The effects of calcium phosphate cement particles on osteoblast functions

The Role of the Innate Immune System in Wear Debris-Induced Inflammatory Peri-Implant Osteolysis in Total Joint Arthroplasty

Periprosthetic osteolysis remains a leading complication of total hip and knee arthroplasty, often resulting in aseptic loosening of the implant and necessitating revision surgery. Wear-induced particulate debris is the main cause initiating this destructive process. The purpose of this article is to review recent advances in understanding of how wear debris causes osteolysis, and emergent strategies for the avoidance and treatment of this disease. A strong activator of the peri-implant innate immune this debris-induced inflammatory cascade is dictated by macrophage secretion of TNF-α, IL-1, IL-6, and IL-8, and PGE2, leading to peri-implant bone resorption through activation of osteoclasts and inhibition of osteoblasts through several mechanisms, including the RANK/RANKL/OPG pathway. Therapeutic agents against proinflammatory mediators, such as those targeting tumor necrosis factor (TNF), osteoclasts, and sclerostin, have shown promise in reducing peri-implant osteolysis in vitro and in vivo; however, radiographic changes and clinical diagnosis often lag considerably behind the initiation of osteolysis, making timely treatment difficult. Considerable efforts are underway to develop such diagnostic tools, therapies, and identify novel targets for therapeutic intervention.

The Osteoinductivity of Calcium Phosphate-Based Biomaterials: A Tight Interaction With Bone Healing

Calcium phosphate (CaP)-based bioceramics are the most widely used synthetic biomaterials for reconstructing damaged bone. Accompanied by bone healing process, implanted materials are gradually degraded while bone ultimately returns to its original geometry and function. In this progress report, we reviewed the complex and tight relationship between the bone healing response and CaP-based biomaterials, with the emphasis on the in vivo degradation mechanisms of such material and their osteoinductive properties mediated by immune responses, osteoclastogenesis and osteoblasts. A deep understanding of the interaction between biological healing process and biomaterials will optimize the design of CaP-based biomaterials, and further translate into effective strategies for biomaterials customization.

Improved Anti-Washout Property of Calcium Sulfate/Tri-Calcium Phosphate Premixed Bone Substitute with Glycerin and Hydroxypropyl Methylcellulose

Calcium sulfate/calcium phosphate (CS-CP)-based bone substitutes have been developed in premixed putty for usage in clinical applications. However, it is difficult to completely stop the bleeding during an operation because premixed putty can come into contact with blood or body fluids leading to disintegration. Under certain conditions depending on particle size and morphology, collapsed (washed) particles can cause inflammation and delay bone healing. In this context, anti-washout premixed putty CS-CP was prepared by mixing glycerin with 1, 2, and 4 wt% of hydroxypropyl methylcellulose (HPMC), and the resultant anti-washout properties were evaluated. The results showed that more than 70% of the premixed putty without HPMC was disintegrated after being immersed into simulated body fluid (SBF) for 15 min. The results demonstrated that the more HPMC was contained in the premixed putty, the less disintegration occurred. We conclude that CS-CP pre-mixed putty with glycerin and HPMC is a potential bone substitute that has good anti-washout properties for clinical applications.

Effect of thermocycling on the surface texture and release of titanium particles from titanium alloy (Ti6Al4V) plates and dental implants: An in vitro study

STATEMENT OF PROBLEM

The release of titanium (Ti) particles from the surface of endosseous dental implants is not well understood.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of thermocycling on the surface texture and release of Ti particles from the surface of dental implants.

MATERIAL AND METHODS

Three MSI dental implants and 3 Ti alloy (Ti₆Al₄V) plates were divided into 6 subgroups (n=3). Specimens in each group were subjected to 0 (control group), 100, 200, 500, 1000, and 2000 thermocycles. After each cycling process, artificial saliva was collected, and the concentrations of released Ti particles were quantified by inductively coupled plasma-mass spectrophotometry (ICP-MS). The surfaces of the dental implants and Ti plates were evaluated before and after thermocycling by scanning electron microscopy (SEM), and SEM images were analyzed by using the ImageJ software program. Data were analyzed by mixed-model ANOVA and post hoc Tukey tests (α=.05).

RESULTS

The greatest Ti release was seen after 2000 thermocycles. After increasing the number of cycles, additional Ti particles were released. SEM images of the surfaces of the dental implants and Ti plates displayed significant changes in surface texture.

CONCLUSIONS

Thermocycling continuously removed the protective TiO₂ layer on the surface of dental implants, resulting in the release of Ti particles. The surface treatment and texture did not affect the release of Ti particles.

Injectable polypeptide hydrogel/inorganic nanoparticle composites for bone tissue engineering

The general concept of tissue engineering is to restore biological function by replacing defective tissues with implantable, biocompatible, and easily handleable cell-laden scaffolds. In this study, osteoinductive and osteoconductive super paramagnetic Fe₃O₄ nanoparticles (MNP) and hydroxyapatite (HAP) nanoparticles were incorporated into a di-block copolymer based thermo-responsive hydrogel, methoxy(polyethylene glycol)-polyalanine (mPA), at various concentrations to afford composite, injectable hydrogels. Incorporating nanoparticles into the thermo-responsive hydrogel increased the complex viscosity and decreased the gelation temperature of the starting hydrogel. Functionally, the integration of inorganic nanoparticles modulated bio-markers of bone differentiation and enhanced bone mineralization. Moreover, this study adopted the emerging method of using either a supplementary static magnetic field (SMF) or a moving magnetic field to elicit biological response. These results demonstrate that combining external (magnet) and internal (scaffold) magnetisms is a promising approach for bone regeneration.

Chemical and Physical Approaches to Extend the Replicative and Differentiation Potential of Stem Cells

Cell therapies using mesenchymal stem cells (MSCs) and endothelial progenitor cells (EPCs) are increasing in regenerative medicine, with applications to a growing number of aging-associated dysfunctions and degenerations. For successful therapies, a certain mass of cells is needed, requiring extensive ex vivo expansion of the cells. However, the proliferation of both MSCs and EPCs is limited as a result of telomere shortening-induced senescence. As cells approach senescence, their proliferation slows down and differentiation potential decreases. Therefore, ways to delay senescence and extend the replicative lifespan these cells are needed. Certain proteins and pathways play key roles in determining the replicative lifespan by regulating ROS generation, damage accumulation, or telomere shortening. And, their agonists and gene activators exert positive effects on lifespan. In many of the treatments, importantly, the lifespan is extended with the retention of differentiation potential. Furthermore, certain culture conditions, including the use of specific atmospheric conditions and culture substrates, exert positive effects on not only the proliferation rate, but also the extent of proliferation and differentiation potential as well as lineage determination. These strategies and known underlying mechanisms are introduced in this review, with an evaluation of their pros and cons in order to facilitate safe and effective MSC expansion ex vivo.

Biomimetic, Osteoconductive Non-mulberry Silk Fiber Reinforced Tricomposite Scaffolds for Bone Tissue Engineering

Composite biomaterials as artificial bone graft materials are pushing the present frontiers of bioengineering. In this study, a biomimetic, osteoconductive tricomposite scaffold made of hydroxyapatite (HA) embedded in non-mulberry Antheraea assama (A. assama) silk fibroin fibers and its fibroin solution is explored for its osteogenic potential. Scaffolds were physico-chemically characterized for morphology, porosity, secondary structure conformation, water retention ability, biodegradability, and mechanical property. The results revealed a ∼5-fold increase in scaffold compressive modulus on addition of HA and silk fibers to liquid silk as compared to pure silk scaffolds while maintaining high scaffold porosity (∼90%) with slower degradation rates. X-ray diffraction (XRD) results confirmed deposition of HA crystals on composite scaffolds. Furthermore, the crystallite size of HA within scaffolds was strongly regulated by the intrinsic physical cues of silk fibroin. Fourier transform infrared (FTIR) spectroscopy studies indicated strong interactions between HA and silk fibroin. The fabricated tricomposite scaffolds supported enhanced cellular viability and function (ALP activity) for both MG63 osteosarcoma and human bone marrow stem cells (hBMSCs) as compared to pure silk scaffolds without fiber or HA addition. In addition, higher expression of osteogenic gene markers such as collagen I (Col-I), osteocalcin (OCN), osteopontin (OPN), and bone sialoprotein (BSP) further substantiated the applicability of HA composite silk scaffolds for bone related applications. Immunostaining studies confirmed localization of Col-I and BSP and were in agreement with real-time gene expression results. These findings demonstrate the osteogenic potential of developed biodegradable tricomposite scaffolds with the added advantage of the affordability of its components as bone graft substitute materials.

Adverse effect of beta-tricalcium phosphate with zeta potential control in repairing critical defects in rats' calvaria

Objective

To evaluate whether a new biphasic cement composed of calcium sulfate and beta tricalcium phosphate with zeta potential control could induce or lead to bone neoformation in critical defects.

Methods

A critical defect of diameter 8 mm was made in the calvaria of forty male Wistar rats. In the Test Group (n = 20), the defects were filled with cement. In the Control Group (n = 20), the defect was not filled and only coagulum was present. The animals were sacrificed 7, 14, 21 and 42 days after the operation. Calvaria specimens were subjected to microtomography and were then prepared for histological analysis. The analyses included morphological assessment on the histopathology of the repair; comparative morphometric evaluation of the area of formation of bone trabeculae between the groups; and histochemical staining by means of tartrate-resistant phosphatase (TRAP) in order to identify osteoclasts.

Results

Microtomographic images of the defects filled by the cement did not show any decrease in area over the course of postoperative evolution. In the Test Group, the material continued to present a foreign-body response until the last observational periods. Histomorphological analysis showed that there were more significant groupings of giant cells in the Test Group and greater maturity of neoformed bone in the Control Group. Exogenous material was also present. Histomorphometric analysis showed that in the Control Group, the total area of bone neoformation was significantly greater (p = 0.009) and grew progressively. The giant cells presented a positive reaction to TRAP but no osteoclasts were observed.

Conclusion

The ceramic cement did not induce or lead to bone neoformation from the microtomographic or histological point of view.

Biologic and clinical aspects of integration of different bone substitutes in oral surgery: a literature review

Many bone substitutes have been proposed for bone regeneration, and researchers have focused on the interactions occurring between grafts and host tissue, as the biologic response of host tissue is related to the origin of the biomaterial. Bone substitutes used in oral and maxillofacial surgery could be categorized according to their biologic origin and source as autologous bone graft when obtained from the same individual receiving the graft; homologous bone graft, or allograft, when harvested from an individual other than the one receiving the graft; animal-derived heterologous bone graft, or xenograft, when derived from a species other than human; and alloplastic graft, made of bone substitute of synthetic origin. The aim of this review is to describe the most commonly used bone substitutes, according to their origin, and to focus on the biologic events that ultimately lead to the integration of a biomaterial with the host tissue.

Socket preservation by beta-tri-calcium phosphate with collagen compared to platelet-rich fibrin: A clinico-radiographic study

Objectives:

This study was primarily designed to determine the clinico-radiographic efficacy of platelet-rich fibrin (PRF) and beta-tri-calcium phosphate with collagen (β-TCP-Cl) in preserving extraction sockets.

Materials and Methods:

For Group I (PRF), residual sockets (n = 15) were filled with autologous PRF obtained from patients' blood; and for Group II (β-TCP-Cl), residual sockets (n = 15) were filled with β-TCP-Cl. For the sockets randomly selected for Group II (β-TCP-Cl), the reshaped Resorbable Tissue Replacement cone was inserted into the socket.

Results:

Clinically, there was a significantly greater decrease in relative socket depth, but apposition in midcrestal height in Group II (β-TCP-Cl) as compared to Group I (PRF), whereas more decrease in buccolingual width of Group I (PRF) than Group II (β-TCP-Cl) after 6 months. Radiographically, the mean difference in socket height, residual ridge, and width (coronal, middle, and apical third of socket) after 6 months was higher in Group I (PRF) as compared to Group II (β-TCP-Cl). The mean density (in Hounsfield Units) at coronal, middle, and apical third of socket was higher in Group I (PRF) as compared to Group II (β-TCP-Cl). There were statistically significant apposition and resorption for Group I (PRF) whereas nonsignificant resorption and significant apposition for Group II (β-TCP-Cl) in buccal and lingual/palatal cortical plate, respectively, at 6 months on computerized tomography scan.

Conclusion:

The use of either autologous PRF or β-TCP-Cl was effective in socket preservation. Results obtained from PRF were almost similar to β-TCP-Cl; therefore being autologous, nonimmune, cost-effective, easily procurable regenerative biomaterial, PRF proves to be an insight into the future biofuel for regeneration.

Combining mesenchymal stem cell sheets with platelet-rich plasma gel/calcium phosphate particles: a novel strategy to promote bone regeneration

Background

Promotion of bone regeneration is important for successful repair of bony defects. This study aimed to investigate whether combining bone marrow-derived mesenchymal stem cell (BMSC) sheets with platelet-rich plasma (PRP) gel/calcium phosphate particles could promote bone formation in the femoral bone defects of rats.

Methods

The proliferation and differentiation of BMSCs or BMSC sheets cultured with calcium phosphate particles and/or PRP were investigated in in vitro. In vivo, 36 2.5 × 5 mm bone defects were randomly divided into groups and treated with either BMSCs/PRP gel, calcium phosphate particles, PRP gel/calcium phosphate particles, a BMSC sheet/calcium phosphate particles, a BMSC sheet/PRP gel/calcium phosphate particles, or were left untreated (n = 6/group). A further 15 bone defects were treated with chloromethyl-benzamidodialkylcarbocyanine (CM-Dil)-labelled BMSC sheet/PRP gel/calcium phosphate particles and observed using a small animal in vivo fluorescence imaging system to trace the implanted BMSCs at 1 day, 3 days, 7 days, 2 weeks, and 4 weeks after surgery.

Results

The expression of collagen type I and osteocalcin genes of BMSCs or BMSC sheets treated with PRP and calcium phosphate particles was significantly higher than that of BMSCs or BMSC sheets treated with calcium phosphate particles or the controls (P <0.05). PRP can promote gene expression of collagen III and tenomodulin by BMSCs and in BMSC sheets. The VEGF, collagen I and osteocalcin gene expression levels were higher in the BMSC sheet than in cultured BMSCs (P <0.05). Moreover, alizarin red staining quantification, ALP quantification and calcein blue fluorescence showed the osteogenic potential of BMSCs treated with PRP and calcium phosphate particles The implanted BMSCs were detectable at 1 day, 3 days, 7 days, 2 weeks and 4 weeks after surgery by a small animal in vivo fluorescence imaging system and were visualized in the defect zones by confocal microscopy. At 4 weeks after implantation, the defects treated with the BMSC sheet/PRP gel/calcium phosphate particles showed significantly more bone formation than the other five groups.

Conclusions

Incorporation of an BMSC sheet into the PRP gel/calcium phosphate particles greatly promoted bone regeneration. These BMSC sheet and tissue engineering strategies offer therapeutic opportunities for promoting bone defect repair clinically.

Mechanisms of in Vivo Degradation and Resorption of Calcium Phosphate Based Biomaterials

Calcium phosphate ceramic materials are extensively used for bone replacement and regeneration in orthopedic, dental, and maxillofacial surgical applications. In order for these biomaterials to work effectively it is imperative that they undergo the process of degradation and resorption in vivo. This allows for the space to be created for the new bone tissue to form and infiltrate within the implanted graft material. Several factors affect the biodegradation and resorption of calcium phosphate materials after implantation. Various cell types are involved in the degradation process by phagocytic mechanisms (monocytes/macrophages, fibroblasts, osteoblasts) or via an acidic mechanism to reduce the micro-environmental pH which results in demineralization of the cement matrix and resorption via osteoclasts. These cells exert their degradation effects directly or indirectly through the cytokine growth factor secretion and their sensitivity and response to these biomolecules. This article discusses the mechanisms of calcium phosphate material degradation in vivo.

Preparation of polyelectrolyte complex nanoparticles of chitosan and poly(2-acry1amido-2-methylpropanesulfonic acid) for doxorubicin release

A new kind of polyelectrolyte complex (PEC) based on cationic chitosan (CS) and anionic poly(2-acry1amido-2-methylpropanesulfonic acid) (PAMPS) was prepared using a polymer-monomer pair reaction system. Chitosan was mixed with 2-acry1amido-2-methylpropanesulfonic acid) (AMPS) in an aqueous solution, followed by polymerization of AMPS. The complex was formed by electrostatic interaction of NH3(+) groups of CS and SO3(-) groups of AMPS, leading to a formation of complex nanoparticles of CS-PAMPS. A series of nanoparticles were obtained by changing the weight ratio of CS to AMPS, the structure and properties of nanoparticles were investigated. It was observed that the nanoparticles possessed spherical morphologies with average diameters from 255 nm to 390 nm varied with compositions of the nanoparticles. The nanoparticles were used as drug vehicles for doxorubicin, displaying relative high drug loading rate and encapsulation rate. The vitro release profiles revealed that the drug release could be controlled by adjusting pH of the release media. The nanoparticles demonstrated apparent advantages such as simple preparation process, free of organic solvents, size controllable, good biodegradability and biocompatibility, and they could be potentially used in drug controlled release field.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.

Effect of microstructure characteristics on tetracalcium phosphate-nanomonetite cement in vitro cytotoxicity

MC3T3E1 murine pre-osteoblastic cells were used to evaluate the cytotoxicity of tetracalcium phosphate (TTCP)-nanomonetite (DCPA) cement. The starting cement powder mixture was prepared by the in situ reaction between TTCP and a diluted solution of orthophosphoric acid in a planetary ball mill. The cements in the form of pressed cement powder mixture discs differ from each other by the method of pre-treatment and degree of the transformation of cement components in phosphate-buffered saline (PBS). For the evaluation of TTCP-DCPA cement to be non-cytotoxic, it was sufficient to apply the short-time soaking in PBS solution, regardless of whether the cement components were completely transformed or not. If the texture motif and hydroxyapatite particle morphology were properly developed during the initial stage of hardening, the cement cytotoxicity or osteoblast proliferation were insignificantly influenced by the soaking time or the texture stability during cell cultivation, but the lattice ordering enhanced cell proliferation. Results showed that the surface texture and the hydroxyapatite particle morphology are crucial for in vitro cement cytotoxicity evaluation.

Porous titanium particles for acetabular reconstruction in total hip replacement show extensive bony armoring after 15 weeks. A loaded in vivo study in 10 goats

BACKGROUND AND PURPOSE

The bone impaction grafting technique restores bone defects in total hip replacement. Porous titanium particles (TiPs) are deformable, like bone particles, and offer better primary stability. We addressed the following questions in this animal study: are impacted TiPs osteoconductive under loaded conditions; do released micro-particles accelerate wear; and are systemic titanium blood levels elevated after implantation of TiPs?

ANIMALS AND METHODS

An AAOS type-III defect was created in the right acetabulum of 10 goats weighing 63 (SD 6) kg, and reconstructed with calcium phosphate-coated TiPs and a cemented polyethylene cup. A stem with a cobalt chrome head was cemented in the femur. The goats were killed after 15 weeks. Blood samples were taken pre- and postoperatively.

RESULTS

The TiP-graft layer measured 5.6 (SD 0.8) mm with a mean bone ingrowth distance of 2.8 (SD 0.8) mm. Cement penetrated 0.9 (0.3-1.9) mm into the TiPs. 1 reconstruction showed minimal cement penetration (0.3 mm) and failed at the cement-TiP interface. There were no signs of accelerated wear, metallic particle debris, or osteolysis. Median systemic titanium concentrations increased on a log-linear scale from 0.5 (0.3-1.1) parts per billion (ppb) to 0.9 (0.5-2.8) ppb (p=0.01).

INTERPRETATION

Adequate cement pressurization is advocated for impaction grafting with TiPs. After implantation, calcium phosphate-coated TiPs were osteoconductive under loaded conditions and caused an increase in systemic titanium concentrations. However, absolute levels remained low. There were no signs of accelerated wear. A clinical pilot study should be performed to prove that application in humans is safe in the long term.

Senescence suppressors: their practical importance in replicative lifespan extension in stem cells

Recent animal and clinical studies report promising results for the therapeutic utilization of stem cells in regenerative medicine. Mesenchymal stem cells (MSCs), with their pluripotent nature, have advantages over embryonic stem cells in terms of their availability and feasibility. However, their proliferative activity is destined to slow by replicative senescence, and the limited proliferative potential of MSCs not only hinders the preparation of sufficient cells for in vivo application, but also draws a limitation on their potential for differentiation. This calls for the development of safe and efficient means to increase the proliferative as well as differentiation potential of MSCs. Recent advances have led to a better understanding of the underlying mechanisms and significance of cellular senescence, facilitating ways to manipulate the replicative lifespan of a variety of primary cells, including MSCs. This paper introduces a class of proteins that function as senescence suppressors. Like tumor suppressors, these proteins are lost in senescence, while their forced expression delays the onset of senescence. Moreover, treatments that increase the expression or the activity of senescence suppressors, therefore, cause expansion of the replicative and differentiation potential of MSCs. The nature of the activities and putative underlying mechanisms of the senescence suppressors will be discussed to facilitate their evaluation.

Morphology effect of bioglass-reinforced hydroxyapatite (Bonelike(®) ) on osteoregeneration

In the last decades, the well-known disadvantages of autografts and allografts have driven to the development of synthetic bone grafts for bone regeneration. Bonelike(®) , a glass-reinforced hydroxyapatite (HA) composite was developed and registered for bone grafting. This biomaterial is composed by a modified HA matrix, with α- and β-tricalcium phosphate secondary phases. Aiming to improve the biological characteristics of Bonelike(®) , new spherical pelleted granules, of different shape and size, were developed with controlled micro and macrostructure. In the present study, it was compared the physicochemical properties and in vivo performance of different Bonelike(®) granule presentations-Bonelike(®) polygonal (500-1000 µm size) and Bonelike spherical (250-500 µm; 500-1000 µm size). For the in vivo study, Bonelike(®) was implanted on sheep femurs, with various implantation times (30 days, 60 days, 120 days, and 180 days). X-ray diffraction analysis revealed that the phase composition of different granules presentations was similar. Bonelike(®) spherical 500-1000 µm was the most porous material (global porosity and intraporosity) and Bonelike(®) polygonal 500-1000 µm the less porous. Considering the in vivo study, both polygonal and spherical granules presented osteoconductive proprieties. The spherical granules showed several advantages, including easier medical application through syringe and improved osteointegration, osteoconduction, and degradation, by the presence of larger pores, controlled micro- and macrosctructure and suitable particle format that adapts to bone growth. Bonelike(®) spherical 500-1000 µm showed improved new bone invasion throughout the material's structure and Bonelike(®) spherical 250-500 µm appeared to induce faster bone regeneration, presenting less unfilled areas and less lacunae in the histological analysis.

Injectable collagen/α-tricalcium phosphate cement: collagen-mineral phase interactions and cell response

A bone inspired material was obtained by incorporating collagen in the liquid phase of an α-tricalcium phosphate cement, either in solubilized or in fibrilized form. This material was able to set in situ, giving rise to a calcium deficient hydroxyapatite (CDHA)/collagen composite. The morphology and distribution of collagen in the composite was shown to be strongly affected by the collagen pre-treatment. The interactions between collagen and the inorganic phase were assessed by FTIR. A red shift of the amide I band was indicative of calcium chelation by the collagen carbonyl groups. The rate of CDHA formation was not affected when diluted collagen solutions (1 mg/ml) were used, whereas injectability improved. The presence of solubilized collagen, even in low amount (1 %), increased cell adhesion and proliferation on the composites. Still in the absence of osteogenic medium, significant ALP activity was detected both in the inorganic and the collagen-containing cements. The maximum ALP activity was advanced in the collagen-containing cement as compared to the inorganic cement.

Polymeric additives to enhance the functional properties of calcium phosphate cements

The vast majority of materials used in bone tissue engineering and regenerative medicine are based on calcium phosphates due to their similarity with the mineral phase of natural bone. Among them, calcium phosphate cements, which are composed of a powder and a liquid that are mixed to obtain a moldable paste, are widely used. These calcium phosphate cement pastes can be injected using minimally invasive surgery and adapt to the shape of the defect, resulting in an entangled network of calcium phosphate crystals. Adding an organic phase to the calcium phosphate cement formulation is a very powerful strategy to enhance some of the properties of these materials. Adding some water-soluble biocompatible polymers in the calcium phosphate cement liquid or powder phase improves physicochemical and mechanical properties, such as injectability, cohesion, and toughness. Moreover, adding specific polymers can enhance the biological response and the resorption rate of the material. The goal of this study is to overview the most relevant advances in this field, focusing on the different types of polymers that have been used to enhance specific calcium phosphate cement properties.

Dicalcium phosphate cements: brushite and monetite

Dicalcium phosphate cements were developed two decades ago and ever since there has been a substantial growth in research into improving their properties in order to satisfy the requirements needed for several clinical applications. The present paper presents an overview of the rapidly expanding research field of the two main dicalcium phosphate bioceramics: brushite and monetite. This review begins with a summary of all the different formulae developed to prepare dicalcium phosphate cements, and their setting reaction, in order to set the scene for the key cement physical and chemical properties, such as compressive and tensile strength, cohesion, injectability and shelf-life. We address the issue of brushite conversion into either monetite or apatite. Moreover, we discuss the in vivo behavior of the cements, including their ability to promote bone formation, biodegradation and potential clinical applications in drug delivery, orthopedics, craniofacial surgery, cancer therapy and biosensors.

Effect of β-tricalcium phosphate coated with zoledronic acid on human osteoblasts and human osteoclasts in vitro

The combination of a bone graft material with bisphosphonates (BPs) might be advantageous for an optimal balance of material resorption and stimulation of bone formation. This study investigated the effect of β-tricalcium phosphate (β-TCP) bone grafts coated with zoledronic acid (ZOL) on osteoblast-like cells and osteoclast-like cells (OLC). As a drug carrier, the polymer poly(D,L-lactide) was used and three different concentrations of ZOL were tested. β-TCP coated with ZOL stimulated the production of osteocalcin (OC), osteoprotegerin, and sRANKL in osteoblast-like cells. The polymer coating alone caused a significant increase in collagen type 1 and OC production. OLC viability was inhibited and the tartrate-resistant acidic phosphatase isoform-5b was significantly decreased after cultivation on polymer-coated β-TCP for 12 days. The three different concentrations of ZOL decreased cell viability and no TRAPiso-5b was detectable, indicating a strong reduction of the TRAPiso-5b after 12 days in culture. After 21 days in culture, only the higher ZOL concentrations significantly reduced cell viability and TRAPiso-5b. The results of this study show that coating of β-TCP with ZOL has stimulating effects on osteoblast-like cells. Additionally, an inhibition of osteoclasts was seen. The combination of this bone grafting material with BPs might, therefore, be effective in the treatment of large bone defects.

Beta-tricalcium phosphate/type I collagen cones with or without a barrier membrane in human extraction socket healing: clinical, histologic, histomorphometric, and immunohistochemical evaluation

The aim of this study was to investigate the healing of human extraction sockets filled with β-tricalcium phosphate and type I collagen (β-TCP/Clg) cones with or without a barrier membrane. Twenty patients were divided in two groups: (A) β-TCP/Clg non-membrane and (B) β-TCP/Clg + barrier membrane. Clinical examination and biopsies from the grafted sites were collected 9 months later. Bone samples were analyzed using histomorphometry and immunohistochemistry. The horizontal dimension of the alveolar ridge was significantly reduced 9 months after socket preservation in the non-membrane group. There was bone formation with no significant differences between the two groups in the areas occupied by new bone (A = 42.4%; B = 45.3%), marrow (A = 42.7%; B = 35.7%), or residual graft (A = 9.7%; B = 12.5%). Immunohistochemistry revealed osteonectin expression in both groups. Both groups demonstrated sufficient amounts of vital bone and socket morphology to support dental implant placement after the 9-month healing period. A future trial to evaluate the alveolar outcomes at an earlier 6-month time point rather than the 9 months used in this study would be of interest.

Porous hydroxyapatite and gelatin/hydroxyapatite microspheres obtained by calcium phosphate cement emulsion

Hydroxyapatite and hybrid gelatine/hydroxyapatite microspheres were obtained through a water in oil emulsion of a calcium phosphate cement (CPC). The setting reaction of the CPC, in this case the hydrolysis of α-tricalcium phosphate, was responsible for the consolidation of the microspheres. After the setting reaction, the microspheres consisted of an entangled network of hydroxyapatite crystals, with a high porosity and pore sizes ranging between 0.5 and 5 μm. The size of the microspheres was tailored by controlling the viscosity of the hydrophobic phase, the rotation speed, and the initial powder size of the CPC. The incorporation of gelatin increased the sphericity of the microspheres, as well as their size and size dispersion. To assess the feasibility of using the microspheres as cell microcarriers, Saos-2 cells were cultured on the microspheres. Fluorescent staining, SEM studies, and LDH quantification showed that the microspheres were able to sustain cell growth. Cell adhesion and proliferation was significantly improved in the hybrid gelatin/hydroxyapatite microspheres as compared to the hydroxyapatite ones.

Rescuing replication and osteogenesis of aged mesenchymal stem cells by exposure to a young extracellular matrix

This study aimed to determine whether aging negatively affects MSC replication and osteogenesis and whether these features could be altered by exposure to an extracellular matrix (ECM) generated by marrow cells from young or old mice. A cell-free ECM was prepared from cultured femoral marrow cells from either 3- or 18-mo-old C57BL/6 mice (young-ECM or old-ECM, respectively). The replication and osteogenesis of young or old MSCs maintained on young-ECM vs. old-ECM as well as plastic were examined in vitro and in vivo. We found that the frequency of MSCs in marrow from old mice, measured by colony-forming cells, was only marginally lower than that of young mice. In contrast, defects in the self-renewal and bone formation capacity of old MSCs were remarkable. These defects were corrected by provision of a young-ECM but not old-ECM. In parallel cultures maintained on a young-ECM, the intracellular levels of reactive oxygen species from both old and young mice were reduced 30-50% compared to those maintained on old-ECM or plastic. We concluded that aging negatively affects the formation of an ECM that normally preserves MSC function, and aged MSCs can be rejuvenated by culture on a young-ECM.

Calcium Phosphate Bone Cements Including Sugar Surfactants: Part Two-Injectability, Adhesive Properties and Biocompatibility

Addition of sugar surfactants, sucrose fatty acid esters and alkylpolyglucosides to a calcium phosphate cement, designed for bone reconstruction, is described. Thanks to their adsorption at the surface of the calcium phosphate particles, the sugar surfactants allowed a full injectability and brought a very good workability. Injectability was measured by monitoring force-distance curves. With some of the selected sugar surfactants adhesive properties of the cement pastes were also observed, which were measured by tack tests. Finally, some properties related to biological applications are described, including gentamicine release and osteoblast viability experiments. The whole study demonstrates that addition of these mild surfactants improved several properties of the calcium phosphate cement, without impairing function.

Calcium Phosphate Bone Cements Including Sugar Surfactants: Part One-Porosity, Setting Times and Compressive Strength

Addition of sugar surfactants, sucrose fatty acid esters and alkylpolyglucosides, to calcium phosphate cement designed for bone reconstruction is described. Thanks to their surface activity and through their adsorption at the surface of the calcium phosphate particles, they both induced a strong increase in the porosity (quantified by Image Analysis) and brought a very good workability. Other properties typically studied for these cements are reported, including setting times, compressive strength, cohesion in water, and effect of sterilization on these properties. The whole study brought good insight in the interest of adding these mild surfactants to improve several properties of the calcium phosphate cement, without impairing their function.

Bactericidal and biocompatible properties of TiN/Ag multilayered films by ion beam assisted deposition

Nanoscale TiN/Ag multilayered films of thickness 500 nm were synthesized on AISI317 stainless steel by ion beam assisted deposition (IBAD) with the modulation period of 4, 5, 6, 7.5, and 12 nm. The bactericidal and biocompatible properties of TiN/Ag multilayered films were investigated through Gram negative E. coli bacteria and L929 cells (mice fibroblast) as well as human umbilical vein endothelial cells (HUVEC). The results show that the TiN/Ag multilayered films with the modulation period of 7.5 nm possess the strongest bactericidal property. The cytotoxicity grade of TiN/Ag multilayered coating with the modulation periods of 7.5 nm, 12 nm is in 0-1 scope, which indicates this film has no cytotoxicity to L929. HUVEC on TiN/Ag multilayered film grows well and shows good cellularity. Auger electronic spectroscopy reveals the relationship between the structure of TiN/Ag multilayered film and the biomedical properties.

Calcium phosphate-based particles influence osteogenic maturation of human mesenchymal stem cells

Biphasic calcium phosphates (BCPs) consist of a mixture of hydroxyapatite and beta-tricalcium phosphate and are recommended as alternatives or additives to autogenous bone for orthopaedic and dental applications. There is clinical evidence showing particle release from bioceramics, which might impair the ability of human mesenchymal stem cells (hMSC) from bone marrow to proliferate or mature into a functional osteoblast phenotype. This study analyses the influence of BCP particles and their precursors, calcium-deficient apatite (CDA) particles, on in vitro hMSC behaviour. Both types of particles were efficiently internalized by hMSC. Cell viability, morphology and actin cytoskeleton reorganization were unaffected by exposure of hMSC to BCP or CDA particles. Direct exposure to BCP particles impaired hMSC osteogenic differentiation and bone matrix mineralization to a lesser extent than CDA, as assayed by evaluation of alkaline phosphatase activity, osteopontin secretion and mineralized nodule formation. The ability of bioceramic particles to affect osteogenic maturation through modification of soluble factors in media was assayed in an in vitro system that avoids direct cell-particle contact. Indirect exposure to CDA particles severely impaired hMSC osteogenic maturation owing to the uptake of Ca2+ from the culture media. Lower textural properties of BCP and the lack of calcium deficiency in its composition prevented Ca2+ uptake, allowing the development of a functional osteoblast phenotype.

Injectable iron-modified apatitic bone cement intended for kyphoplasty: cytocompatibility study

In this study, the cytocompatibility of human ephitelial (HEp-2) cells cultured on new injectable iron-modified calcium phosphate cements (IM-CPCs) has been investigated in terms of cell adhesion, cell proliferation, and morphology. Quantitative MTT-assay and scanning electron microscopy (SEM) showed that cell adhesion and viability were not affected with culturing time by iron concentration in a dose-dependent manner. SEM-cell morphology showed that HEp-2 cells, seeded on IM-CPCs, were able to adhere, spread, and attain normal morphology. These results showed that the new injectable IM-CPCs have cytocompatible features of interest to the intended kyphophasty application, for the treatment of osteoporotic vertebral compression fractures.

Soft tissue necrosis following using calcium phosphate cement in calcaneal bone cyst: case report

Calcium phosphate cements have received widespread attention for their possible role as bone-grafting material and bone fillers in skeletal defects. They were evaluated as a biomaterial in many aspects. No serious harmful effects such as foreign body reaction and tissue necrosis against to calcium phosphate cements have been reported yet. They were accepted as highly biocompatible materials. In this paper, we represent a patient who had soft tissue necrosis around lateral malleolar region, following using percutaneous calcium phosphate cement as a filler bone substitute in calcaneus bone cyst. The possible mechanisms were discussed.

A review of bone substitutes

The use of bone grafts in the repair of defects has a long history of success, primarily with the use of autologous bone. With increasing technologic advances, researchers have been able to broaden the spectrum of grafting materials to allografts, xenografts, and synthetic materials, which provide the surgeon and patient with options, each with unique advantages. It is with the knowledge of each material that the clinician can present and suggest the best material and tailor treatment plans to fit each individual. In this article, we present an overview of the principles of bone grafting, the types of graft materials available, and an outlook to what the future holds in this area of medicine and dentistry.