Structural evolution of sol-gel-derived hydroxyapatite

Synthesis of pure and doped nano-calcium phosphates using different conventional methods for biomedical applications: a review

The applications of calcium phosphates (hydroxyapatite, tetracalcium phosphate, tricalcium phosphate (alpha and beta), fluorapatite, di-calcium phosphate anhydrous, and amorphous calcium-phosphate) are increasing day by day. Calcium hydroxyapatite, commonly known as hydroxyapatite (HAp), represents a mineral form of calcium apatite. Owing to its close molecular resemblance to the mineral constituents of bones, teeth, and hard tissues, HAp is often employed in the biomedical domain. In addition, it is extensively employed in various sectors such as the remediation of water, air, and soil pollution. The key advantage of HAp lies in its potential to accommodate a wide variety of anionic and cationic substitutions. Nevertheless, HAp and tricalcium phosphate (TCP) syntheses typically involve the use of chemical precursors containing calcium and phosphorus sources and employ diverse techniques, such as solid-state, wet, and thermal methods or a combination of these processes. Researchers are increasingly favoring natural sources such as bio-waste (eggshells, oyster shells, animal bones, fish scales, etc.) as viable options for synthesizing HAp. Interestingly, the synthesis route significantly influences the morphology, size, and crystalline phase of calcium phosphates. In this review paper, we highlight both dry and wet methods, which include six commonly used synthesis methods (i.e. solid-state, mechano-chemical, wet-chemical precipitation, hydrolysis, sol-gel, and hydrothermal methods) coupled with the variation in source materials and their influence in modifying the structural morphology from a bulky state to nanoscale to explore the applications of multifunctional calcium phosphates in different formats.

A study on mechanical and tribological properties of eco-friendly synthesized ZrO2-doped borosilicate glasses

The research article aims to investigate the mechanical and tribological characteristics of bioactive glass specimens comprising 31B2O3-20SiO2-24.5Na2O-(24.5-x) CaO and xZrO2 (mol%). This glass system was partially derived from bio-waste, with varying concentrations of Zirconia (ZrO2) represented x (x = 0, 1, 3, and 5). The specimens were fabricated using the traditional melt-quench method. Mechanical studies like hardness and compressive strength were measured using Vickers hardness tester and universal tensile machine respectively, while a pin-on-disk tribometer was used to analyze the tribological characteristics. All the specimens were soaked in SBF for a week to assess in-vitro bioactivity. The research findings indicate that Zirconia inclusion resulted in a significant reduction in the intensity of hydroxyapatite peaks of FTIR and XRD spectra, suggesting a decrease in bioactivity. However, it concurrently resulted in increased glass hardness, with the highest value (∼7.55 GPa) observed in the BSG-5 glass sample. Similarly, compressive strength results demonstrated maximum strength in BSG-5 glass specimen, with a value of approximately ∼132 MPa. Moreover, the tribological properties of the glass system were enhanced, evident from the reduced coefficient of friction and specific wear rate. Notably, the BSG-5 glass specimen exhibited the least wear coefficient of 0.018 mm3/N-m at a track radius of 40 mm and a load of 15N. These findings were further supported by SEM images of the worn-out ZrO2-Doped Borosilicate Glass surface. Overall, the results suggest that the addition of Zirconia to borosilicate glass holds promise for improving its mechanical and tribological characteristics. However, this enhancement comes at the expense of its bioactivity. Consequently, the modified glass system presents a cost effective viable option for various applications, particularly in load-bearing and dental applications.

A study on the extraction of chitin and chitosan from the invasive sea urchin Diadema setosum from Iskenderun Bay in the Northeastern Mediterranean

This work presents, for the first time, the extraction and characterization of chitin and chitosan from the testa (T) and spines (S) of the invasive sea urchin (Diadema setosum) from the İskenderun Bay in the Northeastern Mediterranean. Testa chitin (T-CT), spine chitin (S-CT), testa chitosan (T-CS), and spine chitosan (S-CS) were isolated following demineralization, deproteinization (chitin), and deacetylation (chitosan). The yield of chitin extraction from dry sea urchin testa (T-CT) and spines (S-CT) were 57.2 ± 1.43% and 67.1 ± 0.17%, respectively. The yield of chitosan produced from extracted testa (T-CS) and spines (S-CS) chitin were 87.3 ± 1.82% and 74.04 ± 1.27%, respectively. Degree of deacetylation (DD%) value were calculated using FT-IR (84.19% and 85.80%), resulting in a high DD. They were perfectly soluble in acidic solution. We also characterized the isolated chitin (T-CT and S-CT) and chitosan (T-CS and S-CS) by determining its physicochemical properties using X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscope analysis (SEM). Overall, the results indicated that the preparation of chitin and chitosan from the invasive sea urchin testa and spines could open the opportunity for the value-added seafood waste to be utilized in a wide range of practical applications such as medicine, pharmaceutical, and biotechnology.

Engineered nanostructures within sol-gel bioactive glass for enhanced bioactivity and modulated drug delivery

The engineering of nanocrystalline phase in amorphous oxide materials such as bioactive glass is emerging as a new area of great technological and scientific interest in the field of biomaterials. This study reports for the first time the infusion of apatite nanocrystals in sol-gel-derived bioactive glass using P123 as the structure-directing agent. The synthesis of a multicomponent 80SiO₂-15CaO-5P₂O₅ bioactive glass material having a hierarchically ordered mesoporous structure with uniformly grown nanocrystals of apatite was achieved through a sono-assisted surfactant-templated sol-gel method. The bulk crystallographic analysis together with microstructural characterizations shows that the nanocrystalline apatite domains are uniformly dispersed as well as embedded along the mesopores. These nanocrystalline domains were found to influence the textural properties. In addition, macroscopic evidence for higher signs of bonelike matrix formation was observed by the biomineralization study in simulated body fluids. Osteostimulatory effects of these glass samples were evident by cultures in a osteogenic and non-osteogenic mediums with human osteosarcoma cells and a higher osteopromotive potential was authenticated by the alkaline phosphatase activity and alizarin red staining. Further, this study shows a new strategy to prolong the drug release period on account of the nanocrystalline phase and hierarchically positioned mesopores, thus making it a better drug delivery matrix as well.

An overview of synthesis, characterization, applications and associated adverse effects of bioactive nanoparticles

A particle with a diameter ranging from 1 to 100 nm is considered a nanoparticle (NP). Owing to their small size and high surface area, NPs possess unique physical, chemical and biological properties as compared to their bulkier counterparts. This paper describes various physico-chemical as well as green methods that can be used to synthesize different types of NPs including carbon-based, ceramic, metal, semiconductor, polymeric and lipid-based NPs. These methods can be categorized into either top-down or bottom-up approaches. Electron microscopy, atomic force microscopy, dynamic light scattering, X-ray diffraction, zeta-potential instrument, liquid chromatography-mass spectrometry, fourier transform infrared spectroscopy and thermogravimetric analysis are the techniques discussed in the characterization of NPs. This review provides an insight into the extraordinary properties of NPs that have opened the doors for endless biomedical applications like drug delivery, photo-ablation therapy, biosensors, bio-imaging and hyperthermia. In addition, NPs are also involved in improving crop growth, making protective clothing, cosmetics and energy reserves. This review also specifies adverse health effects associated with NPs such as hepatotoxicity, genotoxicity, neurotoxicity, etc., and inhibitory effects on plant growth and aquatic life. Further, in-vitro toxicity assessment assays for cell proliferation, apoptosis, necrosis and oxidative stress, as well as in-vivo toxicity assessment like biodistribution, clearance, hematological, serological and histological studies, are discussed here. Lastly, the authors have mentioned various measures that can be adopted to minimize the toxicity associated with NPs such as green synthesis, use of stabilizers, gene gun, polymer shell, microneedle capsule, etc.

Biomineralization of bone tissue: calcium phosphate-based inorganics in collagen fibrillar organic matrices

Background

Bone regeneration research is currently ongoing in the scientific community. Materials approved for clinical use, and applied to patients, have been developed and produced. However, rather than directly affecting bone regeneration, these materials support bone induction, which regenerates bone. Therefore, the research community is still researching bone tissue regeneration. In the papers published so far, it is hard to find an improvement in the theory of bone regeneration. This review discusses the relationship between the existing theories on hard tissue growth and regeneration and the biomaterials developed so far for this purpose and future research directions.

Mainbody

Highly complex nucleation and crystallization in hard tissue involves the coordinated action of ions and/or molecules that can produce different organic and inorganic composite biomaterials. In addition, the healing of bone defects is also affected by the dynamic conditions of ions and nutrients in the bone regeneration process. Inorganics in the human body, especially calcium- and/or phosphorus-based materials, play an important role in hard tissues. Inorganic crystal growth is important for treating or remodeling the bone matrix. Biomaterials used in bone tissue regeneration require expertise in various fields of the scientific community. Chemical knowledge is indispensable for interpreting the relationship between biological factors and their formation. In addition, sources of energy for the nucleation and crystallization processes of such chemical bonds and minerals that make up the bone tissue must be considered. However, the exact mechanism for this process has not yet been elucidated. Therefore, a convergence of broader scientific fields such as chemistry, materials, and biology is urgently needed to induce a distinct bone tissue regeneration mechanism.

Conclusion

This review provides an overview of calcium- and/or phosphorus-based inorganic properties and processes combined with organics that can be regarded as matrices of these minerals, namely collagen molecules and collagen fibrils. Furthermore, we discuss how this strategy can be applied to future bone tissue regenerative medicine in combination with other academic perspectives.

Role of nanostructured materials in hard tissue engineering

The rise in the use of biomaterials in bone regeneration in the last decade has exponentially multiplied the number of publications, methods, and approaches to improve and optimize their functionalities and applications. In particular, biomimetic strategies based on the self-assembly of molecules to design, create and characterize nanostructured materials have played a very relevant role. We address this idea on four different but related points: self-setting bone cements based on calcium phosphate, as stable tissue support and regeneration induction; metallic prosthesis coatings for cell adhesion optimization and prevention of inflammatory response exacerbation; bio-adhesive hybrid materials as multiple drug delivery localized platforms and finally bio-inks. The effect of the physical, chemical, and biological properties of the newest biomedical devices on their bone tissue regenerative capacity are summarized, described, and analyzed in detail. The roles of experimental conditions, characterization methods and synthesis routes are emphasized. Finally, the future opportunities and challenges of nanostructured biomaterials with their advantages and shortcomings are proposed in order to forecast the future directions of this field of research.

Recrystallization of Triple Superphosphate Produced from Oyster Shell Waste for Agronomic Performance and Environmental Issues

Calcium dihydrogen phosphate monohydrate (Ca(H2PO4)2·H2O) (a fertilizer) was successfully synthesized through a recrystallization process using prepared triple superphosphate (TSP) derived from oyster shell waste as the starting material. This bio-green, eco-friendly process to produce an important fertilizer can promote a sustainable society. The shell-waste-derived TSP was dissolved in distilled water and kept at 30, 50, and 80 °C. Non-soluble powder and TSP solution were obtained. The TSP solution fractions were then dried, and the recrystallized products (RCP30, RCP50, and RCP80) were obtained and confirmed as Ca(H2PO4)2·H2O. Conversely, the non-soluble products (NSP30, NSP50, and NSP80) were observed as calcium hydrogen phosphate dihydrate (CaHPO4·2H2O). The recrystallized yields of RCP30, RCP50, and RCP80 were found to be 51.0%, 49.6%, and 46.3%, whereas the soluble percentages were 98.72%, 99.16%, and 96.63%, respectively. RCP30 shows different morphological plate sizes, while RCP50 and RCP80 present the coagulate crystal plates. X-ray diffractograms confirmed the formation of both the NSP and RCP. The infrared adsorption spectra confirmed the vibrational characteristics of HPO42−, H2PO4−, and H2O existed in CaHPO4·2H2O and Ca(H2PO4)2·H2O. Three thermal dehydration steps of Ca(H2PO4)2·H2O (physisorbed water, polycondensation, and re-polycondensation) were observed. Ca(H2PO4)2 and CaH2P2O7 are the thermodecomposed products from the first and second steps, whereas the final product is CaP2O6.

Comparison of the Morphological and Structural Characteristic of Bioresorbable and Biocompatible Hydroxyapatite-Loaded Biopolymer Composites

Calcium phosphate (CaP)-based ceramic–biopolymer composites can be regarded as innovative bioresorbable coatings for load-bearing implants that can promote the osseointegration process. The carbonated hydroxyapatite (cHAp) phase is the most suitable CaP form, since it has the highest similarity to the mineral phase in human bones. In this paper, we investigated the effect of wet chemical preparation parameters on the formation of different CaP phases and compared their morphological and structural characteristics. The results revealed that the shape and crystallinity of CaP particles were strongly dependent on the post-treatment methods, such as heat or alkaline treatment of as-precipitated powders. In the next step, the optimised cHAp particles have been embedded into two types of biopolymers, such as polyvinyl pyrrolidone (PVP) and cellulose acetate (CA). The pure polymer fibres and the cHAp–biopolymer composites were produced using a novel electrospinning technique. The SEM images showed the differences between the morphology and network of CA and PVP fibres as well as proved the successful attachment of cHAp particles. In both cases, the fibres were partially covered with cHAp clusters. The SEM measurements on samples after one week of immersion in PBS solution evidenced the biodegradability of the cHAp–biopolymer composites.

Conversion of Bivalve Shells to Monocalcium and Tricalcium Phosphates: An Approach to Recycle Seafood Wastes

The search for sustainable resources remains a subject of global interest and the conversion of the abundantly available bivalve shell wastes to advanced materials is an intriguing method. By grinding, calcium carbonate (CaCO₃) powder was obtained from each shell of bivalves (cockle, mussel, and oyster) as revealed by FTIR and XRD results. Each individual shell powder was reacted with H₃PO₄ and H₂O to prepare Ca(H₂PO₄)₂·H₂O giving an anorthic crystal structure. The calcination of the mixture of each shell powder and its produced Ca(H₂PO₄)₂·H₂O, at 900 °C for 3 h, resulted in rhombohedral crystal β-Ca₃(PO₄)₂ powder. The FTIR and XRD data of the CaCO₃, Ca(H₂PO₄)₂·H₂O, and Ca₃(PO₄)₂ prepared from each shell powder are quite similar, showing no impurities. The thermal behaviors of CaCO₃ and Ca(H₂PO₄)₂·H₂O produced from each shell were slightly different. However, particle sizes and morphologies of the same products obtained from different shells were slightly different-but those are significantly different for the kind of the obtained products. Overall, the products (CaCO₃, Ca(H₂PO₄)₂·H₂O, and Ca₃(PO₄)₂) were obtained from the bivalve shell wastes by a rapidly simple, environmentally benign, and low-cost approach, which shows huge potential in many industries providing both economic and ecological benefits.

Advanced Materials Based on Nanosized Hydroxyapatite

The development of new materials based on hydroxyapatite has undergone a great evolution in recent decades due to technological advances and development of computational techniques. The focus of this review is the various attempts to improve new hydroxyapatite-based materials. First, we comment on the most used processing routes, highlighting their advantages and disadvantages. We will now focus on other routes, less common due to their specificity and/or recent development. We also include a block dedicated to the impact of computational techniques in the development of these new systems, including: QSAR, DFT, Finite Elements of Machine Learning. In the following part we focus on the most innovative applications of these materials, ranging from medicine to new disciplines such as catalysis, environment, filtration, or energy. The review concludes with an outlook for possible new research directions.

A cost effective SiO2-CaO-Na2O bio-glass derived from bio-waste resources for biomedical applications

The present paper describes the in vitro bioactivity, cytocompatibility and degradation performance of SiO₂-CaO-Na₂O bio-glass synthesized using bio-waste. Egg shells and rice husk ash (RHA) bio-wastes were used as sources of calcium oxide (CaO) and silica (SiO₂), respectively. Glass samples were obtained by melt-quenching technique. Bioactivity was studied using in vitro experiments in simulated body fluid (SBF), degradation behaviour was evaluated in Tris-HCl buffer solutions recommended by ISO 10993-14 standards and cytocompatibility was estimated using MTT assay. The formation of hydroxyapatite was characterized by XRD, FTIR and SEM-EDS after soaking the glass samples in SBF solution. XRD confirmed the phase of hydroxyapatite with its standard JCPDS data. FTIR analyses revealed the occurrence of distinctive functional groups related to hydroxyapatite. Surface micrographs showed the agglomerated globular shape morphology of hydroxyapatite, while EDS analysis confirmed the existence of biological elements of apatite such as Ca, P and O. Degradation study results showed that the glass thus prepared has considerable controlled degradation rate. MTT assay revealed the cytocompatibility nature for different dosages (1000-50 μg/mL) of the prepared glass with MG-63 cells. These results perfectly established that egg shells and RHA are potentially beneficial resources for the production of bio-glasses.

Physicochemical Properties of Oxalic Acid-Modified Chitosan/Neem Leave Composites from Pessu River Crab Shell

This study was aimed to evaluate the characteristics of chitosan from Pessu river crab shell and its derivatives as prospective adsorbent. The synthesized chitosan (CH) was modified with 10 % (w/v) oxalic acid (CHOx), while the composites (CHOx-ANL1, CHOx-ANL2 and CHOx-ANL3) were designated according to the amount of activated neem leave (ANL). The materials were characterized by Fourier transform infrared (FTIR), energy-dispersive X-ray (EDAX), X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), thermal gravimetric (TGA) and methylene blue dye adsorption. The FTIR spectra of chitosan samples show the characteristics of primary and secondary amine/amide groups. The SEM images exhibit a tight, porous and fractured surface, which is covered with activated neem leave for the composites. The BET surface area of chitosan materials is in the increasing order of, CH < CHOx-ANL1 < CHOx-ANL2 < CHOx < CHOx-ANL3. CHOx-ANL3 displays a higher surface area of 389 m2/g, and 70.9 % mesoporosity. Despite its lower surface area of 258 m2/g (65.4 % mesoporosity), CHOx-ANL1 exhibits a greater methylene blue adsorption of 90.8 mg/g at dye concentration of 300 mg/L. The possible removal mechanisms include ionic interaction between dye molecules and functional groups, and surface adsorption due to the textural properties of chitosan samples. Chitosan from Pessu river crab shell and its derivatives are promising adsorbent candidate for dyes and heavy metals removal from water.

Template-assisted, Sol-gel Fabrication of Biocompatible, Hierarchically Porous Hydroxyapatite Scaffolds

Hierarchically porous hydroxyapatite (HHA) scaffolds were synthesized by template-assisted sol-gel chemistry. Polyurethane foam and a block copolymer were used as templates for inducing hierarchically porous structures. The HHA scaffolds exhibited open porous structures with large pores of 400-600 µm and nanoscale pores of ~75 nm. In comparison with conventional hydroxyapatite (CHA), HHA scaffolds exhibited significantly higher surface areas and increased protein adsorption for bovine serum albumin and vitronectin. Both the HHA and CHA scaffolds exhibited well in vitro biocompatibility. After 1 day, Saos-2 osteoblast-like cells bound equally well to both HHA and CHA scaffolds, but after 7 days in culture, cell proliferation was significantly greater on the HHA scaffolds (p < 0.01). High surface area and hierarchical porous structure contributed to the selective enhancement of osteoblast proliferation on the HHA scaffolds.

Large-scale and fast synthesis of nano-hydroxyapatite powder by a microwave-hydrothermal method

A microwave-hydrothermal (M-H) method assisted with ultrasonic atomization precipitation was developed for large-scale and fast synthesis of nano-hydroxyapatite (nano-HAP) powder. This technology combines the uniform mixing effect of ultrasonic atomization precipitation at high concentration with the rapid and uniform heating effect of the M-H method, aiming to obtain a high quality product with low agglomeration, homogeneous size distribution, accurate stoichiometry, and high purity while improving the yield. The influences of reaction temperature, reaction time and reactant concentration on the formation of nano-HAP were investigated. The results show that the crystallinity increases significantly and the diameter of nano-HAP increases to some extent, but the length does not change obviously while the reaction temperature increase from 60 °C to 160 °C and the reaction time increases from 1 minute to 40 minutes respectively. The crystallinity, dispersion and crystal size of nano-HAP do not change obviously while the concentration of Na₂HPO₄·12H₂O increases from 0.06 mol L⁻¹ to 0.4 mol L⁻¹. When the reaction temperature is 160 °C, the reaction time is 40 min, and the concentration of Na₂HPO₄·12H₂O is 0.4 mol L⁻¹, the yield of nano-HAP powder achieved a maximum yield (0.033 kg L⁻¹). The obtained nano-HAP powder exhibits a uniform size and good dispersibility, with a size of 87.62 ± 22.44 nm and crystallinity of 0.92, respectively. This study indicates that the M-H method assisted with ultrasonic atomization precipitation is a facile one-pot method for the rapid and large-scale synthesis of highly crystalline, dispersible nano-HAP particles.

The obtained nano-HAP still has high crystallinity, uniform size and good dispersibility when the concentration of Na₂HPO₄ is 0.4 mol L⁻¹.

Application of hydroxyapatite and its modified forms as adsorbents for water defluoridation: an insight into process synthesis

Fluorosis is a major scourge in many countries caused by prolonged consumption of drinking water with high fluoride content found in groundwater resources. Hydroxyapatite (Hap) and its composite forms are excellent biomaterials that recently gained attention as efficient adsorbents, owing to its physical and chemical nature as it can substitute both cationic and anionic complexes present in an aqueous solution in its atomic arrangement. Its biological nature, biocompatibility and biodegradability along with its chemical characteristics such as crystallinity, stability, ion adsorption capability and highly specific catalytic activity make it suitable for a variety of applications especially in water treatment for fluoride removal. This review describes various techniques for synthesis of a wide variety of biogenic, synthetic, composite and modified forms of Hap for application in water defluoridation. Hap derived from natural sources or synthesized using conventional methods, hydrothermal, sol-gel or advanced sonication-cum-precipitation technique varied in terms of its crystallinity, structure, size, etc., which affect the fluoride removal capacity. The advantage and disadvantages of various synthesis methods, process parameters and product characteristics have been compiled, which may help to identify a suitable synthesis method for a desired Hap product for potential application and future perspectives in water treatment.

Synthesis, Characterization, and in Vitro Biological Evaluation of Copper-Containing Magnetic Bioactive Glasses for Hyperthermia in Bone Defect Treatment

Hyperthermia treatment induced by magnetic mesoporous glasses has been applied as a potential therapeutic approach for bone defects due to malignant tumors. The objective of this study was to synthesize and characterize the structural and biological properties of magnetic bioactive glasses (BGs) for producing multifunctional materials. The effect of the addition of copper (Cu) to the bioactive glass composition was also evaluated. Fe BG and FeCu BG as magnetic mesoporous BGs, and Cu BG as mesoporous BG were synthesized and dried by template sol-gel method. Then the synthesized bioglasses were characterized and analyzed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive electron disperse spectroscopy (EDS), Brunauer-Emmett-Teller (BET), and vibrating sample magnetometer (VSM). In addition, the antibacterial behavior, cytotoxicity assay (MTT test), proliferation assay of HUVEC cell assay, and bioactivity (ALP activity test) of the synthesized BGs were evaluated. The characterization results exhibited that the synthesized powders formed mesoporous glasses with nanoparticle morphology, good surface area, and magnetic properties. The synthesized BGs also demonstrated suitable biological behavior. The magnetic saturation of bioactive glasses was increased by the addition of copper oxide. A two-phase structure was observed for the magnetic glasses compared to the copper-containing glasses, thus making them suitable for drug delivery systems. The antibacterial behavior was found to be better for the Cu BG and Fe BG compared to the FeCu BG. However, the least amount of cytotoxicity was observed for the Fe BG and FeCu BG, compared to the Cu BG. In addition, the Fe-containing BGs compared with the control group showed a lack of HUVEC cell proliferation and angiogenesis motivation. From the ALP assay, higher bioactivity for the magnetic bioglasses in the presence of mesenchymal cells was found. From the results of this in vitro study, the Cu-containing magnetic bioglass (FeCu BG) could be considered as a new generation of magnetic glasses for inducing hyperthermia in treatment of bone defects due to malignant tumors. However, further in vitro and in vivo studies are required to confirm their applications in healing of bone defects and tissue engineering.

Physicochemical properties and characterization of chitosan synthesized from fish scales, crab and shrimp shells

Chitosan is derived from different starting materials such as fish scales, shrimp and crab shells by the process of deacetylation of chitin, which is carried out using 40% KOH at 90°C for 6h. Prepared chitosan was characterized by Fourier transforms infrared spectroscopy, X-ray powder diffraction, Scanning electron microscope and Thermogravimetric analysis. Futher the physicochemical properties of chitosan like Fat binding capacity (FBC), water binding capacity (WBC), solubility, average molecular weight, ash content, moisture and degree of deacetylation of chitosan were also studied. Crystalline index (%) values of commercial, shrimp, crab and fish chitosan were found to be 96, 82, 88 and 84% respectively. The presence of amino group was confirmed from the FTIR spectra of chitosan synthesized. TGA results demonstrated the lower thermal stability of chitosan. Relatively smother surface and nano-fiber structures were observed from SEM analysis. The degree of deacetylation of chitosan from different sources such as shells of fish, shrimp and crab were found to be 75%, 78%, and 70% respectively. In a similar way the WBC and FBC of fish, shrimp and crab shells were found to be 492, 358 and 138% and 226, 246 and 138% respectively.

Structural transformation of synthetic hydroxyapatite under simulated in vivo conditions studied with ATR-FTIR spectroscopic imaging

Hydroxyapatite and carbonate-substituted hydroxyapatite are widely used in bone tissue engineering and regenerative medicine. Both apatite materials were embedded into recently developed ceramic/polymer composites, subjected to Simulated Body Fluid (SBF) for 30days and characterized using ATR-FTIR spectroscopic imaging to assess their behaviour and structures. The specific aim was to detect the transition phases between both types of hydroxyapatite during the test and to analyze the surface modification caused by SBF. ATR-FTIR spectroscopic imaging was successfully applied to characterise changes in the hydroxyapatite lattice due to the elastic properties of the scaffolds. It was observed that SBF treatment caused a replacement of phosphates in the lattice of non-substituted hydroxyapatite by carbonate ions. A detailed study excluded the formation of pure A type carbonate apatite. In turn, CO₃^2- content in synthetic carbonate-substituted hydroxyapatite decreased. The usefulness of ATR-FTIR spectroscopic imaging studies in the evaluation of elastic and porous β-glucan hydroxyapatite composites has been demonstrated.

Ln3+-doped hydroxyapatite nanocrystals: controllable synthesis and cell imaging

A series of novel HAp:Ln³⁺ (Ln = Eu or Tb) nanocrystals with tunable aspect ratios were prepared via facile hydrothermal synthetic routes and utilized for biological imaging applications.

Hydroxyapatite nanocrystals: colloidal chemistry, assembly and their biological applications

In this review, recent advances in the tunable synthesis, ion doping, assembly and applications of monodisperse HAp nanocrystals are summarized.

Synthesis methods for nanosized hydroxyapatite with diverse structures

Hydroxyapatite (HAp) is the major mineral constituent of vertebrate bones and teeth. It has been well documented that HAp nanoparticles can significantly increase the biocompatibility and bioactivity of man-made biomaterials. Over the past decade, HAp nanoparticles have therefore increasingly been in demand, and extensive efforts have been devoted to develop many synthetic routes, involving both scientifically and economically new features. Several investigations have also been made to determine how critical properties of HAp can be effectively controlled by varying the processing parameters. With such a wide variety of methods for the preparation of HAp nanoparticles, choosing a specific procedure to synthesize a well-defined powder can be laborious; accordingly, in the present review, we have summarized all the available information on the preparation methodologies of HAp, and highlighted the inherent advantages and disadvantages involved in each method. This article is focused on nanosized HAp, although recent articles on microsized particles, especially those assembled from nanoparticles and/or nanocrystals, have also been reviewed for comparison. We have also provided several scientific figures and discussed a number of critical issues and challenges which require further research and development.

RGD-bearing peptide-amphiphile-hydroxyapatite nanocomposite bone scaffold: an in vitro study

In this study, a fibrous nanocomposite scaffold was developed by combining hydroxyapatite (HA) fibers produced by electrospinning method and arginine-glycine-aspartic acid (RGD)-bearing peptide-amphiphile (PA) gel (PA-RGD) produced by self-assembly and gelation induced by calcium ions. Scanning electron microscope, transmission electron microscope and atomic force microscopy imaging confirmed the successful production of inorganic and organic components of this nanocomposite material. Within the HA, the presence of a CaCO3 phase, improving biodegradation, was shown by x-ray diffraction analysis. The in vitro effectiveness of the PA-RGD/HA scaffold was determined on MC3T3-E1 preosteoblast cultures in comparison with HA matrix and PA-RGD gel. The highest cellular proliferation was obtained on PA-RGD gel, however, alkaline phosphatase activity results denoted that osteogenic differentiation of the cells is more favorable on HA containing matrices with respect to PA-RGD itself. Microscopic observations revealed that all three matrices support cell attachment and proliferation. Moreover, cells form bridges between the HA and PA-RGD components of the nanocomposite scaffold, indicating the integrity of the biphasic components. According to the real time-polymerase chain reaction (RT-PCR) analyses, MC3T3-E1 cells expressed significantly higher osteocalcin on all matrices. Bone sialoprotein (BSP) expression level is ten-fold higher on PA-RGD/HA nanocomposite scaffolds than that of HA and PA-RGD scaffolds and the elevated expression of BSP on PA-RGD/HA nanocomposite scaffolds suggested higher mineralized matrix on this novel scaffold. Based on the results obtained in this study, the combination of HA nanofibers and PA-RGD gel takes advantage of good structural integrity during the cell culture, besides the osteoinductive and osteoconductive properties of the nanofibrous scaffold.

Obtaining Ca(H2PO4)(2)·H2O, monocalcium phosphate monohydrate, via monetite from brushite by using sonication

Brushite was synthesized by precipitation of calcium chloride (CaCl(2)) and sodium phosphate monobasic (Na(2)HPO(4)) dried in vacuum and monetite was obtained from this brushite by sonication with a frequency of 90kHz at 500W for 90min. Monetite itself was also transformed in Ca(H(2)PO(4))(2)·H(2)O, monocalcium phosphate monohydrate (MCPM), by sonication with a frequency of 90kHz at 500W for 60min followed by lyophilization. The MCPM was sonicated and lyophilized by three times more until reach over 240min, but any other phase transformation was observed. All these phase transformations were analyzed by X-ray diffraction (XRD) and infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated a grain size of about 200nm in all the samples. The morphology observed was a corn-flake-like grain for brushite, a pseudo-needle-like grains for monetite, and lamellar-like grains for MCPM.

Ultrafast synthesis and characterization of carbonated hydroxyapatite nanopowders via sonochemistry-assisted microwave process

Herein, carbonated hydroxyapatite (CHAp) nanopowders were synthesized via sonochemistry-assisted microwave process. The influences of microwave and ultrasonic irradiation on the crystallinity, morphology, yield, Ca/P molar ratio, specific surface area and dispersibility were investigated and compared with the conventional precipitation method. The results showed that sonochemistry-assisted microwave process significantly increased the synthetic efficiency. The well-crystallized nanopowders could be obtained at high yield of 98.8% in ultra-short-period of 5min. In addition, the crystallization process was promoted with the increase of ultrasonic and microwave power and the reaction time during the sonochemistry-assisted microwave process. The sonochemistry assistance also remarkably increased the specific surface area and dispersibility of the as-obtained products. These results suggest that the sonochemistry-assisted microwave process is an effective approach to synthesize CHAp with high efficiency.

The properties of sintered calcium phosphate with [Ca]/[P] = 1.50

In order to obtain the properties of the sintered as-dried calcium phosphate with [Ca]/[P] = 1.50, the characteristics of sintered pellets have been investigated using X-ray diffraction (XRD), inductively coupled plasma-mass spectrometry (ICP-MS), Fourier-transform infrared (FT-IR) spectra, Vickers hardness indentation and scanning electron microscopy (SEM). When the pellet samples were sintered between 700 °C and 1200 °C for 4 h, the hydroxyapatite (Ca(10)(PO(4))(6)(OH)(2), HA) still maintained the major phase, accompanied with the rhenanite (NaCaPO(4)) as the secondary phase and β-tricalcium phosphate (β-Ca(3)(PO(4))(2), β-TCP) as the minor phases. In addition, the HA partially transformed to α-tricalcium phosphate (α-Ca(3)(PO(4))(2), α-TCP) and tetracalcium phosphate (Ca(4)(PO4)(2)O, TTCP), when the pellet samples were sintered at 1300 °C and 1400 °C, respectively, for 4 h. The maximum density and Vickers Hardness (HV) of sintered pellet samples were 2.85 g/cm3 (90.18% theoretical density (T.D.)) and 407, which appeared at 1200 °C and 900 °C, respectively.

Preparation of low-crystalline apatite nanoparticles and their coating onto quartz substrates

We prepared low-crystalline apatite nanoparticles and coated them onto a surface of a Au/Cr-plated quartz substrate by the electrophoretic deposition (EPD) method or by using a self-assembled monolayer of 11-mercaptoundecanoic acid (SAM method). Low-crystalline apatite nanoparticles around 10 nm in size with extremely low contents of undesirable residual products were obtained by adding (NH(4))(2)HPO(4) aqueous droplets into a modified synthetic body fluid solution that contained Ca(CH(3)COO)(2). The apatite nanoparticles were successfully coated by either the EPD method or the SAM method; the nanoparticle coating achieved by the SAM method was more uniform than that achieved by the EPD method. The present SAM method is expected to be a promising technique for obtaining a quartz substrate coated with apatite nanoparticles, which can be used as a quartz crystal microbalance device.

Design of injectable organic-inorganic hybrid for bone tissue repair

Injectable bone substitutes are rapidly gained success in tissue engineering applications for their less invasive surgical aspect. Here, the design and the characterization of a novel degradable paste of PCL reinforced with nanocrystals of hydroxyapatite have been presented aiming to mimic natural tissue. Nanohydroxyapatite has been successfully synthesized via sol-gel technique. Dynamic and steady state viscoelastic properties of the solutions and paste were investigated to control the kinetic of phase transition. Correspondingly, the morphology and composition were characterized via TEM, EDAX, and thermal analysis. Injection test underlines the completely ability of the paste of being injected without altering its features. Preliminary biological study showed that the composite paste is not cytotoxic. The synergistic rheological and biological properties, combined with the positive effect of chemical synthesis method indicate that the composite paste is very suitable as local bone substitute in low-load areas.