Synthesis of ‘head-to-tail’ cyclized peptides on solid support by Fmoc chemistry

Three Methods for Peptide Cyclization Via Lactamization

Lactamization is the key step in the synthesis of many compounds with macrocyclic structure. As the interest for these types of molecules grows in various fields such as drug discovery and nanomaterials, different methodologies to access them are being developed. Three different strategies to obtain cyclic peptides via lactamization are described in this chapter: solution-phase macrocyclization following solid-phase peptide synthesis (SPPS) of the linear precursor, SPPS and on-resin cyclization on the 2-chlorotrityl chloride (2-CTC) resin, and SPPS and on-resin cyclization by native chemical ligation on the amino-PEGA resin.

Automated Solid-Phase Peptide Synthesis

The development of solid-phase peptide synthesis by Bruce Merrifield paved the way for a synthesis carried out by machines. Automated peptide synthesis is a fast and convenient way of synthesizing many peptides simultaneously. This chapter tries to give a general guidance for the development of synthesis protocols for the peptide synthesizer. It also provides some suggestions for the modification of the synthesized peptides. Additionally, many examples of possible challenges during and after the synthesis are given in order to support the reader in finding the best synthesis strategy. Numerous references are given to many of the described matters.

Synthesis of novel cyclopeptides containing heterocyclic skeletons

Cyclopeptides can be considered as naturally biologically active compounds. Over the last several decades, many attempts have been made to synthesize complex naturally occurring cyclopeptides, and great progress has been achieved to advance the field of total synthesis. Moreover, cyclopeptides containing heterocyclic skeletons have been recently developed into powerful reactions and approaches. This review aims to highlight recent advances in the synthesis of cyclopeptides containing heterocyclic skeletons such as triazole, oxazole, thiazole, and tetrazole.

Synthesis of Cyclic Peptides as Potential Anti-Malarials

The results from the synthesis of peptides by Fmoc/SPPS on a 2-CTC resin and then lactamization in solution or solid phase for the preparation of cyclopeptides are presented. Both procedures allow the synthesis of the desired compounds in good to very good yield and with high cyclization efficiency for on-resin macrocyclization. In addition, the activities of the corresponding cyclopeptides against the chloroquine-resistant K1 strain of Plasmodium falciparum were evaluated. Cyclo-Cys(Trt)-Gly-Thr( ^tBu)-Gly-Cys(Trt)-Gly showed potent in vitro and selective activity against this parasite, EC₅₀ = 28 nM.

Total Synthesis and Functional Evaluation of Fourteen Derivatives of Lysocin E: Importance of Cationic, Hydrophobic, and Aromatic Moieties for Antibacterial Activity

Lysocin E (1) is a structurally complex 37-membered depsipeptide comprising 12 amino-acid residues with an N-methylated amide and an ester linkage. Compound 1 binds to menaquinone (MK) in the bacterial membrane to exert its potent bactericidal activity. To decipher the biologically important functionalities within this unique antibiotic, we performed a comprehensive structure-activity relationship (SAR) study by systematically changing the side-chain structures of l-Thr-1, d-Arg-2, N-Me-d-Phe-5, d-Arg-7, l-Glu-8, and d-Trp-10. First, we achieved total synthesis of the 14 new side-chain analogues of 1 by employing a solid-phase strategy. We then evaluated the MK-dependent liposomal disruption and antimicrobial activity against Staphylococcus aureus by 1 and its analogues. Correlating data between the liposome and bacteria experiments revealed that membrane lysis was mainly responsible for the antibacterial functions. Altering the cationic guanidine moiety of d-Arg-2/7 to a neutral amide, and the C7-acyl group of l-Thr-1 to the C2 or C11 counterpart decreased the antimicrobial activities four- or eight-fold. More drastically, chemical mutation of d-Trp-10 to d-Ala-10 totally abolished the bioactivities. These important findings led us to propose the biological roles of the side-chain functionalities.

Structure activity relationship study on the peptide hormone preptin, a novel bone-anabolic agent for the treatment of osteoporosis

Preptin is a 34-residue pancreatic hormone shown to be anabolic to bone in vitro and in vivo. The bone activity of preptin resides within the (1-16) N-terminal fragment. Due to its peptidic nature, the truncated fragment of preptin is enzymatically unstable; however it provides an attractive framework for the creation of stable analogues using various peptidomimetic techniques. An alanine scan of preptin (1-16) was undertaken which showed that substitution of Ser at position 3 or Pro at position 14 did not inhibit the proliferative activity of preptin in primary rat osteoblasts (bone-forming cells). Importantly, Ser-3 to Ala substitution also showed a significant activity on osteoblast differentiation in vitro and increased the formation of mineralised bone matrix. Additional modifications with non-proteinogenic amino acids at position 3 improved the stability in liver microsomes, but diminished the osteoblast proliferative activity. In addition, to provide greater structural diversity, a series of macrocyclic preptin (1-16) analogues was synthesised using head-to-tail and head-to-side chain macrolactamisation as well as ring-closing metathesis. However, a detrimental effect on osteoblast activity was observed upon macrocyclisation.

Diminished oligomerization in the synthesis of new anti-angiogenic cyclic peptide using solution instead of solid-phase cyclization

The design and synthesis of novel peptides that inhibit angiogenesis is an important area for anti-angiogenic drug development. Cyclic and small peptides present several advantages for therapeutic application, including stability, solubility, increased bio-availability and lack of immune response in the host cell. We describe here the synthesis and biological evaluations of a new cyclic peptide analog of CBO-P11: cyclo(RIKPHE), designated herein as CBO-P23M, a hexamer peptide encompassing residues 82 to 86 of VEGF which are involved in the interaction with VEGF receptor-2. CBO-P23M was prepared using in solution cyclization, therefore reducing the peptide cyclodimerization occurred during solid-phase cyclization. The cyclic dimer of CBO-P23M, which was obtained as the main side product during synthesis of the corresponding monomer, was also isolated and investigated. Both peptides markedly reduce VEGF-A-induced phosphorylation of VEGFR-2 and Erk1/2. Moreover, they exhibit anti-angiogenic activity in an in vitro morphogenesis study. Therefore CBO-P23M and CBO-P23M dimer appear as attractive candidates for the development of novel angiogenesis inhibitors for the treatment of cancer and other angiogenesis-related diseases. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 368-375, 2016.

Azide-rich peptides via an on-resin diazotransfer reaction

Azide-containing amino acids are valuable building blocks in peptide chemistry, because azides are robust partners in several bioorthogonal reactions. Replacing polar amino acids with apolar, azide-containing amino acids in solid-phase peptide synthesis can be tricky, especially when multiple azide residues are to be introduced in the amino acid sequence. We present a strategy for effectively incorporating multiple azide-containing residues site-specifically.

Solid-phase peptide synthesis (SPPS), C-terminal vs. side-chain anchoring: a reality or a myth

Here we review the strategies for the solid-phase synthesis of peptides starting from the side chain of the C-terminal amino acid. Furthermore, we provide experimental data to support that C-terminal and side-chain syntheses give similar results in terms of purity. However, the stability of the two bonds that anchor the peptide to the polymer may determine the overall yield and this should be considered for the large-scale production of peptides. In addition, resins/linkers which do not subject to side reactions can be preferred for some peptides.

Synthesis and properties of cyclic gomesin and analogues

Gomesin (Gm) was the first antimicrobial peptide (AMP) isolated from the hemocytes of a spider, the Brazilian mygalomorph Acanthoscurria gomesiana. We have been studying the properties of this interesting AMP, which also displays anticancer, antimalarial, anticryptococcal and anti-Leishmania activities. In the present study, the total syntheses of backbone-cyclized analogues of Gm (two disulfide bonds), [Cys(Acm)(2,15)]-Gm (one disulfide bond) and [Thr(2,6,11,15),(D)-Pro(9)]-Gm (no disulfide bonds) were accomplished, and the impact of cyclization on their properties was examined. The consequence of simultaneous deletion of pGlu(1) and Arg(16) -Glu-Arg(18) -NH(2) on Gm antimicrobial activity and structure was also analyzed. The results obtained showed that the synthetic route that includes peptide backbone cyclization on resin was advantageous and that a combination of 20% DMSO/NMP, EDC/HOBt, 60 °C and conventional heating appears to be particularly suitable for backbone cyclization of bioactive peptides. The biological properties of the Gm analogues clearly revealed that the N-terminal amino acid pGlu(1) and the amidated C-terminal tripeptide Arg(16) -Glu-Arg(18) -NH(2) play a major role in the interaction of Gm with the target membranes. Moreover, backbone cyclization practically did not affect the stability of the peptides in human serum; it also did not affect or enhanced hemolytic activity, but induced selectivity and, in some cases, discrete enhancements of antimicrobial activity and salt tolerance. Because of its high therapeutic index, easy synthesis and lower cost, the [Thr(2,6,11,15),(D)-Pro(9)]-Gm analogue remains the best active Gm-derived AMP developed so far; nevertheless, its elevated instability in human serum may limit its therapeutic potential.

A general synthesis of dirhodium metallopeptides as MDM2 ligands

A synthesis of multifunctional dirhodium metallopeptide ligands for MDM2 is presented. An orthogonal protection scheme of palladium-catalyzed de-allylation on a metallopeptide substrate allows specific dirhodium incorporation in a complex peptide. Sequence effects on MDM2 binding are discussed.

Design and synthesis of novel hybrid benzamide-peptide histone deacetylase inhibitors

We designed and synthesized a series of novel hybrid histone deacetylase inhibitors based on conjugation of benzamide-type inhibitors with either linear or cyclic peptides. Linear tetrapeptides (compounds 13 and 14), cyclic tetrapeptides (compounds 1 and 11), and heptanediamide-peptide conjugates (compounds 10, 12, 15 and 16) were synthesized through on-resin solid-phase peptide synthesis (SPPS). All compounds were found to be moderate HDAC1 and HDAC3 inhibitors, with IC(50) values ranging from 1.3 microM to 532 microM. Interestingly, compound 15 showed 19-fold selectivity for HDAC3 versus HDAC1.

Highly regioselective synthesis of a 3-O-sulfonated arabino Lewisa asparagine building block suitable for glycopeptide synthesis

Using the stannylene method, the trisaccharide 2-acetamido-3-O-[6-O-benzyl-beta-D-galactopyranosyl]-4-O-[2,3,4-tri-O-benzyl-beta-D-arabinopyranosyl]-6-O-benzyl-2-deoxy-beta-D-glucopyranosyl azide was regioselectively sulfonated and, after reduction of the anomeric azide, coupled to Fmoc alpha-allyl aspartate. After Pd(0)-catalyzed deallylation, the sulfatyl Lewis(a) asparagine building block was obtained, suitable for solid-phase glycopeptide synthesis applying the fluoride labile PTMSEL linker system.

On-bead synthesis and binding assay of chemoselectively template-assembled multivalent neoglycopeptides

The investigation of recognition events between carbohydrates and proteins, especially the control of how spatial factors and binding avidity are correlated in, remains a great interest for glycomics. Therefore, the development of efficient methods for the rapid evaluation of new ligands such as multivalent glycoconjugates is essential for diverse diagnostic or therapeutic applications. In this paper we describe the synthesis of chemoselectively-assembled multivalent neoglycopeptides and the subsequent recognition assay on a solid support. Aminooxylated carbohydrates (betaLac-ONH(2) 4, alphaGalNAc-ONH(2) 9 and alphaMan-ONH(2) 13) have been prepared as carbohydrate-based recognition elements and assembled as clusters onto a cyclopeptidic scaffold by an oxime-based strategy in solid phase. Further binding tests between lectins and beads of resin derivatized with neoglycopeptides displaying clustered lactoses, N-acetylgalactoses and mannoses (18-20) have shown specific recognition and enhanced affinity through multivalent interactions, suggesting that the local density of carbohydrate-based ligands at the bead surface is crucial to improve the interaction of proteins of weak binding affinity. This solid phase strategy involving both molecular assembly and biological screening provides a rapid and efficient tool for various applications in glycomics.

Cyclic β-Tetra- and Pentapeptides: Synthesis through On-Resin Cyclization and Conformational Studies by X-Ray, NMR and CD Spectroscopy and Theoretical Calculations

The solution-phase synthesis of the simplest cyclic beta-tetrapeptide, cyclo(beta-Ala)4 (4), as well as the solid-phase syntheses through side chain anchoring and on-resin cyclization of the cyclic beta3-tetrapeptide cyclo(-beta3hPhe-beta3hLeu-beta3hLys-beta3hGln-) (14) and the first cyclic beta3-pentapeptide cyclo(-beta3hVal-beta3hPhe-beta3hLeu-beta3hLys-beta3hLys-) (19) are reported. Extensive computational as well as spectroscopic studies, including X-ray and NMR spectroscopy, were undertaken to determine the preferred conformations of these unnatural oligomers in solution and in the solid state. cyclo(beta-Ala)4 (4) with no chiral side chains is shown to exist as a mixture of rapidly interchanging conformers in solution, whereas inclusion of chiral side chains in the cyclo-beta3-tetrapeptide causes stabilization of one dominating conformer. The cyclic beta3-pentapeptide on the other hand shows larger conformational freedom. The X-ray structure of achiral cyclo(beta-Ala)4 (4) displays a Ci-symmetrical 16-membered ring with adjacent C=O and N-H atoms pointing pair wise up and down with respect to the ring plane. CD spectroscopic examinations of all cyclic beta-peptides were undertaken and revealed results valuable as starting point for further structural investigations of these entities.

Selective tert-Butyl Ester Deprotection in the Presence of Acid Labile Protecting Groups with Use of ZnBr2

Chemoselective hydrolysis of tert-butyl esters in the presence of other acid-labile groups has been explored by employing alpha-amino esters and ZnBr(2) in DCM. Although N-Boc and N-trityl groups were found to be labile, PhF protected amines were compatible with these Lewis acid deprotection conditions such that a variety of N-(PhF)amino acids were prepared in good yields from their corresponding tert-butyl esters.

On-Resin Native Chemical Ligation for Cyclic Peptide Synthesis1,2

A novel cysteine derivative, N(alpha)-trityl-S-(9H-xanthen-9-yl)-l-cysteine [Trt-Cys(Xan)-OH] has been introduced for peptide synthesis, specifically for application to a new strategy for the preparation of cyclic peptides. The following steps were carried out to synthesize the cyclic model peptide cyclo(Cys-Thr-Abu-Gly-Gly-Ala-Arg-Pro-Asp-Phe): (i). side-chain anchoring of Fmoc-Asp-OAl via its free beta-carboxyl as a p-alkoxybenzyl ester to a solid support; (ii). stepwise chain elongation of the peptide by standard Fmoc/tBu solid-phase chemistry; (iii). removal of the N-terminal Fmoc group; (iv). coupling of Trt-Cys(Xan)-OH; (v). selective Pd(0)-promoted cleavage of the C-terminal allyl ester; (vi). coupling of the C-terminal residue, i.e., H-Phe-SBzl, preactivated as a thioester; (vii). selective removal of the N(alpha)-Trt and S-Xan protecting groups under very mild acid conditions; (viii). on-resin cyclization by native chemical ligation in an aqueous milieu; and (ix). final acidolytic cleavage of the cyclic peptide from the resin. The strategy was evaluated for three supports: poly[N,N-dimethacrylamide-co-poly(ethylene glycol)] (PEGA), cross-linked ethoxylate acrylate resin (CLEAR), and poly(ethylene glycol)-polystyrene (PEG-PS) graft resin supports. For PEGA and CLEAR, the desired cyclic product was obtained in 76-86% overall yield with initial purities of approximately 70%, whereas for PEG-PS (which does not swell nearly as well in water), results were inferior. Solid-phase native chemical ligation/cyclization methodology appears to have advantages of convenience and specificity, which make it promising for further generalization.

Expected and unexpected results from combined β-hairpin design elements

A model beta-hairpin dodecapeptide [EFGWVpGKWTIK] was designed by including a favorable D-ProGly Type II' beta-turn sequence and a Trp-zip interaction, while also incorporating a beta-strand unfavorable glycine residue in the N-terminal strand. This peptide is highly folded and monomeric in aqueous solution as determined by combined analysis with circular dichroism and 1H NMR spectroscopy. A peptide representing the folded conformation of the model beta-hairpin [cyclic(EFGWVpGKWTIKpG)] and a linear peptide representing the unfolded conformation [EFGWVPGKWTIK] yield unexpected relative deviations between the CD and 1H NMR spectroscopic results that are attributed to variations in the packing interactions of the aromatic side chains. Mutational analysis of the model beta-hairpin indicates that the Trp-zip interaction favors folding and stability relative to an alternate hydrophobic cluster between Trp and Tyr residues [EFGYVpGKWTIK]. The significance of select diagonal interactions in the model beta-hairpin was tested by rearranging the cross-strand hydrophobic interactions to provide a folded peptide [EWFGIpGKTYWK] displaying evidence of an unusual backbone conformation at the hydrophobic cluster. This unusual conformation does not appear to be a result of the glycine residue in the beta-strand, as replacement with a serine results in a peptide [EWFSIpGKTYWK] with a similar and seemingly characteristic CD spectrum. However, an alternate arrangement of hydrophobic residues with a Trp-zip interaction in a similar position to the parent beta-hairpin [EGFWVpGKWITK] results in a folded beta-hairpin conformation. The differences between side chain packing of these peptides precludes meaningful thermodynamic analysis and illustrates the caution necessary when interpreting beta-hairpin folding thermodynamics that are driven, at least in part, by aromatic cross strand interactions.

Synthesis, conformational analysis and biological activity of cyclic analogs of the octadecaneuropeptide ODN. Design of a potent endozepine antagonist

The octadecaneuropeptide (ODN; QATVGDVNTDRPGLLDLK) and its C-terminal octapeptide (OP; RPGLLDLK), which exert anxiogenic activity, have been previously shown to increase intracellular calcium concentration ([Ca2+]i) in cultured rat astrocytes through activation of a metabotropic receptor positively coupled to phospholipase C. It has also been found that the [d-Leu5]OP analog possesses a weak antagonistic activity. The aim of the present study was to synthesize and characterize cyclic analogs of OP and [d-Leu5]OP. On-resin homodetic backbone cyclization of OP yielded an analog, cyclo1-8 OP, which was three times more potent and 1.4-times more efficacious than OP to increase [Ca2+]i in cultured rat astrocytes. Cyclo1-8 OP also mimicked the effect of both OP and ODN on polyphosphoinositide turnover. Conversely, the cyclo1-8 [d-Leu5]OP analog was totally devoid of agonistic activity but suppressed the effect of OP and ODN on [Ca2+]i and phosphoinositide metabolism in astrocytes. The structure of these cyclic analogs has been determined by two-dimensional 1H-NMR and molecular dynamics. Cyclo1-8 OP exhibited a single conformation characterized by a gamma turn comprising residues Pro2-Leu4 and a type III beta turn encompassing residues Leu5-Lys8. Cyclo1-8 [d-Leu5]OP was present as two equimolar conformers resulting from cis/trans isomerization of the Arg-Pro peptide bond. These pharmacological and structural data should prove useful for the rational design of non peptidic ODN analogs.

Synthesis of phakellistatin 11: a micronesia (Chuuk) marine sponge cyclooctapeptide

The cyclic octapeptide phakellistatin 11 (1), a constituent of The Federated States of Micronesia (Chuuk) marine sponge Phakellia sp., was synthesized using solid-phase techniques. An initial solution-phase synthesis proved to be inadequate owing to spontaneous deprotection of the Fmoc group at the heptapeptide stage. Using the PAL resin attachment and proceeding from Fmoc-Glu-alpha-allyl ester, linear elongation of the octapeptide was performed until the final unit Pro was added. The allyl ester was removed using Pd(0)[P(C(6)H(5))(3)](4). Cleavage of the final Fmoc group and cyclization with PyAOP provided phakellistatin 11 (1) in 17% overall yield. The synthetic specimen of phakellistatin 11 (1) was found to be chemically but not biologically (cancer cell lines) identical to the natural product. The result suggested a conformational difference or more likely the presence of a trace amount of a highly active antineoplastic agent that binds noncovalently to the natural cyclic octapeptide 1.

Preparation of 'side-chain-to-side-chain' cyclic peptides by Allyl and Alloc strategy: potential for library synthesis

Automated and manual deprotection methods for allyl/allyloxycarbonyl (Allyl/Alloc) were evaluated for the preparation of side-chain-to-side-chain cyclic peptides. Using a standard Allyl/Alloc deprotection method, a small library of cyclic peptides with lactam bridges (with seven amino acids) was prepared on an automatic peptide synthesizer. We demonstrate that the Guibe method for removing Allyl/Alloc protecting groups under specific neutral conditions [Pd(PPh3)4/PhSiH3)/DCM] can be a useful, efficient and reliable method for preparing long cyclic peptides on a resin. We have also manually synthesized a cyclic glucagon analogue containing 24 amino acid residues. These results demonstrated that properly controlled palladium-mediated deprotection of Allyl/Alloc protecting groups can be used to prepare cyclic peptides on the resin using an automated peptide synthesizer and cyclic peptides with a long chain.

Rapid, high-yield, solid-phase synthesis of the antitumor antibiotic sansalvamide A using a side-chain-tethered phenylalanine building block

A 10-step solid-phase synthesis of the cytotoxic depsipeptide sansalvamide A (1) has been accomplished in an overall yield of 67% with >95% purity employing polymer-bound phenylalanine building block 2. Both the N- and C-termini of 2 are extended followed by on-resin head-to-tail macrocyclization of the linear peptide in a high yield. This should be a general stategy for the synthesis of diverse libraries of cyclic peptides and depsipeptides that contain exclusively phenylalanine and other hydrophobic side chains.

Total synthesis and revision of stereochemistry of the marine metabolite trunkamide A

The isolation of the cytotoxic Lissoclinum sp. metabolite trunkamide A was reported in 1996. After completion of a total synthesis in 1999, it became clear that the structure of this marine natural product had to be revised. We now report the first preparation of actual trunkamide A in a total synthesis that serves as an unambiguous structural and stereochemical proof. Highlights of our synthetic strategy are a Lewis acid assisted aziridine opening that was used for the preparation of the novel reverse-prenylated serine and threonine side chains as well as an efficient oxazoline-thiazoline interconversion on the macrocyclic skeleton. In addition, several stereoisomers prepared by complementary synthetic protocols serve to illustrate the general scope of our methodology and confirm the configurational assignment.

Traceless solid-phase synthesis of chiral 3-aryl beta-amino acid containing peptides using a side-chain-tethered beta-amino acid building block

[reaction: see text] A general method for the attachment of a chiral aromatic side-chain-containing beta-amino acid to a polymer support using a traceless silyl linkage strategy has been developed. Using this building block, solid-phase synthesis was carried out to obtain tripeptide analogues with the aromatic ring either unsubstituted or halogenated (Br, I) at the position of the silyl group. The building blocks could generate libraries of peptidomimetics or cyclic peptides containing beta-amino acids with nonpolar side chains.

Selectively 2H-labeled Glu/Asp: application to pKa measurements in Abeta amyloid peptides

Human Abeta peptides have been linked to Alzheimer's disease, and it is hypothesized that formation of amyloid as well as neurotoxicity are important events in the etiology of the disease. Previous studies have shown that the soluble precursor to Alzheimer's amyloid undergoes a pH-dependent folding transition as the self-assembly activity appears, and based upon inter-residue proximities, it was suspected that stabilization of the soluble form might rely upon formation of an intramolecular salt-bridge. However, pKa studies on a model 17-residue Abeta fragment supported an electrostatic model where a solvation imperative for charged side-chain atoms drives the folding process. To explore this model in an active 26-residue fragment as well as the full-length 40-residue Abeta peptide, pKa measurements were performed via 1H and 2H NMR. To overcome issues related to sensitivity and spin system degeneracy, specifically deuterated allyl protected-Fmoc amino acids were synthesized for incorporation into a series of peptides, and a high sensitivity 2H observe NMR probe was constructed.

Synthesis of the marine sponge cycloheptapeptide phakellistatin 5(1)

Phakellistatin 5 (1), a constituent of The Federated States of Micronesia (Chuuk) marine sponge Phakellia costada, was synthesized by solution-phase and solid-phase techniques. Because the linear peptide bearing (R)-Asn resisted cyclization, the synthesis of this peptide was repeated using the PAL resin attachment proceeding from N-Fmoc-D-Asp-alpha-OCH(2)CH=CH(2). After addition of the final unit (Ala), the allyl ester was removed under neutral conditions with Pd(o) [P(C(6)H(5))(3)](4). Removal of the final Fmoc-protecting group and cyclization with PyAOP provided (R)-Asn-phakellistatin 5 (2) in 28% overall yield. The same synthetic route from (S)-Asp led to natural phakellistatin 5 (1) in 15% overall recovery. The solution-phase and solid-phase synthetic products derived from (S)-Asp were found to be chemically but not biologically identical with natural phakellistatin 5 (1). This important fact suggested that a trace, albeit highly cancer-cell growth inhibitory, constituent accompanied the natural product or that there is a subtle conformational difference between the synthetic and natural cyclic peptides.