Recovery of monomolecular films in studies of lipolysis

A Valuable Product of Microbial Cell Factories: Microbial Lipase

As a powerful factory, microbial cells produce a variety of enzymes, such as lipase. Lipase has a wide range of actions and participates in multiple reactions, and they can catalyze the hydrolysis of triacylglycerol into its component free fatty acids and glycerol backbone. Lipase exists widely in nature, most prominently in plants, animals and microorganisms, among which microorganisms are the most important source of lipase. Microbial lipases have been adapted for numerous industrial applications due to their substrate specificity, heterogeneous patterns of expression and versatility (i.e., capacity to catalyze reactions at the extremes of pH and temperature as well as in the presence of metal ions and organic solvents). Now they have been introduced into applications involving the production and processing of food, pharmaceutics, paper making, detergents, biodiesel fuels, and so on. In this mini-review, we will focus on the most up-to-date research on microbial lipases and their commercial and industrial applications. We will also discuss and predict future applications of these important technologies.

Methods for detection and characterization of lipases: A comprehensive review

Microbial lipases are very prominent biocatalysts because of their ability to catalyze a wide variety of reactions in aqueous and non-aqueous media. The chemo-, regio- and enantio-specific behaviour of these enzymes has caused tremendous interest among scientists and industrialists. Lipases from a large number of bacterial, fungal and a few plant and animal sources have been purified to homogeneity. This article presents a critical review of different strategies which have been employed for the detection, purification and characterization of microbial lipases.

Gly311 residue triggers the enantioselectivity of Staphylococcus xylosus lipase: A monolayer study

Using emulsified triacylglycerols, we have shown recently [Mosbah et al., 2007, submitted for publication] that amino acid residue G311 of Staphylococcus xylosus lipase (SXL) is critically involved in substrate selectivity, pH and temperature dependency. Using the monomolecular film technique, we show in the present study that the four single mutants of this residue (G311L, G311W, G311D, and G311K), interact efficiently with egg-phosphatidyl choline (egg-PC) monomolecular films, comparably to the wild-type (G311). A critical surface pressure (pi(c)) of about 25 mN/m was obtained with the SXL wild-type (SXL-WT) and its mutants. These results support our conclusion that the G311 residue is not involved in the interfacial adsorption step of SXL. A kinetic study on the surface pressure dependency, stereoselectivity, and regioselectivity of SXL-WT and its G311 mutants was also performed using optically pure enantiomers of diacylglycerols (1,2-sn-dicaprin and 2,3-sn-dicaprin) and a prochiral isomer (1,3-sn-dicaprin) spread as monomolecular films at the air-water interface. Our results indicated that the mutation of one single residue at position 311 affects critically the catalytic activity, the stereo- and the regioselectivity of SXL. As previously observed with emulsified substrates [Mosbah et al., 2007, submitted for publication] we observed that an increase in the size of the 311 amino acid side chain residue was accompanied by a decrease of lipase activity measured on dicaprin monolayer. We also noticed that the substitution of G311 by a basic or acidic residue (G311K and G311D), induces a significant shift of the pH optimum from 8 to 9.5 or from 8 to 6.5, respectively.

The N-terminal His-tag affects the enantioselectivity of staphylococcal lipases: a monolayer study

In order to check the influence of the polyhistidine tag at the N-terminus of recombinant lipases, a comparative study on the interfacial properties of native and recombinant Staphylococcus simulans (SSL and rSSL) or Staphylococcus xylosus lipase (SXL and rSXL) was investigated using the monomolecular film technique. No phospholipase activity was detected with rSSL or rSXL when using different phospholipids spread as monomolecular films maintained at various surface pressures, suggesting that the His-tag in the N-terminus of the recombinant proteins, do not affect the substrate recognition. The critical surface pressure measured with monomolecular films of egg-PC was slightly lowered with the two recombinant proteins compared to the native SSL or SXL one. A kinetic study on the surface pressure dependency, stereoselectivity and regioselectivity of native and recombinant SSL or SXL was performed using three dicaprin isomers spread as monomolecular films at the air-water interface. Our results show clearly that the presence of polyhistidine tag at the N-terminus of SSL or SXL changes their stereo- and regioselectivity.

Atomic force microscope visualization of lipid bilayer degradation due to action of phospholipase A2 and Humicola lanuginosa lipase

An important application of liquid cell Atomic Force Microscopy (AFM) is the study of enzyme structure and behaviour in organized molecular media that mimic in-vivo systems. In this study we demonstrate the use of AFM as a tool to study the kinetics of lipolytic enzyme reactions occurring at the surface of a supported lipid bilayer. In particular, the time course of the degradation of lipid bilayers by Phospholipase A(2) (PLA(2)) and Humicola Lanuginosa Lipase (HLL) has been investigated. Contact mode imaging allows visualization of enzyme activity on the substrate with high lateral resolution. Lipid bilayers were prepared by the Langmuir-Blodgett technique and transferred to an AFM liquid cell. Following injection of the enzyme into the liquid cell, a sequence of images was acquired at regular time intervals to allow the identification of substrate structure, preferred sites of enzyme activation, and enzyme reaction rates.

Kinetics of the surface hydrolysis of raw starch by glucoamylase

The hydrolysis of raw starch catalyzed by glucoamylase has been studied with starch granules of different sizes by use of an amperometric glucose sensor by which the direct and continuous observation of the concentration of glucose can be achieved even in a thick raw starch suspension. The initial rate of the enzymatic hydrolysis in the raw starch suspension increased with increasing concentration of the enzyme to approach a saturation value and was proportional to the amount of substrate. Also, the rate was proportional to the specific surface area of the substrate. The experimental results can be explained well by the rate equations derived from a three-step mechanism, which consists of adsorption of the free enzyme onto the surface of the substrate, reaction of the adsorbed enzyme with the substrate, and liberation of the product.

Peripheral protein adsorption to lipid-water interfaces: the free area theory

In fluid monolayers approaching collapse, phospholipids and their complexes with diacylglycerols hinder adsorption to the monolayer of the amphipathic protein, colipase. Herein, a statistical, free-area model, analogous to that used to analyze two-dimensional lipid diffusion, is developed to describe regulation by lipids of the initial rate of protein adsorption from the bulk aqueous phase to the lipid-water interface. It is successfully applied to rate data for colipase adsorption to phospholipid alone and yields realistic values of the two model parameters; the phospholipid excluded area and the critical free surface area required to initiate adsorption. The model is further developed and applied to analyze colipase adsorption rates to mixed monolayers of phospholipid and phospholipid-diacylglycerol complexes. The results are consistent with complexes being stably associated over the physiologically relevant range of lipid packing densities and being randomly distributed with uncomplexed phospholipid molecules. Thus, complexes should form in fluid regions of cellular membranes at sites of diacylglycerol generation. If so, by analogy with the behavior of colipase, increasing diacylglycerol may not trigger translocation of some amphipathic peripheral proteins until its abundance locally exceeds its mole fraction in complexes with membrane phospholipids.

Real-time measurement of solute partitioning to lipid monolayers

The interaction of a peripheral protein with a lipid-water interface can show a pronounced dependence on the composition and two-dimensional packing density of the lipids that comprise the interface. We report a novel optical method for measuring the adsorption of macromolecules, such as proteins and nucleic acids, and smaller solutes, such as drugs, to lipid monolayers at the gas-liquid interface. Using fluorescence emission from proteins and a small molecule, we demonstrate that the emissions from these solutes when in the aqueous phase and when associated with the monolayer can be temporally separated. Such separation allows measurement of the extent of solute adsorption, spectral characterization of the adsorbed solute, and characterization of lipid organization using adsorption kinetics. The method does not require, but is compatible with, the solute having different spectral properties in the bulk and surface phases. Indeed, if optical signals from adsorbed and soluble solute are the same or their relationship is known, absolute surface excess of adsorbed solute can be calculated without independent calibration. With appropriate instrumental configuration, the method should be adaptable for screening solutes for interaction with planar monolayers having both well-defined composition and adjustable lipid packing density.

X-ray reflectivity studies of cPLA2{alpha}-C2 domains adsorbed onto Langmuir monolayers of SOPC

X-ray reflectivity is used to study the interaction of C2 domains of cytosolic phospholipase A(2) (cPLA(2)alpha-C2) with a Langmuir monolayer of 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) supported on a buffered aqueous solution containing Ca(2+). The reflectivity is analyzed in terms of the known crystallographic structure of cPLA(2)alpha-C2 domains and a slab model representing the lipid layer to yield an electron density profile of the lipid layer and bound C2 domains. This new method of analysis determines the angular orientation and penetration depth of the cPLA(2)alpha-C2 domains bound to the SOPC monolayer, information not available from the standard slab model analysis of x-ray reflectivity. The best-fit orientation places the protein-bound Ca(2+) ions within 1 A of the lipid phosphate group (with an accuracy of +/-3 A). Hydrophobic residues of the calcium-binding loops CBL1 and CBL3 penetrate deepest into the lipid layer, with a 2 A penetration into the tailgroup region. X-ray measurements with and without the C2 domain indicate that there is a loss of electrons in the headgroup region of the lipid monolayer upon binding of the domains. We suggest that this is due to a loss of water molecules bound to the headgroup. Control experiments with a non-calcium buffer and with domain mutants confirm that the cPLA(2)alpha-C2 binding to the SOPC monolayer is Ca(2+)-dependent and that the hydrophobic residues in the calcium-binding loops are critical for membrane binding. These results indicate that an entropic component (due to water loss) as well as electrostatic and hydrophobic interactions contributes to the binding mechanism.

Real-Time Observation for the Enzymatic Reaction of Phospholipid Membrane: Application of the Time-Resolved Quasi-Elastic Laser Scattering Method

An analytical technique to measure reactions in biological membranes was developed and applied to monitoring the hydrolysis reaction of phospholipids (dipalmitoylphosphatidylcholine, DPPC) by phospholipase A(2). The technique uses the time-resolved quasi-elastic laser scattering (TR-QELS) method to measure an oil/phospholipid monolayer/water membrane system by monitoring the change of interfacial tension under a noncontact condition and in real time. When the TR-QELS method is used with the newly developed oil/phospholipid monolayer/water membrane system, measurement of the hydrolysis reaction of phospholipids with long alkyl chains (C >or=16), which are the major components in biological membranes, becomes possible. The reaction progress is monitored by the increase of interfacial tension at the oil/water interface caused by the decrease of surface-active DPPC molecules due to the reaction. The characteristic phases, namely, lag, burst, and equilibrium, are observed. The relationship between the duration of the lag phase (the rate-limiting step of the reaction) and the concentration of calcium ion (an essential cofactor of the reaction) is also investigated. Increase of calcium ion concentration in the subphase is found to shorten the duration of the lag phase. In addition, the real-time measurement simplifies the estimation process for the reaction activation energy.

Triacylglycerols based on 2-(N-tert-butoxycarbonylamino)oleic acid are potent inhibitors of pancreatic lipase

A novel class of potent human pancreatic lipase (HPL) inhibitors was developed. Triacylglycerol analogues containing 2-(N-tert-butoxycarbonylamino) fatty acids were synthesized, and their ability to form stable films at the air/water interface was studied. The inhibition of human digestive lipases by the compounds synthesized was studied by the monolayer technique, and the triesters of glycerol and 2-methylglycerol with 2-(N-tert-butoxycarbonylamino)oleic acid were found to be potent inhibitors of HPL.

Inhibition of lipases by epsilon-polylysine

Oral administration of epsilon-polylysine to rats reduced the peak plasma triacylglycerol concentration. In vitro, epsilon-polylysine and polylysine strongly inhibited the hydrolysis, by either pancreatic lipase or carboxylester lipase, of trioleoylglycerol (TO) emulsified with phosphatidylcholine (PC) and taurocholate. The epsilon-polylysine concentration required for complete inhibition of pancreatic lipase, 10 microg/ml, is 1,000 times lower than that of BSA required for the same effect. Inhibition requires the presence of bile salt and, unlike inhibition of lipase by other proteins, is not reversed by supramicellar concentrations of bile salt. Inhibition increases with the degree of polylysine polymerization, is independent of lipase concentration, is independent of pH between 5.0 and 9.5, and is accompanied by an inhibition of lipase binding to TO-PC emulsion particles. However, epsilon-polylysine did not inhibit the hydrolysis by pancreatic lipase of TO emulsions prepared using anionic surfactants, TO hydrolysis catalyzed by lingual lipase, or the hydrolysis of a water-soluble substrate. In the presence of taurocholate, epsilon-polylysine becomes surface active and adsorbs to TO-PC monomolecular films. These results are consistent with epsilon-polylysine and taurocholate forming a surface-active complex that binds to emulsion particles, thereby retarding lipase adsorption and triacylglycerol hydrolysis both in vivo and in vitro.

Surface fluorescence resonance energy transfer studies on interfacial adsorption of Thermomyces (humicola) lanuginosa lipase, using monomolecular films of cis-parinaric acid

The fluorescence resonance energy transfer (FRET) technique was adapted to study the process whereby lipase is adsorbed to monomolecular lipid films spread at the air-water interface. When cis-parinaric acid (cis-PnA) was spread over an aqueous subphase before the injection of sodium taurodeoxycholate (NaTDC) and Thermomyces lanuginosa lipase (TLL), no FRET was observed. Under these conditions, no adsorption of TLL was detected using an ELISA. In contrast, FRET occurred when cis-PnA was spread over an aqueous subphase containing NaTDC and TLL. The FRET signals observed were attributed to the interactions between the adsorbed TLL and the cis-PnA monomolecular films. Comparisons between the fluorescence emission spectra corresponding to the bulk phase and the aspirated film, in the presence and absence of TLL, showed that cis-PnA was undetectable in the bulk phase. We concluded that the FRET originated from the interface and not from the bulk phase. Using surface FRET, we estimated that the surface excess of the catalytically inactive mutant, TLL(S146A), was 1.6 higher than that present in the wild-type TLL. This finding is in agreement with independent measurements of the surface excess of TLL and TLL(S146A) on monomolecular films of cis-PnA.

Human apolipoprotein H may have various orientations when attached to lipid layer

Apolipoprotein H (ApoH), also known as beta(2)-glycoprotein I, is a plasma glycoprotein with its in vivo physiological and pathogenic roles being closely related to its interaction with negatively charged membranes. Although the three-dimensional crystal structure of ApoH has been recently solved, direct evidence about the spatial state of ApoH on the membrane is still lacking. In this work, the interactions of ApoH with the lipid layer are studied by a combination of lipid monolayer approach and surface concentration determination. The spatial state of the orientation of ApoH on the lipid layer is investigated by analyzing the process of membrane-attached ApoH molecules being extruded out from the phospholipid monolayer by compression. The results show that on neutral lipid layer ApoH has an upright orientation, which is not sensitive to the phase state of the lipid layer. However, on acidic lipid layer, ApoH may have two forms of orientation. One is an upright orientation in the liquid phase region, and the other is flat orientation on the condensed domain region. The variation of the spatial state of ApoH on the lipid layer may relate to a variety of its physiological functions.

Phosphatidylinositol 3-phosphate induces the membrane penetration of the FYVE domains of Vps27p and Hrs

The FYVE domain mediates the recruitment of proteins involved in membrane trafficking and cell signaling to phosphatidylinositol 3-phosphate (PtdIns(3)P)-containing membranes. To elucidate the mechanism by which the FYVE domain interacts with PtdIns(3)P-containing membranes, we measured the membrane binding of the FYVE domains of yeast Vps27p and Drosophila hepatocyte growth factor-regulated tyrosine kinase substrate and their mutants by surface plasmon resonance and monolayer penetration analyses. These measurements as well as electrostatic potential calculation show that PtdIns(3)P specifically induces the membrane penetration of the FYVE domains and increases their membrane residence time by decreasing the positive charge surrounding the hydrophobic tip of the domain and causing local conformational changes. Mutations of hydrophobic residues located close to the PtdIns(3)P-binding pocket or an Arg residue directly involved in PtdIns(3)P binding abrogated the penetration of the FYVE domains into the monolayer, the packing density of which is comparable with that of biological membranes and large unilamellar vesicles. Based on these results, we propose a mechanism of the membrane binding of the FYVE domain in which the domain first binds to the PtdIns(3)P-containing membrane by specific PtdIns(3)P binding and nonspecific electrostatic interactions, which is then followed by the PtdIns(3)P-induced partial membrane penetration of the domain.

Conformational changes and orientation of Humicola lanuginosa lipase on a solid hydrophobic surface: an in situ interface Fourier transform infrared-attenuated total reflection study

This study was done to better understand how lipases are activated at an interface. We investigated the conformational and solvation changes occurring during the adsorption of Humicola lanuginosa lipase (HLL) onto a hydrophobic surface using Fourier transform infrared-attenuated total reflection spectroscopy. The hydrophobic surfaces were obtained by coating silicon attenuated total reflection crystal with octadecyltrichlorosilane. Analysis of vibrational spectra was used to compare the conformation of HLL adsorbed at the aqueous-solid interface with its conformation in solution. X-ray crystallography has shown that HLL exists in two conformations, the closed and open forms. The conformational changes in HLL caused by adsorption onto the surface were compared with those occurring in three reference proteins, bovine serum albumin, lysozyme, and alpha-chymotrypsin. Adsorbed protein layers were prepared using proteins solutions of 0.005 to 0.5 mg/mL. The adsorptions of bovine serum albumin, lysozyme, and alpha-chymotrypsin to the hydrophobic support were accompanied by large unfoldings of ordered structures. In contrast, HLL underwent no secondary structure changes at first stage of adsorption, but there was a slight folding of beta-structures as the lipase monolayer became complete. Solvation studies using deuterated buffer showed an unusual hydrogen/deuterium exchange of the peptide CONH groups of the adsorbed HLL molecules. This exchange is consistent with the lipase being in the native open conformation at the water/hydrophobic interface.

Lipid lateral organization in fluid interfaces controls the rate of colipase association

Colipase, a cofactor of pancreatic triacylglycerol lipase, binds to surfaces of lipolysis reactants, like fatty acid and diacylglycerol, but not to the nonsubstrate phosphatidylcholine. The initial rate of colipase binding to fluid, single-phase lipid monolayers was used to characterize the interfacial requirements for its adsorption. Colipase adsorption rates to phosphatidylcholine/reactant mixed monolayers depended strongly on lipid composition and packing. Paradoxically, reactants lowered colipase adsorption rates only if phosphatidylcholine was present. This suggests that interactions between phosphatidylcholine and reactants create dynamic complexes that impede colipase adsorption. Complex formation was independently verified by physical measurements. Colipase binding rate depends nonlinearly on the two-dimensional concentration of phosphatidylcholine. This suggests that binding is initiated by a cluster of nonexcluded surface sites smaller than the area occupied by a bound colipase. Binding rates are mathematically consistent with this mechanism. Moreover, for each phosphatidylcholine-reactant pair, the complex area obtained from the analysis of binding rates agrees well with the independently measured collapse area of the complex. The dynamic complexes between phosphatidylcholine and lipids, like diacylglycerols, exist independently of the presence of colipase. Thus, our results suggest that lipid complexes may regulate the fluxes of other proteins to membranes during, for example, lipid-mediated signaling events in cells.

Covalent inhibition of digestive lipases by chiral phosphonates

Designing and synthesizing specific inhibitors is of fundamental value for understanding the molecular mechanisms involved in the interfacial adsorption step as well as the catalytic activity of lipases. In this Account, we will review and discuss results obtained mostly at our laboratory concerning the covalent inhibition of human gastric and human pancreatic lipases by chiral phosphonates. Rather than presenting an exhaustive list of compounds tested so far with lipases of animal and microbial origin, we selected recent experimental data illustrating well the specific problems encountered during the covalent inhibition of these digestive lipases.

Importance of arginines 63 and 423 in modulating the bile salt-dependent and bile salt-independent hydrolytic activities of rat carboxyl ester lipase

Previous studies using chemical modification approach have shown the importance of arginine residues in bile salt activation of carboxyl ester lipase (CEL) activity. However, the x-ray crystal structure of CEL failed to show the involvement of arginine residues in CEL-bile salt interaction. The current study used a site-specific mutagenesis approach to determine the role of arginine residues 63 and 423 in bile salt-dependent and bile salt-independent hydrolytic activities of rat CEL. Mutations of Arg(63) to Ala(63) (R63A) and Arg(423) to Gly(423) (R423G) resulted in enzymes with increased bile salt-independent hydrolytic activity against lysophosphatidylcholine, having 6.5- and 2-fold higher k(cat) values, respectively, in comparison to wild type CEL. In contrast, the R63A and R423A mutant enzymes displayed 5- and 11-fold decreases in k(cat), in comparison with wild type CEL, for bile salt-dependent cholesteryl ester hydrolysis. Although taurocholate induced similar changes in circular dichroism spectra for wild type, R63A, and R423G proteins, this bile salt was less efficient in protecting the mutant enzymes against thermal inactivation in comparison with control CEL. Lipid binding studies revealed less R63A and R423G mutant CEL were bound to 1,2-diolein monolayer at saturation compared with wild type CEL. These results, along with computer modeling of the CEL protein, indicated that Arg(63) and Arg(423) are not involved directly with monomeric bile salt binding. However, these residues participate in micellar bile salt modulation of CEL enzymatic activity through intramolecular hydrogen bonding with the C-terminal domain. These residues are also important, probably through similar intramolecular hydrogen bond formation, in stabilizing the enzyme in solution and at the lipid-water interface.

Lipid monolayers: why use half a membrane to characterize protein-membrane interactions?

Variants of membrane-active proteins and peptides are increasingly available through synthesis and molecular engineering. When determining the effects of structural changes upon the interaction of these proteins with lipid membranes, monomolecular films of lipids at the air-water interface have significant advantages over bilayers and other lipid dispersions. In the past year, a variety of protein-lipid interactions has been characterized successfully using relatively simple surface measurements.