Formation of cartilage matrix proteins by BMP-transfected murine mesenchymal stem cells encapsulated in a novel class of alginates

Synergistic interaction of hTGF-β3 with hBMP-6 promotes articular cartilage formation in chitosan scaffolds with hADSCs: implications for regenerative medicine

Background

Human TGF-β₃ has been used in many studies to induce genes coding for typical cartilage matrix components and accelerate chondrogenic differentiation, making it the standard constituent in most cultivation media used for the assessment of chondrogenesis associated with various stem cell types on carrier matrices. However, in vivo data suggests that TGF-β₃ and its other isoforms also induce endochondral and intramembranous osteogenesis in non-primate species to other mammals. Based on previously demonstrated improved articular cartilage induction by a using hTGF-β₃ and hBMP-6 together on hADSC cultures and the interaction of TGF- β with matrix in vivo, the present study investigates the interaction of a chitosan scaffold as polyanionic polysaccharide with both growth factors. The study analyzes the difference between chondrogenic differentiation that leads to stable hyaline cartilage and the endochondral ossification route that ends in hypertrophy by extending the usual panel of investigated gene expression and stringent employment of quantitative PCR.

Results

By assessing the viability, proliferation, matrix formation and gene expression patterns it is shown that hTGF-β₃ + hBMP-6 promotes improved hyaline articular cartilage formation in a chitosan scaffold in which ACAN with Col2A1 and not Col1A1 nor Col10A1 where highly expressed both at a transcriptional and translational level. Inversely, hTGF-β₃ alone tended towards endochondral bone formation showing according protein and gene expression patterns.

Conclusion

These findings demonstrate that clinical therapies should consider using hTGF-β₃ + hBMP-6 in articular cartilage regeneration therapies as the synergistic interaction of these morphogens seems to ensure and maintain proper hyaline articular cartilage matrix formation counteracting degeneration to fibrous tissue or ossification. These effects are produced by interaction of the growth factors with the polysaccharide matrix.

Attenuation of Hypertrophy in Human MSCs via Treatment with a Retinoic Acid Receptor Inverse Agonist

In vitro chondrogenically differentiated mesenchymal stem cells (MSCs) have a tendency to undergo hypertrophy, mirroring the fate of transient “chondrocytes” in the growth plate. As hypertrophy would result in ossification, this fact limits their use in cartilage tissue engineering applications. During limb development, retinoic acid receptor (RAR) signaling exerts an important influence on cell fate of mesenchymal progenitors. While retinoids foster hypertrophy, suppression of RAR signaling seems to be required for chondrogenic differentiation. Therefore, we hypothesized that treatment of chondrogenically differentiating hMSCs with the RAR inverse agonist, BMS204,493 (further named BMS), would attenuate hypertrophy. We induced hypertrophy in chondrogenic precultured MSC pellets by the addition of bone morphogenetic protein 4. Direct activation of the RAR pathway by application of the physiological RAR agonist retinoic acid (RA) further enhanced the hypertrophic phenotype. However, BMS treatment reduced hypertrophic conversion in hMSCs, shown by decreased cell size, number of hypertrophic cells, and collagen type X deposition in histological analyses. BMS effects were dependent on the time point of application and strongest after early treatment during chondrogenic precultivation. The possibility of modifing hypertrophic cartilage via attenuation of RAR signaling by BMS could be helpful in producing stable engineered tissue for cartilage regeneration.

Induction of Articular Chondrogenesis by Chitosan/Hyaluronic-Acid-Based Biomimetic Matrices Using Human Adipose-Derived Stem Cells

Cartilage repair using tissue engineering is the most advanced clinical application in regenerative medicine, yet available solutions remain unsuccessful in reconstructing native cartilage in its proprietary form and function. Previous investigations have suggested that the combination of specific bioactive elements combined with a natural polymer could generate carrier matrices that enhance activities of seeded stem cells and possibly induce the desired matrix formation. The present study sought to clarify this by assessing whether a chitosan-hyaluronic-acid-based biomimetic matrix in conjunction with adipose-derived stem cells could support articular hyaline cartilage formation in relation to a standard chitosan-based construct. By assessing cellular development, matrix formation, and key gene/protein expressions during in vitro cultivation utilizing quantitative gene and immunofluorescent assays, results showed that chitosan with hyaluronic acid provides a suitable environment that supports stem cell differentiation towards cartilage matrix producing chondrocytes. However, on the molecular gene expression level, it has become apparent that, without combinations of morphogens, in the chondrogenic medium, hyaluronic acid with chitosan has a very limited capacity to stimulate and maintain stem cells in an articular chondrogenic state, suggesting that cocktails of various growth factors are one of the key features to regenerate articular cartilage, clinically.

Induction of Osteogenic Differentiation in Human Mesenchymal Stem Cells by Crosstalk with Osteoblasts

Natural bone healing following fractures is initiated by osteoblasts (OBs) and mesenchymal stem cells (MSCs), a cell combination with possible potential in tissue engineering techniques for bony defects. The aim of the study was to investigate MSC/OB-crosstalk, in order to determine optimal cell culture conditions for osteogenic differentiation. Human OBs and MSCs interactions were investigated in an in vitro trans-well co-culture study over a time period of 28 days. Calcification was determined by optical density (OD) at 450 nm and Alizarin red staining. Messenger RNA expression was assessed by quantitative PCR. Osteogenic medium containing 1% fetal bovine serum resulted in superior levels of calcification in MSCs in co-culture with OBs compared to 2% or 5% fetal bovine serum (p<0.05). Comparing MSCs and OBs alone with the MSC/OB co-culture, calcification, as measured by OD 450 nm, increased over time in all groups. The highest values were recorded in the co-culture (p<0.05). Osteogenic differentiation potential showed significant interindividual differences. In order to predict differentiation potential, OD 450 nm measurements and mRNA expression of alkaline phosphatase were correlated with the population doubling rate during the expansion period. For OBs and MSCs, statistically significant associations of proliferation and differentiation potential were found (p<0.001). The addition of transforming growth factor beta resulted in up-regulation of collagen type I and Sp7 mRNA, and down-regulation of alkaline phosphatase mRNA. The results suggest the idea of soluble paracrine factors being secreted by OBs to induce osteogenic differentiation of MSCs.

Stimulation of chondrogenic differentiation of mesenchymal stem cells

The methods for cartilage repair have been studied so far, yet many of them seem to have limitations due to the low regenerative capacity of articular cartilage. Mesenchymal stem cell (MSC) has been suggested as an alternative solution to remedy this challenging problem. MSCs, which have extensive differentiation capacity, can be induced to differentiate into chondrocytes under specific conditions. Particularly, this review focused on the effects of growth factors, cell-to-cell interactions and biomaterials in chondrogenesis of MSCs. Appropriate stimulations through these factors are crucial in differentiation and proliferation of MSCs. However, use of MSCs for cartilage repair has some drawbacks and risks, such as expression of hypertrophy-related genes in MSCs-derived chondrocytes and consequent calcification or cell death. Nevertheless, the clinical application of MSCs is expected in the future with advanced technology.

Stem Cell-assisted Approaches for Cartilage Tissue Engineering

The regeneration of damaged articular cartilage remains challenging due to its poor intrinsic capacity for repair. Tissue engineering of articular cartilage is believed to overcome the current limitations of surgical treatment by offering functional regeneration in the defect region. Selection of proper cell sources and ECM-based scaffolds, and incorporation of growth factors or mechanical stimuli are of primary importance to successfully produce artificial cartilage for tissue repair. When designing materials for cartilage tissue engineering, biodegradability and biocompatibility are the key factors in selecting material candidates, for either synthetic or natural polymers. The unique environment of cartilage makes it suitable to use a hydrogel with high water content in the cross-linked or thermosensitive (injectable) form. Moreover, design of composite scaffolds from two polymers with complementary physicochemical and biological properties has been explored to provide residing chondrocytes with a combination of the merits that each component contributes.

Thyroid hormone-induced hypertrophy in mesenchymal stem cell chondrogenesis is mediated by bone morphogenetic protein-4

Chondrogenic differentiating mesenchymal stem cells (MSCs) express markers of hypertrophic growth plate chondrocytes. As hypertrophic cartilage undergoes ossification, this is a concern for the application of MSCs in articular cartilage tissue engineering. To identify mechanisms that elicit this phenomenon, we used an in vitro hypertrophy model of chondrifying MSCs for differential gene expression analysis and functional experiments with the focus on bone morphogenetic protein (BMP) signaling. Hypertrophy was induced in chondrogenic MSC pellet cultures by transforming growth factor β (TGFβ) and dexamethasone withdrawal and addition of triiodothyronine. Differential gene expression analysis of BMPs and their receptors was performed. Based on these results, the in vitro hypertrophy model was used to investigate the effect of recombinant BMP4 and the BMP inhibitor Noggin. The enhancement of hypertrophy could be shown clearly by an increased cell size, alkaline phosphatase activity, and collagen type X deposition. Upon induction of hypertrophy, BMP4 and the BMP receptor 1B were upregulated. Addition of BMP4 further enhanced hypertrophy in the absence, but not in the presence of TGFβ and dexamethasone. Thyroid hormone induced hypertrophy by upregulation of BMP4 and this induced enhancement of hypertrophy could be blocked by the BMP antagonist Noggin. BMP signaling is an important modulator of the late differentiation stages in MSC chondrogenesis and the thyroid hormone induces this pathway. As cartilage tissue engineering constructs will be exposed to this factor in vivo, this study provides important insight into the biology of MSC-based cartilage. Furthermore, the possibility to engineer hypertrophic cartilage may be helpful for critical bone defect repair.

Microencapsulation of probiotics for gastrointestinal delivery

The administration of probiotic bacteria as nutraceuticals is an area that has rapidly expanded in recent years, with a global market worth $32.6 billion predicted by 2014. Many of the health promoting claims attributed to these bacteria are dependent on the cells being both viable and sufficiently numerous in the intestinal tract. The oral administration of most bacteria results in a large loss of viability associated with passage through the stomach, which is attributed to the high acid and bile salt concentrations present. This loss of viability effectively lowers the efficacy of the administered supplement. The formulation of these probiotics into microcapsules is an emerging method to reduce cell death during GI passage, as well as an opportunity to control release of these cells across the intestinal tract. The majority of this technology is based on the immobilization of bacteria into a polymer matrix, which retains its structure in the stomach before degrading and dissolving in the intestine, unlike the diffusion based unloading of most controlled release devices for small molecules. This review shall provide an overview of progress in this field as well as draw attention to areas where studies have fallen short. This will be followed by a discussion of emerging trends in the field, highlighting key areas in which further research is necessary.

A hydrophobically-modified alginate gel system: utility in the repair of articular cartilage defects

Alginate is a family of natural polysaccharides, widely used in industry and medicine for many applications, with its non toxic nature, gentle sol/gel transition procedure and low cost, alginate inferior biomechanical properties have limited its utility especially in tissue engineering. Additionally, ionically cross-linked alginate hydrogels generally lose most of their initial mechanical and swelling properties within a few hours in physiological solution. In order to overcome these limitations, the referenced alginate was treated by covalent fixation of octadecyl chains onto the polysaccharide backbone by esterification. In semi dilute solution, intermolecular hydrophobic interactions of long alkyl chains result in the formation of physical hydrogels, which can then be reinforced by the addition of calcium chloride. FTIR studies clearly showed the presence of ester bonds at 1612 and 1730 cm(-1) indicating that the alkyl groups are incorporated in the backbone of resulting polymer. The endothermic peak and exothermic peak present in the DSC thermogram of Alg-C18 had shifted to lower temperatures comparing to native alginate (from 106 to 83°C and from 250 to 245°C, respectively) due to the esterification reaction that leads to high hydrophobic nature of the modified sample. From rheological experiments, it can be inferred that the combination of both calcium bridges and intermolecular hydrophobic interaction in the treated alginate leads to enhanced gel strength accompanied by more stable structure in physiological solution comparing to native sodium alginate hydrogel. Finally, the modified alginate tended to have no toxic effects on mesenchymal stem cell culture, rather it supported MSC chondrogenic differentiation.

Evaluation of alginate hydrogels under in vivo-like bioreactor conditions for cartilage tissue engineering

Alginate hydrogels in forms of discs and packed beds of microbeads (~800 μm) were tested in a novel bioreactor at 10% strain using two regimes: at a loading rate of 337.5 μm/s and at sequential increments of 50 μm displacement every 30 min. Compressive strength increased with the increase in alginate concentration (1.5 vs. 2% w/w) and the content of guluronic residues (38.5 vs. 67%). Packed beds of microbeads exhibited significantly higher (~1.5-3.4 fold) compression moduli than the respective discs indicating the effects of gel form and entrapped water. Short-term cultivation of microbeads with immobilized bovine calf chondrocytes (1.5% w/w, 33 × 10(6) cells/ml) under biomimetic conditions (dynamic compression: 1 h on/1 h off, 0.42 Hz, 10% strain) resulted in cell proliferation and bed compaction, so that the compression modulus slightly increased. Thus, the novel bioreactor demonstrated advantages in evaluation of biomaterial properties and cell-biomaterial interactions under in vivo-like settings.

Bone Regeneration with BMP-2 Gene-modified Mesenchymal Stem Cells Seeded on Nano-hydroxyapatite/Collagen/ Poly(L-Lactic Acid) Scaffolds

In this study, the capacity of bone morphogenetic protein 2 (BMP-2) gene-transfected bone marrow-derived mesenchymal stem cells (MSCs) in combination with nano-hydroxyapatite/collagen/poly(L-lactic acid) (nHAC/ PLA) to improve the repair of bone defects in rabbit was explored. MSCs from New Zealand White rabbits were cultured and injected with pIRES2-EGFPhBMP-2 or pIRES2-EGFP by electroporation. After the transfer efficiency was determined through the expression of EGFP, the MSCs were seeded on scaffolds to generate an in vitro 3D cell/scaffold construct. The adhesion and proliferation of the MSCs cultured in the scaffold was assessed by SEM. The cellular constructs obtained were allografted into the 15 mm critical-sized segmental bone defects in the radius of New Zealand White rabbits for 12 weeks. The bone regeneration was assessed by radiographical and histological analyses. In vitro, nHAC/PLA facilitated MSC adhesion and proliferation on the scaffold, and gene transfer efficiency reached a maximum of 35.5 ± 3.8%. In vivo, the implantation of BMP-2 transfected MSCs/nHAC/PLA construct significantly enhanced the formation of new bone in the segmental defect, compared to the control groups. This novel 3D BMP-2 transfected MSCs/nHAC/PLA construct has the potential for bone repair by genetic tissue engineering approach.

Hypertrophy is induced during the in vitro chondrogenic differentiation of human mesenchymal stem cells by bone morphogenetic protein-2 and bone morphogenetic protein-4 gene transfer

INTRODUCTION

The present study compares bone morphogenetic protein (BMP)-4 and BMP-2 gene transfer as agents of chondrogenesis and hypertrophy in human primary mesenchymal stem cells (MSCs) maintained as pellet cultures.

METHODS

Adenoviral vectors carrying cDNA encoding human BMP-4 (Ad.BMP-4) were constructed by cre-lox combination and compared to previously generated adenoviral vectors for BMP-2 (Ad.BMP-2), green fluorescent protein (Ad.GFP), or firefly luciferase (Ad.Luc). Cultures of human bone-marrow derived MSCs were infected with 5 x 10(2) viral particles/cell of Ad.BMP-2, or Ad.BMP-4, seeded into aggregates and cultured for three weeks in a defined, serum-free medium. Untransduced cells or cultures transduced with marker genes served as controls. Expression of BMP-2 and BMP-4 was determined by ELISA, and aggregates were analyzed histologically, immunohistochemically, biochemically and by RT-PCR for chondrogenesis and hypertrophy.

RESULTS

Levels of BMP-2 and BMP-4 in the media were initially 30 to 60 ng/mL and declined thereafter. BMP-4 and BMP-2 genes were equipotent inducers of chondrogenesis in primary MSCs as judged by lacuna formation, strong staining for proteoglycans and collagen type II, increased levels of GAG synthesis, and expression of mRNAs associated with the chondrocyte phenotype. However, BMP-4 modified aggregates showed a lower tendency to progress towards hypertrophy, as judged by expression of alkaline phosphatase, annexin 5, immunohistochemical staining for type X collagen protein, and lacunar size.

CONCLUSIONS

BMP-2 and BMP-4 were equally effective in provoking chondrogenesis by primary human MSCs in pellet culture. However, chondrogenesis triggered by BMP-2 and BMP-4 gene transfer showed considerable evidence of hypertrophic differentiation, with, the cells resembling growth plate chondrocytes both morphologically and functionally. This suggests caution when using these candidate genes in cartilage repair.

Encapsulated human mesenchymal stem cells: a unique hypoimmunogenic platform for long-term cellular therapy

Cell encapsulation is a promising approach for long-term delivery of therapeutic agents. Nonetheless, this system has failed to reach clinical settings, as the entrapped cells provoke a host immune reaction. Mesenchymal stem cells (MSCs), however, potentially may overcome this impediment and serve as a promising platform for cell-based microencapsulation. They are known to be hypoimmunogenic and can be genetically modified to express a variety of therapeutic factors. We have designed alginate-PLL microcapsules that can encapsulate human MSCs (hMSCs) for extended periods, as demonstrated by fluorescence and H(3)-thymidine assays. The encapsulated hMSCs maintained their mesenchymal surface markers and differentiated to all the typical mesoderm lineages. In vitro and in vivo immunogenicity studies revealed that encapsulated hMSCs were significantly hypoimmunogenic, leading to a 3-fold decrease in cytokine expression compared to entrapped cell lines. The efficacy of such systems was demonstrated by genetically modifying the cells to express the hemopexin-like protein (PEX), an inhibitor of angiogenesis. Live imaging and tumor measurements showed that encapsulated hMSC-PEX injected adjacent to glioblastoma tumors in nude mice led to a significant reduction in tumor volume (87%) and weight (83%). We clearly demonstrate that hMSCs are the cell of choice for microencapsulation cell based-therapy, thus bringing this technology closer to clinical application.

Physicochemical features of ultra-high viscosity alginates

The physicochemical characteristics of the ultra-high viscosity and highly biocompatible alginates extracted from Lessonia nigrescens (UHV(N)) and Lessonia trabeculata (UHV(T)) were analyzed. Fluorescence and (1)H NMR spectroscopies, viscometry, and multi-angle light scattering (MALS) were used for elucidation of the chemical structure, molar mass, and coil size. The sequential structures from NMR spectroscopy showed high guluronate content for UHV(T), but low for UHV(N). Intrinsic viscosity [eta] measurements exhibited unusual high values (up to 2750 mL/g), whereas [eta] of a commercial alginate was only about 970 mL/g. MALS batch measurements of the UHV-alginates yielded ultra-high values of the weight average molar mass (M(w) up to 1.1x10(6) g/mol) and of the z-average gyration radius (R(G)(z) up to 191 nm). The M(w) and R(G)(z) distributions of UHV-alginates and of ultrasonically degraded fractions were determined using size exclusion chromatography combined with MALS and asymmetrical flow-field-flow fractionation. The M(w) dependency of [eta] and R(G)(z) could be described by [eta]=0.059xM(w)(0.78) and R(G)(z)=0.103xM(w)(x). (UHV(N): x=0.52; UHV(T): x=0.53) indicating that the monomer composition has no effect on coil expansion. Therefore, the equations can be used to calculate M(w) and R(G)(z) values of UHV(T)- and UHV(N)-alginate mixtures as used in immunoisolation. Furthermore, the simple and inexpensive capillary viscometry can be used for real-time validation of the extraction and purification process of the UHV-alginates.

Bone morphogenetic protein-2 stimulation of cartilage regeneration in canine tracheal graft

BACKGROUND

Graft stenosis is among the most serious post-surgical complications that can occur after tracheal transplantation. Typically, stenosis is caused by resorption of tracheal cartilage. Bone morphogenetic protein-2 (BMP-2) is efficient at stimulating bone or cartilage regeneration. In this study, BMP-2 is tested for its effects on stimulation of cartilage regeneration in tracheal transplantation.

METHODS

For tracheal autotransplantation, 24 mongrel dogs were divided equally into four groups and BMP-2 was injected between the cartilage rings at doses of 1, 3, 5 or 7 mg. For tracheal allotransplantation, 12 mongrel dogs were divided equally into two groups. One group received 5 mg of BMP-2 per graft, and the other received collagen only as a control. The grafts were harvested after 4 weeks and subjected to pathologic analysis. The diameter of the graft lumen and areas of new cartilage regeneration were measured.

RESULTS

Regenerated cartilage areas were found in both the injected area and around the perichondrium. The areas of regenerated cartilage, as well as the diameter of the tracheal lumen, increased significantly with increasing concentrations of BMP-2. Five milligrams per milliliter was the most effective dose of BMP-2 in this study.

CONCLUSIONS

BMP-2 can significantly stimulate cartilage regeneration in tracheal grafts and also can be used to prevent stenosis after tracheal transplantation.

Osteogenic behavior of alginate encapsulated bone marrow stromal cells: an in vitro study

Sodium alginate is a useful polymer for the encapsulation and immobilization of a variety of cells in tissue engineering because it is biocompatible, biodegradable and easy to process into injectable microbeads. Despite these properties, little is known of the efficacy of calcium cross-linked alginate gel beads as a biodegradable scaffold for osteogenic cell proliferation and differentiation. In this study, we investigated the ability of rabbit derived bone marrow cells (BMCs) to proliferate and differentiate in alginate microbeads and compared them with BMCs cultured in poly-L-lysine (PLL) coated microbeads and on conventional 2D plastic surfaces. Results show that levels of proliferation and differentiation in microbeads and on tissue culture plastics were comparable. Cell proliferation in microbeads however diminished after fortification with a coating layer of PLL. Maximum cell numbers observed were, 3.32 x 10(5) +/- 1.72 x 103; 3.11 x 10(5) +/- 1.52 x 10(3) and 3.28 x 10(5) +/- 1.21 x 10(3 ) for the uncoated, PLL coated and plastic surface groups respectively. Alkaline phosphatase and protein expressions reflected the stage of cell differentiation. We conclude that calcium cross-linked alginate microbeads can act as a scaffold for BMC proliferation and osteogenic differentiation and has potential for use as 3D degradable scaffold.

Programmable cells of monocytic origin (PCMO): a source of peripheral blood stem cells that generate collagen type II-producing chondrocytes

The focus of this study was a new adult pluripotent cell derived from human peripheral blood monocytes identified as a "programmable cell of monocytic origin" (PCMO). In contrast to bone marrow-derived stem cells, these cells can be harvested from peripheral venous blood without aspiration of the bone marrow and have multilineage potential comparable to that of mesenchymal stem cells (MSC). The aim of this study was to evaluate the potential of PCMOs to differentiate into collagen type II-producing chondrocytes using various extrinsic cues (TGFbeta-1, IGF-1, BMP-2, and BMP-7). Collagen type I and II proteins were localized using immunohistochemistry and quantified by enzyme-linked immunosorbent assays (ELISA). The shape of the differentiating PCMOs was monitored with electron microscopy. Collagen type I and II messenger RNA expression was analyzed using real-time reverse transcriptase-polymerase chain reaction (RT PCR) and regular RT PCR. Immunohistochemistry revealed a strong accumulation of collagen type II after a 6-week incubation period with BMP-2, BMP-7, TGF-beta, IGF-I, and TGF-beta, and IGF-1. Collagen type I was only mildly induced by the applied stimulants. Electron microscopy findings showed a shift from a monocyte-like structure to a chondrocyte-like structure after 2 weeks of stimulation. Stimulation of PCMOs with BMP-2, BMP-7, TGF-beta, IGF-I, and TGF-beta, and IGF-1 induced a chondrogenic differentiation with continuous expression of collagen type II mRNA and protein over several weeks time. Collagen type I and II expression in undifferentiated PCMOs or in control cells incubated without any stimulant was not detected. PCMOs have the potential to differentiate into collagen type II synthesizing chondrocytes. The ability to reprogram and differentiate PCMOs from peripheral blood into sizable quantities might enable their clinical application in cartilage repair after mechanical injury or in cases of osteoarthritis.

Novel bioreactors for the culture and expansion of aggregative neural stem cells

Neural stem cells have been cultured as three-dimensional aggregates in a number of different types of bioreactors. The design and configuration of the bioreactor are shown to be crucial factors for the successful propagation of the cells. A novel bioreactor with liquid re-circulation and a working volume of 200 ml has been designed, tested and shown to be able to produce a higher cell vitality compared to those produced in multi-well plates, shake flasks and stirred flasks. The novel reactor was able to produce a total density of cells of 3.5 x 10(6) cells/ml consisting of a larger number of smaller and proliferative aggregates, compared to only 1.8 x 10(6) cells/ml produced in a multi-well plate. Shake flasks and stirred flasks commonly used for facilitating mass transfer in the culture of micro-organisms are shown to be unsuitable for the propagation of neural stem cells.

Alginate Microbeads as Cell Support for Cartilage Tissue Engineering: Bioreactor Studies

Alginate was shown to be a suitable support for entrapment and cultivation of chondrocytes and bone marrow stromal cells, which under appropriate in vitro conditions synthesized cartilaginous components. The main limitation in these cultures may be low rates of mass transport through the alginate matrix governed by diffusion. In this study, we have designed and utilized a bioreactor system based on a packed bed of alginate beads with immobilized chondrogenic cells. Continuous medium perfusion provided convective mass transport through the packed bed, while small diameters of beads (2.5 mm and down to 500 μm) ensured short diffusion distances to the immobilized cells. During up to 5 weeks of cultivation, the cells synthesized extracellular matrix components merging beads together and indicating potentials of this system for precise regulation of the cellular microenvironment in cartilage tissue engineering.

Biologic properties of mesenchymal stem cells derived from bone marrow and adipose tissue

The biologic characteristics of mesenchymal stem cells (MSCs) isolated from two distinct tissues, bone marrow and adipose tissue were evaluated in these studies. MSCs derived from human and non-human primate (rhesus monkey) tissue sources were compared. The data indicate that MSCs isolated from rhesus bone marrow (rBMSCs) and human adipose tissue (hASCs) had more similar biologic properties than MSCs of rhesus adipose tissue (rASCs) and human bone marrow MSCs (hBMSCs). Analyses of in vitro growth kinetics revealed shorter doubling time for rBMSCs and hASCs. rBMSCs and hASCs underwent significantly more population doublings than the other MSCs. MSCs from all sources showed a marked decrease in telomerase activity over extended culture; however, they maintained their mean telomere length. All of the MSCs expressed embryonic stem cell markers, Oct-4, Rex-1, and Sox-2 for at least 10 passages. Early populations of MSCs types showed similar multilineage differentiation capability. However, only the rBMSCs and hASCs retain greater differentiation efficiency at higher passages. Overall in vitro characterization of MSCs from these two species and tissue sources revealed a high level of common biologic properties. However, the results demonstrate clear biologic distinctions, as well.

Tissue engineering with chondrogenically differentiated human embryonic stem cells

This study describes the development and application of a novel strategy to tissue engineer musculoskeletal cartilages with human embryonic stem cells (hESCs). This work expands the presently limited understanding of how to chondrogenically differentiate hESCs through the use of chondrogenic medium alone (CM) or CM with two growth factor regimens: transforming growth factor (TGF)-beta3 followed by TGF-beta1 plus insulin-like growth factor (IGF)-I or TGF-beta3 followed by bone morphogenic protein (BMP)-2. It also extends the use of the resulting chondrogenically differentiated cells for cartilage tissue engineering through a scaffoldless approach called self-assembly, which was conducted in two modes: with (a) embryoid bodies (EBs) or (b) a suspension of cells enzymatically dissociated from the EBs. Cells from two of the differentiation conditions (CM alone and TGF-beta3 followed by BMP-2) produced fibrocartilage-like constructs with high collagen I content, low collagen II content, relatively high total collagen content (up to 24% by dry weight), low sulfated glycosaminoglycan content (approximately 4% by dry weight), and tensile properties on the order of megapascals. In contrast, hESCs treated with TGF-beta3 followed by TGF-beta1 + IGF-I produced constructs with no collagen I. Results demonstrated significant differences among the differentiation conditions in terms of other biochemical and biomechanical properties of the self-assembled constructs, suggesting that distinct growth factor regimens differentially modulate the potential of the cells to produce cartilage. Furthermore, this work shows that self-assembly of cells obtained by enzymatic dissociation of EBs is superior to self-assembly of EBs. Overall, the results of this study raise the possibility of manipulating the characteristics of hESC-generated tissue toward specific musculoskeletal cartilage applications.

Mesenchymal stem cell-mediated gene delivery of bone morphogenetic protein-2 in an articular fracture model

In articular fractures, both bone and cartilage are injured. We tested whether stem cells transduced with bone morphogenetic protein 2 (BMP2) can promote bone and cartilage repair. Distal femoral articular osteotomies in nude rats were treated with stem cells, either wild-type or transduced with an adenoviral (Ad) BMP2. Cells were delivered in alginate (ALG) carrier or by direct injection in saline solution. Gene expression of these cells at the osteotomy site was confirmed by in vivo imaging. At day 14, only the group that received AdBMP2 stem cells by direct injection showed completely healed osteotomies, while other groups remained unhealed (P < 0.0003). In ALG groups, bone healing was impeded by the development of a chondroid mass, most pronounced in the AdBMP2 ALG group (P < 0.002). We were successful in achieving repair of both bone and cartilage in vivousing direct stem cell injection. Our data suggests that BMP2 augmentation might be critically important in achieving this effect.

Stem cell-based tissue engineering with silk biomaterials

Silks are naturally occurring polymers that have been used clinically as sutures for centuries. When naturally extruded from insects or worms, silk is composed of a filament core protein, termed fibroin, and a glue-like coating consisting of sericin proteins. In recent years, silk fibroin has been increasingly studied for new biomedical applications due to the biocompatibility, slow degradability and remarkable mechanical properties of the material. In addition, the ability to now control molecular structure and morphology through versatile processability and surface modification options have expanded the utility for this protein in a range of biomaterial and tissue-engineering applications. Silk fibroin in various formats (films, fibers, nets, meshes, membranes, yarns, and sponges) has been shown to support stem cell adhesion, proliferation, and differentiation in vitro and promote tissue repair in vivo. In particular, stem cell-based tissue engineering using 3D silk fibroin scaffolds has expanded the use of silk-based biomaterials as promising scaffolds for engineering a range of skeletal tissues like bone, ligament, and cartilage, as well as connective tissues like skin. To date fibroin from Bombyx mori silkworm has been the dominant source for silk-based biomaterials studied. However, silk fibroins from spiders and those formed via genetic engineering or the modification of native silk fibroin sequence chemistries are beginning to provide new options to further expand the utility of silk fibroin-based materials for medical applications.

Labelling of human adipose-derived stem cells for non-invasive in vivo cell tracking

Human adipose-derived stem cells (ASC) can be expanded in an undifferentiated state or differentiated along the osteogenic, chondrogenic, adipogenic, myogenic, endothelial and neurogenic lineage. To test their in vivo and in situ regenerative potential, their fate needs to be traced after application in suitable defect models. Non-invasive imaging systems allow for real time tracking of labelled cells in the living animal. We have evaluated a bioluminescence cell tracking approach to visualise ASC labelled with luciferase in the living animal. Two procedures have been tested to efficiently label human stem cells with a reporter gene (luciferase, green fluorescent protein), namely lipofection with Lipofectamine 2000 and electroporation with a Nucleofector device. With both lipofection and nucleofection protocols, we have reached transfection efficiencies up to 60%. Reporter gene expression was detectable for 3 weeks in vitro and did not interfere with the phenotype and the stem cell properties of the cells. By means of a highly sensitive CCD camera, we were able to achieve real time imaging of cell fate for at least 20 days after application (intravenous, intramuscular, intraperitoneal, subcutaneous) in nude mice. Moreover, we were able to influence cell mobility by choosing different modes of application such as enclosure in fibrin matrix. The optical imaging system with transient transfection is an elegant cell-tracking concept to follow survival and fate of human stem cells in small animals.

In vitro evaluation of alginate encapsulated adipose-tissue stromal cells for use as injectable bone graft substitute

This study aims to investigate the survival and osteogenic behavior of murine-derived adipose-tissue stromal cells (ATSCs) encapsulated in alginate microcapsules thereby instigating further studies in this cell delivery strategy for in vivo osteogenesis. Cell viability was quantified using a tetrazolium-based assay and osteogenic differentiation was evaluated by both alkaline-phosphatase (ALP) histochemistry and osteocalcin mRNA analysis. Following microencapsulation, cell numbers increased from 3.9 x 10(3) on day 1 to 7.8 x 10(3) on day 7 and maintained excellent viability in the course of 21-day culture. ALP was 6.9, 5.5, and 3.2 times higher than monolayer cultures on days 7, 14, and 21, respectively. In addition, osteocalcin mRNA was detectable in encapsulated cultures earlier (day 14) than monolayer cultures. We conclude that alginate microcapsules can act as three-dimensional matrix for ATSC proliferation and has potential for use as injectable, biodegradable scaffold in bone tissue engineering.

Gene-mediated osteogenic differentiation of stem cells by bone morphogenetic proteins-2 or -6

Bone marrow-derived mesenchymal stem cells (BMDMSC) hold promise for targeted osteogenic differentiation and can be augmented by delivery of genes encoding bone morphogenetic proteins (BMP). The feasibility of promoting osteogenic differentiation of BMDMSC was investigated using two BMP genes in monolayer and three-dimensional alginate culture systems. Cultured BMDMSC were transduced with E1-deleted adenoviral vectors containing either human BMP2 or BMP6 coding sequence under cytomegalovirus (CMV) promoter control [17:1 multiplicities of infection (moi)] and either sustained in monolayer or suspended in 1 mL 1.2% alginate beads for 22 days. Adenovirus (Ad)-BMP-2 and Ad-BMP-6 transduction resulted in abundant BMP-2 and BMP-6 mRNA and protein expression in monolayer culture and BMP-2 protein expression in alginate cultures. Ad-BMP-2 and Ad-BMP-6 transduced BMDMSC in monolayer had earlier and robust alkaline phosphatase-positive staining and mineralization and were sustained for a longer duration with better morphology scores than untransduced or Ad-beta-galactosidase-transduced cells. Ad-BMP-2- and, to a lesser degree, Ad-BMP-6-transduced BMDMSC suspended in alginate demonstrated greater mineralization than untransduced cells. Gene expression studies at day 2 confirmed an inflammatory response to the gene delivery process with upregulation of interleukin 8 and CXCL2. Upregulation of genes consistent with response to BMP exposure and osteogenic differentiation, specifically endochondral ossification and extracellular matrix proteins, occurred in BMP-transduced cells. These data support that transduction of BMDMSC with Ad-BMP-2 or Ad-BMP-6 can accelerate osteogenic differentiation and mineralization of stem cells in culture, including in three-dimensional culture. BMP-2-transduced stem cells suspended in alginate culture may be a practical carrier system to support bone formation in vivo. BMP-6 induced a less robust cellular response than BMP-2, particularly in alginate culture.

Encapsulation of adult human mesenchymal stem cells within collagen-agarose microenvironments

Reliable control over the process of cell differentiation is a major challenge in moving stem cell-based therapies forward. The composition of the extracellular matrix (ECM) is known to play an important role in modulating differentiation. We have developed a system to encapsulate adult human mesenchymal stem cells (hMSC) within spherical three-dimensional (3D) microenvironments consisting of a defined mixture of collagen Type I and agarose polymers. These protein-based beads were produced by emulsification of liquid hMSC-matrix suspensions in a silicone fluid phase and subsequent gelation to form hydrogel beads, which were collected by centrifugation and placed in culture. Bead size and size distribution could be varied by changing the encapsulation parameters (impeller speed and blade separation), and beads in the range of 30-150 microns in diameter were reliably produced. Collagen concentrations up to 40% (wt/wt) could be incorporated into the bead matrix. Visible light and fluorescence microscopy confirmed that the collagen matrix was uniformly distributed throughout the beads. Cell viability post-encapsulation was in the range of 75-90% for all bead formulations (similar to control slab gels) and remained at this level for 8 days in culture. Fluorescent staining of the actin cytoskeleton revealed that hMSC spreading increased with increasing collagen concentration. This system of producing 3D microenvironments of defined matrix composition therefore offers a way to control cell-matrix interactions and thereby guide hMSC differentiation. The bead format allows the use of small amounts of matrix proteins, and such beads can potentially be used as a cell delivery vehicle in tissue repair applications.

In vitro cartilage tissue engineering with 3D porous aqueous-derived silk scaffolds and mesenchymal stem cells

Adult cartilage tissue has limited self-repair capacity, especially in the case of severe damages caused by developmental abnormalities, trauma, or aging-related degeneration like osteoarthritis. Adult mesenchymal stem cells (MSCs) have the potential to differentiate into cells of different lineages including bone, cartilage, and fat. In vitro cartilage tissue engineering using autologous MSCs and three-dimensional (3-D) porous scaffolds has the potential for the successful repair of severe cartilage damage. Ideally, scaffolds designed for cartilage tissue engineering should have optimal structural and mechanical properties, excellent biocompatibility, controlled degradation rate, and good handling characteristics. In the present work, a novel, highly porous silk scaffold was developed by an aqueous process according to these criteria and subsequently combined with MSCs for in vitro cartilage tissue engineering. Chondrogenesis of MSCs in the silk scaffold was evident by real-time RT-PCR analysis for cartilage-specific ECM gene markers, histological and immunohistochemical evaluations of cartilage-specific ECM components. Dexamethasone and TGF-beta3 were essential for the survival, proliferation and chondrogenesis of MSCs in the silk scaffolds. The attachment, proliferation, and differentiation of MSCs in the silk scaffold showed unique characteristics. After 3 weeks of cultivation, the spatial cell arrangement and the collagen type-II distribution in the MSCs-silk scaffold constructs resembles those in native articular cartilage tissue, suggesting promise for these novel 3-D degradable silk-based scaffolds in MSC-based cartilage repair. Further in vivo evaluation is necessary to fully recognize the clinical relevance of these observations.

Real-time 3-D dark-field microscopy for the validation of the cross-linking process of alginate microcapsules

Alginate-based microencapsulation is a promising method for long-term maintenance of cellular and membrane function of the cells and tissue fragments required for in vitro and in vivo biosensors, for tissue engineering and particularly for immunoisolation of non-autologous transplants. Microcapsules of high mechanical strength and optimum permeability can be produced by injection of BaCl2 crystals into alginate droplets before they come into contact with external Ba2+. A key requirement is that the system parameters (number of crystals, speed of the crystal stream etc.) are properly adjusted according to the mannuronic and guluronic acid ratio and the average molecular mass of the alginate as well as to the diameter of the microcapsules. Robust, reliable, rapid and low-cost validation tools are, therefore, needed for assurance of the microcapsule quality. Here, we describe a novel three-dimensional (3-D) dark-field microscopy that allows the real-time measurement of the number and spatial distribution of the injected Ba2+ ions throughout the microcapsules after treatment with sulphate. This novel method requires only a conventional microscope equipped with three polarising filters and a double aperture stop. In contrast to confocal laser scanning microscopy images, peripherally attached BaSO4 precipitates can clearly be distinguished from internal ones. The data also demonstrate that several steps of the alginate gelling process must be improved before such immunoisolation can be used in patients.

Alginate Microbeads as Potential Support for Cultivation of Bone Marrow Stromal Cells

Alginate is currently being employed and explored for a broad range of biomedical and biotechnology applications, due to its biodegradability and simple procedure for cell immobilization. However, cell immobilization was mostly aimed for immunoisolatory and biochemical processing applications and far less is known about potentials of alginate as a substrate for tissue formation. In the present work, isolation, immobilization and cultivation procedures of murine bone marrow stromal cells (BMSC) were studied and standardized in order to establish the alginate-bioreactor culture system for chondrogenic and/or hematopoiesis-supportive tissue progression. Two techniques for cell immobilization based on alginate were investigated: entrapment within gel matrix using electrostatic droplet generation and simple cell adsorption onto gel surfaces. Alginate gels in forms of microbeads and discs with immobilized culture expanded BMSC were cultivated for up to 30 days and analyzed for surface properties, cell concentration, viability, and differentiation.

DETAILED EXAMINATION OF CARTILAGE FORMATION and ENDOCHONDRAL OSSIFICATION USING HUMAN MESENCHYMAL STEM CELLS

1. Cartilage formation is one of the most complex processes in biology. The aim of the present study was to produce a simplified in vitro system to resolve its complexities. 2. Human mesenchymal stem cells (hMSC) were maintained in alginate beads with a chondrogenesis-induction medium containing 10 ng/mL transforming growth factor (TGF)-beta3. 3. At days 0, 2, 4, 8, 12, 16 and 19 of culture, we examined the cells using a light microscope and a transmission electron microscope. We also evaluated the cells using immunocryo-ultramicrotomy. 4. The present study demonstrated that hMSC produced numerous extracellular matrices containing abnormal collagen fibres following their exposure to a chondrogenesis-induction medium in alginate beads. At this time, calcification was detected by alizarin red staining and electron-dense particles, composed of hydroxyapatite, appeared in both the cytoplasm and the extracellular spaces. 5. In addition immunocryo-ultramicrotomy revealed that collagen type II, type X and proteoglycan were prominent and that osteocalcin was detectable at day 2. During 8-16 days of culture, collagen type X maintained its strong expression and the expression of osteocalcin increased markedly. In contrast, the expression of collagen type II and proteoglycan decreased with time. 6. These findings demonstrate that hMSC rapidly differentiate into chondrocytes expressing collagen type II and proteoglycan. 7. The expression of collagen type II and proteoglycan then dropped and the activity of collagen type X was the same as before (4-8 days). As a result, the cells developed into the next cell type, so-called hypertrophic chondrocytes. Finally, both osteocalcin activity and the calcification of cell bodies and extracellular matrices became evident, indicating endochondral ossification. Thus, we conclude that hMSC rapidly differentiate into chondrocytes, followed by the development of hypertrophic chondrocytes. Endochondral ossification is the final form in this culture. 8. The findings of the present study indicate that our three-dimensional culture is a convenient in vitro model for the investigation of the regulatory mechanisms of cartilage formation and endochondral ossification.

A three-dimensional nanofibrous scaffold for cartilage tissue engineering using human mesenchymal stem cells

The utilization of adult stem cells in tissue engineering is a promising solution to the problem of tissue or organ shortage. Adult bone marrow derived mesenchymal stem cells (MSCs) are undifferentiated, multipotential cells which are capable of giving rise to chondrocytes when maintained in a three-dimensional culture and treated with members of the transforming growth factor-beta (TGF-beta) family of growth factors. In this study, we fabricated a nanofibrous scaffold (NFS) made of a synthetic biodegradable polymer, poly(-caprolactone) (PCL), and examined its ability to support in vitro chondrogenesis of MSCs. The electrospun PCL porous scaffold was constructed of uniform, randomly oriented nanofibers with a diameter of 700 nm, and structural integrity of this scaffold was maintained over a 21-day culture period. MSCs cultured in NFSs in the presence of TGF-beta1 differentiated to a chondrocytic phenotype, as evidenced by chondrocyte-specific gene expression and synthesis of cartilage-associated extracellular matrix (ECM) proteins. The level of chondrogenesis observed in MSCs seeded within NFSs was comparable to that observed for MSCs maintained as cell aggregates or pellets, a widely used culture protocol for studying chondrogenesis of MSCs in vitro. Due to the physical nature and improved mechanical properties of NFSs, particularly in comparison to cell pellets, the findings reported here suggest that the PCL NFS is a practical carrier for MSC transplantation, and represents a candidate scaffold for cell-based tissue engineering approaches to cartilage repair.

Porous alginate/hydroxyapatite composite scaffolds for bone tissue engineering: Preparation, characterization, andin vitro studies

In this study a series of alginate/hydroxyapatite (HAP) composite scaffolds was prepared by phase separation. HAP was incorporated into the alginate gel solution to improve both the mechanical and cell-attachment properties of the scaffolds. These scaffolds had a well-interconnected porous structure with an average pore size of 150 microm and over 82% porosity. The alginate/HAP scaffold prepared at -40 degrees C with a 50% HAP content showed the best mechanical properties. The morphology of scaffolds could be manipulated by tuning the quenching temperature during the preparation. The dissolution of alginate/HAP composite scaffolds could be slowed by the pretreating them by immersion in 1.0 M CaCl(2) solution. The rat osteosarcoma UMR106 cells, an osteoblastic cell line, seeded in the scaffolds, displayed better cell attachment to the 75/25 and 50/50 alginate/HAP composite scaffolds than to the pure alginate scaffold. The natural polymeric sponges that fabricated in this study may be a promising approach for tissue-engineering applications.

Chondrogenic differentiation of mesenchymal progenitor cells encapsulated in ultrahigh-viscosity alginate

One major problem of current cartilage repair techniques is that three-dimensional encapsulated mesenchymal progenitor cells frequently differentiate into hypertrophic cells that express type X collagen and osteogenic marker genes. Studies on wild-type cells of murine mesenchymal C3H10T1/2 progenitor cells as well as on cells transfected with cDNA encoding for bone morphogenetic protein (BMP)-2 or -4 in alginate revealed that the formation of markers for osteogenesis and chondrogenic hypertrophy apparently depended on the BMP-transfection. Cells were encapsulated in ultrahigh-viscosity, clinical grade alginate and differentiation was studied over a period of 17 days. Consistent with results published previously staining with haematoxylin-eosin or Alcian blue, immunohistochemical analysis, and quantitative RT-PCR confirmed the expression of chondrogenic markers (chondroitin-4- and -6-sulfate as well as type II collagen). Production of chondrogenic markers was particularly high in BMP-4 transfected cells. Hypertrophic chondrogenesis did not occur in BMP-4 transfected cells, as revealed by measurement of type X collagen, but could be demonstrated for wild-type cells and to some extent for BMP-2 transfected cells. The osteogenic markers, type I collagen, alkaline phosphatase, and Cbfa1 were upregulated in all cell lines even though the levels and the time of upregulation differed significantly. In any case, the markers were less and only very shortly expressed in BMP-4 transfected cells as revealed quantitatively by real time RT-PCR. Thus, the in vitro results suggested that BMP-4 is a very promising candidate for suppressing chondrogenic hypertrophy, while simultaneously enhancing the production of chondrogenic components.

Fabrication of homogeneously cross-linked, functional alginate microcapsules validated by NMR-, CLSM- and AFM-imaging

Cross-linked alginate microcapsules of sufficient mechanical strength can immunoisolate cells for the long-term treatment of hormone and other deficiency diseases in human beings. However, gelation of alginate by external Ba(2+) (or other divalent cations) produces non-homogeneous cross-linking of the polymeric mannuronic (M) and guluronic (G) acid chains. The stability of such microcapsules is rather limited. Here, we show that homogeneous cross-linking can be achieved by injecting BaCl(2) crystals into alginate droplets before they come into contact with external BaCl(2). The high effectiveness of this crystal gun method is demonstrated by confocal laser scanning microscopy and by advanced nuclear magnetic resonance imaging. Both techniques gave clear-cut evidence that homogeneous cross-linkage throughout the microcapsule is only obtained with simultaneous internal and external gelation. Atomic force microscopy showed a very smooth surface topography for microcapsules made by the crystal gun method, provided that excess Ba(2+) ions were removed immediately after gelation. In vitro experiments showed greatly suppressed swelling for crystal gun microcapsules. Even alginate extracted from Lessonia nigrescens (highly biocompatible) yielded microcapsules with long-term mechanical stability not hitherto possible. Encapsulation of rat islets, human monoclonal antibodies secreting hybridoma cells and murine mesenchymal stem cells transfected with cDNA encoding for bone morphogenetic protein (BMP-4) revealed that injection of BaCl(2) crystals has no adverse side effects on cell viability and function. However, the release of low-molecular weight factors (such as insulin) may be delayed when using alginate concentrations in the usual range.

In vitro chondrogenesis of human bone marrow-derived mesenchymal progenitor cells in monolayer culture: activation by transfection with TGF-beta2

Bone marrow-derived mesenchymal progenitor cells are capable of chondrogenesis, making them a possible source of cells for cartilage tissue engineering. Because of this, we studied the effect of human transforming growth factor beta2 (TGF-beta2) on mesenchymal progenitor cell chondrogenesis in monolayer culture using gene transfection technology. A recombinant pcDNA3.1(+)/TGF-beta2 construct containing a full-length TGF-beta2 from a human placental cDNA library was created through gene cloning and DNA recombination. The construct was then lipofected into mesenchymal progenitor cells isolated from human bone marrow. RT-PCR, Western blotting, and immunohistochemistry analyses were performed to identify the expression of TGF-beta2 and cartilage-associated genes and proteins. The results showed that TGF-beta2 was expressed throughout the culture period. The transfected progenitor cells expressed and produced collagen type II and aggrecan 48 h after transfection, and the expression and synthesis were upregulated after 4 weeks. In contrast, the tested genes and proteins were not detected in non-transfected cells. This shows that transfection of pcDNA3.1(+)/TGF-beta2 into mesenchymal progenitor cells is able to provide transient and persistent expression of cartilage-specific genes and proteins, and suggests that the differentiation of human marrow-derived mesenchymal progenitor cells into chondrocytes in monolayer culture is feasible and may be induced by TGF-beta2.