Synthesis of aqueous magnetic liquids by surface complexation of maghemite nanoparticles

Magnetite Nanoparticles: Synthesis and Applications in Optics and Nanophotonics

Magnetite nanoparticles with different surface coverages are of great interest for many applications due to their intrinsic magnetic properties, nanometer size, and definite surface morphology. Magnetite nanoparticles are widely used for different medical-biological applications while their usage in optics is not as widespread. In recent years, nanomagnetite suspensions, so-called magnetic ferrofluids, are applied in optics due to their magneto-optical properties. This review gives an overview of nanomagnetite synthesis and its properties. In addition, the preparation and application of magnetic nanofluids in optics, nanophotonics, and magnetic imaging are described.

Adsorption of Organic Dyes on Magnetic Iron Oxide Nanoparticles. Part I: Mechanisms and Adsorption-Induced Nanoparticle Agglomeration

This series of two papers is devoted to the effect of organic dye (methylene blue, MB; or methyl orange, MO) adsorption on the surface of either bare or citrate-coated magnetic iron oxide nanoparticles (IONPs) on their primary agglomeration (in the absence of an applied magnetic field) and secondary field-induced agglomeration. The present paper (Part I) is focused on physicochemical mechanisms of dye adsorption and adsorption-induced primary agglomeration of IONPs. Dye adsorption to oppositely charged IONPs is found to be mostly promoted by electrostatic interactions and is very sensitive to pH and ionic strength variations. The shape of adsorption isotherms is correctly reproduced by the Langmuir law. For the particular MB/citrated IONP pair, the maximum surface density of adsorbed MB seems to correspond to the packing density of an adsorbed monolayer rather than to the surface density of the available adsorption sites. MB is shown to form H-aggregates on the surface of citrate-coated IONPs. The effective electric charge on the IONP surface remains nearly constant in a broad range of surface coverages by MB due to the combined action of counterion exchange and counterion condensation. Primary agglomeration of IONPs (revealed by an exponential increase of hydrodynamic size with surface coverage by MB) probably comes from correlation attractions or π-stacking aromatic interactions between adsorbed MB molecules or H-aggregates. From the application perspective, the maximum adsorption capacity is 139 ± 4 mg/g for the MB/citrated IONP pair (pH = 4-11) and 257 ± 16 mg/g for the MO/bare IONP pair (pH ∼ 4). Citrated IONPs have shown a good potential for their reusability in water treatment, with the adsorption efficiency remaining about 99% after nine adsorption/desorption cycles.

Free ions in kerosene-based ferrofluid detected by impedance spectroscopy

The influence of the free ions on the electric response of cells filled with kerosene-based ferrofluids in the low-frequency region is explored. The experimental investigations have been performed on cells limited by different types of electrodes, with the same kind of ferrofluid, by means of the impedance spectroscopy technique. The electrodes considered in our study are made of titanium, platinum, gold, brass and surgical steel. The analysis of the spectra of the real and imaginary parts of the electric impedance of the cell data has been done by means of a simplified version of the Poisson-Nernst-Planck model, in which only the carriers of a given sign are mobile. The agreement between the theoretical predictions and the experimental data is rather good on the whole frequency range. From the analysis of the data in the low-frequency range, dominated by the properties of the electrodes, we discovered that only gold electrodes behave in a manner different from the other electrodes. From the best fit of the experimental data the free-ions density is determined as well as their diffusion coefficient in kerosene. The estimated dielectric constant of the kerosene is in good agreement with the values reported in the literature. In the framework of our model, the surface conductivity of the electrodes has been also determined.

Doxorubicin Intracellular Remote Release from Biocompatible Oligo(ethylene glycol) Methyl Ether Methacrylate-Based Magnetic Nanogels Triggered by Magnetic Hyperthermia

Hybrid nanogels, composed of thermoresponsive polymers and superparamagnetic nanoparticles, are attractive nanocarriers for biomedical applications, being able-as a polymer matrix-to uptake and release high quantities of chemotherapeutic agents and-as magnetic nanoparticles-to be heated when exposed to an alternative magnetic field (AMF), better known as magnetic hyperthermia. Herein, biocompatible, pH-responsive, magnetoresponsive, and thermoresponsive nanogels, based on oligo(ethylene glycol) methyl ether methacrylate monomers and a methacrylic acid comonomer were prepared by conventional precipitation radical copolymerization in water, post-assembled by complexation with iron oxide magnetic nanoparticles (MNPs) of maghemite (γ-Fe₂O₃), and loaded with an anticancer drug (doxorubicin, DOX), for remotely controlled drug release by a "hot spot", as an athermal magnetic hyperthermia strategy against cancer. These nanogels, denoted MagNanoGels, with a hydrodynamic diameter from 328 to 460 nm, as a function of the MNP content, have a swelling-deswelling behavior at their volume phase temperature transition around 47 °C in a physiological medium (pH 7.5), which is above the human body temperature (37 °C). Applying an alternative magnetic field increases the release of DOX by 2-fold, while no macroscopic heating was recorded. This enhanced drug release is due to a shrinking of the polymer network by local heating, as illustrated by the MagNanoGel size decrease under an AMF. In cancer cells, not only do the DOX-MagNanoGels internalize DOX more efficiently than free DOX, but also DOX intracellular release can be remotely triggered under an AMF, in athermal conditions, thus enhancing DOX cytotoxicity.

Morphological Analysis of Reticuloendothelial System in Capuchin Monkeys (Sapajus spp.) after Meso-2,3-Dimercaptosuccinic Acid (DMSA) Coated Magnetic Nanoparticles Administration

Magnetic nanoparticles can be used for numerous in vitro and in vivo applications. However, since uptake by the reticuloendothelial system represents an obstacle for the achievement of nanoparticle diagnostic and therapeutic goals, the aim of the present study was to evaluate the uptake of dimercaptosuccinic acid coated magnetic nanoparticles by reticuloendothelial system phagocytic cells present in lymph nodes, spleen, and liver tissue and how the presence of these particles could have an impact on the morphology of these organs in capuchin monkeys (Sapajus spp.). Animals were intravenously injected with dimercaptosuccinic acid coated magnetic nanoparticles and euthanized 12 hours and 90 days post-injection. Organs were processed by transmission electron microscopy and histological techniques. Samples of spleen and lymph nodes showed no morphological changes. Nevertheless, liver samples collected 90 days post-administration showed slight morphological alteration in space of Disse. Moreover, morphometrical analysis of hepatic mitochondria was performed, suggesting a clear positive correlation between mitochondrial area and dimercaptosuccinic acid coated magnetic nanoparticles administration time. The present results are directly relevant to current safety considerations in clinical diagnostic and therapeutic uses of magnetic nanoparticles.

Influence of a cationic surfactant on adsorption of p-nitrophenol by a magsorbent based on magnetic alginate beads

The paper focuses on the removal of p-nitrophenol by an adsorption process. A magnetic adsorbent was synthesized by encapsulation of magnetic functionalized nanoparticles using alginate as a green biopolymer matrix. A cationic surfactant, cetylpyridinium chloride (CPyCl), was used to confer a hydrophobic character to the magnetic beads and thus to promote their adsorption efficiency. The effect of different parameters such as initial concentrations of both PNP and CPyCl, contact time and solution pH value on the adsorption of PNP in the presence of CPyCl was investigated. It should be noted that combination of magnetic and adsorption properties in a same material is an interesting challenge which could overcome the recovery problems of pollutant-loaded adsorbent.

Superparamagnetic iron oxide nanoparticles for in vivo molecular and cellular imaging

In the last decade, the biomedical applications of nanoparticles (NPs) (e.g. cell tracking, biosensing, magnetic resonance imaging (MRI), targeted drug delivery, and tissue engineering) have been increasingly developed. Among the various NP types, superparamagnetic iron oxide NPs (SPIONs) have attracted considerable attention for early detection of diseases due to their specific physicochemical properties and their molecular imaging capabilities. A comprehensive review is presented on the recent advances in the development of in vitro and in vivo SPION applications for molecular imaging, along with opportunities and challenges.

Synthesis methods to prepare single- and multi-core iron oxide nanoparticles for biomedical applications

We review and classify synthetic routes to either single-core or multi-core iron oxide nanoparticles for biomedical applications.

Synthetic routes to magnetic nanoparticles for MPI

Magnetic particle imaging (MPI) is a new imaging technique for visualizing the three-dimensional distribution of superparamagnetic iron oxide nanoparticles with specific properties (MPI tracers). Initial results obtained with MPI using superparamagnetic iron oxide as blood pool markers suggest that the method has great potential for cardiovascular imaging. Conversely, no clinically approved MPI tracers currently exist that could be used to exploit this potential of MPI. This article describes thermal decomposition and coprecipitation, two relevant methods for synthesizing and optimizing superparamagnetic iron oxide nanoparticles for MPI. Furthermore it summarizes the recent literature on MPI tracers and explores what can be learned from structural studies with Resovist(®) for novel synthesis approaches.

Direct amine-functionalisation of γ-Fe2O3nanoparticles

Ferrofluids of direct amine-functionalised γ-Fe₂O₃nanoparticles were preparedviaa novel and simple route. These nanoparticles showed enhanced thermal stability.

Recent advances in surface chemistry strategies for the fabrication of functional iron oxide based magnetic nanoparticles

The synthesis of superparamagnetic nanostructures, especially iron-oxide based nanoparticles (IONPs), with appropriate surface functional groups has been intensively researched for many high-technological applications, including high density data storage, biosensing and biomedicine. In medicine, IONPs are nowadays widely used as contrast agents for magnetic resonance imaging (MRI), in hyperthermia therapy, but are also exploited for drug and gene delivery, detoxification of biological fluids or immunoassays, as they are relatively non-toxic. The use of magnetic particles in vivo requires IONPs to have high magnetization values, diameters below 100 nm with overall narrow size distribution and long time stability in biological fluids. Due to the high surface energies of IONPs agglomeration over time is often encountered. It is thus of prime importance to modify their surface to prevent aggregation and to limit non-specific adsorption of biomolecules onto their surface. Such chemical modifications result in IONPs being well-dispersed and biocompatible, and allow for targeted delivery and specific interactions. The chemical nature of IONPs thus determines not only the overall size of the colloid, but also plays a significant role for in vivo and in vitro applications. This review discusses the different concepts currently used for the surface functionalization and coating of iron oxide nanoparticles. The diverse strategies for the covalent linking of drugs, proteins, enzymes, antibodies, and nucleotides will be discussed and the chemically relevant steps will be explained in detail.

Drug Embedded PVP Coated Magnetic Nanoparticles for Targeted Killing of Breast Cancer Cells

Magnetic drug targeting is a drug delivery system that can be used in loco-regional cancer treatment. Coated magnetic particles, called carriers, are very useful for delivering chemotherapeutic drugs. Magnetic carriers were synthesized by co-precipitation of iron oxide followed by coating with polyvinyl pyrrolidone (PVP). Characterization was performed using X-ray diffraction, TEM, TGA, FTIR and UV-Vis Spectroscopy. Magnetite (Fe3O4) remained as the core of the carrier. The amount of PVP bound to the iron oxide nanoparticles was estimated by thermogravimetric analysis (TGA) and the attachment of PVP to the iron oxide nanoparticles confirmed by FTIR analysis. The loading efficiency of Epirubicin hydrochloride onto the PVP coated and uncoated iron oxide nanoparticles was measured at intervals such as 1 hr and 24 hrs by UV-Vis Spectroscopy. The binding of Epirubicin hydrochloride to the PVP coated and uncoated iron oxide nanoparticles were confirmed by FTIR analysis. The present findings showed that Epirubicin hydrochloride loaded PVP coated iron oxide nanoparticles are promising for magnetically targeted drug delivery. The drug displayed increased cell cytotoxicity at lower concentrations when conjugated with the nanoparticles than being administered conventionally as individual drugs.

Chemical design of biocompatible iron oxide nanoparticles for medical applications

Iron oxide nanoparticles are one of the most versatile and safe nanomaterials used in medicine. Recent progress in nanochemistry enables fine control of the size, crystallinity, uniformity, and surface properties of iron oxide nanoparticles. In this review, the synthesis of chemically designed biocompatible iron oxide nanoparticles with improved quality and reduced toxicity is discussed for use in diverse biomedical applications.

Magnetic nanocarriers of doxorubicin coated with poly(ethylene glycol) and folic acid: relation between coating structure, surface properties, colloidal stability, and cancer cell targeting

We report the efficient one-step synthesis and detailed physicochemical evaluation of novel biocompatible nanosystems useful for cancer therapeutics and diagnostics (theranostics). These systems are the superparamagnetic iron oxide nanoparticles (SPIONs) carrying the anticancer drug doxorubicin and coated with the covalently bonded biocompatible polymer poly(ethylene glycol) (PEG), native and modified with the biological cancer targeting ligand folic acid (PEG-FA). These multifunctional nanoparticles (SPION-DOX-PEG-FA) are designed to rationally combine multilevel mechanisms of cancer cell targeting (magnetic and biological), bimodal cancer cell imaging (by means of MRI and fluorescence), and bimodal cancer treatment (by targeted drug delivery and by hyperthermia effect). Nevertheless, for these concepts to work together, the choice of ingredients and particle structure are critically important. Therefore, in the present work, a detailed physicochemical characterization of the organic coating of the hybrid nanoparticles is performed by several surface-specific instrumental methods, including surface-enhanced Raman scattering (SERS) spectroscopy, X-ray photoelectron spectrometry (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). We demonstrate that the anticancer drug doxorubicin is attached to the iron oxide surface and buried under the polymer layers, while folic acid is located on the extreme surface of the organic coating. Interestingly, the moderate presence of folic acid on the particle surface does not increase the particle surface potential, while it is sufficient to increase the particle uptake by MCF-7 cancer cells. All of these original results contribute to the better understanding of the structure-activity relationship for hybrid biocompatible nanosystems and are encouraging for the applications in cancer theranostics.

Preparation, characterization of 2-deoxy-D-glucose functionalized dimercaptosuccinic acid-coated maghemite nanoparticles for targeting tumor cells

PURPOSE

To report a modified preparation and to systematically study the structure, magnetic and other properties of γ-Fe(2)O(3)-DMSA-DG NPs (2-deoxy-D-glucose (2-DG) conjugated meso-2,3-dimercaptosuccinic acid coated γ-Fe(2)O(3) nanoparticles) and test its ability to improve Hela tumor cells targeting in vitro compared to the γ-Fe(2)O(3)-DMSA NPs.

METHODS

The conjugation of 2-DG on the surface of γ-Fe(2)O(3)-DMSA NPs was performed by esterification reaction and characterized. Acute toxicity was evaluated using MTT assay. Cellular uptake was investigated by Prussian blue staining and UV colorimetric assay.

RESULTS

DG was successfully functionalized onto the surface of γ-Fe(2)O(3)-DMSA NPs; binding efficiency was ~60%. The mean diameter of single core of γ-Fe(2)O(3)-DMSA-DG NPs was 10 nm. Particle size and polydispersity index of its aggregates were 156.2 nm and 0.162, respectively. 2-DG-conjugated nanoparticles caused little cytotoxic effects on Hela cells at the concentration range of 0-600 μg/mL. When 2-DG-conjuated and non-conjugated nanoparticles were incubated with Hela cells for 4, 8 and 12 h, the 2-DG-conjugated nanoparticle showed significant amount of uptake in cells compared to their non-targeted counterparts.

CONCLUSION

γ-Fe(2)O(3)-DMSA-DG NPs could be developed as a tumor-targeted probe for cervical cancer imaging and therapy.

The internalization pathway, metabolic fate and biological effect of superparamagnetic iron oxide nanoparticles in the macrophage-like RAW264.7 cell

The potential applications of superparamagnetic iron oxide nanoparticles (SPIONs) in several nanomedical fields have attracted intense interest based on the cell-nano interaction. However, the mechanisms underlying cell uptake, the intracellular trail, final fate and the biological effects of SPIONs have not yet been clearly elucidated. Here, we showed that multiple endocytic pathways were involved in the internalization process of SPIONs in the RAW264.7 macrophage. The internalized SPIONs were biocompatible and used three different metabolic pathways: The SPIONs were distributed to daughter cells during mitosis; they were degraded in the lysosome and free iron was released into the intracellular iron metabolic pool; and, the intact SPIONs were potentially exocytosed out of the cells. The internalized SPIONs did not induce cell damage but affected iron metabolism, inducing the upregulation of ferritin light chain at both the mRNA and protein levels and ferroportin 1 at the mRNA level. These results may contribute to the development of nanobiology and to the safe use of SPIONs in medicine when administered as a contrast medium or a drug delivery tool.

Single step hybrid coating process to enhance the electrosteric stabilization of inorganic particles

We report on a single-step coating process and the resulting colloidal stability of silica-coated spindle-type hematite nanoparticles (NPs) decorated with a layer of poly(acrylic acid) (PAA) polyelectrolyte chains that are partially incorporated into the silica shell. The stability of PAA coated NPs as a function of pH and salt concentration in water was compared to bare hematite particles and simple silica-coated hematite NPs, studying their electrophoretic mobility and the hydrodynamic radius by dynamic light scattering. Particles coated with this method were found to be more stable upon the addition of salt at pH 7, and their aggregation at the pH of the isoelectric point is reversible. The hybrid coating appears to increase the colloidal stability in aqueous media due to the combination of the decrease of the isoelectric point and the electrosteric stabilization. This coating method is not limited to hematite particles but can easily be adapted to any silica-coatable particle.

Uptake of dimercaptosuccinate-coated magnetic iron oxide nanoparticles by cultured brain astrocytes

Magnetic iron oxide nanoparticles (Fe-NP) are currently considered for various diagnostic and therapeutic applications in the brain. However, little is known on the accumulation and biocompatibility of such particles in brain cells. We have synthesized and characterized dimercaptosuccinic acid (DMSA) coated Fe-NP and have investigated their uptake by cultured brain astrocytes. DMSA-coated Fe-NP that were dispersed in physiological medium had an average hydrodynamic diameter of about 60 nm. Incubation of cultured astrocytes with these Fe-NP caused a time- and concentration-dependent accumulation of cellular iron, but did not lead within 6 h to any cell toxicity. After 4 h of incubation with 100-4000 µM iron supplied as Fe-NP, the cellular iron content reached levels between 200 and 2000 nmol mg⁻¹ protein. The cellular iron content after exposure of astrocytes to Fe-NP at 4 °C was drastically lowered compared to cells that had been incubated at 37 °C. Electron microscopy revealed the presence of Fe-NP-containing vesicles in cells that were incubated with Fe-NP at 37 °C, but not in cells exposed to the nanoparticles at 4 °C. These data demonstrate that cultured astrocytes efficiently take up DMSA-coated Fe-NP in a process that appears to be saturable and strongly depends on the incubation temperature.

Kinetic and regeneration studies of photocatalytic magnetic separable beads for chromium (VI) reduction under sunlight

Physical adsorption and photocatalytic reduction of Cr(VI) in magnetic separable beads were investigated. In order to elucidate the kinetics of photocatalytic process, operating parameters such as catalyst dosage and the initial concentration were examined in detail. It was observed that the reduction rate of Cr(VI) increased with an increase in the catalyst loading, as this translated into an increase in the number of available active sites. Critical scrutiny of the percentage of the initial reduction rate versus time at various initial concentration of Cr(VI) revealed that the rate of substrate conversion decreased as the initial concentration increased. The kinetic analysis of the photoreduction showed that the removal of Cr(VI) satisfactory obeyed the pseudo first-order kinetic according to the Langmuir-Hinshelwood (L-H) model and the absorption of Cr(VI) on the magnetic beads surfaces was the controlling step in the entire reduction process. Furthermore, desorption experiments by elution of the loaded gels with sodium hydroxide indicated that the magnetic photocatalyst beads could be reused without significant losses of their initial properties even after 3 adsorption-desorption cycles.

The magnetophoretic mobility and superparamagnetism of core-shell iron oxide nanoparticles with dual targeting and imaging functionality

With the goal to achieve highly efficacious MRI-monitored magnetic targeting, a novel drug carrier with dual nature of superior magnetophoretic mobility and superparamagnetism was synthesized. This carrier was specially designed in a core-shell structure. The core was achieved by utilizing a strategy of self-assembly of oppositely charged ultrafine superparamagnetic iron oxide nanoparticles previously prepared. The final particles were formed by coating such cores with carboxymethyldextran (CMD) polymer. By exclusion of non-magnetic materials from the interior part of the particles, this structure maximized the amount of magnetic material and thus yielded a superior magnetophoretic mobility. Such a strategy avoids the challenge of superparamagnetism loss, which would be caused by cores exceeding a critical domain size. Coating the self-assembled core enables the magnetic carrier to be stable upon usage and storage and to be readily linked with drug molecules for therapeutic applications. In vitro characterization showed that these nanoparticles displayed a 3- to 4-fold enhancement in magnetophoretic mobility, and a markedly improved stability when stored in 50% serum as a comparison of conventional iron oxide-based magnetic nanoparticles. Preliminary in vivo studies revealed that the nanoparticles also function well as a contrast enhancer for MR imaging of brain glioma. This technology could lead to the development of a new paradigm of magnetic carriers that meet with the needs of various clinical applications.

Size-tunable synthesis of stable superparamagnetic iron oxide nanoparticles for potential biomedical applications

Dextran-coated superparamagnetic nanoparticles (MNPs) have widespread biomedical applications. The superparamagnetic behavior, specifically regulated size, and smooth morphology are crucial requirements for essentially all of these applications. Presented herein is an innovative double-coating strategy that would allow for a size-controlled synthesis of MNPs. Small monocrystalline iron oxide nanoparticles (MIONs) were first synthesized, which served as the source of superparamagnetic properties. These MIONs were then treated in an acetate buffer containing biocompatible dextran polymer. Under such an environment, the colloidal MIONs would be quickly agglomerated by the acetate ions, and the formed coalescent body of MION would then be stabilized simultaneously by coating with dextran. By regulating the MION or dextran concentration as well as the thermal incubation time, the sizes of these first formed nanoparticles (termed 1st-NPs) could be readily controlled. A second dextran coating step was further applied to smoothen the 1st-NPs in attaining a final product (termed 2nd-NPs). The 2nd-NPs exhibited robust storage stability because of the additional coating shell. Results successfully confirmed the plausibility of this approach, as these MNPs displayed not only a smooth outline and a narrow size distribution but also the essential superparamagnetic behavior and a significantly prolonged stability on storage.

Synthesis of ultrasmall magnetic iron oxide nanoparticles and study of their colloid and surface chemistry

Colloidal nanoparticles of Fe(3)O(4) (4 nm) were synthesized by high-temperature hydrolysis of chelated iron (II) and (III) diethylene glycol alkoxide complexes in a solution of the parent alcohol (H(2)DEG) without using capping ligands or surfactants: [Fe(DEG)Cl(2)](2-) + 2[Fe(DEG)Cl(3)](2-) + 2H(2)O + 2OH(-) → Fe(3)O(4) + 3H(2)DEG + 8Cl(-) The obtained particles were reacted with different small-molecule polydentate ligands, and the resulting adducts were tested for aqueous colloid formation. Both the carboxyl and α-hydroxyl groups of the hydroxyacids are involved in coordination to the nanoparticles' surface. This coordination provides the major contribution to the stability of the ligand-coated nanoparticles against hydrolysis.

The Effect of Iron Oxide Magnetic Nanoparticles on Smooth Muscle Cells

Recently, magnetic nanoparticles of iron oxide (Fe₃O₄, γ-Fe₂O₃) have shown an increasing number of applications in the field of biomedicine, but some questions have been raised about the potential impact of these nanoparticles on the environment and human health. In this work, the three types of magnetic nanoparticles (DMSA-Fe₂O₃, APTS-Fe₂O₃, and GLU-Fe₂O₃) with the same crystal structure, magnetic properties, and size distribution was designed, prepared, and characterized by transmission electronic microscopy, powder X-ray diffraction, zeta potential analyzer, vibrating sample magnetometer, and Fourier transform Infrared spectroscopy. Then, we have investigated the effect of the three types of magnetic nanoparticles (DMSA-Fe₂O₃, APTS-Fe₂O₃, and GLU-Fe₂O₃) on smooth muscle cells (SMCs). Cellular uptake of nanoparticles by SMC displays the dose, the incubation time and surface property dependent patterns. Through the thin section TEM images, we observe that DMSA-Fe₂O₃is incorporated into the lysosome of SMCs. The magnetic nanoparticles have no inflammation impact, but decrease the viability of SMCs. The other questions about metabolism and other impacts will be the next subject of further studies.

The development of stable aqueous suspensions of PEGylated SPIONs for biomedical applications

We report here the development of stable aqueous suspensions of biocompatible superparamagnetic iron oxide nanoparticles (SPIONs). These so-called ferrofluids are useful in a large spectrum of modern biomedical applications, including novel diagnostic tools and targeted therapeutics. In order to provide prolonged circulation times for the nanoparticles in vivo, the initial iron oxide nanoparticles were coated with a biocompatible polymer poly(ethylene glycol) (PEG). To permit covalent bonding of PEG to the SPION surface, the latter was functionalized with a coupling agent, 3-aminopropyltrimethoxysilane (APS). This novel method of SPION PEGylation has been reproduced in numerous independent preparations. At each preparation step, particular attention was paid to determine the physico-chemical characteristics of the samples using a number of analytical techniques such as atomic absorption, Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy, transmission electron microscopy (TEM), photon correlation spectroscopy (PCS, used for hydrodynamic diameter and zeta potential measurements) and magnetization measurements. The results confirm that aqueous suspensions of PEGylated SPIONs are stabilized by steric hindrance over a wide pH range between pH 4 and 10. Furthermore, the fact that the nanoparticle surface is nearly neutral is in agreement with immunological stealthiness expected for the future biomedical applications in vivo.

[Molecular and parametric imaging with iron oxides]

Superparamagnetic iron oxide (SPIO) contrast agents, clinically established for high resolution magnetic resonance imaging of reticuloendothelial system containing anatomical structures, can additionally be exploited for the non-invasive characterization and quantification of pathology down to the molecular level. In this context, SPIOs can be applied for non-invasive cell tracking, quantification of tissue perfusion and target specific imaging, as well as for the detection of gene expression. This article provides an overview of new applications for clinically approved iron oxides as well of new, modified SPIO contrast agents for parametric and molecular imaging.

Preparation and properties of magnetic nano- and microsized particles for biological and environmental separations

The paper presents a critical overview on magnetic nanoparticles and microspheres used as separation media in different fields of chemistry, biochemistry, biology, and environment protection. The preparation of most widely used magnetic iron oxides in appropriate form, their coating or encapsulation in polymer microspheres, and functionalization is discussed in the first part. In the second part, new developments in the main application areas of magnetic composite particles for separation and catalytical purposes are briefly described. They cover separations and isolations of toxic inorganic and organic ions, proteins, and other biopolymers, cells, and microorganisms. Only selected number of relevant papers could be included due to the restricted extent of the review.

Preparation of anti-human cardiac troponin I immunomagnetic nanoparticles and biological activity assays

Maghemite nanoparticles (MNPs) were synthesized by chemical coprecipitation and coated with meso-2,3-dimercaptosuccinic acid (HOOC-CH(SH)-CH(SH)-COOH or DMSA). The morphology and properties of the nanoparticles were characterized by TEM, XRD, Zeta Potential Analyzer and VSM. Subsequentially, the anti-human cardiac troponin I (cTnI) immunomagnetic nanoparticles (IMNPs) were prepared by grafting anti-human cTnI antibodies on the surface of DMSA-coated MNPs using the linker of EDC (1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride). The conjugation amount of the antibodies and the activity of IMNPs was evaluated by enzyme linked immunosorbent assay (ELISA) and Western blotting. The results show that the physical and chemical adsorption occurred at the same time, but the former was unstable and apt to desorb, and the maximum conjugation amount of antibody was about 96 microg on the 0.1 mg MNPs by covalent bond. The stability was also investigated, and after 300 days the antibodies on the IMNPs remained the biological activity.