The effect of fiber post presence and restorative technique on the biomechanical behavior of endodontically treated maxillary incisors: an in vitro study

The extended finite element method in endodontics: A scoping review and future directions for cyclic fatigue testing of nickel-titanium instruments

OBJECTIVES

The present study reviews the current literature regarding the utilization of the extended finite element method (XFEM) in clinical and experimental endodontic studies and the suitability of XFEM in the assessment of cyclic fatigue in rotary endodontic nickel-titanium (NiTi) instruments.

MATERIAL AND METHODS

An electronic literature search was conducted using the appropriate search terms, and the titles and abstracts were screened for relevance. The search yielded 13 hits after duplicates were removed, and four studies met the inclusion criteria for review.

RESULTS

No studies to date have utilized XFEM to study cyclic fatigue or crack propagation in rotary endodontic NiTi instruments. Challenges such as modelling material inputs and fatigue criteria could explain the lack of utilization of XFEM in the analysis of mechanical behavior in NiTi instruments.

CONCLUSIONS

The review showed that XFEM was seldom employed in endodontic literature. Recent work suggests potential promise in using XFEM for modelling NiTi structures.

Effect of fiber-reinforced direct restorative materials on the fracture resistance of endodontically treated mandibular molars restored with a conservative endodontic cavity design

OBJECTIVE

This study aimed to evaluate the fracture strength of teeth restored using fiber-reinforced direct restorative materials after endodontic treatment with a conservative mesio-occlusal access cavity design.

MATERIALS AND METHODS

A total of 100 extracted intact mandibular first molars were selected and distributed into a positive control group where teeth left intact and the following four test groups comprised of teeth with conservative mesio-occlusal access cavities that had undergone root canal treatment (n = 20/group): access cavity without restoration (negative control), bulk-fill resin composite with horizontal glass fiber post reinforcement, fiber-reinforced composite with bulk-fill resin and bulk-fill resin composite. Following thermocycling (10,000 cycles), fracture resistance was measured using a universal testing machine. Statistical analyses (one-way analysis of variance and the Tamhane test) were performed, and statistical significance was set at p < 0.05.

RESULTS

Groups with minimally invasive access cavities had lower fracture strength than intact teeth, regardless of the restoration material (p < 0.05). Fiber-reinforced composite groups demonstrated higher fracture strength than bulk-fill resin composite alone (p < 0.05). Fracture types varied among groups, with restorable fractures predominant in the fiber-reinforced composite groups.

CONCLUSION

This study suggests that using fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, can effectively enhance the fracture strength of endodontically treated teeth with conservative access cavities. However, using only bulk-fill resin composite is not recommended based on the fracture strength results.

CLINICAL SIGNIFICANCE

When teeth that undergo endodontic treatment are restored using a conservative access cavity design and fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, the fracture strength of the teeth can be effectively increased.

Current Insights on Fiber Posts: A Narrative Review of Laboratory and Clinical Studies

PURPOSE

The aim of this study was to review the literature related to the clinical performance and laboratory findings regarding fiber posts, as well as the cementation technique employed with their use.

MATERIALS AND METHODS

A literature search was performed using an electronic database, PubMed/Medline, between 2010 and 2023. The terms used were "intra coronal post, fiber post, post cementation, and post length". Titles and abstracts were initially screened, and a full-text assessment was conducted for those that fulfilled the inclusion criteria. The reference list of the collected papers was also screened for further relevant citations.

RESULTS

In this work, 135 potentially eligible studies were analyzed. Titles and abstracts of 90 studies followed the inclusion criteria and were selected for a full-text assessment, resulting in 50 studies selected. Moreover, additional studies from relevant citations were included, totaling 57 studies.

CONCLUSION

According to the laboratory and clinical studies revised, the survival rate between fiber and prefabricated and cast metal posts was similar, and failures were mainly related to the loss of retention. The intra-canal post length of less than two-thirds of the root length presented successful results when ferrule was present. Furthermore, the ferrule increased the longevity of teeth restored with fiber posts. Additionally, the use of a surface treatment protocol for fiber posts and the adhesive cementation technique both contributed to the clinical success and longevity of the intra-canal post.

Finite Element Analysis of Stress Distribution in Root Canals When Using a Variety of Post Systems Instrumented with Different Rotary Systems

It is very important for clinicians to provide restorative treatments that provide durability for endodontically treated teeth. Trauma, occlusal premature contact, and features of teeth are some of the issues that can cause vertical root fractures (VRFs) in root canal-treated teeth. The aim of this 3-D study was to compare stress distribution on mandibular premolar teeth when using a variety of post designs instrumented with different rotary systems. Six mandibular premolar teeth were instrumented with the following tools: ProTaper Next, WaveOne (WO), Reciproc (R), ReciprocBlue (RB), F6-Skytaper, and TF-Adaptive. Teeth were scanned using cone beam computed tomography (CBCT) and the images were transferred to the Catia V5R25 software. Data were recorded in a stereolithography (STL) format. Four different post systems were used, fabricated from metal, fiber, zirconia, and titanium, respectively. Dentin, gutta, post, core, and crown models were added to the solid model. ANSYS V17.2 finite element analysis (FEA) software was used to determine stress distribution on each assembly. Finite analysis models were created that allowed for the calculation of stress distribution of 250-N loading at a 45° angle and vertical in relation to the roots. The maximum principal stress and von Mises values were higher under oblique loading on the roots. The F6-Skytaper and WO systems showed lower stress than other systems. The TF-Adaptive instrument showed higher stress distribution than the other models. Fiber and titanium posts showed lower stress than others. The F6-Skytaper, R, and RB instruments were found to be most effective in terms of displacement of the crown, resulting in the lowest stress values. Fiber and titanium posts showed better results than other post systems, while root canals instrumented with the F6-Skytaper and WO instruments were less likely to result in root fractures.

Influence of presence or absence of posts on the failure rates of post endodontic restorations: A systematic review and meta-analysis

Aim

The study was designed to evaluate the existing evidence on the failure rates of post-endodontic restorations retained with and without post in endodontically treated teeth (ETT).

Settings and Design

Preferred Reporting Items for Systematic Reviews and Meta-Analyses- Protocol (PRISMA-P) guidelines were used to formulate the review.

Materials and Methods

Randomized controlled trials (RCT's) and prospective clinical studies comparing post endodontic restorations retained with and without post were included. PubMed/Medline, Embase, Cochrane Library and Scopus databases were searched to recognize relevant full-text articles in English language. The quality of the RCT's were evaluated using the Cochrane collaboration tool to assess the risk of bias and reported as having high, low or unclear risk. Random-effects model at a 95% confidence interval was used for the meta-analysis.

Statistical Analysis Used

Meta-analyses was performed using the Mantel -Haenszel method31 and risk ratio, with a 95% confidence interval (CI), was estimated for dichotomous data. Random effects model32 was used as the pooling method and 95% confident interval (α = .05 for RR values) in Review Manager (RevMan) [Computer program]. Version 5.4. The Cochrane Collaboration, 2020).

Results

Four studies comparing post retained and post free restorations in ETT with a total of 916 restorations were included in the analysis. The total risk ratio was 2.16, (95% CI:1.25 to 3.72).

Conclusion

ETT with post retained restorations exhibited significantly lower failure rates compared to restorations without post. Well-designed RCT's are warranted to develop a clinical protocol with respect to post-retained restorations.

Comparative evaluation of fracture resistance of endodontically treated maxillary premolars reinforced by customized glass fiber post in two different ways: An in vitro study

Context

Endodontically treated premolars are currently restored with direct bonded techniques in conservative manner enabling them to bear functional stresses homogeneously.

Aim

The study aimed to evaluate the effect of placement of compactable glass fibers in reinforcing the endodontically treated teeth in a novel conservative manner.

Settings and Design

Research laboratory, in vitro study.

Materials and Methods

Seventy-five extracted maxillary premolars were procured. Fifteen teeth were left untreated (Group A) and the remaining teeth were endodontically treated followed by standardized mesio-occluso-distal preparation and randomly assigned to experimental groups (n = 15) as follows: (B) no restoration, (C) restoration with composite, (D) EverStick^® POST followed by composite, and (E) vertical glass fibers within 3 mm of the coronal root canal space and buccopalatal flaring of the coronal fibers followed by composite. After conditioning and thermocycling, specimens were loaded under a universal testing machine to evaluate fracture resistance and fracture pattern of specimens.

Statistical Analysis Used

Obtained scores were statistically analyzed using one-way analysis of variance test for stress analysis, post hoc Tukey's test for intergroup comparison, and Chi-square test for analysis of favorable and unfavorable fracture.

Results

The fracture resistance was highest to lowest as follows: Group A > E > C > D > B (P < 0.001).

Conclusion

EverStick^®POST used in conservative manner improved fracture strength of teeth significantly.

Effect of Cervical Lesions on Fracture Resistance and Failure Mode of Maxillary Central Incisors Restored with Fiber Posts and Complete Crowns

PURPOSE

To investigate the effect of a cervical cavity extending 1 mm apical to the cemento-enamel junction (CEJ) on fracture resistance and failure mode of maxillary central incisors that have been treated endodontically, present with complete and incomplete ferrules, and are restored with and without a fiber post.

METHODS AND MATERIALS

50 intact human maxillary central incisors were divided into five groups (n=10): CG (control group) 6-mm fer-rule height, no cervical cavity, and without post; (CO) 6-mm ferrule height without post, with a cervical cavity (access to root canal and cervical cavity restored with composite resin), cervical cavity; and post with ferrule heights of 1 mm (CP1), 2 mm (CP2), and 6 mm (CP6) restored with fiberglass post and composite resin core. After complete metal crowns were cemented on all specimens, they were subjected to thermal cycling (6000 cycles, 5°C/55°C), followed by immediate testing of fracture resistance. After failure, the specimens were sectioned buccolingually to evaluate and identify the mode of failure. The data were analyzed with an analysis of variance (ANOVA) and the Student-Newman-Keuls multiple comparison tests (α =0.05).

RESULTS

A 1-mm ferrule height (CP1) fracture resistance was significantly lower (531±125 N) compared to the 6-mm ferrule height (CP6) (769±175 N) (p<0.05). With respect to the groups with similar residual dentin, with and without a cervical cavity, CG (667±119 N) and CO (668±119 N), the presence of a post (CP6) increased the resistance to fracture, although no statistically significant difference was demonstrated. Partial decementation was observed in all specimens of CG and CP6, in nine of CP1 and CP2, and in three in CO. Root fractures occurred in 23 specimens. The root surface was exposed 2 mm below the CEJ to simulate bone level. Propagation of subosseous cracks occurred in four specimens in CG and CP2, in seven specimens in CP6, in two specimens in CP1, and in six specimens in CO. All were considered catastrophic failures.

CONCLUSIONS

Within the limitations of this study it is suggested that, when restoring an endodontically treated maxillary central incisor that has a cervical lesion and needs to be restored with a complete crown, a fiber post is cemented to improve fracture resistance.

Adhesive strength of fiberglass posts treated with thio-urethane-based experimental silanes

Purpose:

The aim of this study was to evaluate the adhesive bond strength of fiberglass posts treated with experimental silanes based on thio-urethane and submitted to thermo and mechanical cycles.

Materials and methods:

Bovine roots were divided into six groups: RX-RU2 (RelyX CP + RelyX U200); PETMP-HDDI-RU2 (PETMP-HDDI + RelyX U200); PETMP-BDI-RU2 (PETMP-BDI + RelyX U200); RX-RU (RelyX CP + RelyX Ultimate); PETMP-HDDI-RU (PETMP-HDDI + RelyX Ultimate); PETMP-BDI-RU (PETMP-BDI + RelyX Ultimate). One slice from each root third (n=10) was submitted to the push-out test and the values evaluated with R Program statistical analysis, while the failure pattern assessed in percentage.

Results:

Among root thirds, RX-RU2 promoted greater strength at the cervical and apical thirds; PETMP-HDDI-RU2 showed highest values at the three thirds; and PETMP-BDI-RU2 was strongest at the apical third. RX-RU presented higher strength at the apical third, and PETMP-HDDI-RU and PETMP-BDI-RU had similar values at the three thirds. In each root third, PETMP-HDDI-RU2 showed similar strength at all thirds, and similar strength at the apical third was observed for other associations. Mixed and adhesive failures predominated.

Conclusion:

Experimental silanes promoted different bond strength values in the adhesion of fiberglass posts to the root thirds, with better results for PETMP-HDDI silane. The root region did not influence the failure pattern and most slices showed mixed (MCDP) or adhesive (ADP) failure.

Effect of intraradicular fiber post on the fracture resistance of endodontically treated and restored anterior teeth: A systematic review and meta-analysis

STATEMENT OF PROBLEM

A fiber post is indicated when there is a significant loss of tooth structure and additional support for the restoration is needed. However, whether the use of a glass fiber post affects the fracture susceptibility of the restored anterior teeth is unknown.

PURPOSE

The purpose of this systematic review and meta-analysis was to evaluate the fracture resistance of endodontically treated and restored anterior teeth and to answer the research question, "Does the use of a fiber post influence the fracture resistance of endodontically treated and restored anterior teeth compared with alternative restorative treatments?"

MATERIAL AND METHODS

A search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, Cochrane Library, and Embase databases without date and/or language restrictions (updated in July, 2020). In vitro studies comparing the fracture strength of endodontically treated and restored anterior teeth with and without fiber posts were included. The risk of bias was evaluated by using the previous meta-analyses of in vitro studies. The results were presented as standardized mean difference with a 95% confidence interval. Statistical heterogeneity of treatment effects between studies was assessed using the Cochran Q test and the I2 inconsistency test, and values greater than 50% were considered indicative of substantial heterogeneity.

RESULTS

After the removal of duplicates and title and abstract screening, 31 studies remained. Seventeen were considered low risk of bias, 10 were medium risk of bias, and 4 were high risk of bias. Meta-analysis comparing control and experimental groups favored the use of a fiber post in endodontically treated teeth with some types of restoration to improve fracture resistance (standardized mean difference= 0.5 [0.08; 0.92]); a glass fiber post was also favored (standardized mean difference=0.92 [0.43; 1.42]); for veneer preparations and teeth with cervical cavities, a fiber post increases the fracture strength (standardized mean difference= 0.74 [0.01; 1.47]; 1.18 [0.35; 2.02], respectively).

CONCLUSIONS

The use of glass fiber posts increases the fracture resistance of endodontically treated and restored teeth.

Influence of glass fiber posts on the fracture susceptibility of endodontically treated maxillary anterior teeth with direct veneers: Preliminary results of a randomized clinical trial

OBJECTIVE

The purpose of this randomized clinical trial was to evaluate the influence of glass fiber posts on fracture susceptibility of endodontically treated maxillary anterior teeth with direct veneers.

MATERIALS AND METHODS

Fifty participants had 1 maxillary anterior tooth restored with a direct veneer. They were divided into 2 groups (n = 25) according to the use of intraradicular glass fiber posts. Clinical evaluation was performed at baseline, 6 and 12 months. The treatment success was determined by the absence of tooth fracture. If there was fracture, it was classified according to its extent. Fischer exact test was performed to analyze the criteria among the groups at each evaluation time. Friedman repeated analysis of variance assessed the difference in the performance of each group at three recall times (α = 0.5).

RESULTS

For control group, at the 6-month follow-up, one tooth had suffered a catastrophic failure, which resulted in tooth extraction. Fisher statistical analysis showed no significant difference between the cumulative success rate of the groups for the 6 (P > .999) and the 12-month (P > .999) period. Friedman test showed no significant difference among the periods of evaluation (P > .999).

CONCLUSIONS

Both groups had a similar success rate for maxillary anterior endodontically treated teeth with direct veneers after 12 months.

CLINICAL IMPLICATIONS

Glass fiber post use does not influence the fracture susceptibility of maxillary anterior endodontically treated teeth with direct veneers in the short term.

RETROSPECTIVE ANALYSIS OF THE STATE OF DIRECT DENTAL RESTORATIONS AFTER ENDODONTIC TREATMENT

Endodontic treatment is accompanied by the loss of a significant amount of tooth crowns, which leads to a significant decrease in their strength characteristics. The restoration of endodontically treated teeth, as a rule, is carried out by the direct method, however, a unified approach regarding direct or indirect restoration has not yet been determined. The aim – retrospective analysis of the clinical condition of direct restorations of endodontically treated teeth. Materials and methods. 284 patients aged 25 to 60 years were examined; they studied the state of 888 previously performed direct restorations of the anterior and posterior teeth after endodontic treatment in a period of 2 to 10 years. Restorations were evaluated according to the adapted clinical criteria “integrity of the restoration”, “marginal fit of the material”, “marginal staining”, “anatomical shape”, “colour correspondence for the restoration”, “roughness of the surface of the material”, as well as the criterion “condition of the contact point” for located on the contact surfaces of the teeth of the restorations. Results. Of the 888 examined direct restorations, 760 restorations (85.6±1.18 %) were located in the posterior teeth, with 562 restorations in the molars (63.3±1.62 % of the total) and 198 in the premolars (22 , 3±1.40 %), and 128 restorations (14.4±1.18 %) were detected in the anterior teeth, while in the incisors - 80 restorations (9.0±0.96 %), in the fangs – 48 (3.5±0.76 %). 720 restorations (81.1±1.31 %) were made from photocomposite materials, 97 restorations (10.9±1.05 %) from chemical curing composites, 71 (8.0±0.91 %) from glass-ionomer cements . The most common violations were colour mismatch – in 511 restorations (57.5±1.66 %), marginal staining - in 470 restorations (52.9±1.68 %), surface roughness - in 357 restorations (40.2±1.0, 65 %). More often than others, in the reconstructions of their photocomposites and glass ionomers there was a colour mismatch, and surface roughness for chemical composites. Conclusions. For direct tooth restoration after endodontic treatment in 81.1±1.31 % of cases, photocomposite materials are used, less often chemical curing composites and glass ionomers. Of the violations of such restorations, the most frequent are colour mismatch, surface roughness and edge staining.

Effect of Ferrule Location with Varying Heights on Fracture Resistance and Failure Mode of Restored Endodontically Treated Maxillary Incisors

PURPOSE

To investigate the effect of the location of a partial ferrule on 2 walls and the influence of ferrule height variations on remaining walls, fracture resistance, and failure mode of maxillary incisors endodontically treated and restored with fiber posts.

MATERIALS AND METHODS

Sixty intact human maxillary central incisors were divided into 6 groups (n = 10): no ferrule (NF), 2-mm ferrule (CF2), absence of lingual wall and 1 proximal wall with remaining walls' height, 1 mm (IF1), 2 mm (IF2), 3 mm (IF3), and 4 mm (IF4). They were restored with a fiberglass post and composite resin core. Complete metal crowns were then cemented on all specimens. Completed specimens were subjected to thermal cycling (6000 cycles, 5°C/55°C) followed by the immediate testing of fracture resistance. After failure, the specimens were sectioned buccolingually and evaluated to identify the mode of failure. The data were analyzed with an ANOVA and the Student-Newman-Keuls multiple comparison tests (α = 0.05).

RESULTS

An incomplete ferrule (IF2) with the lingual wall missing and 1 proximal wall had a fracture resistance of 494 ± 137 N, which was significantly less that of a complete ferrule (CF2) (707 ± 162 N, p = 0.002). An increase of 3 to 4 mm in height of the remaining walls had negligible influence on the fracture resistance: 514 ± 117 N (IF3), 557 ± 177 N (IF4). Partial decementation was observed in all specimens of IF3 and IF4, in 9 of IF1 and IF2, in 6 in NF, and in 3 in CF2. Root fractures occurred in 7 specimens, 4 in CF2, 1 in IF1, 1 in IF2, and 1 in IF4. Cracks under the cemento-enamel junction occurred in 4 specimens (NF and IF1), in 5 (IF2 and IF3), and in 6 (CF2 and IF4) and were considered catastrophic failures.

CONCLUSIONS

Specimens with a complete ferrule of 2 mm height were more resistant to fracture than specimens with 2 mm height and absence of the lingual wall and 1 proximal wall. A 3 or 4 mm wall height increase was associated with an insignificant increase in fracture resistance and cannot compensate for the absence of the lingual wall and 1 proximal wall.

Effect of restoration technique on resistance to fracture of endodontically treated anterior teeth with flared root canals

This study was designed to compare the impact of post and core systems on resistance to fracture of endodontically treated anterior teeth with flared root canals and to assess their fracture pattern. Sixty central incisors were cut horizontally 2 mm coronal to the cementoenamel junction (CEJ). After root canal therapy, teeth were assigned into 6 groups (n=10 each) based on a post system and used as follows: Group C, non-flared root received size #1 glass fiber posts (Control); Group AP, flared root restored with anatomical post; Group RC, flared root restored with size #1 fiber post and cemented with thick layer of resin cement; Group CR, flared root restored with size #1 and reinforced with composite resin; Group CM, cast post-core; Group CP, CAD/CAM polymer-infiltrated ceramic post and core. Following post cementation, core build-up and crown insertion, the specimens were thermo-cycled up to 10,000 cycles (5C/55C; 30 seconds dwell time, 6 seconds transition time) and then statically loaded at 1 mm/minute crosshead speed using a universal testing machine. One-way ANOVA and Tukey HSD post hoc test (α=0.05) were used for data analysis. Group C recorded significantly higher resistance to fracture values [(826.9±39.1) N] followed by group CP [(793.8±55.6) N] while group RC yielded the lowest fracture resistance values [(586.7±51.4) N]. The resistance to fracture of wide root canals can be enhanced by using one-piece CAM/CAM post and core as an alternative to the use of either glass fiber post, relined with composite resin increasing the thickness of luting cement or the use of cast post and core system. However, this was an in vitro investigation and further in vivo studies are necessary.

Direct restoration of endodontically treated maxillary central incisors: post or no post at all?

OBJECTIVES

The aim of this ex-vivo study was to evaluate the impact of cavity size and glass-fiber post (GFP) placement on the load capability of endodontically treated maxillary incisors directly restored with resin composite.

MATERIALS AND METHODS

Ninety-six extracted human maxillary central incisors were endodontically treated and distributed to four groups (n = 24): access cavity (A), access cavity and uni-proximal class III cavity (U), access cavity and bi-proximal class III cavity (B), and decoronated tooth (D). Specimens were restored with resin composite, and 12 specimen of each group received an adhesively placed glass-fiber post (P). Prior to linear loading, specimens were exposed to thermo-mechanical loading (TCML). Statistical analysis was performed using log-rank test after TCML, Kruskall-Wallis and Mann-Whitney U test to compare load capabilities (F_max).

RESULTS

Significantly more failures occurred in group D for specimens without GFP during TCML (p = 0.001). F_max (mean (SD) in N was (A) 513 (124), (AP) 554 (201), (U) 438 (171), (UP) 537 (232) (B) 483 (219), (BP) 536 (281), D 143 (181), and DP 500 (331), and differed significantly among groups (p = 0.003). Pair-wise comparison revealed lower F_max values for group D compared to all other groups (p < 0.034) except group DP.

CONCLUSIONS

Endodontically treated maxillary central incisors with cavity sizes up to bi-proximal class III may be successfully directly restored with resin composite. Post placement shows no additional effect except for decoronated endodontically treated incisors.

CLINICAL RELEVANCE

Endodontically treated incisors with access cavities to class III cavities can be successfully restored with resin composite. Post placement for decoronated ETT is recommended.

Stress Distribution, Tooth Remaining Strain, and Fracture Resistance of Endodontically Treated Molars Restored Without or With One or Two Fiberglass Posts And Direct Composite Resin

Objectives:

To evaluate the effects of direct composite resin without a post or with one or two fiberglass posts on the restoration of severely compromised endodontically treated molars.

Methods and Materials:

Forty-five molars with 2 mm of “remaining tooth structure” were divided into three groups: Wfgp, restored with Filtek Z350XT without a fiberglass post; 1fgp, restored with Z350XT with one fiberglass post in the distal root canal; and 2fgp, restored with Z350XT with two fiberglass posts, one in the distal root canal and the other in the mesial-buccal root canal. The teeth were load cycled. Tooth remaining strain was measured using strain gauges (n=10) at two moments: TrSt-100 N, during 100 N occlusal loading, and TrSt-Fr, at fracture load. Fracture resistance was calculated, and fracture mode was classified. The elastic modulus and Vickers hardness were calculated using dynamic indentation (n=5). Stress distribution was analyzed by three-dimensional finite element analysis.

Results:

The use of two fiberglass posts resulted in lower fracture resistance than was noted in the groups with one fiberglass post and without fiberglass posts. The lingual surface of the remaining tooth had higher strain values than the buccal surface, regardless of the restorative technique and moment of evaluation. The absence of a fiberglass post resulted in significantly higher strain values and more irreparable fracture modes than were noted in the other groups. The use of one fiberglass post had a better strain/fracture resistance ratio. Stresses were concentrated in the occlusal portion of the post and in the furcation region. The presence of one fiberglass post resulted in better stress distribution in the entire distal root dentin, reducing stress on the critical areas.

Conclusions:

The use of one fiberglass post for restoring molars with direct composite resin resulted in higher fracture resistance than did the use of two fiberglass posts; it also resulted in better tooth remaining strain and stress distribution and more reparable fracture modes than were seen in the group without a fiberglass post.

Effect of fiber posts on the fracture resistance of maxillary central incisors with Class III restorations: An in vitro study

STATEMENT OF PROBLEM

Endodontically treated teeth with Class III restorations show reduced fracture resistance. The placement of glass fiber posts may affect fracture resistance and should be further evaluated.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of fiber posts on the fracture resistance of endodontically treated maxillary central incisors with Class III restorations.

MATERIAL AND METHODS

Forty extracted human maxillary central incisors were selected and divided into 4 test groups (n=10 each) according to the restoration strategy: control group; endodontically treated teeth without endodontic posts (GHT); endodontically treated teeth with 2 Class III restorations simulating coronal destruction (GCT); endodontically treated teeth with 2 Class III restorations and a carbon fiber post (GCF); and endodontically treated teeth with 2 Class III restorations and a glass-fiber post (GGF). The fiber posts were adhesively cemented with composite resin cement, and the cavities were restored with composite resin. After 3 months of water storage, all specimens were loaded at 45 degrees in a universal testing machine until fracture and evaluated for fracture mode. The data were analyzed using 1-way ANOVA, followed by the Tukey honest significant difference multiple comparisons test (α=.05).

RESULTS

Mean ±SD failure loads ranged from 687.5 ±84.0 N to 943.8 ±93.1 N. One-way ANOVA revealed a statistically significant difference among the groups (P≤.05). The control group (GHT) had significantly higher resistance to fracture than the other groups (P≤.05).

CONCLUSIONS

Within the limitations of this in vitro study, placement of a fiber post did not affect the fracture resistance of endodontically treated maxillary central incisors with 2 Class III restorations.

Crown vs. composite for post-retained restorations: A randomized clinical trial

OBJECTIVES

This randomized clinical trial compared the survival of composite resin restorations and metal-ceramic crowns on endodontically treated teeth that received a glass fiber post using 2 different cementation methods.

METHODS

Forty-seven patients (age 42.5 ± 11.5) with fifty-seven endodontically treated teeth with extensive coronal damage but always with one intact surface were randomly allocated according to the type of coronal restoration: metal-ceramic crown or composite resin. In case of crown restoration, a core buildup was performed with microhybrid composite resin. The dentin bonding agent and composite resin used were the same for both direct and indirect restorations. Descriptive analysis was performed using FDI clinical criteria and survival of restorations/teeth analyzed using Kaplan-Meier statistics and log-rank tests.

RESULTS

57 restorations (30 composite resin and 27 crowns) were made in 47 patients. The recall rate was 100% and follow up time ranged between 1 and 5 years. One tooth was extracted 11 months post-restoration due to root fracture (composite group). Eight composite restorations and one crown had reparable failures, all due to secondary caries or restoration fracture. The overall annual failure rate (AFR) was 0.92% after 50 months for success of the restorations, with 1.83% for the composite group and 0.26% for the metal-ceramic crown group. The log-rank test showed no difference for survival according to the type of restoration (p=0.344). However, for success rates, metal-ceramic crowns demonstrated better performance (p=0.022).

CONCLUSIONS

Indirect restorations provided higher acceptable clinical performance and lower need for re-intervention, but both types of restorations presented good survival rates. (NCT01461239).

CLINICAL SIGNIFICANCE

When endodontically treated teeth with at least one intact surface must be restored, composite resin restorations and metal-ceramic crows are acceptable alternatives to achieve good survival and success rates.

Are posts necessary for the restoration of root filled teeth with limited tissue loss? A structured review of laboratory and clinical studies

Guidelines for post placement are lacking in respect of the amount of tooth structure, particularly in cases in which ≥50% of coronal structure is preserved. The aim of this review was to provide evidence-based principles for the use of posts in the restoration of root filled teeth with limited tissue loss. A literature search of laboratory and clinical studies published between 2000 and 2014 was conducted in PubMed. Included studies contained at least one study group with root filled teeth restored without a post, presented at least one group with root filled teeth with limited tissue loss, and, in the case of laboratory studies, performed mechanical cycling prior to a fracture resistance test. Based on the evidence from laboratory studies, root filled premolars and molars with limited tissue loss can be restored without posts, particularly when total coverage is planned. However, when no cusp protection is provided, post placement appears to be beneficial in premolars. Evidence regarding the best restoration option for root filled incisors with limited tissue loss remains controversial. When total coverage is intended, reconstruction seems to be successfully performed by restoration with composite. However, some reports consider that post insertion increases fracture loads. The review of clinical studies demonstrated that survival of teeth with substantial tooth tissue is not influenced by the use of posts. Exceptions were found when only premolars were investigated; in these cases, post placement was associated with greater survival rates in crowned teeth and fewer root fractures in teeth without cusp protection.

Fracture Resistance of Roots Restored with Four Different Fiber-Reinforced Composite Posts

OBJECTIVE

The aim of this study was to compare the resistance to vertical root fracture of root-filled teeth restored with four different fiber-reinforced composite (FRC) post systems and two types of dual-cured resin luting agents.

MATERIALS AND METHODS

Ninety extracted human maxillary central incisors were selected and decoronated to obtain a standardized root length of 14 mm. After root canal obturation, post spaces were prepared to a depth of 10 mm with a No. 3 post drill. The specimens (n = 80) were divided into two groups (n = 40) according to the resin luting agents used: group 1, Variolink II + ExciTE DSC; group 2, RelyX Unicem. These groups were subdivided into four subgroups (n = 10) and restored with one of the following post systems: (a) DT Light, (b) DT Light SL, (c) FRC Postec and (d) Everstick, while the remaining 10 teeth served as controls. The roots were subjected to axial compressive loading using a 2.2-mm-diameter metal sphere in a universal testing machine (0.5 mm/min). A factorial experiment with a single control group (analysis of variance) was used to test the resistance of the specimens.

RESULTS

Groups 2a (DT Light + RelyX Unicem; 398.5 N) and 1b (DT Light SL + Variolink II + ExciTE DSC; 431.1 N) had significantly higher resistance to fracture than the control group (334.1 N; p < 0.05). DT Light SL and FRC Postec Plus were more resistant to fracture when Variolink II was used as the luting cement. DT Light and Everstick had higher fracture resistance when they were luted with RelyX Unicem (p < 0.05).

CONCLUSION

The results of this study indicate that the use of quartz fiber posts (DT Light and DT Light SL) with an adhesive luting cement in root-filled teeth may reinforce the root to some extent.

Fracture resistance of endodontically treated teeth restored with glass fiber reinforced posts and cast gold post and cores cemented with three cements

STATEMENT OF PROBLEM

Dental fractures can occur in endodontically treated teeth restored with glass fiber reinforced posts and cast gold posts.

PURPOSE

The objective of this study was to record the fracture strength of endodontically treated teeth restored with glass fiber reinforced or cast gold post and cores cemented with 3 cements.

MATERIAL AND METHODS

Forty-two single-rooted premolars with standardized weakened roots were endodontically treated and allocated to 6 experimental groups (n=7) defined by the 2 factors investigated: post system and cement. Three groups were restored with glass fiber posts and resin-modified glass ionomer cement, dual-polymerizing resin cement, or chemically active autopolymerizing resin cement. The other 3 groups were restored with cast gold post and cores and the same 3 cements. The cores of the glass fiber post groups were fabricated with composite resin core material. Metal crowns were cemented on the cores in the 6 groups. The entire system was subjected to continuous compression in a universal testing machine, and fracture limit and location (cervical third, middle third, or apical third) were noted. Two-way ANOVA and the Scheffé test were used to analyze the data and compare the groups (α=.05).

RESULTS

Two-way ANOVA showed significant differences in the post type (P<.001) and the cements (P<.001). The interaction between them (P<.001) was statistically significant in the fracture resistance of the endodontically treated teeth. The greatest interaction between post and cement was the glass fiber post with resin-modified glass ionomer cement, followed by the cast gold post and core with resin-modified glass ionomer cement.

CONCLUSIONS

The use of a glass fiber reinforced post and resin-modified glass ionomer cement increased the fracture resistance of endodontically treated teeth.

WITHDRAWN: Effect of post space conditioning and luting resin on the retentive strength of fiber-reinforced composite resin posts

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Effects of post core materials on stress distribution in the restoration of mandibular second premolars: a finite element analysis

STATEMENT OF PROBLEM

Previous studies have not resolved the question as to which post and core combination optimizes the stress distribution within the post restoration and tooth.

PURPOSE

The purpose of this study was to determine which post and core combination provides the most favorable stress distribution upon loading.

MATERIAL AND METHODS

Three-dimensional models of teeth were created with the Ansys program to simulate different materials used for post and cores (Ti, NiCr, AuPd, zirconia, zirconia post/composite resin core, glass fiber post/composite resin core, and carbon fiber post/composite resin core) and metal ceramic crowns (nickel chromium alloy [Group NiCr] and gold palladium alloy [Group AuPd]). A force of 400 N was applied to the occlusal surface, and von Mises equivalent stress values were calculated.

RESULTS

Carbon fiber post/composite resin core/metal ceramic crowns with NiCr alloy core had the highest stress values in the weakened root, tooth/post interface, and post. NiCr post/NiCr core/metal ceramic crowns with NiCr alloy core had the lowest stress values in the weakened root and post. The zirconia post and core had the lowest stress value in the tooth/post interface.

CONCLUSIONS

A post material with a high elastic modulus led to lower stress in the weakened root (approximately 6%) and tooth/post interface (approximately 12%) and to higher stress in the post (approximately 5 times). A composite resin core led to higher stress in the weakened root (approximately 11% to 17%) and lower deformation in the tooth/post interface (approximately 17.5%) and post materials (approximately 24%). Group AuPd resulted in lower stress in the root and high stress in the post (approximately 4.5% to 7%) and affected the amount of deformation in posts with a composite resin core.

Fracture resistance of endodontically treated teeth restored with glass fiber posts of different lengths

STATEMENT OF PROBLEM

Endodontically treated teeth are known to have reduced structural strength. Glass fiber posts may influence fracture resistance and should be evaluated.

PURPOSE

The purpose of this study was to evaluate the influence of glass fiber post length on the fracture resistance of endodontically treated teeth.

MATERIAL AND METHODS

Forty intact human maxillary canines were selected and divided into 4 groups, the control group consisting of teeth restored with a custom gold cast post and core, with a length of two-thirds of the root. Other groups received prefabricated glass fiber posts in different lengths: group 1/3, removal of one-third of the sealing material (5 mm); group 1/2, removal of one-half of the sealing material (7.5 mm); and group 2/3, removal of two-thirds of the sealing material (10 mm). All the posts were cemented with resin cement, and the specimens with glass fiber posts received a composite resin core. All the specimens were restored with a metal crown and submitted to a compressive load until failure occurred. The results were evaluated by 1-way ANOVA, and the all pairwise multiple comparison procedures (Tukey honestly significantly difference test) (α=.05).

RESULTS

The ANOVA showed significant differences among the groups (P<.002). The Tukey test showed that the control group presented significantly higher resistance to static load than the other groups (control group, 634.94 N; group 1/3, 200.01 N; group 1/2, 212.17 N; and group 2/3, 236.08 N). Although teeth restored with a cast post and core supported a higher compressive load, all of them fractured in a catastrophic manner. For teeth restored with glass fiber posts, the failure occurred at the junction between the composite resin core and the root.

CONCLUSION

The length of glass fiber posts did not influence fracture load, but cast post and cores that extended two-thirds of the root length had significantly greater fracture resistance than glass fiber posts.

Influence of adhesive techniques on fracture resistance of endodontically treated premolars with various residual wall thicknesses

STATEMENT OF PROBLEM

The choice of restorative method is commonly based on the cavity configuration and the residual number of cavity walls. However, the residual wall thickness could be a valuable clinical parameter in the choice of restoration for endodontically treated teeth.

PURPOSE

The fracture resistance of endodontically treated premolars was compared with different wall thicknesses restored with direct composite resin with and without cuspal coverage and with and without fiber post insertion.

MATERIAL AND METHODS

This study included 104 intact human maxillary premolars extracted for periodontal or orthodontic reasons. Standardized mesio-occluso-distal cavities were prepared with different palatal wall thicknesses (1.5, 2, and 2.5 mm) and a buccal wall thickness of 2 mm. Teeth were restored with or without a fiber post and with or without cuspal coverage. Specimens were subjected to thermocycling (3000 cycles, 5 to 55°C) and embedded in polymerized acrylic resin. Teeth were submitted to cyclic fatigue followed by a static fatigue test with a universal testing machine; a compressive force was applied 30 degrees to the long axis of the teeth until fracture. The results were statistically analyzed by 3-way ANOVA (α=.05).

RESULTS

Residual wall thickness (P=.004), the type of adhesive restoration (P<.001), and fiber post insertion (P<.001) significantly influenced the fracture resistance of endodontically treated premolars.

CONCLUSIONS

In specimens with a cavity wall thickness >2 mm, direct intracuspal composite resin restorations supported by a fiber post achieved comparable fracture resistance. With a residual wall thickness <2 mm, only cuspal coverage with or without a fiber post provided satisfactory fracture resistance.

Effect of cavity design on tooth surface strain

STATEMENT OF PROBLEM

The loss of tooth structure can increase cuspal flexure, thereby reducing the fracture resistance of the tooth, or open the tooth-restoration interface, leading to microleakage.

PURPOSE

The purpose of this study was to evaluate tooth strain in teeth with different cavity preparations after loading and unloading.

MATERIAL AND METHODS

Ten intact human maxillary premolars were selected and embedded in epoxy resin molds. Constantan strain gauges were used and tested as an intact tooth (group I), occlusal cavity (group O), mesio-occlusal cavity (group MO), and finally mesio-occluso-distal cavity (group MOD). All teeth were subjected to gradual nondestructive occlusal loading and unloading (50 N, 70 N, 90 N, 110 N, 130 N, 50 N, 0 N) in a servohydraulic testing machine. All data were analyzed statistically by performing a repeated measures ANOVA with load and cavity as factors to compare the relevant mean strains, and a Bonferroni post hoc test was performed for multiple comparisons (α=.05).

RESULTS

The repeated measures ANOVA did not provide any evidence of an interaction between load and cavity but indicated a significant difference in the mean strains both between the loads (P<.001) and between the cavity groups (P<.001).

CONCLUSIONS

MOD cavities presented statistically significantly higher values of strain than MO, O, or intact teeth, and a significant increase in the values of mean strain for all cavities was observed, even with intact teeth, when nondestructive occlusal loading was increased.

In vitro fracture resistance of endodontically treated roots filled with a bonded filling material or different types of posts

AIM

This study aimed to compare the fracture resistance of roots filled with a bonded material, fiber posts, or titanium post systems.

METHODS

Canals in the first group were filled with AH Plus and gutta-percha cones, and roots in the second group were filled with Epiphany sealer and Resilon cones. The root fillings (60 roots) were removed up to 4 mm from the canal apex to obtain 10-mm-deep post spaces, and posts were cemented. The groups were as follows: AH Plus control group, Epiphany control group, AH Plus fiber post group, AH Plus titanium post group, Epiphany fiber post group, and Epiphany titanium post group. Fracture tests were performed by using an Instron testing machine. The force was applied at a 45° axial angle with a constant speed of 1 mm/min. For each sample, the force at which fracture occurred was recorded in units of newtons. Statistical analysis was carried out by using analysis of variance test.

RESULTS

There was no statistically significant difference between all groups (P > .05).

CONCLUSIONS

Titanium posts, fiber posts, and Epiphany root canal filling systems were found to have no reinforcing effect on endodontically treated roots.