Hydrolytically active Eu(III) and Ce(IV) EF-hand peptides

Mononuclear binding and catalytic activity of europium(III) and gadolinium(III) at the active site of the model metalloenzyme phosphotriesterase

Lanthanide ions have ideal chemical properties for catalysis, such as hard Lewis acidity, fast ligand-exchange kinetics, high coordination-number preferences and low geometric requirements for coordination. As a result, many small-molecule lanthanide catalysts have been described in the literature. Yet, despite the ability of enzymes to catalyse highly stereoselective reactions under gentle conditions, very few lanthanoenzymes have been investigated. In this work, the mononuclear binding of europium(III) and gadolinium(III) to the active site of a mutant of the model enzyme phosphotriesterase are described using X-ray crystallography at 1.78 and 1.61 Å resolution, respectively. It is also shown that despite coordinating a single non-natural metal cation, the PTE-R18 mutant is still able to maintain esterase activity.

Clickable polymer scaffolds enable Ce recovery with peptide ligands

Rare earth elements (REEs) are a vital part of many technologies with particular importance to the renewable energy sector and there is a pressing need for environmentally friendly and sustainable processes to recover and recycle them from waste streams. Functionalized polymer scaffolds are a promising means to recover REEs due to the ability to engineer both transport properties of the porous material and specificity for target ions. In this work, REE adsorbing polymer scaffolds were synthesized by first introducing poly(glycidyl methacrylate) (GMA) brushes onto porous polyvinylidene fluoride (PVDF) surface through activator generated electron transfer atom transfer radical polymerization (AGET ATRP). Azide moieties were then introduced through a ring opening reaction of GMA. Subsequently, REE-binding peptides were conjugated to the polymer surface through copper catalyzed azide alkyne cycloaddition (CuAAC) click chemistry. The presence of GMA, azide, and peptide was confirmed through Fourier transform infrared spectroscopy. Polymer scaffolds functionalized with the REE-binding peptide bound cerium, while polymer scaffolds functionalized with a scrambled control peptide bound significantly less cerium. Importantly, this study shows that the REE binding peptide retains its functionality when bound to a polymer surface. The conjugation strategy employed in this work can be used to introduce peptides onto other polymeric surfaces and tailor surface specificity for a wide variety of ions and small molecules.

Tuning Cerium(IV)-Assisted Hydrolysis of Phosphatidylcholine Liposomes under Mildly Acidic and Neutral Conditions

With the goal of designing a lysosomal phospholipase mimic, we optimized experimental variables to enhance Ce(IV) -assisted hydrolysis of phosphatidylcholine (PC) liposomes. Our best result was obtained with the chelating agent bis-tris propane (BTP). Similar to the hydrolytic enzyme, Ce(IV) -assisted hydrolysis of PC phosphate ester bonds was higher at lysosomal pH (∼4.8) compared to pH 7.2. In the presence of BTP, the average cleavage yield at ∼pH 4.8 and 37 °C was: 67±1 %, 5.7-fold higher than at ∼pH 7.2 and roughly equivalent to the percent of phospholipid found on the metal-accessible exo leaflet of small liposomes. No Ce(IV) precipitation was observed. When BTP was absent, there was significant turbidity, and the amount of cleavage at ∼pH 4.8 (69±1 %) was 2.1-fold higher than the yield obtained at ∼pH 7.2. Our results show that BTP generates homogenous solutions of Ce(IV) that hydrolyze phosphatidylcholine with enhanced selectivity for lysosomal pH.

Ca 2+-induced self-assembly in designed peptides with optimally spaced gamma-carboxyglutamic acid residues

We have previously elucidated a new paradigm for the metal ion-induced helix-helix assembly in the natural γ-carboxyglutamic acid (Gla)-containing class of conantokin (con) peptides, typified by con-G and a variant of con-T, con-T[K7Gla], independent of the hydrophobic effect. In these "metallo-zipper" structures, Gla residues spaced at i, i+4, i+7, i+11 intervals, which is similar to the arrangement of a and d residues in typical heptads of coiled-coils, coordinate with Ca(2+) and form specific antiparallel helical dimers. In order to evaluate the common role of Gla residues in peptide self-assembly, we extend herein the same Gla arrangement to designed peptides: NH(2)-(γLSγEAK)(3)-CONH(2) (peptide 1) and NH(2)-γLSγEAKγLSγQANγLSγKAE-CONH(2) (peptide 2). Peptide 1 and peptide 2 exhibit no helicity alone, but undergo structural transitions to helical conformations in the presence of a variety of divalent cations. Sedimentation equilibrium ultracentrifugation analyses showed that peptide 1 and peptide 2 form helical dimers in the presence of Ca(2+), but not Mg(2+). Folding and thiol-disulfide rearrangement assays with Cys-containing peptide variants indicated that the helical dimers are mixtures of antiparallel and parallel dimers, which is different from the strict antiparallel strand orientations of con-G and con-T[K7γGla] dimers. These findings suggest that the Gla arrangement, i, i+4, i+7, i+11, i+14, plays a key role in helix formation, without a strict adherence to strand orientation of the helical dimer.

Of Folding and Function: Understanding Active-Site Context through Metalloenzyme Design

In the emerging field of biomolecular design, the introduction of metal-binding sites into loop or turn regions of known protein scaffolds has been utilized to create unique metalloprotein and metallopeptide systems for study. This Forum Article highlights examples of the modular-turn-substitution approach to design and the range of structural and mechanistic questions to which this tool can be applied. Examples from the authors' laboratory are given to show that lanthanide-binding metallopeptides, and now a full metallohomeodomain, can be generated by modular substitution of a Ca-binding EF-hand loop into the unrelated scaffold, the engrailed helix-turn-helix motif. We have previously shown that these peptides bind trivalent Ln(III) ions and promote DNA and phosphate hydrolysis, the targeted function. Here, a series of chimeric peptides are presented that differ only in the ninth loop position [given in parentheses; Peptides P3N (Asn), P3E (Glu), P3A (Ala), and P3W(D) (Asp]. This residue, a putative second-shell ligand stabilizing a coordinated water, was found to influence not only metal affinity but also peptide folding. The affinity for Tb(III) was determined by Trp-Tb fluorescence resonance energy transfer and followed the order Ka = P3W(D) > P3A approximately P3E > P3N. However, circular dichroism (CD) titrations with EuCl3 showed that only P3W(D) and P3N folded to any extent upon metal binding, indicating that the Asp/Asn side chains stabilize the central loop structure and thus propagate folding of the peripheral helices, whereas neither Ala nor Glu appears to be interacting with the metal to organize the loop. Finally, we investigated the longer range context of a given loop substitution by cloning and expressing a lanthanide-binding homeodomain (C2), whose loop insertion sequence is analogous to that of peptide P3W(D). We find by CD that apo-C2 has a significant helical structure (approximately 25% alphahelicity), which increases further upon the addition of Tb(III) (approximately 32% alpha helicity). The protein's Tb(III) affinity is similar to that of the chimeric peptides. However, unlike previously reported metallopeptides, we find that EuC2 does not appreciably promote phosphate or DNA cleavage, which suggests a difference in metal accessibility in the context of the full domain. We have demonstrated that substituting beta turns with metal-binding turns does not necessarily require homologous parental scaffolds or small flexible peptides but rather relies on the structural similarity of the motifs flanking the turn.

Sequence preference in DNA binding: de novo designed helix–turn–helix metallopeptides recognize a family of DNA target sites

The DNA-binding behavior and target sequences of two designed metallopeptides have been investigated with an iterative electrophoresis mobility shift assay followed by PCR amplification, and by circular dichroism spectroscopy. Peptides P3W and P5b were designed based on the structural similarity of the helix-turn-helix motif of homeodomains and the EF-hand motifs of calmodulin, as previously described for P3W. Like P3W, P5b binds both Eu(III) (K(d) = 12.6 +/- 1.9 microM) and Ca(II) (K(d) = 70 +/- 8 microM) with reasonable affinity. Binding selection from a library of randomized 8-mer DNA oligonucleotide sequences identified one target family for CaP5b [5'-pur-T-pur-G-(G/C)-3'], and two target sites for CaP3W [5'-(A/T)-G-G-G-(T/C)-3' and 5'-A-T-(G/T)-T-G-3']. Circular dichroism studies indicate that unlike EuP3W, EuP5b is poorly folded in the absence of DNA. In the presence of DNA containing target-binding sites for both peptides, both EuP3W and EuP5b increase in helical content, in the latter case significantly. These results suggest that EuP5b binding to target DNA involves an induced-fit mechanism. These small chimeric metallopeptides have been found to bind selectively to DNA targets, analogous to natural protein-DNA interactions. This corroborates our earlier conclusions (J. Am. Chem. Soc. 125:6656, 2003) that sequence-preferential DNA cleavage by Ce(IV)P3W was due to sequence recognition.

Responsive lanthanide luminescent cyclen complexes: from switching/sensing to supramolecular architectures

This article highlights some of the recent developments in the use of responsive cyclen based lanthanide luminescent devices, focusing on Eu(III), Tb(III), Nd(III) and Yb(III) complexes, where the photophysical properties, such as the excited state lifetimes, quantum yield/intensity and emission polarisation are modulated by the local chemical environment, e.g. ions and molecules, or through self-assembly of either f-f or mixed f-d cyclen complexes.

Kinetics of phosphodiester cleavage by differently generated cerium(iv) hydroxo species in neutral solutions

Neutral aqueous solutions of cerium ammonium nitrate obtained by dilution of their acetonitrile stock solution with imidazole buffer show high catalytic activity in the hydrolysis of bis(p-nitrophenyl) phosphate (BNPP) and better reproducibility than other similar systems, but suffer from low stability. The kinetics of catalytic hydrolysis is second-order in Ce(IV), independent of pH in the range 5-8 and tentatively involves the Ce2(OH)7+ species as the active form. Attempts to stabilize the active species by different types of added ligands failed, but the use of Ce(IV) complexes pre-synthesized in an organic solvent with potentially stabilizing ligands as precursors of active hydroxo species appeared to be more successful. Three new Ce(IV) complexes, [Ce(Phen)2O(NO3)2], [Ce(tris)O(NO3)(OH)] and [Ce(BTP)2(NO3)4].2H2O (BTP = bis-tris propane, 1,3-bis[tris(hydroxymethyl)methylamino]propane), were prepared by reacting cerium ammonium nitrate with the respective ligands in acetonitrile and were characterized by analytical and spectroscopic techniques. Aqueous solutions of these complexes undergo rapid hydrolysis producing nearly neutral polynuclear Ce(IV) oxo/hydroxo species with high catalytic activity in BNPP hydrolysis. Potentiometric titrations of the solutions obtained from the complex with BTP revealed the formation of Ce4(OH)15+ species at pH > 7, which are protonated affording Ce4(OH)14(2+) and then Ce4(OH)13(3+) on a decrease in pH from 7 to 5. The catalytic activity increases strongly on going to species with a higher positive charge. The reaction mechanism involves first- and second-order in catalyst paths as well as intermediate complex formation with the substrate for higher charged species.

De Novo Design of a Copper(II)-Binding Helix−Turn−Helix Chimera: The Prion Octarepeat Motif in a New Context

A chimeric Cu-binding peptide has been designed on the basis of a turn substitution of the prion (PrP) octarepeat Cu-binding site into the engrailed homeodomain helix-turn-helix motif (HTH). This system is a model for the investigation of a single PrP Cu-binding site in a defined protein context. The 28-mer Cu-HTH peptide P7 spectroscopically mimics the PrP octarepeat (P7 = TERRRQQLSHGGGWGEAQIKIWFQNKRA). The Cu(II)-binding affinity of P7 was determined by ESI-MS and tryptophan fluorescence titrations to be K(d) = 2.5 +/- 0.7 microM at pH = 7.0. The quenching of fluorescence of the Trp within the binding loop (underlined above) is pH dependent and highly specific for Cu(II). No Trp quenching was observed in the presence of divalent Zn, Mn, Co, Ni, or Ca ions, and ESI-MS titrations confirmed that these divalent ions do not appreciably bind to P7. The EPR spectrum of Cu(II)-P7 shows that the Cu environment is axial and consistent with 6-coordinate N(3)O(H(2)O)(2) or N(4)(H(2)O)(2) coordination (A( parallel) = 172 x10(-)(4) cm(-)(1); g( parallel) = 2.27), very similar to that of the PrP octarepeat itself. Also like PrP, circular dichroism studies show that apo P7 is predominantly disordered in solution, and the structure is slightly enhanced by Cu binding. These data show the Cu-PrP HTH peptide reproduces the Cu-binding behavior of a single PrP octarepeat in a new context.

Europium Luminescence of EF-Hand Helix−Turn−Helix Chimeras: Impact of pH and DNA-Binding on Europium Coordination

A series of Eu(III) metallopeptides, designed on the basis of the structural similarity of the helix-turn-helix and EF-hand motifs, have been studied by Eu(III) (7)F(0) --> (5)D(0) excitation spectroscopy. The impact of EF-hand ligand set differences on the hydration number and Eu(III) coordination environment are compared among the peptides. The conditional binding affinities were determined by Eu titration (P3, log K(a) = 6.0 +/- 0.4; P3W, log K(a) = 5.9 +/- 0.2; P5b, log K(a) = 5.3 +/- 0.1). Two similar coordination environments occur in each case, consistent with structural flexibility about the metal site. The coordination environments are consistent with 8- or 9-coordinate Eu(III), including six peptide-based ligands and two to three water molecules (P3, q = 1.9 +/- 0.2; P3W, q = 2.3 +/- 0.2; P4a, q = 1.9 +/- 0.3; P5b, q = 2.6 +/- 0.2). The Eu(III) (7)F(0) --> (5)D(0) excitation spectra are pH-dependent, as reported for several EF-hand proteins (oncomodulin, parvalbumin). A higher energy transition occurs at pH > 6, and has been assigned to deprotonation of coordinated water. The pK(a) leading to this new transition is dependent on Eu(III) Lewis acidity, which varies with the inner and outer sphere ligand set. The noncoordinating ninth position of the Eu-binding loop, which is poised to make second-sphere contacts to the coordinated water, stabilizes the deprotonated form of the coordinated solvent more effectively when it is Thr (P5b) than Asp (P3W). Upon DNA-binding by the metallopeptides, the pK(a) of the pH-dependent peak increases, but no new DNA-dependent transitions are observed. This indicates no DNA-based Eu(III) ligands are introduced, such as phosphate oxygen atoms of the DNA backbone. The hydration number decreases in the presence of DNA (P3W + DNA, q = 1.9 +/- 0.2; P5b + DNA, q = 1.7 +/- 0.2), indicating that DNA-binding by the metallopeptides organizes rather than compromises the Eu-binding site within the peptide.

Sequence-selective DNA cleavage by a chimeric metallopeptide

A chimeric metallopeptide derived from the sequences of two structurally superimposable motifs was designed as an artificial nuclease. Both DNA recognition and nuclease activity have been incorporated into a small peptide sequence. P3W, a 33-mer peptide comprising helices alpha2 and alpha3 from the engrailed homeodomain and the consensus EF-hand Ca-binding loop binds one equivalent of lanthanides or calcium and folds upon metal binding. The conditional formation constants (in the presence of 50 mM Tris) of P3W for Eu(III) (K(a) = (2.1 +/- 0.1) x 10(5) M(-1)) and Ce(IV) (K(a) = (2.6 +/- 0.1) x 10(5) M(-1)) are typical of isolated EF-hand peptides. Circular dichroism studies show that 1:1 CeP3W is 26% alpha-helical and EuP3W is up to 40% alpha-helical in the presence of excess metal. The predicted helicity of the folded peptide based on helix length and end effects is about 50%, showing the metallopeptides are significantly folded. EuP3W has considerably more secondary structure than our previously reported chimeras (Welch, J. T.; Sirish, M.; Lindstrom, K. M.; Franklin, S. J. Inorg. Chem. 2001, 40, 1982-1984). Eu(III)P3W and Ce(IV)P3W nick supercoiled DNA at pH 6.9, although EuP3W is more active at pH 8. CeP3W cleaves linearized, duplex DNA as well as supercoiled plasmid. The cleavage of a 5'-(32)P-labeled 121-mer DNA fragment was followed by polyacrylamide gel electrophoresis. The cleavage products are 3'-OPO(3) termini exclusively, suggesting a regioselective or multistep mechanism. In contrast, uncomplexed Ce(IV) and Eu(III) ions produce both 3'-OPO(3) and 3'-OH, and no evidence of 4'-oxidative cleavage termini with either metal. The complementary 3'-(32)P-labeled oligonucleotide experiment also showed both 5'-OPO(3) and 5'-OH termini were produced by the free ions, whereas CeP3W produces only 5'-OPO(3) termini. In addition to apparent regioselectivity, the metallopeptides cut DNA with modest sequence discrimination, which suggests that the HTH motif binds DNA as a folded domain and thus cleaves selected sequences. The de novo artificial nuclease LnP3W represents the first small, underivatized peptide that is both active as a nuclease and sequence selective.

Lanthanide-binding helix-turn-helix peptides: solution structure of a designed metallonuclease

A designed lanthanide-binding chimeric peptide based on the strikingly similar geometries of the EF-hand and helix-turn-helix (HTH) motifs was investigated by NMR and CD spectroscopy and found to retain the same overall solution structure of the parental motifs. CD spectroscopy showed that the 33-mer peptide P3W folds on binding lanthanides, with an increase in alpha-helicity from 20% in the absence of metal to 38% and 35% in the presence of excess Eu(III) and La(III) ions, respectively. The conditional binding affinities of P3W for La(III) (5.9 +/- 0.3 microM) and for Eu(III) (6.2 +/- 0.3 microM) (pH 7.8, 5 mM Tris) were determined by tryptophan fluorescence titration. The La(III) complex of peptide P3, which differs from P3W by only one Trp-to-His substitution, has much less signal dispersion in the proton NMR spectra than LaP3W, indicating that the Trp residue is a critical hydrophobic anchor for maintaining a well-folded helix-turn-helix structure. A chemical-shift index analysis indicates the metallopeptide has a helix-loop-helix secondary structure. A structure calculated by using nuclear Overhauser effect and other NMR constraints reveals that P3W not only has a tightly folded metal-binding loop but also retains the alpha-alpha corner supersecondary structure of the parental motifs. Although the solution structure is undefined at both the N and C termini, the NMR structure confirms the successful incorporation of a metal-binding loop into a HTH sequence.