Isolation of DNA from plants with large amounts of secondary metabolites

Two long read-based genome assembly and annotation of polyploidy woody plants, Hibiscus syriacus L. using PacBio and Nanopore platforms

Improvements in long read DNA sequencing and related techniques facilitated the generation of complex eukaryotic genomes. Despite these advances, the quality of constructed plant reference genomes remains relatively poor due to the large size of genomes, high content of repetitive sequences, and wide variety of ploidy. Here, we developed the de novo sequencing and assembly of high polyploid plant genome, Hibiscus syriacus, a flowering plant species of the Malvaceae family, using the Oxford Nanopore Technologies and Pacific Biosciences Sequel sequencing platforms. We investigated an efficient combination of high-quality and high-molecular-weight DNA isolation procedure and suitable assembler to achieve optimal results using long read sequencing data. We found that abundant ultra-long reads allow for large and complex polyploid plant genome assemblies with great recovery of repetitive sequences and error correction even at relatively low depth Nanopore sequencing data and polishing compared to previous studies. Collectively, our combination provides cost effective methods to improve genome continuity and quality compared to the previously reported reference genome by accessing highly repetitive regions. The application of this combination may enable genetic research and breeding of polyploid crops, thus leading to improvements in crop production.

Use of polypyrrole-polystyrene membranes for extracting DNA from plant tissues

We describe the preparation of a membrane composed of polypyrrole-polystyrene (PPy-PS) and its application in DNA extraction. We adopted the electrospinning technique to prepare polystyrene (PS) membranes, which we used as substrates for incorporating polypyrrole chains through an in situ chemical procedure. As a model system, we initially investigated the use of PPy-PS membranes for the extraction of salmon sperm DNA from aqueous solutions. These studies have shown that the PPy-PS membrane has a maximum adsorption capacity of 236.0 mg of DNA per gram of PPy after 30 min of exposure to a DNA solution (100 mg/L). We incorporated the PPy-PS membranes into centrifugation columns, which we used to carry out experiments for extracting and purification of DNA from curly lettuce leaves. The protocol was initially optimized by first examining the most appropriate concentration of the three components of the lysis buffer (Tris/HCl, NaCl, and EDTA-Na). We then investigated the most adequate volumes of the concentrated surfactant solution (SDS 20%) and that used in the protein and polysaccharide precipitation step (5 M potassium acetate, pH 6.3), factors that directly influence the quality and quantity of the fraction of DNA obtained. For curly lettuce leaves, both in their mature and young stages, the yield and purity of the DNA purified using the PPy-PS membrane were comparable to those obtained using a commercial kit. In both cases, the collected DNA samples presented excellent integrity and quality. These results are suggestive that these composite membranes are competitive with the commercial kits available for the extraction and purification of DNA from plants.

Green plant genomes: What we know in an era of rapidly expanding opportunities

Green plants play a fundamental role in ecosystems, human health, and agriculture. As de novo genomes are being generated for all known eukaryotic species as advocated by the Earth BioGenome Project, increasing genomic information on green land plants is essential. However, setting standards for the generation and storage of the complex set of genomes that characterize the green lineage of life is a major challenge for plant scientists. Such standards will need to accommodate the immense variation in green plant genome size, transposable element content, and structural complexity while enabling research into the molecular and evolutionary processes that have resulted in this enormous genomic variation. Here we provide an overview and assessment of the current state of knowledge of green plant genomes. To date fewer than 300 complete chromosome-scale genome assemblies representing fewer than 900 species have been generated across the estimated 450,000 to 500,000 species in the green plant clade. These genomes range in size from 12 Mb to 27.6 Gb and are biased toward agricultural crops with large branches of the green tree of life untouched by genomic-scale sequencing. Locating suitable tissue samples of most species of plants, especially those taxa from extreme environments, remains one of the biggest hurdles to increasing our genomic inventory. Furthermore, the annotation of plant genomes is at present undergoing intensive improvement. It is our hope that this fresh overview will help in the development of genomic quality standards for a cohesive and meaningful synthesis of green plant genomes as we scale up for the future.

Toxic effects of purified phenolic compounds from Acacia nilotica against common cutworm

Phenolics are the most abundant secondary metabolites of plants that are widely distributed in the plant kingdom. In the last few years, the development and identification of phenolic compounds from various plants have become a major area of the environment and health-related research. In the present study, different phenolic compounds were purified from the bark of the medicinally important plant Acacia nilotica which is rich in polyphenols and were evaluated for their insecticidal potential against a polyphagous pest, Spodoptera litura (Fab.). The compounds viz. Catechin, Chlorogenic acid, and Umbelliferone were purified from ethyl acetate-acetone (E-AE) fraction using Semi-preparative HPLC and were identified using melting point determination, Nuclear Magnetic Resonance (NMR), and Mass Spectroscopy (MS). These phenolic compounds recorded detrimental effects on the growth and development of second instar larvae (6 days old) of S. litura. The larval growth, survival, adult emergence, pupal weight, and different nutritional indices were adversely affected by the various concentrations of these purified compounds. The findings revealed the insecticidal potential of polyphenols obtained from the bark of A. nilotica, which can provide an alternative for resistance management, as these plant phytochemicals are highly effective against insecticide-resistant insect pests.

Improvement in molecular detection of phytoplasma associated with rose by selection of suitable primers and development of a multiplex PCR assay

Sensitive and effective phytoplasma DNA amplification in symptomatic rose cultivars is a long unresolved problem. In the present study, improvement in standardization for PCR assay for phytoplasma detection was established with rose samples by selection of various combinations of nested primer pairs of 16S ribosomal gene and secA gene. CTAB DNA extraction method was slightly modified by adding 2% polyvinyl pyrrolidone and increased the isopropanol volume which yielded better quality DNA. Best amplification results were achieved in nested PCR assay employing P1/P7, R16mF2/R16mR2 and R16F2n/R16R2, P1/P7 and R16mF2/R16mR2, and R16mF2/R16mR2 and fU5/rU3 primer pairs. Besides, a multiplex PCR assay was also developed and optimized for consistent identification of phytoplasma in rose samples by employing primer pairs of 16S rRNA and secA genes together in a single PCR reaction by optimizing annealing temperature at 55 °C.

Genetic and chemical diversity among yacon [Smallanthus sonchifolius (Poepp. et Endl.) H. Robinson] accessions based on iPBS markers and metabolomic fingerprinting

The present study is focused on the characterization of yacon [Smallanthus sonchifolius (Poepp. et Endl.) H. Robinson] accessions from different geographic origins (Bolivia, Ecuador, and Peru) by iPBS markers and metabolomic fingerprinting. The results showed that the number of amplified polymorphic fragment levels ranged from 20 up to 27 with a level of polymorphism ranging from 80 to 100%. Five of the iPBS primers used in this study provided no specific banding pattern able to discriminate between the different yacon accessions. However, two iPBS primer pairs were able to separate Peru accessions from those of Ecuador and Bolivia. The UPLC-HRMS/MS-based metabolomic fingerprinting showed highly similar metabolomic fingerprints characterized by the accumulation of high quantities of sesquiterpene lactones and diterpenes, but no apparent geographic clustering. The present study demonstrates that yacon accessions from different geographical origins maintained ex situ (in the Czech Republic) present a rather low chemical and genetic diversity.

A critical comparison of technologies for a plant genome sequencing project

BACKGROUND

A high-quality genome sequence of any model organism is an essential starting point for genetic and other studies. Older clone-based methods are slow and expensive, whereas faster, cheaper short-read-only assemblies can be incomplete and highly fragmented, which minimizes their usefulness. The last few years have seen the introduction of many new technologies for genome assembly. These new technologies and associated new algorithms are typically benchmarked on microbial genomes or, if they scale appropriately, on larger (e.g., human) genomes. However, plant genomes can be much more repetitive and larger than the human genome, and plant biochemistry often makes obtaining high-quality DNA that is free from contaminants difficult. Reflecting their challenging nature, we observe that plant genome assembly statistics are typically poorer than for vertebrates.

RESULTS

Here, we compare Illumina short read, Pacific Biosciences long read, 10x Genomics linked reads, Dovetail Hi-C, and BioNano Genomics optical maps, singly and combined, in producing high-quality long-range genome assemblies of the potato species Solanum verrucosum. We benchmark the assemblies for completeness and accuracy, as well as DNA compute requirements and sequencing costs.

CONCLUSIONS

The field of genome sequencing and assembly is reaching maturity, and the differences we observe between assemblies are surprisingly small. We expect that our results will be helpful to other genome projects, and that these datasets will be used in benchmarking by assembly algorithm developers.

Direct LAMP Assay without Prior DNA Purification for Sex Determination of Papaya

Papaya (Carica papaya L.) is an economically important tropical fruit tree with hermaphrodite, male and female sex types. Hermaphroditic plants are the major type used for papaya production because their fruits have more commercial advantages than those of female plants. Sex determination of the seedlings, or during the early growth stages, is very important for the papaya seedling industry. Thus far, the only method for determining the sex type of a papaya at the seedling stage has been DNA analysis. In this study, a molecular technique—based on DNA analysis—was developed for detecting male-hermaphrodite-specific markers to examine the papaya’s sex type. This method is based on the loop-mediated isothermal amplification (LAMP) and does not require prior DNA purification. The results show that the method is an easy, efficient, and inexpensive way to determine a papaya’s sex. This is the first report on the LAMP assay, using intact plant materials-without DNA purification-as samples for the analysis of sex determination of papaya. We found that using high-efficiency DNA polymerase was essential for successful DNA amplification, using trace intact plant material as a template DNA source.

Characterization of 13 microsatellite markers for Calochortus gunnisonii (Liliaceae) from Illumina MiSeq sequencing

PREMISE OF THE STUDY

Microsatellite primers were designed for Calochortus gunnisonii (Liliaceae), a montane lily species of the central and southern Rocky Mountains, using next-generation DNA sequencing. The markers will be used to investigate population structure, genetic diversity, and demographic history.

METHODS AND RESULTS

Thirteen polymorphic microsatellite loci were isolated from C. gunnisonii using Illumina MiSeq next-generation DNA sequencing and bioinformatic screening. The mean number of alleles per locus ranged from 4.15 to 5.92 (avg. = 4.97). Observed and expected heterozygosity ranged from 0.077 to 0.871 and 0.213 to 0.782, respectively. The primers were also tested for cross-species amplification value with C. flexuosus, C. nuttallii, C. kennedyi var. kennedyi, and C. subalpinus.

CONCLUSIONS

These primers will be useful for genetic and evolutionary studies across C. gunnisonii's range within the southern and central Rocky Mountains. Furthermore, these markers have proven valuable for cross-species amplifications within Calochortus.

Comparing DNA extraction methods for analysis of botanical materials found in anti-diabetic supplements

A comparative performance evaluation of DNA extraction methods from anti-diabetic botanical supplements using various commercial kits was conducted, to determine which produces the best quality DNA suitable for PCR amplification, sequencing and species identification. All plant materials involved were of suboptimal quality showing various levels of degradation and therefore representing real conditions for testing herbal supplements. Eight different DNA extraction methods were used to isolate genomic DNA from 13 medicinal plant products. Two methods for evaluation, DNA concentration measurements that included absorbance ratios as well as PCR amplifiability, were used to determine quantity and quality of extracted DNA. We found that neither DNA concentrations nor commonly used UV absorbance ratio measurements at A(260)/A(280) between 1.7 and 1.9 are suitable for globally predicting PCR success in these plant samples, and that PCR amplifiablity itself was the best indicator of extracted product quality. However, our results suggest that A(260)/A(280) ratios below about 1.3 and above 2.3 indicated a DNA quality too poor to amplify. Therefore, A(260)/A(280) measurements are not useful to identify samples that likely will amplify but can be used to exclude samples that likely will not amplify reducing the cost for unnecessarily subjecting samples to PCR. The two Nucleospin(®) plant II kit extraction methods produced the most pure and amplifiable genomic DNA extracts. Our results suggest that there are clear, discernable differences between extraction methods for low quality plant samples in terms of producing contamination-free, high-quality genomic DNA to be used for further analysis.

Optimization of Total RNA Isolation Method from the Aromatic Medicinal Plant Artemisia annua L

This paper is the first report on the development of a protocol that allows rapid and simplified extraction of total RNA from Artemisia annua L., an aromatic medicinal plant. This innovative protocol ensures a consistently high quantity and good quality of total RNA without any contamination of polyphenols, polysaccharides and proteins. The total RNA obtained is also free of fungal RNA even when extracted from fungal infested plants. The extraction buffer used in the proposed modified protocol was made up of non-hazardous chemicals. High concentrations of polyphenols of A. annua L. could be successfully eliminated and the prepared total RNA could be used for downstream reactions.

Evolutionary diversification and geographical isolation in Dubautia laxa (Asteraceae), a widespread member of the Hawaiian silversword alliance

BACKGROUND AND AIMS

The Hawaiian silversword alliance (Asteraceae) is one the best examples of a plant adaptive radiation, exhibiting extensive morphological and ecological diversity. No research within this group has addressed the role of geographical isolation, independent of ecological adaptation, in contributing to taxonomic diversity. The aims of this study were to examine genetic differentiation among subspecies of Dubautia laxa (Asteraceae) to determine if allopatric or sympatric populations and subspecies form distinct genetic clusters to understand better the role of geography in diversification within the alliance.

METHODS

Dubautia laxa is a widespread member of the Hawaiian silversword alliance, occurring on four of the five major islands of the Hawaiian archipelago, with four subspecies recognized on the basis of morphological, ecological and geographical variation. Nuclear microsatellites and plastid DNA sequence data were examined. Data were analysed using maximum-likelihood and Bayesian phylogenetic methodologies to identify unique evolutionary lineages.

KEY RESULTS

Plastid DNA sequence data resolved two highly divergent lineages, recognized as the Laxa and Hirsuta groups, that are more similar to other members of the Hawaiian silversword alliance than they are to each other. The Laxa group is basal to the young island species of Dubautia, whereas the Hirsuta group forms a clade with the old island lineages of Dubautia and with Argyroxiphium. The divergence between the plastid groups is supported by Bayesian microsatellite clustering analyses, but the degree of nuclear differentiation is not as great. Clear genetic differentiation is only observed between allopatric populations, both within and among islands.

CONCLUSIONS

These results indicate that geographical separation has aided diversification in D. laxa, whereas ecologically associated morphological differences are not associated with neutral genetic differentiation. This suggests that, despite the stunning ecological adaptation observed, geography has also played an important role in the Hawaiian silversword alliance plant adaptive radiation.

A simple and rapid method for DNA isolation from xylophagous insects

Published methods to isolate DNA from insects are not always effective in xylophagous insects because they have high concentrations of phenolics and other secondary plant compounds in their digestive tracts. A simple, reliable and labor-effective cetyltrimethylammonium bromide-polyvinylpyrrolidone (CTAB-PVP) method for isolation of high quality DNA from xylophagous insects is described. This method was successfully applied to PCR and restriction analysis, indicating removal of common inhibitors. DNA isolated by the CTAB-PVP method could be used in most molecular analyses.

Identification of Amazonian trees with DNA barcodes

BACKGROUND

Large-scale plant diversity inventories are critical to develop informed conservation strategies. However, the workload required for classic taxonomic surveys remains high and is particularly problematic for megadiverse tropical forests.

METHODOLOGY/PRINCIPAL FINDINGS

Based on a comprehensive census of all trees in two hectares of a tropical forest in French Guiana, we examined whether plant DNA barcoding could contribute to increasing the quality and the pace of tropical plant biodiversity surveys. Of the eight plant DNA markers we tested (rbcLa, rpoC1, rpoB, matK, ycf5, trnL, psbA-trnH, ITS), matK and ITS had a low rate of sequencing success. More critically, none of the plastid markers achieved a rate of correct plant identification greater than 70%, either alone or combined. The performance of all barcoding markers was noticeably low in few species-rich clades, such as the Laureae, and the Sapotaceae. A field test of the approach enabled us to detect 130 molecular operational taxonomic units in a sample of 252 juvenile trees. Including molecular markers increased the identification rate of juveniles from 72% (morphology alone) to 96% (morphology and molecular) of the individuals assigned to a known tree taxon.

CONCLUSION/SIGNIFICANCE

We conclude that while DNA barcoding is an invaluable tool for detecting errors in identifications and for identifying plants at juvenile stages, its limited ability to identify collections will constrain the practical implementation of DNA-based tropical plant biodiversity programs.