Enzymatic biodegradation of synthetic atactic poly( R , S -3-hydroxybutyrate) enhanced by an amorphous nonbiodegradable polymer

Enzymatic hydrolysis of chemosynthesized atactic poly(3-hydroxybutyrate) by poly(3-hydroxyalkanoate) depolymerase from Acidovorax Sp. TP4 and Ralstonia pickettii T1

The enzymatic degradability of chemosynthesized atactic poly([R,S]-3-hydroxybutyrate) [a-P(3HB)] by two types of extracellular poly(3-hydroxyalkanoate) (PHA) depolymerases purified from Ralstonia pickettii T1 (PhaZ(ral)) and Acidovorax Sp. TP4 (PhaZ(aci)), defined respectively as PHA depolymerase types I and II according to the position of the lipase box in the catalytic domain, were studied. The enzymatic degradation of a-P(3HB) by PhaZ(aci) depolymerase was confirmed from the results of weight loss and the scanning electron micrographs. The degradation products were characterized by one- and two-dimension (1)H NMR spectroscopy. It was found that a-P(3HB) could be degraded into monomer, dimer, and trimer by PhaZ(aci) depolymerase at temperatures ranging from 4 to 20 degrees C, while a-P(3HB) could hardly be hydrolyzed by PhaZ(ral) depolymerase in the same temperature range. These results suggested that the chemosynthesized a-P(3HB) could be degraded in the pure state by natural PHA depolymerase.

Enzymatic degradation of atactic poly(R,S-3-hydroxybutyrate) induced by amorphous polymers and the enzymatic degradation temperature window of an amorphous polymer system

The phase structure and biodegradability were investigated for amorphous blends of chemosynthetic fully amorphous atactic poly(R,S-3-hydroxybutyrate) (a-PHB) with atactic poly(methyl methacrylate) (PMMA) and atactic poly(R,S-lactide) (a-PLA). The differential scanning calorimetry thermal analysis indicated that a-PHB/PMMA blends were partially miscible while a-PHB/a-PLA blends were miscible in the studied composition range. The biodegradations of the blends were carried out in phosphate buffer solution in the presence of bacterial poly(R-3-hydroxybutyrate) extracellular depolymerases purified from Alcaligenes faecalis T1 and P. stutzeri. Although a-PHB in the pure state was not degraded by these depolymerase, it was degraded by blending with PMMA and a-PLA. The results demonstrated that the enzymatic degradation of a-PHB can be induced by amorphous polymers such as PMMA and a-PLA. Also, the biodegradation rate of a-PHB in the blends decreased drastically when the degradation temperature is too much away from the polymer glass transition temperatures. On the basis of these results, a temperature window of the enzymatic degradation was first proposed for the blend and the essence of induced degradation was discussed.

Formation of and coalescence from the inclusion complex of a biodegradable block copolymer and alpha-cyclodextrin. 2: A novel way to regulate the biodegradation behavior of biodegradable block copolymers

A biodegradable block copolymer (PCL-b-PLLA, M(n) = 1.72 x 10(4), M(w)/M(n) = 1.37) of poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA) with very low crystallinity was obtained by forming the inclusion complex between alpha-cyclodextrin molecules and PCL-b-PLLA followed by coalescence of the guest polymer chains. Films of the as-synthesized and coalesced copolymer samples, PCL and PLLA homopolymers of approximately the same chain lengths as the corresponding blocks of PCL-b-PLLA, and a physical blend of PCL/PLLA homopolymers with the same molar composition as PCL-b-PLLA were prepared by melt-compression molding between Teflon plates. Subsequently, the in vitro biodegradation behavior of these films was studied in phosphate buffer solution containing lipase from Rhizopus arrhizus, by means of ultraviolet spectra, attenuated total reflectance FTIR spectra, differential scanning calorimetry, wide-angle X-ray diffraction measurements, and weight loss analysis. PCL segments were found to degrade much faster than PLLA segments, both in the pure state and in copolymer or blend samples. Consistent with our expectation, suppression of the phase separation, as well as a decrease of crystallinity, in the coalesced copolymer sample led to a much faster enzymatic degradation than that of either as-synthesized copolymer or the PCL/PLLA physical blend sample, especially during the early stages of biodegradation. Thus the biodegradation behavior of biodegradable block copolymers, which is of decisive importance in drug delivery and controlled release systems, may be regulated by the novel and convenient means recently reported by us.(1)