Assessment of tin and butyltin species in estuarine superficial sediments from Gipuzkoa, Spain

Comparison of concentrations of toxic elements in the hair of first-year students of RUDN University from different regions of the world: a cross-sectional study

Due to the development of the metallurgical and energy industries and the operation of incinerators, more and more environmental pollution is occurring. Toxic elements accumulate in the biosphere and affect the state of the population of the regions of large-scale production or the disposal of industrial waste. The main goal of this study was to compare the toxic elements hair composition in people from different regions of the world. The concentrations of toxic and potentially toxic elements (Al, As, Be, Cd, Hg, Pb, Sn) in 198 people, first-year students of People's Friendship University of Russia, who arrived from different regions of the world, were measured with inductively coupled plasma mass spectrometry. Students were divided into 6 groups: from South and East Asia, from Latin America, from Arab countries, Central Asia and Afghanistan, from South and Central Africa, from Iran and Azerbaijan, and from Russia, Ukraine, and Moldova. Medians of the concentrations of elements in the hair in the general group were 5.8 μg/g for Al, 30 ng/g for As, 0.6 ng/g for Be, 9.0 ng/g for Cd, 0.11 μg/g for Hg, 0.24 μg/g for Pb, and 0.11 μg/g for Sn. All these values fall within the normal range. Students from Russia, Moldova, and Ukraine showed a significantly higher Sn content (0.28 μg/g) in their hair than subjects from other regions except for Latin America, p<0,05. Except for As, cases of exceeding their recommended concentrations in the hair were identified. However, the proportion of subjects with deviations in each group was not high - not more than 7%. In all regions, a positive correlation was found between Cd, Pb, and Sn, p<0.05, r>0.5 for all. Cases of exceeding the maximum permissible concentrations of various toxic elements in the hair were detected in people from all regions of the Earth included in the study. And although the overall picture of the content of toxic elements in the hair of students from all regions in our study does not look critical, the results of previous studies, as well as information about the total deterioration of the environmental situation throughout the Earth, necessitate further large-scale environmental studies.

Occurrence, ecological and human health risks of phenyltin compounds in the marine environment of Hong Kong

Triphenyltin (TPT) has been known as one of the most toxic compounds being released into the marine environment by anthropogenic means. This study assessed the contamination statuses of TPT and its two major degradants, i.e., monophenyltin and diphenyltin, in seawater, sediment and biota samples from marine environments of Hong Kong, a highly urbanized and densely populated city, and evaluated their ecological and human health risks. The results showed that the Hong Kong's marine environments were heavily contaminated with these chemicals, especially for TPT. Concentration ranges of TPT in seawater, sediment and biota samples were 3.8-11.7 ng/L, 71.8-91.7 ng/g d.w., and 9.6-1079.9 ng/g w.w., respectively. As reflected by high hazard quotients (1.7-5.3 for seawaters; 46.1-59.0 for sediments), TPT exhibited high ecological and human health risks. Our results are essential for the future management and control of anthropogenic TPT use in antifouling paints and as biocides in agriculture.

Settling fluxes and ecotoxicological risk assessment of fine sedimentary metals in Tema Harbour (Ghana)

Sediment traps were deployed in the Tema Harbour to estimate the settling fluxes of silt-clay particles and associated metals (Fe, Mn, Pb, Cr, Cu, Zn, Ni, Hg, Sn and As) and characterise their potential ecotoxicological risks. The mean daily settling fluxes of the silt-clay particles and associated metals ranged from 42.7 to 85.0gm^-2d^-1 and 1.3×10^-2 to 49.4mgm^-2d^-1, respectively, and were characterised by large fluctuations at each station. The silt-clay and metal fluxes strongly correlated, indicating the important role of the silt-clay particles in metal transport and distribution in the harbour. Geochemical indices indicated anthropogenic influences on the harbour as the Pb, Cr, Zn, Hg, Sn and As content in the settling silt-clay particles exceeded their average crustal concentrations. Sediment quality guidelines indicated these metals pose appreciable ecotoxicological risks, particularly As. Increasing temporal trends in As necessitates increased pollution control efforts at the harbour.

Sediment core data reconstruct the management history and usage of a heavily modified urban lake in Berlin, Germany

Urban surface waters face several stressors associated with industry and urban water management. Over much of the past century, the wastewater treatment in Berlin, Germany, relied on inefficient sewage farms, which resulted in severe eutrophication and sediment contamination in the recipient surface waterbodies. A prominent example is Lake Tegel, where a multitude of management measures were applied in the last decades for the purpose of ecosystem restoration. In this study, we analyzed sediment cores of three lakes with X-ray fluorescence spectroscopy: Lake Tegel, Lake Großer Wannsee, which is environmentally similar but has a different management history, and Lake Userin, which serves as a reference located in a nature protection area. Multivariate statistical methods (principal component analysis, k-means clustering, and self-organizing maps) were used to assess the sediment quality and to reconstruct the management history of Lake Tegel. Principal component analysis established two main gradients of sediment composition: heavy metals and lithogenic elements. The impact of the management measures was visualized in the lake sediment composition changing from high abundance of heavy metals and reducing redox conditions to less-impacted sediments in recent layers. The clustering techniques suggested heterogeneity among sites within Lake Tegel that probably reflect urban water management measures. The abundance of heavy metals in recent lake sediments of Lake Tegel is similar to a lake with low urban impact and is lower than in Lake Großer Wannsee suggesting that the management measures were successful in the reduction of heavy metals, which are still a threat for surface waters worldwide.

Acclimation and adaptation to common marine pollutants in the copepod Tigriopus californicus

Establishing water quality criteria using bioassays is complicated by variation in chemical tolerance between populations. Two major contributors to this variation are acclimation and adaptation, which are both linked to exposure history, but differ in how long their effects are maintained. Our study examines how tolerance changes over multiple generations of exposure to two common marine pollutants, copper (Cu) and tributyltin oxide (TBTO), in a sexually reproducing marine copepod, Tigriopus californicus. Lines of T. californicus were chronically exposed to sub-lethal levels of Cu and TBTO for 12 generations followed by a recovery period of 3 generations in seawater control conditions. At each generation, the average number of offspring produced and survived to 28 d was determined and used as the metric of tolerance. Lines exposed to Cu and TBTO showed an overall increase in tolerance over time. Increased Cu tolerance arose by generation 3 in the chronically exposed lines and was lost after 3 generations in seawater control conditions. Increased TBTO tolerance was detected at generation 7 and was maintained even after 3 generations in seawater control conditions. It was concluded from this study that tolerance to Cu is consistent with acclimation, a quick gain and loss of tolerance. In contrast, TBTO tolerance is consistent with adaptation, in which onset of tolerance was delayed relative to an acclimation response and maintained in the absence of exposure. These findings illustrate that consideration of exposure history is necessary when using bioassays to measure chemical tolerance.

Microextraction techniques used in the procedures for determining organomercury and organotin compounds in environmental samples

Due to human activities, the concentrations of organometallic compounds in all parts of the environment have increased in recent decades. The toxicity and some biochemical properties of mercury and tin present in the environment depend on the concentration and chemical form of these two elements. The ever-increasing demand for determining compounds at very low concentration levels in samples with complex matrices requires the elimination of interfering substances, the reduction of the final extract volume, and analyte enrichment in order to employ a detection technique, which is characterised by high sensitivity at low limits of quantification. On the other hand, in accordance with current trends, the analytical procedures should aim at the miniaturisation and simplification of the sample preparation step. In the near future, more importance will be given to the fulfilment of the requirements of Green Chemistry and Green Analytical Chemistry in order to reduce the intensity of anthropogenic activities related to analytical laboratories. In this case, one can consider the use of solvent-free/solvent-less techniques for sample preparation and microextraction techniques, because the use of the latter leads to lowering the quantity of reagents used (including solvents) due to the reduction of the scale of analysis. This paper presents an overview of microextraction techniques (SPME and LPME) used in the procedures for determining different chemical forms of mercury and tin.

Baseline of the butyltin distribution in surface sediments (0-20 cm) of the Elbe estuary (Germany, 2011)

The concentrations of the butyltin (BT) species tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) were measured in the surface sediments (0-20 cm) at 29 sites of the Elbe estuary in 2011. TBT values ranged from 'undetectable' to 41 ng Sn g(-1) dry weight (d.w.) with the two highest values measured in the inner section of the estuary near the port of Hamburg (32 and 41 ng Sn g(-1) d.w.). TBT, DBT, and MBT showed significant decreases towards the estuarine mouth (Spearman's rho -0.660, -0.685, and -0.583, respectively, p<0.001). The degradation of TBT, assessed by the BT degradation index (BDI), showed a rising trend from the port of Hamburg towards the mouth of the estuary, though not a significant one (Spearman's correlation, p=0.066). Annual sedimentation rates did not show any significant correlations (Spearman's correlation) to BT pollution or to the butyltin degradation index (BDI).

Application of principal component analysis-multivariate adaptive regression splines for the simultaneous spectrofluorimetric determination of dialkyltins in micellar media

A new multicomponent analysis method, based on principal component analysis-multivariate adaptive regression splines (PC-MARS) is proposed for the determination of dialkyltin compounds. In Tween-20 micellar media, dimethyl and dibutyltin react with morin to give fluorescent complexes with the maximum emission peaks at 527 and 520nm, respectively. The spectrofluorimetric matrix data, before building the MARS models, were subjected to principal component analysis and decomposed to PC scores as starting points for the MARS algorithm. The algorithm classifies the calibration data into several groups, in each a regression line or hyperplane is fitted. Performances of the proposed methods were tested in term of root mean square errors of prediction (RMSEP), using synthetic solutions. The results show the strong potential of PC-MARS, as a multivariate calibration method, to be applied to spectral data for multicomponent determinations. The effect of different experimental parameters on the performance of the method were studied and discussed. The prediction capability of the proposed method compared with GC-MS method for determination of dimethyltin and/or dibutyltin.

Dissolved inorganic tin sources and its coupling with eco-environments in Bohai Bay

Dissolved inorganic tin (DISn) and its spatial variation were examined in Bohai Bay seawaters to understand the DISn behavior and pollution in this area. DISn concentration gradually increased with the distance from the coast and showed a slight decrease with the increasing depth from surface water, suggesting the scavenged behavior of tin with an atmospheric input to surface water. Besides, the higher DISn values also were found near the Haihe Estuary inferring that the riverine input was a source of DISn. Based on the data in this study, a preliminary estimate of the tin budget via riverine input and atmospheric deposition has been established. According to our estimate, about 2 × 10(6) and 8.47 × 10(5) g/year of tin reach Bohai Bay via rivers and atmosphere. Environmental factors such as suspended particulate material, salinity, total organic matter, pH, nutrients, and phytoplankton had the important influences on DISn distribution. Among them, the negative correlation between DISn and phytoplankton at most stations might indicate the biological uptake of tin.

Integrated assessment of mangrove sediments in the Camamu Bay (Bahia, Brazil)

Camamu Bay, an Environmentally Protected Area, may be affected by the pressures of tourism and oil exploration in the adjacent continental platform. The current quality of the mangrove sediments was evaluated by porewater bioassays using embryos of Crassostrea rhizophorae and by an analysis of benthic macrofauna and its relationships with organic compounds, trace metals and bioavailability. Porewater toxicity varied from low to moderate in the majority of the samples, and polychaetes dominated the benthos. The Grande Island sampling station (Station 1) presented more sandy sediments, differentiated macrobenthic assemblages and the highest metal concentrations in relation to other stations and guideline values, and it was the only station that indicated a possible bioavailability of metals. The origin of the metals (mainly barium) is most likely associated with the barite ore deposits located in the Grande and Pequena islands. These results may be useful for future assessment of the impact of oil exploration in the coastal region.

Antifouling strategies: history and regulation, ecological impacts and mitigation

Biofouling increases drag on marine vessels resulting in higher fuel consumption and can also facilitate the transport of harmful non-indigenous species (NIS). Antifouling technologies incorporating biocides (e.g., copper and tributyltin) have been developed to prevent settlement of organisms on vessels, but their widespread use has introduced high levels of contamination into the environment and raised concerns about their toxic effects on marine communities. The recent global ban on tributyltin (1 January 2008) and increasing regulation of copper have prompted research and development of non-toxic paints. This review synthesises existing information regarding the ecological impact of biocides in a wide range of organisms and highlights directions for the management of antifouling paints. We focus particularly on representatives of the recent past (copper and tributyltin) and present (copper and 'booster') biocides. We identify knowledge gaps in antifouling research and provide recommendations relating to the regulation and phasing-out of copper.

Distribution of butyltins in the waters and sediments along the coast of India

Water and surface sediment samples were analyzed for butyltins (TBT, DBT, MBT) from various ports along the east and west coast of India. The total butyltin (TB) in water samples varied between ~1.7 and 342 ng S nl⁻¹, whereas for sediments it varied between below detection limit to 14861 ng S ng⁻¹ dry weight of sediment. On an average Chennai port recorded the highest level of butyltins in the sediments while Paradip recorded the highest level of butylins in the waters. A fairly good relationship between the TB in the sediment and overlying water samples, as well as between organic carbon and TB, implicates the importance of adsorption/desorption process in controlling the levels of TBT in these port areas. In India the data on organotin pollution is very sparse; most of the port areas have been surveyed for butyltins for the first time during this study.

Butyltin contamination in sediments and seawater from Kaohsiung Harbor, Taiwan

The distribution of butyltin (BT) compounds in the sediments and seawater, at the river outfalls, fishing ports, shipyards, and industrial zone docks of Kaohsiung Harbor, Taiwan were investigated. Twenty sediment and seawater samples were collected from various locations in the Harbor in 2006 and analyzed for monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT). Results showed that the concentration of total BTs varied from 1.5 to 151 ng/g in sediment samples, with TBT being the major component of the sediment samples. This suggests that sediments could be the most possible sink of TBT brought by the sorption mechanism. The concentrations of BTs ranged from 9.7 to 270 ng/L in seawater samples, whereas DBT and MBT, the degradation byproducts of TBT, were mainly the most abundant BT compounds of the seawater samples. This indicates that the abiotic or biotic degradation potential of TBT was significant. Spatially, the highest concentrations of BTs were observed in both water and sediment samples collected from the shipyard and fishing port areas. This indicates that the shipping-related activities (e.g., navigation, ship repair, and ship building) would contribute most of BTs in the environment. Results show that the concentrations of degradation products (DBT and MBT) were related closely to temperature, salinity, dissolved oxygen (DO), and chlorophyll-a of the seawater. This implies that seasonal changes of the water parameters controlled the degradation of TBT in seawater. The observed levels of BT compounds in both seawater and sediments were much higher than those required to induce toxic effects on marine organisms, suggesting that appropriate TBT control strategies should be taken in Kaohsiung Harbor.

Temporal trend of butyltins in seawater, sediments, and mussels from Busan Harbor of Korea between 2002 and 2007: tracking the effectiveness of tributylin regulation

Butyltins were determined in seawater, sediments, and mussels (Mytilus edulis) collected from Busan Harbor, the largest commercial harbor in Korea, to assess the contamination status and the effectiveness of tributylin (TBT) restriction. TBT concentrations were found to be 7.6 +/- 8.3 ng Sn/L in seawater, 387 +/- 606 ng Sn/g dry weight (wt) in sediments, and 322 +/- 167 ng Sn/g dry wt in mussels, and are comparable to those in the largest harbors worldwide. TBT levels were highest at locations near shipyards and related facilities. Busan Harbor was characterized by the long-term history of butyltin contamination, based on the lowered TBT/DBT ratios in environmental matrices. The temporal trend of TBT levels decreased significantly in seawater and mussels from 2002 to 2007, probably as a consequence of the legislative action in Korea (MOE Regulation 154/2000). However, TBT in sediments did not show any trend, suggesting a long half-life for TBT, about 17 years, in sediments.

Baseline of butyltin pollution in coastal sediments within the Basque Country (northern Spain), in 2007-2008

Tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) were measured in surficial sediments at, the ports of Pasaia and Bilbao, together with other mid- and small-size harbours of the Basque Country (northern Spain), in 2007-2008. The highest values of the sum of the three measured butyltin species (3523-3640 ng g(-1), as Sn) were found at sampling stations near to shipyards located within the port of Pasaia. The highest value of TBT concentration (3143 ng g(-1), as Sn) was found at the marina of Getxo, in the port of Bilbao. The degree of TBT degradation varied greatly between sampling stations, being found to be generally higher in those sediments with higher values of redox potential and lower values of TBT concentration (normalized by organic matter content).

Integrating long-term water and sediment pollution data, in assessing chemical status within the European Water Framework Directive

The European Water Framework Directive (WFD) establishes a framework for the protection and improvement of estuarine (transitional) and coastal waters, attempting to achieve good water status by 2015; this includes, within the assessment, biological and chemical elements. The European Commission has proposed a list of priority dangerous substances (including metals such as Cd, Hg, Ni and Pb), with the corresponding list of environmental quality standards (EQS), to assess chemical status, but only for waters. In this contribution, a long-term (1995-2007) dataset of transitional and coastal water and sediment trace elements concentrations, from the Basque Country (northern Spain), has been used to investigate the response of these systems to water treatment programmes. Moreover, the approach proposed in the WFD, for assessing water chemical status (the 'one out, all out' approach), is compared with the integration of water and sediment data, into a unique assessment. For this exercise, background levels are used as reference conditions, identifying the boundary between high and good chemical status. EQS are used as the boundary between good and moderate chemical status. This contribution reveals that the first approach can lead to misclassification, with the second approach representing the pattern shown by the long-term data trends. Finally, the management implications, using each approach are discussed.

Use of principal components analysis (PCA) on estuarine sediment datasets: the effect of data pre-treatment

Principal components analysis (PCA) is a multivariate statistical technique capable of discerning patterns in large environmental datasets. Although widely used, there is disparity in the literature with respect to data pre-treatment prior to PCA. This research examines the influence of commonly reported data pre-treatment methods on PCA outputs, and hence data interpretation, using a typical environmental dataset comprising sediment geochemical data from an estuary in SE England. This study demonstrated that applying the routinely used log (x + 1) transformation skewed the data and masked important trends. Removing outlying samples and correcting for the influence of grain size had the most significant effect on PCA outputs and data interpretation. Reducing the influence of grain size using granulometric normalisation meant that other factors affecting metal variability, including mineralogy, anthropogenic sources and distance along the salinity transect could be identified and interpreted more clearly.

Spatial and temporal distribution of tributyltin (TBT) in seawater, sediments and bivalves from coastal areas of Korea during 2001-2005

Tributyltin (TBT) concentrations were determined in seawater, sediments and bivalve samples collected from Korean coastal areas during 2001-2005, to investigate the levels and temporal variation in TBT contamination in relation to the timing of the imposition of regulations on TBT use in Korea. TBT concentrations ranged from <5.0 to 164 ng/L in seawater, from <7.0 to 9,576 ng/g dry weight in sediments, and from <7.0 to 6,296 ng/g dry weight in bivalves. The highest concentrations of TBT were found at locations close to intensive shipping traffic and industrial complexes, and the contamination at some hot spot areas was high enough to cause harmful effects on marine organisms. TBT concentrations and their occurrence in Korean coastal waters have been decreasing annually. In particular, TBT concentrations in seawater have dramatically decreased. This result is consistent with regulations and bans on the use of TBT in Korea.

Butyltin occurrence and risk assessment in the sediments of the Iberian Peninsula

The occurrence of butyltin (BT) compounds in more than 50 recent sediment samples of the Iberian Peninsula, collected in the harbours of the western Mediterranean Sea (Spain) and the North Atlantic Ocean (Portugal), including domestic and industrial sewage disposal sites, has been assessed. The highest levels of tributyltin (TBT) (7673 microg kg(-1)dry wt.) were detected in commercial harbours associated with inputs from large vessels. However, relatively high TBT values (about 2150 microg kg(-1)dry wt.) were also detected in fishing and recreational boating areas. Spanish marinas and harbours are more polluted in terms of TBT (5-7673 microg kg(-1)dry wt.) compared to those in Portugal (4-12 microg kg(-1)dry wt.). Generally, the Mediterranean sediments show a BT distribution characterized by the predominance of TBT over the degradation products dibutyl (DBT) and monobutyltin (MBT), indicating the presence of recent inputs, in contrast to the Portuguese coastal distribution. Calculation of butyltin degradation indexes (BDI) confirmed a different trend, depending on the area. Furthermore, a comparative study of the occurrence of BT in different sewage sludge disposal sites shows that domestic primary sewage sludge effluents can contribute to coastal BT pollution, but to a lesser extent when compared with harbours. Historical trends (1995-2003) for Barcelona harbour reveal that BT regulations on the use of TBT-based antifouling paints have not been fully effective. Finally, a comparison against the existing sediment quality guidelines (SQGs) indicated that acute toxic effects could only be expected for TBT in some Mediterranean harbours; conversely, in every North Atlantic Ocean station, a lesser environmental threat for the harbour benthic community is expected.

Environmental levels, toxicity and human exposure to tributyltin (TBT)-contaminated marine environment. a review. b_antizar@hotmail.com

Tributyltin (TBT) is a toxic chemical used for various industrial purposes such as slime control in paper mills, disinfection of circulating industrial cooling waters, antifouling agents, and the preservation of wood. Due to its widespread use as an antifouling agent in boat paints, TBT is a common contaminant of marine and freshwater ecosystems exceeding acute and chronic toxicity levels. TBT is the most significant pesticide in marine and freshwaters in Europe and consequently its environmental level, fate, toxicity and human exposure are of current concern. Thus, the European Union has decided to specifically include TBT compounds in its list of priority compounds in water in order to control its fate in natural systems, due to their toxic, persistent, bioaccumulative and endocrine disruptive characteristics. Additionally, the International Maritime Organization has called for a global treaty that bans the application of TBT-based paints starting 1 of January 2003, and total prohibition by 1 of January 2008. This paper reviews the state of the science regarding TBT, with special attention paid to the environmental levels, toxicity, and human exposure. TBT compounds have been detected in a number of environmental samples. In humans, organotin compounds have been detected in blood and in the liver. As for other persistent organic pollutants, dietary intake is most probably the main route of exposure to TBT compounds for the general population. However, data concerning TBT levels in foodstuffs are scarce. It is concluded that investigations on experimental toxicity, dietary intake, potential human health effects and development of new sustainable technologies to remove TBT compounds are clearly necessary.

Multi-generation studies with Chironomus riparius--effects of low tributyltin concentrations on life history parameters and genetic diversity

While toxicological data are available for numerous chemicals from standard tests, little is known on effects of pollutants over several generations or regarding chronic effects of chemicals on genetic diversity. Within the experiments, effects of the model pollutant tributyltin (TBT) were investigated over eleven generations at a sublethal TBT concentration of 4.46 microg as Sn kg-1 sediment dw on life-cycle parameters and genetic variability of Chironomus riparius. Moreover, the adaptation potential towards TBT was determined. This experimental design enables the identification of TBT effects on life-cycle parameters and the determination of a potential extinction risk caused by chronic exposure. Furthermore, effects on the genetic structure can be determined, which are not predictable based solely on knowledge of the toxic mode of action of the chemical. Genetic variety was determined via microsatellite analysis, measuring individual length differences of highly variable satellite DNA fragments. For the identification of changes in tolerances towards the stressor, acute and chronic toxicity experiments were conducted. During the multi-generation study, significant effects on development and reproduction were determined. For some generations, the emergence was significantly (p<0.05) delayed under TBT exposure. Reproduction seems to be a sensitive parameter as well, whereby females laid significantly larger egg masses (p<0.05) in the latter generations. TBT did not affect the population growth rate nor the genetic variability, while clear deviations from the Hardy-Weinberg equilibrium appeared. The study also provides strong evidence for the acquirement of a higher tolerance towards the stressor in the TBT-exposed group.

Distribution of butyltin and derivatives in oyster shells and trapped sediments of two estuaries in Cantabria (Northern Spain)

Distribution of butyltin compounds (BTs) and derivatives (monobutyltin, MBT; dibutyltin, DBT and tributyltin, TBT) was analysed in Crassostrea gigas oyster shells and the sediments trapped in the shell chambers, from two different estuaries in Cantabria (Northern Spain), with very different environmental conditions, where previous data have not been reported. Inorganic tin analysis in oyster shells was performed in order to study the degradation of BTs. Shell thickening and losses in biological growth are related with the presence of TBT, and were determined using three morphological indexes. Total BTs concentrations, expressed as Sn, ranged from 18.0 ng g(-1) to 176.7 ng g(-1) in sediments, and from 2.4 ng g(-1) to 11.1 ng g(-1) in oyster shells. Total inorganic tin concentrations ranged from 1775.0 ng g(-1) to 4781.3 ng g(-1) in oyster shells. The amount of BTs in oyster shells has been associated with the concentrations in the sediments trapped in the shell chambers. Partition coefficients between oyster sediments and oyster shells show the affinity of BTs by the sediments and the higher inorganic tin in oyster shells does not seem to be related to the BTs pollution.

Factors influencing organotin distribution in different marine environmental compartments, and their potential health risk

Tributyltin (TBT) and triphenyltin (TPT) in different marine environmental compartments such as seawater, sediments, and inshore fishes were investigated in 21 Taiwanese harbors between 2001 and 2004 in order to determine the major factors influencing their distribution. The existence of major input sources and the limited water exchange rate inside the harbors were indicated by higher TBT concentrations in seawater from inner harbor than from outer harbor areas. The levels of TBT in sediments were found to be mainly affected by their geographic distribution, water exchange rates and shipping activity. No significant correlations in TBT concentrations between water, sediment and fish suggested TBT accumulation by fish might not result from water and sediment, but from their food. TPT were detected in most fish samples, but found in few sediment samples and none in seawater, indicating fish could be as a target element for monitoring contaminated levels of TPT in the aquatic environment. Mean concentrations of TBT in fish muscle higher than tolerable average residue levels (TARLs), and mean hazard indices of TBT and TPT higher than 1 suggested consumption of fishes from Taiwanese harbor areas might have potential high risk to human health.

Organotin contamination in the Atlantic Ocean off the Iberian Peninsula in relation to shipping

Imposex in female snails, a bioindicator of TBT contamination, and the presence of organotins in snails' tissue and sediments were studied at nine sites off the western Iberian Peninsula. The study was part of a European project (acronym HIC-TBT) co-financed by the EU-LIFE programme, intending to investigate and communicate the impact of organotins from ships in marine ecosystems. Snails and sediments were sampled during two cruises in May/June 1999 and in January 2000 in areas of high, intermediate and low-shipping density. Imposex was found in female snails from several sampling sites, some of which had an imposex incidence of 100%. Differences in sensitivity were found between species; hence comparison of imposex levels between locations where different species were collected was not straightforward. Total organotin concentrations in sediments (sum of butyl and phenyltin compounds) ranged from 21 to 185 ng Sn g(-1) with higher values for most sites sampled in the vicinity of shipping lanes. Organotin concentration in snails' tissue ranged from <5 to 196 ng Sn g(-1), which are similar to those found in snails from other offshore areas contaminated by TBT. Overall, these results give further support to the recent ban on the use of organotin based antifouling paints to all ship size.

Effect of tributyltin on reproduction in Japanese whiting, Sillago japonica

We examined the effect of tributyltin (TBT) on reproduction in the Japanese whiting, Sillago japonica. Mature fish were placed in indoor 500-L polyethylene tanks (five males and three females per tank) with a flow-through system and received dietary exposure to tributyltin oxide at concentrations of 2, 20, or 200 microg/g for 30 days during the active spawning period. Eggs spawned from the fish were collected daily, and the floating egg rate, larval deformity, hatchability, and viable hatch were monitored. TBT concentration in eggs of 200-microg/g group ranged from 85.0 to 159.6 ng/g in the evaluation period (days 5-30). In this period, the floating egg rate (83.2%), viable hatchability (82.2%), and total number of viable larvae (422,000 larvae per 100 g of female) were all significantly decreased in the 200-microg/g group compared with the control group (93.0%, 91.9%, and 709,000 larvae, respectively). The rate of deformity (2.6%) in the 200-microg/g group was about three times that in the control group (0.8%), although this difference was not significant. From these results, the lowest observed effect concentration of TBT in eggs on reproduction in Japanese whiting was estimated to be less than 159.6 ng/g-eggs.

SPME in environmental analysis

Recent advances in the use of solid-phase microextraction (SPME) in environmental analysis, including fiber coatings, derivatization techniques, and in-tube SPME, are reviewed in this article. Several calibration methods for SPME, including traditional calibration methods, the equilibrium extraction method, the exhaustive extraction method, and several diffusion-based calibration methods, are presented. Recent developed SPME devices for on-site sampling and several applications of SPME in environmental analysis are also introduced.

Focused ultrasound and molecularly imprinted polymers: A new approach to organotin analysis in environmental samples

There is a high interest in speciation of organotin compounds (OTCs) in biota and marine sediment samples, due to their influence in the transmission of the contamination in the trophic chain. Sample treatment is still the most "compromising" step of speciation analysis. Extraction methods are in general time-consuming due to long extraction times and several analytical steps involved. In addition, in most cases there are problems of low recovery, especially for MBT. These drawbacks, added to the high matrix effects generally present in biota samples, make the sample treatment for organotin analysis a serious challenge for environmental issues. Here we present a novel, fast and efficient two steps method for organotin speciation in mussel and oyster tissue as well as in marine sediments. The first step based on the use of ultrasonic probe extraction for species leaching allowed us to quantitatively extract these compounds in a few minutes. Matrix interferences drastically decreased by applying a clean-up step based on the use of an imprinted polymer especially designed for tributyltin (TBT). This procedure increased accuracy and precision of the GC-FPD analysis and improving the limit of detection, Besides, this new method prevents the use of standard addition calibration method, which is mandatory without the clean-up step. The optimization and validation has been performed by using three reference materials: mussel tissue CRM-477, oyster candidate T-38 and sediment PACS-2.

Tributyltin partitioning in sediments: effect of aging

The effect of aging on the solid/pore-water partitioning and desorption behaviour of tributyltin (TBT) in sediments was examined. Three sediment samples with contrasting physical and chemical properties were spiked with 10 mg/kg TBT and aged under sterile conditions for periods of time ranging from 1 to 84 days. Aging had a negligible effect on partitioning and desorption behaviour in a sandy sample with very low organic carbon content (0.2% w/w). In contrast, for samples with larger amounts of organic carbon (2.6% and 4.8% w/w), aging caused substantial increases in TBT sorption. For these samples, apparent distribution coefficients (KD,app) obtained from sequential 2 h desorption experiments also exhibited a twofold increase between spiked sediments subjected to aging for 1 day and 84 days. This study demonstrates that aging effects may be an important aspect of TBT fate in contaminated sediments.

Applications of solid phase microextraction for the determination of metallic and organometallic species

This paper reviews recent developments of solid phase microextraction (SPME) and its application to the analysis of organometallic species of lead, arsenic, mercury, tin, and selenium by hyphenation with HPLC-GC-atomic spectrometry. In the first part, a background of the technique is given in terms of derivatization, fibers used, extraction and desorption conditions. The second part summarizes typical SPME applications to the determination of organometallic species and the main experimental conditions with the aid of specific examples. Most of the applications comprise alkylation with NaBEt4 and headspace extraction followed by gas chromatographic separation with a suitable detector.

Determination of organotin compounds in water by headspace solid phase microextraction with gas chromatography–mass spectrometry

This investigation evaluates headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) to determine trace levels of organotins in water. The organotins were derivatized in situ with sodium tetraethylborate and adsorbed on a poly(dimethysiloxane) (PDMS)-coated fused silica fiber. The SPME experimental procedures to extract organotins in water were at pH 5, with extraction and derivatization simultaneously at 45 degrees C for 30 min in a 2% sodium tetraethylborate solution and a sample solution volume in the ratio of 1:1, and desorption in the splitless injection port of the GC at 260 degrees C for 2 min. Detection limits are determined to be in the low ng/L range. According to the analysis, the linearity range is from 10 to 10,000 ng/L with R.S.D. values below 12% except triphenyltin (24%). The proposed method was tested by analyzing surface seawater from the harbors on the Taiwanese coast for organotins residues. Some organotins studied were detected in the analyzed samples. Results of this study demonstrate the adequacy of the headspace SPME-GC-MS method for analyzing organotins in sea water samples.

Applicability of solid-phase microextraction combined with gas chromatography atomic emission detection (GC-MIP AED) for the determination of butyltin compounds in sediment samples

The performance of solid-phase microextraction (SPME) applied to the determination of butyltin compounds in sediment samples is systematically evaluated. Matrix effects and influence of blank signals on the detection limits of the method are studied in detail. The interval of linear response is also evaluated in order to assess the applicability of the method to sediments polluted with butyltin compounds over a large range of concentrations. Advantages and drawbacks of including an SPME step, instead of the classic liquid-liquid extraction of the derivatized analytes, in the determination of butyltin compounds in sediment samples are considered in terms of achieved detection limits and experimental effort. Analytes were extracted from the samples by sonication using glacial acetic acid. An aliquot of the centrifuged extract was placed on a vial where compounds were ethylated and concentrated on a PDMS fiber using the headspace mode. Determinations were carried out using GC-MIP AED.