quenching at high ligand concentrations. Hence, EmrE forms various multimers in SDS that are influenced by detergent concentration and TPP substrate addition.

The assembly motif of a bacterial small multidrug resistance protein

Multidrug transporters such as the small multidrug resistance (SMR) family of bacterial integral membrane proteins are capable of conferring clinically significant resistance to a variety of common therapeutics. As antiporter proteins of approximately 100 amino acids, SMRs must self-assemble into homo-oligomeric structures for efflux of drug molecules. Oligomerization centered at transmembrane helix four (TM4) has been implicated in SMR assembly, but the full complement of residues required to mediate its self-interaction remains to be characterized. Here, we use Hsmr, the 110-residue SMR family member of the archaebacterium Halobacterium salinarum, to determine the TM4 residue motif required to mediate drug resistance and SMR self-association. Twelve single point mutants that scan the central portion of the TM4 helix (residues 85-104) were constructed and were tested for their ability to confer resistance to the cytotoxic compound ethidium bromide. Six residues were found to be individually essential for drug resistance activity (Gly(90), Leu(91), Leu(93), Ile(94), Gly(97), and Val(98)), defining a minimum activity motif of (90)GLXLIXXGV(98) within TM4. When the propensity of these mutants to dimerize on SDS-PAGE was examined, replacements of all but Ile resulted in approximately 2-fold reduction of dimerization versus the wild-type antiporter. Our work defines a minimum activity motif of (90)GLXLIXXGV(98) within TM4 and suggests that this sequence mediates TM4-based SMR dimerization along a single helix surface, stabilized by a small residue heptad repeat sequence. These TM4-TM4 interactions likely constitute the highest affinity locus for disruption of SMR function by directly targeting its self-assembly mechanism.

An emerging consensus for the structure of EmrE

The archetypical member of the small multidrug-resistance family is EmrE, a multidrug transporter that extrudes toxic polyaromatic cations from the cell coupled to the inward movement of protons down a concentration gradient. The architecture of EmrE was first defined from the analysis of two-dimensional crystals by cryoelectron microscopy (cryo-EM), which showed that EmrE was an unusual asymmetric dimer formed from a bundle of eight alpha-helices. The most favoured interpretation of the structure was that the monomers were oriented in opposite orientations in the membrane in an antiparallel orientation. A model was subsequently built based upon the cryo-EM data and evolutionary constraints and this model was consistent with mutagenic data indicating which amino-acid residues were important for substrate binding and transport. Two X-ray structures that differed significantly from the cryo-EM structure were subsequently retracted owing to a data-analysis error. However, the revised X-ray structure with substrate bound is extremely similar to the model built from the cryo-EM structure (r.m.s.d. of 1.4 A), suggesting that the proposed antiparallel orientation of the monomers is indeed correct; this represents a new structural paradigm in membrane-protein structures. The vast majority of mutagenic and biochemical data corroborate this structure, although cross-linking studies and recent EPR data apparently support a model of EmrE that contains parallel dimers.

Electron crystallography reveals plasticity within the drug binding site of the small multidrug transporter EmrE

EmrE is a Small Multidrug Resistance transporter (SMR) family member that mediates counter transport of protons and hydrophobic cationic drugs such as tetraphenylphosphonium (TPP+), ethidium, propidium and dequalinium. It is thought that the selectivity of the drug binding site in EmrE is defined by two negatively charged glutamate residues within a hydrophobic pocket formed from six of the alpha-helices, three from each monomer of the asymmetric EmrE homodimer. It is not apparent how such a binding pocket accommodates drugs of various sizes and shapes or whether the conformational changes that occur upon drug binding are identical for drugs of diverse chemical nature. Here, using electron cryomicroscopy of EmrE two-dimensional crystals we have determined projection structures of EmrE bound to three structurally different planar drugs, ethidium, propidium and dequalinium. Using image analysis and rigorous comparisons between these density maps and the density maps of the ligand-free and TPP+-bound forms of EmrE, we identify regions within the transporter that adapt differentially depending on the type of ligand bound. We show that all three planar drugs bind at the same pocket within the protein as TPP+. Furthermore, our analysis indicates that, while retaining the overall fold of the protein, binding of the planar drugs is accompanied by small rearrangements of the transmembrane domains that are different to those that occur when TPP+ binds. The regions in the EmrE dimer that are remodelled surround the drug binding site and include transmembrane domains from both monomers.

X-ray structure of EmrE supports dual topology model

EmrE, a multidrug transporter from Escherichia coli, functions as a homodimer of a small four-transmembrane protein. The membrane insertion topology of the two monomers is controversial. Although the EmrE protein was reported to have a unique orientation in the membrane, models based on electron microscopy and now defunct x-ray structures, as well as recent biochemical studies, posit an antiparallel dimer. We have now reanalyzed our x-ray data on EmrE. The corrected structures in complex with a transport substrate are highly similar to the electron microscopy structure. The first three transmembrane helices from each monomer surround the substrate binding chamber, whereas the fourth helices participate only in dimer formation. Selenomethionine markers clearly indicate an antiparallel orientation for the monomers, supporting a "dual topology" model.

Automatic lattice determination for two-dimensional crystal images

Electron crystallography determines the structure of membrane proteins and other periodic samples by recording either images or diffraction patterns. Computer processing of recorded images requires the determination of the reciprocal lattice parameters in the Fourier transform of the image. We have developed a set of three programs 2dx_peaksearch, 2dx_findlat and 2dx_getlat, which can determine the reciprocal lattice from a Fourier transformation of a 2D crystal image automatically. 2dx_peaksearch determines a list of Fourier peak coordinates from a processed calculated diffraction pattern. These coordinates are evaluated by 2dx_findlat to determine one or more lattices, using a-priori knowledge of the real-space crystal unit cell dimensions, and the sample tilt geometry. If these are unknown, then the program 2dx_getlat can be used to obtain a guess for the unit cell dimensions. These programs are available as part of the 2dx software package for the image processing of 2D crystal images at http://2dx.org.

When biochemistry meets structural biology: the cautionary tale of EmrE

When biochemistry meets structural biology a more complete understanding of the mechanism of biological macromolecules is usually achieved. Several high-resolution structures of ion-coupled transporters have enriched the understanding of mechanisms of substrate recognition, translocation and coupling of substrate fluxes. However, two X-ray structures of EmrE, the smallest ion-coupled multi-drug transporter, raised questions over the veracity of the structural model and represented a cautionary tale about the difficulty of determining the 3D structures of membrane proteins and the dangers of ignoring biochemical results. The 3D structures of EmrE have since been retracted because of faulty software, but the suggestion that the protomers in the dimer are in an antiparallel topological orientation sparked controversy that is still ongoing.

2dx—User-friendly image processing for 2D crystals

Electron crystallography determines the structure of two-dimensional (2D) membrane protein crystals and other 2D crystal systems. Cryo-transmission electron microscopy records high-resolution electron micrographs, which require computer processing for three-dimensional structure reconstruction. We present a new software system 2dx, which is designed as a user-friendly, platform-independent software package for electron crystallography. 2dx assists in the management of an image-processing project, guides the user through the processing of 2D crystal images, and provides transparence for processing tasks and results. Algorithms are implemented in the form of script templates reminiscent of c-shell scripts. These templates can be easily modified or replaced by the user and can also execute modular stand-alone programs from the MRC software or from other image processing software packages. 2dx is available under the GNU General Public License at 2dx.org.

Threonine-978 in the transmembrane segment of the multidrug efflux pump AcrB of Escherichia coli is crucial for drug transport as a probable component of the proton relay network

Escherichia coli AcrB is a multidrug efflux transporter that recognizes multiple toxic chemicals and expels them from cells. It is a proton antiporter belonging to the resistance-nodulation-division (RND) superfamily. Asp407, Asp408, Lys940, and Arg971 in transmembrane (TM) helices of this transporter have been identified as essential amino acid residues that probably function as components of the proton relay system. In this study, we identified a novel residue in TM helix 11, Thr978, as an essential residue by alanine scanning mutagenesis. Its location close to Asp407 suggests that it is also a component of the proton translocation pathway, a prediction confirmed by the similar conformations adopted by T978A, D407A, D408A, and K940A mutant proteins (see the accompanying paper). Sequence alignment of 566 RND transporters showed that this threonine residue is conserved in about 96% of cases. Our results suggest the hypotheses that Thr978 functions through hydrogen bonding with Asp407 and that protonation of the latter alters the salt bridging and hydrogen bonding pattern in the proton relay network, thus initiating a series of conformational changes that ultimately result in drug extrusion.

Quasi-symmetry in the Cryo-EM Structure of EmrE Provides the Key to Modeling its Transmembrane Domain

Small multidrug resistance (SMR) transporters contribute to bacterial resistance by coupling the efflux of a wide range of toxic aromatic cations, some of which are commonly used as antibiotics and antiseptics, to proton influx. EmrE is a prototypical small multidrug resistance transporter comprising four transmembrane segments (M1-M4) that forms dimers. It was suggested recently that EmrE molecules in the dimer have different topologies, i.e. monomers have opposite orientations with respect to the membrane plane. A 3-D structure of EmrE acquired by electron cryo-microscopy (cryo-EM) at 7.5 Angstroms resolution in the membrane plane showed that parts of the structure are related by quasi-symmetry. We used this symmetry relationship, combined with sequence conservation data, to assign the transmembrane segments in EmrE to the densities seen in the cryo-EM structure. A C alpha model of the transmembrane region was constructed by considering the evolutionary conservation pattern of each helix. The model is validated by much of the biochemical data on EmrE with most of the positions that were identified as affecting substrate translocation being located around the substrate-binding cavity. A suggested mechanism for proton-coupled substrate translocation in small multidrug resistance antiporters provides a mechanistic rationale to the experimentally observed inverted topology.

On Parallel and Antiparallel Topology of a Homodimeric Multidrug Transporter

The recently suggested antiparallel topology of EmrE has intriguing implications for many aspects of the biology of ion-coupled transporters. However, it is at odds with biochemical data that demonstrated the same topology for all protomers in the intact cell and with extensive cross-linking studies. To examine this apparent contradiction we chemically cross-linked dimers with a rigid bifunctional maleimide using Cys replacements at positions not permissible by an antiparallel topology. A purified cross-linked dimer binds substrate and transports it in proteoliposomes with kinetic constants similar to those of the non-cross-linked dimer. The cross-linked dimers do not interact with non-cross-linked dimers as judged from the fact that inactive mutants do not affect their activity (negative dominance). The results support the contention that EmrE with parallel topology is fully functional. We show that the detergents used in crystallization increase the fraction of monomers in solution. We suggest that the antiparallel orientation observed is a result of the arrangement of the monomers in the crystal. Functionality of EmrE with the suggested antiparallel orientation of the monomers remains to be characterized.

Bootstrap resampling for voxel-wise variance analysis of three-dimensional density maps derived by image analysis of two-dimensional crystals

Difference density maps are commonly used in structural biology for identifying conformational changes in macromolecular complexes. For interpretation of the results, it is essential to estimate the variance or standard deviation of the difference density and the distribution of errors in space. In order to compare three-dimensional density maps of gap junction channels with and without the C-terminal regulatory domain, we developed a bootstrap resampling method for estimation of the voxel-wise standard deviation. The bootstrap approach has been successfully used for estimating the sampling distribution from a limited data set and for estimating the statistical properties of the derived quantities [Efron, B., 1979. Bootstrap methods: another look at the jackknife. Ann. Stat. 7, 1-26]. In our application, the standard deviation map can be estimated by bootstrapping the images. Our results show that, apart from the symmetry axes and small regions bordering the lumen of the extracellular vestibule, difference maps normalized by the mean of the standard deviation map can be used as a good approximation of the t-test map of the gap junction crystals.

Comparison of three structures of the multidrug transporter EmrE

The small multidrug resistance proteins constitute a family of bacterial antiporters that confer multidrug resistance by H(+)-linked drug efflux across the bacterial cytoplasmic membrane. The structure of EmrE, the family archetype, has been determined by electron crystallography and shows that EmrE in the membrane is an asymmetric homodimer composed of a tightly packed bundle of eight alpha helices, six of which form the substrate-binding site, which has a single molecule of tetraphenylphosphonium at its centre. Two X-ray structures of EmrE have been determined; the first structure was of a non-native conformation of EmrE that formed a crystallographic tetramer, whereas EmrE in the second structure was an asymmetric dimer containing a single molecule of bound tetraphenylphosphonium. This recent EmrE structure bears a superficial resemblance to the electron crystallographic structure and the differences were ascribed to conformational changes. However, the biological relevance of these conformational differences is questionable.

Milestones in electron crystallography

Electron crystallography determines the structure of membrane embedded proteins in the two-dimensionally crystallized state by cryo-transmission electron microscopy imaging and computer structure reconstruction. Milestones on the path to the structure are high-level expression, purification of functional protein, reconstitution into two-dimensional lipid membrane crystals, high-resolution imaging, and structure determination by computer image processing. Here we review the current state of these methods. We also created an Internet information exchange platform for electron crystallography, where guidelines for imaging and data processing method are maintained. The server (http://2dx.org) provides the electron crystallography community with a central information exchange platform, which is structured in blog and Wiki form, allowing visitors to add comments or discussions. It currently offers a detailed step-by-step introduction to image processing with the MRC software program. The server is also a repository for the 2dx software package, a user-friendly image processing system for 2D membrane protein crystals.

Identification of tyrosine residues critical for the function of an ion-coupled multidrug transporter

Aromatic residues may play several roles in integral membrane proteins, including direct interaction with substrates. In this work, we studied the contribution of tyrosine residues to the activity of EmrE, a small multidrug transporter from Escherichia coli that extrudes various drugs across the plasma membrane in exchange with protons. Each of five tyrosine residues was replaced by site-directed mutagenesis. Two of these residues, Tyr-40 and Tyr-60, can be partially replaced with hydroxyamino acids, but in the case of Tyr-40, replacement with either Ser or Thr generates a protein with modified substrate specificity. Replacement of Tyr-4 with either Trp or Phe generates a functional transporter. A Cys replacement at this position generates an uncoupled protein; it binds substrate and protons and transports the substrate downhill but is impaired in uphill substrate transport in the presence of a proton gradient. The role of these residues is discussed in the context of the published structures of EmrE.

Structure Determination of Secondary Transport Proteins by Electron Crystallography: Two-Dimensional Crystallization of the Betaine Uptake System BetP

Structure determination at high resolution is still a challenge for membrane proteins in general, but in particular for secondary transporters due to their highly dynamic nature. X-ray structures of ten secondary transporters have recently been determined, but a thorough understanding of transport mechanisms necessitates structures at different functional states. Electron cryo-microscopy of two-dimensional (2D) crystals offers an alternative to obtain structural information at intermediate resolution. Electron crystallography is a sophisticated way to study proteins in a natural membrane environment and to track conformational changes in situ. Furthermore, basic interactions between protein and lipids can be investigated. Projection and 3-dimensional maps of six secondary transporters from different families have been determined by electron crystallography of 2D crystals at a resolution of 8 A and better. In this review, we give an overview about the principles of 2D crystallization, in particular of secondary transporters, and summarize the important steps successfully applied to establish and improve the 2D crystallization of the high-affinity glycine betaine uptake system from Corynebacterium glutamicum, BetP.