Effect of medium composition and temperature and pH changes on exopolysaccharide yields and stability during Streptococcus thermophilus LY03 fermentations

Exploring biosynthesis strategies to boost the yield of exopolysaccharide-protein blend from Bacillus arachidis SY8(T), an isolated native strain, as a potent adsorbent for heavy metals removal

This investigation centers on the synthesis of a polysaccharide-protein blend produced by an isolated native strain (99.12 % phylogenetic affinity with Bacillus arachidis SY8(T)). The primary objective was to investigate the production of extracellular polymeric substances (EPS) under diverse stress conditions, encompassing exposure to heavy metal ions, salt, and toxic agents. Additionally, the impact of environmental parameters, namely pH, inoculation percentage, and time, on the production was investigated. Subsequently, the study examined the biosorption potential of the EPS produced for Pb(II), Cu(II), and Mn(II). The EPS obtained was thoroughly characterized via various tests. Rheological evaluations of an EPS solution (2 wt%) confirmed its pseudo-plastic and non-Newtonian fluid properties, while TGA analysis demonstrated its thermal stability up to 600 °C. Additional analyses, including GPC, FTIR, and H-NMR, provide further insights into the produced EPS. The best conditions for EPS production are determined: 5 % NaCl salt, serving as an effective stress inducer, and 37 °C, pH 6, with a 5 % inoculation, over 96 h. EPS demonstrates remarkable removal efficiencies of 99.9, 99.4 and 78.9 % for Pb(II), Cu(II), and Mn(II), respectively. These findings highlight the potential of EPS as an effective agent for removing heavy metal ions.

Fermentative optimization and characterization of exopolysaccharides from Enterococcus faecium F58 isolated from traditional fresh goat cheese

This study focused on optimizing the fermentation-based production of Exopolysaccharides (EPS) from Enterococcus faecium F58 initially isolated from traditional Moroccan Jben, a fresh goat cheese. Using the central composite design, yeast extract, MnSO4, and time affect EPS concentration. The highest experimental and predicted EPS production yields were 2.46 g/L ± 0.38 and 2.86 g/L, respectively. Optimal concentrations of yeast extract (4.46 g/L) and MnSO4 (0.011 g/L) were identified after 26 h at 30 °C. Characterization of EPS was conducted using SEM with EDX, XRD, and FTIR analyses. These tests revealed a specific morphology and an amorphous structure. Additionally, thermogravimetric analysis indicated adequate EPS stability up to 200 °C with anti-adhesion properties against different pathogens. This study offers valuable insights into the optimized production of EPS from Enterococcus faecium F58, which exhibits significant structural and functional properties for various applications in the food and biotechnology industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01424-9.

Dextrans of Weissella cibaria DSM14295: Microbial production, structure and functionality

Lactic acid bacteria of the genus Weissella contribute to spontaneous fermentation in, e.g., sourdough or sauerkraut, but are not registered as starter cultures because of their pending safety assessment. Some strains are able to produce high amounts of exopolysaccharides. This study aims to demonstrate the techno-functionality of five dextrans from W. cibaria DSM14295, produced under varying cultivation conditions, with respect to structural and macromolecular properties. A maximum of 23.1 g/L dextran was achieved by applying the "cold shift" temperature regime. The dextrans differed in molecular mass (9-22∙108 Da, determined by HPSEC-RI/MALLS), intrinsic viscosity (52-73 mL/g), degree of branching (3.8-5.7 % at position O3, determined by methylation analysis) and their side chain length and architecture, determined by HPAEC-PAD after enzymatic hydrolysis. Stiffness of acid gels from milk spiked with these dextrans increased linearly with dextran concentration. Principal component analysis showed that dextrans produced in a semi-defined medium are primarily described by moisture sorption and branching properties, whereas dextrans produced in whey permeate were similar because of their functional and macromolecular properties. Overall, dextrans from W. cibaria DSM14295 have a high potential because of the high production yield and their functionality which can be tailored by the conditions during fermentation.

Feeding Lactic Acid Bacteria with Different Sugars: Effect on Exopolysaccharides (EPS) Production and Their Molecular Characteristics

Exopolysaccharides (EPS) are complex molecules produced by some microorganisms and used in foods as texturizers and stabilizers, their properties depending on their chemical structure. In this work, three different lactic acid bacteria (LAB), were tested for their ability to produce EPS, by using five different mono- and disaccharides as their sole carbon source. The growth and acidifying ability were analysed, the EPSs were quantified by the official method AOAC 991.43, and their chemical structure was investigated. The amount of EPS varied from 0.71 g/L to 2.38 g/L, and maltose was the best sugar for EPS production by Lacticaseibacillus paracasei 2333. Lacticaseibacillus rhamnosus 1019 produced the highest amount when fed with lactose, whereas the EPS amount of Lactobacillus bulgaricus 1932 was not significantly different depending on the sugar type. The EPS chains consisted of fructose, galactose, glucose, mannose, ribose, glucosamine, galactosamine, and in some cases rhamnose in different proportions, depending on the strain and carbon source. The molecular weight of EPS ranged from <10 KDa to >500 KDa and was again highly dependent on the strain and the sugar used, suggesting the possibility of growing different strains under different conditions to obtain EPS with different potential applications in the food system.

Characterisation of recombinant GH 3 β-glucosidase from β-glucan producing Levilactobacillus brevis TMW 1.2112

Levilactobacillus (L.) brevis TMW 1.2112 is an isolate from wheat beer that produces O2-substituted (1,3)-β-D-glucan, a capsular exopolysaccharide (EPS) from activated sugar nucleotide precursors by use of a glycosyltransferase. Within the genome sequence of L. brevis TMW 1.2112 enzymes of the glycoside hydrolases families were identified. Glycoside hydrolases (GH) are carbohydrate-active enzymes, able to hydrolyse glycosidic bonds. The enzyme β-glucosidase BglB (AZI09_02170) was heterologous expressed in Escherichia coli BL21. BglB has a monomeric structure of 83.5 kDa and is a member of the glycoside hydrolase family 3 (GH 3) which strongly favoured substrates with β-glycosidic bonds. Km was 0.22 mM for pNP β-D-glucopyranoside demonstrating a high affinity of the recombinant enzyme for the substrate. Enzymes able to degrade the (1,3)-β-D-glucan of L. brevis TMW 1.2112 have not yet been described. However, BglB showed only a low hydrolytic activity towards the EPS, which was measured by means of the D-glucose releases. Besides, characterised GH 3 β-glucosidases from various lactic acid bacteria (LAB) were phylogenetically analysed to identify connections in terms of enzymatic activity and β-glucan formation. This revealed that the family of GH 3 β-glucosidases of LABs comprises most likely exo-active enzymes which are not directly associated with the ability of these LAB to produce EPS.

Exopolysaccharides of Lactic Acid Bacteria: Production, Purification and Health Benefits towards Functional Food

Lactic acid bacteria (LAB) are capable of synthesising metabolites known as exopolysaccharides (EPS) during fermentation. Traditionally, EPS plays an important role in fermented dairy products through their gelling and thickening properties, but they can also be beneficial to human health. This bioactivity has gained attention in applications for functional foods, which leads them to have prebiotic, immunomodulatory, antioxidant, anti-tumour, cholesterol-lowering and anti-obesity activity. Understanding the parameters and conditions is crucial to optimising the EPS yields from LAB for applications in the food industry. This review provides an overview of the functional food market together with the biosynthesis of EPS. Factors influencing the production of EPS as well as methods for isolation, characterisation and quantification are reviewed. Finally, the health benefits associated with EPS are discussed.

Proteomic Analysis Reveals Enzymes for β-D-Glucan Formation and Degradation in Levilactobacillus brevis TMW 1.2112

Bacterial exopolysaccharide (EPS) formation is crucial for biofilm formation, for protection against environmental factors, or as storage compounds. EPSs produced by lactic acid bacteria (LAB) are appropriate for applications in food fermentation or the pharmaceutical industry, yet the dynamics of formation and degradation thereof are poorly described. This study focuses on carbohydrate active enzymes, including glycosyl transferases (GT) and glycoside hydrolases (GH), and their roles in the formation and potential degradation of O2-substituted (1,3)-β-D-glucan of Levilactobacillus (L.) brevis TMW 1.2112. The fermentation broth of L. brevis TMW 1.2112 was analyzed for changes in viscosity, β-glucan, and D-glucose concentrations during the exponential, stationary, and early death phases. While the viscosity reached its maximum during the stationary phase and subsequently decreased, the β-glucan concentration only increased to a plateau. Results were correlated with secretome and proteome data to identify involved enzymes and pathways. The suggested pathway for β-glucan biosynthesis involved a β-1,3 glucan synthase (GT2) and enzymes from maltose phosphorylase (MP) operons. The decreased viscosity appeared to be associated with cell lysis as the β-glucan concentration did not decrease, most likely due to missing extracellular carbohydrate active enzymes. In addition, an operon was discovered containing known moonlighting genes, all of which were detected in both proteome and secretome samples.

Exopolysaccharides synthesized by lactic acid bacteria: biosynthesis pathway, structure-function relationship, structural modification and applicability

Probiotics and their fermentation products are increasingly been focused on due to their health-boosting effects. Exopolysaccharides (EPS) synthetized by lactic acid bacteria (LAB) are widely applied as texture modifiers in dairy, meat and bakery products owning to their improved properties. Moreover, LAB-derived EPS have been confirmed to possess diverse physiological bioactivities including antioxidant, anti-biofilm, antiviral, immune-regulatory or antitumor. However, the low production and high acquisition cost hinder their development. Even though LAB-derived EPS have been extensively studied for their production-improving, there are only few reports on the systematic elucidation and summary of the relationship among biosynthesis pathway, strain selection, production parameter, structure-function relationship. Therefore, a detailed summary on biosynthesis pathway, production parameter and structure-function relationship of LAB-derived EPS is provided in this review, the structural modifications together with the current and potential applications are also discussed in this paper.

Lacticaseibacillus rhamnosus GG Survival and Quality Parameters in Kefir Produced from Kefir Grains and Natural Kefir Starter Culture

The study aimed to determine the effect of starter cultures (kefir grains and natural kefir starter culture without grains) on Lacticaseibacillus rhamnosus GG (LGG) survival and on the quality characteristics of kefir. To this end, the viability of probiotic L. rhamnosus GG strain and the rheological properties and quality parameters of kefir beverages were tested during storage over 21 days at 4 °C. The final LGG counts were 7.71 and 7.55 log cfu/mL in natural kefir starter culture and kefir grain, respectively. When prepared with probiotic bacteria, the syneresis values of kefir prepared using natural kefir starter culture was significantly lower (p < 0.05) than that of kefir made using grains. However, the viscosity indices, hysteresis loop, and dynamic moduli were similar between kefir made with natural kefir starter culture and other kefir formulations (p > 0.05). Moreover, all samples showed shear-thinning behavior. The flavor scores for kefir prepared using natural kefir starter culture were significantly higher than for the other samples (p < 0.05), but overall acceptability was similar at the 10-day assessment across both starters (with and without grain) after the addition of probiotic bacteria (p > 0.05). Overall, the results indicate that natural kefir starter culture could be a potential probiotic carrier.

Food wastes as natural sources of lactic acid bacterial exopolysaccharides for the functional food industry: A review

Exopolysaccharides (EPSs) synthesized by lactic acid bacteria (LAB), have recently received much interest because of their various functional features in several industries. Food wastes (FWs) have become a major source of worry, as they can cause serious environmental contamination if improperly disposed. The utilization of these FWs is an excellent choice (approach) for producing value-added products such as EPSs, which will efficiently remediate wastes. The overall EPSs yield for the selected producers is strain-specific, and is heavily influenced by the nutritional and growing conditions used. This review emphasizes what is currently known about LAB's ability to generate economically relevant EPSs from FWs. In addition, a concise overview of the food industry, packaging, pharmaceutical and clinical applications application is discussed.

Lactic Acid Bacteria Exopolysaccharides Producers: A Sustainable Tool for Functional Foods

Lactic acid bacteria (LAB) used in the food industry, mainly for the production of dairy products, are able to synthetize exopolysaccharides (EPS). EPS play a central role in the assessment of rheological and sensory characteristics of dairy products since they positively influence texture and organoleptic properties. Besides these, EPS have gained relevant interest for pharmacological and nutraceutical applications due to their biocompatibility, non-toxicity and biodegradability. These bioactive compounds may act as antioxidant, cholesterol-lowering, antimicrobial and prebiotic agents. This review provides an overview of exopolysaccharide-producing LAB, with an insight on the factors affecting EPS production, their dairy industrial applications and health benefits.

Physicochemical analysis, proteolysis activity and exopolysaccharides production of herbal yogurt fortified with plant extracts

Yogurt production with starter culture at 41 °C in the presence of plant water extracts (Momordica grosvenori, Psidium guajava, Lycium barbarum or Garcinia mangostana) were studied to examine the effects on acidification, physicochemical properties, microbial growth, proteolytic activity, and exopolysaccharide (EPS) content. All plant-based yogurt reached a pH of 4.5 faster (300–330 min) than plain-yogurt (360 min). All plant water extracts stimulated Lactobacillus spp. (∼7.4 log10 CFU/mL) and Streptococcus thermophilus (8.20–8.50 log10 CFU/mL) growth except for G. mangostana which marginally inhibited Lactobacillus spp. growth (7.21 log10 CFU/mL). M. grosvenori, L. barbarum, and G. mangonstana were significantly affected proteolysis of milk proteins (46.2 ± 0.8, 39.9 ± 0.5, & 35.8 ± 0.1 µg/mL; respectively) compared to plain-yogurt (26.3 ± 0.4 µg/mL). The presence of G. mangostana and L. barbarum resulted in an increase (p < 0.05) of total solids content (∼15.0%) and water holding capacity in yogurt (28.1 ± 1.2 & 26.5 ± 0.3%; respectively; p < 0.05). In addition, M. grosvenori water extract enhanced (p < 0.05) syneresis of yogurt (1.78 ± 0.30%). L. barbarum yogurt showed the highest EPS concentration (220.9 ± 12.4 µg/L) among yogurt samples. In conclusion, the presence of plant water extracts positively altered yogurt fermentation, enhanced proteolysis of milk protein, and induced EPS production.

Exopolysaccharides from Lactobacillus kiferi as adjuvant enhanced the immuno-protective against Staphylococcus aureus infection

Exopolysaccharides from lactic acid bacteria (LAB) have gained more attention due to their health benefits. Most research on LAB EPS focuses on antitumor and antioxidant activities. To our knowledge, the immunoadjuvant activity of LAB EPS has not been thoroughly studied. In this study, the EPS produced by Lactobacillus kiferi WXD029 were purified by ethanol precipitation and column chromatography fractionation. The molecular weight of the EPS was 3.423 × 10⁵ Da and was mainly composed of Glu, GlcN, and GalN in a molar ratio of 3.1:1:1. In vitro, EPS could significantly enhance the proliferation and phagocytic activity as well as induce the production of NO, TNF-α, IL-1β, and IL-6 in RAW264.7 cells. In vivo, the EPS adjuvant could increase the titers of S.aureus antigen-specific antibodies and markedly enhanced T cell proliferation. Notably, EPS adjuvant also induced a strong potential Th1, Th2 and Th17-cell mixture responses. Furthermore, immunization with S.aureus antigen plus EPS adjuvant induced a protective effect when compared with S.aureus antigen alone in murine bacteremia, pneumonia and mastitis model. Collectively, these results suggest that EPS derived from probiotic Lactobacillus kiferi strain is promising as an efficient adjuvant candidate for the prevention of S. aureus infections.

Production and molecular structure of heteropolysaccharides from two lactic acid bacteria

In the dairy industry, exopolysaccharides (EPS) produced in situ from lactic acid bacteria are of great interest because of their contribution to product texture. Some EPS cause ropiness which might be linked to specific physical and chemical EPS properties. EPS show a broad variety of chemical structures and, because analysis is rather complex, it is still a major challenge to establish structure-function relationships. The aim of this study was to produce EPS with different degree of ropiness, perform in-depth structural elucidations and relate this information to their behaviour in aqueous solutions. After cultivation of Streptococcus thermophilus DGCC7919 and Lactococcus lactis LL-2A and subsequent EPS isolation, both EPS showed similar macromolecular properties, but pronounced differences in monosaccharide composition and glycosidic linkages. Our data suggests that mainly the side chains in the EPS from LL-2A might be responsible for a higher ropiness than that observed for EPS from DGCC7919.

Influence of different culture conditions on exopolysaccharide production by indigenous lactic acid bacteria isolated from pickles

The objective of this study was to assess the effects of some culture conditions [temperature (20, 30, 37 °C), incubation time (48, 72, 120 h), pH (5.0, 6.0, 7.0), NaCl concentration (0, 3, 6%), carbon (glucose, fructose, lactose), nitrogen (sodium nitrate, ammonium sulfate, bacto-peptone), and mineral sources (calcium carbonate, ferric chloride)] on the exopolysaccharide (EPS) production by lactic acid bacteria (LAB) strains (belonging to Lactobacillus (L.) plantarum, L. namurensis, and Pediococcus (P.) ethanolidurans species) isolated from naturally fermented pickles. The maximum EPS production was determined at 30 °C and pH 6.0. The highest amount of EPS was obtained after 120 h of incubation, with glucose as carbon source, bacto-peptone as nitrogen source and calcium carbonate as mineral source for most of the tested strains. The EPS formation was not stimulated by NaCl, indicating that EPS formation of the tested strains was not a stress response. L. plantarum MF460 produced the highest amount of EPS at 30 °C after 48 h of incubation, which was 515.48 mg/L. One of the most pronounced results of this study was that the EPS production of L. plantarum MF556 strain was increased up to 512.81 mg/L with the addition of calcium carbonate to MRS medium. The effect of different culture conditions, particularly of incubation time, carbon, nitrogen, and mineral sources, on the EPS production often vary depending on the strain. Therefore, these apparent strain specific results demonstrated that the optimum culture conditions for the enhanced EPS production should be specifically determined for each LAB strain.

Two-step production of anti-inflammatory soluble factor by Lactobacillus reuteri CRL 1098

We have demonstrated previously that a soluble factor (LrS) produced by Lactobacillus (L.) reuteri CRL 1098 modulates the inflammatory response triggered by lipopolysaccharide. In this study, the production of LrS by L. reuteri CRL 1098 was realized through two steps: i) bacterial biomass production, ii) LrS production, where the bacterial biomass was able to live but did not proliferate. Therefore, the simultaneous evaluation of the effect of different factors on the growth and LrS production was performed. Biomass production was found to be dependent mainly on culture medium, while LrS production with anti-inflammatory activity depended on culture conditions of the biomass such as pH, agitation and growth phase. The L. reuteri CRL 1098 biomass and LrS production in the optimized culture media designed for this work reduced the complete process cost by approximately 95%, respectively to laboratory scale cost.

Comparative mRNA-Seq Analysis Reveals the Improved EPS Production Machinery in Streptococcus thermophilus ASCC 1275 During Optimized Milk Fermentation

Exo-polysaccharide (EPS) produced by dairy starters plays critical roles in improving texture and functionalities of fermented dairy products. One of such high EPS producers, Streptococcus thermophilus ASCC 1275 (ST1275) was used as a model dairy strain to understand the stimulation of its EPS production under optimal milk fermentation conditions. The mRNA-seq analysis and targeted pathway analysis indicate that genes associated with lactose (milk sugar) catabolism, EPS assembly, proteolytic activity, and arginine/methionine/cysteine synthesis and transport in ST1275 were significantly up-regulated under the optimized conditions of pH 5.5, 40°C, or WPI supplementation compared to that of pH 6.5 and 37°C, respectively. This indicates that genes involved in above metabolisms cooperate together for improving EPS yield from ST1275. This study provides a global view map on potential targeted pathways and specific genes accounted for enhanced EPS production in Str. thermophilus and that could be modulated by fermentation conditions.

Effect of repeat unit structure and molecular mass of lactic acid bacteria hetero-exopolysaccharides on binding to milk proteins

Interactions of exopolysaccharides and proteins are of great importance in food science, but complicated to analyze and quantify at the molecular level. A surface plasmon resonance procedure was established to characterize binding of seven structure-determined, branched hetero-exopolysaccharides (HePSs) of 0.14-4.9MDa from lactic acid bacteria to different milk proteins (β-casein, κ-casein, native and heat-treated β-lactoglobulin) at pH 4.0-5.0. Maximum binding capacity (RU_max) and apparent affinity (K_A,app) were HePS- and protein-dependent and varied for example 10- and 600-fold, respectively, in the complexation with native β-lactoglobulin at pH 4.0. Highest RU_max and K_A,app were obtained with heat-treated β-lactoglobulin and β-casein, respectively. Overall, RU_max and K_A,app decreased 6- and 20-fold, respectively, with increasing pH from 4.0 to 5.0. K_A,app was influenced by ionic strength and temperature, indicating that polar interactions stabilize HePS-protein complexes. HePS size as well as oligosaccharide repeat structure, conferring chain flexibility and hydrogen bonding potential, influence the K_A,app.

Technological, rheological and sensory characterizations of a yogurt containing an exopolysaccharide extract from Lactobacillus fermentum Lf2, a new food additive

Lactobacillus fermentum Lf2, an autochthonous strain isolated as a non starter culture in Cremoso cheese, produces high EPS levels (~1g/L) in optimized conditions (SDM broth, pH6.0, 30°C, 72h). Technological (texture profile and rheological analysis) and sensory properties of non-fat yogurts with 300 and 600mg EPS/L were studied at 3 and 25days after manufacture. Yogurts with different EPS concentrations showed higher hardness values than the control group at both periods of time, being the only significant difference that remained stable during time. The consistency index was also higher for the treated samples at both times evaluated, being significantly different for samples with 300mg/L of EPS extract, while the flow behavior index was lower for EPS-added yogurts. The thixotropic index was lower (P<0.05) for samples with the highest EPS extract concentration at the end of the storage time. Regarding the sensory analysis, those yogurts with 600mg/L of EPS extract presented the highest values of consistency at 3days of storage. No considerable differences for defects (milk powder, acid, bitter and cooked milk flavors) were perceived between treated and control samples at both times evaluated. Syneresis was also studied and samples with 600mg/L of EPS extract presented the lowest syneresis values at 25days of storage, which considerably decreased with the time of storage. In conclusion, the EPS from L. fermentum Lf2, used as an additive, provided yogurt with creamy consistency and increased hardness, without the presence of unwanted defects and improving the water holding capacity of the product. All the analysis done showed the potential of this extract to be used as a technofunctional natural ingredient, and it should be considered its positive impact on health, according to previous studies.

The effect of proteolytic activity of starter cultures on technologically important properties of yogurt

In this study, the effects of proteolytic activity of yogurt starter bacteria on physicochemical and technological properties of yogurt were investigated. Moreover, impact of proteolytic activity and production of exopolysaccharide (EPS) on the performance of each strain were screened. In order to compare the textural properties of yogurt samples, four parameters were evaluated: syneresis, water-holding capacity, cohesiveness, and hardness. Results showed that strains with high proteolytic activity had lower acidifying activity during fermentation and storage. Samples containing EPS-producing starter cultures had low proteolytic activity except samples K, L, and M. These differences related to nature and characteristics of each strain. Counts of starter cultures in samples produced using strains with high proteolytic activity were higher than other samples. Textural analysis data showed significant differences (p < .05) among strains in the four tested parameters. Strains with high proteolytic activity showed lower texture properties than other samples. Evaluation of sensory characteristics also showed samples prepared using strains with low or medium proteolytic activity and produced with EPS-producing strains have higher overall acceptability than other samples. Accordingly, microbial, physicochemical, and sensory properties of produced yogurts confirm that proteolytic activity is one of the most effective factors in quality of product and performance of each strain.

Functional and bioinformatics analysis of an exopolysaccharide-related gene (epsN) from Lactobacillus kefiranofaciens ZW3

A novel lactic acid bacteria strain Lactobacillus kefiranofaciens ZW3 exhibited the characteristics of high production of exopolysaccharide (EPS). The epsN gene, located in the eps gene cluster of this strain, is associated with EPS biosynthesis. Bioinformatics analysis of this gene was performed. The conserved domain analysis showed that the EpsN protein contained MATE-Wzx-like domains. Then the epsN gene was amplified to construct the recombinant expression vector pMG36e-epsN. The results showed that the EPS yields of the recombinants were significantly improved. By determining the yields of EPS and intracellular polysaccharide, it was considered that epsN gene could play its Wzx flippase role in the EPS biosynthesis. This is the first time to prove the effect of EpsN on L. kefiranofaciens EPS biosynthesis and further prove its functional property.

Production, properties, and industrial food application of lactic acid bacteria-derived exopolysaccharides

Exopolysaccharides (EPS)-producing lactic acid bacteria (LAB) are industrially important microorganisms in the development of functional food products and are used as starter cultures or coadjutants to develop fermented foods. There is large variability in EPS production by LAB in terms of chemical composition, quantity, molecular size, charge, presence of side chains, and rigidity of the molecules. The main body of the review will cover practical aspects concerning the structural diversity structure of EPS, and their concrete application in food industries is reported in details. To strengthen the food application and process feasibility of LAB EPS at industrial level, a future academic research should be combined with industrial input to understand the technical shortfalls that EPS can address.

Enhancement of Exopolysaccharide Production of Lactobacillus fermentum TDS030603 by Modifying Culture Conditions

To optimize culture conditions that enhance production of a highly viscous exopolysaccharide of Lactobacillus fermentum TDS030603, a chemically defined medium was examined. The best yield was found to be 199 ± 23 mg/l when 48-hr cultivation was microaerobically performed at 30°C in the chemically defined medium supplemented with 5% glucose and 1% ammonium citrate without pH control. In response to the optimized exopolysaccharide production, the mRNA expression levels of epsB, epsE, and epsG elevated significantly. Our results indicated that the optimal C/N ratio and/or microaerobic condition can alter the expression levels of several exopolysaccharide biosynthesis-related genes promoting the exopolysaccharide production yield.

Characterization and biocompatibility of glucan: a safe food additive from probiotic Lactobacillus plantarum DM5

BACKGROUND

Exopolysaccharide produced by lactic acid bacteria are the subject of an increasing number of studies for their potential applications in the food industry as stabilizing, bio-thickening and immunostimulating agents. In this regard, the authors isolated an exopolysaccharide producing probiotic lactic acid bacterium from fermented beverage Marcha of north eastern Himalayas.

RESULTS

The isolate Lactobacillus plantarum DM5 showed extracellular glucansucrase activity of 0.48 U mg⁻¹ by synthesizing natural exopolysaccharide glucan (1.87 mg mL⁻¹) from sucrose. Zymogram analysis of purified enzyme confirms the presence of glucosyltransferase of approximately 148 kDa with optimal activity of 18.7 U mg⁻¹ at 30 °C and pH 5.4. The exopolysaccharide was purified by gel permeation chromatography and had an average molecular weight of 1.11 × 10⁶ Da. Acid hydrolysis and structural characterization of exopolysaccharide revealed that it was composed of d-glucose residues, containing 86.5% of α-(1→6) and 13.5% of α-(1→3) linkages. Rheological study exhibited a shear thinning effect of glucan appropriate for food additives. A cytotoxicity test of glucan on human embryonic kidney 293 (HEK 293) and human cervical cancer (HeLa) cell lines revealed its nontoxic biocompatible nature.

CONCLUSION

This is the first report on the structure and biocompatibility of homopolysaccharide α-D-glucan (dextran) from probiotic Lactobacillus plantarum strain and its unique physical and rheological properties that facilitate its application in the food industry as viscosifying and gelling agent.