Redox polymerization

Nanogels Based on N,N-Dimethylacrylamide and β-Cyclodextrin Triacrylate for Enhanced Solubility and Therapeutic Efficacy of Aripiprazole

Aripiprazole (ARZ) is a medication used for the treatment of various diseases such as schizophrenia, bipolar disorder, major depressive disorder, autism, and Tourette's syndrome. Despite its therapeutic benefits, ARZ is characterized by a poor water solubility which provoked the development of various delivery systems in order to enhance its solubility. In the present work, a nanoscale drug delivery system based on N,N-dimethylacrylamide (DMAA) and β-cyclodextrin triacrylate (β-CD-Ac3) as potential aripiprazole delivery vehicles was developed. The nanogels were synthesized by free radical polymerization of DMAA in the presence of β-CD-Ac3 as a crosslinking agent and then loaded with ARZ via host-guest inclusion complexation. The blank- and drug-loaded nanogels were evaluated using different methods. Fourier transform infrared (FTIR) spectroscopy was employed to confirm the incorporation of β-CD moieties into the polymer network. Dynamic light scattering (DLS) was used to study the size of the developed systems. The samples exhibited a monomodal particle size distribution and a relatively narrow dispersity index. The hydrodynamic diameter (Dh) of the gels varied between 107 and 129 nm, with a tendency for slightly larger particles as the β-CD-Ac3 fraction increased. Loading the drug into the nanocarrier resulted in slightly larger particles than the blank gels, but their size was still in the nanoscopic range (166 to 169 nm). The release profiles in PBS were studied and a sustained release pattern with no significant burst effect was observed. A cytotoxicity assessment was also conducted to demonstrate the non-toxicity and biocompatibility of the studied polymers.

Ultrastretchable and highly conductive hydrogels based on Fe3+- lignin nanoparticles for subzero wearable strain sensor

Conductive hydrogels have attracted considerable interest for potential applications in soft robotics, electronic skin and human monitoring. However, insufficient mechanical characteristics, low adhesion and unsatisfactory electrical conductivity severely restrict future application possibilities of hydrogels. Herein, lignin nanoparticles (LNPs)-Fe3+-ammonium persulfate (APS) catalytic system was introduced to assemble Poly(2-hydroxyethyl methacrylate)/LNPs/Ca2+ (PHEMA/LNPs/Ca) hydrogels. Due to the abundant metal coordination and hydrogen bonds, the composite hydrogel displayed ultrahigh stretchable capacity (3769 %), adhesion properties (248 kPa for skin) and self-healing performance. Importantly, hydrogel sensors possess with high durability, strain sensitivity (GF = 8.75), fast response time and freeze resistance (-20 °C) that could be employed to monitor motion signals in low-temperature regime. Therefore, the LNPs-Fe3+ catalytic system has great potential in preparing hydrogel for various applications such as human-computer interaction, artificial intelligence, personal healthcare and subzero wearable devices. At the same time, incorporation of natural macromolecules into polymer hydrogels is tremendous research significance for investigating high-value utilization of lignin.

Facile Preparation of a Multifunctional Hydrogel Composite Dressing via Dual Self-Redox Mechanism for Accelerated Infected Wound Healing

The management of infected wound healing remains a formidable challenge primarily due to the absence of an ideal wound dressing that can not only effectively inhibit persistent bacterial infection and mitigate excessive inflammation but also possess appropriate mechanical strength, moderate adhesiveness, and favorable self-healability to maintain its protective function and facilitate easy change. In this study, we present an effective strategy for the preparation of a novel composite hydrogel under mild conditions, without the need for additives. This is achieved by incorporating resveratrol (RSV)-loaded alkali lignin nanoparticles (ARNPs) into an advanced polyacrylamide-based hydrogel matrix. The utilization of ARNPs facilitated the sustained release of RSV, thereby enhancing its bioavailability. The polymerization of acrylamide was gently triggered by free radicals generated through a novel dual self-redox mechanism involving silver ions (Ag+), catechols, and ammonium persulfate in neutral and at room temperature, without the requirement of cross-linkers. The dual self-redox reactions played a dominant role in facilitating the gelation process and imparting the desired properties to the resulting hydrogels. The obtained product exhibited exceptional antibacterial properties, favorable anti-inflammatory activity, superior tensile strength, moderate adhesiveness, and reliable self-healability, thereby accelerating the closure of infected wounds. Collectively, this study synergistically integrated RSV-sustained release nanoparticles and a specially designed multifunctional hydrogel into a single system in a conveniently manipulable manner. This composite wound dressing material holds promise for promoting the healing of infected wounds and has potential applications in other complex wound treatments.

Synthesis of Polymers with Narrow Molecular Mass Distribution through Interface-Initiated Room-Temperature Polymerization in Emulsion Gels

Homopolymers of n-butyl acrylate, methyl methacrylate, styrene, and their random copolymers were prepared via interface-initiated polymerization of emulsion gels at 20 °C. The polymerization was conducted in a free radical polymerization manner without inert gas protection. Compared with the polymers synthesized at 60 °C, the polymerization of emulsion gels at 20 °C produced homo- and copolymers with a higher molecular mass and a narrower molecular mass distribution. The polydispersity indices for the polymers synthesized at 20 °C were found to be between 1.12 and 1.37. The glass transition temperatures for the as-synthesized butyl acrylate copolymers agree well with the prediction from the Gordon-Taylor equation. Interface-initiated room-temperature polymerization is a robust, energy-saving polymerization technique for synthesizing polymers with a narrow molecular mass distribution.

Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

Frontal polymerization of epoxy-based thermosets is a promising curing technique for the production of carbon fiber reinforced composites (CFRCs). It exploits the exothermicity of polymerization reactions to convert liquid monomers to a solid 3D network. A self-sustaining curing reaction is triggered by heat or UV-radiation, resulting in a localized thermal reaction zone that propagates through the resin formulation. To date, frontal polymerization is limited to CFRCs with a low fiber volume percent as heat losses compromise on the propagation of the heat front, which is crucial for this autocatalytic curing mechanism. In addition, the choice of suitable epoxy monomers and thermal radical initiators is limited, as highly reactive cycloaliphatic epoxies as well as peroxides decarboxylate during radical induced cationic frontal polymerization. The resulting networks suffer from high defect rates and inferior mechanical properties. Herein, we overcome these shortcomings by introducing redox cationic frontal polymerization (RCFP) as a new frontal curing concept. In the first part of this study, the influence of stannous octoate (reducing agent) was studied on a frontally cured bisphenol A diglycidyl ether resin and mechanical and thermal properties were compared to a conventional anhydride cured counterpart. In a subsequent step, a quasi-isotropic CFRC with a fiber volume of >50 vol%, was successfully cured via RCFP. The composite exhibited a glass transition temperature > 100 °C and a low number of defects. Finally, it was demonstrated that the redox agent effectively prevents decarboxylation during frontal polymerization of a cycloaliphatic epoxy, demonstrating the versatility of RCFP in future applications.

Highly stretchable, self-healable and adhesive, thermal responsive conductive hydrogel loading nanocellulose complex for a flexible sensor

Currently, with the widespread concerns of smart soft sensors in wearable electronics, human health detection and electronic skin, flexible conductive hydrogels have been extensively studied. However, it remains a great challenge to develop hydrogels that have both satisfactory mechanical performance with stretchable and compressible and high conductive. Herein, based on synergistic dynamic hydrogen and metal coordination bonds, polyvinyl alcohol (PVA)/poly (2-hydroxyethyl methacrylate) (PHEMA) hydrogels doped with polypyrrole decorated cellulose nanofibers (CNFs@PPy) are developed via free radical polymerization. The loading versatile CNFs@PPy highlighted the complex hydrogels super-stretchability (approximately 2600 % elongation) and excellent toughness (2.74 MJ/m3) properties to tensile deformation, strong compressive strength (1.96 MPa), fast temperature responsiveness and outstanding strain sensing capability (GF = 3.13). Moreover, the PHEMA/PVA/CNFs@PPy hydrogels possessed rapid self-healing and powerful adhesive abilities to various interfaces without extra assistance, as well as distinguished fatigue resistance performance. Such advantages make the nanocomposite hydrogel displayed high stability and repeatable to both pressure and strain in a wide range of deformations, enabling a promising candidate in the fields of motion monitoring and healthcare management.

Photochemically induced formation of adhesive hydrogels from sodium alginate, acrylamide, and iron sandwich complexes

Visible light irradiation of an aqueous solution of sodium alginate and organometallic complex [(C5H5)Fe(toluene)]BF4 transforms it into a rigid hydrogel due to crosslinking of the carboxylate groups by the iron ions. Irradiation of the same iron complex together with K2S2O8 initiates the polymerization of acrylamide, which provides an efficient method for light-controlled one-step preparation of alginate-polyacrylamide double network hydrogels, which are capable of gluing wet glass with 100-200 kPa shear strength.

A mononuclear cobalt(III) carboxylate complex with a fully O-based coordination sphere: CoIII-O bond homolysis and controlled radical polymerisation from [Co(acac)2(O2CPh)]

The addition of benzoyl peroxide to [Co^II(acac)₂] in a 1 : 2 ratio selectively produces [Co^III(acac)₂(O₂CPh)], a diamagnetic (NMR) mononuclear Co^III complex with an octahedral (X-ray diffraction) coordination geometry. It is the first reported mononuclear Co^III derivative with a chelated monocarboxylate ligand and an entirely O-based coordination sphere. The compound degrades in solution quite slowly by homolytic Co^III-O₂CPh bond cleavage upon warming above 40 °C to produce benzoate radicals and can serve as a unimolecular thermal initiator for the well-controlled radical polymerisation of vinyl acetate. Addition of ligands (L = py, NEt₃) induces benzoate chelate ring opening and formation of both cis and trans isomers of [Co^III(acac)₂(O₂CPh)(L)] for L = py under kinetic control, then converting quantitatively to the cis isomer, whereas the reaction is less selective and equilibrated for L = NEt₃. The py addition strengthens the Co^III-O₂CPh bond and lowers the initiator efficiency in radical polymerisation, whereas the NEt₃ addition results in benzoate radical quenching by a redox process. In addition to clarifying the mechanism of the radical polymerisation redox initiation by peroxides and rationalizing the quite low efficiency factor for the previously reported [Co^II(acac)₂]/peroxide-initiated organometallic-mediated radical polymerisation (OMRP) of vinyl acetate, this investigation provides relevant information on the Co^III-O homolytic bond cleavage process.

Synthesis of a Room-Temperature Curable Acrylic-Urethane Polymer Binder for Road Markings with High Transmittance

Triol acrylic-urethane (t-AU) was synthesized from an addition reaction using trimethylolpropane, hexamethylene diisocyanate, and 2-hydroxyethyl methacrylate. The novel acrylic-urethane polymer was applied to a high-performance binder to prepare a reliable road marking paint. Acrylic-urethane polymer binder formulations were designed to optimize the effect of t-AU on the physical properties. The t-AU content in the formulation affected the adhesion and optical properties. The improvement in the adhesive performance and transparency ability for road markings was attributed to the optimal chemical structure or design of the acrylic-urethane polymer. The synthesis of t-AU was confirmed by Fourier transform infrared spectroscopy, and molecular weight and polydispersity index (PDI; PDI = M_w/M_n) measurements. The tensile and shear strength, hardness, gel fraction, crosslink density, contact angle, and transmittance of the acrylic-urethane polymer binder (AUP) were evaluated by curing at room temperature using a redox initiator system. An optimized AUP by adding 5 wt.% t-AU provides a viable alternative to high-performance binders in road marking paints.

Low Temperature, In Situ Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels

Vinyl acetate (VAc) was polymerized to about 90% conversion in 9 h at 40°C from the colloidal microstructure of the VAc/fumed silica/cetyltrimethylammonium bromide (CTAB) system. The glass transition ( $T_g$ ) of poly(vinyl acetate) (PVAc) polymerized in these emulsion gels with silica was higher ( $T_g={41}^{°}\text{C}$ ) than those of PVAc made from bulk polymerization at 60°C ( $T_g={31}^{°}\text{C}$ ) and the weight average molar mass ( $M_w$ ) was also larger ( $M_w$ about 300 kg/mol) than those from bulk polymerization ( $M_w=125\text{kg}/\text{mol}$ ). Increased $M_w$ , $T_g$ , and lowered processing temperature for these composites could facilitate new applications for PVAc.

Thiophenium Salts as New Oxidant for Redox Polymerization under Mild- and Low-Toxicity Conditions

In mild conditions (under air, room temperature, no monomer purification and without any energy activation), redox free radical polymerization (RFRP) is considered as one of the most effective methods to polymerize (meth)acrylate monomers. In the past several years, there has been a growing interest in research on the development of new redox initiating systems (RISs), thanks mainly to the evolution of toxicity labeling and the stability issue of the current RIS based on peroxide and aromatic amine. In this study, a new, low-toxicity RIS based on thiophenium salt as the oxidant species is presented with various reductive species. The reactivity and the stability of the proposed RISs are investigated and the synthesis of new thiophenium salts reported.

Exploring maleimide-anchored halloysites as nanophotoinitiators for surface-initiated photografting strategies

Maleimide-functionalized HNTs (HNTs-I) were prepared and explored as a nanophotoinitiator. Vinyl monomers can be grafted onto the nanotubes following a spatially controllable, metal-free and non-contact photoinitiated approach. The obtained HNTs-I were further used in a 3D printing system to fabricate hydrogels with designed configurations.

Hydrogels as functional components in artificial cell systems

Recent years have seen substantial efforts aimed at constructing artificial cells from various molecular components with the aim of mimicking the processes, behaviours and architectures found in biological systems. Artificial cell development ultimately aims to produce model constructs that progress our understanding of biology, as well as forming the basis for functional bio-inspired devices that can be used in fields such as therapeutic delivery, biosensing, cell therapy and bioremediation. Typically, artificial cells rely on a bilayer membrane chassis and have fluid aqueous interiors to mimic biological cells. However, a desire to more accurately replicate the gel-like properties of intracellular and extracellular biological environments has driven increasing efforts to build cell mimics based on hydrogels. This has enabled researchers to exploit some of the unique functional properties of hydrogels that have seen them deployed in fields such as tissue engineering, biomaterials and drug delivery. In this Review, we explore how hydrogels can be leveraged in the context of artificial cell development. We also discuss how hydrogels can potentially be incorporated within the next generation of artificial cells to engineer improved biological mimics and functional microsystems.

Influence of redox initiator component ratios on the emulsion copolymerisation of vinyl acetate and neodecanoic acid vinyl ester

Redox initiated emulsion polymerisation of vinyl acetate and neodecanoic acid vinyl ester was investigated at temperatures ranging from -1 °C to 87 °C (initiation temperature between -1 °C and 60 °C), using varying molar ratios of the following redox components: l-ascorbic acid, tert-butyl hydroperoxide and ammonium iron(iii) sulfate dodecahydrate as a catalyst. The high flexibility of redox initiators enables product properties, as well as space-time-yield, to be adjusted as required. Polymers being products by process, it was presumed that modifying the conversion rate would lead to a different product. However, it was shown that the reaction rate is adjustable by varying the catalyst amount without changing the product properties, such as molecular weight, particle size, glass transition temperature and polymer structure, while reducing the overall process time by 40-86% (at equimolar ratios of reducing and oxidising agent). In contrast, variation of the tert-butyl hydroperoxide content resulted in changes of the molecular weight. The influence of the initiation temperature and of the redox system on the reaction rate was determined, enabling control over the reaction rate in the whole temperature range. Meanwhile, overall process times of approximately 2-240 min and high conversions of 90-99% could be achieved. Statistical modelling confirmed the results and facilitated predictions, enabling the conversion rate to be adjusted to the desired properties. The possibility of being able to adjust the conversion rate and product properties independently of each other creates additional degrees of freedom in process design.

Marrying the incompatible for better: Incorporation of hydrophobic payloads in superhydrophilic hydrogels

HYPOTHESIS

The entrapment of lyophobic in superhydrophilic hydrogels is challenging because of the intrinsic incompatibility between hydrophobic and hydrophilic molecules. To achieve such entrapment without affecting the hydrogel's formation, the electrospinning of nanodroplets or nanoparticles with a water-soluble polymer could reduce the incompatibility through the reduction of interfacial tension and the formation of a barrier film preventing coalescence or aggregation.

EXPERIMENTS

Nanodroplets or nanoparticles dispersion are electrospun in the presence of a hydrophilic polymer in hydrogel precursors. The dissolution of the hydrophilic nanofibers during electrospinning allows a redispersion of emulsion droplets and nanoparticles in the hydrogel's matrix.

FINDINGS

Superhydrophilic hydrogels with well-distributed hydrophobic nanodroplets or nanoparticles are obtained without detrimentally imparting the viscosity of hydrogel's precursors and the mechanical properties of the hydrogels. Compared with the incorporation of droplets without electrospinning, higher loadings of hydrophobic payload are achieved without premature leakage. This concept can be used to entrap hydrophobic agrochemicals, drugs, or antibacterial agents in simple hydrogels formulation.

Ultrafast gelation of multifunctional hydrogel/composite based on self-catalytic Fe3+/Tannic acid-cellulose nanofibers

Multifunctional hydrogels with transparency, ultraviolet (UV)-blocking, stretchable, self-healing, adhesive, antioxidant and antibacterial properties are promising materials for biomedical and relevant applications. However, preparation of these hydrogels at ambient environment without stimuli is still a challenge. Here, a series of hydrogels possessing ultrashort gelation time (~30 s) at room or cold temperature were fabricated based on self-catalytic Fe³⁺/Tannic acid-cellulose nanofiber (Fe³⁺/TA-CNF). Fe³⁺/TA-CNF formed stable redox pairs to activate ammonium persulfate (initiator), generating abundant free radicals to trigger the ultrafast polymerization of acrylic acid (AA). To improve the antibacterial ability of hydrogel, a bilayer hydrogel composite (NF@HG) composed of tetracycline hydrochloride (TH)-loaded electrospun nanofibers and hydrogel layer was fabricated via a mild casting method. The NF@HG exhibited enhanced antibacterial ability and the sustained release of TH can provide long-term antibacterial activity. Besides, cell viability results demonstrated that NF@HG was non-cytotoxic. Taken together, this strategy based on self-catalytic Fe³⁺/TA-CNF system may inspire new aspects on fast and economical preparation of multifunctional hydrogels or composites, which have attractive industrial applications for biomedical materials.

Polymer-functionalization of carbon nanotube by in situ conventional and controlled radical polymerizations

Functionalization of carbon nanotube (CNT) with polymers has drawn much attention due to its wide range of applications. Polymer-functionalized CNT could exhibit variety of properties, such as responsivity to environmental stimuli, ability of complexation with metal ions, increased dispersibility in different solvents, higher compatibility with polymer matrix, etc. Chemical and physical methods have been developed for the preparation of polymer-functionalized CNT. Polymer chains are chemically bonded to the CNT edge or surface in the chemical methods, which results in highly stable CNT/polymer composites. "Grafting to", "grafting from", and "grafting through" methods are the most common chemical methods for polymer-functionalization of CNT. In "grafting to" method, pre-fabricated polymer chains are coupled with the either functionalized or non-functionalized CNT. In "grafting from" and "grafting through" methods, CNT is functionalized by polymers simultaneously synthesized by in situ polymerization methods. Conventional free radical polymerization (FRP) and also controlled radical polymerization (CRP) are the most promising methods for in situ tethering of polymer brushes onto the surface of CNT due to their control over the grafting density, thickness, and functionality of the polymer brushes. The main focus of this review is on the synthesis of polymer-functionalized CNT via both the "grafting from" and "grafting through" methods on the basis of FRP and CRP routs, which is commonly known as in situ polymerizations. Finally, the most important challenges and applications of the in situ polymer grafting methods are discussed, which could be interesting for the future works.

Mixed-Matrix Membrane Fabrication for Water Treatment

In recent years, technology for the fabrication of mixed-matrix membranes has received significant research interest due to the widespread use of mixed-matrix membranes (MMMs) for various separation processes, as well as biomedical applications. MMMs possess a wide range of properties, including selectivity, good permeability of desired liquid or gas, antifouling behavior, and desired mechanical strength, which makes them preferable for research nowadays. However, these properties of MMMs are due to their tailored and designed structure, which is possible due to a fabrication process with controlled fabrication parameters and a choice of appropriate materials, such as a polymer matrix with dispersed nanoparticulates based on a typical application. Therefore, several conventional fabrication methods such as a phase-inversion process, interfacial polymerization, co-casting, coating, electrospinning, etc., have been implemented for MMM preparation, and there is a drive for continuous modification of advanced, easy, and economic MMM fabrication technology for industrial-, small-, and bulk-scale production. This review focuses on different MMM fabrication processes and the importance of various parameter controls and membrane efficiency, as well as tackling membrane fouling with the use of nanomaterials in MMMs. Finally, future challenges and outlooks are highlighted.

Switching from Single to Simultaneous Free-Radical and Anionic Polymerization with Enamine-Based Organic Electron Donors

Although most monomers can polymerize through different propagation pathways, polymerization-initiating systems that can switch from one mode to another are rare. In this study, we demonstrate that enamine-based organic electron donors (OEDs) constitute the first systems able to initiate either free-radical or anionic polymerization under simple, mild, and safe conditions. While direct electron-transfer reduction of monomers by OEDs results in the initiation of anionic chain-growth polymerization, introduction of a competing oxidant with a higher reduction potential than the monomer switches the former anionic propagation to a clean radical-propagation process. The benefit of this dual-mode activator is highlighted in the synthesis of an interpenetrating polymer network through simultaneous initiation of radical and anionic propagation processes.

Modified POSS nano-structures as novel co-initiator-crosslinker: Synthesis and characterization

OBJECTIVE

To synthesize an amine-modified polyhedral oligomeric silsesquioxane (POSS) nano-structure as a novel co-initiator-crosslinker (co-Ini-Linker) and to determine the effect of the co-Ini-linker on the physical and mechanical behavior of an experimental dental composite.

METHODS

The amine-methacrylate POSS nano-structures (AMA-POSS) were chemically synthesized by anchoring a tertiary amine functionality on the methacrylate POSS (MA-POSS) branches. Three types of AMA-POSS, having different amine branches in their structures, were synthesized through the Aza Michael reaction. The chemical structure of AMA-POSSs were evaluated by¹H-NMR spectroscopy. Afterward, the AMA-POSS was incorporated into a dental resin system composed of Bis-GMA, TEGDMA, and photo-initiator. Three resin systems with different AMA-POSS types were then prepared, and their properties were compared with a resin containing DMAEMA as a conventional co-initiator. The degree of conversion evaluated by FTIR spectroscopy and the shrinkage kinetics of the resins were determined through the bonded-disk technique. The flexural properties of the photopolymerized resins were also investigated. The distribution of nano-structures in the matrix resin was analyzed using EDX analysis.

RESULTS

The modified POSS structure and the number of amine branches were confirmed with¹H-NMR spectroscopy. The resin containing 8 amine branches (P8) showed the same degree of conversion (DC%) as the resin containing DMAEMA (P > 0.05). Decreasing the amine branches in the POSS structure, however, revealed an increasing trend in DC%. The resin containing P8 showed the lowest shrinkage strain. By incorporating AMA-POSS into the resin system, the water sorption significantly decreased (P < 0.05). The flexural strength and modulus increased by adding P3 into the resin system (P < 0.05). EDX Si-map revealed that the co-Ini-linker was well dispersed in the resin matrix.

SIGNIFICANCE

The synthesized novel amine-methacrylate POSS nanostructures not only act as an amine co-initiator but also work as a reinforcing filler and a cross-linking agent.

Silk Hydrogels with Controllable Formation of Dityrosine, 3,4-Dihydroxyphenylalanine, and 3,4-Dihydroxyphenylalanine-Fe3+ Complexes through Chitosan Particle-Assisted Fenton Reactions

The oxidation of tyrosine residues of silk fibroin involves the generation of dityrosine and 3,4-dihydroxyphenylalanine (DOPA). However, it remains a challenge to selectively control the reaction pathway to produce dityrosine or DOPA in a selective fashion. Here, silk hydrogels with controllable formation of not only dityrosine and DOPA but also DOPA-Fe3+ complexes within the cross-linked networks were developed. The use of chitosan particles in the Fenton reaction allowed the interaction of Fe3+ ions with silk fibroin to be limited through the adsorption of Fe3+ ions onto chitosan particles by manipulating contact time between the reaction medium and chitosan particles. This led to significant suppression of the premature formation of β-sheet structures that cause steric hindrance to the collisions between tyrosyl radicals and thus enabled higher selectivity toward the formation of dityrosine than DOPA. Remarkably, the addition of ethylenediaminetetraacetic acid (EDTA) to the chitosan particle-assisted Fenton reactions resulted in hydrogels that significantly favored the formation of DOPA over dityrosine due to the increase in the hydroxylation of phenol in the presence of EDTA. Despite the existence of Fe3+-EDTA complexes, Raman spectra indicated the DOPA-Fe3+ complexation in the hydrogels. Mechanistically, the hydrogel networks with small-sized and uniformly distributed β-sheet structures as well as the abundance of DOPA appear to make non-EDTA-chelated Fe3+ ions more accessible to complexation with DOPA. These findings have important implications for understanding the oxidation of tyrosine residues of silk fibroin by metal-catalyzed oxidation systems with potential benefits for future studies on silk protein-based hydrogels capable of generating intrinsic adhesive features as well as for exploring dual-cross-linked silk hydrogels constructed by chemical cross-linking and metal-coordinate complexation.

New Pure Organic and Peroxide-Free Redox Initiating Systems for Polymerization in Mild Conditions

Redox initiating systems (RISs) are highly worthwhile for polymerization in mild conditions (at room temperature—RT) without external thermal or light activation. With high performance redox initiating systems RIS, the free radical polymerization FRP can even be carried out under air and without inhibitors/stabilizers removal from the monomers/resins. However, efficient RISs are still based on peroxides or metal complexes. In this work, a pure organic and peroxide-free RIS is presented based on the interaction of a well-selected triarylamine derivative (T4epa) with iodonium salt used as reducing and oxidizing agents, respectively. The redox polymerization (Redox FRP) was followed through pyrometry and thermal imaging experiments. Remarkably, a full control of the work time as well as a high reactivity is observed for mild conditions.

Experimental validation of eosin-mediated photo-redox polymerization mechanism and implications for signal amplification applications

When eosin-mediated, photo-redox polymerization is used to amplify signals in biosensing, oxygen has dual, opposing roles.

Redox initiation in semicontinuous polymerization to search for specific mechanical properties of copolymers

In this work, for a semicontinuous emulsion polymerization reaction, it is shown that using a redox initiation system at 40°C, substantial modifications in copolymer chain composition with conversion can be easily obtained. To test controllable trajectories for comonomer feeding, linear and parabolic profiles were chosen to get different types of chain composition variations for the 50/50 w/w styrene/n-butyl acrylate system. For the “forced composition copolymers,” the molecular weight averages and distribution were obtained by size exclusion chromatography. The composition along conversion was followed by proton nuclear magnetic resonance to determine the weight composition distribution (WCD) of the copolymer chains. Mechanodynamic (dynamic-mechanical analysis), tensile, and hardness tests exhibited consistent results depending on the WCD that outcomes from the respective feeding profile. The results confirm that this methodology is of great potential for industrial applications when looking for synergy in copolymer properties, and low-cost processes.

An Ingestible Self-Polymerizing System for Targeted Sampling of Gut Microbiota and Biomarkers

A proof-of-concept for the fabrication of a self-polymerizing system for sampling of gut microbiome in the upper gastrointestinal (GI) tract is presented. An orally ingestible microdevice is loaded with the self-polymerizing reaction mixture to entrap gut microbiota and biomarkers. This polymerization reaction is activated in the aqueous environment, like fluids in the intestinal lumen, and causes site-specific microsampling in the gastrointestinal tract. The sampled microbiota and protein biomarkers can be isolated and analyzed via high-throughput multiomic analyses. The study utilizes a hollow microdevice (Su-8, ca. 250 μm), loaded with an on-board reaction mixture (iron chloride, ascorbic acid, and poly(ethylene glycol) diacrylate monomers) for diacrylate polymerization in the gut of an animal model. An enteric-coated rat capsule was used to orally gavage these microdevices in a rat model, thereby, protecting the microdevices in the stomach (pH 2), but releasing them in the intestine (pH 6.6). Upon capsule disintegration, the microdevices were released in the presence of luminal fluids (in the small intestine region), where iron chloride reacts with ascorbic acid, to initiate poly(ethylene glycol) diacrylate polymerization via a free radical mechanism. Upon retrieval of the microdevices, gut microbiota was found to be entrapped in the polymerized hydrogel matrix, and genomic content was analyzed via 16s rRNA amplicon sequencing. Herein, the results show that the bacterial composition recovered from the microdevices closely resemble the bacterial composition of the gut microenvironment to which the microdevice is exposed. Further, histological assessment showed no signs of local tissue inflammation or toxicity. This study lays a strong foundation for the development of untethered, non-invasive microsampling technologies in the gut and advances our understanding of host-gut microbiome interactions, leading to a better understanding of their commensal behavior and associated GI disease progression in the near future.

Facile One-Pot Synthesis of Hyperbranched Glycopolymers in Aqueous Solution via a Hydroxy/Cu(III) Redox Process

In this study, a self-condensing vinyl copolymerization/redox (SCVP/Redox) system was constructed to prepare hyperbranched poly(methyl-6-O-methacryloyl-α-D-glucoside) by using Cu(III) as the initiator in aqueous solution, in which the –OH group in C-2, C-3 and C-4 position on pyranose rings could be initiated by Cu(III). The branched and linear units were clearly distinguished by nuclear magnetic resonance (¹H NMR) to estimate the degree of branching (DB). When the ratio of Cu(III) to monomer fixed at 0.5:1, the DB value reached 0.32, which was higher than the product initiated by Ce(IV). Moreover, the inhibition activity of the products on amyloid fibrillation was investigated by using the hen egg-white lysozyme (HEWL) as a model based on the difference of the initiation sites. The results showed that the –OH groups in C-4 position might play an important role in this process.

Redox-Initiated Reversible Addition-Fragmentation Chain Transfer (RAFT) Miniemulsion Polymerization of Styrene using PPEGMA-Based Macro-RAFT Agent

Redox-initiated reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerizations are successfully conducted with an employment of trithiocarbonate-based macro-RAFT agents and surfactant. Two macro-RAFT agents-hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA₂₇ ) and amphiphilic poly(poly(ethylene glycol) methyl ether methacrylate)-b-polystyrene (PPEGMA₂₇ -b-PS₃₃ )- are examined for the miniemulsion polymerization of styrene. The use of PPEGMA₂₇ (in the presence of sodium dodecyl sulfate (SDS)) results in a slow polymerization rate with a broad particle size. In the absence of SDS, the use of PPEGMA₂₇ -b-PS₃₃ results in a broad particle size distribution due to its inability to form uniform initial droplets whereas the same amphiphilic block copolymer in the presence of SDS yields resulting products with a uniform particle size distribution. The latter exhibits a fashion of controlled polymerization with a high consumption of monomer (98% in 100 min) and a narrow molecular weight distribution throughout the polymerization. This is attributed to the formation of uniform droplets facilitated by SDS in a miniemulsion. The amphiphilic macro-RAFT agent is able to anchor efficiently on the monomer droplet or particle/water interface and form stabilized particles of well-defined PPEGMA₂₇ -b-PS block copolymer, confirmed using dynamic light scattering and transmission electron micrographs.

Removal of Acid Blue 62 textile dye from aqueous solutions by cerium reagents

The removal of Acid Blue 62 (AB62) dye which is known as a pollutant agent and contains in wastewater of textile industry has been studied in this work by using five various cerium compounds as the oxidizing agents. The parameters involved in the oxidation reaction such as pH, initial dye concentration and the oxidizing agent dosage have been investigated using both batch and semi-batch reactors at ambient temperature. The results indicated that the rate of oxidation for various cerium reagents is in the following order: CeF₄ > (NH₄)₂Ce (NO₃)₆> Ce (SO₄)₂ > CeCl₃ > Ce (CH₃COO)₃, where cerium fluoride (CeF₄) had the highest removal yields, 99.9% and 95%, for dye de-colouration and COD (chemical oxygen demand), respectively. The analysis of the dye removal was done by using UV-VIS spectrometry, GC-MS and HPLC methods which indicated the aromatic ring cleavage of AB62 dye by CeF₄. The half-life measurement was employed to evaluate the reaction rate model for decomposition of AB62 dye by CeF₄.

Radical polymerization reactions for amplified biodetection signals

This review summarizes various radical polymerization chemistries for amplifying biodetection signals and compares them from the practical point of view.

Silane/iodonium salt as redox/thermal/photoinitiating systems in radical and cationic polymerizations for laser write and composites

Methylphenylsilane (MPS) and octadecylsilane (ODS) are originally proposed here combined with iodonium salt as a highly versatile triple initiating system for redox, photo and thermal polymerizations (both radical and cationic).

One-pot synthesis of corolla-shaped gold nanostructures with (110) planes

In this work, corolla-shaped gold nanostructures with (110) planes were successfully synthesized using ethylenediaminetetraacetic acid (EDTA) and polyvinylpyrrolidone (PVP) as the co-reductants and shape-directing agents. The structure and the mechanism of the nanostructures were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical characterization. On the basis that surface energies of different gold crystallographic planes are in the order γ(111) < γ(100) < γ(110), the (110) plane has the highest surface energy among the low-index planes. The gold nanocrystals with exposed high-energy planes are important in facilitating their potential applications such as highly efficient catalysts. This research is of great significance for the subsequent work on the synthesis of nanocrystals dominated by high-energy crystal planes.

The corolla-shaped gold nanostructures with (110) planes were synthesized using ethylenediaminetetraacetic acid and polyvinylpyrrolidone as the co-reductants and shape-directing agents.