Enumeration of acetate-consuming bacteria by microautoradiography under oxygen and nitrate respiring conditions in activated sludge

Quantification of Biologically and Chemically Bound Phosphorus in Activated Sludge from Full-Scale Plants with Biological P-Removal

Phosphorus (P) is present in activated sludge from wastewater treatment plants in the form of metal salt precipitates, extracellular polymeric substances, or bound into the biomass, for example, as intracellular polyphosphate (poly-P). Several methods for a reliable quantification of the different P-fractions have recently been developed, and this study combines them to obtain a comprehensive P mass-balance of activated sludge from four enhanced biological phosphate removal (EBPR) plants. Chemical characterization by ICP-OES and sequential P fractionation showed that chemically bound P constituted 38-69% of total P, most likely in the form of Fe, Mg, or Al minerals. Raman microspectroscopy, solution state ³¹P NMR, and ³¹P MAS NMR spectroscopy applied before and after anaerobic P-release experiments, were used to quantify poly-P, which constituted 22-54% of total P and was found in approximately 25% of all bacterial cells. Raman microspectroscopy in combination with fluorescence in situ hybridization was used to quantify poly-P in known polyphosphate-accumulating organisms (PAO) (Tetrasphaera, Candidatus Accumulibacter, and Dechloromonas) and other microorganisms known to possess high level of poly-P, such as the filamentous Ca. Microthrix. Interestingly, only 1-13% of total P was stored by unidentified PAO, highlighting that most PAOs in the full-scale EBPR plants investigated are known.

Uncultured Gammaproteobacteria and Desulfobacteraceae Account for Major Acetate Assimilation in a Coastal Marine Sediment

Acetate is a key intermediate in anaerobic mineralization of organic matter in marine sediments. Its turnover is central to carbon cycling, however, the relative contribution of different microbial populations to acetate assimilation in marine sediments is unknown. To quantify acetate assimilation by in situ abundant bacterial populations, we incubated coastal marine sediments with ¹⁴C-labeled acetate and flow-sorted cells that had been labeled and identified by fluorescence in situ hybridization. Subsequently, scintillography determined the amount of ¹⁴C-acetate assimilated by distinct populations. This approach fostered a high-throughput quantification of acetate assimilation by phylogenetically identified populations. Acetate uptake was highest in the oxic-suboxic surface layer for all sorted bacterial populations, including deltaproteobacterial sulfate-reducing bacteria (SRB), which accounted for up to 32% of total bacterial acetate assimilation. We show that the family Desulfobulbaceae also assimilates acetate in marine sediments, while the more abundant Desulfobacteraceae dominated acetate assimilation despite lower uptake rates. Unexpectedly, members of Gammaproteobacteria accounted for the highest relative acetate assimilation in all sediment layers with up to 31–62% of total bacterial acetate uptake. We also show that acetate is used to build up storage compounds such as polyalkanoates. Together, our findings demonstrate that not only the usual suspects SRB but a diverse bacterial community may substantially contribute to acetate assimilation in marine sediments. This study highlights the importance of quantitative approaches to reveal the roles of distinct microbial populations in acetate turnover.

Effect of nitrate concentration, pH, and hydraulic retention time on autotrophic denitrification efficiency with Fe(II) and Mn(II) as electron donors

The role of electron donors (Fe(2+) and Mn(2+)) in the autotrophic denitrification of contaminated groundwater by bacterial strain SY6 was characterized based on empirical laboratory-scale analysis. Strain SY6 can utilize Fe(2+) more efficiently than Mn(2+) as an electron donor. This study has shown that the highest nitrate removal ratio, observed with Fe(2+) as the electron donor, was approximately 88.89%. An immobilized biological filter reactor was tested by using three levels of influent nitrate (10, 30, and 50 mg/L), three pH levels (6, 7, and 8), and three levels of hydraulic retention time (HRT; 6, 8, and 12 h), respectively. An optimal nitrate removal ratio of about 95% was achieved at pH 6.0 using a nitrate concentration of 50 mg/L and HRT of 12 h with Fe(2+) as an electron donor. The study showed that 90% of Fe(2+) and 75.52% removal of Mn(2+) were achieved at pH 8.0 with a nitrate concentration of 50 mg/L and a HRT of 12 h. Removal ratio of Fe(2+) and Mn(2+) is higher with higher influent nitrate and HRT. A weakly alkaline environment assisted the removal of Fe(2+) and Mn(2+).

Characterization of the anaerobic denitrification bacterium Acinetobacter sp. SZ28 and its application for groundwater treatment

Acinetobacter sp. SZ28 exhibited efficient autotrophic denitrification ability using Mn(2+) as an electron donor. Sequence amplification identified the presence of the nirS gene. Meteorological chromatography analysis showed that N2 was produced as an end product. Response surface methodology experiments showed that the maximum removal of nitrate occurred under the following conditions: Mn(2+) concentration of 143.56 mg/L, C/N ratio of 6.82, initial pH of 5.17, and temperature of 34.26 °C, where the initial Mn(2+) concentration produced the largest effect. In the groundwater experiment, nitrate levels decreased from 1.63 mg/L to 0 mg/L. Three-dimensional fluorescence analysis showed a decrease in the peak intensity of the original humus. Humus and the small-molecule amino acid tryptophan were detected. These results demonstrated that strain SZ28 is a suitable candidate for the simultaneous removal of nitrogen and Mn(2+) in groundwater treatment.

Comparison of denitrification performance and microbial diversity using starch/polylactic acid blends and ethanol as electron donor for nitrate removal

Starch/polylactic acid (SPLA9) was prepared and used as electron donor for biological nitrate removal. The denitrification performance and microbial diversity were investigated and compared with that of ethanol supported denitrification system. The results showed that the SPLA9 system had richer microbial diversity by analyzing Shannon's diversity index, but the ethanol system showed higher denitrification rate. The formation of NH3-N was observed during denitrification for both systems, but its concentration in the SPLA9 system was lower than that in the ethanol system. The quick release and accumulation of dissolved organic carbon (DOC) were observed in SPLA9 system during the start-up period. Fortunately it decreased to about 5mg/L. Proteobacteria was the major phylum and Alicycliphilus and Thauera were the most abundant genera for both systems. Organisms from the genus Desulfovibrio were identified in both systems, which probably contributed to the dissimilatory nitrate reduction to ammonia (DNRA) reaction.

Identification of ciliate grazers of autotrophic bacteria in ammonia-oxidizing activated sludge by RNA stable isotope probing

It is well understood that protozoa play a major role in controlling bacterial biomass and regulating nutrient cycling in the environment. Little is known, however, about the movement of carbon from specific reduced substrates, through functional groups of bacteria, to particular clades of protozoa. In this study we first identified the active protozoan phylotypes present in activated sludge, via the construction of an rRNA-derived eukaryote clone library. Most of the sequences identified belonged to ciliates of the subclass Peritrichia and amoebae, confirming the dominance of surface-associated protozoa in the activated sludge environment. We then demonstrated that (13)C-labeled protozoan RNA can be retrieved from activated sludge amended with (13)C-labeled protozoa or (13)C-labeled Escherichia coli cells by using an RNA stable isotope probing (RNA-SIP) approach. Finally, we used RNA-SIP to track carbon from bicarbonate and acetate into protozoa under ammonia-oxidizing and denitrifying conditions, respectively. RNA-SIP analysis revealed that the peritrich ciliate Epistylis galea dominated the acquisition of carbon from bacteria with access to CO(2) under ammonia-oxidizing conditions, while there was no evidence of specific grazing on acetate consumers under denitrifying conditions.

Substrate incorporation patterns of bacterioplankton populations in stratified and mixed waters of a humic lake

Bacterial incorporation of glucose, leucine, acetate and 4-hydroxybenzoic acid (HBA) was investigated in an artificially divided humic lake (Grosse Fuchskuhle, Germany). Two basins with contrasting influx of allochthonous organic carbon were sampled during late summer stratification (oxic and anoxic layers) and after autumn mixing. High total and cell-specific incorporation rates were observed for glucose and HBA in stratified and mixed waters respectively, but only a small fraction of bacteria visibly incorporated HBA. The oxic layer of the more humic-rich basin featured a significantly lower fraction of glucose incorporating cells and substantially higher proportions of acetate assimilating bacteria. Niche differentiation was observed in two betaproteobacterial populations: cells affiliated with the Polynucleobacter C subcluster efficiently incorporated acetate but little glucose, whereas the opposite was found for members of the R-BT065 clade. By contrast, leucine incorporation was variable in both taxa. Considering the high concentrations and rapid photochemical generation of organic acids in humic waters our results may help to explain the success of the Polynucleobacter C lineage in such habitats. Specific substrate or habitat preferences were also present in three subgroups of the actinobacterial acI lineage: The numerically dominant clade in oxic waters (acI-840-1) was absent in the anoxic zone and did not incorporate acetate. A second group (acI-840-2) was found both in the epi- and hypolimnion, whereas the third one (acI-840-3) only occurred in anoxic waters. Altogether our results suggest a constitutive preference for some substrates versus an adaptive utilization of others in the studied microbial groups.

In situ detection of bacteria involved in cathodic depolarization and stainless steel surface corrosion using microautoradiography

AIMS

To examine the activity of bacteria involved in cathodic depolarization and surface corrosion on stainless steel in an in situ model system.

METHODS AND RESULTS

The microautoradiographic technique (MAR) was used to evaluate the activity of bacterial populations on stainless steel surfaces with a single cell resolution. Anaerobic uptake and fixation of (14)C-labelled bicarbonate occurred within corrosion sites in the absence of atmospheric hydrogen or other external electron donors, whereas it was taken up and fixed by bacteria at all other stainless steel surfaces in the presence of atmospheric hydrogen. This indicates that the bacteria utilized electrons originating from the corrosion sites due to the ongoing corrosion (cathodic depolarization).

CONCLUSION

Under in situ conditions, bacteria were fixating (14)C-labelled bicarbonate at corrosion sites in the absence of atmospheric hydrogen. This indicates that electrons transferred to the bacteria provided energy for bicarbonate fixation due to cathodic depolarization.

SIGNIFICANCE AND IMPACT OF THE STUDY

Application of the MAR method showed ongoing biocorrosion in the applied in situ model system and allowed in situ examination of bacterial activity on a single cell level directly on a metal surface providing information about potential corrosion mechanisms. Furthermore, application of fluorescence in situ hybridization in combination with MAR allows for identification of the active bacteria.

An updated process model for carbon oxidation, nitrification, and denitrification

The currently available comprehensive activated sludge models, ASM#1 (Grady et al., 1986) and its successor ASM#3 (Gujer et al., 1999), do not adequately describe nitrification and denitrification, with respect to ammonia oxidation inhibition, nitrite accumulation, or emissions of nitric oxide and nitrous oxide. A new comprehensive activated sludge process model, the Activated Sludge Model for Nitrogen (ASMN), is presented. The ASMN incorporates two nitrifying populations-ammonia-oxidizing bacteria and nitrite-oxidizing bacteria-using free ammonia and free nitrous acid, respectively, as their true substrates. The ASMN incorporates four-step denitrification (sequential reduction of nitrate to nitrogen gas via nitrite, nitric oxide, and nitrous oxide) using individual, reaction-specific parameters. Simulation results for ammonia, nitrate, soluble substrate, and biomass concentrations determined by using ASMN for three activated sludge process configurations under steady-state and dynamic municipal-type influent conditions are shown to be comparable with ASM#1 results.

Method for measuring substrate preferences by individual members of microbial consortia proposed for bioaugmentation

In this study we used the assimilation of isotope labeled CO(2) to measure the substrate preferences by two different bioaugmentation mixtures proposed for bioremediation of diesel oil contamination. All active microorganisms assimilate CO(2) in various carboxylation processes involved in growth. The CO(2) assimilation by the two mixtures was measured upon addition of glucose, diesel oil or specific compounds present in diesel oil (naphthalene, toluene, hexadecane, and octane). It was shown that within short term incubations with diesel oil (<5 h), one bioaugmentation mixture was superior to the other regarding the assimilation of CO(2). This observation was confirmed in a labor-intensive long term microcosm study (60 days). The applied method open various possibilities for fast pre-testing of substrate-preferences by microbial-bioaugmentation mixtures without microcosm experiments, on-site tests, and complicated chemical analysis. This study also demonstrates the possibility to obtain further information on the substrate preferences at a single cell level of phylogenetically defined microbial subgroups in bioaugmentation mixtures, based on combined analyses of microautoradiography and fluorescence in situ hybridization.

Ecophysiology of abundant denitrifying bacteria in activated sludge

The abundance of potential denitrifiers in full-scale wastewater treatment plants with biological nitrogen and phosphorus removal was investigated by FISH and various oligonucleotide probes. The potential denitrifiers were characterized as probe-defined populations that were able to consume radiolabelled substrate with oxygen, nitrate and nitrite as electron acceptor as determined by microautoradiography. The most abundant potential denitrifiers were related to the genera Aquaspirillum, Azoarcus, Thauera and Rhodocyclus, all within the Betaproteobacteria. They made up 20-49% of all bacteria in most of the 17 nitrogen removal plants investigated and were hardly present in four plants without denitrification. The ecophysiology of Aquaspirillum, Azoarcus and Thauera-related bacteria was consistent within each probe-defined group in the plants investigated. These three groups showed distinct physiological differences, with the Aquaspirillum-related bacteria appearing as the most specialized one, consuming only amino acids among the substrates tested, and Thauera as the most versatile consuming some volatile fatty acids, ethanol and amino acids. The coexistence of Aquaspirillum, Azoarcus and Thauera-related bacteria in a range of treatment plants with differences in wastewater, design and operation suggest that the populations ensure a functional stability of the plants by occupying different ecological niches related to the carbon transformation.

The role of quorum sensing and the effect of environmental conditions on biofilm formation by strains of Vibrio vulnificus

It has been suggested that Vibrio vulnificus attaches to plankton and algae and is found in large numbers in the environment. Factors affecting attachment, biofilm formation and morphology of V. vulnificus have not been thoroughly investigated. This study evaluated the role of quorum sensing (QS) and environmental conditions on biofilm development of V. vulnificus. It was found that biofilm development by V. vulnificus was affected by nutrient and glucose concentration, but not by NaCl concentration or temperature under the conditions used here. Moreover, biofilm development of a QS mutant strain proceeded rapidly and sloughing occurred earlier than for the isogenic parent strain. There was a significant loss of viability for the QS mutant biofilm early in development. Hence, it is hypothesised that factors regulated by the QS system play a role in proper biofilm development and maintenance of V. vulnificus. Furthermore, it is shown that biofilm development varied among isolates.

Advances in microscopy: microautoradiography of single cells

Microautoradiography (MAR) is an efficient method to obtain reliable information about the ecophysiology of microorganisms at the single cell level in mixed communities. Data obtained by the traditional MAR method can now be improved significantly when MAR is combined with fluorescence in situ hybridization (FISH) with oligonucleotide probes for the identification of target organisms. This chapter discusses how to use MAR-FISH in various ecosystems with emphasis on the type of information to be obtained, incubation conditions, and detailed protocols for the MAR technique. It also discusses new MAR applications and the type of information that can be obtained, e.g., the use of dual labeling to investigate the simultaneous uptake of several substrates by individual prokaryotes.

Ecophysiology of the filamentous Alphaproteobacterium Meganema perideroedes in activated sludge

A comprehensive study of the ecophysiology of the filamentous Meganema perideroedes affiliated to the Alphaproteobacteria, possessing a "Nostocoida limicola Type II" filamentous morphology was conducted. This morphotype often causes serious bulking problems in activated sludge wastewater treatment plants, and hardly anything is known about its physiology. The study was carried out by applying a suite of in situ methods in an industrial activated sludge treatment plant with excessive growth of this species. The experiments revealed a very versatile organism able to take up a large variety of organic substrates under aerobic conditions. It had a remarkably high storage capacity forming polyhydroxyalkanoates from most substrates tested. When nitrate was present as e-acceptor, the number of substrates to be consumed by M. perideroedes was more restricted compared to aerobic conditions. With nitrite as e-acceptor, only acetate and glucose among the substrates tested could be assimilated and used for storage and possibly growth. This indicated that M. perideroedes might be able to denitrify under certain conditions, which is unusual for filamentous bacteria in activated sludge. No substrate uptake or storage was seen under anaerobic conditions. M. perideroedes was relatively hydrophobic, compared to other filamentous bacteria and microcolonies present in the sludge, indicating the presence of a hydrophobic sheath. Several excreted surface-associated exoenzymes were detected in the sludge, but M. perideroedes never showed any activity, except once after a breakdown in the production facility. This confirmed that M. perideroedes mainly grows on soluble substrates. Based on the studies of the ecophysiology of M. perideroedes, potential control strategies are suggested.

Biomass characteristics in three sequencing batch reactors treating a wastewater containing synthetic organic chemicals

The physical and biochemical characteristics of the biomass in three lab-scale sequencing batch reactors (SBR) treating a synthetic wastewater at a 20-day target solids retention time (SRT) were investigated. The synthetic wastewater feed contained biogenic compounds and 22 organic priming compounds, chosen to represent a wide variety of chemical structures with different N, P and S functional groups. At a two-day hydraulic retention time (HRT), the oxidation-reduction potential (ORP) cycled between -100 (anoxic) and 100 mV (aerobic) in the anoxic/aerobic SBR, while it remained in a range of 126+/-18 and 249+/-18 mV in the aerobic sequencing batch biofilm reactor (SBBR) and the aerobic SBR reactor, respectively. A granular activated sludge with excellent settleability (SVI=98+/-31 L mg(-1)) developed only in the anoxic/aerobic SBR, compared to a bulky sludge with poor settling characteristics in the aerobic SBR and SBBR. While all reactors had very good COD removal (>90%) and displayed nitrification, substantial nitrogen removal (74%) was only achieved in the anoxic/aerobic SBR. During the entire operational period, benzoate, theophylline and 4-chlorophenol were completely removed in all reactors. In contrast, effluent 3-nitrobenzoate was recorded when its influent concentration was increased to 5 mg L(-1) and dropped only to below 1 mg L(-1) after 300 days of operation. The competent (active) biomass fractions for these compounds were between 0.04% and 5.52% of the total biomass inferred from substrate-specific microbial enumerations. The measured competent biomass fractions for 4-chlorophenol and 3-nitrobenzoate degradation were significantly lower than the influent COD fractions of these compounds. Correspondent to the highest competent biomass fraction for benzoate degradation among the test SOCs, benzoate oxidation could be quantified with an extant respirometric technique, with the highest specific oxygen uptake rate (SOUR(benzoate), 0.026 g O2 h(-1) g(-1) XCOD) in the anoxic/aerobic SBR. These combined results suggest that operating SBRs with alternative anoxic/aerobic cycles might facilitate the formation of granular sludge with good settleability, and retain comparable removal of nitrogen and synthetic organic compounds. Hence, the practice of anoxic/aerobic cycling should be considered in wastewater treatment systems whenever possible.

Microbial diversity in biofilms from corroding heating systems

Culture-independent investigations of the bacterial diversity and activity in district heating systems with and without corrosion did not make it possible to relate one group of microorganisms with the observed corrosion. Fluorescence in situ hybridization by oligonucleotide probes revealed the dominance of beta-proteobacteria, sulphate reducing prokaryotes and alpha-proteobacteria. Analysis of a clone library from one Danish heating (DH) system showed that the most sequences formed two clusters within the alpha-proteobacteria affiliated to the families Rhizobiaceae and Acetobacteraceae and two clusters within the beta-proteobacteria belonging to the family Comamonadaceae. Functional groups were determined by microautoradiography showing aerobic and anaerobic bacteria (sulphate reducing and methanogenic bacteria). The corrosion study showed that pitting corrosion rates were five to ten times higher than the general corrosion rates, suggesting the presence of biocorrosion. The results indicate that several bacterial groups could be involved in corrosion of DH system piping including sulphate reducing prokaryotes, Acidovorax (within the beta-proteobacteria), methanogenic bacteria and others.

Flocculation of activated sludge flocs by stimulation of the aerobic biological activity

Activated sludge flocs are known to deflocculate under short-term anaerobic conditions, but little is known about possible reflocculation under subsequent aerobic conditions. When activated sludge flocs from two wastewater treatment plants deflocculated under anaerobic conditions with well-defined shear conditions, they could be almost, but not completely, reflocculated by aeration for 1-2 h under the same shear conditions. If the biological activity was reduced by adding azide, chloramphenicol or by decreasing the temperature, no or only very little reflocculation took place. This indicated that the reflocculation was under direct or indirect microbial control. Only a small part of the reflocculation was due to improved flocculation properties obtained by oxidation of Fe(II) to Fe(III), which is a better flocculant. Fe(II) was produced under the anaerobic conditions by microbial iron reduction, and it was oxidized to Fe(III) within less than one hour after the aeration was started. However, by comparing two different sludges with different capabilities for iron reduction, iron oxidation and responses to substrate addition, it was found that the aerobic biological activity most likely was of greatest significance for the observed reflocculation and floc formation under aerobic conditions. This was further supported by adding organic substrates (glucose or ethanol) during the aerobic reflocculation phase, which promoted reflocculation. However, some substrates had the opposite effect (acetate and lactate), where a deterioration of the reflocculation was observed, probably due to different responses from different groups of microorganisms in the sludges.

Micromanipulation and further identification of FISH-labelled microcolonies of a dominant denitrifying bacterium in activated sludge

The activated sludge process relies on the formation of strong microbial flocs. The knowledge about dominant floc-forming bacteria is at present very limited, especially from a phylogenetic perspective. In this study, numerous microcolonies in the activated sludge flocs were found to be targeted by a Betaproteobacteria-group-specific oligonucleotide probe using fluorescence in situ hybridization (FISH). Some of these were micromanipulated and further identified by reverse transcriptase polymerase chain reaction (RT-PCR) and sequencing to belong to the Aquaspirillum genus in the Neisseriaceae family. A specific oligonucleotide probe, Aqs997, was designed to target the identified bacteria. A survey in nine different wastewater treatment plants with nutrient removal (WWTP) showed a high abundance of bacteria hybridizing to the oligonucleotide probe developed. Microautoradiography (MAR) combined with FISH on activated sludge incubated with radiolabelled substrate showed uptake of substrate with oxygen, nitrate and nitrite as electron acceptor demonstrating a denitrifying potential of the bacteria investigated. The Aquaspirillum-related bacteria seemed to be abundant denitrifiers in WWTPs with nitrogen removal and they were particularly numerous in plants mainly receiving domestic wastewater, where they constituted up to 30% of all bacteria.

Application of polyhydroxyalkanoates for denitrification in water and wastewater treatment

Application of polyhydroxyalkanoates (PHAs) and related biodegradable polymers has gained momentum in various areas of biotechnology. A promising application that started appearing in the past decade is the use of PHAs as the solid substrate for denitrification of water and wastewater. This type of denitrification, termed here "solid-phase denitrification", has several advantages over the conventional system supplemented with liquid organic substrate. PHAs serve not only as constant sources of reducing power for denitrification but also as solid matrices favorable for development of microbial films. In addition, in contrast to conventional processes, the use of PHAs has no potential risk of release of dissolved organic carbon with the resultant deterioration of effluent water quality. If the production cost of PHAs can be brought down, its application to the denitrification process will become economically more promising. A number of PHA-degrading denitrifying bacteria have been isolated and characterized from activated sludge and continuous flow-bed reactors for denitrification with PHAs. Most of these isolates have been assigned phylogenetically to members of beta-Proteobacteria, especially those of the family Comamonadaceae. The metabolic and regulatory relationships between PHA degradation and denitrification, and the interactive relationship between PHA-degrading cells and the solid surface structure are important subjects awaiting future studies, which would provide a new insight into our comprehensive understanding of the solid-phase denitrification process.

Quantification of cell-specific substrate uptake by probe-defined bacteria under in situ conditions by microautoradiography and fluorescence in situ hybridization

A technique based on quantitative microautoradiography (QMAR) and fluorescence in situ hybridization (FISH) was developed and evaluated in order to determine the quantitative uptake of specific substrates in probe-defined filamentous bacteria directly in a complex system. The technique, QMAR-FISH, has a resolution of a single cell and is based on an improved fixation protocol and the use of an internal standard of bacteria with known specific radioactivity. The method was used to study the in situ ecophysiology of the filamentous bacteria 'Candidatus Meganema perideroedes' and Thiothrix sp. directly in an activated sludge system. The cellular uptake rate of tritium-labelled substrates revealed an average cell-specific uptake rate of 4.1 yen 10-15 mol of acetate cell-1 h-1 and 3.1 yen 10-15 mol of acetate cell-1 h-1 for the two filamentous species respectively. The two filamentous species had very similar activity in all cells along each filament. Surprisingly, the filaments within both probe-defined populations had threefold variation in activity between the different filaments, demonstrating a large variation in activity level within a single population in a complex system. The substrate affinity (Ks) for uptake of acetate of the cells within the two filamentous bacteria was determined by incubation with variable concentrations of labelled acetate. The Ks values of the 'Candidatus Meganema perideroedes' and the Thiothrix filamentous bacteria were determined to be 1.8 micro M and 2.4 micro M acetate respectively.

Evaluation of the redox dye 5-cyano-2,3-tolyl-tetrazolium chloride for activity studies by simultaneous use of microautoradiography and fluorescence in situ hybridization

Three microscopic in situ techniques were used simultaneously to investigate viability and activity on a single-cell level in activated sludge. The redox dye 5-cyano-2,3-tolyl-tetrazolium chloride (CTC) was compared with microautoradiography (MAR) and fluorescence in situ hybridization (FISH) to indicate activity of cells in Thiothrix filaments and in single floc-forming bacteria. The signals from MAR and FISH correlated well, whereas only 65% of the active Thiothrix cells and 41% of all single cells were detectable by CTC reduction, which mainly targeted the most active cells.

Abundance and phylogenetic affiliation of iron reducers in activated sludge as assessed by fluorescence in situ hybridization and microautoradiography

Microautoradiography (MAR) was used to enumerate acetate-consuming bacteria under Fe(III)-reducing conditions in activated sludge. This population is believed to consist of dissimilatory iron-reducing bacteria, because the applied incubation conditions and the use of specific inhibitors excluded consumption of radiolabeled acetate by other physiological groups such as sulfate reducers. By use of this approach, dissimilatory iron reducers were found in a concentration of 1.1 x 10(8) cells per ml, corresponding to approximately 3% of the total cell count as determined by DAPI (4',6'-diamino-2-phenylindoledihydrochloride-dilactate) staining. The MAR enumeration method was compared to the traditional most-probable-number (MPN) method (FeOOH-MPN) and a modified MPN method, which contains Ferrozine directly within the MPN dilutions to determine the production of small amounts of ferrous iron (Ferrozine-MPN). The Ferrozine-MPN method yielded values 6 to 10 times higher than those obtained by the FeOOH-MPN method. Nevertheless, the MAR approach yielded counts that were 100 to 1,000 times higher than those obtained by the Ferrozine-MPN method. Specific in situ Fe(III) reduction rates per cell (enumerated by the MAR method) were calculated and found to be comparable to the respective rates for pure cultures of dissimilatory iron-reducing bacteria, suggesting that the new MAR method is most reliable. A combination of MAR and fluorescence in situ hybridization was used for phylogenetic characterization of the putative iron-reducing bacteria. All activated-sludge cells able to consume acetate under iron-reducing conditions were targeted by the bacterial oligonucleotide probe EUB338. Around 20% were identified as gamma Proteobacteria, and 10% were assigned to the delta subclass of Proteobacteria.

In situ studies of the phylogeny and physiology of filamentous bacteria with attached growth

Among the filamentous bacteria occasionally causing bulking problems in activated sludge treatment plants, three morphotypes with attached microbial growth are common, Eikelboom Type 0041, Type 1851 and Type 1701. A better knowledge of the phylogeny and physiology of these filamentous bacteria is necessary in order to develop control strategies for bulking. In this study we have used a combination of fluorescence in situ hybridization (FISH) and microautoradiography (MAR) to investigate the identity and in situ physiology of the Type 0041-morphotype and its attached bacteria in two wastewater treatment plants. Identification and enumeration of Type 0041 using group-specific 16S rRNA-targeted FISH probes revealed that approximately 15% of the filaments hybridized with a gene probe specific for the TM7 group, a recently recognized major lineage in the bacterial domain. All other filaments morphologically identified as Type 0041 only hybridized to the general bacterial EUB338-probe, indicating that they probably do not belong to commonly isolated bacterial phyla such as the Proteobacteria, Firmicutes, Actinobacteria and Bacteroidetes, for which group-specific probes were used. The phylogenetic heterogeneity of Type 0041 again highlights the inadequacy of a morphology-based classification system. Like the filaments, most of the attached microbial cells were not identified beyond their affiliation to the Bacteria using the group-specific FISH probes. However, several different bacterial phyla were represented in the identified fraction suggesting that the attached microorganisms are phylogenetically diverse. The study of the in situ physiology of Type 0041 using MAR-FISH revealed that both the filaments and the attached bacteria on Type 0041 were versatile in the use of organic substrates and electron acceptors. It was observed that all Type 0041 could consume glucose, but none of the filaments were able to consume acetate under any conditions tested, in contrast to some of the attached bacteria. No significant physiological differences were found between TM7-positive and TM7-negative Type 0041 filaments, and only minor differences were observed between the two treatment plants tested. These are the first data on the physiology of the almost entirely uncharacterized TM7 phylum and show that TM7 filamentous bacteria can uptake carbon substrates under aerobic and anaerobic conditions.

Members of the family Comamonadaceae as primary poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-degrading denitrifiers in activated sludge as revealed by a polyphasic approach

The distribution and phylogenetic affiliations of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-degrading denitrifying bacteria in activated sludge were studied by a polyphasic approach including culture-independent biomarker and molecular analyses as well as cultivation methods. A total of 23 strains of PHBV-degrading denitrifiers were isolated from activated sludges from different sewage treatment plants. 16S ribosomal DNA (rDNA) sequence comparisons showed that 20 of the isolates were identified as members of the family Comamonadaceae, a major group of beta-Proteobacteria. When the sludges from different plants were acclimated with PHBV under denitrifying conditions in laboratory scale reactors, the nitrate removal rate increased linearly during the first 4 weeks and reached 20 mg NO(3)(-)-N h(-1) g of dry sludge(-1) at the steady state. The bacterial-community change in the laboratory scale sludges during the acclimation was monitored by rRNA-targeted fluorescence in situ hybridization and quinone profiling. Both approaches showed that the population of beta-Proteobacteria in the laboratory sludges increased sharply during acclimation regardless of their origins. 16S rDNA clone libraries were constructed from two different acclimated sludges, and a total of 37 clones from the libraries were phylogenetically analyzed. Most of the 16S rDNA clones were grouped with members of the family Comamonadaceae. The results of our polyphasic approach indicate that beta-Proteobacteria, especially members of the family Comamonadaceae, are primary PHBV-degrading denitrifiers in activated sludge. Our data provide useful information for the development of a new nitrogen removal system with solid biopolymer as an electron donor.

Bacterial community composition and function in sewage treatment systems

The application of modern molecular techniques has led to the identification, in situ quantification, and partial ecophysiological characterisation of bacteria responsible for bulking and foaming or for nutrient removal in sewage treatment systems. Unexpectedly, previously unrecognised, yet uncultured bacteria were demonstrated to catalyse nitrogen and phosphorous removal in activated-sludge and biofilm reactors. These findings provide the basis for the development of novel concepts for improving the efficiency and functional stability of waste water treatment systems.