Fermentative decolorization of olive mill wastewater by Lactobacillus plantarum

Chemical changes of potential probiotic Lactiplantibacillus plantarum and Lactobacillus pentosus starter cultures in natural Gemlik type black olive fermentation

The aim of this study was to determine the ability of probiotic Lactiplantibacillus plantarum and Lactobacillus pentosus starter cultures to maintain Olea europaea L. cv. Gemlik fermentation and some chemical changes occurred by HPLC. It was observed that starter cultures decreased the pH by increasing the acidity of the fermentation medium. In addition, it was determined that the number of yeast-mold (Y-M) and aerobic mesophilic bacteria (AMB) were lower than the number of lactic acid bacteria (LAB) in the samples with starter cultures. As the fermentation period progressed, it was observed that the amount and variety of phenolic substances increased, albeit slightly, in the brined olive samples to which the starter culture was added. Alcohols, biogenic amines, sugars and organic acids increased or decreased in all samples. During the fermentation gallic acid, apigenin, kaempferol, curcumin, vanillin, caffeic acid, salicylic acid, putrescine, triamine, spermidine and maleic acid could not be detected.

Enhancing Dark Fermentative Hydrogen Production from Problematic Substrates via the Co-Fermentation Strategy

The aim of the present paper is the improvement of dark fermentative hydrogen production from problematic substrates. In detail, the study is aimed at (i) investigating the inhibiting effect of two problematic biomasses (i.e., of olive mill wastewater, containing recalcitrant/toxic compounds and cheese whey, lacking pH buffering capacity) on the dark fermentation process, (ii) as well as verifying the possibility to apply a co-fermentation strategy to enhance the process. To investigate the inhibiting effect of the substrates, two experimental sets were conducted using olive mill wastewater and cheese whey alone, under different food-to-microorganism ratios (i.e., 1, 2.5, and 5). Further experiments were conducted to verify the possibility of improving hydrogen production via the co-fermentation strategy. Such experiments included two tests conducted using different volumetric percentages of olive mill wastewater and cheese whey (90% olive mill wastewater + 10% cheese whey and 80% olive mill wastewater + 20% cheese whey). Results show that using olive mill wastewater alone, the inhibiting effect increased at a higher food-to-microorganism ratio. Moreover, because of the occurrence of a metabolic shift, hydrogen was not produced using 100% cheese whey. Interestingly, compared to the 100% olive mill wastewater condition, the use of 20% cheese whey allowed to double the hydrogen yield, reaching the high cumulative hydrogen production of 2.08 LL−1. Obtained results confirm that the two investigated substrates exert inhibiting effects on microorganisms. Nevertheless, co-fermentation is an effective strategy to improve the dark fermentation process of problematic biomass.

Selection of Lactiplantibacillus Strains for the Production of Fermented Table Olives

Lactiplantibacillus strains (n. 77) were screened for technological properties (e.g., xylose fermentation, EPS production, antimicrobial activity, tolerance to NaCl and phenolic compounds, oleuropein degradation and hydroxytyrosol formation) relevant for the production of fermented table olives. Survival to olive mill wastewater (OMW) and to simulated gastro-intestinal tract (GIT), the capability to grow at different combinations of NaCl and pH values, radical scavenging activities and biofilm formation were further investigated in 15 selected strains. The screening step revealed high diversity among Lactiplantibacillus strains. Most of the strains were able to ferment xylose, while only a few strains produced EPS and had inhibitory activity against Y. lipolytica. Resistance to phenolic compounds (gallic, protocatechuic, hydroxybenzoic and syringic acids), as well as the ability to release hydroxytyrosol from oleuropein, was strain-specific. OMWs impaired the survival of selected strains, while combinations of NaCl ≤ 6% and pH ≥ 4.0 were well tolerated. DPPH and hydroxyl radical degradation were strain-dependent, while the capability to form biofilm was affected by incubation time. Strains were very tolerant to the GIT. The genome of Lpb. pentosus O17 was sequenced and analysed to verify the presence of genes involved in the degradation and metabolism of phenolic compounds. O17 lacks carboxylesterase and gallate decarboxylase (subunits B and D) sequences, and its gene profile differs from that of other publicly available Lpb. pentosus genomes.

Removal of Phenols in Table Olive Processing Wastewater by Using a Mixed Inoculum of Candida boidinii and Bacillus pumilus: Effects of Inoculation Dynamics, Temperature, pH, and Effluent Age on the Abatement Efficiency

The main goal of this paper was to assess the ability of a combination of Candida boidinii and Bacillus pumilus to remove phenol in table olive processing water, as a function of some variables, like temperature, pH, a dilution of waste and the order of inoculation of the two microorganisms. At this purpose C. boidinii and B. pumilus were sequentially inoculated in two types of table olive processing water (fresh wastewater, FTOPW and wastewater stored for 3 months-aged wastewater, ATOPW). pH (6 and 9), temperature (10 and 35 °C) and dilution ratio (0, 1:1) were combined through a 2k fractional design. Data were modeled using two different approaches: Multifactorial Analysis of Variance (MANOVA) and multiple regression. A higher removal yield was achieved by inoculating B. pumilus prior to the yeast (192 vs. 127 mg/L); moreover, an increased efficiency was gained at 35 °C (mean removal of 200 mg/L). The use of two statistic approach suggested a different weight of variables; temperature was a global variable, that is a factor able to affect the yield of the process in all conditions. On the other hand, an alkaline pH could increase the removal of phenol at 10 °C (25-43%).

Olive Mill Wastewater as Renewable Raw Materials to Generate High Added-Value Ingredients for Agro-Food Industries

Olive oil production represents an agro-industrial activity of vital economic importance for many Mediterranean countries. However, it is associated with the generation of a huge amount of by-products, both in solid and liquid forms, mainly constituted by olive mill wastewater, olive pomace, wood, leaves, and stones. Although for many years olive by-products have only been considered as a relevant environmental issue, in the last decades, numerous studies have deeply described their antioxidant, anti-inflammatory, immunomodulatory, analgesic, antimicrobial, antihypertensive, anticancer, anti-hyperglycemic activities. Therefore, the increasing interest in natural bioactive compounds represents a new challenge for olive mills. Studies have focused on optimizing methods to extract phenols from olive oil by-products for pharmaceutical or cosmetic applications and attempts have been made to describe microorganisms and metabolic activity involved in the treatment of such complex and variable by-products. However, few studies have investigated olive oil by-products in order to produce added-value ingredients and/or preservatives for food industries. This review provides an overview of the prospective of liquid olive oil by-products as a source of high nutritional value compounds to produce new functional additives or ingredients and to explore potential and future research opportunities.

Innovative Feasibility Study for the Reclamation of the Cascajo Wetlands in Peru Utilizing Sustainable Technologies

Wetlands are an important feature for our society that provides versatile benefits, such as habitat for diverse wildlife, shoreline erosion protection, flood control, and mitigation of climate change through capture and storage of carbon. The aim of this work was to assess the application of nanotechnologies for the restoration of the water quality in the Cascajo Wetlands, Peru, where the water quality was deteriorated. Ceramic-based bio-filters (CBBFs) were used to reduce and buffer the contamination rates of pollutants, whereas micro-nano bubbles (MNBs) were applied to increase the dissolved oxygen and release free radicals in water. Additionally, bio-fence was implemented to prevent water intrusion from the ocean. Remote sensing data through the Normalized Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI) was used to monitor the water surface condition. With treatment of CBBFs and MNBs for 13 months, we observed reduction in the chemical oxygen demand (COD), biological oxygen demand (BOD), total nitrogen (TN), and total phosphate (TP) in the water body, showing removal percentages of 98.5%, 97.5%, 98.1%, 98.5%, and 94.6%, respectively, in comparison with values before starting the implementation. The trends of NDVI and EVI over seasons are not completely aligned with the results taken from the wetlands treated with MNBs, CBBFs and bio-fence. While TN was highly correlated with the empirical value of TN based on remote sensing, no correlation was observed between COD and empirical COD. The use of eco-friendly techniques has performed efficiently to remove the pollutant.

Effect of fermentation on the antioxidant activity in plant-based foods

This study provides an overview of the factors that influence the effect of fermentation on the antioxidant activity and the mechanisms that augment antioxidative activities in fermented plant-based foods. The ability of fermentation to improve antioxidant activity is primarily due to an increase in the amount of phenolic compounds and flavonoids during fermentation, which is the result of a microbial hydrolysis reaction. Moreover, fermentation induces the structural breakdown of plant cell walls, leading to the liberation or synthesis of various antioxidant compounds. These antioxidant compounds can act as free radical terminators, metal chelators, singlet oxygen quenchers, or hydrogen donors to radicals. The production of protease, α-amylase and some other enzymes can be influenced by fermentation that may have metal ion chelation activity. Because the mechanisms that affect antioxidant activity during fermentation are extremely varied, further investigation is needed to establish the precise mechanisms for these processes.

Biodegradation of Olive Mill Wastewater by Trichosporon Cutaneum and Geotrichum Candidum

Olive oil production generates large volumes of wastewater. These wastewaters are characterised by high chemical oxygen demand (COD), high content of microbial growth-inhibiting compounds such as phenolic compounds and tannins, and dark colour. The aim of this study was to investigate biodegradation of olive mill wastewater (OMW) by yeasts Trichosporon cutaneum and Geotrichum candidum. The yeast Trichosporon cutaneum was used because it has a high potential to biodegrade phenolic compounds and a wide range of toxic compounds. The yeast Geotrichum candidum was used to see how successful it is in biodegrading compounds that give the dark colour to the wastewater. Under aerobic conditions, Trichosporon cutaneum removed 88 % of COD and 64 % of phenolic compounds, while the dark colour remained. Geotrichum candidum grown in static conditions reduced COD and colour further by 77 % and 47 %, respectively. This investigation has shown that Trichosporon cutaneum under aerobic conditions and Geotrichum candidum under facultative anaerobic conditions could be used successfully in a two-step biodegradation process. Further investigation of OMW treatment by selected yeasts should contribute to better understanding of biodegradation and decolourisation and should include ecotoxicological evaluation of the treated OMW.

Decolorization of molasses melanoidins and palm oil mill effluent phenolic compounds by fermentative lactic acid bacteria

Lactobacillus plantarum SF5.6 is one of the lactic acid bacteria (LAB) that has the highest ability of molasses melanoidin (MM) decolorization among the 2114 strains of LAB. The strains were isolated from spoilage, pickle fruit and vegetable, soil and sludge from the wastewater treatment system by using technical step of enrichment, primary screening and secondary screening. This LAB strain SF5.6 was identified by 16S rDNA analysis and carbohydrate fermentation (API 50 CH). The top five LAB strains having high MM decolorization (> 55%), namely TBSF5.8-1, TBSF2.1-1, TBSF2.1, FF4A and SF5.6 were selected to determine the optimal condition. It was found that the temperature at 30 degrees C under facultative conditions in GPY-MM medium (0.5% glucose, 0.1% peptone, 0.1% yeast extract, 0.1% sodium acetate, 0.05% MgSO4 and 0.005% MnCl2 in MM solution at pH 6) giving a high microbial growth and MM decolorization for all five strains. It was noticed that the decolorization of MM by LAB strains might be cell growth associated. L. plantarum SF5.6 grew rapidly within one day while the other strains took 2-3 days. This L. plantarum SF5.6 could rapidly decolorize MM to 60.91% without any lag phase, and it also had the ability to remove 34.00% phenolic compounds and 15.88% color from treated palm oil mill effluent.

Food phenolics and lactic acid bacteria

Phenolic compounds are important constituents of food products of plant origin. These compounds are directly related to sensory characteristics of foods such as flavour, astringency, and colour. In addition, the presence of phenolic compounds on the diet is beneficial to health due to their chemopreventive activities against carcinogenesis and mutagenesis, mainly due to their antioxidant activities. Lactic acid bacteria (LAB) are autochthonous microbiota of raw vegetables. To get desirable properties on fermented plant-derived food products, LAB has to be adapted to the characteristics of the plant raw materials where phenolic compounds are abundant. Lactobacillus plantarum is the commercial starter most frequently used in the fermentation of food products of plant origin. However, scarce information is still available on the influence of phenolic compounds on the growth and viability of L. plantarum and other LAB species. Moreover, metabolic pathways of biosynthesis or degradation of phenolic compounds in LAB have not been completely described. Results obtained in L. plantarum showed that L. plantarum was able to degrade some food phenolic compounds giving compounds influencing food aroma as well as compounds presenting increased antioxidant activity. Recently, several L. plantarum proteins involved in the metabolism of phenolic compounds have been genetically and biochemically characterized. The aim of this review is to give a complete and updated overview of the current knowledge among LAB and food phenolics interaction, which could facilitate the possible application of selected bacteria or their enzymes in the elaboration of food products with improved characteristics.

Ecological removal of recalcitrant phenolic compounds of treated olive mill wastewater by Pediococcus pentosaceus

Treatment of olive mill wastewater by different biological process led to an important decrease of organic compounds but the black coloration due to the recalcitrant phenolic compounds persists. Experimental design using fractional factorial plan showed that, among the seven studied factors, yeast extract, dilution and glucose exhibited a positive effect on Pediococcus pentosaceus growth and treated olive mill wastewater (TOMW) decolourisation. Optimization of influent factors showed that 2.5 and 1g/l are the suitable concentrations of glucose and yeast extract, respectively. Optimum TOMW decolourisation was reached when TOMW was diluted to 2.5 initial OD390 value. The growth of P. pentosaceus on TOMW led to high molecular weight phenolic compounds removal as shown by the sephadex G-50 chromatogram. Simple phenolic compound removal was also observed. Bacterial growth on TOMW induced an ecological removal of recalcitrant phenolic compounds without chemical sludge production.

Activated sludge-mediated biodegradation of dimethyl phthalate under fermentative conditions

The biodegradation of dimethyl phthalate (DMP) was investigated under fermentative conditions in this study. The nature of the intermediate compounds and the extent of mineralization were probed using high-pressure liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS) methods. The fermentative bacteria were able to biodegrade the DMP under anaerobic conditions, with the biodegradation rate of 0.36 mg DMP/(L x h). The results demonstrated that the DMP degradation under fermentative conditions followed the modified Gompertz model with the correlation coefficient of 0.99. Monomethyl phthalate (MMP) and phthalic acid (PA) were detected as the intermediates of DMP biodegradation. During the experiment, MMP was rapidly produced and removed; however, PA accumulated as the biodegradation was slower throughout the course of the experiment. The COD(Cr) concentration decreased from 245.06 to 72.01 mg/L after the experimental operation of 20 d. The volume of methane produced was 3.65 ml over a period of 20 d and the amount of methane recovered corresponded to 40.2% of the stoichiometric value. The COD(Cr) variation and methane production showed that the DMP could not be completely mineralized under the fermentative conditions, which implied that the fermentative bacteria were not able to biodegrade DMP entirely.

Characterization of tannase activity in cell-free extracts of Lactobacillus plantarum CECT 748T

In foods, tannins are considered nutritionally undesirable. Spectrophotometric methods have been used to detect tannin degradation by L. plantarum strains isolated from food substrates. Enzymatic degradation of tannic acid by L. plantarum CECT 748T was examined in liquid cultures and in cell-free extracts by HPLC. Significative reduction of tannic acid was not observed during incubation in the presence of L. plantarum cells after 7 days incubation. However, tannic acid was effectively degraded by cell-free extracts of L. plantarum during 16 h incubation. We have partially characterized L. plantarum tannase activity by measuring its esterase activity on methyl gallate. Tannase activity was optimal at pH 5.0 and 30 degrees C, and showed nearly 75% of the maximal activity at 50 degrees C. The biochemical characteristics showed by L. plantarum tannase are considered favourable for tannin biodegradation in the food-processing industry.

High-added-value antioxidants obtained from the degradation of wine phenolics by Lactobacillus plantarum

Disposal of the waste from wine production has long been a problem for wineries, mainly because of the presence of phenolic compounds. In this study, we analyzed the antimicrobial activities of 10 wine phenolic compounds against Lactobacillus plantarum strains. Inhibition increased in this order: catechin = gallic acid < epicatechin = salicylic acid < methyl gallate = caffeic acid < ferulic acid = tryptophol < p-coumaric acid. The obtained results indicated that L. plantarum is able to grow in the presence of high concentrations of some wine phenolic compounds. Of the 10 compounds analyzed, only the hydroxycinnamic acids, gallic acid, and methyl gallate were metabolized by the four L. plantarum strains studied. Results also revealed that 4-vinylphenol and 4-vinylguaiacol are originated from p-coumaric and ferulic acids. These phenolic compounds are valuable intermediates in the biotechnological production of new fragrances. In addition, gallic acid and its ester, methyl gallate, are metabolized to produce the powerful antioxidant pyrogallol. Therefore, it might be possible to use L. plantarum strains to obtain high-added-value antioxidants from the degradation of phenolic compounds found in wine wastes.

Olive Mill Wastewater Treatment by a Pilot-Scale Subsurface Horizontal Flow (SSF-h) Constructed Wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.