Imprinting of amino acid derivatives in macroporous polymers

Recent advances in molecularly imprinted polymer-based electrochemical sensors

Molecularly imprinted polymers (MIPs) are the equivalent of natural antibodies and have been widely used as synthetic receptors for the detection of disease biomarkers. Benefiting from their excellent chemical and physical stability, low-cost, relative ease of production, reusability, and high selectivity, MIP-based electrochemical sensors have attracted great interest in disease diagnosis and demonstrated superiority over other biosensing techniques. Here we compare various types of MIP-based electrochemical sensors with different working principles. We then evaluate the state-of-the-art achievements of the MIP-based electrochemical sensors for the detection of different biomarkers, including nucleic acids, proteins, saccharides, lipids, and other small molecules. The limitations, which prevent its successful translation into practical clinical settings, are outlined together with the potential solutions. At the end, we share our vision of the evolution of MIP-based electrochemical sensors with an outlook on the future of this promising biosensing technology.

Ion-imprinted chitosan prepared without cross-linking agent for efficient selective adsorption of Al(III) from rare earth solution

In the aqueous phase, ion-imprinted materials exhibit excellent selective adsorption properties for specific ions, but their complicated preparation process and large amount of crosslinker consumption limit their application. In this study, ion-imprinted chitosan (IIP-CS) was prepared by a simple one-step hydrothermal method without a cross-linking agent for the efficient adsorption of trace amounts of Al(III) from a rare earth solution. The structures and morphology of IIP-CS were analyzed by FT-IR, SEM, and XRD. The Al(III) adsorption characteristics of IIP-CS were investigated under various preparation processes and adsorption conditions. It was found that the optimum mass ratio of IIP-CS is 3 : 1 and pH is 3 and the adsorption capacity reaches up to 40.36 mg g-1. In addition, three different isothermal models-Temkin, Freundlich, and Langmuir-were used to analyze the equilibrium adsorption of IIP-CS in aqueous solution. The results obtained are consistent with the Langmuir model. The adsorption process of Al(III) on IIP-CS follows a pseudo-secondary kinetic model, suggesting that electron sharing or exchange between IIP-CS and Al(III) is a key factor affecting its adsorption rate. IIP-CS shows high selectivity coefficients for Al(III) in mixtures of La(III), Y(III), and Gd(III), which are 792.50, 163.26, and 55.16, respectively. The mechanism of action is the formation of a complex via amidation between Al(III) and IIP-CS. IIP-CS is an adsorbent with excellent regeneration and selective adsorption performance in aqueous solution.

Elucidation of the Binding Orientation in α2,3- and α2,6-Linked Neu5Ac-Gal Epitopes toward a Hydrophilic Molecularly Imprinted Monolith

N-Acetylneuraminic acid and its α2,3/α2,6-glycosidic linkages with galactose (Neu5Ac-Gal) are major carbohydrate antigen epitopes expressed in various pathological processes, such as cancer, influenza, and SARS-CoV-2. We here report a strategy for the synthesis and binding investigation of molecularly imprinted polymers (MIPs) toward α2,3 and α2,6 conformations of Neu5Ac-Gal antigens. Hydrophilic imprinted monoliths were synthesized from melamine monomer in the presence of four different templates, namely, N-acetylneuraminic acid (Neu5Ac), N-acetylneuraminic acid methyl ester (Neu5Ac-M), 3'-sialyllactose (3SL), and 6'-sialyllactose (6SL), in a tertiary solvent mixture at temperatures varying from -20 to +80 °C. The MIPs prepared at cryotemperatures showed a preferential affinity for the α2,6 linkage sequence of 6SL, with an imprinting factor of 2.21, whereas the α2,3 linkage sequence of 3SL resulted in nonspecific binding to the polymer scaffold. The preferable affinity for the α2,6 conformation of Neu5Ac-Gal was evident also when challenged by a mixture of other mono- and disaccharides in an aqueous test mixture. The use of saturation transfer difference nuclear magnetic resonance (STD-NMR) on suspensions of crushed monoliths allowed for directional interactions between the α2,3/α2,6 linkage sequences on their corresponding MIPs to be revealed. The Neu5Ac epitope, containing acetyl and polyalcohol moieties, was the major contributor to the sequence recognition for Neu5Ac(α2,6)Gal(β1,4)Glc, whereas contributions from the Gal and Glc segments were substantially lower.

In Silico Evaluation of Oligomeric Representations for Molecularly Imprinted Polymer Modeling Using a Biological Template

Molecularly imprinted polymers (MIPs) have significant relevance to analytical sensing due to their functionalized and template-specific structurally complementary cavities, providing increased sensibility and specificity for instrumental analyses, thereby enabling a wide variety of applications, especially for biological processes. Designing and developing MIPs entirely by experimental approaches are time-consuming and costly processes; thus, computational tools are used to assess some of the most critical parameters for imprinting, such as ligand screening. A typical practice is to model functional ligands as monomers; however, this representation fails to predict how ligand-template interactions evolve during polymer growth. In this context, this work aims to evaluate whether additional oligomeric representations affect the formation of noncovalent complexes between typical ligands and the P31 Asian lineage Zika virus epitope, using classical molecular dynamics. The ligands 2-vinylpyridine, 4-vinylaniline, acrylic acid, acrylamide, and 2-hidroxyethyl methacrylate were simulated as monomers, trimers, pentamers, and decamers, and their influence on the epitope structural conservation and ligand-template interactions were evaluated. Analyses of root-mean-square deviation, fluctuation, radius of gyration, pair correlation function, and number of hydrogen bonding-type interactions were conducted, showing the ligand chain size had an influence on the complex formation. However, this influence had no discernible pattern, exhibiting better performance in some cases while noninfluential in others. Of particular significance, in terms of epitope structural conservation, distinct oligomeric chains led to the selection of the distinct most interactive ligands. This observation raises important questions regarding the use of oligomeric chains in MIP simulations, thus prompting the need for further investigations of this subject.

Electrochemical sensors for cortisol detection: Principles, designs, fabrication, and characterisation

Psychological stress is a major factor contributing to health discrepancies among individuals. Sustained exposure to stress triggers signalling pathways in the brain, which leading to the release of stress hormones in the body. Cortisol, a steroid hormone, is a significant biomarker for stress management due to its responsibility in the body's reply to stress. The release of cortisol in bloodstream prepares the body for a "fight or flight" response by increasing heart rate, blood pressure, metabolism, and suppressing the immune system. Detecting cortisol in biological samples is crucial for understanding its role in stress and personalized healthcare. Traditional techniques for cortisol detection have limitations, prompting researchers to explore alternative strategies. Electrochemical sensing has emerged as a reliable method for point-of-care (POC) cortisol detection. This review focuses on the progress made in electrochemical sensors for cortisol detection, covering their design, principle, and electroanalytical methodologies. The analytical performance of these sensors is also analysed and summarized. Despite significant advancements, the development of electrochemical cortisol sensors faces challenges such as biofouling, sample preparation, sensitivity, flexibility, stability, and recognition layer performance. Therefore, the need to develop more sensitive electrodes and materials is emphasized. Finally, we discussed the potential strategies for electrode design and provides examples of sensing approaches. Moreover, the encounters of translating research into real world applications are addressed.

Recent Advances in Personal Glucose Meter-Based Biosensors for Food Safety Hazard Detection

Food safety has emerged as a significant concern for global public health and sustainable development. The development of analytical tools capable of rapidly, conveniently, and sensitively detecting food safety hazards is imperative. Over the past few decades, personal glucose meters (PGMs), characterized by their rapid response, low cost, and high degree of commercialization, have served as portable signal output devices extensively utilized in the construction of biosensors. This paper provides a comprehensive overview of the mechanism underlying the construction of PGM-based biosensors, which consists of three fundamental components: recognition, signal transduction, and signal output. It also detailedly enumerates available recognition and signal transduction elements, and their modes of integration. Then, a multitude of instances is examined to present the latest advancements in the application of PGMs in food safety detection, including targets such as pathogenic bacteria, mycotoxins, agricultural and veterinary drug residues, heavy metal ions, and illegal additives. Finally, the challenges and prospects of PGM-based biosensors are highlighted, aiming to offer valuable references for the iterative refinement of detection techniques and provide a comprehensive framework and inspiration for further investigations.

Rational In Silico Design of Molecularly Imprinted Polymers: Current Challenges and Future Potential

The rational design of molecularly imprinted polymers has evolved along with state-of-the-art experimental imprinting strategies taking advantage of sophisticated computational tools. In silico methods enable the screening and simulation of innovative polymerization components and conditions superseding conventional formulations. The combined use of quantum mechanics, molecular mechanics, and molecular dynamics strategies allows for macromolecular modelling to study the systematic translation from the pre- to the post-polymerization stage. However, predictive design and high-performance computing to advance MIP development are neither fully explored nor practiced comprehensively on a routine basis to date. In this review, we focus on different steps along the molecular imprinting process and discuss appropriate computational methods that may assist in optimizing the associated experimental strategies. We discuss the potential, challenges, and limitations of computational approaches including ML/AI and present perspectives that may guide next-generation rational MIP design for accelerating the discovery of innovative molecularly templated materials.

Terminally Phosphorylated Triblock Polyethers Acting Both as Templates and Pore-Forming Agents for Surface Molecular Imprinting of Monoliths Targeting Phosphopeptides

The novel process reported here described the manufacture of monolithic molecularly imprinted polymers (MIPs) using a terminally functionalized block copolymer as the imprinting template and pore-forming agent. The MIPs were prepared through a step-growth polymerization process using a melamine-formaldehyde precondensate in a biphasic solvent system. Despite having a relatively low imprinting factor, the use of MIP monolith in liquid chromatography demonstrated the ability to selectively target desired analytes. An MIP capillary column was able to separate monophosphorylated peptides from a tryptic digest of bovine serum albumin. Multivariate data analysis and modeling of the phosphorylated and nonphosphorylated peptide retention times revealed that the number of phosphorylations was the strongest retention contributor for peptide retention on the monolithic MIP capillary column.

Recent Advances in Sensing Materials Targeting Clinical Volatile Organic Compound (VOC) Biomarkers: A Review

In general, volatile organic compounds (VOCs) have a high vapor pressure at room temperature (RT). It has been reported that all humans generate unique VOC profiles in their exhaled breath which can be utilized as biomarkers to diagnose disease conditions. The VOCs available in exhaled human breath are the products of metabolic activity in the body and, therefore, any changes in its control level can be utilized to diagnose specific diseases. More than 1000 VOCs have been identified in exhaled human breath along with the respiratory droplets which provide rich information on overall health conditions. This provides great potential as a biomarker for a disease that can be sampled non-invasively from exhaled breath with breath biopsy. However, it is still a great challenge to develop a quick responsive, highly selective, and sensitive VOC-sensing system. The VOC sensors are usually coated with various sensing materials to achieve target-specific detection and real-time monitoring of the VOC molecules in the exhaled breath. These VOC-sensing materials have been the subject of huge interest and extensive research has been done in developing various sensing tools based on electrochemical, chemoresistive, and optical methods. The target-sensitive material with excellent sensing performance and capturing of the VOC molecules can be achieved by optimizing the materials, methods, and its thickness. This review paper extensively provides a detailed literature survey on various non-biological VOC-sensing materials including metal oxides, polymers, composites, and other novel materials. Furthermore, this review provides the associated limitations of each material and a summary table comparing the performance of various sensing materials to give a better insight to the readers.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Metal-Organic Frameworks Meet Molecularly Imprinted Polymers: Insights and Prospects for Sensor Applications

The use of porous materials as the core for synthesizing molecularly imprinted polymers (MIPs) adds significant value to the resulting sensing system. This review covers in detail the current progress and achievements regarding the synergistic combination of MIPs and porous materials, namely metal/covalent-organic frameworks (MOFs/COFs), including the application of such frameworks in the development of upgraded sensor platforms. The different processes involved in the synthesis of MOF/COF-MIPs are outlined, along with their intrinsic properties. Special attention is paid to debriefing the impact of the morphological changes that occur through the synergistic combination compared to those that occur due to the individual entities. Thereafter, the strategies used for building the sensors, as well as the transduction modes, are overviewed and discussed. This is followed by a full description of research advances for various types of MOF/COF-MIP-based (bio)sensors and their applications in the fields of environmental monitoring, food safety, and pharmaceutical analysis. Finally, the challenges/drawbacks, as well as the prospects of this research field, are discussed in detail.

Application of Molecularly Imprinted Polymers for the Detection of Volatile and Off-Odor Compounds in Food Matrices

Molecularly imprinted polymers (MIPs) are synthetic receptors having specific cavities intended for a template molecule with a retention mechanism that depends on molecular recognition of the targeted constituent. They were initially established for the detection of minor molecules including drugs, pesticides, or pollutants. One of the most remarkable areas where MIPs have potential utilization is in food analysis, especially in terms of volatile compounds which are found in very low concentrations in foods but play a crucial role for consumer preference and acceptance. In recent years, these polymers have been used extensively for sensing volatile organic and off-odor compounds in terms of food quality for selective high-extraction purposes. This review first summarizes the basic principles and production processes of MIPs. Second, their recent applications in the separation, identification, and quantification of volatile and off-odor compounds in food samples are elucidated.

Nano-enabled sensing of per-/poly-fluoroalkyl substances (PFAS) from aqueous systems - A review

Per-/poly-fluoroalkyl substances (PFAS) are an emerging class of environmental contaminants used as an additive across various commodity and fire-retardant products, for their unique thermo-chemical stability, and to alter their surface properties towards selective liquid repellence. These properties also make PFAS highly persistent and mobile across various environmental compartments, leading to bioaccumulation, and causing acute ecotoxicity at all trophic levels particularly to human populations, thus increasing the need for monitoring at their repositories or usage sites. In this review, current nano-enabled methods towards PFAS sensing and its monitoring in wastewater are critically discussed and benchmarked against conventional detection methods. The discussion correlates the materials' properties to the sensitivity, responsiveness, and reproducibility of the sensing performance for nano-enabled sensors in currently explored electrochemical, spectrophotometric, colorimetric, optical, fluorometric, and biochemical with limits of detection of 1.02 × 10^-6 μg/L, 2.8 μg/L, 1 μg/L, 0.13 μg/L, 6.0 × 10^-5 μg/L, and 4.141 × 10^-7 μg/L respectively. The cost-effectiveness of sensing platforms plays an important role in the on-site analysis success and upscalability of nano-enabled sensors. Environmental monitoring of PFAS is a step closer to PFAS remediation. Electrochemical and biosensing methods have proven to be the most reliable tools for future PFAS sensing endeavors with very promising detection limits in an aqueous matrix, short detection times, and ease of fabrication.

The Evolution of Molecular Recognition: From Antibodies to Molecularly Imprinted Polymers (MIPs) as Artificial Counterpart

Molecular recognition is a useful property shared by various molecules, such as antibodies, aptamers and molecularly imprinted polymers (MIPs). It allows these molecules to be potentially involved in many applications including biological and pharmaceutical research, diagnostics, theranostics, therapy and drug delivery. Antibodies, naturally produced by plasma cells, have been exploited for this purpose, but they present noticeable drawbacks, above all production cost and time. Therefore, several research studies for similar applications have been carried out about MIPs and the main studies are reported in this review. MIPs, indeed, are more versatile and cost-effective than conventional antibodies, but the lack of toxicity studies and their scarce use for practical applications, make it that further investigations on this kind of molecules need to be conducted.

Artificial Biomimetic Electrochemical Assemblies

Rapid, selective, and cost-effective detection and determination of clinically relevant biomolecule analytes for a better understanding of biological and physiological functions are becoming increasingly prominent. In this regard, biosensors represent a powerful tool to meet these requirements. Recent decades have seen biosensors gaining popularity due to their ability to design sensor platforms that are selective to determine target analytes. Naturally generated receptor units have a high affinity for their targets, which provides the selectivity of a device. However, such receptors are subject to instability under harsh environmental conditions and have consequently low durability. By applying principles of supramolecular chemistry, molecularly imprinted polymers (MIPs) can successfully replace natural receptors to circumvent these shortcomings. This review summarizes the recent achievements and analytical applications of electrosynthesized MIPs, in particular, for the detection of protein-based biomarkers. The scope of this review also includes the background behind electrochemical readouts and the origin of the gate effect in MIP-based biosensors.

Recent development in the design of artificial enzymes through molecular imprinting technology

Enzymes, a class of proteins or RNA with high catalytic efficiency and specificity, have inspired generations of scientists to develop enzyme mimics with similar capabilities. Many enzyme mimics have been...

A rapid and sensitive method for separation of Cu2+ ions from industrial wastewater sample and water samples with methacrylamide-ethylene glycol dimethacrylate: A new synthesis of molecularly imprinted polymer

In this study, new molecularly imprinted polymer particles (MIP) were synthesised to extract Cu²⁺ ions from aqueous solutions using radical polymerisation. MIP was developed using the methacrylamide‐ethylene glycol dimethacrylate (EGDMA) cross linking agent, methacrylamide monomer, and ACV initiator by the radical polymerisation method. A comparison of various cross linking agents in MIP production showed that the best cross linking agents are EGDMA and gallic acid. The template ions were removed by leaching with 0.100 M HCl. The polymer particles were characterised by FTIR spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The effect of different parameters such as cross linkers, pH, time, maximum adsorption capacity, and kinetic and isotherm adsorption were investigated. The best conditions were determined (pH = 8.0, t = 10 min, and q_m = 262.53 mg g⁻¹). The adsorption data were best fitted by Freundlich isotherm and pseudo second order kinetic models, as well. Due to its high adsorption capacity and multi‐layer behaviour, this method is an easy, fast and safe way to extract cations. Removal of Cu²⁺ in certified tap water and rain water was demonstrated and the industrial wastewater sample (Charmshahr, Iran) with which the MIP was developed using Methacrylamide‐ Ethylene Glycol Dimethacrylate (EGDMA) was good enough for Cu²⁺ determination in matrices containing components with similar chemical property such as Co²⁺, Zn²⁺, Fe².

Magnetic carbon nanotubes-molecularly imprinted polymer coupled with HPLC for selective enrichment and determination of ferulic acid in traditional Chinese medicine and biological samples

A molecularly imprinted polymer (MIP) with magnetic carbon nanotubes (MCNTs) as carrier was synthesized and used for the enrichment and determination of ferulic acid (FA) by high-performance liquid chromatography (HPLC). The morphology and structure of the FA magnetic carbon nanotubes-molecularly imprinted polymers (MCNTs@FA-MIPs) were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results demonstrated that the prepared MCNTs@FA-MIPs had excellent magnetic properties and uniform appearance. The adsorption properties of the novel MIP were studied by kinetic, and isothermal adsorption experiments. The results showed that the MCNTs@FA-MIPs exhibited relatively good uptake kinetics (equilibrium time, 2 h), high adsorption capacity (50 mg⋅g-1), fast separation, and good selectivity for the template molecule with a separation factor α of 1.73. The MCNTs@FA-MIPs combined with HPLC were successfully applied to the separation, enrichment, and determination of FA in a Ligusticum chuanxiong extract and in plasma of rats which had been administered with Taitai beauty essence. The recoveries for FA were 95.53-100.03 % with relative standard deviations (RSDs) less than 5.5%. The results confirmed that the proposed MCNTs@FA-MIPs offered efficient extraction of FA from traditional Chinese medicinal preparations and blood samples and with high specificity.

Molecularly Imprinted Silk Fibroin Nanoparticles

Nanosized biomimetics prepared by the strategy of molecular imprinting, that is, the stamping of recognition sites by means of a template-assisted synthesis, are demonstrating potential as plastic antibodies in medicine, proving effective for cell imaging and targeted therapies. Most molecularly imprinted nanoparticles (MIP-NPs) are currently made of soft matter, such as polyacrylamide and derivatives. Yet, MIP-NPs biocompatibility is crucial for their effective translation into clinical uses. Here, we propose the original idea to synthesize fully biocompatible molecularly imprinted nanoparticles starting from the natural polymer silk fibroin (MIP SF-NPs), which is nontoxic and highly biocompatible. The conditions to produce MIP SF-NPs of different sizes (d_mean ∼ 50 nm; d_mean ∼ 100 nm) were set using the response surface method. The stamping of a single, high affinity (K_D = 57 × 10^-9 M), and selective recognition site per silk fibroin nanoparticle was demonstrated, together with the confirmation of nontoxicity. Additionally, MIP SF-NPs were used to decorate silk microfibers and silk nanofibers, providing a general means to add entailed biofunctionalities to materials.

Recent Advances in Sensing Applications of Molecularly Imprinted Photonic Crystals

Photonic crystals (PhCs) with a brightly colored structure are novel materials and are widely used in chemical and biological sensing. Combining PhCs with molecular imprinting technology (MIT), the molecularly imprinted PhC (MIPC) sensors are fabricated, which can specifically recognize the target molecules. Aside from high sensitivity and selectivity, the MIPC sensors could recognize the naked eye detection because of its optical properties. In this review, an overview of recent advances in sensing applications of MIPC sensors including the responsive mechanisms, application in environmental monitoring, and the application to human health were illustrated. The MIPC sensors all responded to the analytes specifically and also showed high sensitivity in real samples, which provided a method to realize the rapid, convenient, naked eye, and real-time detection. Furthermore, the current limitations and potential future directions of MIPC sensors were also discussed.

Advances in epitope molecularly imprinted polymers for protein detection: a review

Epitope molecularly imprinted polymers (EMIPs) are novel imprinted materials using short characteristic peptides as templates rather than entire proteins. To be specific, the amino acid sequence of the template peptide is the same as an exposed N- or C-terminus of a target protein, or its amino acid composition and sequence replicate a similar conformational arrangement as the same amino acid residues on the surface of the target protein. EMIPs have a good application prospect in protein research. Herein, we focus on classification of epitope imprinting techniques, methods of epitope immobilization on matrix materials including boronate affinity immobilization, covalent bonding immobilization, physical adsorption immobilization and metal ion chelation immobilization, and application of EMIPs in peptides, proteins, target imaging and target therapy fields. Finally, the main problems and future development are summarized.

Sol-gel process: the inorganic approach in protein imprinting

Proteins play a central role in the signal transmission in living systems since they are able to recognize specific biomolecules acting as cellular receptors, antibodies or enzymes, being themselves recognized by other proteins in protein/protein interactions, or displaying epitopes suitable for antibody binding. In this context, the specific recognition of a given protein unlocks a range of interesting applications in diagnosis and in targeted therapies. Obviously, this role is already fulfilled by antibodies with unquestionable success. However, the design of synthetic artificial systems able to endorse this role is still challenging with a special interest to overcome limitations of antibodies, in particular their production and their stability. Molecular Imprinted Polymers (MIPs) are attractive recognition systems which could be an alternative for the specific capture of proteins in complex biological fluids. MIPs can be considered as biomimetic receptors or antibody mimics displaying artificial paratopes. However, MIPs of proteins remains a challenge due to their large size and conformational flexibility, their complex chemical nature with multiple recognition sites and their low solubility in most organic solvents. Classical MIP synthesis conditions result in large polymeric cavities and unspecific binding sites on the surface. In this review, the potential of the sol-gel process as inorganic polymerization strategy to overcome the drawbacks of protein imprinting is highlighted. Thanks to the mild and biocompatible experimental conditions required and the use of water as a solvent, the inorganic polymerization approach better suited to proteins than organic polymerization. Through numerous examples and applications of MIPs, we proposed a critical evaluation of the parameters that must be carefully controlled to achieve sol-gel protein imprinting (SGPI), including the choice of the monomers taking part in the polymerization.

Porous thin-film molecularly imprinted polymer device for simultaneous determination of phenol, alkylphenol and chlorophenol compounds in water

A porous water-compatible molecularly imprinted polymer (MIP) coating using catechol as a pseudo-template and a water-soluble functional monomer (4-vinyl benzoic acid) with ethylene glycol dimethacrylate as the crosslinker was developed for extraction of phenols from environmental water samples. The MIP devices were combined with ultra high performance liquid chromatography with a photodiode array detector (UHPLC-PDA) suitable for the simultaneous determination of trace levels of phenolic compounds with a wide range of polarities -phenol, alkylphenols and chlorophenols- in seawater and produced water. Parameters that influence extraction efficiency (salinity, pH, polymer mass, desorption solvent, and desorption time) were optimized to give method detection limits (LOD) ranging from 0.1 to 2 μg L^-1 and linearity (R²>0.99) over at least three orders of magnitude for the hydrophobic phenols (e.g., 0.5-1000 μg L^-1 for 2,4,6-trichlorophenol) and ~2 orders of magnitude for the light phenols (e.g., 10-120 μg L^-1 for phenol, 5-120 μg L^-1 for methylphenols and 2-chlorophenol, 0.5-120 μg L^-1 3-methyl-4-chlorophenol and 2,4-dichlorophenol). The recoveries from authentic spiked samples ranged from 85 to 100% with %RSDs of 0.2-14% for seawater and 81-107% with %RSD of 0.1-11% for produced water. The resulting MIP-based extraction requires no pre-conditioning of the sorbent, and because the required sample size is small and sample manipulation is limited, the method is easy to multiplex for high throughput sample processing.

Electroanalytical profiling of cocaine samples by means of an electropolymerized molecularly imprinted polymer using benzocaine as the template molecule

Cocaine samples were ‘finger-printed’ using e-MIPs, constructed on the surface of portable SPCEs. The SWV data with suitable chemometric analysis provides valuable information about the drugs’ provenience which is crucial to tackle drug traffic.

Assessment of cross-reactivity in a tailor-made molecularly imprinted polymer for phenolic compounds using four adsorption isotherm models

Cross-reactivity is an important feature of molecularly imprinted polymers (MIPs), and is central to successful use of a pseudo-template in molecular imprinting. The adsorption and cross-reactivity of a molecularly imprinted polymer (MIP) designed for recognition of phenols from water was assessed using four different isotherm models (Langmuir (LI), Freundlich (FI), Langmuir-Freundlich (L-FI), and Brunauer, Emmett, and Teller (BET)). The L-FI model succeeded in explaining the cross-reactivity behavior through the total number of binding sites, the affinity constants and heterogeneity indices of the small phenols (phenol (ph), 2-methylphenol (2-MP), 3-methylphenol (3-MP), 2-chlorophenol (2-CP), 2,4-dimethylphenol (DMP), 2,4-dichlorophenol (DCP), 4-chloro-3-methylphenol (CMP)) with evidence that the phenols compete for binding sites based on their hydrophobicity as well as π-π, π-σ and dipole-dipole intermolecular forces. The recognition of the large phenols (2,4,6-trichlorophenol (TCP), pentachlorophenol (PCP), 4-teroctylphenol (4-OP), 4-nonylphenol (4-NP), which have much higher binding affinities than the smaller phenolic compounds, was explained with the BET isotherm model that predicts that multiple layers adsorb to the adsorbed monolayer. The adsorption behavior with MIPs is also shown to be superior to corresponding non-imprinted polymers and applicability of MIPs for trace analysis is highlighted.

Intramolecularly Cross-Linked Polymers: From Structure to Function with Applications as Artificial Antibodies and Artificial Enzymes

Cross-linking of polymers significantly alters their physical properties, greatly expanding their everyday utility. Indeed, the polymeric networks resulting from linkages between polymer chains are found in everyday materials from soft contact lenses and automobile tires to enamel coatings and high-performance adhesives. In contrast, intramolecularly cross-linked polymers have received far less attention until recent years, in large part because they are synthetically more challenging to prepare. In this Account, we trace our own efforts to develop the chemistry of intramolecularly cross-linked macromolecules, starting with dendrimers. Dendrimers provided an excellent starting point for investigating intramolecular cross-linking because they are single molecular entities. We showed that the end groups of dendrimers can be extensively cross-linked using the ring-closing metathesis reaction and that the discrete structure of the dendrimer provides unique opportunities for characterizing the number and location of the cross-links as well as some physical properties of the macromolecule such as its size and rigidity. Increasing the number of ring-closing metathesis reactions correlated with a reduction in size and an increase in rigidity. The general strategy applied to dendrimers was extended to star polymers and hyperbranched polyglycerols. Each of these macromolecules has a core or an initiating group from which the branches emanate. Linking the end groups or branches of these polymers presents a unique opportunity to chemically remove the core of the cross-linked macromolecule in a process that is reminiscent of that used to produce covalent molecular imprinted polymers. Recognizing this analogy, we sought a compelling application for cross-linked dendrimers, the first example of unimolecular imprinting, where a single polymer contains a single molecular imprint. The quality of the imprinting was mixed but pointed to an alternative general strategy for molecular imprinting in polymers. The effort also focused attention on synthetic antibodies and the general biomimicry provided by this class of macromolecules. Indeed, cross-linking of polymers either covalently or non-covalently bears a loose resemblance to folding of proteins into defined three-dimensional shapes. The synthesis and study of cross-linked linear polymers, often called single-chain nanoparticles (SCNPs), has emerged as a very active area of research in the past few years. Our experience with the cross-linking of branched polymers combined with an interest in performing organic synthesis within living cells led us to develop copper-containing SCNPs as artificial clickases. These polymeric clickases exhibit all of the hallmarks of enzymatic catalysis. One clickase containing a polyacrylamide backbone performs low-concentration copper-assisted alkyne-azide click reactions at unprecedented rates. Another performs click reactions within living cells. Other organic transformations can be performed intracellularly, and some of the most advanced SCNPs engage in concurrent and tandem catalysis with a naturally occurring biocatalyst. By tracing our own efforts, this Account provides a few entry points into the broader literature and also points to both the remaining challenges and overall promising future envisioned for this unique class of functional macromolecules.

Orthogonal dual molecularly imprinted polymer-based plasmonic immunosandwich assay: A double characteristic recognition strategy for specific detection of glycoproteins

Sensitive and specific detection methods are critical to the detection of glycoproteins. Immunoassay has been a powerful tool for this purpose, in which antibodies or their mimics particularly molecularly imprinted polymers (MIPs) are used for specific recognition. Epitope and glycan are two structure features of a glycoprotein. However, immunoassays based on simultaneous recognition towards the two characteristics have been scarcely explored so far. Herein we present a new strategy called orthogonal dual molecularly imprinted polymer-based plasmonic immunosandwich assay (odMIP-PISA). It relies on double recognition towards a target glycoprotein by two different types of MIPs, using epitope-imprinted gold nanoparticles (AuNPs)-coated slide as capturing substrate to recognize the peptide epitope and glycans-imprinted Raman-active silver nanoparticles as labeling nanotags to recognize the glycans. Carcinoembryonic antigen (CEA), a routinely used marker for colon cancer, was used as a test glycoprotein. The orthogonal double recognition apparently improved the specificity, reducing the maximum cross-reactivity from 14.4% for epitope recognition and 15.2% for glycan recognition to 8.2% for double recognition. Meanwhile, the plasmonic nanostructure-based Raman detection provided ultrahigh sensitivity, yielding a limit of detection of 5.56 × 10^-14 M (S/N = 10). Through measuring the CEA level in human serum, this method permitted differentiation of colon cancer patient from healthy individual. Compared with the traditional immunoassay, odMIP-PISA exhibited multiple advantages, including simplified procedure (6 steps), speed (30 min), reduced cost, and so on. Therefore, this new approach holds great promise in many applications particularly clinical diagnosis.

Molecularly Imprinted Polymer-Based Hybrid Materials for the Development of Optical Sensors

We report on the development of new optical sensors using molecularly imprinted polymers (MIPs) combined with different materials and explore the novel strategies followed in order to overcome some of the limitations found during the last decade in terms of performance. This review pretends to offer a general overview, mainly focused on the last 3 years, on how the new fabrication procedures enable the synthesis of hybrid materials enhancing not only the recognition ability of the polymer but the optical signal. Introduction describes MIPs as biomimetic recognition elements, their properties and applications, emphasizing on each step of the fabrication/recognition procedure. The state of the art is presented and the change in the publication trend between electrochemical and optical sensor devices is thoroughly discussed according to the new fabrication and micro/nano-structuring techniques paving the way for a new generation of MIP-based optical sensors. We want to offer the reader a different perspective based on the materials science in contrast to other overviews. Different substrates for anchoring MIPs are considered and distributed in different sections according to the dimensionality and the nature of the composite, highlighting the synergetic effect obtained as a result of merging both materials to achieve the final goal.

Molecularly Imprinted Polymers for Gossypol via Sol⁻Gel, Bulk, and Surface Layer Imprinting-A Comparative Study

Three gossypol molecularly imprinted polymers (MIPs) were prepared by bulk polymerization (MIP1), surface layer imprinting using silica gel as the support (MIP2), and the sol-gel process (MIP3). The as-prepared MIPs were characterized by SEM and nitrogen adsorption-desorption techniques to study the morphology structure. The adsorption experiments exhibited that MIP1 had adsorption capacity as high as 564 mg·g-1. The MIP2 showed faster adsorption kinetics than MIP1 and MIP3. The adsorption equilibrium could be reached for gossypol in 40 min. A selectivity study showed that the adsorption capacity of MIPs for gossypol was about 1.9 times higher than that of the structurally-similar analogs ellagic acid and 6.6 times higher than that of the quercetin. It was found that the pseudo-second-order kinetic model and the Freundlich isotherm model were more applicable for the adsorption kinetics and adsorption isotherm of gossypol binding onto the MIP1 and MIP2, respectively. Results suggested that among those three, the MIP2 was a desirable sorbent for rapid adsorption and MIP1 was suitable for selective recognition of gossypol.

Influence of Size and Shape of Silica Supports on the Sol⁻Gel Surface Molecularly Imprinted Polymers for Selective Adsorption of Gossypol

The influence of various silica gel supports with different shapes and sizes on the recognition properties of surface molecular imprinted polymers (MIPs) was investigated. MIPs for selective recognition and adsorption of gossypol were synthesized via the sol⁻gel process with a surface imprinting technique on silica gel substrates. 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) were chosen as the functional monomer and the cross-linker. The morphology and structure of the gossypol-MIPs were characterized using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and a standard Brunauer⁻Emett⁻Teller (BET) analysis. Results indicated that the surface imprinted polymer layer facilitated the removal and rebinding of the template, and thus, achieved fast binding kinetics. Compared with the MIPs prepared on irregularly shaped silica with a broad particle size distribution, the MIPs using regularly-shaped silica of uniform size showed higher imprinting factor (IF), and the MIP made with a relatively larger sized (60 μm) spherical silica, demonstrated higher adsorption capacity compared to the MIPs made with smaller sized, spherical silica. The MIP prepared with 60 μm spherically shaped silica, featured a fast adsorption kinetic of 10 min, and a saturated adsorption capacity of 204 mg·g−1. The gossypol-MIP had higher selectivity (IF = 2.20) for gossypol over its structurally-similar analogs ellagic acid (IF = 1.13) and quercetin (IF = 1.20). The adsorption data of the MIP correlated well with the pseudo-second-order kinetic model and the Freundlich isotherm model, which implied that chemical adsorption dominated, and that multilayer adsorption occurred. Furthermore, the MIP exhibited an excellent regeneration performance, and the adsorption capacity of the MIP for gossypol only decreased by 6% after six reused cycles, indicating good application potential for selective adsorption of gossypol.

Fabrication of Hypericin Imprinted Polymer Nanospheres via Thiol-Yne Click Reaction

To fabricate molecularly imprinted polymer nanospheres via click reaction, five different clickable compounds were synthesized and two types of click reactions (azide-alkyne and thiol-yne) were explored. It was found that molecularly imprinted polymer nanospheres could be successfully synthesized via thiol-yne click reaction using 3,5-diethynyl-pyridine (1) as the monomer, tris(3-mercaptopropionate) (tri-thiol, 5) as the crosslinker, and hypericin as the template (MIP⁻NSHs). The click polymerization completed in merely 4 h to produce the desired MIP⁻NSHs, which were characterized by FTIR, SEM, DLS, and BET, respectively. The reaction conditions for adsorption capacity and selectivity towards hypericin were optimized, and the MIP⁻NSHs synthesized under the optimized conditions showed a high adsorption capacity (Q = 6.03 μmol•g-1) towards hypericin. The imprinting factors of MIP⁻NSHs towards hypericin, protohypericin, and emodin were 2.44, 2.88, and 2.10, respectively.

Ultrasensitive sensing of tris(2,3-dibromopropyl) isocyanurate based on the synergistic effect of amino and hydroxyl groups of a molecularly imprinted poly(o-aminophenol) film

The ultrasensitive sensing of tris(2,3-dibromopropyl) isocyanurate was achieved by the synergistic effect of amino and hydroxyl groups in an imprinted poly(o-aminophenol) film.