Cellular laserfection

A mini-review on gene delivery technique using nanoparticles-mediated photoporation induced by nanosecond pulsed laser

Nanosecond pulsed laser induced photoporation has gained increasing attention from scholars as an effective method for delivering the membrane-impermeable extracellular materials into living cells. Compared with femtosecond laser, nanosecond laser has the advantage of high throughput and low costs. It also has a higher delivery efficiency than continuous wave laser. Here, we provide an extensive overview of current status of nanosecond pulsed laser induced photoporation, covering the photoporation mechanism as well as various factors that impact the delivery efficiency of photoporation. Additionally, we discuss various techniques for achieving photoporation, such as direct photoporation, nanoparticles-mediated photoporation and plasmonic substrates mediated photoporation. Among these techniques, nanoparticles-mediated photoporation is the most promising approach for potential clinical application. Studies have already been reported to safely destruct the vitreous opacities in vivo by nanosecond laser induced vapor nanobubble. Finally, we discuss the potential of nanosecond laser induced phototoporation for future clinical applications, particularly in the areas of skin and ophthalmic pathologies. We hope this review can inspire scientists to further improve nanosecond laser induced photoporation and facilitate its eventual clinical application.

Molecule transfer into mammalian cells by single sub-nanosecond laser pulses

A rapid, precise, and viability-retaining method for cytoplasmic molecule delivery is highly desired for cell engineering. Routine methods suffer from low throughput, lack of selectivity, requirement of helper compounds, predominant endosomal delivery, and/or are restricted to specific molecule classes. Photonic cell manipulation bears the potential to overcome these drawbacks. Here we investigated mammalian cell manipulation by single sub-nanosecond laser pulses. Axial beam waist positioning close to a cell monolayer induced culture vessel damage and zones of cell ablation. Cells at margins of ablation zones exhibited uptake of membrane-impermeant fluorophores and GFP expression plasmids. Increasing Rayleigh-length and beam waist diameter reduced the sensitivity to axial defocusing and resulted in robust molecule transfer. Serial application of single pulses focused over a moving cell monolayer yielded quantitative molecule transfer to cells at rates up to 40%. Our results could be basic to spatially and temporally controlled single laser pulse-mediated marker-free high throughput cell manipulation.

Laser-based molecular delivery and its applications in plant science

Lasers enable modification of living and non-living matter with submicron precision in a contact-free manner which has raised the interest of researchers for decades. Accordingly, laser technologies have drawn interest across disciplines. They have been established as a valuable tool to permeabilize cellular membranes for molecular delivery in a process termed photoinjection. Laser-based molecular delivery was first reported in 1984, when normal kidney cells were successfully transfected with a frequency-multiplied Nd:YAG laser. Due to the rapid development of optical technologies, far more sophisticated laser platforms have become available. In particular, near infrared femtosecond (NIR fs) laser sources enable an increasing progress of laser-based molecular delivery procedures and opened up multiple variations and applications of this technique.This review is intended to provide a plant science audience with the physical principles as well as the application potentials of laser-based molecular delivery. The historical origins and technical development of laser-based molecular delivery are summarized and the principle physical processes involved in these approaches and their implications for practical use are introduced. Successful cases of laser-based molecular delivery in plant science will be reviewed in detail, and the specific hurdles that plant materials pose will be discussed. Finally, we will give an outlook on current limitations and possible future applications of laser-based molecular delivery in the field of plant science.

Lipofection mediated transfection fails for sea urchin coelomocytes

Molecular cloning, gene manipulation, gene expression, protein function, and gene regulation all depend on the introduction of nucleic acids into target cells. Multiple methods have been developed to facilitate such delivery including instrument based microinjection and electroporation, biological methods such as transduction, and chemical methods such as calcium phosphate precipitation, cationic polymers, and lipid based transfection, also known as lipofection. Here we report attempts to lipofect sea urchin coelomocytes using DOTAP lipofection reagent packaged with a range of molecules including fluorochromes, in addition to expression constructs, amplicons, and RNA encoding GFP. DOTAP has low cytotoxicity for coelomocytes, however, lipofection of a variety of molecules fails to produce any signature of success based on results from fluorescence microscopy and flow cytometry. While these results are negative, it is important to report failed attempts so that others conducting similar research do not repeat these approaches. Failure may be the outcome of elevated ionic strength of the coelomocyte culture medium, uptake and degradation of lipoplexes in the endosomal-lysosomal system, failure of the nucleic acids to escape the endosomal vesicles and enter the cytoplasm, and difficulties in lipofecting primary cultures of phagocytic cells. We encourage others to build on this report by using our information to optimize lipofection with a range of other approaches to work towards establishing a successful method of transfecting adult cells from marine invertebrates.

Controlled delivery of quantum dots using microelectrophoresis technique: Intracellular behavior and preservation of cell viability

The use of synthetic nanomaterials as contrast agents, sensors, and drug delivery vehicles in biological research primarily requires effective approaches for intracellular delivery. Recently, the well-accepted microelectrophoresis technique has been reported to exhibit the ability to deliver nanomaterials, quantum dots (QDs) as an example, into live cells, but information about cell viability and intracellular fate of delivered nanomaterials is yet to be provided. Here we show that cell viability following microelectrophoresis of QDs is strongly correlated with the amount of delivered QDs, which can be finely controlled by tuning the ejection duration to maintain long-term cell survival. We reveal that microelectrophoretic delivered QDs distribute homogeneously and present pure Brownian diffusion inside the cytoplasm without endosomal entrapment, having great potential for the study of dynamic intracellular events. We validate that microelectrophoresis is a powerful technique for the effective intracellular delivery of QDs and potentially various functional nanomaterials in biological research.

Effect of a Low-Level Laser on Liposomal Doxorubicin Efficacy in a Melanoma Cell Line

Introduction: The cytotoxicity of chemotherapy drugs is a significant challenge in the way of surmounting cancer. Liposomal drug delivery has proven to be efficacious in increasing the function of the drugs. Its potential to accumulate drugs in the target site and enhance the efficiency of anti-cancer agents with lower doses hinders their cytotoxicity on normal healthy cells. Since the release of drugs from liposomes is not generally on a controlled basis, several studies have suggested that external stimuli including lasers could be used to induce controlled release and boost the efficiency of liposomal drug delivery systems (LDDSs). Methods: The A375 cancer cell line was used and exposed to the liposomes containing doxorubicin in the presence of a low-level laser beam to investigate its effect on the liposomal stimuli-responsiveness release and its toxicity on cancer cells. So as to achieve that goal, Annexin V/PI was employed to analyze the number of cells that underwent apoptosis and necrosis. Results: Here, we report the effect of laser irradiation on LDDSs. According to the results obtained from the annexin V/PI assay, the pattern of viability status has shifted, so that the number of pre-apoptotic cells treated with liposomal doxorubicin and a laser beam was more than that of cells treated with only liposomal doxorubicin. Conclusion: The use of stimuli-responsive LDDSs, in this case, laser-responsive, has led to favorable circumstances in the treatment of cancer, offering enhanced cancer cell cytotoxicity.

High Throughput and Highly Controllable Methods for In Vitro Intracellular Delivery

In vitro and ex vivo intracellular delivery methods hold the key for releasing the full potential of tissue engineering, drug development, and many other applications. In recent years, there has been significant progress in the design and implementation of intracellular delivery systems capable of delivery at the same scale as viral transfection and bulk electroporation but offering fewer adverse outcomes. This review strives to examine a variety of methods for in vitro and ex vivo intracellular delivery such as flow-through microfluidics, engineered substrates, and automated probe-based systems from the perspective of throughput and control. Special attention is paid to a particularly promising method of electroporation using micro/nanochannel based porous substrates, which expose small patches of cell membrane to permeabilizing electric field. Porous substrate electroporation parameters discussed include system design, cells and cargos used, transfection efficiency and cell viability, and the electric field and its effects on molecular transport. The review concludes with discussion of potential new innovations which can arise from specific aspects of porous substrate-based electroporation platforms and high throughput, high control methods in general.

Intracellular Delivery by Membrane Disruption: Mechanisms, Strategies, and Concepts

Intracellular delivery is a key step in biological research and has enabled decades of biomedical discoveries. It is also becoming increasingly important in industrial and medical applications ranging from biomanufacture to cell-based therapies. Here, we review techniques for membrane disruption-based intracellular delivery from 1911 until the present. These methods achieve rapid, direct, and universal delivery of almost any cargo molecule or material that can be dispersed in solution. We start by covering the motivations for intracellular delivery and the challenges associated with the different cargo types-small molecules, proteins/peptides, nucleic acids, synthetic nanomaterials, and large cargo. The review then presents a broad comparison of delivery strategies followed by an analysis of membrane disruption mechanisms and the biology of the cell response. We cover mechanical, electrical, thermal, optical, and chemical strategies of membrane disruption with a particular emphasis on their applications and challenges to implementation. Throughout, we highlight specific mechanisms of membrane disruption and suggest areas in need of further experimentation. We hope the concepts discussed in our review inspire scientists and engineers with further ideas to improve intracellular delivery.

Multiple Mechanisms Drive Calcium Signal Dynamics around Laser-Induced Epithelial Wounds

Epithelial wound healing is an evolutionarily conserved process that requires coordination across a field of cells. Studies in many organisms have shown that cytosolic calcium levels rise within a field of cells around the wound and spread to neighboring cells, within seconds of wounding. Although calcium is a known potent second messenger and master regulator of wound-healing programs, it is unknown what initiates the rise of cytosolic calcium across the wound field. Here we use laser ablation, a commonly used technique for the precision removal of cells or subcellular components, as a tool to investigate mechanisms of calcium entry upon wounding. Despite its precise ablation capabilities, we find that this technique damages cells outside the primary wound via a laser-induced cavitation bubble, which forms and collapses within microseconds of ablation. This cavitation bubble damages the plasma membranes of cells it contacts, tens of microns away from the wound, allowing direct calcium entry from extracellular fluid into damaged cells. Approximately 45 s after this rapid influx of calcium, we observe a second influx of calcium that spreads to neighboring cells beyond the footprint of cavitation. The occurrence of this second, delayed calcium expansion event is predicted by wound size, indicating that a separate mechanism of calcium entry exists, corresponding to cell loss at the primary wound. Our research demonstrates that the damage profile of laser ablation is more similar to a crush injury than the precision removal of individual cells. The generation of membrane microtears upon ablation is consistent with studies in the field of optoporation, which investigate ablation-induced cellular permeability. We conclude that multiple types of damage, including microtears and cell loss, result in multiple mechanisms of calcium influx around epithelial wounds.

Low-density plasma formation in aqueous biological media using sub-nanosecond laser pulses

We demonstrate the formation of low- and high-density plasmas in aqueous media using sub-nanosecond laser pulses delivered at low numerical aperture (NA = 0.25). We observe two distinct regimes of plasma formation in deionized water, phosphate buffered saline, Minimum Essential Medium (MEM), and MEM supplemented with phenol red. Optical breakdown is first initiated in a low-energy regime and characterized by bubble formation without plasma luminescence with threshold pulse energies in the range of E_p ≈ 4-5 μJ, depending on media formulation. The onset of this regime occurs over a very narrow interval of pulse energies and produces small bubbles (R_max = 2-20 μm) due to a tiny conversion (η < 0.01%) of laser energy to bubble energy E_B. The lack of visible plasma luminescence, sharp energy onset, and low bubble energy conversion are all hallmarks of low-density plasma (LDP) formation. At higher pulse energies (E_p = 11-20 μJ), the process transitions to a second regime characterized by plasma luminescence and large bubble formation. Bubbles formed in this regime are 1-2 orders of magnitude larger in size [Formula: see text] due to a roughly two-order-of-magnitude increase in bubble energy conversion (η ≳ 3%). These characteristics are consistent with high-density plasma formation produced by avalanche ionization and thermal runaway. Additionally, we show that supplementation of MEM with fetal bovine serum (FBS) limits optical breakdown to this high-energy regime. The ability to produce LDPs using sub-nanosecond pulses focused at low NA in a variety of cell culture media formulations without FBS can provide for cellular manipulation at high throughput with precision approaching that of femtosecond pulses delivered at high NA.

Hydrodynamic determinants of cell necrosis and molecular delivery produced by pulsed laser microbeam irradiation of adherent cells

Time-resolved imaging, fluorescence microscopy, and hydrodynamic modeling were used to examine cell lysis and molecular delivery produced by picosecond and nanosecond pulsed laser microbeam irradiation in adherent cell cultures. Pulsed laser microbeam radiation at λ = 532 nm was delivered to confluent monolayers of PtK2 cells via a 40×, 0.8 NA microscope objective. Using laser microbeam pulse durations of 180-1100 ps and pulse energies of 0.5-10.5 μJ, we examined the resulting plasma formation and cavitation bubble dynamics that lead to laser-induced cell lysis, necrosis, and molecular delivery. The cavitation bubble dynamics are imaged at times of 0.5 ns to 50 μs after the pulsed laser microbeam irradiation, and fluorescence assays assess the resulting cell viability and molecular delivery of 3 kDa dextran molecules. Reductions in both the threshold laser microbeam pulse energy for plasma formation and the cavitation bubble energy are observed with decreasing pulse duration. These energy reductions provide for increased precision of laser-based cellular manipulation including cell lysis, cell necrosis, and molecular delivery. Hydrodynamic analysis reveals critical values for the shear-stress impulse generated by the cavitation bubble dynamics governs the location and spatial extent of cell necrosis and molecular delivery independent of pulse duration and pulse energy. Specifically, cellular exposure to a shear-stress impulse J≳0.1 Pa s ensures cell lysis or necrosis, whereas exposures in the range of 0.035≲J≲0.1 Pa s preserve cell viability while also enabling molecular delivery of 3 kDa dextran. Exposure to shear-stress impulses of J≲0.035 Pa s leaves the cells unaffected. Hydrodynamic analysis of these data, combined with data from studies of 6 ns microbeam irradiation, demonstrates the primacy of shear-stress impulse in determining cellular outcome resulting from pulsed laser microbeam irradiation spanning a nearly two-orders-of-magnitude range of pulse energy and pulse duration. These results provide a mechanistic foundation and design strategy applicable to a broad range of laser-based cellular manipulation procedures.

Single-cell nanotoxicity assays of superparamagnetic iron oxide nanoparticles

Properly evaluating the nanotoxicity of nanoparticles involves much more than bulk-cell assays of cell death by necrosis. Cells exposed to nanoparticles may undergo repairable oxidative stress and DNA damage or be induced into apoptosis. Exposure to nanoparticles may cause the cells to alter their proliferation or differentiation or their cell-cell signaling with neighboring cells in a tissue. Nanoparticles are usually more toxic to some cell subpopulations than others, and toxicity often varies with cell cycle. All of these facts dictate that any nanotoxicity assay must be at the single-cell level and must try whenever feasible and reasonable to include many of these other factors. Focusing on one type of quantitative measure of nanotoxicity, we describe flow and scanning image cytometry approaches to measuring nanotoxicity at the single-cell level by using a commonly used assay for distinguishing between necrotic and apoptotic causes of cell death by one type of nanoparticle. Flow cytometry is fast and quantitative, provided that the cells can be prepared into a single-cell suspension for analysis. But when cells cannot be put into suspension without altering nanotoxicity results, or if morphology, attachment, and stain location are important, a scanning image cytometry approach must be used. Both methods are described with application to a particular type of nanoparticle, a superparamagnetic iron oxide nanoparticle (SPION), as an example of how these assays may be applied to the more general problem of determining the effects of nanomaterial exposure to living cells.

Ongoing development of image cytometers

Image cytometry is a method for quantitative cellular analysis using images generally captured on slides or microfabricated chips. The flowless nature of data acquisition in image cytometry allows the use of value components, such as light-emitting diode excitation sources or low-cost charge-coupled device detectors. Unlike flow cytometry, the stationary cellular samples can be exposed to lower-intensity light and utilize less sensitive detectors with higher exposure times. Images are acquired and data is processed using recognition software to identify, count and analyze cells. Current image cytometers cannot replicate the quality of the data from flow cytometers or fluorescence microscopes with full functionality and performance components. Yet, the production of inexpensive image cytometers for use in small laboratories and clinics has made a compelling argument. The addition of fluorescence detection to the new generation of image cytometers has opened the field to a broader range of applications. This article will review the technical aspects and application of image cytometers, the recent progress in the field and available commercial devices.

Selective gene transfection of individual cells in vitro with plasmonic nanobubbles

Gene delivery and transfection of eukaryotic cells are widely used for research and for developing gene cell therapy. However, the existing methods lack selectivity, efficacy and safety when heterogeneous cell systems must be treated. We report a new method that employs plasmonic nanobubbles (PNBs) for delivery and transfection. A PNB is a novel, tunable cellular agent with a dual mechanical and optical action due to the formation of the vapor nanobubble around a transiently heated gold nanoparticle upon its exposure to a laser pulse. PNBs enabled the mechanical injection of the extracellular cDNA plasmid into the cytoplasm of individual target living cells, cultured leukemia cells and human CD34+ CD117+ stem cells and expression of a green fluorescent protein (GFP) in those cells. PNB generation and lifetime correlated with the expression of green fluorescent protein in PNB-treated cells. Optical scattering by PNBs additionally provided the detection of the target cells and the guidance of cDNA injection at single cell level. In both cell models PNBs demonstrated a gene transfection effect in a single pulse treatment with high selectivity, efficacy and safety. Thus, PNBs provided targeted gene delivery at the single cell level in a single pulse procedure that can be used for safe and effective gene therapy.

Single cell optical transfection

The plasma membrane of a eukaryotic cell is impermeable to most hydrophilic substances, yet the insertion of these materials into cells is an extremely important and universal requirement for the cell biologist. To address this need, many transfection techniques have been developed including viral, lipoplex, polyplex, capillary microinjection, gene gun and electroporation. The current discussion explores a procedure called optical injection, where a laser field transiently increases the membrane permeability to allow species to be internalized. If the internalized substance is a nucleic acid, such as DNA, RNA or small interfering RNA (siRNA), then the process is called optical transfection. This contactless, aseptic, single cell transfection method provides a key nanosurgical tool to the microscopist-the intracellular delivery of reagents and single nanoscopic objects. The experimental possibilities enabled by this technology are only beginning to be realized. A review of optical transfection is presented, along with a forecast of future applications of this rapidly developing and exciting technology.