Production of biodegradable polymer by A. eutrophus using volatile fatty acids from acidified wastewater

Volatile Fatty Acids as Carbon Sources for Polyhydroxyalkanoates Production

Waste of industrial origin produced from synthetic materials are a serious threat to the natural environment. The ending resources of fossil raw materials and increasingly restrictive legal standards for the management of plastic waste have led to research on the use of biopolymers, which, due to their properties, may be an ecological alternative to currently used petrochemical polymers. Polyhydroxyalkanoates (PHAs) have gained much attention in recent years as the next generation of environmentally friendly materials. Currently, a lot of research is being done to reduce the costs of the biological process of PHA synthesis, which is the main factor limiting the production of PHAs on the industrial scale. The volatile fatty acids (VFAs) produced by anaerobic digestion from organic industrial and food waste, and various types of wastewater could be suitable carbon sources for PHA production. Thus, reusing the organic waste, while reducing the future fossil fuel, originated from plastic waste. PHA production from VFAs seem to be a good approach since VFAs composition determines the constituents of PHAs polymer and is of great influence on its properties. In order to reduce the overall costs of PHA production to a more reasonable level, it will be necessary to design a bioprocess that maximizes VFAs production, which will be beneficial for the PHA synthesis. Additionally, a very important factor that affects the profitable production of PHAs from VFAs is the selection of a microbial producer that will effectively synthesize the desired bioproduct. PHA production from VFAs has gained significant interest since VFAs composition determines the constituents of PHA polymer. Thus far, the conversion of VFAs into PHAs using pure bacterial cultures has received little attention, and the majority of studies have used mixed microbial communities for this purpose. This review discusses the current state of knowledge on PHAs synthesized by microorganisms cultured on VFAs.

Biotechnological strategies to improve production of microbial poly-(3-hydroxybutyrate): a review of recent research work

Poly-(3-hydroxybutyrate) [P(3HB)] is a polyester synthesized as a carbon and energy reserve material by a wide number of bacteria. This polymer is characterized by its thermo-plastic properties similar to plastics derived from petrochemical industry, such as polyethylene and polypropylene. Furthermore, P(3HB) is an inert, biocompatible and biodegradable material which has been proposed for several uses in medical and biomedical areas. Currently, only few bacterial species such as Cupriavidus necator, Azohydromonas lata and recombinant Escherichia coli have been successfully used for P(3HB) production at industrial level. Nevertheless, in recent years, several fermentation strategies using other microbial models such as Azotobacter vinelandii, A. chroococcum, as well as some methane-utilizing species, have been developed in order to improve the P(3HB) production and also its mean molecular weight.

From wastewater to bioenergy and biochemicals via two-stage bioconversion processes: a future paradigm

Recovery of bioenergy and biochemicals from wastewater has attracted growing and widespread interests. In this respect, two-stage bioconversion process (TSBP) offers an appealing avenue to achieve stepwise and directional substrate conversion in separated stages. Such a biosystem not only enables enhanced degradation of organics, but also favors a high product yield and quality. Various TSBRs have been developed for the production of methane, hydrogen, electricity, bioplastics, bioflocculants, biopesticides, biosurfactants and other value-added products, demonstrating marked advantages over the conventional one-stage processes. It represents a promising, and likely the sole viable, paradigm for future application. However, there are also many remaining challenges. This paper provides an overview of the various TSBPs, introduces the recent advances, and discusses the major challenges and the future perspectives for practical application.

Biosynthesis of polyhydroxyalkanoate by Gamma proteobacterium WD-3 from volatile fatty acids

The production of copolymers of poly-β-hydroxyalkanoates (PHA) is generally a high cost process. To reduce the production costs, inexpensive carbon sources such as volatile fatty acids (VFAs) from acidified wastewater can be used. Therefore, isolation of bacterial strains that can produce PHA copolymers using VFAs as a sole carbon source would be a beneficial alternative. In this study, a strain of PHA accumulating bacterium was isolated from the wastewater treatment plant of a soybean processing facility in Harbin. The strain was identified as γ-proteobacterium according to its 16S rDNA information and was originally named as strain WD-3. The strain accumulated a mass of PHA up to 45% of its dry cell weight when it was cultured under the optimum fermentation condition in this study when butyrate was used as the carbon source. In addition, WD-3 could synthesize PHA copolymers of poly-hydroxybutyrate and poly-hydroxyvalerate (PHV) either from C-even substrates or from C-odd substrates, and one-third of the copolymer was PHV. Results from this study demonstrated that small molecule organic acids can be used by the strain of WD-3 as the carbon source for growth and PHA production. The maximum PHA yield in the study was 0.45 g g(-1) dry cell.

Two-stage fermentation process for alginate production by Azotobacter vinelandii mutant altered in poly-beta-hydroxybutyrate (PHB) synthesis

AIMS

A two-stage fermentation strategy, based on batch cultures conducted first under non-oxygen-limited conditions, and later under oxygen-limited conditions, was used to improve alginate production by Azotobacter vinelandii (AT6), a strain impaired in poly-beta-hydroxybutyrate (PHB) production.

METHODS AND RESULTS

The use of sucrose as carbon source, as well as a high oxygen concentration (10%), allowed to obtain a maximum biomass concentration of 7.5 g l(-1) in the first stage of cultivation. In the second stage, the cultures were limited by oxygen (oxygen close to 0%) and fed with a sucrose solution at high concentration. Under those conditions, the growth rate decreased considerably and the cells used the carbon source mainly for alginate biosynthesis, obtaining a maximum concentration of 9.5 g l(-1), after 50 h of cultivation.

CONCLUSION

Alginate concentration obtained from the AT6 strain was two times higher than that obtained using the wild-type strain (ATCC 9046) and was the highest reported in the literature. However, the mean molecular mass of the alginate produced in the second stage of the process by the mutant AT6 was lower (400 kDa) than the polymer molecular mass obtained from the cultures developed with the parental strain (950 kDa).

SIGNIFICANCE AND IMPACT OF THE STUDY

The use of a mutant of A. vinelandii impaired in the PHB production in combination with a two-stage fermentation process could be a feasible strategy for the production of alginate at industrial level.