Purification and characterization of Saccharomyces cerevisiae Rnt1p nuclease

Co-transcriptional RNA cleavage by Drosha homolog Pac1 triggers transcription termination in fission yeast

Transcription termination of protein-coding genes in eukaryotic cells usually relies on a tight coordination between the cleavage and polyadenylation of the pre-mRNA, and 5′-3′ degradation of the downstream nascent transcript. Here we investigated the contribution of the essential fission yeast endonuclease Pac1, a homolog of human Drosha that cleaves hairpin RNA structures, in triggering polyadenylation-independent transcription termination. Using ChIP-sequencing in Pac1-deficient cells, we found that Pac1 triggers transcription termination at snRNA and snoRNA genes as well as at specific protein-coding genes. Notably, we found that Pac1-dependent premature termination occurred at two genes encoding conserved transmembrane transporters whose expression were strongly repressed by Pac1. Analysis by genome editing indicated that a stem-loop structure in the nascent transcript directs Pac1-mediated cleavage and that the regions upstream and downstream of the Pac1 cleavage site in the targeted mRNAs were stabilized by mutation of nuclear 3′-5′ and 5′-3′ exonucleases, respectively. Our findings unveil a premature transcription termination pathway that uncouples co-transcriptional RNA cleavage from polyadenylation, triggering rapid nuclear RNA degradation.

Promoter-dependent nuclear RNA degradation ensures cell cycle-specific gene expression

Cell cycle progression depends on phase-specific gene expression. Here we show that the nuclear RNA degradation machinery plays a lead role in promoting cell cycle-dependent gene expression by triggering promoter-dependent co-transcriptional RNA degradation. Single molecule quantification of RNA abundance in different phases of the cell cycle indicates that relative curtailment of gene expression in certain phases is attained even when transcription is not completely inhibited. When nuclear ribonucleases are deleted, transcription of the Saccharomyces cerevisiae G1-specific axial budding gene AXL2 is detected throughout the cell cycle and its phase-specific expression is lost. Promoter replacement abolished cell cycle-dependent RNA degradation and rendered the RNA insensitive to the deletion of nuclear ribonucleases. Together the data reveal a model of gene regulation whereby RNA abundance is controlled by promoter-dependent induction of RNA degradation.

Dicer 1 of Candida albicans cleaves plant viral dsRNA in vitro and provides tolerance in plants against virus infection

Most of the viral diseases of plants are caused by RNA viruses which drastically reduce crop yield. In order to generate resistance against RNA viruses infecting plants, we isolated the dicer 1 protein (CaDcr1), a member of RNAse III family (enzyme that cleaves double stranded RNA) from an opportunistic fungus Candida albicans. In vitro analysis revealed that the CaDcr1 cleaved dsRNA of the coat protein gene of cucumber mosaic virus (genus Cucumovirus, family Bromoviridae). Furthermore, we developed transgenic tobacco plants (Nicotiana tabacum cv. Xanthi) over-expressing expressing CaDcr1 by Agrobacterium mediated transformation. Transgenic tobacco lines were able to suppress infection of an Indian isolate of potato virus X (genus Potexvirus, family Alphaflexiviridae). The present study demonstrates that CaDcr1 can cleave double stranded replicative intermediate and provide tolerance to plant against RNA viruses.

Structure and function of Rnt1p: An alternative to RNAi for targeted RNA degradation

The double-stranded RNA-binding protein (dsRBP) family controls RNA editing, stability, and function in all eukaryotes. The central feature of this family is the recognition of a generic RNA duplex using highly conserved double-stranded RNA-binding domain (dsRBD) that recognizes the characteristic distance between the minor grooves created by the RNA helix. Variations on this theme that confer species and functional specificities have been reported but most dsRBPs retain their capacity to bind generic dsRNA. The ribonuclease III (RNase III) family members fall into four classes, represented by bacterial RNase III, yeast Rnt1p, human Drosha, and human Dicer, respectively. Like all dsRBPs and most members of the RNase III family, Rnt1p has a dsRBD, but unlike most of its kin, it poorly binds to generic RNA helices. Instead, Rnt1p, the only known RNase III expressed in Saccharomyces cerevisiae that lacks the RNAi (RNA interference) machinery, recognizes a specific class of stem-loop structures. To recognize the specific substrates, the dsRBD of Rnt1p is specialized, featuring a αβββααα topology and a sequence-specific RNA-binding motif at the C-terminus. Since the discovery of Rnt1p in 1996, significant progress has been made in studies of its genetics, function, structure, and mechanism of action, explaining the reasons and mechanisms for the increased specificity of this enzyme and its impact on the mechanism of RNA degradation. This article is categorized under: RNA Turnover and Surveillance > Turnover/Surveillance Mechanisms RNA Interactions with Proteins and Other Molecules > Protein-RNA Recognition RNA Processing > Processing of Small RNAs RNA Interactions with Proteins and Other Molecules > RNA-Protein Complexes.

The catalytic efficiency of yeast ribonuclease III depends on substrate specific product release rate

Members of the ribonuclease III (RNase III) family regulate gene expression by triggering the degradation of double stranded RNA (dsRNA). Hundreds of RNase III cleavage targets have been identified and their impact on RNA maturation and stability is now established. However, the mechanism defining substrates’ reactivity remains unclear. In this study, we developed a real-time FRET assay for the detection of dsRNA degradation by yeast RNase III (Rnt1p) and characterized the kinetic bottlenecks controlling the reactivity of different substrates. Surprisingly, the results indicate that Rnt1p cleavage reaction is not only limited by the rate of catalysis but can also depend on base-pairing of product termini. Cleavage products terminating with paired nucleotides, like the degradation signals found in coding mRNA sequence, were less reactive and more prone to inhibition than products having unpaired nucleotides found in non-coding RNA substrates. Mutational analysis of U5 snRNA and Mig2 mRNA confirms the pairing of the cleavage site as a major determinant for the difference between cleavage rates of coding and non-coding RNA. Together the data indicate that the base-pairing of Rnt1p substrates encodes reactivity determinants that permit both constitutive processing of non-coding RNA while limiting the rate of mRNA degradation.

Characterization of ribonuclease III from Brucella

Bacterial ribonuclease III (RNase III) is a highly conserved endonuclease, which plays pivotal roles in RNA maturation and decay pathways by cleaving double-stranded structure of RNAs. Here we cloned rncS gene from the genomic DNA of Brucella melitensis, and analyzed the cleavage properties of RNase III from Brucella. We identified Brucella-encoding small RNA (sRNA) by high-throughput sequencing and northern blot, and found that sRNA of Brucella and Homo miRNA precursor (pre-miRNA) can be bound and cleaved by B.melitensis ribonuclease III (Bm-RNase III). Cleavage activity of Bm-RNase III is bivalent metal cations- and alkaline buffer-dependent. We constructed several point mutations in Bm-RNase III, whose cleavage activity indicated that the 133th Glutamic acid residue was required for catalytic activity. Western blot revealed that Bm-RNase III was differently expressed in Brucella virulence strain 027 and vaccine strain M5-90. Collectively, our data suggest that Brucella RNase III can efficiently bind and cleave stem-loop structure of small RNA, and might participate in regulation of virulence in Brucella.

Stress-induced nuclear RNA degradation pathways regulate yeast bromodomain factor 2 to promote cell survival

Bromodomain proteins are key regulators of gene expression. How the levels of these factors are regulated in specific environmental conditions is unknown. Previous work has established that expression of yeast Bromodomain factor 2 (BDF2) is limited by spliceosome-mediated decay (SMD). Here we show that BDF2 is subject to an additional layer of post-transcriptional control through RNase III-mediated decay (RMD). We found that the yeast RNase III Rnt1p cleaves a stem-loop structure within the BDF2 mRNA to down-regulate its expression. However, these two nuclear RNA degradation pathways play distinct roles in the regulation of BDF2 expression, as we show that the RMD and SMD pathways of the BDF2 mRNA are differentially activated or repressed in specific environmental conditions. RMD is hyper-activated by salt stress and repressed by hydroxyurea-induced DNA damage while SMD is inactivated by salt stress and predominates during DNA damage. Mutations of cis-acting signals that control SMD and RMD rescue numerous growth defects of cells lacking Bdf1p, and show that SMD plays an important role in the DNA damage response. These results demonstrate that specific environmental conditions modulate nuclear RNA degradation pathways to control BDF2 expression and Bdf2p-mediated gene regulation. Moreover, these results show that precise dosage of Bromodomain factors is essential for cell survival in specific environmental conditions, emphasizing their importance for controlling chromatin structure and gene expression in response to environmental stress.

Cells adapt to changes in the environment through modulating gene expression at both the RNA and protein levels. RNA degradation plays a central role in this adaption response, by controlling the stability of specific mRNAs to optimize protein production in different conditions. In this study, we show that the gene encoding Bromodomain Factor 2 (BDF2) is tightly regulated according to environmental conditions by two distinct RNA degradation mechanisms. We show that these RNA degradation pathways are critical for cell growth in specific conditions. Our study suggests that environmental modulation of nuclear RNA degradation pathways is a previously unappreciated aspect of gene expression control.

Structure of a eukaryotic RNase III postcleavage complex reveals a double-ruler mechanism for substrate selection

Ribonuclease III (RNase III) enzymes are a family of double-stranded RNA (dsRNA)-specific endoribonucleases required for RNA maturation and gene regulation. Prokaryotic RNase III enzymes have been well characterized, but how eukaryotic RNase IIIs work is less clear. Here, we describe the structure of the Saccharomyces cerevisiae RNase III (Rnt1p) postcleavage complex and explain why Rnt1p binds to RNA stems capped with an NGNN tetraloop. The structure shows specific interactions between a structural motif located at the end of the Rnt1p dsRNA-binding domain (dsRBD) and the guanine nucleotide in the second position of the loop. Strikingly, structural and biochemical analyses indicate that the dsRBD and N-terminal domains (NTDs) of Rnt1p function as two rulers that measure the distance between the tetraloop and the cleavage site. These findings provide a framework for understanding eukaryotic RNase IIIs.

RNA-dependent regulation of the cell wall stress response

Stress response requires the precise modulation of gene expression in response to changes in growth conditions. This report demonstrates that selective nuclear mRNA degradation is required for both the cell wall stress response and the regulation of the cell wall integrity checkpoint. More specifically, the deletion of the yeast nuclear dsRNA-specific ribonuclease III (Rnt1p) increased the expression of the mRNAs associated with both the morphogenesis checkpoint and the cell wall integrity pathway, leading to an attenuation of the stress response. The over-expression of selected Rnt1p substrates, including the stress associated morphogenesis protein kinase Hsl1p, in wild-type cells mimicked the effect of RNT1 deletion on cell wall integrity, and their mRNAs were directly cleaved by the recombinant enzyme in vitro. The data supports a model for gene regulation in which nuclear mRNA degradation optimizes the cell response to stress and links it to the cell cycle.

Regulation of conditional gene expression by coupled transcription repression and RNA degradation

Gene expression is determined by a combination of transcriptional and post-transcriptional regulatory events that were thought to occur independently. This report demonstrates that the genes associated with the Snf3p–Rgt2p glucose-sensing pathway are regulated by interconnected transcription repression and RNA degradation. Deletion of the dsRNA-specific ribonuclease III Rnt1p increased the expression of Snf3p–Rgt2p-associated transcription factors in vivo and the recombinant enzyme degraded their messenger RNA in vitro. Surprisingly, Rnt1ps effect on gene expression in vivo was both RNA and promoter dependent, thus linking RNA degradation to transcription. Strikingly, deletion of RNT1-induced promoter-specific transcription of the glucose sensing genes even in the absence of RNA cleavage signals. Together, the results presented here support a model in which co-transcriptional RNA degradation increases the efficiency of gene repression, thereby allowing an effective cellular response to the continuous changes in nutrient concentrations.

Reporter mRNAs cleaved by Rnt1p are exported and degraded in the cytoplasm

For most protein coding genes, termination of transcription by RNA polymerase II is preceded by an endonucleolytic cleavage of the nascent transcript. The 3' product of this cleavage is rapidly degraded via the 5' exoribonuclease Rat1p which is thought to destabilize the RNA polymerase II complex. It is not clear whether RNA cleavage is sufficient to trigger nuclear RNA degradation and transcription termination or whether the fate of the RNA depends on additional elements. For most mRNAs, this cleavage is mediated by the cleavage and polyadenylation machinery, but it can also be mediated by Rnt1p. We show that Rnt1p cleavage of an mRNA is not sufficient to trigger nuclear degradation or transcription termination. Insertion of an Rnt1p target site into a reporter mRNA did not block transcription downstream of the cleavage site, but instead produced two unstable cleavage products, neither of which were stabilized by inactivation of Rat1p. In contrast, the 3' and 5' cleavage products were stabilized by the deletion of the cytoplasmic 5' exoribonuclease (Xrn1p) or by inactivation of the cytoplasmic RNA exosome. These data indicate that transcription termination and nuclear degradation is not the default fate of cleaved RNAs and that specific promoter and/or sequence elements are required to determine the fate of the cleavage products.

Synthetic RNA modules for fine-tuning gene expression levels in yeast by modulating RNase III activity

The design of synthetic gene networks requires an extensive genetic toolbox to control the activities and levels of protein components to achieve desired cellular functions. Recently, a novel class of RNA-based control modules, which act through post-transcriptional processing of transcripts by directed RNase III (Rnt1p) cleavage, were shown to provide predictable control over gene expression and unique properties for manipulating biological networks. Here, we increase the regulatory range of the Rnt1p control elements, by modifying a critical region for enzyme binding to its hairpin substrates, the binding stability box (BSB). We used a high throughput, cell-based selection strategy to screen a BSB library for sequences that exhibit low fluorescence and thus high Rnt1p processing efficiencies. Sixteen unique BSBs were identified that cover a range of protein expression levels, due to the ability of the sequences to affect the hairpin cleavage rate and to form active cleavable complexes with Rnt1p. We further demonstrated that the activity of synthetic Rnt1p hairpins can be rationally programmed by combining the synthetic BSBs with a set of sequences located within a different region of the hairpin that directly modulate cleavage rates, providing a modular assembly strategy for this class of RNA-based control elements.

A synthetic library of RNA control modules for predictable tuning of gene expression in yeast

The authors describe a library of synthetic RNA control elements that provide programmable post-transcriptional regulation of gene expression in yeast. This toolkit is then used to study endogenous regulation of the ergosterol biosynthetic pathway.

Rnt1p hairpins can act as effective posttranscriptional gene regulatory elements in the yeast Saccharomyces cerevisiae.

Modification of the cleavage efficiency box (CEB) region of an Rnt1p hairpin can modulate Rnt1p cleavage rates, and thus the resulting gene regulatory activities of the hairpin control elements.

A library of Rnt1p hairpins can act as a set of synthetic control modules that provide predictable tuning of gene expression over a wide range of expression levels.

The Rnt1p-based control elements can be combined with any promoter to support titration of regulatory strategies encoded in transcriptional regulators, including feedback control around endogenous proteins.

The design of complex biological systems encoding desired functions require the development of genetic tools for the precise control of protein levels in cells (Elowitz and Leibler, 2000; Gardner et al, 2000; Basu et al, 2004). For example, in the design of engineered metabolic networks, the tuning of enzyme levels is often critical for overcoming metabolic burden (Jones et al, 2000; Jin et al, 2003), the accumulation of toxic intermediates (Zhu et al, 2001; Pfleger et al, 2006) and detrimental consequences associated with the redirection of cellular resources from native pathways (Alper et al, 2005b; Paradise et al, 2008). Various examples of libraries of genetic control modules have been described that have been generated through the randomization of well-characterized gene expression control elements (Basu et al, 2004; Pfleger et al, 2006; Anderson et al, 2007). However, most of these studies have been conducted in Escherichia coli such that there is a lack of similar tools for other cellular chassis.

The budding yeast, Saccharomyces cerevisiae, is a relevant organism in industrial processes, including biosynthesis and biomanufacturing strategies (Ostergaard et al, 2000; Szczebara et al, 2003; Nguyen et al, 2004; Veen and Lang, 2004; Ro et al, 2006; Hawkins and Smolke, 2008). The majority of existing methods for tuning gene expression in yeast are through transcriptional control mechanisms in the form of inducible and constitutive promoter systems (Hawkins and Smolke, 2006; Nevoigt et al, 2006; Nevoigt et al, 2007). RNA-based control modules based on posttranscriptional mechanisms may offer an advantage in that they can be coupled to any promoter of choice, providing for enhanced control strategies and finer resolution tuning of protein expression levels. Although posttranscriptional control elements, such as internal ribosome entry sites and AU-rich elements, have been applied to regulate heterologous gene expression in yeast (Vasudevan and Peltz, 2001; Zhou et al, 2001; Lautz et al, 2010), these control elements have exhibited substantial variability in activity and have not been engineered as synthetic libraries exhibiting a wide range of predictable gene regulatory activities.

RNase III enzymes are a class of enzymes that cleave double-stranded RNA. The S. cerevisiae RNase III enzyme, Rnt1p, exhibits a number of unique features that allow it to recognize very specific RNA hairpin substrates that harbor a consensus AGNN tetraloop sequence. Despite extensive characterization of this enzyme and its demonstrated role in processing non-coding RNA and mRNA, neither natural nor synthetic Rnt1p substrates have been used to control gene expression levels in yeast. Therefore, we developed a genetic control system based on directed Rnt1p processing of a target transcript. Specifically, Rnt1p hairpins were immediately flanked by a clamp sequence (that insulates the hairpin structure from surrounding sequences) and placed downstream of a gene of interest, where they direct cleavage and thus inactivate the transcript, resulting in rapid transcript degradation. We validated this Rnt1p-based control system with two Rnt1p hairpins based on previous in vitro studies and demonstrated that Rnt1p hairpins can act as gene control modules in yeast.

Previous in vitro studies had identified three key regions in Rnt1p hairpins: the cleavage efficiency box (CEB), the binding stability box and the initial binding and positioning box (Lamontagne et al, 2003). The CEB region affects the processing of the hairpin stem by Rnt1p, such that nucleotide (nt) modifications in this region are expected to specifically modulate the cleavage rate. We created an Rnt1p hairpin library by randomizing the CEB region (12 nt). This library was placed downstream of a fluorescent reporter protein and a cell-based screening assay was used to identify functional members of the library that resulted in lowered fluorescence levels. The functional Rnt1p hairpin library comprises 16 unique sequences that span a large gene regulatory range—from 8 to 85% (Figure 3A)—and are fairly evenly distributed across this range. The negative controls for each sequence (constructed by mutating the required consensus tetraloop sequence) demonstrated that the majority of gene knockdown observed from each hairpin is due to Rnt1p processing (Figure 3B). A correlation analysis on the transcript and protein levels for each library hairpin construct indicated a strong positive correlation and a strong preservation of rank order between the two in vivo regulatory measurements (Figure 3C). Characterization of the hairpin library in a different genetic context supported the broader utility of these control modules for providing predictable gene control.

We applied the Rnt1p control modules to titrating a key enzyme component of the endogenous ergosterol biosynthesis network—the ERG9 genetic target. Squalene synthase, encoded by the ERG9 gene, is responsible for catalyzing the conversion of two molecules of farnesyl pyrophosphate to squalene, the first precursor in the ergosterol biosynthetic pathway in S. cerevisiae (Poulter and Rilling, 1981; Figure 6A). We integrated several members of the Rnt1p hairpin library downstream of the native ERG9 gene to cover the regulatory range of the library (Figure 6B). A strong positive correlation and preservation of rank order was observed between the ERG9 transcript levels and their yEGFP3 counterparts (Figure 6C). However, ERG9 expression levels did not fall below ∼40%, regardless of the Rnt1p hairpin strength, indicating that a previously identified endogenous feedback mechanism associated with the native ERG9 promoter acts to maintain ERG9 expression levels at that threshold value. In addition, most strains exhibited high relative ergosterol levels and growth rates, except for two strains harboring synthetic Rnt1p hairpins that resulted in the lowest expression levels, which exhibited a significant reduction in the amount of ergosterol produced and growth rate (Figure 6D and E). Our studies indicate that the endogenous feedback mechanism can be acting to increase ERG9 expression levels to the desired set point in the slow-growing strains, but the perturbations introduced in these strains may result in other impacts on the pathway that inhibit the endogenous control systems from restoring cellular growth to wild-type rates. These studies support the unique ability of the synthetic Rnt1p hairpin library to systematically titrate pathway enzyme levels by introducing precise perturbations around major control points while maintaining native cellular control strategies acting through transcriptional mechanisms.

Advances in synthetic biology have resulted in the development of genetic tools that support the design of complex biological systems encoding desired functions. The majority of efforts have focused on the development of regulatory tools in bacteria, whereas fewer tools exist for the tuning of expression levels in eukaryotic organisms. Here, we describe a novel class of RNA-based control modules that provide predictable tuning of expression levels in the yeast Saccharomyces cerevisiae. A library of synthetic control modules that act through posttranscriptional RNase cleavage mechanisms was generated through an in vivo screen, in which structural engineering methods were applied to enhance the insulation and modularity of the resulting components. This new class of control elements can be combined with any promoter to support titration of regulatory strategies encoded in transcriptional regulators and thus more sophisticated control schemes. We applied these synthetic controllers to the systematic titration of flux through the ergosterol biosynthesis pathway, providing insight into endogenous control strategies and highlighting the utility of this control module library for manipulating and probing biological systems.

Engineering ligand-responsive RNA controllers in yeast through the assembly of RNase III tuning modules

The programming of cellular networks to achieve new biological functions depends on the development of genetic tools that link the presence of a molecular signal to gene-regulatory activity. Recently, a set of engineered RNA controllers was described that enabled predictable tuning of gene expression in the yeast Saccharomyces cerevisiae through directed cleavage of transcripts by an RNase III enzyme, Rnt1p. Here, we describe a strategy for building a new class of RNA sensing-actuation devices based on direct integration of RNA aptamers into a region of the Rnt1p hairpin that modulates Rnt1p cleavage rates. We demonstrate that ligand binding to the integrated aptamer domain is associated with a structural change sufficient to inhibit Rnt1p processing. Three tuning strategies based on the incorporation of different functional modules into the Rnt1p switch platform were demonstrated to optimize switch dynamics and ligand responsiveness. We further demonstrated that these tuning modules can be implemented combinatorially in a predictable manner to further improve the regulatory response properties of the switch. The modularity and tunability of the Rnt1p switch platform will allow for rapid optimization and tailoring of this gene control device, thus providing a useful tool for the design of complex genetic networks in yeast.

Yeast ribonuclease III uses a network of multiple hydrogen bonds for RNA binding and cleavage

Members of the bacterial RNase III family recognize a variety of short structured RNAs with few common features. It is not clear how this group of enzymes supports high cleavage fidelity while maintaining a broad base of substrates. Here we show that the yeast orthologue of RNase III (Rnt1p) uses a network of 2'-OH-dependent interactions to recognize substrates with different structures. We designed a series of bipartite substrates permitting the distinction between binding and cleavage defects. Each substrate was engineered to carry a single or multiple 2'- O-methyl or 2'-fluoro ribonucleotide substitutions to prevent the formation of hydrogen bonds with a specific nucleotide or group of nucleotides. Interestingly, introduction of 2'- O-methyl ribonucleotides near the cleavage site increased the rate of catalysis, indicating that 2'-OH are not required for cleavage. Substitution of nucleotides in known Rnt1p binding site with 2'- O-methyl ribonucleotides inhibited cleavage while single 2'-fluoro ribonucleotide substitutions did not. This indicates that while no single 2'-OH is essential for Rnt1p cleavage, small changes in the substrate structure are not tolerated. Strikingly, several nucleotide substitutions greatly increased the substrate dissociation constant with little or no effect on the Michaelis-Menten constant or rate of catalysis. Together, the results indicate that Rnt1p uses a network of nucleotide interactions to identify its substrate and support two distinct modes of binding. One mode is primarily mediated by the dsRNA binding domain and leads to the formation of stable RNA/protein complex, while the other requires the presence of the nuclease and N-terminal domains and leads to RNA cleavage.

Short RNA guides cleavage by eukaryotic RNase III

In eukaryotes, short RNAs guide a variety of enzymatic activities that range from RNA editing to translation repression. It is hypothesized that pre-existing proteins evolved to bind and use guide RNA during evolution. However, the capacity of modern proteins to adopt new RNA guides has never been demonstrated. Here we show that Rnt1p, the yeast orthologue of the bacterial dsRNA-specific RNase III, can bind short RNA transcripts and use them as guides for sequence-specific cleavage. Target cleavage occurred at a constant distance from the Rnt1p binding site, leaving the guide RNA intact for subsequent cleavage. Our results indicate that RNase III may trigger sequence-specific RNA degradation independent of the RNAi machinery, and they open the road for a new generation of precise RNA silencing tools that do not trigger a dsRNA-mediated immune response.

Characterization of the reactivity determinants of a novel hairpin substrate of yeast RNase III

RNase III enzymes form a conserved family of proteins that specifically cleave double-stranded (dsRNA). These proteins are involved in a variety of cellular functions, including the processing of many non-coding RNAs, mRNA decay, and RNA interference. Yeast RNase III (Rnt1p) selects its substrate by recognizing the structure generated by a conserved NGNN tetraloop (G2-loop). Mutations of the invariant guanosine stringently inhibit binding and cleavage of all known Rnt1p substrates. Surprisingly, we have found that the 5' end of small nucleolar RNA 48 is processed by Rnt1p in the absence of a G2-loop. Instead, biochemical and structural analyses revealed that cleavage, in this case, is directed by a hairpin capped with an AAGU tetraloop, with a preferred adenosine in the first position (A1-loop). Chemical probing indicated that A1-loops adopt a distinct structure that varies at the 3' end where Rnt1p interacts with G2-loops. Consistently, chemical footprinting and chemical interference assays indicate that Rnt1p binds to G2 and A1-loops using different sets of nucleotides. Also, cleavage and binding assays showed that the N-terminal domain of Rnt1p aids selection of A1-capped hairpins. Together, the results suggest that Rnt1p recognizes at least two distinct classes of tetraloops using flexible protein RNA interactions. This underscores the capacity of double-stranded RNA binding proteins to use several recognition motifs for substrate identification.

Biochemical and genomic analysis of substrate recognition by the double-stranded RNA binding domain of yeast RNase III

Members of the RNase III family of double-stranded RNA (dsRNA) endonucleases are important enzymes of RNA metabolism in eukaryotic cells. Rnt1p is the only known member of the RNase III family of endonucleases in Saccharomyces cerevisiae. Previous studies have shown that Rnt1p cleaves dsRNA capped by a conserved AGNN tetraloop motif, which is a major determinant for Rnt1p binding and cleavage. The solution structure of the dsRNA-binding domain (dsRBD) of Rnt1p bound to a cognate RNA substrate revealed the structural basis for binding of the conserved tetraloop motif by alpha-helix 1 of the dsRBD. In this study, we have analyzed extensively the effects of mutations of helix 1 residues that contact the RNA. We show, using microarray analysis, that mutations of these amino acids induce substrate-specific processing defects in vivo. Cleavage kinetics and binding studies show that these mutations affect RNA cleavage and binding in vitro to different extents and suggest a function for some specific amino acids of the dsRBD in the catalytic positioning of the enzyme. Moreover, we show that 2'-hydroxyl groups of nucleotides of the tetraloop or adjacent base pairs predicted to interact with residues of alpha-helix 1 are important for Rnt1p cleavage in vitro. This study underscores the importance of a few amino acid contacts for positioning of a dsRBD onto its RNA target, and implicates the specific orientation of helix 1 on the RNA for proper positioning of the catalytic domain.

Genome-wide prediction and analysis of yeast RNase III-dependent snoRNA processing signals

In Saccharomyces cerevisiae, the maturation of both pre-rRNA and pre-small nucleolar RNAs (pre-snoRNAs) involves common factors, thereby providing a potential mechanism for the coregulation of snoRNA and rRNA synthesis. In this study, we examined the global impact of the double-stranded-RNA-specific RNase Rnt1p, which is required for pre-rRNA processing, on the maturation of all known snoRNAs. In silico searches for Rnt1p cleavage signals, and genome-wide analysis of the Rnt1p-dependent expression profile, identified seven new Rnt1p substrates. Interestingly, two of the newly identified Rnt1p-dependent snoRNAs, snR39 and snR59, are located in the introns of the ribosomal protein genes RPL7A and RPL7B. In vitro and in vivo experiments indicated that snR39 is normally processed from the lariat of RPL7A, suggesting that the expressions of RPL7A and snR39 are linked. In contrast, snR59 is produced by a direct cleavage of the RPL7B pre-mRNA, indicating that a single pre-mRNA transcript cannot be spliced to produce a mature RPL7B mRNA and processed by Rnt1p to produce a mature snR59 simultaneously. The results presented here reveal a new role of yeast RNase III in the processing of intron-encoded snoRNAs that permits independent regulation of the host mRNA and its associated snoRNA.

The RNA catabolic enzymes Rex4p, Rnt1p, and Dbr1p show genetic interaction with trans-acting factors involved in processing of ITS1 in Saccharomyces cerevisiae pre-rRNA

Eukaryotes have two types of ribosomes containing either 5.8SL or 5.8SS rRNA that are produced by alternative pre-rRNA processing. The exact processing pathway for the minor 5.8SL rRNA species is poorly documented. We have previously shown that the trans-acting factor Rrp5p and the RNA exonuclease Rex4p genetically interact to influence the ratio between the two forms of 5.8S rRNA in the yeast Saccharomyces cerevisiae. Here we report a further analysis of ITS1 processing in various yeast mutants that reveals genetic interactions between, on the one hand, Rrp5p and RNase MRP, the endonuclease required for 5.8SS rRNA synthesis, and, on the other, Rex4p, the RNase III homolog Rnt1p, and the debranching enzyme Dbr1p. Yeast cells carrying a temperature-sensitive mutation in RNase MRP (rrp2-1) exhibit a pre-rRNA processing phenotype very similar to that of the previously studied rrp5-33 mutant: ITS2 processing precedes ITS1 processing, 5.8SL rRNA becomes the major species, and ITS1 is processed at the recently reported novel site A4 located midway between sites A2 and A3. As in the rrp5-Delta3 mutant, all of these phenotypical processing features disappear upon inactivation of the REX4 gene. Moreover, inactivation of the DBR1 gene in rrp2-1, or the RNT1 gene in rrp5-Delta3 mutant cells also negates the effects of the original mutation on pre-rRNA processing. These data link a total of three RNA catabolic enzymes, Rex4p, Rnt1p, and Dbr1p, to ITS1 processing and the relative production of 5.8SS and 5.8SL rRNA. A possible model for the indirect involvement of the three enzymes in yeast pre-rRNA processing is discussed.

3'-box-dependent processing of human pre-U1 snRNA requires a combination of RNA and protein co-factors

Using an in vitro system we have recently shown that the 3' ends of human pre-snRNAs synthesized by RNA polymerase II are produced by RNA processing directed by the snRNA gene-specific 3' box. Towards a complete characterization of this processing reaction we have further investigated the in vitro requirements for proper 3' end formation of pre-U1 snRNA. Here we show that the 5' cap plays a stimulatory role and processing requires creatine phosphate. Our results also indicate that the pre-U1 processing activity is heat sensitive and that an RNA component is required. In addition, the exact sequence adjacent to the 3' box influences the position of the pre-U1 3' end produced in vitro. Interestingly, the processing extract active for 3'-box-dependent processing also contains an activity that converts the 3' end of RNA containing the U1 Sm protein binding site and the 3' terminal stem-loop into the mature form.

Molecular requirements for duplex recognition and cleavage by eukaryotic RNase III: discovery of an RNA-dependent DNA cleavage activity of yeast Rnt1p

Members of the double-stranded RNA (dsRNA) specific RNase III family are known to use a conserved dsRNA-binding domain (dsRBD) to distinguish RNA A-form helices from DNA B-form ones, however, the basis of this selectivity and its effect on cleavage specificity remain unknown. Here, we directly examine the molecular requirements for dsRNA recognition and cleavage by the budding yeast RNase III (Rnt1p), and compare it to both bacterial RNase III and fission yeast RNase III (Pac1). We synthesized substrates with either chemically modified nucleotides near the cleavage sites, or with different DNA/RNA combinations, and investigated their binding and cleavage by Rnt1p. Substitution for the ribonucleotide vicinal to the scissile phosphodiester linkage with 2'-deoxy-2'-fluoro-beta-d-ribose (2' F-RNA), a deoxyribonucleotide, or a 2'-O-methylribonucleotide permitted cleavage by Rnt1p, while the introduction of a 2', 5'-phosphodiester linkage permitted binding, but not cleavage. This indicates that the position of the phosphodiester link with respect to the nuclease domain, and not the 2'-OH group, is critical for cleavage by Rnt1p. Surprisingly, Rnt1p bound to a DNA helix capped with an NGNN tetraribonucleotide loop indicating that the binding of at least one member of the RNase III family is not restricted to RNA. The results also suggest that the dsRBD may accommodate B-form DNA duplexes. Interestingly, Rnt1p, but not Pac1 nor bacterial RNase III, cleaved the DNA strand of a DNA/RNA hybrid, indicating that A-form RNA helix is not essential for cleavage by Rnt1p. In contrast, RNA/DNA hybrids bound to, but were not cleaved by Rnt1p, underscoring the critical role for the nucleotide located at 3' end of the tetraloop and suggesting an asymmetrical mode of substrate recognition. In cell extracts, the native enzyme effectively cleaved the DNA/RNA hybrid, indicating much broader Rnt1p substrate specificity than previously thought. The discovery of this novel RNA-dependent deoxyribonuclease activity has potential implications in devising new antiviral strategies that target actively transcribed DNA.

Cell cycle-dependent nuclear localization of yeast RNase III is required for efficient cell division

Members of the double-stranded RNA-specific ribonuclease III (RNase III) family were shown to affect cell division and chromosome segregation, presumably through an RNA interference-dependent mechanism. Here, we show that in Saccharomyces cerevisiae, where the RNA interference machinery is not conserved, an orthologue of RNase III (Rnt1p) is required for progression of the cell cycle and nuclear division. The deletion of Rnt1p delayed cells in both G1 and G2/M phases of the cell cycle. Nuclear division and positioning at the bud neck were also impaired in Deltarnt1 cells. The cell cycle defects were restored by the expression of catalytically inactive Rnt1p, indicating that RNA cleavage is not essential for cell cycle progression. Rnt1p was found to exit from the nucleolus to the nucleoplasm in the G2/M phase, and perturbation of its localization pattern delayed the progression of cell division. A single mutation in the Rnt1p N-terminal domain prevented its accumulation in the nucleoplasm and slowed exit from mitosis without any detectable effects on RNA processing. Together, the data reveal a new role for a class II RNase III in the cell cycle and suggest that at least some members of the RNase III family possess catalysis-independent functions.

Evaluation of the RNA determinants for bacterial and yeast RNase III binding and cleavage

Bacterial double-stranded RNA-specific RNase III recognizes the A-form of an RNA helix with little sequence specificity. In contrast, baker yeast RNase III (Rnt1p) selectively recognizes NGNN tetraloops even when they are attached to a B-form DNA helix. To comprehend the general mechanism of RNase III substrate recognition, we mapped the Rnt1p binding signal and directly compared its substrate specificity to that of both Escherichia coli RNase III and fission yeast RNase III (PacI). Rnt1p bound but did not cleave long RNA duplexes without NGNN tetraloops, whereas RNase III indiscriminately cleaved all RNA duplexes. PacI cleaved RNA duplexes with some preferences for NGNN-capped RNA stems under physiological conditions. Hydroxyl radical footprints indicate that Rnt1p specifically interacts with the NGNN tetraloop and its surrounding nucleotides. In contrast, Rnt1p interaction with GAAA-capped hairpins was weak and largely unspecific. Certain duality of substrate recognition was exhibited by PacI but not by bacterial RNase III. E. coli RNase III recognized RNA duplexes longer than 11 bp with little specificity, and no specific features were required for cleavage. On the other hand, PacI cleaved long, but not short, RNA duplexes with little sequence specificity. PacI cleavage of RNA stems shorter than 27 bp was dependent on the presence of an UU-UC internal loop two nucleotides upstream of the cleavage site. These observations suggest that yeast RNase IIIs have two recognition mechanisms, one that uses specific structural features and another that recognizes general features of the A-form RNA helix.

The 3' ends of human pre-snRNAs are produced by RNA polymerase II CTD-dependent RNA processing

Proper 3' end formation of the human pre-snRNAs synthesized by pol II requires the cis-acting 3' box, although the precise function of this element has proved difficult to determine. In vivo, 3' end formation is tightly linked to transcription. However, we have now been able to obtain transcription-independent 3' box-dependent processing in vitro. This finally demonstrates that the 3' end of pre-snRNAs is produced by RNA processing rather than by termination of transcription. The phosphorylated form of the C-terminal domain (CTD) of pol II activates the processing event in vitro, consistent with our previous demonstration of the role of the CTD in pre-snRNA 3' end formation in vivo. In addition, we show that sequences upstream from the 3' box of the U2 snRNA gene influence 3' end formation both in vivo and in vitro.

A physical interaction between Gar1p and Rnt1pi is required for the nuclear import of H/ACA small nucleolar RNA-associated proteins

During rRNA biogenesis, multiple RNA and protein substrates are modified and assembled through the coordinated activity of many factors. In Saccharomyces cerevisiae, the double-stranded RNA nuclease Rnt1p and the H/ACA snoRNA pseudouridylase complex participate in the transformation of the nascent pre-rRNA transcript into 35S pre-rRNA. Here we demonstrate the binding of a component of the H/ACA complex (Gar1p) to Rnt1p in vivo and in vitro in the absence of other factors. In vitro, Rnt1p binding to Gar1p is mutually exclusive of its RNA binding and cleavage activities. Mutations in Rnt1p that disrupt Gar1p binding do not inhibit RNA cleavage in vitro but slow RNA processing, prevent nucleolar localization of H/ACA snoRNA-associated proteins, and reduce pre-rRNA pseudouridylation in vivo. These results demonstrate colocalization of various components of the rRNA maturation complex and suggest a mechanism that links rRNA pseudouridylation and cleavage factors.

Solution structure of conserved AGNN tetraloops: insights into Rnt1p RNA processing

Rnt1p, the yeast orthologue of RNase III, cleaves rRNAs, snRNAs and snoRNAs at a stem capped with conserved AGNN tetraloop. Here we show that 9 bp long stems ending with AGAA or AGUC tetraloops bind to Rnt1p and direct specific but sequence-independent RNA cleavage when provided with stems longer than 13 bp. The solution structures of these two tetraloops reveal a common fold for the terminal loop stabilized by non-canonical A-A or A-C pairs and extensive base stacking. The conserved nucleotides are stacked at the 5' side of the loop, exposing their Watson-Crick and Hoogsteen faces for recognition by Rnt1p. These results indicate that yeast RNase III recognizes the fold of a conserved single-stranded tetraloop to direct specific dsRNA cleavage.