Molecular and crystal structures of two β-bend forming monothiated analogues of melanostatin

Desolvation of Peptide Bond by O to S Substitution Impacts Protein Stability

Amino acid side chains are key to fine-tuning the microenvironment polarity in proteins composed of polar amide bonds. Here, we report that substituting an oxygen atom of the backbone amide bond with sulfur atom desolvates the thioamide bond, thereby increasing its lipophilicity. The impact of such local desolvation by O to S substitution in proteins was tested by synthesizing thioamidated variants of Pin1 WW domain. We observe that a thioamide acts in synergy with nonpolar amino acid side chains to reduce the microenvironment polarity and increase protein stability by more than 14 °C. Through favorable van der Waals and hydrogen bonding interactions, this single atom substitution significantly stabilizes proteins without altering the amino acid sequence and structure of the native protein.

Partial thioamide scan on the lipopeptaibiotic trichogin GA IV. Effects on folding and bioactivity

Backbone modification is a common chemical tool to control the conformation of linear peptides and to explore potentially useful effects on their biochemical and biophysical properties. The thioamide, ψ[CS-NH], group is a nearly isosteric structural mimic of the amide (peptide) functionality. In this paper, we describe the solution synthesis, chemical characterization, preferred conformation, and membrane and biological activities of three, carefully selected, peptide analogues of the lipopeptaibiotic [Leu¹¹-OMe] trichogin GA IV. In each analogue, a single thioamide replacement was incorporated. Sequence positions near the N-terminus, at the center, and near the C-terminus were investigated. Our results indicate that (i) a thioamide linkage is well tolerated in the overall helical conformation of the [Leu¹¹-OMe] lipopeptide analogue and (ii) this backbone modification is compatible with the preservation of its typical membrane leakage and antibiotic properties, although somewhat attenuated.

cis/trans Photoisomerization of Secondary Thiopeptide Bonds

The reversible cis/trans photoisomerization of secondary thiopeptide bonds has been systematically studied with UV-visible absorption, capillary electrophoresis, 1H NMR spectroscopy, and circular dichroism methods. It was found that the concentration of the cis conformers could be increased from less than 1 % in the thermal equilibrated solution to up to 20 % in the photostationary state. The rotational barriers of the thiopeptide bond and the pH dependence of the isomerization rates were also studied. The quantum yields of the trans-->cis and the cis-->trans processes were determined from photokinetic analysis.

Coupling constants and hydrogen bonds as experimental restraints in a distance geometry refinement protocol

A refinement procedure commonly used after distance geometry calculations has been modified to include the use of experimental restraints from coupling constants and hydrogen bonds. Fewer experimental distance constrains (NOEs) are available for peptides as compared to proteins; therefore it is important to incorporate other conformational restraints into refinement methods. The procedure was applied to a cyclic hexapeptide containing two thioamide substitutions, cyclo(-Gly1-Pro2-Phe3 psi [CS-NH]Val4-D-Phe5-Phe6 psi [CS-NH]-). Distance geometry was used to study this peptide, since no potential energy parameters, required in molecular mechanics or dynamics calculations, are available for the thioamide. This is a general problem in the study of peptidomimetics; physiochemical properties of heteroatoms are required within a self-consistent force field. Here, we illustrate the use of metric matrix distance geometry followed by refinement with distance and angle driven dynamics (DADD). We also introduce a new way to handle intramolecular hydrogen bonds by an additional very small and flexible restraint. This method is a viable alternative for the conformational examination of peptides and peptidomimetics. The modifications described here should also find use in the conformational determination of flexible regions of proteins, where the number of NOEs are limited.

Influence on proline-specific enzymes of a substrate containing the thioxoaminoacyl-prolyl peptide bond

Dipeptidyl peptidase IV from porcine kidney and aminopeptidase P from Escherichia coli can utilize thioxoalanyl-proline 4-nitroanilide but with decreased kinetic constants compared to the normal substrates. Product analysis showed that exclusively thioxoalanyl-proline was liberated in the case of dipeptidyl peptidase IV catalysis and thioxo-alanine in the case of aminopeptidase-P-mediated thioxo peptide bond hydrolysis. For the proline-specific aminopeptidase P the kcat/Km value for the thioxo peptide is 1100-fold lower than for the corresponding oxo peptide. This difference is entirely due to kcat. Because the rotation about the thioxo amide bond is about 12.5 kJ mol-1 more difficult than rotation about an amide bond, these data support a mechanism involving rate-limiting rotation about the scissile peptide bond. It was found that the specificity rate constant for the reaction of thioxoalanyl-proline 4-nitroanilide and dipeptidyl peptidase IV is 100-1000-fold lower compared to the corresponding rate constant for alanyl-proline 4-nitroanilide. This remarkable effect is interpreted in terms of a distorted binding of the transition state for the thioxo substrate. The hydrolysis of the thioxo substrate by dipeptidyl peptidase IV is isomer-specific. The conformation about the nonscissile P2-P1 thioxo amide bond has to be in trans for successful cleavage of the scissile peptide bond. We can now directly compare the rotational energy barrier of the prolyl peptide bond for the oxo and the thioxo form.

Unusual thionation of a cyclic hexapeptide. Conformational changes and dynamics

One carbonyl oxygen of the cyclic hexapeptide cyclo(-Gly1-Pro2-Phe3-Val4-Phe5-Phe6-) (A) can be selectively exchanged with sulphur using Yokoyama's reagent. Surprisingly it was not the C=] of Gly1 but that of Phe5 which was substituted and cyclo(-Gly1-Pro2-Phe3-Val4-Phe5 psi [CS-NH]Phe6-) (B) was obtained. Thionation results in a conformational change of the peptide backbone although the C=O of Phe5 and the corresponding C=S are not involved in internal hydrogen bonds. Two isomers in slow exchange, containing a cis Gly1-Pro2 bond in a beta VIa-turn (minor) and a trans Gly-Pro bond in a beta II'-turn (major), were analyzed by restrained molecular dynamics in vacuo and in DMSO as well as using time dependent distance constraints. It is impossible to fit all experimental data to a static structure of each isomer. Interpreting the conflicting NOEs, local segment flexibility is found. MD simulations lead to a dynamic model for each structure with evidence of an equilibrium between a beta I- and beta II-turn about the Val4-Phe5 amide bond in both the cis and trans isomers. Additionally proton relaxation rates in the rotating frame (R1 rho) were measured to verify the assumption of this fast beta I/beta II equilibrium within each isomer. Significant contributions to R1 rho-rates from intramolecular motions were found for both isomers. Therefore it is possible to distinguish between at least four conformers interconverting on different time scales based on NMR data and MD refinement. This work shows that thionation is a useful modification of peptides for conformation-activity investigations.

Backbone modifications in cyclic peptides. Conformational analysis of a cyclic pseudopentapeptide containing a thiomethylene ether amide bond replacement

NMR and X-ray crystallographic studies have shown that cyclic pentapeptides of the general structure cyclo(D-Xxx-Pro-Gly-Pro-Gly) possess beta- and gamma-turn intramolecular hydrogen bonds. As part of our continuing series surveying the compatibility of various amide bond replacements on peptide structure, we have synthesized cyclo(D-Phe-Pro psi[CH2S]Gly-Pro-Gly). The pseudopeptide was prepared by solid phase methods and cleaved from the resin by a new procedure involving phase transfer catalysis using K2CO3 and tetrabutylammonium hydrogen sulfate. Cyclization was carried out with the use of DPPA, HOBt, and DMAP to afford the product in 69% yield. The conformational behavior of the pseudopeptide was analyzed by 1H and 13C (1D and 2D) NMR techniques. The backbone modification replaced the amide bond that is involved in a gamma-turn intramolecular hydrogen bond in the all-amide structure. In CDCl3, the pseudopeptide adopted the same all-trans conformation as its parent, although the remaining beta-turn hydrogen bond was weaker according to delta delta/delta TNH measurements. In DMSO-d6, the all-trans conformer and a second conformer were observed in a ratio of 55:45. These conformers, which slowly interconverted on the NMR time scale, could be separately assigned; peaks due to chemical exchange were readily distinguishable by the ROESY technique as reported earlier by others. 13C and ROESY experiments suggested the minor conformer contained one cis amide bond at the Gly1-Pro2 position. Thus, both the location and type of amide surrogate are important determinants affecting the compatibility of the replacement with a particular conformational feature.

Intramolecular H-bonds and thioamide rotational isomerism in thiopeptides

Mono- and dithionated N-acyl amino acid and dipeptide N'-methylamides were synthesized using Lawesson's reagent and S-thioacetyl thioglycolic acid. The conformation of the thionated models was characterized by IR, 13C, and 1H NMR spectroscopy, including NOE experiments. The formation of -C = S...H-N-C = X (X = O or S) intramolecular H-bonds of the type 2----2, 1----3 and 1----4 was evidenced by the characteristic shifts of the IR stretching frequencies of the NH group. Act-Pro-NHCH3(4) and Act-Prot-NHCH3(5) were found to be present as mixtures of rotational isomers about the CS-N bond. 13C chemical shifts of the gamma- and beta-carbons of the proline ring elucidated the conformation (Z or E) of the tertiary thioamide group. Our results suggest that the conformation of thiopeptides is determined by two factors: 1) the H-bond donating and accepting ability of the thioamide group and 2) the repulsion between the thiocarbonyl sulfur atom and the side chain groups of the neighbouring amino acid residues.

Biological activities of cyclic enkephalin pseudopeptides containing thioamides as amide bond replacements

Analogs of H-Tyr-cyclo(N epsilon-D-Lys-Gly-Phe-Leu) have been prepared which contain thioamides at the 3-4 position (monothio), 3-4 and 5-2 positions (dithio), and 2-3, 3-4, and 5-2 positions (trithio). These compounds have been tested for opioid activity in mu- and delta-receptor selective bio- and binding assays. As the number of sulfurs increased, the biological activities dropped on the guinea pig ileum and fluctuated modestly on the mouse vas deferens assay. Surprisingly, the compounds displayed increasing delta selectivity as the number of sulfurs increased. In the binding assay, the thioamide analogs tended to retain affinity toward the mu receptor. The mono- and dithio-analogs were more mu selective than the parent, while the trithio-analog was more delta selective. These results suggest that the subtle exchange of sulfur for oxygen can have a significant impact on receptor selectivity and affinity, and probably reflect the different conformation/structural requirements for binding vs. the biological transduction event.

Structure of conformationally constrained peptides: from model compounds to bioactive peptides

The use of backbone conformational constraints has acquired increasing importance in the design and synthesis of structurally restricted agonists and antagonists of bioactive peptides. Here I discuss the preferred conformations of four among the most popular types of such peptide surrogates: (a) Peptides from C alpha, alpha-dialkylated residues, (b) tetrazolyl peptides, (c) (gamma- and delta-) lactam-containing peptides, and (d) thiated peptides. Emphasis is given to conformational energy computations and x-ray diffraction analyses of selected model compounds and analogues of small bioactive peptides such as the formylmethionyl tripeptide chemoattractant and MIF.

X-ray crystallography of peptides: the contributions of the Italian laboratories

The review article summarizes the most relevant solid state structural and conformational results obtained in the laboratories involved in Italy in the studies of synthetic and natural peptides by x-ray diffraction analyses. Some of the topics will include research studies carried out in other European countries, whereas in other cases studies carried out in Italy will be included in other review articles included in this volume. The review deals with peptides containing symmetrically achiral and unsymmetrically chiral C alpha,alpha-dialkylated glycine residues, peptides containing beta-alanine residues, alpha,beta-dehydroamino acid residues, and aminosuccinyl residues, peptides containing the thioamide surrogate, heterochiral peptides and several bioactive peptides systems with the proposed relationships between function and structure.