Chapter 8 Lipid-protein interactions involved in bacteriophage M13 infection

Anchoring mechanisms of membrane-associated M13 major coat protein

Bacteriophage M13 major coat protein is extensively used as a biophysical, biochemical, and molecular biology reference system for studying membrane proteins. The protein has several elements that control its position and orientation in a lipid bilayer. The N-terminus is dominated by the presence of negatively charged amino acid residues (Glu2, Asp4, and Asp5), which will always try to extend into the aqueous phase and therefore act as a hydrophilic anchor. The amphipathic and the hydrophobic transmembrane part contain the most important hydrophobic anchoring elements. In addition there are specific aromatic and charged amino acid residues in these domains (Phe 11, Tyr21, Tyr24, Trp26, Phe42, Phe45, Lys40, Lys43, and Lys44) that fine-tune the association of the protein to the lipid bilayer. The interfacial Tyr residues are important recognition elements for precise protein positioning, a function that cannot be performed optimally by residues with an aliphatic character. The Trp26 anchor is not very strong: depending on the context, the tryptophan residue may move in or out of the membrane. On the other hand, Lys residues and Phe residues at the C-terminus of the protein act in a unique concerted action to strongly anchor the protein in the lipid bilayer.

Membrane-bound conformation of M13 major coat protein: a structure validation through FRET-derived constraints

M13 major coat protein, a 50-amino-acid-long protein, was incorporated into DOPC/DOPG (80/20 molar ratio) unilamellar vesicles. Over 60% of all amino acid residues was replaced with cysteine residues, and the single cysteine mutants were labeled with the fluorescent label I-AEDANS. The coat protein has a single tryptophan residue that is used as a donor in fluorescence (or Förster) resonance energy transfer (FRET) experiments, using AEDANS-labeled cysteines as acceptors. Based on FRET-derived constraints, a straight alpha-helix is proposed as the membrane-bound conformation of the coat protein. Different models were tested to represent the molecular conformations of the donor and acceptor moieties. The best model was used to make a quantitative comparison of the FRET data to the structures of M13 coat protein and related coat proteins in the Protein Data Bank. This shows that the membrane-bound conformation of the coat protein is similar to the structure of the coat protein in the bacteriophage that was obtained from x-ray diffraction. Coat protein embedded in stacked, oriented bilayers and in micelles turns out to be strongly affected by the environmental stress of these membrane-mimicking environments. Our findings emphasize the need to study membrane proteins in a suitable environment, such as in fully hydrated unilamellar vesicles. Although larger proteins than M13 major coat protein may be able to handle environmental stress in a different way, any membrane protein with water exposed parts in the C or N termini and hydrophilic loop regions should be treated with care.

Quantification of Protein-Lipid Selectivity using FRET: Application to the M13 Major Coat Protein

Quantification of lipid selectivity by membrane proteins has been previously addressed mainly from electron spin resonance studies. We present here a new methodology for quantification of protein-lipid selectivity based on fluorescence resonance energy transfer. A mutant of M13 major coat protein was labeled with 7-diethylamino-3((4'iodoacetyl)amino)phenyl-4-methylcoumarin to be used as the donor in energy transfer studies. Phospholipids labeled with N-(7-nitro-2-1,3-benzoxadiazol-4-yl) were selected as the acceptors. The dependence of protein-lipid selectivity on both hydrophobic mismatch and headgroup family was determined. M13 major coat protein exhibited larger selectivity toward phospholipids which allow for a better hydrophobic matching. Increased selectivity was also observed for anionic phospholipids and the relative association constants agreed with the ones already presented in the literature and obtained through electron spin resonance studies. This result led us to conclude that fluorescence resonance energy transfer is a promising methodology in protein-lipid selectivity studies.

Protein-lipid interactions of bacteriophage M13 major coat protein

During the past years, remarkable progress has been made in our understanding of the replication cycle of bacteriophage M13 and the molecular details that enable phage proteins to navigate in the complex environment of the host cell. With new developments in molecular membrane biology in combination with spectroscopic techniques, we are now in a position to ask how phages carry out this delicate process on a molecular level, and what sort of protein-lipid and protein-protein interactions are involved. In this review we will focus on the molecular details of the protein-protein and protein-lipid interactions of the major coat protein (gp8) that may play a role during the infection of Escherichia coli by bacteriophage M13.

Constrained modeling of spin-labeled major coat protein mutants from M13 bacteriophage in a phospholipid bilayer

The family of three-dimensional molecular structures of the major coat protein from the M13 bacteriophage, which was determined in detergent micelles by NMR methods, has been analyzed by constrained geometry optimization in a phospholipid environment. A single-layer solvation shell of dioleoyl phosphatidylcholine lipids was built around the protein, after replacing single residues by cysteines with a covalently attached maleimide spin label. Both the residues substituted and the phospholipid were chosen for comparison with site-directed spin labeling EPR measurements of distance and local mobility made previously on membranous assemblies of the M13 coat protein purified from viable mutants. The main criteria for identifying promising candidate structures, out of the 300 single-residue mutant models generated for the membranous state, were 1) lack of steric conflicts with the phospholipid bilayer, 2) good match of the positions of spin-labeled residues along the membrane normal with EPR measurements, and 3) a good match between the sequence profiles of local rotational freedom and a structural restriction parameter for the spin-labeled residues obtained from the model. A single subclass of structure has been identified that best satisfies these criteria simultaneously. The model presented here is useful for the interpretation of future experimental data on membranous M13 coat protein systems. It is also a good starting point for full-scale molecular dynamics simulations and for the design of further site-specific spectroscopic experiments.

Conventional and saturation-transfer EPR of spin-labeled mutant bacteriophage M13 coat protein in phospholipid bilayers

A mutant of bacteriophage M13 was prepared in which a cysteine residue was introduced at position 25 of the major coat protein. The mutant coat protein was spin-labeled with a nitroxide derivative of maleimide and incorporated at different lipid-to-protein (L/P) ratios in DOPC or DOPG. The rotational dynamics of the reconstituted mutant coat protein was studied using EPR and saturation transfer (ST) EPR techniques. The spectra are indicative for an anisotropic motion of the maleimide spin label with a high order parameter (S = 0.94). This is interpreted as a wobbling motion of the spin label with a correlation time of about 10(-6) to 10(-5) s within a cone, and a rotation of the spin label about its long molecular axis with a correlation time of about l0(-7) s. The wobbling motion is found to correspond generally to the overall rotational motion of a coat protein monomer about the normal to the bilayer. This motion is found to be sensitive to the temperature and L/P ratio. The high value of the order parameter implies that the spin label experiences a strong squeezing effect by its local environment, that reduces the amplitude of the wobbling motion. This squeezing effect is suggested to arise from a turn structure in the coat protein from Gly23 to Glu20.

Local dynamics of the M13 major coat protein in different membrane-mimicking systems

The local environment of the transmembrane and C-terminal domain of M13 major coat protein was probed by site-directed ESR spin labeling when the protein was introduced into three membrane-mimicking systems, DOPC vesicles, sodium cholate micelles, and SDS micelles. For this purpose, we have inserted unique cysteine residues at specific positions in the transmembrane and C-terminal region, using site-directed mutagenesis. Seven viable mutants with reasonable yield were harvested: A25C, V31C, T36C, G38C, T46C, A49C, and S50C. The mutant coat proteins were indistinguishable from wild type M13 coat protein with respect to their conformational and aggregational properties. The ESR data suggest that the amino acid positions 25 and 46 of the coat protein in DOPC vesicles are located close to the membrane-water interface. In this way the lysines at positions 40, 43, and 44 and the phenylalanines at positions 42 and 45 act as hydrophilic and hydrophobic anchors, respectively. The ESR spectra of site specific maleimido spin-labeled mutant coat proteins reconstituted into DOPC vesicles and solubilized in sodium cholate or SDS indicate that the local dynamics of the major coat protein is significantly affected by its structural environment (micellar vs bilayer), location (aqueous vs hydrophobic), and lipid/protein ratio. The detergents SDS and sodium cholate sufficiently well solubilize the major coat protein and largely retain its secondary structure elements. However, the results indicate that they have a poorly defined protein-amphiphilic structure and lipid-water interface as compared to bilayers and thus are not a good substitute for lipid bilayers in biophysical studies.

Accessibility and environment probing using cysteine residues introduced along the putative transmembrane domain of the major coat protein of bacteriophage M13

The major coat protein of the filamentous bacteriophage M13 is located in the inner membrane of host cell Escherichia coli prior to assembly into virions. To identify the transmembrane domain of the coat protein, we have introduced unique cysteine residues along the putative transmembrane domain at position 25, 31, 33, 36, 38, 46, 47, 49, or 50. The mutant major coat protein was solubilized by membrane-mimicking detergents or reconstituted into mixed bilayers of phospholipids. Information about the environmental polarity was deduced from the wavelength of maximum emission, using N-[[(iodoacetyl)-amino)ethyl]-1-sulfonaphthylamine (IAEDANS) attached to the SH groups of the cysteines as a fluorescent probe. Additional information was obtained by determining the accessibility of AEDANS for the fluorescence quencher molecules acrylamide and 5-doxylstearic acid, and the reactivity of the cysteine's sulfhydryl group toward 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB). Our data suggest transmembrane boundaries close to residue 25 and 46, with residue 25 inside the hydrophobic part of the membrane in very close proximity to the membrane-water interface and residue 46 located at the membrane-water interface. Domains of the mutant coat protein which are packed or coated by cholate molecules and various other detergents [except for sodium dodecyl sulfate (SDS)] are at least similarly packed by phospholipid molecules in bilayers. SDS is a good solubilizing detergent but badly mimics the typical nature of a membrane structure. The overall results are interpreted with respect to the established conformation of the coat protein and its membrane anchoring mechanism.