Photoaffinity labeling

Dissecting diazirine photo-reaction mechanism for protein residue-specific cross-linking and distance mapping

While photo-cross-linking (PXL) with alkyl diazirines can provide stringent distance restraints and offer insights into protein structures, unambiguous identification of cross-linked residues hinders data interpretation to the same level that has been achieved with chemical cross-linking (CXL). We address this challenge by developing an in-line system with systematic modulation of light intensity and irradiation time, which allows for a quantitative evaluation of diazirine photolysis and photo-reaction mechanism. Our results reveal a two-step pathway with mainly sequential generation of diazo and carbene intermediates. Diazo intermediate preferentially targets buried polar residues, many of which are inaccessible with known CXL probes for their limited reactivity. Moreover, we demonstrate that tuning light intensity and duration enhances selectivity towards polar residues by biasing diazo-mediated cross-linking reactions over carbene ones. This mechanistic dissection unlocks the full potential of PXL, paving the way for accurate distance mapping against protein structures and ultimately, unveiling protein dynamic behaviors.

Photo-Induced Cross-Linking of Unmodified α-Synuclein Oligomers

Photo-induced cross-linking of unmodified proteins (PICUP) has been used in the past to study size distributions of protein assemblies. PICUP may, for example, overcome the significant experimental challenges related to the transient nature, heterogeneity, and low concentration of amyloid protein oligomers relative to monomeric and fibrillar species. In the current study, a reaction chamber was designed, produced, and used for PICUP reaction optimization in terms of reaction conditions and lighting time from ms to s. These efforts make the method more reproducible and accessible and enable the use of shorter reaction times compared to previous studies. We applied the optimized method to an α-synuclein aggregation time course to monitor the relative concentration and size distribution of oligomers over time. The data are compared to the time evolution of the fibril mass concentration, as monitored by thioflavin T fluorescence. At all time points, the smaller the oligomer, the higher its concentration observed after PICUP. Moreover, the total oligomer concentration is highest at short aggregation times, and the decline over time follows the disappearance of monomers. We can therefore conclude that these oligomers form from monomers.

SulfoxFluor-enabled deoxyazidation of alcohols with NaN3

Direct deoxyazidation of alcohols with NaN₃ is a straightforward method for the synthesis of widely used alkyl azides in organic chemistry. However, known methods have some limitations such as high reaction temperatures and narrow substrate scope. Herein, a general and practical method for the preparation of alkyl azides from alcohols using NaN₃ has been developed. N-tosyl-4-chlorobenzenesulfonimidoyl fluoride (SulfoxFluor) plays an important role in this deoxyazidation process, which converts a broad range of alcohols into alkyl azides at room temperature. The power of this deoxyazidation protocol has been demonstrated by successful late-stage deoxyazidation of natural products and pharmaceutically relevant molecules.

Structure, Bonding, and Photoaffinity Labeling Applications of Dialkyldiazirines

Dialkyldiazirine photoaffinity probes are unparalleled tools for the study of small molecule–protein interactions. Here we summarize the basic principles of structure, bonding, and photoreactivity of dialkyldiazirines, current methods for their synthesis, and their practical application in photoaffinity labeling experiments. We demonstrate the unique utility of dialkyldiazirine probes in the context of our recent photoaffinity crosslinking-mass spectrometry analysis to reveal a hidden cholesterol binding site in the Hedgehog morphogen proteins.

1 Introduction

2 Structure, Bonding, and Spectral Properties

3 Photoreactivity

4 Synthesis

5 Application in Photoaffinity Labeling

6 Discovery of a Cholesterol–Hedgehog Protein Interface

7 Conclusions and Outlook

Photolabeling Strategies to Study Membranotropic Peptides Interacting with Lipids and Proteins in Membranes

Membranotropic peptides is a class of peptides that exert their biological action at the level of cell membranes. Understanding how they interact with their different membrane binding partners (lipids, proteins, and/or glycoconjugates) is important to decipher their mechanism of action. Affinity photolabeling is a powerful method to study noncovalent interactions and provide a submolecular picture of the contacts between two interacting partners. In this review, we give a panorama of photolabeling-based studies of the interactions between membranotropic peptides and membranes using either photoreactive lipids or peptides.

Theoretical study on the photochemistry of furoylazides: Curtius rearrangement and subsequent reactions

Organic azides are an efficient source of nitrenes, which serve as vigorous intermediates in many useful organic reactions. In this work, the complete active space self-consistent field (CASSCF) and its second-order perturbation (CASPT2) methods were employed to study the photochemistry of 2-furoylazide 1 and 3-furoylazide 5, including the Curtius rearrangement to two furylisocyanates (3 and 7) and subsequent reactions to the final product cyanoacrolein 9. Our calculations show that the photoinduced Curtius rearrangement of the two furoylazides takes place through similar stepwise mechanisms via two bistable furoylnitrenes 2 and 6. However, the decarbonylation and ring-opening process of 7 to 9 prefers a stepwise mechanism involving the 3-furoylnitrene intermediate 8, while 3 to 9 goes in a concerted asynchronous way without the corresponding 2-furoylnitrene intermediate 4. Importantly, we revealed that several conical intersections play key roles in the photochemistry of furoylazides. Our results are not only consistent and also make clear the experimental observations (X. Zeng, et al., J. Am. Chem. Soc., 2018, 140, 10-13), but additionally provide important information on the chemistry of furoylazides and nitrenes.

Fluoro Aryl Azides: Synthesis, Reactions and Applications

Background:

The complex photochemistry of aryl azides has fascinated scientists for several decades. Spectroscopists have investigated the intermediates formed by different analytical techniques. Theoretical chemists have explained the intrinsic interplay of intermediates under different experimental conditions.

Objective & Method:

A complete understanding of the photochemistry of a given fluoro aryl azide is a basic requisite for its use in chemistry. In this review, we will discuss the synthesis of several fluoro substituted aryl azides and the reactions and intermediates generated upon photolysis and thermolysis of these azides and some examples of their applications in photoaffinity labeling and organic synthesis.

Conclusion:

In spite of the extensive research on the photochemistry of fluoro aryl azides, there are some areas that remain to be investigated. The application of this reaction in the synthesis of novel heterocyclic compounds has not been fully studied. Since fluorophenyl azides are known to undergo C-H and N-H insertion reactions, they could be used to prepare new fluorinated molecules or in the biochemical process known as photoaffinity labeling.

Photochemical Reactions in the Synthesis of Protein-Drug Conjugates

The ability to modify biologically active molecules such as antibodies with drug molecules, fluorophores or radionuclides is crucial in drug discovery and target identification. Classic chemistry used for protein functionalisation relies almost exclusively on thermochemically mediated reactions. Our recent experiments have begun to explore the use of photochemistry to effect rapid and efficient protein functionalisation. This article introduces some of the principles and objectives of using photochemically activated reagents for protein ligation. The concept of simultaneous photoradiosynthesis of radiolabelled antibodies for use in molecular imaging is introduced as a working example. Notably, the goal of producing functionalised proteins in the absence of pre-association (non-covalent ligand-protein binding) introduces requirements that are distinct from the more regular use of photoactive groups in photoaffinity labelling. With this in mind, the chemistry of thirteen different classes of photoactivatable reagents that react through the formation of intermediate carbenes, electrophiles, dienes, or radicals, is assessed.

Simultaneous Photoradiochemical Labeling of Antibodies for Immuno-Positron Emission Tomography

A method for the simultaneous (one-step) photochemical conjugation and ⁸⁹Zr-radiolabeling of antibodies is introduced. A photoactivatable chelate based on the functionalization of desferrioxamine B with an arylazide moiety (DFO-ArN₃, [1]) was synthesized. The radiolabeled complex, ⁸⁹Zr-1⁺, was produced and characterized. Density functional theory calculations were used to investigate the mechanism of arylazide photoactivation. ⁸⁹Zr-radiolabeling experiments were also used to determine the efficiency of photochemical conjugation. A standard two-step approach gave a measured conjugation efficiency of 3.5% ± 0.4%. In contrast, the one-step process gave a higher photoradiolabeling efficiency of ∼76%. Stability measurements, cellular saturation binding assays, positron emission tomographic imaging, and biodistribution studies in mice bearing SK-OV-3 tumors confirmed the biochemical viability and tumor specificity of photoradiolabeled [⁸⁹Zr]ZrDFO-azepin-trastuzumab. Experimental data support the conclusion that the combination of photochemistry and radiochemistry is a viable strategy for producing radiolabeled proteins for imaging and therapy.

•

Photochemistry is combined with radiochemistry for radiosynthesis in a flash

•

Simultaneous photoradiochemistry is achieved with high radiolabeling efficiency

•

Photoradiochemistry produces viable ⁸⁹Zr-radiolabeled antibodies

•

Density functional theory calculations elucidate the photoactivation mechanism

Photochemical Conjugation and One-Pot Radiolabelling of Antibodies for Immuno-PET

Monoclonal antibodies (mAbs), immunoglobulin fragments, and other proteins are important scaffolds in the development of radiopharmaceuticals for diagnostic immuno-positron emission tomography (immuno-PET) and targeted radioimmunotherapy (RIT). Conventional methods for radiolabelling proteins with metal ions such as ⁶⁸ Ga, ⁶⁴ Cu, ⁸⁹ Zr, and ⁹⁰ Y require multi-step procedures involving pre-purification, functionalisation with a chelate, and subsequent radiolabelling. Standard coupling chemistries are time-consuming, difficult to automate, and involve synthesis, isolation, and storage of an intermediate, new molecular entity (the conjugated mAb) whose biochemical properties can differ from those of the parent protein. To circumvent these issues, we developed a photoradiochemical approach that uses fast, chemoselective, light-induced protein modification under mild conditions with novel metal-ion-binding chelates derivatised with aryl azide (ArN₃ ) groups. Experiments show that one-pot photochemical conjugation and radiolabelling of formulated mAbs can be achieved in <20 min.

Photoactivatable oligonucleotide probes to trap single-stranded DNA binding proteins: Updating the potential of 4-thiothymidine from a comparative study

Photoaffinity labeling (PAL) in combination with recent developments in mass spectrometry is a powerful tool for studying nucleic acid-protein interactions, enabling crosslinking of both partners through covalent bond formation. Such a strategy requires a preliminary study of the most judicious photoreactive group to crosslink efficiently with the target protein. In this study, we report a survey of three different photoreactive nucleobases (including a guanine functionalized with a benzophenone or a diazirine and the zero-length agent 4-thiothymine) incorporated in 30-mer oligonucleotides (ODN) containing a biotin moiety for selective trapping and enrichment of single-stranded DNA binding proteins (SSB). First, the conditions and efficiency of the photochemical reaction with a purified protein using human replication protein A as the relevant model was studied. Secondly, the ability of the probe as bait to photocrosslink and enrich SSB in cell lysate was addressed. Among the different ODN probes studied, we showed that 4-thiothymine was the most relevant: i) it allows efficient and specific trapping of SSB in whole cell extracts in a similar extent as the widely used diazirine, ii) it features the advantages of a zero-length agent thus retaining the physicochemical properties of the ODN bait; iii) ODN including this photochemical agent are easily accessible. In combination with mass spectrometry, the probes incorporating this nucleobase are powerful tools for PAL strategies and can be added in the toolbox of the traditional photocrosslinkers for studying DNA-protein interactions.

Current advances of carbene-mediated photoaffinity labeling in medicinal chemistry

Photoaffinity labeling (PAL) in combination with a chemical probe to covalently bind its target upon UV irradiation has demonstrated considerable promise in drug discovery for identifying new drug targets and binding sites. In particular, carbene-mediated photoaffinity labeling (cmPAL) has been widely used in drug target identification owing to its excellent photolabeling efficiency, minimal steric interference and longer excitation wavelength. Specifically, diazirines, which are among the precursors of carbenes and have higher carbene yields and greater chemical stability than diazo compounds, have proved to be valuable photolabile reagents in a diverse range of biological systems. This review highlights current advances of cmPAL in medicinal chemistry, with a focus on structures and applications for identifying small molecule-protein and macromolecule-protein interactions and ligand-gated ion channels, coupled with advances in the discovery of targets and inhibitors using carbene precursor-based biological probes developed in recent decades.

In Vivo Photo-Cross-Linking to Study T3S Interactions Demonstrated Using the Yersinia pestis T3S System

Cross-linking of proteins is effective in determining protein-protein interactions. The use of photo-cross-linkers was developed to study protein interactions in several manners. One method involved the incorporation of photo-activatable cross-linking groups into chemically synthesized peptides. A second approach relies on incorporation of photo-activatable cross-linking groups into proteins using tRNAs with chemically bound photo-activatable amino acids with suppressor tRNAs translational systems to incorporate the tags into specific sites. A third system was made possible by the development of photoreactive amino acids that use the normal cellular tRNAs and aminoacyl tRNA synthetases. In this method, the third system is used to demonstrate its utility for the study of T3S system interactions. This method describes how two photo-activatable amino acids, photo-methionine and photo-leucine, that use the normal cellular machinery are incorporated into Yersinia pestis and used to study interactions in the T3S system. To demonstrate the system, the method was used to cross-link the T3S regulatory proteins LcrG and LcrV.

Diazo Compounds: Versatile Tools for Chemical Biology

Diazo groups have broad and tunable reactivity. That and other attributes endow diazo compounds with the potential to be valuable reagents for chemical biologists. The presence of diazo groups in natural products underscores their metabolic stability and anticipates their utility in a biological context. The chemoselectivity of diazo groups, even in the presence of azido groups, presents many opportunities. Already, diazo compounds have served as chemical probes and elicited novel modifications of proteins and nucleic acids. Here, we review advances that have facilitated the chemical synthesis of diazo compounds, and we highlight applications of diazo compounds in the detection and modification of biomolecules.

The diverse and expanding role of mass spectrometry in structural and molecular biology

The emergence of proteomics has led to major technological advances in mass spectrometry (MS). These advancements not only benefitted MS-based high-throughput proteomics but also increased the impact of mass spectrometry on the field of structural and molecular biology. Here, we review how state-of-the-art MS methods, including native MS, top-down protein sequencing, cross-linking-MS, and hydrogen-deuterium exchange-MS, nowadays enable the characterization of biomolecular structures, functions, and interactions. In particular, we focus on the role of mass spectrometry in integrated structural and molecular biology investigations of biological macromolecular complexes and cellular machineries, highlighting work on CRISPR-Cas systems and eukaryotic transcription complexes.

Exploring the flexible chemistry of 4-fluoro-3-nitrophenyl azide for biomolecule immobilization and bioconjugation

Bioconjugation and functionalization of polymer surfaces are two major tasks in materials chemistry which are accomplished using a variety of coupling agents. Immobilization of biomolecules onto polymer surfaces and the construction of bioconjugates are essential requirements of many biochemical assays and chemical syntheses. Different linkers with a variety of functional groups are used for these purposes. Among them, the benzophenones, aryldiazirines, and arylazides represent the most commonly used photolinker to produce the desired chemical linkage upon their photo-irradiation. In this review, we describe the versatile applications of 4-fluoro-3-nitrophenyl azide, one of the oldest photolinkers used for photoaffinity labeling in the late 1960s. Surprisingly, this photolinker, historically known as 1-fluoro-2-nitro-4-azidobenzene (FNAB), has remained unexplored for a long time because of apprehension that FNAB forms ring-expanded dehydroazepine as a major product and hence cannot activate an inert polymer. The first evidence of photochemical activation of an inert surface by FNAB through nitrene insertion reaction was reported in 2001, and the FNAB-activated surface was found to conjugate a biomolecule without any catalyst, reagent, or modification. FNAB has distinct advantages over perfluorophenyl azide derivatives, which are contemporary nitrene-generating photolinkers, because of its simple, single-step preparation and ease of thermochemical and photochemical reactions with versatile polymers and biomolecules. Covering these aspects, the present review highlights the flexible chemistry of FNAB and its applications in the field of surface engineering, immobilization of biomolecules such as antibodies, enzymes, cells, carbohydrates, oligonucleotides, and DNA aptamers, and rapid diagnostics. Graphical Abstract An overview of the FNAB-engineered activated polymer surfaces for covalent ligation of versatile biomolecules.

Optical control of endogenous receptors and cellular excitability using targeted covalent photoswitches

Light-regulated drugs allow remotely photoswitching biological activity and enable plausible therapies based on small molecules. However, only freely diffusible photochromic ligands have been shown to work directly in endogenous receptors and methods for covalent attachment depend on genetic manipulation. Here we introduce a chemical strategy to covalently conjugate and photoswitch the activity of endogenous proteins and demonstrate its application to the kainate receptor channel GluK1. The approach is based on photoswitchable ligands containing a short-lived, highly reactive anchoring group that is targeted at the protein of interest by ligand affinity. These targeted covalent photoswitches (TCPs) constitute a new class of light-regulated drugs and act as prosthetic molecules that photocontrol the activity of GluK1-expressing neurons, and restore photoresponses in degenerated retina. The modularity of TCPs enables the application to different ligands and opens the way to new therapeutic opportunities.

Biological activity can be photoswitched by light-regulated drugs, but so far only diffusible ligands have been shown to work on endogenous receptors. Here the authors develop targeted covalent photoswitches that couple to a protein target by ligand affinity, and demonstrate photocontrol of GluK1-expressing neurons.

Protein-polymer conjugation via ligand affinity and photoactivation of glutathione S-transferase

A photoactivated, site-selective conjugation of poly(ethylene glycol) (PEG) to the glutathione (GSH) binding pocket of glutathione S-transferase (GST) is described. To achieve this, a GSH analogue (GSH-BP) was designed and chemically synthesized with three functionalities: (1) the binding affinity of GSH to GST, (2) a free thiol for polymer functionalization, and (3) a photoreactive benzophenone (BP) component. Different molecular weights (2 kDa, 5 kDa, and 20 kDa) of GSH-BP modified PEGs (GSBP-PEGs) were synthesized and showed conjugation efficiencies between 52% and 76% to GST. Diazirine (DA) PEG were also prepared but gave conjugation yields lower than for GSBP-PEGs. PEGs with different end-groups were also synthesized to validate the importance of each component in the end-group design. End-groups included glutathione (GS-PEG) and benzophenone (BP-PEG). Results showed that both GSH and BP were crucial for successful conjugation to GST. In addition, conjugations of 5 kDa GSBP-PEG to different proteins were investigated, including bovine serum albumin (BSA), lysozyme (Lyz), ubiquitin (Ubq), and GST-fused ubiquitin (GST-Ubq) to ensure specific binding to GST. By combining noncovalent and covalent interactions, we have developed a new phototriggered protein–polymer conjugation method that is generally applicable to GST-fusion proteins.

P2X receptor intermediate activation states have altered nucleotide selectivity

Purinergic P2X receptors are widely distributed in the nervous system and are known to play roles in primary afferent transmission and central respiratory regulation. They are trimeric membrane proteins, with the extracellular domain that provides three intersubunit ATP binding sites. We expressed the rat P2X7 receptor in human embryonic kidney cells and measured membrane currents before and after photo-affinity labeling with the agonist 2'(3')-O-(4-benzoylbenzoyl)-ATP (BzATP). After tethering BzATP with ultraviolet light, a persistent current remained after washing out the agonist. Additional current could now be elicited by other nucleotides (CTP and ADP) that are not normally effective as P2X receptor agonists. Similar results were obtained at P2X2 receptors even without previous agonist tethering: exposure to low concentrations of ATP caused the receptor to become sensitive to activation by CTP and ADP. The results show that ATP binding to the first of the three binding sites causes a conformational change to an intermediate closed state that shows increased effectiveness of pyrimidine and diphosphate nucleotide analogs.

Photoaffinity labeling of plasma proteins

Photoaffinity labeling is a powerful technique for identifying a target protein. A high degree of labeling specificity can be achieved with this method in comparison to chemical labeling. Human serum albumin (HSA) and α₁-acid glycoprotein (AGP) are two plasma proteins that bind a variety of endogenous and exogenous substances. The ligand binding mechanism of these two proteins is complex. Fatty acids, which are known to be transported in plasma by HSA, cause conformational changes and participate in allosteric ligand binding to HSA. HSA undergoes an N-B transition, a conformational change at alkaline pH, that has been reported to result in increased ligand binding. Attempts have been made to investigate the impact of fatty acids and the N-B transition on ligand binding in HSA using ketoprofen and flunitrazepam as photolabeling agents. Meanwhile, plasma AGP is a mixture of genetic variants of the protein. The photolabeling of AGP with flunitrazepam has been utilized to shed light on the topology of the protein ligand binding site. Furthermore, a review of photoaffinity labeling performed on other major plasma proteins will also be discussed. Using a photoreactive natural ligand as a photolabeling agent to identify target protein in the plasma would reduce non-specific labeling.

Perfluorophenyl azides: new applications in surface functionalization and nanomaterial synthesis

A major challenge in materials science is the ongoing search for coupling agents that are readily synthesized, capable of versatile chemistry, able to easily functionalize materials and surfaces, and efficient in covalently linking organic and inorganic entities. A decade ago, we began a research program investigating perfluorophenylazides (PFPA) as the coupling agents in surface functionalization and nanomaterial synthesis. The p-substituted PFPAs are attractive heterobifunctional coupling agents because of their two distinct and synthetically distinguishable reactive centers: (i) the fluorinated phenylazide, which is capable of forming stable covalent adducts, and (ii) the functional group R, which can be tailored through synthesis. Two approaches have been undertaken for material synthesis and surface functionalization. The first method involves synthesizing PFPA bearing the first molecule or material with a functional linker R and then attaching the resulting PFPA to the second material by activating the azido group. In the second approach, the material surface is first functionalized with PFPA via functional center R, and coupling of the second molecule or material is achieved with the surface azido groups. In this Account, we review the design and protocols of the two approaches, providing examples in which PFPA derivatives were successfully used in material surface functionalization, ligand conjugation, and the synthesis of hybrid nanomaterials. The methods developed have proved to be general and versatile, and they are applicable to a wide range of materials (especially those that lack reactive functional groups or are difficult to derivatize) and to various substrates of polymers, oxides, carbon materials, and metal films. The coupling chemistry can be initiated by light, heat, and electrons. Patterned structures can be generated by selectively activating the areas of interest. Furthermore, the process is easy to perform, and light activation occurs in minutes, greatly facilitating the efficiency of the reaction. PFPAs indeed demonstrate many benefits as versatile surface coupling agents and offer opportunities for further exploration.

Photoaffinity labeling of an herbicide receptor protein in chloroplast membranes

2-Azido-4-ethylamino-6-isopropylamino-s-triazine (azido-atrazine) inhibits photosynthetic electron transport at a site identical to that affected by atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine). The latter is a well-characterized inhibitor of photosystem II reactions. Azido-atrazine was used as a photoaffinity label to identify the herbicide receptor protein; UV irradiation of chloroplast thylakoids in the presence of azido[(14)C]atrazine resulted in the covalent attachment of radioactive inhibitor to thylakoid membranes isolated from pea seedlings and from a triazine-susceptible biotype of the weed Amaranthus hybridus. No covalent binding of azido-atrazine was observed for thylakoid membranes isolated from a naturally occurring triazine-resistant biotype of A. hybridus. Analysis of thylakoid polypeptides from both the susceptible and resistant A. hybridus biotypes by sodium dodecyl sulfate/polyacrylamide gel electrophoresis, followed by fluorography to locate (14)C label, demonstrated specific association of the azido[(14)C]atrazine with polypeptides of the 34- to 32-kilodalton size class in susceptible but not in resistant membranes.

Ultraviolet crosslinking of DNA protein complexes via 8-azidoadenine

The synthesis of 8-azido-2'-deoxyadenosine-5'-triphosphate is described. The photoreactive dATP analog was characterized by thin layer chromatography and UV spectroscopy. Its photoreactivity upon UV irradiation was studied. After incorporation of this dATP analog by nick translation into DNA containing the tet operator sequence the investigation of the interactions between tet operator DNA and Tet repressor becomes possible. Photocrosslinking of protein to DNA was demonstrated by the reduced migration of the DNA protein crosslinks in SDS polyacrylamide gel electrophoresis.

Interconversion of Nitrenes, Carbenes, and Nitrile Ylides by Ring Expansion, Ring Opening, Ring Contraction, and Ring Closure: 3-Quinolylnitrene, 2-Quinoxalylcarbene, and 3-Quinolylcarbene

Photolysis of 3-azidoquinoline 6 in an Ar matrix generates 3-quinolylnitrene 7, which is characterized by its electron spin resonance (ESR), UV, and IR spectra in Ar matrices. Nitrene 7 undergoes ring opening to a nitrile ylide 19, also characterized by its UV and IR spectra. A subsequent 1,7-hydrogen shift in the ylide 19 affords 3-(2-isocyanophenyl)ketenimine 20. Matrix photolysis of 1,2,3-triazolo[1,5-c]quinoxaline 26 generates 4-diazomethylquinazoline 27, followed by 4-quinazolylcarbene 28, which is characterized by ESR and IR spectroscopy. Further photolysis of carbene 28 slowly generates ketenimine 20, thus suggesting that ylide 19 is formed initially. Flash vacuum thermolysis (FVT) of both 6 and 26 affords 3-cyanoindole 22 in high yield, thereby indicating that carbene 28 and nitrene 7 enter the same energy surface. Matrix photolysis of 3-quinolyldiazomethane 30 generates 3-quinolylcarbene 31, which on photolysis at >500 nm reacts with N2 to regenerate diazo compound 30. Photolysis of 30 in the presence of CO generates a ketene (34). 3-Quinolylcarbene 31 cyclizes on photolysis at >500 nm to 5-aza-2,3-benzobicyclo[4.1.0]hepta-2,4,7-triene 32. Both 31 and 32 are characterized by their IR and UV spectra. FVT of 30 yields a mixture of 2- and 3-cyanoindenes via a carbene–carbene–nitrene rearrangement 31 → 2-quinolylcarbene 39 → 1-naphthylnitrene 43. The reaction mechanisms are supported by density functional theory calculations of the energies and spectra of all relevant ground and transition state structures at the B3LYP/6–31G* level.

Interacting targets of the farnesyl of transducin gamma-subunit

G protein gamma-subunits are isoprenylated and carboxyl methylated at the C-terminal cysteine residue, and the set of the posttranslational modifications is indispensable for the function of the photoreceptor G protein transducin (Talpha/Tbetagamma). To explore farnesyl-mediated molecular interactions, we investigated molecular targets of a Tbetagamma analogue that was engineered to have a photoreactive farnesyl analogue, (3-azidophenoxy)geranyl (POG), covalently bound to the C-terminal cysteine of Tgamma. POG-modified Tbetagamma was further subjected to modification by methylation at the C-terminal carboxyl group, which copies a complete set of the known posttranscriptional modifications of Tbetagamma. Photoaffinity labeling experiment with the photoreactive Tbetagamma analogue in its free form indicated that the POG moiety of Tgamma interacted with Tbeta. In the trimeric Talpha/Tbetagamma complex, the POG moiety was cross-linked with Talpha in addition to concurrent affinity labeling of Tbeta. When photoreactive Tbetagamma was reconstituted with Talpha and light-activated rhodopsin (Rh*) in rod outer segment (ROS) membranes, the POG moiety interacted with not only Talpha and Tbeta but also Rh* and membrane phospholipids. The cross-linked phospholipid species was analyzed by ELISA employing a variety of lipid-binding probes, which revealed phosphatidylethanolamine (PE) and phosphatidylserine (PS) as selective phospholipids for POG interaction in the ROS membranes. These results demonstrate that the modifying group of Tgamma plays an active role in protein-protein and protein-membrane interactions and suggest that the farnesyl-PE/PS interaction may support the efficient formation of the signaling ternary complex between transducin and Rh*.

Disaccharide analogs as probes for glycosyltransferases in Mycobacterium tuberculosis

Glycosyltransferases (GTs) play a crucial role in mycobacterial cell wall biosynthesis and are necessary for the survival of mycobacteria. Hence, these enzymes are potential new drug targets for the treatment of tuberculosis (TB), especially multiple drug-resistant TB (MDR-TB). Herein, we report the efficient syntheses of Araf(alpha 1-->5)Araf, Galf(beta 1-->5)Galf, and Galf(beta 1-->6)Galf disaccharides possessing a 5-N,N-dimethylaminonaphthalene-1-sulfonamidoethyl (dansyl) unit that were prepared as fluorescent disaccharide acceptors for arabinosyl- and galactosyl-transferases, respectively. Such analogs may offer advantages relative to radiolabeled acceptors or donors for studying the enzymes and for assay development and compound screening. Additionally, analogs possessing a 5-azidonaphthalene-1-sulfonamidoethyl unit were prepared as photoaffinity probes for their potential utility in studying active site labeling of the GTs (arabinosyl and galactosyl) in Mycobacterium tuberculosis (MTB). Beyond their preparation, initial biological testing and kinetic analysis of these disaccharides as acceptors toward glycosyltransferases are also presented.

Design and synthesis of photoaffinity-labeling ligands of the L-prolyl-L-leucylglycinamide binding site involved in the allosteric modulation of the dopamine receptor

Pro-Leu-Gly-NH(2) (PLG), in addition to its endocrine effects, possesses the ability to modulate dopamine D(2) receptors within the central nervous system. However, the precise binding site of PLG is unknown. Potential photoaffinity-labeling ligands of the PLG binding site were designed as tools to be used in the identification of the macromolecule that possesses this binding site. Six different photoaffinity-labeling ligands were designed and synthesized on the basis of the gamma-lactam PLG peptidomimetic 1. The 4-azidobenzoyl and 4-azido-2-hydroxybenzoyl photoaffinity-labeling moieties were placed at opposite ends of PLG peptidomimetic 1 to generate a series of ligands that potentially could be used to map the PLG binding site. All of the compounds that were synthesized possessed activity comparable to or better than PLG in enhancing [(3)H]-N-propylnorapomorphine agonist binding to dopamine receptors. Photoaffinity ligands that were cross-linked to the receptor preparation produced a modulatory effect that was either comparable to or greater than the increase in agonist binding produced by the respective ligands that were not cross-linked to the dopamine receptor. The results indicate that these photoaffinity-labeling agents are binding at the same allosteric site as PLG and PLG peptidomimetic 1.

The design and synthesis of YC-1 analogues as probes for soluble guanylate cyclase

Soluble guanylate cyclase (sGC) is highly activated in the presence of both YC-1 (1-benzyl-3-(5'-hydroxymethyl-2'-furyl)-indazole) and CO. In this report, the design, synthesis, and activity (i.e., sGC activation) of photolabile analogues of 3-(5'-hydroxymethyl-2'-furyl)-1-benzylindazole (YC-1) are presented. Initial results with 6-azido-3-(5'-hydroxymethyl-2'-furyl)-1-benzylindazole led to the synthesis of a tritium-labeled analogue. When photoactivated, this analogue labeled the alpha-subunit of sGC.

Photochemical tools for remote control of ion channels in excitable cells

Various strategies have been developed recently for imparting light sensitivity onto normally insensitive cells. These include expression of natural photosensitive proteins, photolysis of caged agonists of native cell surface receptors and photoswitching of isomerizable tethered ligands that act on specially engineered ion channels and receptor targets. The development of chemical tools for optically stimulating or inhibiting signaling proteins has particular relevance for the nervous system, where precise, noninvasive control is an experimental and medical necessity.

Chemical cross-linking and protein-protein interactions-a review with illustrative protocols

The general term "protein-protein" interactions refers to the effects of proteins upon each other. The interactions can arise from co-existence in organized structural arrangements or in transient encounters. The latter are difficult to detect and define. Introduction of specific, stable chemical linkages can establish permanent relationships between what would normally be transiently associated species. The review covers the types and purposes of various linkers, including the comparative advantages of various approaches. The emphasis is on practical applications and thus includes methodology in the form of practical protocols for introducing the linkages and interpreting the outcomes.