Cloning of the phytases from Emericella nidulans and the thermophilic fungus Talaromyces thermophilus

Glycosylation and charge distribution orchestrates the conformational ensembles of a biotechnologically promissory phytase in different pHs - a computational study

Phytases [myo-inositol(1,2,3,4,5,6) hexakisphosphate phosphohydrolases] are phytate-specific phosphatases not present in monogastric animals. Nevertheless, they are an essential supplement to feeding such animals and for human special diets. It is crucial, hence, the biotechnological use of phytases with intrinsic stability and activity at the acid pHs from gastric environments. Here we use Metadynamics (METADY) simulations to probe the conformational space of the Aspergillus nidulans phytase and the differential effects of pH and glycosylation in this same space. The results suggest that strategic combinations of pH and glycosylation affect the stability of native-like conformations and alternate these structures from a metastable to a stable profile. Furthermore, the protein segments previously reported as more thermosensitive in phytases from this family present a pivotal role in the conformational changes at different conditions, especially H2, H5-7, L8, L10, L12, and L17. Also, the glycosylations and the pH-dependent charge balance modulate the mobility and interactions at these same regions, with consequences for the surface solvation and active site exposition. Finally, although the glycosylations have stabilized the native structure and improved the substrate docking at all the studied pHs, the data suggest a higher phytate receptivity at catalytic poses for the unglycosylated structure at pH 6.5 and the glycosylated one at pH 4.5. This behavior agrees with the exact change in optimum pH reported for this enzyme, expressed on low or high glycosylating systems. We hope the results and insights presented here will be helpful in future approaches for rational engineering of technologically promising phytases and intelligent planning of their heterologous expression systems and conditions for use.Communicated by Ramaswamy H. Sarma.

A Feed Additive Containing Encapsulated 6-Phytase within Recombinant Yarrowia lipolytica Cells Produced by Cultivation on Fat-Containing Waste

Feed phytases are purchased as a dry culture medium of secreting producers, mostly micellar fungi. These preparations are required to withstand heating up to 75–80 °C because they are intended for mixing with feed components with subsequent granulation by spray drying. For this reason, many phytases that have a high specific activity at 37 °C and correspond to the optimal pH of intestinal chyme are not used in practice. A novel expression system allowing accumulation of the phytase from Obesumbacterium proteus within yeast Yarrowia lipolytica was proposed. Encapsulation increases thermal stability of the enzyme from 55 °C up to 70 °C. The obtained preparation exhibited a high impact on the daily weight gain of a weaned mouse model fed a phosphorus-deficient diet at a dosage 165 phytase activity units (FYT)/kg, whereas a commercial phytase preparation—Ladozyme Proxi derived from Aspergillus ficuum—did not improve the daily weight gain even at the dosage of 15,000 FYT/kg.

Purification, sequencing and evaluation of a divergent phytase from Penicillium oxalicum KCTC6440

A fungal strain producing high levels of phytase was purified to homogeneity from Penicillium oxalicum KCTC6440 (PhyA). The molecular mass of the purified PhyA was 65 kDa and optimal activity occurred at 55°C. The enzyme was stable in a pH range of 4.5-6.5, with an optimum performance at pH 5.5. The Km value for the substrate sodium phytate was 0.48 mM with a Vmax of 672 U/mg. The enzyme was inhibited by Ca(2+), Cu(2+), and Zn(2+), and slightly enhanced by EDTA. The PhyA efficiently released phosphate from feedstuffs such as soybean, rich bran and corn meal. The PhyA gene was cloned in two steps of degenerate PCR and inverse PCR and found to comprise 1501 bp and encode 461 amino acid residues. The enzyme was found to have only 13 amino acids differing to the known PhyA from other Penicillium sp., but has distinct enzyme characteristics. Computational analysis showed that PhyA possessed more positively charged residues in the active sites compared to other PhyA molecules, which may explain the broader pH spectrum.

Expression of Aspergillus nidulans phy gene in Nicotiana benthamiana produces active phytase with broad specificities

A full-length phytase gene (phy) of Aspergillus nidulans was amplified from the cDNA library by polymerase chain reaction (PCR), and it was introduced into a bacterial expression vector, pET-28a. The recombinant protein (rPhy-E, 56 kDa) was overexpressed in the insoluble fraction of Escherichia coli culture, purified by Ni-NTA resin under denaturing conditions and injected into rats as an immunogen. To express A. nidulans phytase in a plant, the full-length of phy was cloned into a plant expression binary vector, pPZP212. The resultant construct was tested for its transient expression by Agrobacterium-infiltration into Nicotiana benthamiana leaves. Compared with a control, the agro-infiltrated leaf tissues showed the presence of phy mRNA and its high expression level in N. benthamiana. The recombinant phytase (rPhy-P, 62 kDa) was strongly reacted with the polyclonal antibody against the nonglycosylated rPhy-E. The rPhy-P showed glycosylation, two pH optima (pH 4.5 and pH 5.5), an optimum temperature at 45~55 °C, thermostability and broad substrate specificities. After deglycosylation by peptide-N-glycosidase F (PNGase-F), the rPhy-P significantly lost the phytase activity and retained 1/9 of the original activity after 10 min of incubation at 45 °C. Therefore, the deglycosylation caused a significant reduction in enzyme thermostability. In animal experiments, oral administration of the rPhy-P at 1500 U/kg body weight/day for seven days caused a significant reduction of phosphorus excretion by 16% in rat feces. Besides, the rPhy-P did not result in any toxicological changes and clinical signs.

Extracellular phytase from Aspergillus niger CFR 335: purification and characterization

Phytase, that is extensively used as a feed additive is capable of hydrolyzing phytic acid, an antinutrient found in about 60-80 % of all the plant commodities. This enzyme improves the bioavailability of essential minerals such as Ca(2+), Mg(2+), P, Zn(2+), Fe(3+), that are bound to phytic acid. An extracellular phytase from a local fungal isolate, Aspergillus niger CFR 335 was purified to homogeneity through a three-step column chromatography using DEAE-Sephadex anion exchanger. An active fraction of the enzyme was obtained with NaCl gradient of 2.5 M in DEAE Sephadex column. The enzyme was purified up to 16 fold with a yield of 28.5 %. Substrate specificity studies revealed a highest specific activity of 32.6 ± 3.1 U/mg for sodium phytate with the Km value of 0.08 ± 0.1 mM. The molecular weight of the enzyme was 66 kDa with an optimum temperature of 30 °C and pH 4.5. Up to 80 % of the activity was retained even after storing the enzyme for 6 months at 4 °C.

Recombinants proteins for industrial uses: utilization of Pichia pastoris expression system

The innovation in industrial process with impact in the efficient production is the major challenge for actual industry. A high numerous of enzymes are utilized in at different level of process; the search for new alternatives with better characteristic has become a field of study of great interest, the recombinant protein achievement in a different host system is an alternative widely assessed for production of this. The microorganism Pichia pastoris has been used like a successful expression system in diverse areas, improved the yield and extraction-recovery of the product expressed. The reported of diverse authors in the production of enzymes with different application in industry is varied, in this review the different industry areas and the characteristic of the enzymes produced are detailed.

Crucial role of Pro 257 in the thermostability of Bacillus phytases: biochemical and structural investigation

We have previously cloned and characterized the thermostable phytase (PHY US417) from Bacillus subtilis US417. It differs with PhyC from B. subtilis VTTE-68013 by the R257P substitution. PHY US417 was shown to be more thermostable than PhyC. To elucidate the mechanism of how the Pro 257 changes the thermostability of Bacillus phytases, this residue was mutated to Arg and Ala. The experimental results revealed that the thermostability of the P257A mutants and especially P257R was significantly decreased. The P257R and P257A mutants recovered, respectively, 64.4 and 81.5% of the wild-type activity after incubation at 75 °C for 30 min in the presence of 5mM CaCl(2). The P257R mutation also led to a severe reduction in the specific activity and catalytic efficiency of the enzyme. Structural investigation, by molecular modeling of PHY US417 and PhyC focused on the region of the 257 residue, revealed that this residue was present in a surface loop connecting two of the six characteristic β sheets. The P257 residue is presumed to reduce the local thermal flexibility of the loop, thus generating a higher thermostability.

Molecular cloning, characterization, and expression of the phytase gene from marine yeast Kodamaea ohmeri BG3

The extracellular phytase structural gene was isolated from the cDNA of the marine yeast, Kodamaea ohmeri BG3, using the switching mechanism at 5'-end of RNA transcript (SMART)trade mark rapid-amplification of cDNA ends (RACE) cDNA amplification kit. The gene had an open reading frame of 1389 bp and the coding region of the gene had no intron. It encoded 462 amino acid residues of a protein with a putative signal peptide of 15 amino acids. The protein sequence deduced from the extracellular phytase structural gene contained the consensus motifs (RHGXRX P and HD), which are conserved among histidine acid phosphatases, and six conserved putative N-glycosylation sites. According to the phylogenetic tree of the phytase, the phytase from K. ohmeri BG3 was closely related to Candida albicans (XP_713452) and Pichia stipitis (XP_001385108) phytase proteins and more distantly related to other phytases. The mature peptide encoding cDNA was subcloned into the pET-24a (+) expression vector. The recombinant plasmid [pET-24a (+)PHY1] was expressed in Escherichia coli BL21 (DE3). The expressed fusion protein was analysed by SDS-PAGE and Western blotting, and a specific band with a molecular mass of about 51 kDa was found. An enzyme activity assay verified the recombinant protein as a phytase. A maximum activity of 16.5 U mg(-1) was obtained from the cellular extract of E. coli BL21 (DE3) harbouring pET-24a (+)PHY1. The optimal pH and temperature of the crude recombinant lipase were 5 and 65 degrees C, respectively, and the crude recombinant phytase had hydrolytic activity towards phytate.

High level expression of a synthetic gene encoding Peniophora lycii phytase in methylotrophic yeast Pichia pastoris

Phytase is widespread in nature. It has been used as a cereal feed additive that can enhance the phosphorus and mineral absorption in monogastric animals to reduce the level of phosphorus output in manure. Phytase of Peniophora lycii is a 6'-phytase, which owns high specific activity. To achieve a high expression level of 6'-phytase in Pichia pastoris, the 1,230-bp phytase gene of P. lycii was synthesized and optimized for codon usage, G+C content, as well as mRNA secondary structures. The gene constructs containing wild type or modified phytase gene coding sequences under the control of the highly-inducible alcohol oxidase gene (AOX1) promoter, the synthetic signal peptide (designated MF4I), which is a codon-modified Saccharomyces cerevisiae mating factor alpha-prepro-leader sequence, were used to transform P. pastoris. The P. pastoris strain that expressed the modified phytase gene (phy-pl-sh) with MF4I sequence produced 12.2 g phytase per liter of fluid culture, with the phytase activity of 10,540 U ml(-1). The yield of the modified phytase gene, with bias codon usage and MF4I signal, is 4.4 times higher than that of the wild type gene with MF4I signal and 13.6 times higher than that of the wild type gene with wild type S. cerevisiae signal. The recombinant phytase had one optimum pH (pH 4.5) and an optimum temperature of 50 degrees C. The P. pastoris strain expressed the modified 6-phytase gene, with the MF4I signal peptide showing great potential as a commercial phytase production system.

Molecular cloning of a phytase gene (phy M) from Pseudomonas syringae MOK1

A phytase gene (phy M) was cloned from Pseudomonas syringae MOK1 by two steps of degenerate PCR and inverse PCR. This gene consists of 1,287 nucleotides and encodes a polypeptide of 428 amino acids with a deduced molecular mass of 46,652 kDa. Based on its amino acid sequence, the Phy M shares the active site RHGXRXP and HD sequence motifs, typically characterized by histidine acid phosphatases familly. Each phy M gene fragment encoding mature Phy M with its own signal sequence (pEPSS) and without (pEPSM) was subcloned into the E. coli BL21 (DE3) expression vector, pET22b (+). The enzyme activity in crude extracts of clone pEPSM was 2.514 Umg(-1) of protein, and about 10-fold higher than that of clone pEPSS.

Advances in phytase research

Since its discovery in 1907, a complex of technological developments has created a potential $500 million market for phytase as an animal feed additive. During the last 30 years, research has led to increased use of soybean meal and other plant material as protein sources in animal feed. One problem that had to be overcome was the presence of antinutritional factors, including phytate, in plant meal. Phytate phosphorus is not digested by monogastric animals (e.g., hogs and poultry), and in order to supply enough of this nutrient, additional phosphate was required in the feed ration. Rock phosphate soon proved to be a cost-effective means of supplying this additional phosphorus, and the excess phytin phosphorus could be disposed of easily with the animals' manure. However, this additional phosphorus creates a massive environmental problem when the land's ability to bind it is exceeded. Over the last decade, numerous feed studies have established the efficacy of a fungal phytase, A. niger NRRL 3135, to hydrolyze phytin phosphorus in an animal's digestive tract, which benefits the animal while reducing total phosphorus levels in manure. The gene for phytase has now been cloned and overexpressed to provide a commercial source of phytase. This monomeric enzyme, a type of histidine acid phophatase (HAP), has been characterized and extensively studied. HAPs are also found in other fungi, plants, and animals. Several microbial and plant HAPs are known to have significant phytase activity. A second A. niger phytase (phyB), a tetramer, is known and, like phyA, has had its X-ray crystal structure determined. The model provided by this crystal structure research has provided an enhanced understanding of how these molecules function. In addition to the HAP phytase, several other phytases that lack the unique HAP active site motif RHGXRXP have been studied. The best known group of the non-HAPs is phytase C (phyC) from the genus Bacillus. While a preliminary X-ray crystallographic analysis has been initiated, no enzymatic mechanism has been proposed. Perhaps the pivotal event in the last century that created the need for phytase was the development of modern fertilizers after the Second World War. This fostered a transformation in agriculture and a tremendous increase in feed-grain production. These large quantities of cereals and meal in turn led to the transition of one segment of agriculture into "animal agriculture," with their its animal production capability. The huge volumes of manure spawned by these production units in time exceeded both the capacity of their crops and crop lands to utilize or bind the increased amount of phosphorus. Nutrient runoff from this land has now been linked to a number of blooms of toxin-producing microbes. Fish kills associated with these blooms have attracted public and governmental concern, as well as greater interest in phytase as a means to reduce this phosphorus pollution. Phytase research efforts now are focused on the engineering of an improved enzyme. Improved heat tolerance to allow the enzyme to survive the brief period of elevated temperature during the pelletization process is seen as an essential step to lower its cost in animal feed. Information from the X-ray crystal structure of phytase is also relevant to improving the pH optimum, substrate specificity, and enzyme stability. Several studies on new strategies that involve synergistic interactions between phytase and other hydrolytic enzymes have shown positive results. Further reduction in the production cost of phytase is also being pursued. Several studies have already investigated the use of various yeast expression systems as an alternative to the current production method for phytase using overexpression in filamentous fungi. Expression in plants is underway as a means to commercially produce phytase, as in biofarming in which plants such as alfalfa are used as "bioreactors," and also by developing plant cultivars that would produce enough transgenic phytase so that additional supplementation of their grain or meals is not necessary. Ultimately, transgenic poultry and hogs may produce their own digestive phytase. Another active area of current phytase research is expanding its usage. One area that offers tremendous opportunity is increasing the use of phytase in aquaculture. Research is currently centered on utilizing phytase to allow producers in this industry to switch to lower-cost plant protein in their feed formulations. Development of a phytase for this application could significantly lower production costs. Other areas for expanded use range from the use of phytase as a soil amendment, to its use in a bioreactor to generate specific myo-inositol phosphate species. The transformation of phytase into a peroxidase may lead to another novel use for this enzyme. As attempts are made to widen the use of phytase, it is also important that extended exposure and breathing its dust be avoided as prudent safety measures to avoid possible allergic responses. In expanding the use of phytase, another important consideration has been achieved. Conservation of the world's deposits of rock phosphate is recognized as important for future generations. Phosphorus is a basic component of life like nitrogen, but, unlike nitrogen, phosphorus does not have a cycle to constantly replenish its supply. It is very likely that the use of phytase will expand as the need to conserve the world's phosphate reserves increases.

Engineering of phytase for improved activity at low pH

For industrial applications in animal feed, a phytase of interest must be optimally active in the pH range prevalent in the digestive tract. Therefore, the present investigation describes approaches to rationally engineer the pH activity profiles of Aspergillus fumigatus and consensus phytases. Decreasing the negative surface charge of the A. fumigatus Q27L phytase mutant by glycinamidylation of the surface carboxy groups (of Asp and Glu residues) lowered the pH optimum by ca. 0.5 unit but also resulted in 70 to 75% inactivation of the enzyme. Alternatively, detailed inspection of amino acid sequence alignments and of experimentally determined or homology modeled three-dimensional structures led to the identification of active-site amino acids that were considered to correlate with the activity maxima at low pH of A. niger NRRL 3135 phytase, A. niger pH 2.5 acid phosphatase, and Peniophora lycii phytase. Site-directed mutagenesis confirmed that, in A. fumigatus wild-type phytase, replacement of Gly-277 and Tyr-282 with the corresponding residues of A. niger phytase (Lys and His, respectively) gives rise to a second pH optimum at 2.8 to 3.4. In addition, the K68A single mutation (in both A. fumigatus and consensus phytase backbones), as well as the S140Y D141G double mutation (in A. fumigatus phytase backbones), decreased the pH optima with phytic acid as substrate by 0.5 to 1.0 unit, with either no change or even a slight increase in maximum specific activity. These findings significantly extend our tools for rationally designing an optimal phytase for a given purpose.

Expression, gene cloning, and characterization of five novel phytases from four basidiomycete fungi: Peniophora lycii, Agrocybe pediades, a Ceriporia sp., and Trametes pubescens

Phytases catalyze the hydrolysis of phosphomonoester bonds of phytate (myo-inositol hexakisphosphate), thereby creating lower forms of myo-inositol phosphates and inorganic phosphate. In this study, cDNA expression libraries were constructed from four basidiomycete fungi (Peniophora lycii, Agrocybe pediades, a Ceriporia sp., and Trametes pubescens) and screened for phytase activity in yeast. One full-length phytase-encoding cDNA was isolated from each library, except for the Ceriporia sp. library where two different phytase-encoding cDNAs were found. All five phytases were expressed in Aspergillus oryzae, purified, and characterized. The phytases revealed temperature optima between 40 and 60 degrees C and pH optima at 5.0 to 6.0, except for the P. lycii phytase, which has a pH optimum at 4.0 to 5.0. They exhibited specific activities in the range of 400 to 1,200 U. mg, of protein(-1) and were capable of hydrolyzing phytate down to myo-inositol monophosphate. Surprisingly, (1)H nuclear magnetic resonance analysis of the hydrolysis of phytate by all five basidiomycete phytases showed a preference for initial attack at the 6-phosphate group of phytic acid, a characteristic that was believed so far not to be seen with fungal phytases. Accordingly, the basidiomycete phytases described here should be grouped as 6-phytases (EC 3.1.3.26).

Production, purification and properties of microbial phytases

Phytases (myo-inositol hexakisphosphate phosphohydrolase, EC 3.1.3.8) catalyse the release of phosphate from phytate (mycoinositol hexakiphosphate). Several cereal grains, legumes and oilseeds, etc., store phosphorus as phytate. Environmental pollution due to the high-phosphate manure, resulting in the accumulation of P at various locations has raised serious concerns. Phytases appear of significant value in effectively controlling P pollution. They can be produced from a host of sources including plants, animals and micro-organisms. Microbial sources, however, are promising for their commercial exploitations. Strains of Aspergillus sp., chiefly A. ficuum and A. niger have most commonly been employed for industrial purposes. Phytases are considered as a monomeric protein, generally possessing a molecular weight between 40 and 100 kDa. They show broad substrate specificity and have generally pH and temperature optima around 4.5-6.0 and 45-60 degrees C. The crystal structure of phytase has been determined at 2.5 A resolution. Immobilization of phytase has been found to enhance its thermostability. This article reviews recent trends on the production, purification and properties of microbial phytases.

Optimization of the catalytic properties of Aspergillus fumigatus phytase based on the three-dimensional structure

Previously, we determined the DNA and amino acid sequences as well as biochemical and biophysical properties of a series of fungal phytases. The amino acid sequences displayed 49-68% identity between species, and the catalytic properties differed widely in terms of specific activity, substrate specificity, and pH optima. With the ultimate goal to combine the most favorable properties of all phytases in a single protein, we attempted, in the present investigation, to increase the specific activity of Aspergillus fumigatus phytase. The crystal structure of Aspergillus niger NRRL 3135 phytase known at 2.5 A resolution served to specify all active site residues. A multiple amino acid sequence alignment was then used to identify nonconserved active site residues that might correlate with a given favorable property of interest. Using this approach, Gln27 of A. fumigatus phytase (amino acid numbering according to A. niger phytase) was identified as likely to be involved in substrate binding and/or release and, possibly, to be responsible for the considerably lower specific activity (26.5 vs. 196 U x [mg protein](-1) at pH 5.0) of A. fumigatus phytase when compared to Aspergillus terreus phytase, which has a Leu at the equivalent position. Site-directed mutagenesis of Gln27 of A. fumigatus phytase to Leu in fact increased the specific activity to 92.1 U x (mg protein)(-1), and this and other mutations at position 27 yielded an interesting array of pH activity profiles and substrate specificities. Analysis of computer models of enzyme-substrate complexes suggested that Gln27 of wild-type A. fumigatus phytase forms a hydrogen bond with the 6-phosphate group of myo-inositol hexakisphosphate, which is weakened or lost with the amino acid substitutions tested. If this hydrogen bond were indeed responsible for the differences in specific activity, this would suggest product release as the rate-limiting step of the A. fumigatus wild-type phytase reaction.

Active site residue 297 of Aspergillus niger phytase critically affects the catalytic properties

The wild-type phytases from the Aspergillus niger strains NRRL 3135 and T213 display a three-fold difference in specific activity (103 versus 32 U/mg protein), despite only 12 amino acid differences that are distributed all over the sequence of the protein. Of the 12 divergent positions, three are located in or close to the substrate binding site. Site-directed mutagenesis of these residues in A. niger T213 phytase showed that the R297Q mutation (R in T213, Q in NRRL 3135) fully accounts for the differences in catalytic properties observed. Molecular modelling revealed that R297 may directly interact with a phosphate group of phytic acid. The fact that this presumed ionic interaction - causing stronger binding of substrates and products - correlates with a lower specific activity indicates that product (myo-inositol pentakisphosphate) release is the rate-limiting step of the reaction.

Expression of the Aspergillus fumigatus phytase gene in Pichia pastoris and characterization of the recombinant enzyme

Aspergillus fumigatus phytase is a heat-stable enzyme of great potential. Our objective was to determine if a high level of functional expression of the A. fumigatus phytase gene could be produced in Pichia pastoris and how the recombinant phytase reacted to different substrates, heating conditions, and proteases. A 1.4-kb DNA fragment containing the coding region of the gene was inserted into the expression vector pPICZalphaA and expressed in P. pastoris as an active, extracellular phytase (r-Afp). The yield was 729 mg of purified protein per liter of culture, with a specific activity of 43 units/mg of protein. The enzyme r-Afp shared similar pH and temperature optima, molecular size, glycosylation extent, and specificity for p-nitrophenyl phosphate and sodium phytate to those of the same enzyme expressed in A. niger. Given 20 min of exposure to 65 to 90 degrees C, the enzyme retained 20 to 39% higher residual activity in 10 and 200 mM sodium acetate than that in sodium citrate. The enzyme seemed to be resistant to pepsin digestion, but was degraded by high levels of trypsin. In conclusion, P. pastoris is a potential host to express high levels of A. fumigatus phytase and the thermostability of the recombinant enzyme is modulated by the specificity of buffer used in the heat treatment.

From DNA sequence to improved functionality: using protein sequence comparisons to rapidly design a thermostable consensus phytase

Naturally-occurring phytases having the required level of thermostability for application in animal feeding have not been found in nature thus far. We decided to de novo construct consensus phytases using primary protein sequence comparisons. A consensus enzyme based on 13 fungal phytase sequences had normal catalytic properties, but showed an unexpected 15-22 degrees C increase in unfolding temperature compared with each of its parents. As a first step towards understanding the molecular basis of increased heat resistance, the crystal structure of consensus phytase was determined and compared with that of Aspergillus niger phytase. Aspergillus niger phytase unfolds at much lower temperatures. In most cases, consensus residues were indeed expected, based on comparisons of both three-dimensional structures, to contribute more to phytase stabilization than non-consensus amino acids. For some consensus amino acids, predicted by structural comparisons to destabilize the protein, mutational analysis was performed. Interestingly, these consensus residues in fact increased the unfolding temperature of the consensus phytase. In summary, for fungal phytases apparently an unexpected direct link between protein sequence conservation and protein stability exists.

Crystal structure of Aspergillus niger pH 2.5 acid phosphatase at 2. 4 A resolution

The crystal structure of Aspergillus niger pH 2.5 acid phosphatase (EC 3.1.3.2) has been determined at 2.4 A resolution. In the crystal, two dimers form a tetramer in which the active sites are easily accessible to substrates. The main contacts in the dimer come from the N termini, each lying on the surface of the neighbouring molecule. The monomer consists of two domains, with the active site located at their interface. The active site has a highly conserved catalytic center and a charge distribution, which explains the highly acidic pH optimum and the broad substrate specificity of the enzyme.

Cloning, sequencing, and expression of an Escherichia coli acid phosphatase/phytase gene (appA2) isolated from pig colon

Bacterial strains were isolated from the pig colon to screen for phytase and acid phosphatase activities. Among 93 colonies, Colony 88 had the highest activities for both enzymes and was identified as an Escherichia coli strain. Using primers derived from the E. coli pH 2.5 acid phosphatase appA sequence (Dassa et al. (1990), J. Bacteriol. 172, 5497-5500), we cloned a 1482 bp DNA fragment from the isolate. In spite of 95% homology between the sequenced gene and the appA, 7 amino acids were different in their deduced polypeptides. To characterize the properties and functions of the encoded protein, we expressed the coding region of the isolated DNA fragment and appA in Pichia pastoris, respectively, as r-appA2 and r-appA. The recombinant protein r-appA2, like r-appA and the r-phyA phytase expressed in Aspergillus niger, was able to hydrolyze phosphorus from sodium phytate and p-nitrophenyl phosphate. However, there were distinct differences in their pH profiles, Km and Vmax for the substrates, specific activities of the purified enzymes, and abilities to release phytate phosphorus in soybean meal. In conclusion, the DNA fragment isolated from E. coli in pig colon seems to encode for a new acid phosphatase/phytase and is designated as E. coli appA2.

Biophysical characterization of fungal phytases (myo-inositol hexakisphosphate phosphohydrolases): molecular size, glycosylation pattern, and engineering of proteolytic resistance

Phytases (myo-inositol hexakisphosphate phosphohydrolases) are found naturally in plants and microorganisms, particularly fungi. Interest in these enzymes has been stimulated by the fact that phytase supplements increase the availability of phosphorus in pig and poultry feed and thereby reduce environmental pollution due to excess phosphate excretion in areas where there is intensive livestock production. The wild-type phytases from six different fungi, Aspergillus niger, Aspergillus terreus, Aspergillus fumigatus, Emericella nidulans, Myceliophthora thermophila, and Talaromyces thermophilus, were overexpressed in either filamentous fungi or yeasts and purified, and their biophysical properties were compared with those of a phytase from Escherichia coli. All of the phytases examined are monomeric proteins. While E. coli phytase is a nonglycosylated enzyme, the glycosylation patterns of the fungal phytases proved to be highly variable, differing for individual phytases, for a given phytase produced in different expression systems, and for individual batches of a given phytase produced in a particular expression system. Whereas the extents of glycosylation were moderate when the fungal phytases were expressed in filamentous fungi, they were excessive when the phytases were expressed in yeasts. However, the different extents of glycosylation had no effect on the specific activity, the thermostability, or the refolding properties of individual phytases. When expressed in A. niger, several fungal phytases were susceptible to limited proteolysis by proteases present in the culture supernatant. N-terminal sequencing of the fragments revealed that cleavage invariably occurred at exposed loops on the surface of the molecule. Site-directed mutagenesis of A. fumigatus and E. nidulans phytases at the cleavage sites yielded mutants that were considerably more resistant to proteolytic attack. Therefore, engineering of exposed surface loops may be a strategy for improving phytase stability during feed processing and in the digestive tract.

Comparison of the thermostability properties of three acid phosphatases from molds: Aspergillus fumigatus phytase, A. niger phytase, and A. niger PH 2.5 acid phosphatase

Enzymes that are used as animal feed supplements should be able to withstand temperatures of 60 to 90 degrees C, which may be reached during the feed pelleting process. The thermostability properties of three histidine acid phosphatases, Aspergillus fumigatus phytase, Aspergillus niger phytase, and A. niger optimum pH 2.5 acid phosphatase, were investigated by measuring circular dichroism, fluorescence, and enzymatic activity. The phytases of A. fumigatus and A. niger were both denatured at temperatures between 50 and 70 degrees C. After heat denaturation at temperatures up to 90 degrees C, A. fumigatus phytase refolded completely into a nativelike, fully active conformation, while in the case of A. niger phytase exposure to 55 to 90 degrees C was associated with an irreversible conformational change and with losses in enzymatic activity of 70 to 80%. In contrast to these two phytases, A. niger pH 2.5 acid phosphatase displayed considerably higher thermostability; denaturation, conformational changes, and irreversible inactivation were observed only at temperatures of >/=80 degrees C. In feed pelleting experiments performed at 75 degrees C, the recoveries of the enzymatic activities of the three acid phosphatases were similar (63 to 73%). At 85 degrees C, however, the recovery of enzymatic activity was considerably higher for A. fumigatus phytase (51%) than for A. niger phytase (31%) or pH 2.5 acid phosphatase (14%). These findings confirm that A. niger pH 2.5 acid phosphatase is irreversibly inactivated at temperatures above 80 degrees C and that the capacity of A. fumigatus phytase to refold properly after heat denaturation may favorably affect its pelleting stability.

Phytase: sources, preparation and exploitation

This review deals with phytase (myo-inositol hexakisphosphate phosphohydrolase) and covers microbiological sources, phytase occurrence in plants and animals, its purification, physico-chemical and molecular properties. Protein engineering of phytase and potential enzyme applications are discussed.