Resuspension of coal and coal/municipal sewage sludge combustion generated fine particles for inhalation health effects studies

Release of Plastics to Australian Land from Biosolids End-Use

Plastics are contaminants of emerging concern that can enter the environment from multiple sources, including via land application of treated sewage sludge (biosolids). Biosolids samples collected from 82 wastewater treatment plants (WWTPs) across Australia and covering 34% of the population during census week in 2016 were quantitatively analyzed to estimate the release of seven common plastics. Quantitative analysis was performed by pressurized liquid extraction followed by double-shot microfurnace pyrolysis coupled to gas chromatography mass spectrometry. Ninety nine percent of the samples contained plastics (Σ₆plastics) at concentrations of between 0.4 and 23.5 mg/g dry weight (median; 10.4 mg/g dry weight), while polycarbonate was not detected in any sample. Per-capita mass loads of plastics (Σ₆plastics) released were between 8 and 877 g/person/year across all investigated WWTPs. Polyethylene was the predominant plastic detected, contributing to 69% of Σ₆plastics. Based on the concentrations measured, it was projected that around 4700 metric tons (Mt) of plastics are released into the Australian environment through biosolids end-use each year, equating to approximately 200 g/person/year, which represents 0.13% of total plastics use in Australia. Of this, 3700 Mt of plastics are released to agricultural lands and 140 Mt to landscape topsoil. Our results provide a first quantitative per-capita mass loads and emission estimate of plastic types through biosolids end-use.

An evaluation of the toxicological aspects and potential doses from the inhalation of coal combustion products

This paper reviews toxicological literature pertaining to coal combustion products (CCPs) inhalation and presents case studies on the inhalation of CCPs from the Kingston Fossil Plant area and from the Colbert Fossil Plant CCP landfill site. While most research regarding coal plant emissions focuses on fly ash, this article takes a holistic approach to examining not only emitted particulate matter such as fly ash, but also the theoretical calculated doses of landfilled CCPs. Furthermore, these doses are compared to in vitro and in vivo studies in order to highlight differences between laboratory-based studies and to emphasize the difficulty in extrapolating effects from inhalation exposures. In both case studies, fugitive emissions from the Kingston ash spill or the Colbert CCP-handling operations did not exceed any national ambient air quality standards or reference concentrations for individual components. Adverse effects such as mild pulmonary inflammation noted in the reviewed literature were in response to doses much higher than would be likely to occur in humans exposed to landfilled CCPs. We conclude that the doses for fugitive emissions calculated herein do not appear to be high enough to elicit a measurable adverse response in humans.

Chemical and statistical interpretation of sized aerosol particles collected at an urban site in Thessaloniki, Greece

The size distribution of aerosol particles (PM0.015-PM18) in relation to their soluble inorganic species and total water soluble organic compounds (WSOC) was investigated at an urban site of Thessaloniki, Northern Greece. The sampling period was from February to July 2007. The determined compounds were compared with mass concentrations of the PM fractions for nano (N: 0.015 < Dp < 0.06), ultrafine (UFP: 0.015 < Dp < 0.125), fine (FP: 0.015 < Dp < 2.0) and coarse particles (CP: 2.0 < Dp < 8.0) in order to perform mass closure of the water soluble content for the respective fractions. Electrolytes were the dominant species in all fractions (24-27%), followed by WSOC (16-23%). The water soluble inorganic and organic content was found to account for 53% of the nanoparticle, 48% of the ultrafine particle, 45% of the fine particle and 44% of the coarse particle mass. Correlations between the analyzed species were performed and the effect of local and long-range transported emissions was examined by wind direction and backward air mass trajectories. Multivariate statistical analysis (cluster analysis and principal components analysis) of the collected data was performed in order to reveal the specific data structure. Possible sources of air pollution were identified and an attempt is made to find patterns of similarity between the different sized aerosols and the seasons of monitoring. It was proven that several major latent factors are responsible for the data structure despite the size of the aerosols - mineral (soil) dust, sea sprays, secondary emissions, combustion sources and industrial impact. The seasonal separation proved to be not very specific.

Carbon and nitrogen isotope analyses coupled with palynological data of PM10 in Wrocław city (SW Poland)--assessment of anthropogenic impact

We have applied both palynological and carbon and nitrogen isotopic analyses of PM10 (particulate matter with a diameter of 10 μm or less) to trace its origin and to assess the anthropogenic impact for the area under study. The PM10 samples were collected in Wrocław (SW Poland) by the Regional Inspectorate for Environment Protection during the year 2007. The usefulness of the palynological observations in the case of PM10 is much lower than that for total suspended particles due to the resolution of absorbed particles, but is still helpful for distinguishing C(3)/C(4) plants that indicate long-distance transport of pollutants. The δ(13)C(PM10) values varied seasonally from-26.9 to-25.1‰. The δ(15)N(PM10) values showed chaotic fluctuations and varied from 5.0 to 13.7‰. Our results indicated that during the heating period, the PM10 particles in Wrocław are derived mainly from local home heaters, whereas in the growing period, PM10 particles are derived from local transport and are partially generated by the industrial application of coal combustion outside the city of Wrocław.

Review of biosolids management options and co-incineration of a biosolid-derived fuel

This paper reviews current biosolids management options, and identifies incineration as a promising technology. Incineration is attractive both for volume reduction and energy recovery. Reported emissions from the incineration of biosolids were compared to various regulations to identify the challenges and future direction of biosolids incineration research. Most of the gaseous and metal emissions were lower than existing regulations, or could be met by existing technologies. This paper also presents the results of an experimental study to investigate the potential use of biosolids for co-incineration with wood pellets in a conventional wood pellet stove. Pilot scale combustion tests revealed that co-incineration of 10% biosolids with 90% premium grade wood pellets resulted in successful combustion without any significant degradation of efficiency and emissions.

ESEM-EDX characterisation of airborne particles from an industrialised area of northern Greece

The aim of this study was to characterise individual airborne particles collected from the Ptolemais-Kozani region (Western Macedonia), northern Greece. Throughout a 1-year period (March 2003 to February 2004), we collected several filters that captured airborne particles at seven sampling sites distributed throughout the area. The airborne particles captured on the filters were then characterised by environmental scanning electron microscopy (ESEM) coupled with energy-dispersive X-ray analysis (EDX). The particles were categorised as geogenic, biogenic and anthropogenic. The main anthropogenic airborne particles were fly ash (released from lignite-fired power plants) and carbonaceous (soot and char) and metalliferous (mainly iron- and copper-enriched) particulates. We present here characteristic ESEM and EDX spectra for the airborne particles and underline the presence of characteristic primary and secondary sulphates.

Technologies for laboratory generation of dust from geological materials

Dusts generated in the laboratory from soils and sediments are used to evaluate the emission intensities, composition, and environmental and health impacts of mineral aerosols. Laboratory dust generation is also utilized in other disciplines including process control and occupational hygiene in manufacturing, inhalation toxicology, environmental health and epidemiology, and pharmaceutics. Many widely available and/or easily obtainable laboratory or commercial appliances can be used to generate mineral aerosols, and several distinct classes of dust generators (fluidization devices, dustfall chambers, rotating drums/tubes) are used for geological particulate studies. Dozens of different devices designed to create dust from soils and sediments under controlled laboratory conditions are documented and described in this paper. When choosing a specific instrument, investigators must consider some important caveats: different classes of dust generators characterize different properties (complete collection of a small puff of aerosol versus sampling of a representative portion of a large aerosol cloud) and physical processes (resuspension of deposited dust versus in situ production of dust). The quantity "dustiness" has been used in industrial and environmental health research; though it has been quantified in different ways by different investigators, it should also be applicable to studies of geological aerosol production. Using standardized dust-production devices and definitions of dustiness will improve comparisons between laboratories and instruments: lessons learned from other disciplines can be used to improve laboratory research on the generation of atmospheric dusts from geological sources.

Combustion of dried animal dung as biofuel results in the generation of highly redox active fine particulates

Background

The burning of biomass in the developing world for heating and cooking results in high indoor particle concentrations. Long-term exposure to airborne particulate matter (PM) has been associated with increased rates of acute respiratory infections, chronic obstructive lung disease and cancer. In this study we determined the oxidative activity of combustion particles derived from the biomass fuel dung cake by examining their capacity to deplete antioxidants from a model human respiratory tract lining fluid (RTLF). For comparison, the observed oxidative activity was compared with that of particles derived from industrial and vehicular sources.

Results

Incubation of the dung cake particle suspensions in the RTLF for 4 h resulted in a mean loss of ascorbate of 72.1 ± 0.7 and 89.7 ± 2.5% at 50 and 100 μg/ml, respectively. Reduced glutathione was depleted by 49.6 ± 4.3 and 63.5 ± 22.4% under the same conditions. The capacity of these samples to deplete ascorbate was in excess of that observed with diesel or gasoline particles, but comparable to that seen with residual oil fly ash and considerably in excess of all three control particles in terms of glutathione depletion. Co-incubation with the metal chelator diethylenetriaminepentaacetate inhibited these losses, whilst minimal inhibition was seen with superoxide dismutase and catalase treatment. The majority of the activity observed appeared to be contained within aqueous particle extracts.

Conclusion

These data demonstrate that biomass derived particles have considerable oxidative activity, largely attributable to their transition metal content.

Pulmonary responses of acute exposure to ultrafine iron particles in healthy adult rats

As critical constituents of ambient particulate matter, transition metals such as iron may play an important role in health outcomes associated with air pollution. The purpose of this study was to determine the respiratory effects of inhaled ultrafine iron particles in rats. Sprague Dawley rats 10-12 weeks of age were exposed by inhalation to iron particles (57 and 90 microg/m(3), respectively) or filtered air (FA) for 6 h/day for 3 days. The median diameter of particles generated was 72 nm. Exposure to iron particles at a concentration of 90 microg/m(3) resulted in a significant decrease in total antioxidant power along with a significant induction in ferritin expression, GST activity, and IL-1beta levels in lungs compared with lungs of the FA control or of animals exposed to iron particles at 57 microg/m(3). NFkappaB-DNA binding activity was elevated 1.3-fold compared with that of control animals following exposure to 90 microg/m(3) of iron, but this change was not statistically significant. We concluded that inhalation of iron particles leads to oxidative stress associated with a proinflammatory response in a dose-dependent manner. The activation of NFkappaB may be involved in iron-induced respiratory responses, but further studies are merited.

Inhalation health effects of fine particles from the co-combustion of coal and refuse derived fuel

This paper is concerned with health effects from the inhalation of particulate matter (PM) emitted from the combustion of coal, and from the co-combustion of refuse derived fuel (RDF) and pulverized coal mixtures, under both normal and low NO(x) conditions. Specific issues focus on whether the addition of RDF to coal has an effect on PM toxicity, and whether the application of staged combustion (for low NO(x)) may also be a factor in this regard. Ash particles were sampled and collected from a pilot scale combustion unit and then re-suspended and diluted to concentrations of approximately 1000 microg/m(3). These particles were inhaled by mice, which were held in a nose-only exposure configuration. Exposure tests were for 1 h per day, and involved three sets (eight mice per set) of mice. These three sets were exposed over 8, 16, and 24 consecutive days, respectively. Pathological lung damage was measured in terms of increases in lung permeability. Results show that the re-suspended coal/RDF ash appeared to cause very different effects on lung permeability than did coal ash alone. In addition, it was also shown that a "snapshot" of lung properties after a fixed number of daily 1-h exposures, can be misleading, since apparent repair mechanisms cause lung properties to change over a period of time. For the coal/RDF, the greatest lung damage (in terms of lung permeability increase) occurred at the short exposure period of 8 days, and thereafter appeared to be gradually repaired. Ash from staged (low NO(x)) combustion of coal/RDF appeared to cause greater lung injury than that from unstaged (high NO(x)) coal/RDF combustion, although the temporal behavior and (apparent) repair processes in each case were similar. In contrast to this, coal ash alone showed a slight decrease of lung permeability after 1 and 3 days, and this disappeared after 12 days. These observations are interpreted in the light of mechanisms proposed in the literature. The results all suggest that the composition of particles actually inhaled is important in determining lung injury. Particle size segregated leachability measurements showed that water soluble sulfur, zinc, and vanadium, but not iron, were present in the coal/RDF ash particles, which caused lung permeabilities to increase. However, the differences in health effects between unstaged and staged coal/RDF combustion could not be attributed to variations in pH values of the leachate.