Retinal pigment epithelium engineering using synthetic biodegradable polymers

Acellularized Uvea Hydrogel as Novel Injectable Platform for Cell-Based Delivering Treatment of Retinal Degeneration and Optimizing Retinal Organoids Inducible System

Replenishing the retina with retinal pigment epithelial (RPE) cells derived from pluripotent stem cells (PSCs) has great promise for treating retinal degenerative diseases, but it is limited by poor cell survival and integration in vivo. Herein, porcine acellular sclera and uvea extracellular matrix (ECM) and their counterpart hydrogels are developed, and their effects on the biological behavior of human induced pluripotent stem cell (hiPSC)-derived RPE cells (hiPSC-RPE) and embryoid body (hiPSC-EB) differentiation are investigated. Both acellular ECM hydrogels have excellent biocompatibility and suitable biodegradability without evoking an obvious immune response. Most importantly, the decellularized uvea hydrogel-delivered cells' injection remarkably promotes the hiPSC-RPE cells' survival and integration in the subretinal space, rescues the photoreceptor cells' death and retinal gliosis, and restores vision in rats with retinal degeneration for a long duration. In addition, medium supplementation with decellularized uvea peptides promotes hiPSC-EBs onset morphogenesis and neural/retinal differentiation, forming layered retinal organoids. This study demonstrates that ECM hydrogel-delivered hiPSC-RPE cells' injection may be a useful approach for treating retinal degeneration disease, combined with an optimized retinal seeding cells' induction program, which has potential for clinical application.

Electrospun Nanofibers for Manipulating the Soft Tissue Regeneration

Soft tissue damage is a common clinical problem that affects the lives of a large number of patients all over the world. It is of great importance to develop functional...

Advanced biomedical hydrogels: molecular architecture and its impact on medical applications

Hydrogels are cross-linked polymeric networks swollen in water, physiological aqueous solutions or biological fluids. They are synthesized by a wide range of polymerization methods that allow for the introduction of linear and branched units with specific molecular characteristics. In addition, they can be tuned to exhibit desirable chemical characteristics including hydrophilicity or hydrophobicity. The synthesized hydrogels can be anionic, cationic, or amphiphilic and can contain multifunctional cross-links, junctions or tie points. Beyond these characteristics, hydrogels exhibit compatibility with biological systems, and can be synthesized to render systems that swell or collapse in response to external stimuli. This versatility and compatibility have led to better understanding of how the hydrogel's molecular architecture will affect their physicochemical, mechanical and biological properties. We present a critical summary of the main methods to synthesize hydrogels, which define their architecture, and advanced structural characteristics for macromolecular/biological applications.

Nanomaterial-based delivery vehicles for therapeutic cancer vaccine development

Nanomaterial-based delivery vehicles such as lipid-based, polymer-based, inorganics-based, and bio-inspired vehicles often carry distinct and attractive advantages in the development of therapeutic cancer vaccines. Based on various delivery vehicles, specifically designed nanomaterials-based vaccines are highly advantageous in boosting therapeutic and prophylactic antitumor immunities. Specifically, therapeutic vaccines featuring unique properties have made major contributions to the enhancement of antigen immunogenicity, encapsulation efficiency, biocompatibility, and stability, as well as promoting antigen cross-presentation and specific CD8+ T cell responses. However, for clinical applications, tumor-associated antigen-derived vaccines could be an obstacle, involving immune tolerance and deficiency of tumor specificities, in achieving maximum therapeutic indices. However, when using bioinformatics predictions with emerging innovations of in silico tools, neoantigen-based therapeutic vaccines might become potent personalized vaccines for tumor treatments. In this review, we summarize the development of preclinical therapeutic cancer vaccines and the advancements of nanomaterial-based delivery vehicles for cancer immunotherapies, which provide the basis for a personalized vaccine delivery platform. Moreover, we review the existing challenges and future perspectives of nanomaterial-based personalized vaccines for novel tumor immunotherapies.

Dopamine-Functionalized Gellan Gum Hydrogel as a Candidate Biomaterial for a Retinal Pigment Epithelium Cell Delivery System

In this study, dopamine-functionalized gellan gum (DFG) hydrogel was prepared as a carrier for retinal pigment epithelium (RPE) cell delivery via a carbodiimide reaction. The carboxylic acid of gellan gum (GG) was replaced with catechol in a 21.3% yield, which was confirmed by NMR. Sol fraction and weight loss measurements revealed that dopamine improved degradability in the GG hydrogel. Measurements of the viscosity, injection force, and compressibility also showed that dopamine-functionalized GG hydrogels had more desirable rheological/mechanical properties for improving injectability. These characteristics were confirmed to arise from the GG's helix structure loosened by the dopamine's bulky nature. Moreover, dopamine's hydrophilic characteristics were confirmed to create a more favorable microenvironment for cell growth by promoting swelling capability and cell attachment. This improved biocompatibility became more pronounced when the hydrophilicity of dopamine was combined with a larger specific surface area stemming from the less porous structure of the dopamine-grafted hydrogels. This effect was apparent from the live/dead staining images of the as-prepared hydrogels. Meanwhile, the nonionic cross-linked DFG (DG) hydrogel showed the lowest protein expression in the immunofluorescence staining images obtained after 28 days of culture, supporting that it had the highest degradability and associated cell-releasing ability. That tendency was also observed in the gene expression data acquired by real-time polymerase chain reaction (RT-PCR) analysis. RT-PCR analysis also revealed that the DG hydrogel carrier could upregulate the visual function-related gene of RPE. Overall, the DG hydrogel system demonstrated its feasibility as a carrier of RPE cells and its potential as a means of improving visual function.

Cell-Based Therapies for Age-Related Macular Degeneration

Age-related macular degeneration (AMD) is a leading cause of blindness worldwide. The pathogenesis of AMD involves dysfunction and loss of the retinal pigment epithelium (RPE), a monolayer of cells that provide nourishment and functional support for the overlying photoreceptors. RPE cells in mammals are not known to divide, renew or regenerate in vivo, and in advanced AMD, RPE loss leads to degeneration of the photoreceptors and impairment of vision. One possible therapeutic approach would be to support and replace the failing RPE cells of affected patients, and indeed moderate success of surgical procedures in which relatively healthy autologous RPE from the peripheral retina of the same eye was transplanted under the retina in the macular area suggested that RPE replacement could be a means to attenuate photoreceptor cell loss. This prompted exploration of the possibility to use pluripotent stem cells (PSCs) as a potential source for "healthy and young" RPE cells for such cell-based therapy of AMD. Various approaches ranging from the use of allogeneic embryonic stem cells to autologous induced pluripotent stem cells are now being tested within early clinical trials. Such PSC-derived RPE cells are either injected into the subretinal space as a suspension, or transplanted as a monolayer patch upon scaffold support. Although most of these approaches are at early clinical stages, safety of the RPE product has been demonstrated by several of these studies. Here, we review the concept of cell-based therapy of AMD and provide an update on current progress in the field of RPE transplantation.

Cell-based approaches towards treating age-related macular degeneration

Age-related macular degeneration as one of the most common causes of worldwide vision loss needs a proper approach for treatment. Therein, cell therapy and regenerative medicine can hold a great promise to be an effective approach. Accordingly, some preclinical and clinical studies were conducted to search around the therapeutic influence of stem cells in Age-related macular degeneration models and subjects. Hereupon, the purpose of the current review is to discuss the mechanisms of age-related macular degeneration, appropriate animal models along with suitable dosage and route of stem cell administration for its treatment.

Regenerative medicine as a novel strategy for AMD treatment: a review

Age-related macular degeneration (AMD) is known as a major cause of irreversible blindness in elderly adults. The segment of the retina responsible for central vision damages in the disease process. Degeneration of retinal pigmented epithelium (RPE) cells, photoreceptors, and choriocapillaris associated with aging participate for visual loss. In 2010, AMD involved 6.6% of all blindness cases around the world. Some of the researches have evaluated the replacing of damaged RPE in AMD patients by using the cells from various sources. Today, the advancement of RPE differentiation or generation from stem cells has been gained, and currently, clinical trials are testing the efficiency and safety of replacing degenerated RPE with healthy RPE. However, the therapeutic success of RPE transplantation may be restricted unless the transplanted cells can be adhered, distributed and survive for long-term in the transplanted site without any infections. In recent years a variety of scaffold types were used as a carrier for RPE transplantation and AMD treatment. In this review, we have discussed types of scaffolds; natural or synthetic, solid or hydrogel and their results in RPE replacement. Eventually, our aim is highlighting the novel and best scaffold carriers that may have potentially promoting the efficacy of RPE transplantation.

Injectable taurine-loaded alginate hydrogels for retinal pigment epithelium (RPE) regeneration

The purpose of this study is to produce injectable taurine (Tr)-loaded alginate (Agn) hydrogel for age-related macular degeneration (AMD) treatment by inducing the regeneration of RPE (retinal pigment epithelium) cells. Porosity and swelling ratio were measured to evaluate the mechanical properties of the hydrogels, and Fourier transform infrared spectroscopy (FTIR) was used to evaluate the physical and chemical properties. RPE cells extracted from the pigmented epithelium of rabbits were encapsulated in the Tr/Agn hydrogels. Cells proliferation and migration were improved in Tr/Agn hydrogels with an enhanced expression of RPE-specific genes including RPE65, CRALBP, NPR-A, MITF and collagen type I and II. In vivo tests demonstrated the excellent biocompatibility and biodegradability without inflammatory response by the host when implanted with the hydrogel. Moreover, when the Tr/Agn hydrogels were injected into the sub-retinal space, high adhesion of RPE cells and retinal regeneration were confirmed. These results demonstrated a potential role of injectable Tr/Agn hydrogels as potential therapeutic tools for the treatment of retinal diseases, including AMD.

The Application of Biomaterials to Tissue Engineering Neural Retina and Retinal Pigment Epithelium

The prevalence of degenerative retinal disease is ever increasing as life expectancy rises globally. The human retina fails to regenerate and the use of human embryonic stem cells (hESCs) and human-induced pluripotent stem cells (hiPSCs) to engineer retinal tissue is of particular interest due to the limited availability of suitable allogeneic or autologous tissue. Retinal tissue and its development are well characterized, which have resulted in robust assays to assess the development of tissue-engineered retina. Retinal tissue can be generated in vitro from hESCs and hiPSCs without biomaterial scaffolds, but despite advancements, protocols remain slow, expensive, and fail to result in mature functional tissue. Several recent studies have demonstrated the potential of biomaterial scaffolds to enhance generation of hESC/hiPSC-derived retinal tissue, including synthetic polymers, silk, alginate, hyaluronic acid, and extracellular matrix molecules. This review outlines the advances that have been made toward tissue-engineered neural retina and retinal pigment epithelium (RPE) for clinical application in recent years, including the success of clinical trials involving transplantation of cells and tissue to promote retinal repair; and the evidence from in vitro and animal studies that biomaterials can enhance development and integration of retinal tissue.

Enhanced retinal pigment epithelium (RPE) regeneration using curcumin/alginate hydrogels: In vitro evaluation

The retinal pigment epithelium (RPE) plays a significant role in retaining structural integrity of eye. Factors such as reduction in cell regeneration due to aging and physical injury pose a major hurdle in RPE regeneration. In this study, we exploited the use of alginate (AGT) incorporated with Curcumin (CCI) forming a hydrogel based system CCI/AGT. The fabricated hydrogel could anchor RPE cell in it. In vitro cell analysis revealed that the CCI/AGT hydrogel shows good biocompatibility, enhanced cell growth ability and higher ECM formation compared to the pure AGT hydrogel. In particular, the presence of CCI in the hydrogels enhances the cells proliferation of the 23% respect to the pure alginate. Also the expression of crucial genes for retina functions and matrix production were positively affected by CCI presence, with an increment of 45% for RPE65, 32% for CRALBP and 26% for Collagen type 1. In vitro tests demonstrated the potential application of CCI/AGT hydrogels for transplantation under the sub-retinal space acting as a cell delivery vehicle and also their capability to provide an appropriate environment for RPE regeneration. These results suggest that CCI/AGT hydrogel could be translated into a potential surgical graft for biological implantation of retinal tissue engineering.

Remodeling the Human Adult Stem Cell Niche for Regenerative Medicine Applications

The interactions between stem cells and their surrounding microenvironment are pivotal to determine tissue homeostasis and stem cell renewal or differentiation and regeneration in vivo. Ever since they were postulated in 1978, stem cell niches have been identified and characterized in many germline and adult tissues. Comprehensive studies over the last decades helped to clarify the critical components of stem cell niches that include cellular, extracellular, biochemical, molecular, and physical regulators. This knowledge has direct impact on their inherent regenerative potential. Clinical applications demand readily available cell sources that, under controlled conditions, provide a specific therapeutic function. Thus, translational medicine aims at optimizing in vitro or in vivo the various components and complex architecture of the niche to exploit its therapeutic potential. Accordingly, the objective is to recreate the natural niche microenvironment during cell therapy process development and closely comply with the requests of regulatory authorities. In this paper, we review the most recent advances of translational medicine approaches that target the adult stem cell natural niche microenvironment for regenerative medicine applications.

Scaffolds for retinal pigment epithelial cell transplantation in age-related macular degeneration

In several retinal degenerative diseases, including age-related macular degeneration, the retinal pigment epithelium, a highly functionalized cell monolayer, becomes dysfunctional. These retinal diseases are marked by early retinal pigment epithelium dysfunction reducing its ability to maintain a healthy retina, hence making the retinal pigment epithelium an attractive target for treatment. Cell therapies, including bolus cell injections, have been investigated with mixed results. Since bolus cell injection does not promote the proper monolayer architecture, scaffolds seeded with retinal pigment epithelium cells and then implanted have been increasingly investigated. Such cell-seeded scaffolds address both the dysfunction of the retinal pigment epithelium cells and age-related retinal changes that inhibit the efficacy of cell-only therapies. Currently, several groups are investigating retinal therapies using seeded cells from a number of cell sources on a variety of scaffolds, such as degradable, non-degradable, natural, and artificial substrates. This review describes the variety of scaffolds that have been developed for the implantation of retinal pigment epithelium cells.

Langmuir-Schaefer film deposition onto honeycomb porous films for retinal tissue engineering

Age-related macular degeneration (AMD) is the leading cause of vision loss in senior citizens in the developed world. The disease is characterised by the degeneration of a specific cell layer at the back of the eye - the retinal pigment epithelium (RPE), which is essential in retinal function. The most promising therapeutic option to restore the lost vision is considered to be RPE cell transplantation. This work focuses on the development of biodegradable biomaterials with similar properties to the native Bruch's membrane as carriers for RPE cells. In particular, the breath figure (BF) method was used to create semi-permeable microporous films, which were thereafter used as the substrate for the consecutive Langmuir-Schaefer (LS) deposition of highly organised layers of collagen type I and collagen type IV. The newly developed biomaterials were further characterised in terms of surface porosity, roughness, hydrophilicity, collagen distribution, diffusion properties and hydrolytic stability. Human embryonic stem cell-derived RPE cells (hESC-RPE) cultured on the biomaterials showed good adhesion, spreading and morphology, as well as the expression of specific protein markers. Cell function was additionally confirmed by the assessment of the phagocytic capacity of hESC-RPE. Throughout the study, microporous films consistently showed better results as cell culture materials for hESC-RPE than dip-coated controls. This work demonstrates the potential of the BF-LS combined technologies to create biomimetic prosthetic Bruch's membranes for hESC-RPE transplantation.

STATEMENT OF SIGNIFICANCE

Age-related macular degeneration (AMD) is a leading cause of central blindness in developed countries, associated with the degeneration of the retinal pigment epithelium (RPE), a specific cell layer at the back of the eye. Transplantation of RPE cells derived from stem cells is considered the best option to treat these patients. In this work, we developed a cell carrier for human embryonic stem cell-derived RPE that resembled the upper layers of the membrane that naturally supports the RPE cells in the retina. The new combination of technologies employed in this study resulted in very promising materials as confirmed by our studies on cell proliferation, morphology and function.

The influence of substrate modulus on retinal pigment epithelial cells

Although transplantation of retinal pigment epithelial (RPE) cells has shown promise for the treatment of retinal degenerative diseases, this therapeutic approach is not without challenges. Two major challenges are RPE cell dedifferentiation and inflammatory response following transplantation. The aim of this work is to understand how the rigidity of a scaffold, a relatively unexplored design aspect in retinal tissue engineering, affects RPE cells, particularly the pathways associated with the aforementioned challenges. Poly(ethylene glycol) diacrylate (PEGDA) of varying molecular weights from 3.4 to 20 kDa were photopolymerized to fabricate scaffolds. The Young's modulus of the scaffolds varied from 60 to 1200 kPa. A cell study was then conducted to test the effects of scaffold rigidity on RPE cells. A cell adhesion peptide motif of arginine-glycine-aspartic acid-serine (RGDS) was conjugated to 60 and 1200 kPa scaffolds and ARPE-19 cells, a human RPE cell line, were seeded onto these hydrogels. Cells grown on scaffolds demonstrated qualitatively different adhesion properties, metabolic activity, and gene expression at an mRNA level. IL-6 and MCP-1, two inflammation markers known to recruit microglial into the retina, had the same expression pattern with cells having the highest expression on the high modulus scaffold and lowest expression on the control substrate. This study demonstrates that scaffold rigidity, an important design parameter in other areas of tissue engineering, affects cell adhesion, activity, and expression of RPE cells. Though more exploration is needed, this begins to lay a foundation for optimizing scaffold rigidity to promote long-term success of RPE scaffolds. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1260-1266, 2017.

Current advances in electrospun gelatin-based scaffolds for tissue engineering applications

The development of biomimetic highly-porous scaffolds is essential for successful tissue engineering. Electrospun nanofibers are highly versatile platforms for a broad range of applications in different research areas. In the biomedical field, micro/nanoscale fibrous structures have gained great interest for wound dressings, drug delivery systems, soft and hard-tissue engineering scaffolds, enzyme immobilization, among other healthcare applications. In this mini-review, electrospun gelatin-based scaffolds for a variety of tissue engineering applications, such as bone, cartilage, skin, nerve, and ocular and vascular tissue engineering, are reviewed and discussed. Gelatin blends with natural or synthetic polymers exhibit physicochemical, biomechanical, and biocompatibility properties very attractive for scaffolding. Current advances and challenges on this research field are presented.

Influence of Cross-Linker Concentration on the Functionality of Carbodiimide Cross-Linked Gelatin Membranes for Retinal Sheet Carriers

Carbodiimide cross-linking can easily regulate the functionality of gelatin carriers used for retinal sheet delivery. This paper investigates the effect of cross-linker concentrations (0-0.4 mmol EDC/mg gelatin membrane (GM)) on the properties of the chemically-modified GMs. ATR-FT-IR and ninhydrin analyses results consistently indicated that the EDC cross-linking reaction approaches saturation at concentrations around 0.02 mmol EDC/mg GM. The thermal stability and resistance to water dissolution and collagenase digestion were significantly enhanced with increasing cross-linker concentration from 0.001 to 0.02 mmol EDC/mg GM. In addition, the chemical cross-linking did not affect the ability to form a tissue-encapsulating structure at 37°C. Irrespective of their cross-linking degree, the GMs had an appropriate degradation rate sufficient to allow tissue integration. It was noted that, although high cross-linker concentrations can be used to improve the delivery efficiency of gelatin samples, the treatment with 0.1-0.4 mmol EDC/mg GM may lead to poor biocompatibility. Results of Live/Dead and pro-inflammatory cytokine expression analyses showed that the exposure of ARPE-19 cultures to the test materials cross-linked with a concentration ≥0.1 mmol EDC/mg GM induces significant cytotoxicity and high levels of interleukin-1β and interleukin-6. However, the presence of EDC cross-linked gelatin membranes in the culture medium had no effect on the glutamate uptake capacity. It is concluded that among the cross-linked gelatin samples studied, 0.02 mmol EDC/mg GM is the best cross-linker concentration for preparation of retinal sheet delivery carriers.

Neuronal Differentiation of Induced Pluripotent Stem Cells on Surfactant Templated Chitosan Hydrogels

The development of effective tissue engineering materials requires careful consideration of several properties beyond biocompatibility, including permeability and mechanical stiffness. While surfactant templating has been used for over a decade to control the physical properties of photopolymer materials, the potential benefit of this technique with regard to biomaterials has yet to be fully explored. Herein we demonstrate that surfactant templating can be used to tune the water uptake and compressive modulus of photo-cross-linked chitosan hydrogels. Interestingly, templating with quaternary ammonium surfactants also hedges against property fluctuations that occur with changing pH. Further, we demonstrate that, after adequate surfactant removal, these materials are nontoxic, support the attachment of induced pluripotent stem cells and facilitate stem cell differentiation to neuronal phenotypes. These results demonstrate the utility of surfactant templating for optimizing the properties of biomaterials intended for a variety of applications, including retinal regeneration.

Honeycomb porous films as permeable scaffold materials for human embryonic stem cell-derived retinal pigment epithelium

Age-related macular degeneration (AMD) is a leading cause of blindness in developed countries, characterised by the degeneration of the retinal pigment epithelium (RPE), a pigmented cell monolayer that closely interacts with the photoreceptors. RPE transplantation is thus considered a very promising therapeutic option to treat this disease. In this work, porous honeycomb-like films are for the first time investigated as scaffold materials for human embryonic stem cell-derived retinal pigment epithelium (hESC-RPE). By changing the conditions during film preparation, it was possible to produce films with homogeneous pore distribution and adequate pore size (∼3-5 µm), that is large enough to ensure high permeability but small enough to enable cell adherence and spreading. A brief dip-coating procedure with collagen type IV enabled the homogeneous adsorption of the protein to the walls and bottom of pores, increasing the hydrophilicity of the surface. hESC-RPE adhered and proliferated on all the collagen-coated materials, regardless of small differences in pore size. The differentiation of hESC-RPE was confirmed by the detection of specific RPE protein markers. These results suggest that the porous honeycomb films can be promising candidates for hESC-RPE tissue engineering, importantly enabling the free flow of ions and molecules across the material. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1646-1656, 2016.

Differentiation of Induced Pluripotent Stem Cells to Neural Retinal Precursor Cells on Porous Poly-Lactic-co-Glycolic Acid Scaffolds

PURPOSE

Cell replacement therapy for the treatment of retinal degeneration is an increasingly feasible approach, but one that still requires optimization of the transplantation strategy. To this end, various polymer substrates can increase cell survival and integration, although the effect of their pore size on cell behavior, particularly differentiation, has yet to be explored.

METHODS

Salt crystals of varying known size were used to impart structure to poly(lactic-co-glycolic acid) (PLGA) scaffolds by a salt leaching/solvent evaporation process. Mouse induced pluripotent stem cells (miPSCs) were seeded to the polymer scaffolds and supplemented with retinal differentiation media for up to 2 weeks. Proliferation was measured during the course of 2 weeks, while differentiation was evaluated using cell morphology and expression of early retinal development markers.

RESULTS

The salt leaching method of porous PLGA fabrication resulted in amorphous smooth pores. Cells attached to these scaffolds and proliferated, reaching a maximum cell number at 10 days postseeding that was 5 times higher on porous PLGA than on nonporous controls. The morphology of many of these cells, including their formation of neurites, was suggestive of neural phenotypes, while their expression of Sox2, Pax6, and Otx2 indicates early retinal development.

CONCLUSIONS

The use of porous PLGA scaffolds to differentiate iPSCs to retinal phenotypes is a feasible pretransplantation approach. This adds to an important knowledge base; understanding how developing retinal cells interact with polymer substrates with varying structure is a crucial component of optimizing cell therapy strategies.

Patient-specific induced pluripotent stem cells (iPSCs) for the study and treatment of retinal degenerative diseases

Vision is the sense that we use to navigate the world around us. Thus it is not surprising that blindness is one of people's most feared maladies. Heritable diseases of the retina, such as age-related macular degeneration and retinitis pigmentosa, are the leading cause of blindness in the developed world, collectively affecting as many as one-third of all people over the age of 75, to some degree. For decades, scientists have dreamed of preventing vision loss or of restoring the vision of patients affected with retinal degeneration through drug therapy, gene augmentation or a cell-based transplantation approach. In this review we will discuss the use of the induced pluripotent stem cell technology to model and develop various treatment modalities for the treatment of inherited retinal degenerative disease. We will focus on the use of iPSCs for interrogation of disease pathophysiology, analysis of drug and gene therapeutics and as a source of autologous cells for cell transplantation and replacement.

Nanomechanical properties of poly(lactic-co-glycolic) acid film during degradation

Despite the potential applications of poly(lactic-co-glycolic) acid (PLGA) coatings in medical devices, the mechanical properties of this material during degradation are poorly understood. In the present work, the nanomechanical properties and degradation of PLGA film were investigated. Hydrolysis of solvent-cast PLGA film was studied in buffer solution at 37 °C. The mass loss, water uptake, molecular weight, crystallinity and surface morphology of the film were tracked during degradation over 20 days. Characterization of the surface hardness and Young's modulus was performed using the nanoindentation technique for different indentation loads. The initially amorphous films were found to remain amorphous during degradation. The molecular weight of the film decreased quickly during the initial days of degradation. Diffusion of water into the film resulted in a reduction in surface hardness during the first few days, followed by an increase that was due to the surface roughness. There was a significant delay between the decrease in the mechanical properties of the film and the decrease in the molecular weight. A sudden decline in mechanical properties indicated that significant bulk degradation had occurred.

Mechanical properties of murine and porcine ocular tissues in compression

Sub-retinal implantation of foreign materials is becoming an increasingly common feature of novel therapies for retinal dysfunction. The ultimate compatibility of implants depends not only on their in vitro chemical compatibility, but also on how well the mechanical properties of the material match those of the native tissue. In order to optimize the mechanical properties of retinal implants, the mechanical properties of the mammalian retina itself must be carefully characterized. In this study, the compressive moduli of eye tissues, especially the retina, were probed using a dynamic mechanical analysis instrument in static mode. The retinal compressive modulus was lower than that of the sclera or cornea, but higher than that of the RPE and choroid. Compressive modulus remained relatively stable with age. Conversely, apparent retinal softening occurred at an early age in mice with inherited retinal degeneration. Compressive modulus is an important consideration for the design of retinal implants. Polymer scaffolds with moduli that are substantially different than that of the native tissue in which they will ultimately reside will be less likely to aid in the differentiation and development of the appropriate cell types in vitro and will have reduced biocompatibility in vivo.

Topographical control of ocular cell types for tissue engineering

Visual impairment affects over 285 million people worldwide and has a major impact on an individual's quality of life. Tissue engineering has the potential to increase the quality of life for many of these patients by preventing vision loss or restoring vision using cell-based therapies. However, these strategies will require an understanding of the microenvironmental factors that influence cell behavior. The eye is a well-organized organ whose structural complexity is essential for proper function. Interactions between ocular cells and their highly ordered extracellular matrix are necessary for maintaining key tissue properties including corneal transparency and retinal lamination. Therefore, it is not surprising that culturing these cells in vitro on traditional flat substrates result in irregular morphology. Instead, topographically patterned biomaterials better mimic native extracellular matrix and have been shown to elicit in vivo-like morphology and gene expression which is essential for tissue engineering. Herein we review multiple methods for producing well-controlled topography and discuss optimal biomaterial scaffold design for cells of the cornea, retina, and lens.

ATTACHMENT AND PROLIFERATION OF RETINAL PIGMENT EPITHELIAL CELLS ON SMALL INTESTINE SUBMUCOSA POWDER IMPREGNATED POLY(L-LACTIDE-CO-GLYCOLIDE) FILM

The retinal pigment epithelium (RPE) closely interacts with photoreceptors in the maintenance of visual function. The native RPEs exist as a monolayer structure and have a mottled brown color due to the presence of melanin and other pigments including lipofuscin granules, which accumulate with age. In age-related macular degeneration (AMD), RPE's dysfunction and changes in Bruch's membrane occur. Thus, small intestine submucosa/poly(lactic-co-glycolic acid) (SIS/PLGA) film is a biomimetic transplant consisting of a layer of healthy RPE cells cultured on a support membrane. The goals of this study were to evaluate the effects of attachment and proliferation of RPEs on SIS/PLGA films. Porcine SIS is an acellular tissue and widely used as a biomaterial without immunorejection responses, whereas PLGA is a biodegradable synthetic polymer with acceptable mechanical strength and well-controlled degradation rate. We fabricated SIS/PLGA films using 20 wt% of SIS. We measured MTT to confirm cellular adhesion of cell number attached on film at 1, 3, 5, and 7 days. Morphology of cellular adhesion on films was confirmed by scanning electron microscopy at 1, 3, and 7 days. Further, reverse transcription polymerase chain reaction (RT-PCR) was conducted to confirm messenger RNA expression of RPE65 as RPE's marker and expression of cytokeratin, and RPE65 were determined by AEC immunocytochemical staining. These results suggest that SIS provides suitable surface to RPEs.

Role of poly(lactide-co-glycolide) particle size on gas-foamed scaffolds

Macroporous polymeric scaffolds are frequently used in tissue engineering to allow for cell seeding and host cell invasion of the scaffold following implantation. The process of gas foaming/particulate leaching (GF/PL) is one method to form porous three dimensional scaffolds from particulate poly(lactide-co-glycolide) (PLG). The current study was designed to test the hypothesis that the size of the polymer particles used in this process will control the properties of the scaffolds. Scaffolds were prepared from PLG particles of various sizes (less than 75 microm, 75-106 microm, 106-250 microm and 250-425 microm) and subsequently analyzed. Scaffolds formed from large particles (250-425 microm) displayed significantly decreased compressive moduli, as compared to scaffolds fabricated from smaller particles. In addition, these scaffolds have a pore structure that is less interconnected and contains closed pores. Analysis of tissue in-growth, utilizing a novel computer-aided method, demonstrated that scaffolds formed from smaller particle sizes (less than 106 microm) have significantly more tissue penetration than those formed from larger particle sizes (greater than 106 microm). These results indicate that using small PLG particles (less than 106 microm) leads to high elastic moduli, provides a more interconnected pore structure and promotes greater tissue penetration into the scaffolds in vivo.

Subretinal implantation of electrospun, short nanowire, and smooth poly(ε-caprolactone) scaffolds to the subretinal space of porcine eyes

Biodegradable scaffolds play an important adjunct role in transplantation of retinal progenitor cells (RPCs) to the subretinal space. Poly(ε-Caprolactone) (PCL) scaffolds with different modifications were subretinally implanted in 28 porcine eyes and evaluated by multifocal electroretinography (mfERG) and histology after 6 weeks of observation. PCL Short Nanowire, PCL Electrospun, and PCL Smooth scaffolds were well tolerated in the subretinal space in pigs and caused no inflammation and limited tissue disruption. PCL Short Nanowire had an average rate of preserved overlying outer retina 17% higher than PCL Electrospun and 25% higher than PCL Smooth. Furthermore, PCL Short Nanowire was found to have the most suitable degree of stiffness for surgical delivery to the subretinal space. The membrane-induced photoreceptor damage could be shown on mfERG, but the reductions in P1 amplitude were only significant for the PCL Smooth. We conclude that of the tested scaffolds, PCL Short Nanowire is the best candidate for subretinal implantation.

The influence of brightness on functional assessment by mferg: a study on scaffolds used in retinal cell transplantation in pigs

To determine the effect of membrane brightness on multifocal electroretinograms (mfERGs), we implanted poly lactic-co-glycolic acid (PLGA) membranes in the subretinal space of 11 porcine eyes. We compared membranes with their native shiny white color with membranes that were stained with a blue dye (Brilliant Blue). Histological and electrophysiological evaluation of the overlying retina was carried out 6 weeks after implantation. Histologically, both white and blue membranes degraded in a spongiform manner leaving a disrupted outer retina with no preserved photoreceptor segments. Multifocal ERG revealed the white membranes to have a significantly higher P1-amplitude ratio than the blue (P = 0.027), and a correlation between brightness ratio and P1-amplitude ratio was found (r = 0.762). Based on our findings, we conclude that bright subretinal objects can produce normal mfERG amplitude ratios even when the adjacent photoreceptors are missing. Functional assessment with mfERG in scaffold implant studies should therefore be evaluated with care.

Pluripotent human stem cells for the treatment of retinal disease

Despite advancements made in our understanding of ocular biology, therapeutic options for many debilitating retinal diseases remain limited. Stem cell-based therapies are a potential avenue for treatment of retinal disease, and this mini-review will focus on current research in this area. Cellular therapies to replace retinal pigmented epithelium (RPE) and/or photoreceptors to treat age-related macular degeneration (AMD), Stargardt's macular dystrophy, and retinitis pigmentosa are currently being developed. Over the past decade, significant advancements have been made using different types of human stem cells with varying capacities to differentiate into these target retinal cell types. We review and evaluate pluripotent stem cells, both human embryonic stem cells and human induced pluripotent stem cells, as well as protocols for differentiation of ocular cells, and culture and transplant techniques that might be used to deliver cells to patients.

Polyurethanes as supports for human retinal pigment epithelium cell growth

PURPOSE

The transplant of retinal pigment epithelium (RPE) cells on supports may well be an effective therapeutic approach to improve the visual results of patients with age-related macular degeneration. In this study, two biodegradable polyurethanes were investigated as supports for human RPE cells (ARPE-19).

METHODS

Polyurethane aqueous dispersions based on poly(caprolactone) and/or poly(ethylene glycol) as soft segments, and isophorone diisocyanate and hydrazine as hard segments were prepared. Polyurethane films were produced by casting the dispersions and allowing them to dry at room temperature for one week. The ARPE-19 cells were seeded onto the polyurethane films and they were investigated as supports for in vitro adhesion, proliferation, and uniform distribution of differentiated ARPE-19 cells. Additionally, the in vivo ocular biocompatibility of the polyurethane films was evaluated.

RESULTS

The RPE adhered to and proliferated onto the polyurethane supports, thus establishing cell-PUD surface interactions. Upon confluence, the cells formed an organized monolayer, exhibited a polygonal appearance, and displayed actin filaments which ran along the upper cytoplasm. At 15 days of seeding, the occluding expression was confirmed between adjacent cells, representing the barrier functionality of epithelial cells on polymeric surfaces and the establishment of cell-cell interactions. Results from the in vivo study indicated that polyurethanes exhibited a high degree of short-term intraocular biocompatibility.

CONCLUSIONS

Biodegradable polyurethane films display the proper mechanical properties for an easy transscleral-driven subretinal implantation and can be considered as biocompatible supports for a functional ARPE-19 monolayer.

A tissue-engineered approach towards retinal repair: scaffolds for cell transplantation to the subretinal space

BACKGROUND

Several mechanisms of retina degeneration result in the deterioration of the outer retina and can lead to blindness. Currently, with the exception of anti-angiogenic treatments for wet age-related macular degeneration, there are no treatments that can restore lost vision. There is evidence that photoreceptors and embryonic retinal tissue, transplanted to the subretinal space, can form new synapses with surviving host neurons. However, these transplants have yet to result in a clinical treatment for retinal degeneration.

METHODS

This article reviews the current literature on the transplantation of scaffolds with retinal and retinal pigmented epithelial (RPE) cells to the subretinal space. We discuss the types of cells and materials that have been investigated for transplantation to the subretinal space, summarize the current findings, and present opportunities for future research and the next generation of scaffolds for retinal repair.

RESULTS

Challenges to cell transplantation include limited survival upon implantation and the formation of abnormal cell architectures in vivo. Scaffolds have been shown to enhance cell survival and direct cell differentiation and organization in a number of models of retinal degeneration.

CONCLUSIONS

The transplantation of cells within a scaffold represents a possible treatment to repair retinal degeneration and restore vision in effected patients. Materials have been developed for the delivery of retinal and RPE cells separately however, the development of a combined tissue-engineered scaffold targeting both cell populations represents a promising direction for retinal repair.

Stress response of fibroblasts adherent to the surface of plasma-treated poly(lactic-co-glycolic acid) nanofiber matrices

Recent studies have shown that polymeric scaffolds as a synthetic extracellular matrix (ECM) are essential for regenerating tissues or organs in tissue engineering approaches. Controlling the surface functionality of polymer scaffolds is critical in regulation of cellular responses to the scaffolds during tissue formation. However, the stress response of cells to polymer scaffolds with different surface characteristics is not yet clear. We investigated the expression of heat shock protein (HSP) and Bcl-2 in fibroblasts cultured on electrospun nanofiber matrices with different surface characteristics. The hydrophilicity and chemical composition of electrospun poly(lactic-co-glycolic acid) (PLGA) nanofibers was regulated by plasma treatment in the presence of ammonia gas. We found that expression levels of HSP and Bcl-2 in fibroblasts were strongly dependent on the surface hydrophilicity and concentration of nitrogen-containing functional groups on the nanofiber matrices. The controlled hydrophilicity and surface chemical composition of nanofiber matrices enhanced adhesion and spreading of cells on the matrices, resulting in reduction of cellular stress. This approach to controlling the surface properties and regulating expression of a stress gene could be useful in the design of synthetic ECMs for many tissue engineering applications.

Engineering retina from human retinal progenitors (cell lines)

Retinal degeneration resulting in the loss of photoreceptors is the leading cause of blindness. Several therapeutic protocols are under consideration for treatment of this disease. Tissue replacement is one such strategy currently being explored. However, availability of tissues for transplant poses a major obstacle. Another strategy with great potential is the use of adult stem cells, which could be expanded in culture and then utilized to engineer retinal tissue. In this study, we have explored a spontaneously immortalized human retinal progenitor cell line for its potential in retinal engineering using rotary cultures to generate three-dimensional (3D) structures. Retinal progenitors cultured alone or cocultured with retinal pigment epithelial cells form aggregates. The aggregate size increases between days 1 and 10. The cells grown as a 3D culture rotary system, which promotes cell-cell interaction, retain a spectrum of differentiation capability. Photoreceptor differentiation in these cultures is confirmed by significant upregulation of rhodopsin and AaNat, an enzyme implicated in melatonin synthesis (immunohistochemistry and Western blot analysis). Photoreceptor induction and differentiation is further attested to by the upregulation of rod transcription factor Nrl, Nr(2)e(3), expression of interstitial retinal binding protein, and rhodopsin kinase by reverse transcription-polymerase chain reaction. Differentiation toward other cell lineages is confirmed by the expression of tyrosine hydroxylase in amacrine cells, thy 1.1 expression in ganglion cells and calbindin, and GNB3 expression in cone cells. The capability of retinal progenitors to give rise to several retinal cell types when grown as aggregated cells in rotary culture offers hope that progenitor stem cells under appropriate culture conditions will be valuable to engineer retinal constructs, which could be further tested for their transplant potential. The fidelity with which this multipotential cell line retains its capacity to differentiate into multiple cell types holds great promise for the use of tissue-specific adult stem cells for therapy.