Extraction of organic pollutants from environmental matrices: selection of extraction technique

Advances in the Utilization of Tea Polysaccharides: Preparation, Physicochemical Properties, and Health Benefits

Tea polysaccharide (TPS) is the second most abundant ingredient in tea following tea polyphenols. As a complex polysaccharide, TPS has a complex chemical structure and a variety of bioactivities, such as anti-oxidation, hypoglycemia, hypolipidemic, immune regulation, and anti-tumor. Additionally, it shows excellent development and application prospects in food, cosmetics, and medical and health care products. However, numerous studies have shown that the bioactivity of TPS is closely related to its sources, processing methods, and extraction methods. Therefore, the authors of this paper reviewed the relevant recent research and conducted a comprehensive and systematic review of the extraction methods, physicochemical properties, and bioactivities of TPS to strengthen the understanding and exploration of the bioactivities of TPS. This review provides a reference for preparing and developing functional TPS products.

Method for extraction and analysis of per- and poly-fluoroalkyl substances in contaminated asphalt

The legacy use of aqueous film-forming foam (AFFF) has led to the generation of large volumes of per- and poly-fluoroalkyl substances (PFAS)-contaminated asphalt materials, especially at airports and fire training areas. The management of such PFAS-contaminated asphalt materials requires an understanding of PFAS concentrations in these materials. This study, therefore, aimed to develop a suitable extraction methodology for the analysis of 22 target PFAS (i.e., carboxylic acids, sulfonic acids and fluorotelomers) in asphalt materials. A series of experiments was conducted to optimise extraction solvent composition, as well as to assess the performance of the chosen method under various conditions (i.e., sonication temperature, PFAS contamination level, asphalt core composition and timing of stable isotope addition used as internal standard). The methanol-based extractants performed best due to their accuracy and precision, which were within the acceptable range (extraction efficiency between 70 and 130% and RSD < 20%). The method which involved three successive extractions with methanol/1% NH₃ by ultrasonication at 25 °C was selected due to its performance and ease of operation. The mean recovery of a vast majority of PFAS was found to be in the acceptable range. Tests on the timing of addition of stable isotope (SI)-labelled PFAS internal standards indicate that the recoveries obtained, regardless of when the stable isotopes were added, were within the acceptable range for PFAS. The accuracy and precision of PFAS recoveries were not affected by PFAS spike level (2 μg kg^-1 and 200 μg kg^-1), as well as sample composition (based on the location of asphalt material in the field). Low RSDs were achieved for asphalt cores collected from a contaminated site covering a wide range of concentrations (from LOQ to 2135 mg kg^-1), demonstrating the suitability of the sample preparation method for real-world samples. The results from the interlaboratory testing were also in good agreement and validated the proposed PFAS extraction and analytical approach.

Advances in pretreatment and analysis methods of aromatic hydrocarbons in soil

Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.

Advanced Gel Permeation Chromatography system with increased loading capacity: Polycyclic aromatic hydrocarbons detection in olive oil as a case of study

Gel permeation chromatography (GPC) is herein used as size exclusion clean-up technique for highly sensitive and straightforward detection of Polycyclic Aromatic Hydrocarbons (PAHs) in olive oil samples. An advanced chromatographic system has been developed to isolate a series of PAHs with cancerogenic potential, including PAH4 (benzo(a)pyrene BaP, benzo(a)anthracene BaA, benzo(b)fluoranthene BbF and chrysene Chry) reported in the European Regulation. The system avails of two glass chromatographic columns and a switching valve, that allow removal of interfering analytes in olive oil without resorting to any preliminary extraction process. A seven-fold increase of the loaded sample amount versus conventional chromatographic systems (1 g vs 0.150 g) has been pursued, as well as improved PAHs detection and quantification limits (LOD-LOQ for PAH4: 0.21-0.70 ng/g for BaA, 0.26-0.86 ng/g for Chry, 0.23-0.76 ng/g for BbF, 0.32-1.06 ng/g for BaP), in accordance with the continuous need of more and more reducing these limits in food analysis by the European Regulation. The protocol developed represents a highly innovative and efficient analytical method for organic pollutants in complex biological matrices as olive oil, that can have huge impact on technology for PAHs detection in food samples, being suitable for both industrial and small-scale laboratories.

Design, Simulation, and Environmental Assessment of an Adsorption-Based Treatment Process for the Removal of Polycyclic Aromatic Hydrocarbons (PAHs) from Seawater and Sediments in North Colombia

The presence of marine pollution in Cartagena Bay (Colombia) is an alarming environmental issue because of the ecotoxicological properties of contaminants such as polycyclic aromatic hydrocarbons (PAHs) that may affect the biodiversity of coastal ecosystems. In this sense, there is a need to propose alternatives to remediate the environmental pollution of such bodies of water. The aim of this work was to design an adsorption-based treatment process for the removal of PAHs from seawater and sediments. Two design cases were considered: (i) a base process without a PAH desorption unit and (ii) an alternative process including a PAH desorption unit. Both designs were simulated using Aspen Plus to obtain mass and energy balances. A parametric sensitivity analysis was carried out to determine optimum operating conditions for solvent recovery and treatment efficiency. The pressure and temperature of evaporators were selected as key parameters, as well as PAH loads in the influent. The environmental performance of base and alternative designs was also evaluated via waste reduction algorithm (WAR) methodology. A maximum recovered solvent flow rate was found when the evaporator operates at 56 °C and 0.81-0.83 atm. In addition, the total generation rate of potential environmental impacts (PEI) reported negative values for cases 1, 3, and 4 (-9.80 × 10^-1, -9.25 × 10⁺¹, -1.19 × 10⁺¹, and 1.04 × 10⁺¹ PEI/h). The major concern derived from this analysis is the high environmental impacts reached by the photochemical oxidation potential (PCOP) category associated with the use of hexane and acetone as solvents during PAH removal from sediments. In general, both designs of seawater and sediment treatment seem to be an environmentally friendly alternative for marine pollution remediation.

Opportunistic Bacteria Dominate the Soil Microbiome Response to Phenanthrene in a Microcosm-Based Study

Bioremediation offers a sustainable approach for removal of polycyclic aromatic hydrocarbons (PAHs) from the environment; however, information regarding the microbial communities involved remains limited. In this study, microbial community dynamics and the abundance of the key gene (PAH-RHDα) encoding a ring hydroxylating dioxygenase involved in PAH degradation were examined during degradation of phenanthrene in a podzolic soil from the site of a former timber treatment facility. The 10,000-fold greater abundance of this gene associated with Gram-positive bacteria found in phenanthrene-amended soil compared to unamended soil indicated the likely role of Gram-positive bacteria in PAH degradation. In contrast, the abundance of the Gram-negative PAHs-RHDα gene was very low throughout the experiment. While phenanthrene induced increases in the abundance of a small number of OTUs from the Actinomycetales and Sphingomonadale, most of the remainder of the community remained stable. A single unclassified OTU from the Micrococcaceae family increased ~20-fold in relative abundance, reaching 32% of the total sequences in amended microcosms on day 7 of the experiment. The relative abundance of this same OTU increased 4.5-fold in unamended soils, and a similar pattern was observed for the second most abundant PAH-responsive OTU, classified into the Sphingomonas genus. Furthermore, the relative abundance of both of these OTUs decreased substantially between days 7 and 17 in the phenanthrene-amended and control microcosms. This suggests that their opportunistic phenotype, in addition to likely PAH-degrading ability, was determinant in the vigorous growth of dominant PAH-responsive OTUs following phenanthrene amendment. This study provides new information on the temporal response of soil microbial communities to the presence and degradation of a significant environmental pollutant, and as such has the potential to inform the design of PAH bioremediation protocols.

Polysaccharides from Traditional Chinese Medicines: Extraction, Purification, Modification, and Biological Activity

Traditional Chinese Medicine (TCM) has been used to treat diseases in China for thousands of years. TCM compositions are complex, using as their various sources plants, animals, fungi, and minerals. Polysaccharides are one of the active and important ingredients of TCMs. Polysaccharides from TCMs exhibit a wide range of biological activities in terms of immunity- modifying, antiviral, anti-inflammatory, anti-oxidative, and anti-tumor properties. With their widespread biological activities, polysaccharides consistently attract scientist's interests, and the studies often concentrate on the extraction, purification, and biological activity of TCM polysaccharides. Currently, numerous studies have shown that the modification of polysaccharides can heighten or change the biological activities, which is a new angle of polysaccharide research. This review highlights the current knowledge of TCM polysaccharides, including their extraction, purification, modification, and biological activity, which will hopefully provide profound insights facilitating further research and development.

Distribution of polycyclic aromatic hydrocarbons in sediments of Akaki River, Lake Awassa, and Lake Ziway, Ethiopia

The quantification of 14 polycyclic aromatic hydrocarbons (PAHs) was carried out in sediment samples collected from Akaki River, Lake Awassa, and Lake Ziway, Ethiopia. The concentration of PAHs in the samples was determined using gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode, after microwave-assisted extraction (MAE), using acetone/n-hexane (1:1, v/v) mixture. The accuracy of the method was determined by extracting and analyzing New York/New Jersey waterway sediment standard reference material (SRM 1944). The measured concentrations of PAHs in SRM 1944 agreed well with the certified values. In samples from Akaki River, Lake Awassa, and Lake Ziway, the total content of PAHs determined ranged from 0 to 3070 ng/g (average 534 ng/g), 24.9 to 413 ng/g (average 169 ng/g), and 15.0 to 305 ng/g (average 175 ng/g), respectively. Source ratios indicated that the PAHs were mainly from petrogenic origin. Sediments from all sampling sites indicated negligible levels of toxicity with no risk of adverse biological effects.

Microwave-Assisted Extraction of Fucoidan from Marine Algae

Microwave-assisted extraction (MAE) is a technique that can be applied to extract compounds from different natural resources. In this chapter, the use of this technique to extract fucoidan from marine algae is described. The method involves a closed MAE system, ultrapure water as extraction solvent, and suitable conditions of time, pressure, and algal biomass/water ratio. By using this procedure under the specified conditions, the penetration of the electromagnetic waves into the material structure occurs in an efficient manner, generating a distributed heat source that promotes the fucoidan extraction from the algal biomass.

Comparative metatranscriptomics reveals widespread community responses during phenanthrene degradation in soil

Soil microbial community response to phenanthrene was evaluated by metatranscriptomics. A marked increase in transcripts involved in aromatic compound metabolism, respiration and stress responses, and concurrent decreases in virulence, carbohydrate, DNA metabolism and phosphorus metabolism transcripts was revealed. Phenanthrene addition led to a 1.8-fold to 33-fold increase in the abundance of dioxygenase, stress response and detoxification transcripts, whereas those of general metabolism were little affected. Heavy metal P-type ATPases and thioredoxin transcripts were more abundant in the phenanthrene-amended soil, and this is the first time these proteins have been associated with polycyclic aromatic hydrocarbon (PAH) stress in microorganisms. Annotation with custom databases constructed with bacterial or fungal PAH metabolism protein sequences showed that increases in PAH-degradatory gene expression occurred for all gene groups investigated. Taxonomic determination of mRNA transcripts showed widespread changes in the bacteria, archaea and fungi, and the actinobacteria were responsible for most of the de novo expression of transcripts associated with dioxygenases, stress response and detoxification genes. This is the first report of an experimental metatranscriptomic study detailing microbial community responses to a pollutant in soil, and offers information on novel in situ effects of PAHs on soil microbes that can be explored further.

Removal of polycyclic aromatic hydrocarbons from soil: a comparison between bioremoval and supercritical fluids extraction

Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic substances which are resistant to environmental degradation due to their highly hydrophobic nature. Soils contaminated with PAHs pose potential risks to human and ecological health, therefore concern over their adverse effects have resulted in extensive studies on their removal from contaminated soils. The main purpose of this study was to compare experimental results of PAHs removal, from a natural certified soil polluted with PAHs, by biological methods (using bioaugmentation and biostimulation in a solid-state culture) with those from supercritical fluid extraction (SFE), using supercritical ethane as solvent. The comparison of results between the two methods showed that maximal removal of naphthalene, acenaphthene, fluorene, and chrysene was performed using bioremediation; however, for the rest of the PAHs considered (fluoranthene, pyrene, and benz(a)anthracene) SFE resulted more efficient. Although bioremediation achieved higher removal ratios for certain hydrocarbons and takes advantage of the increased rate of natural biological processes, it takes longer time (i.e. 36 d vs. half an hour) than SFE and it is best for 2-3 PAHs rings.

A cost effective, sensitive, and environmentally friendly sample preparation method for determination of polycyclic aromatic hydrocarbons in solid samples

A simple, cost effective, and yet sensitive sample preparation technique was investigated for determining Polycyclic Aromatic Hydrocarbons (PAHs) in solid samples. The method comprises ultrasonic extraction, Stir Bar Sorptive Extraction (SBSE), and thermal desorption-gas chromatography-mass spectrometry to increase analytical capacity in laboratories. This method required no clean-up, satisfied PAHs recovery, and significantly advances cost performance over conventional extraction methods, such as Soxhlet and Microwave Assisted Extraction (MAE). This study evaluated three operational parameters for ultrasonic extraction: solvent composition, extraction time, and sample load. A standard material, SRM 1649 a (urban dust), was used as the solid sample matrix, and 12 priority PAHs on the US Environmental Protection Agency (US EPA) list were analyzed. Combination of non-polar and polar solvents ameliorated extraction efficiency. Acetone/hexane mixtures of 2:3 and 1:1 (v/v) gave the most satisfactory results: recoveries ranged from 63.3% to 122%. Single composition solvents (methanol, hexane, and dichloromethane) showed fewer recoveries. Comparing 20 min with 60 min sonication, longer sonication diminished extraction efficiencies in general. Furthermore, sample load became a critical factor in certain solvent systems, particularly MeOH. MAE was also compared to the ultrasonic extraction, and results determined that the 20-min ultrasonic extraction using acetone/hexane (2:3, v/v) was as potent as MAE. The SBSE method using 20 mL of 30% alcohol-fortified solution rendered a limit of detection ranging from 1.7 to 32 ng L(-1) and a limit of quantitation ranging from 5.8 to 110 ng L(-1) for the 16 US EPA PAHs.

Determination of phthalate esters in soil samples by microwave assisted extraction and high performance liquid chromatography

A method was developed for the determination of phthalate esters (dimethyl phthalate, diethyl phthalate, benzyl butyl phthalate, di-n-butyl phthalate, di-n-octyl phthalate and di-(2-ethylhextyl) phthalate) in soil samples. The method was based on microwave-assisted extraction of soil using acetonitrile as extractant. Phthalate esters in the extract were determined by high performance liquid chromatography with variable wavelength detector. Microwave-assisted extraction operational parameters, such as the solvent type, extraction temperature and time, were studied and optimized. Under the resultant conditions, recoveries of phthalate esters from spiked soil samples were in the range from 84 to 115% for two different spiking levels (0.1 and 0.5 microg g(-1)), and relative standard deviations of the recoveries were below 8%. The limits of detection ranged from 1.24 to 3.15 microg L(-1). The method did not require clean-up or preconcentration steps. The obtained results showed that microwave-assisted extraction combined with high performance liquid chromatography was a fast and simple method for the determination of phthalate esters in soil samples.

Extraction techniques for polycyclic aromatic hydrocarbons in soils

This paper aims to provide a review of the analytical extraction techniques for polycyclic aromatic hydrocarbons (PAHs) in soils. The extraction technologies described here include Soxhlet extraction, ultrasonic and mechanical agitation, accelerated solvent extraction, supercritical and subcritical fluid extraction, microwave-assisted extraction, solid phase extraction and microextraction, thermal desorption and flash pyrolysis, as well as fluidised-bed extraction. The influencing factors in the extraction of PAHs from soil such as temperature, type of solvent, soil moisture, and other soil characteristics are also discussed. The paper concludes with a review of the models used to describe the kinetics of PAH desorption from soils during solvent extraction.

Pressurized hot water extraction (PHWE)

Pressurized hot water extraction (PHWE) has become a popular green extraction method for different classes of compounds present in numerous kinds of matrices such as environmental, food and botanical samples. PHWE is also used in sample preparation to extract organic contaminants from foodstuff for food safety analysis and soils/sediments for environmental monitoring purposes. The main parameters which influence its extraction efficiency are namely the temperature, extraction time, flow rates and addition of modifiers/additives. Among these different parameters studied, temperature is described as the most important one. It is reported that the extraction of certain compounds is rather dependent on pressurized water with different applied temperature. Thus, the stability and reduced solubilities of certain compounds at elevated temperatures are highlighted in this review. With some modifications, a scaled-up PHWE could extract a higher amount of desirable compounds from solid and powdered samples such as plant and food materials. The PHWE extracts from plants are rich in chemical compounds or metabolites which can be a potential lead for drug discovery or development of disease-resistant food crops.

Characterization of organics, microorganisms, desert soils, and Mars-like soils by thermal volatilization coupled to mass spectrometry and their implications for the search for organics on Mars by Phoenix and future space missions

A key goal for astrobiology is the search for evidence of life on Mars. Because liquid water is a fundamental environmental requirement for life, the recent set of missions to Mars have focused on a strategy known as "follow the water." Since life is made of organic molecules, a logical next step is "follow the organics." However, organics are expected to be present at very low levels on Mars, which would make their detection challenging. Viking was unable to detect organics at parts per billion (ppb), but the effective upper limit could be higher due to the low efficiency of the thermal volatilization (TV) step in releasing organics. Due to its ease of use, TV is still the method selected for current and future NASA and ESA missions. Here, we show that when organics are present in the soil at levels above 1500 parts per million (ppm), there are several characteristic organic fragments detected by TV-mass spectrometry; however, when the levels are below <150 ppm, TV oxidizes them, and no organic fragments are released. Instead, nitric oxide (NO) is produced and can be used to determine quantitatively the organic content if the C/N ratio is determined. Any atmospheric NO sorbed or mineral nitrogen (e.g., nitrates) present in the soil would release NO by TV at distinctive temperature regimes that would not overlap with the organic nitrogen source. Therefore, we suggest that monitoring NO provides the best chance for Phoenix and other future Mars missions to detect nitrogen-containing organics in the soil or ice.

Decontamination of hazardous substances from solid matrices and liquids using supercritical fluids extraction: a review

Supercritical fluid has been adopted as an extraction media to remove various kinds of substances from distinct types of solid matrices since three decades ago. Compared to conventional extraction mode, supercritical fluid extraction technology is preferred because of the flexibility in adjusting its dissolving power and inherent elimination of organic solvent which means reducing time and money needed for subsequent purification. Utilization of this method as an environmental remedial technology, however, has become a trend only after its accomplishment in analytical chemistry was acknowledged. This review tries to summarize in a comprehensive manner the multitude aspects involved in hazardous compounds removal from miscellaneous class of environmental matrices. The industrial adsorbent regeneration using supercritical fluid technology is also discussed. Although, this technology has been successfully realized for environmental remediation in laboratory and on pilot-plant scale, its commercialization attempts still lack significant technology improvement in order to reach the economic feasibility.

Procedures for analysis of atrazine and simazine in environmental matrices

There is an ongoing need to monitor soil and trophic chain samples for residues of triazine herbicides, particularly atrazine and simazine, because these herbicides are among the most used members of their class, are toxic, can be persistent, and are widely distributed in the environment. The main purpose of this review is to provide an overview of principle techniques and approaches used in analyzing atrazine, simazine, and other triazine herbicide residues in environmental matrices. The methods covered generally provide low detection limits, acceptable levels of matrix interferences, and are relatively fast and inexpensive. Atrazine and simazine are popular herbicides used to control a variety of broad leaf and grassy weeds in agriculture and on industrial sites. Because they are widely and frequently used, the environmental contamination of these compounds is considerable. Atrazine, simazine, and other triazines have the ability to translocate in ecosystems. When this occurs, it is often necessary to monitor their residue content in soils, vegetation, biota, and water. There is a vast literature available that addresses the extraction and clean-up of soil, vegetation, animal tissue, and animal fluid samples; unfortunately, few of these publications compare the effectiveness of results obtained on similar matrices. In this review we endeavor to review and provide comparative information on methods dedicated to determining residues of atrazine, simazine, and other triazines in several environment matrices: soil, plants, animal tissues, and water.

Optimized microwave extraction for trace detection of 2,4,6-trinitrotoluene in soil samples

An optimized microwave assisted extraction method for determination of trinitrotoluene (TNT) and related compounds in soil is presented. The new enhanced method exhibits improved extraction recovery and precision as well as sample handling time. For the separation and detection gas chromatography coupled to a thermoionic probe was used achieving TNT and dinitrotoluene detection limits per injection at the femtogram level. The generated extraction recovery and precision data are given for spiked and certified soil. Determined TNT and related compounds residues in soil collected from different parts of the world are presented.

Parameters affecting microwave-assisted extraction of organophosphorus pesticides from agricultural soil

This work describes an optimised method for the determination of six representative organophosphorus pesticides (OPPs) (diazinon, parathion, methyl pirimiphos, methyl parathion, ethoprophos, and fenitrothion) in agricultural soils. The method is based on microwave-assisted extraction using a water-methanol modified mixture for desorption and simultaneous partitioning on n-hexane (MAEP), together with gas chromatography-flame photometric detection (GC-FPD). To improve GC-FPD signals (peak intensity and shape) olive oil was used effectively as a "matrix mimic". The optimisation of the extraction method was achieved in two steps: an initial approach through experimental design and principal component analysis where recovery of compounds using a water-methanol mixture ranged from 54 to 77%, and the second one by studying the addition of KH2PO4 to the extracting solution where recoveries were significantly increased, molecular replacing of OPPs from adsorption sites by phosphate being the probable extraction mechanism. Under optimised conditions, recoveries of pesticides from different soils were higher than 73%, except for methyl parathion in some soils, with SD equal or lower than 11% and detection limits ranging from 0.004 to 0.012 microg g(-1). The proposed method was used to determine OPPs in soil samples from different agricultural zones of Chile.

Sample handling strategies for the determination of persistent trace organic contaminants from biota samples

Even after emergence of most advanced instrumental techniques for the final separation, detection, identification and determination of analytes, sample handling continues to play a basic role in environmental analysis of complex matrices. In fact, sample preparation steps are often the bottleneck for combined time and efficiency in many overall analytical procedures. Thus, it is not surprising that, in the last two decades, a lot of effort has been devoted to the development of faster, safer, and more environment friendly techniques for sample extraction and extract clean up, prior to actual instrumental analysis. This article focuses on the state of the art in sample preparation of environmental solid biological samples dedicated to persistent organic pollutants (POPs) analysis. Extraction techniques such as Soxhlet extraction, sonication-assisted extraction, supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), pressurised liquid extraction (PLE) and matrix solid-phase dispersion (MSPD) are reviewed and their most recent applications to the determination of POPs in biota samples are provided. Additionally, classical as well as promising novel extraction/clean-up techniques such as solid phase microextraction (SPME) are also summarized. Finally, emerging trends in sample preparation able to integrate analytes extraction and their adequate clean-up are presented.