Evaluation of an apatite cement as a root end filling material

Calcium orthophosphates in dentistry

Dental caries, also known as tooth decay or a cavity, remains a major public health problem in the most communities even though the prevalence of disease has decreased since the introduction of fluorides for dental care. Therefore, biomaterials to fill dental defects appear to be necessary to fulfill customers' needs regarding the properties and the processing of the products. Bioceramics and glass-ceramics are widely used for these purposes, as dental inlays, onlays, veneers, crowns or bridges. Calcium orthophosphates belong to bioceramics but they have some specific advantages over other types of bioceramics due to a chemical similarity to the inorganic part of both human and mammalian bones and teeth. Therefore, calcium orthophosphates (both alone and as components of various formulations) are used in dentistry as both dental fillers and implantable scaffolds. This review provides brief information on calcium orthophosphates and describes in details current state-of-the-art on their applications in dentistry and dentistry-related fields. Among the recognized dental specialties, calcium orthophosphates are most frequently used in periodontics; however, the majority of the publications on calcium orthophosphates in dentistry are devoted to unspecified "dental" fields.

Bioactive materials in endodontics

Endodontic treatment in dentistry is a delicate procedure and many treatment attempts fail. Despite constant development of new root canal filling techniques, the clinician is confronted with both a complex root canal system and the use of filling materials that are harmful for periapical tissues. This paper evaluates reported studies on biomaterials used in endodontics, including calcium hydroxide, mineral trioxide aggregate, calcium phosphate ceramics and calcium phosphate cements. Special emphasis is made on promising new biomaterials, such as injectable bone substitute and injectable calcium phosphate cements. These materials, which combine biocompatibility, bioactivity and rheological properties, could be good alternatives in endodontics as root canal fillers. They could also be used as drug-delivery vehicles (e.g., for antibiotics and growth factors) or as scaffolds in pulp tissue engineering.

A Systematic Review of In Vitro Retrograde Obturation Materials

The purpose of this review was two-fold: (a) to determine which retrograde obturation material(s) best prevents dye/ink penetration in vitro; and (b) to determine whether in vitro results agree with in vivo results. A MEDLINE search was conducted to identify in vitro studies published between January 1966 and October, week 4, 2003, conducted on human teeth, and published in English, German, or French language, testing the resistance to retrograde penetration of retrograde filling materials. The MEDLINE search identified 278 published articles. Of those, 115 studies examined the resistance to penetration of various retrograde filling materials, in vitro. Thirty-four studies met all the inclusion and validity criteria. The results indicate that, beyond 10 days in vitro, the most effective retrofilling materials, when measured by dye/ink penetration are: composites>glass ionomer cement>amalgam>orthograde gutta-percha>EBA. The results of these in vitro studies are not congruent with in vivo study results, suggesting a need to re-evaluate the clinical validity and importance of in vitro studies.

The comparative sealing ability of hydroxyapatite cement, mineral trioxide aggregate, and super ethoxybenzoic acid as root-end filling materials

A comparison was made of the ability of hydroxyapatite cement, mineral trioxide aggregate, and super ethoxybenzoic acid to prevent the leakage of bacteria from root canals, when used as root-end filling materials. The materials were tested in a double-chamber device in which a root segment connects the upper (delivery) chamber and the lower (receiving) chamber. The root segment was prepared by having the root canal instrumented to a #45 file, and a 3-mm-deep, root-end preparation placed at the apical foramen. The canal of each root segment was filled with gutta-percha, and the root-end preparation was filled with one of three test materials, mixed according to the manufacturer's directions. Negative controls were constructed with sticky wax sealing the apical foramen. A titered suspension of radioactively (3H-thymidine)-labeled bacteria (Enterococcus fecalis) was placed into the delivery chamber, and sterile saline was placed into the receiving chamber such that the apical third of each root section was immersed. At various time points, samples were taken from the receiving chamber, and measured for 3H activity. The results indicated that (a) all the test materials leaked significantly compared with the negative controls; and (b) there was no significant difference found between the leakage rates of the three materials tested.

Reconstruction of alveolar bone defect by calcium phosphate compounds

Osteoconductivity of newly developed calcium phosphate cements (CP-1, CP-2) was estimated in mandibular periapical alveolar bone of rats. The powder phase of CP-1 was an equimolar mixture of tetracalcium phosphate and dicalcium phosphate dihydrate, and that of CP-2 was alpha-tricalcium phosphate. The liquid phase of CP-1 and CP-2 was a solution containing tannic acid and citric acid. CP-1, CP-2, an apatitic sealer (ARS), or a zinc oxide eugenol sealer (ZOE) was respectively applied in the mechanically injured periapical regions through the root canals of both mandibular first molars of 15 rats. A further 15 rats were used as controls with no material in the region. The results of histopathological examination at 1, 3, and 5 weeks after operation were analyzed by the chi(2) test (95% confidence level). At 1 week, foreign-body giant cells were observed around CP-1 and CP-2, but not around ARS or ZOE. Congestion of small blood vessels was seen in bone defect areas of the controls. After 5 weeks, statistically significant bone reconstruction was induced by application of CP-1 (80.0%), CP-2 (90.0%) compared with ARS (33.3%). Fibrous scaring was seen in the controls. It is concluded that resolvability of CP-1 and CP-2 should contribute to osseous healing.

Bone-bonding behavior of alumina bead composite

Previously we developed an alumina bead composite (ABC) consisting of alumina bead powder (AL-P) and bisphenol-alpha-glycidyl methacrylate (Bis-GMA)-based resin and reported its excellent osteoconductivity in rat tibiae. In the present study, are evaluated histologically and mechanically the effect of alumina crystallinity on the osteoconductivity and bone-bonding strength of the composite. AL-P was manufactured by fusing crushed alpha-alumina powder and quenching it. The AL-P was composed mainly of amorphous and delta-crystal phases of alumina. Its average particle size was 3.5 microm, and it took a spherical form. Another composite (alpha ALC), filled with pure alpha-alumina powder (alpha AL-P), was used as a referential material. The proportion of powder added to each composite was 70% w/w. Mechanical testing of ABC and alpha ALC indicated that they would be strong enough for use under weight-bearing conditions. The affinity indices for ABC, determined using male Wistar rat tibiae, were significantly higher than those for alpha ALC (p < 0.0001) up to 8 weeks. Composite plates (15 x 10 x 2 mm) that had an uncured surface layer on one side were made in situ in a rectangular mold. One of the plates was implanted into the proximal metaphysis of the tibia of a male Japanese white rabbit, and the failure load was measured by a detaching test 10 weeks after implantation. The failure loads for ABC on its uncured surface [1.91+/-1.23 kgf (n = 8)] were significantly higher than those for alpha ALC on its uncured surface [0.35+/-0.33 kgf (n = 8); (p < 0.0001)], and they also were significantly higher than those for ABC on the other (cured surface) side (p < 0.0001). Histological examinations using rabbit tibiae revealed bone ingrowth into the composite only on the uncured surface of ABC. This study revealed that the amorphous phase of alumina and formation of an uncured surface layer are needed for the osteoconductive and bone-bonding ability of ABC. ABC shows promise as a basis for the development of a highly osteoconductive and mechanically strong biomaterial.

Treatment of root perforations with calcium hydroxide and SuperEBA cement: a clinical report

Iatrogenic root perforations sometimes occur during root canal treatment or when preparing the root canal for a post. The inflammation in the periradicular tissues caused by root perforation reduces the prognosis of the involved tooth. The situation may be further complicated if by coronal leakage, microorganisms are allowed to infect the canal and the periradicular region. This clinical report presents a nonsurgical technique, based on the internal matrix concept, using both calcium hydroxide and SuperEBA together to repair root perforations. The author has experienced good clinical results with this perforation repair technique.

Root end filling materials: a review

When non-surgical attempts prove unsuccessful or are contraindicated, surgical endodontic therapy is needed to save the tooth. The procedure usually consists of exposure of the involved area, root end resection, root end preparation and insertion of a root end filling material. Numerous materials have been suggested as root end filling materials. This article is a review of the literature on the suitability of various root end filling materials based on their leakage assessment, marginal adaptation, cytotoxicity, and usage test in experimental animals and humans.