"Hybrid" myosin filaments from smooth and striated muscle

Filament evanescence of myosin II and smooth muscle function

Smooth muscle is an integral part of hollow organs. Many of them are constantly subjected to mechanical forces that alter organ shape and modify the properties of smooth muscle. To understand the molecular mechanisms underlying smooth muscle function in its dynamic mechanical environment, a new paradigm has emerged that depicts evanescence of myosin filaments as a key mechanism for the muscle’s adaptation to external forces in order to maintain optimal contractility. Unlike the bipolar myosin filaments of striated muscle, the side-polar filaments of smooth muscle appear to be less stable, capable of changing their lengths through polymerization and depolymerization (i.e., evanescence). In this review, we summarize accumulated knowledge on the structure and mechanism of filament formation of myosin II and on the influence of ionic strength, pH, ATP, myosin regulatory light chain phosphorylation, and mechanical perturbation on myosin filament stability. We discuss the scenario of intracellular pools of monomeric and filamentous myosin, length distribution of myosin filaments, and the regulatory mechanisms of filament lability in contraction and relaxation of smooth muscle. Based on recent findings, we suggest that filament evanescence is one of the fundamental mechanisms underlying smooth muscle’s ability to adapt to the external environment and maintain optimal function. Finally, we briefly discuss how increased ROCK protein expression in asthma may lead to altered myosin filament stability, which may explain the lack of deep-inspiration–induced bronchodilation and bronchoprotection in asthma.

Muscle myosins form folded monomers, dimers, and tetramers during filament polymerization in vitro

Muscle contraction depends on the cyclical interaction of myosin and actin filaments. Therefore, it is important to understand the mechanisms of polymerization and depolymerization of muscle myosins. Muscle myosin 2 monomers exist in two states: one with a folded tail that interacts with the heads (10S) and one with an unfolded tail (6S). It has been thought that only unfolded monomers assemble into bipolar and side-polar (smooth muscle myosin) filaments. We now show by electron microscopy that, after 4 s of polymerization in vitro in both the presence (smooth muscle myosin) and absence of ATP, skeletal, cardiac, and smooth muscle myosins form tail-folded monomers without tail-head interaction, tail-folded antiparallel dimers, tail-folded antiparallel tetramers, unfolded bipolar tetramers, and small filaments. After 4 h, the myosins form thick bipolar and, for smooth muscle myosin, side-polar filaments. Nonphosphorylated smooth muscle myosin polymerizes in the presence of ATP but with a higher critical concentration than in the absence of ATP and forms only bipolar filaments with bare zones. Partial depolymerization in vitro of nonphosphorylated smooth muscle myosin filaments by the addition of MgATP is the reverse of polymerization.

Expression of smooth muscle myosin heavy chains and unloaded shortening in single smooth muscle cells

The functional significance of the variable expression of the smooth muscle myosin heavy chain (SM-MHC) tail isoforms, SM1 and SM2, was examined at the mRNA level (which correlates with the protein level) in individual permeabilized rabbit arterial smooth muscle cells (SMCs). The length of untethered single permeabilized SMCs was monitored during unloaded shortening in response to increased Ca2+ (pCa 6.0), histamine (1 microM), and phenylephrine (1 microM). Subsequent to contraction, the relative expression of SM1 and SM2 mRNAs from the same individual SMCs was determined by reverse transcription-polymerase chain reaction amplification and densitometric analysis. Correlational analyses between the SM2-to-SM1 ratio and unloaded shortening in saponin- and alpha-toxin-permeabilized SMCs (n = 28) reveal no significant relationship between the SM-MHC tail isoform ratio and unloaded shortening velocity. The best correlations between SM2/SM1 and the contraction characteristics of untethered vascular SMCs were with the minimum length attained following contraction (n = 20 and r = 0.72 for alpha-toxin, n = 8 and r = 0.78 for saponin). These results suggest that the primary effect of variable expression of the SM1 and SM2 SM-MHC tail isoforms is on the cell final length and not on shortening velocity.

Contraction of reconstituted Dictyostelium cytoskeletons: an apparent role for higher order associations among myosin filaments

A large number of cellular functions require assembly of actin and myosin and coordinated interactions between the resulting filaments. To better understand the structure and function of one such contractile assembly, we have begun fractionation and reconstitution studies of Dictyostelium cytoskeletons. Isolated cytoskeletons rapidly contracted when mixed with Mg-ATP, and myosin II was essential for this since myosin-depleted (stripped) cytoskeletons failed to contract. Dictyostelium, Acanthamoeba, or skeletal muscle myosins bound to stripped cytoskeletons with equal efficiency, and the Mg-ATPase of all three myosins was stimulated by the cytoskeleton-associated actin. Near neutral pH, however, only the homologous system reconstituted with Dictyostelium myosin contracted, despite the fact that under the same conditions all three myosins bound to myosin-depleted (ghost) muscle myofibrils and restored contractility. Individual Dictyostelium myosin thick filaments have a strong tendency to aggregate and associate end-to-end, and this may be important for functional contraction of cytoskeletons. This suggestion is supported by the observation that under conditions where individual Acanthamoeba myosin filaments aggregated, reconstituted cytoskeletons contracted. None of the solution conditions tested caused rabbit muscle myosin filaments to aggregate or to contract cytoskeletons. Thus higher order associations among individual myosin filaments may be essential for some types of cell motility.

Effects of light chain phosphorylation and skeletal myosin on the stability of non-muscle myosin filaments

The effect of light chain phosphorylation and the presence of skeletal muscle myosin on the stability of non-phosphorylated non-muscle myosin filaments was investigated. Purified skeletal, brush border and thymus myosins were assembled in vitro into hybrid filaments consisting of varying proportions of (1) non-muscle and skeletal myosins, or (2) phosphorylated and non-phosphorylated non-muscle myosins. The stability of these hetero- and homopolymers in the presence of MgATP was determined using sedimentation, gel electrophoresis and immunochemical techniques. In addition, the effect of a monoclonal antibody, binding to the tip of brush border myosin tail, on the assembly of the homo- and heteropolymers, was tested. Filamentous non-phosphorylated non-muscle myosin was disassembled by MgATP to the same extent whether in homo- or heteropolymers, indicating that skeletal myosin has no stabilising effect on the hybrid filaments. The presence of small amounts of phosphorylated non-muscle myosin was, however, found to prevent the complete disassembly by MgATP of non-phosphorylated non-muscle myosin filaments, indicating that light chain phosphorylation stabilizes co-operatively non-muscle myosin filaments. The monoclonal antibody prevented the assembly of brush border myosin into both homo- and heteropolymers, and its effect on the filaments was compared with that of MgATP.

AN ultrastructural study of cross-bridge arrangement in the frog thigh muscle thick filament

We have developed thick filament isolation methods that preserve the relaxed cross-bridge order of frog thick filaments such that the filaments can be analyzed by the convergent techniques of electron microscopy, optical diffraction, and computer image analysis. Images of the filaments shadowed by using either unidirectional shadowing or rotary shadowing show a series of subunits arranged along a series of right-handed near-helical strands that occur every 43 nm axially along the filament arms. Optical filtrations of images of these shadowed filaments show 4-5 subunits per half-turn of the strands, consistent with a three-stranded arrangement of the cross-bridges, thus supporting our earlier results from negative staining and computer-image analysis. The optical diffraction patterns of the shadowed filaments show a departure from the pattern expected for helical symmetry consistent with the presence of cylindrical symmetry and a departure of the cross-bridges from helical symmetry. We also describe a modified negative staining procedure that gives improved delineation of the cross-bridge arrangement. From analysis of micrographs of these negatively stained filament tilted about their long axes, we have computed a preliminary three-dimensional reconstruction of the filament that clearly confirms the three-stranded arrangement of the myosin heads.

Functionality of muscle proteins in gelation mechanisms of structured meat products

Recent advances in muscle biology concerning the discoveries of a large variety of proteins have been described in this review. The existence of polymorphism in several muscle proteins is now well established. Various isoforms of myosin not only account for the difference in physiological functions and biochemical activity of different fiber types or muscles, but also seem to differ in functional properties in food systems. The functionality of various muscle proteins, especially myosin and actin in the gelation process in modal systems which simulate structured meat products, is discussed at length. Besides, the role of different subunits and subfragments of myosin molecule in the gelation mechanism, and the various factors affecting heat-induced gelation of actomyosin in modal systems are also highlighted. Finally, the areas which need further investigation in this discipline have been suggested.

Physical and enzymatic properties of myosin from porcine brain

Porcine brain myosin is a cytoplasmic protein similar to, but distinct from, its muscle counterpart. It has a high K+-ATPase activity at high ionic strength in EDTA and a low Mg+2-ATPase activity that is activated fivefold by either porcine brain or rabbit skeletal muscle actin. The molecule consists of three classes of subunits, with molecular weights of approximately 195,000 , 19,000, and 16,000. Brain myosin contains less glutamic acid, less lysine, and more threonine, serine, proline, and tyrosine than skeletal muscle myosin. The brain myosin extinction coefficient at 278 nm is 0.810 cm2/mg. Hydrodynamic studies yield an S020,w of 4.95S, a D020,w of 1.07 x 10(-7) cm2/s for brain myosin, and indicate that the molecules aggregate at high ionic strength. The molecular weight of the molecule, as calculated from extrapolation of D020,w/S20,w to zero concentration, is 444,000. The intrinsic viscosity of brain myosin is 0.191 ml/mg. These data are consistent with a highly asymmetric molecular species. Circular dichroism spectroscopy indicates that brain myosin is 58-60% alpha-helical in the presence of Ca+2 ions, and that removal of Ca+2 causes a small change in the spectrum.

Interaction between vertebrate skeletal and uterine muscle myosins and light meromyosins

The specific contributions of this work may be summarized as follows: (a) No hybridization of uterine and skeletal myosin occurs at pH 6.0 although previous studies have shown that hybridization does occur at pH 6.5 (B. Kaminer et al. 1976. J. Mol. Biol. 100:379-386) or 7.0 (T. Pollard. 1975. J. Cell Biol. 67:93-104) (b) Hybridization of uterine and skeletal light meromyosins (LMM) occurs at pH 7.0 but not at pH 6.0, which is analogous to the hybridization of myosins. (c) In hybridized paracrystals there is a uniform distribution of both uterine and skeletal LMM molecules because all the paracrystals have only one axial repeat pattern. This makes it highly likely that in hybridized filaments the two myosins are also uniformly distributed throughout the filaments. (d) The 14-nm repeat of white bands observed in paracrystals of uterine LMM formed at pH 6.0, compared with the 14-nm repeat of dark bands observed with skeletal LMM under the same conditions, probably reflects differences in surface charge density along the different LMM molecules.