Ion-exchange fibers and drugs: an equilibrium study

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

Hydrolyzed Poly(acrylonitrile) Electrospun Ion-Exchange Fibers

A potential ion-exchange material was developed from poly(acrylonitrile) fibers that were prepared by electrospinning followed by alkaline hydrolysis (to convert the nitrile group to the carboxylate functional group). Characterization studies performed on this material using X-ray photoelectron spectroscopy, scanning electron microscopy, Fourier-Transform infra-red spectroscopy, and ion chromatography confirmed the presence of ion-exchange functional group (carboxylate). Optimum hydrolysis conditions resulted in an ion-exchange capacity of 2.39 meq/g. Ion-exchange fibers were used in a packed-bed column to selectively remove heavy-metal cation from the background of a benign, competing cation at a much higher concentration. The material can be efficiently regenerated and used for multiple cycles of exhaustion and regeneration.

Loading and release of amine drugs by ion-exchange fibers: role of amine type

With more production and application of ion-exchange fibers (IEFs), it becomes necessary to understand the interaction between IEFs and amine compounds, an important group of organic drugs and structural components of large organic molecules in biological systems. However, so far few experimental studies have been conducted to systematically investigate the exchanging mechanism of amine compounds to IEFs. Therefore, 15 amine drugs were selected to investigate the effect of amine type on the loading and release of them from the related IEFs. Loading affinity of these drugs by IEFs decreased in the order of secondary, tertiary, and primary. The following items: basicity, aromaticity, molar volume, rotatability, and so on, were emphatically discussed to address the underlying mechanism of drug loading and releasing extent and rate of IEFs. It was evident that strong alkaline drugs strengthened the ionic bond between the amine groups and IEFs, and thus the loading affinity. These results will advance the understanding of the exchanging behavior of IEFs in the drug delivery system.

Thermosensitive mPEG-b-PA-g-PNIPAM comb block copolymer micelles: effect of hydrophilic chain length and camptothecin release behavior

PURPOSE

Block copolymer micelles are extensively used as drug controlled release carriers, showing promising application prospects. The comb or brush copolymers are especially of great interest, whose densely-grafted side chains may be important for tuning the physicochemical properties and conformation in selective solvents, even in vitro drug release. The purpose of this work was to synthesize novel block copolymer combs via atom transfer radical polymerization, to evaluate its physicochemical features in solution, to improve drug release behavior and to enhance the bioavailablity, and to decrease cytotoxicity.

METHODS

The physicochemical properties of the copolymer micelles were examined by modulating the composition and the molecular weights of the building blocks. A dialysis method was used to load hydrophobic camptothecin (CPT), and the CPT release and stability were detected by UV-vis spectroscopy and high-performance liquid chromatography, and the cytotoxicity was evaluated by MTT assays.

RESULTS

The copolymers could self-assemble into well-defined spherical core-shell micelle aggregates in aqueous solution, and showed thermo-induced micellization behavior, and the critical micelle concentration was 2.96-27.64 mg L(-1). The micelles were narrow-size-distribution, with hydrodynamic diameters about 128-193 nm, depending on the chain length of methoxy polyethylene glycol (mPEG) blocks and poly(N-isopropylacrylamide) (PNIPAM) graft chains or/and compositional ratios of mPEG to PNIPAM. The copolymer micelles could stably and effectively load CPT but avoid toxicity and side-effects, and exhibited thermo-dependent controlled and targeted drug release behavior.

CONCLUSIONS

The copolymer micelles were safe, stable and effective, and could potentially be employed as CPT controlled release carriers.

Fabrication and evaluation of cationic exchange nanofibers for controlled drug delivery systems

The number of ion exchange fibers in development has increased over the last several years. However, few studies have reported the use ion-exchange fibers in drug delivery system. In this study polystyrene nanofiber ion exchangers (PSNIE) were fabricated by electrospinning techniques, crosslinking and sulfonation. The degree of crosslinking and the ion exchange capacity (IEC) were determined. The morphology and diameter of the nanofiber mats were analyzed using scanning electron microscopy (SEM). Five cationic model drugs (dextromethorphan, chlorpheniramine, diphenhydramine, propranolol and salbutamol) were loaded into PSNIE. The loading capacity, release and release kinetics of the exchangers were investigated. PSNIE were successfully prepared by electrospinning and were allowed to crosslink for 10 min, resulting in a maximum IEC of 2.86±0.1 meq/g dry PSNIE. The diameter of the fibers after sulfonation was 464±35 nm. Dextromethorphan provided the highest loading in PSNIE while diphenhydramine gave the highest percentage release in both simulated gastric and intestinal fluid (SGF and SIF). The release kinetics of all drugs in SGF and SIF provided the best fit with the particle diffusion model. Our results showed that the development of a PSNIE-based drug delivery system was successful, and PSNIE were able to control drug release.

Ion-exchange and iontophoresis-controlled delivery of apomorphine

The objective of this study was to test a drug delivery system that combines iontophoresis and cation-exchange fibers as drug matrices for the controlled transdermal delivery of antiparkinsonian drug apomorphine. Positively charged apomorphine was bound to the ion-exchange groups of the cation-exchange fibers until it was released by mobile counter-ions in the external solution. The release of the drug was controlled by modifying either the fiber type or the ionic composition of the external solution. Due to high affinity of apomorphine toward the ion-exchanger, a clear reduction in the in vitro transdermal fluxes from the fibers was observed compared to the respective fluxes from apomorphine solutions. Changes in the ionic composition of the donor formulations affected both the release and iontophoretic flux of the drug. Upon the application of higher co-ion concentrations or co-ions of higher valence in the donor formulation, the release from the fibers was enhanced, but the iontophoretic steady-state flux was decreased. Overall, the present study has demonstrated a promising approach using ion-exchange fibers for controlling the release and iontophoretic transdermal delivery of apomorphine.

Calcium binding and ionic conduction in single conical nanopores with polyacid chains: model and experiments

Calcium binding to fixed charge groups confined over nanoscale regions is relevant to ion equilibrium and transport in the ionic channels of the cell membranes and artificial nanopores. We present an experimental and theoretical description of the dissociation equilibrium and transport in a single conical nanopore functionalized with pH-sensitive carboxylic acid groups and phosphonic acid chains. Different phenomena are simultaneously present in this basic problem of physical and biophysical chemistry: (i) the divalent nature of the phosphonic acid groups fixed to the pore walls and the influence of the pH and calcium on the reversible dissociation equilibrium of these groups; (ii) the asymmetry of the fixed charge density; and (iii) the effects of the applied potential difference and calcium concentration on the observed ionic currents. The significant difference between the carboxylate and phosphonate groups with respect to the calcium binding is clearly observed in the corresponding current-voltage (I-V) curves and can be rationalized by using a simple molecular model based on the grand partition function formalism of statistical thermodynamics. The I-V curves of the asymmetric nanopore can be described by the Poisson and Nernst-Planck equations. The results should be of interest for the basic understanding of divalent ion binding and transport in biological ion channels, desalination membranes, and controlled drug release devices.

Removal of charged micropollutants from water by ion-exchange polymers -- effects of competing electrolytes

A wide variety of environmental compounds of concern, e.g. pharmaceuticals or illicit drugs, are acids or bases that may predominantly be present as charged species in drinking water sources. These charged micropollutants may prove difficult to remove by currently used water treatment steps (e.g. UV/H(2)O(2), activated carbon (AC) or membranes). We studied the sorption affinity of some ionic organic compounds to both AC and different charged polymeric materials. Ion-exchange polymers may be effective as additional extraction phases in water treatment, because sorption of all charged compounds to oppositely charged polymers was stronger than to AC, especially for the double-charged cation metformin. Tested below 1% of the polymer ion-exchange capacity, the sorption affinity of charged micropollutants is nonlinear and depends on the composition of the aqueous medium. Whereas oppositely charged electrolytes do not impact sorption of organic ions, equally charged electrolytes do influence sorption indicating ion-exchange (IE) to be the main sorption mechanism. For the tested polymers, a tenfold increased salt concentration lowered the IE-sorption affinity by a factor two. Different electrolytes affect IE with organic ions in a similar way as inorganic ions on IE-resins, and no clear differences in this trend were observed between the sulphonated and the carboxylated cation-exchanger. Sorption of organic cations is five fold less in Ca(2+) solutions compared to similar concentrations of Na(+), while that of anionic compounds is three fold weaker in SO(4)(2-) solutions compared to equal concentrations of Cl(-).

Hybrid Anion Exchange Hollow Fiber Membrane for Delivery of Ionic Drugs

Hybrid anion exchange hollow fiber membranes (HAEHFMs) based on bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) are proposed as potential drug carriers for four anionic model drugs, including the sodium salts of benzoate (NaBS), salicylate (NaSA), meta-amino salicylate (NaMAS), and loxoprofen (NaLS). The results of the static loading and release experiments suggest that electrostatic interaction, hydrogen bonding, and hydrophobic interaction are the main interaction patterns between the membrane and the drugs. And they are directly influenced by the external phase conditions and the drug physicochemical characteristics, such as structure, molecular weight, dissociation (pKa), and hydrogen bonding capability. Among the four different drugs, NaSA and NaMAS appear to be the most suitable for controlled release by the HAEHFM due to their excellent adsorption/release behaviors.

Interaction of a new surface sensitive probe compound with anionic surfactants of varying hydrophobic chain length

The amide derivative of a bis-phenylethynyl compound meta linked to 2,6-pyridine (BPEAP) poses inherent equilibrium between its neutral and zwitterionic forms in the excited state. BPEAP has been found to bind to the surface of anionic micelles instead of penetrating inside. This phenomenon has been exploited to attempt controlling the process of equilibrium using sodium dodecyl sulfate (SDS) at its pre-micellar and near-micellar aggregation concentrations. The anionic surfactant has been found to alter the equilibrium between the said forms of BPEAP depending on its concentration in solution. The process has been further verified by using sodium decyl sulfate (SDeS), which has smaller hydrophobic chain length than SDS as also varies in the critical micellar concentration (CMC) and aggregation number. The binding constant of the probe to the surfactant aggregates varies depending on the extent of surface available to the fluorophore for attachment.

Taste masking and molecular properties of metformin hydrochloride-indion 234 complexes

Metformin hydrochloride is an oral antidiabetic biguinide agent, used in the management of non-insulin-dependent (type-2) diabetes mellitus. The purpose of present work was to formulate tasteless complexes of metformin hydrochloride with indion 234 and to evaluate molecular properties of drug complexes. The drug loading onto ion-exchange resin was optimized for mixing time, activation, effect of pH, mode of mixing, ratio of drug to resin, and temperature. Drug resin complexes (DRC) were evaluated for taste masking and characterized by x-ray diffraction study and infrared spectroscopy. Metformin hydrochloride release from DRC is obtained at salivary and gastric pH and in the presence of electrolytes. The efficient drug loading was evident in batch process using activated indion 234 with a pH of 3.5 and drug-resin ratio of 1:1.2, while temperature enhances the complexation process. Infrared spectroscopy revealed complexation of –NH (drug) with indion 234. DRC are amorphous in nature. Drug release from DRC in salivary pH was insufficient to impart bitter taste. Volunteers rated the complex as tasteless and agreeable. Complete drug release was observed at gastric pH in 3 h. The drug release was accelerated in the presence of electrolytes. Indion 234 is inexpensive, and the simple technique is effective for bitterness masking of metformin.

Formulation and evaluation of primaquine phosphate taste-masked rapidly disintegrating tablet

This work investigates the complete bitter-taste-masking of primaquine phosphate (PRM) using a solid dispersion with mono ammonium glycyrrhyzinate pentahydrate (GLY). This work also describes the preparation of rapidly disintegrating tablets (RDTs) of PRM by a direct compression method using superdisintegrant, croscarmellose sodium. A solid dispersion was prepared by the solvent evaporation method. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. In-vitro drug release studies were performed for RDTs at both pH 1.2 and 6.8. Bitterness score was evaluated using a human gustatory sensation test. FTIR spectroscopy and DSC showed no interaction of PRM in GLY solid dispersion. RDTs prepared from solid dispersion showed complete bitter-taste-masking of PRM. RDTs containing solid dispersion exhibited a better dissolution profile, at both pH 1.2 and 6.8, than pure PRM. Thus, the solid dispersion technique can be successfully used for complete bitter taste masking of PRM.

Preparation, characterization and taste-masking properties of microspheres containing azithromycin

Objectives

The aim of this study was to prepare a microsphere formulation in order to mask the bitter taste of azithromycin.

Methods

Microspheres of azithromycin with ethyl cellulose were prepared by the modified solvent diffusion method. The microspheres were mixed with other excipients to form orally dry suspensions and the sensory test for taste masking was evaluated.

Key findings

Results demonstrated that the suspension could significantly mask the bitter taste of azithromycin and the relative bioavailability of suspensions to reference preparations was 102.7%.

Conclusions

The results indicate that the microsphere formulation can be a promising drug carrier for masking the bitter taste of azithromycin.

Influence of chitosan crosslinking on bitterness of mefloquine hydrochloride microparticles using central composite design

The present work examines the influence of various process and product parameters on mefloquine hydrochloride (MFL) entrapped in crosslinked chitosan microparticles for masking the bitterness. A central composite design (CCD) was employed to investigate the effect of three process and product variables, namely amount of MFL, chitosan and sodium hydroxide (crosslinking agent) on the incorporation efficiency, particle size, drug release at pH 6.8 and bitterness score. The microparticles were prepared by ionotropic gelation method, with a hardening time of 60 min. The optimum condition for process and product variables was evaluated using desirability function. The model is further cross validated for bias. The optimized microparticles were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Bitterness score was evaluated by human gustatory sensation test. Multiple linear regression analysis revealed that the crosslinking of chitosan significantly affects incorporation efficiency, particle size, drug release and bitterness score. The bitterness score was decreased to zero compared to 3+ of pure MFL. It can be inferred that the proposed methodology can be used to prepare MFL microparticles for bitter taste masking.

Formulation and evaluation of taste masked oral reconstitutable suspension of primaquine phosphate

The purpose of this research was to mask the intensely bitter taste of primaquine phosphate (PRM) and to formulate suspension powder (cachets) of the taste masked drug. Taste masking was done using beta-cyclodextrin. To characterize and formulate taste masked cachets of PRM, the 1:25 M physical mixture was selected based on bitterness score. Phase solubility studies, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray powder diffraction (XRPD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Cachets were evaluated for angle of repose, sedimentation characterization and pH. In vitro drug release studies for physical mixture and kneaded system were performed at pH, 1.2 and 6.8. Bitterness score was evaluated using gustatory sensation test. Phase solubility studies showed weak interaction between PRM and CD. The FTIR, DSC and XRPD studies indicated inclusion complexation in physical mixture and kneaded system. In addition, kneaded system and physical mixture exhibited better drug release at pH 1.2 and negligible effect at pH 6.8. Cachets prepared using physical mixture, (DS24), showed complete bitter taste masking and easy redispersibility. Taste evaluation of cachets in human volunteers rated tasteless with a score of 0 to DS24 and 3 to DS25. Thus, results conclusively demonstrated successful taste masking and formulation of cachets with taste masked drug.

A novel riboflavin gastro-mucoadhesive delivery system based on ion-exchange fiber

A novel gastro-mucoadhesive delivery system based on ion-exchange fiber has been developed. Riboflavin-5'-phosphate sodium salt (RF5P), which is site-specifically absorbed from the upper gastrointestinal tract, was used as model drug. A modified dissolution system, which can also be called 'flow through diffusion cell' (FTDC), was used to study the drug release from the drug fibers. Gastrointestinal transit studies of the RF5P fiber complexes in rats and gamma imaging study in volunteer was carried out to evaluate the gastro-retentive behavior of the fiber. The pharmacokinetic profile and parameters of riboflavin via analysis of urinary excretion of riboflavin on man were measured. Study on rat and man provide evidence for the validity of the hypothesis that the drug fiber provided good mucoadhesive properties in vivo and should therefore be of considerable interest for the development of future mucoadhesive oral drug delivery dosage forms.

Effect of chitosan crosslinking on bitterness of artemether using response surface methodology

This work examines the influence of various process parameters on artemether entrapped in crosslinked chitosan microparticles for masking bitterness. A central composite design was used to optimize the experimental conditions for bitterness masking. Critical parameters such as the amounts of artemether, chitosan and crosslinking agent have been studied to evaluate how they affect responses such as incorporation efficiency, particle size and drug release at pH 6.8. The desirability function approach has been used to find the best compromise between the experimental results. The optimized microparticles were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Bitterness score was evaluated by human gustatory sensation test. Multiple linear regression analysis revealed that the crosslinking of chitosan significantly affects incorporation efficiency, particle size and drug release at pH 6.8. The bitterness score of microparticles was decreased to 0, compared with 3+ for pure artemether. The proposed method completed masked the bitter taste of artemether.

Mechanistic evaluation of factors affecting compound loading into ion-exchange fibers

Donnan theory was applied to gain mechanistic understanding on the factors affecting drug loading process, compound-fiber affinity and subsequent release from fibrous ion-exchangers. Impact of initial loading solution concentration on fiber occupancy and loading efficiency of compounds were assessed experimentally and theoretically. Relative affinity towards the anion-exchange fibers was studied by dual loading of monovalent salicylic acid and either more lipophilic 3-isopropylsalicylic acid or divalent 5-hydroxyisophthalic acid. The effect of fiber framework on compound binding was evaluated separately for weakly and strongly basic fibers of similar ion-exchange capacities. The results revealed that loading into the ion-exchange fibers can be efficiently adjusted by the concentration of loading solution, leading to improved controllability of drug release from the fiber and minimised drug loss during the loading procedure. Ion-exchange fibers can be utilised successfully in simultaneous delivery of two ionic drugs, which offers a potential drug delivery system for synergistically active drugs. However, physicochemical characteristics of the drug (lipophilicity, valence) and framework of fibrous ion-exchanger affect the relative affinity of the drug towards the fiber, and should not be neglected when selecting appropriate ion-exchange fiber or optimising the external conditions during loading/release. Application of Donnan theory in modelling calculations supported precisely the experimental observations of compound loading (fiber occupancy and loading efficiency).

The Effect of Valence on the Ion-Exchange Process: Theoretical and Experimental Aspects on Compound Binding/Release

The effect of valence of mobile counter-ions (extracting electrolytes), mobile co-ions, and drug-like compounds was evaluated on drug binding/release in ion-exchange fibers. The experimental results support the Donnan theory and suggest that incorporation of monovalent salicylic acid (SA) and divalent 5-hydroxyisophthalic acid (di-COOH) into the anion-exchange fibers was attained mainly as a result of electrostatic (ionic) interaction, with additional contribution of non-electrostatic interactions. Increasing the capacity of ion-exchanger increased the molar amount of compound loading. More efficient release of model anions was observed at increasing valence or concentration of the extracting counter-ion. Potency to release the compounds decreased in the order of citrate (-3) > sulfate (-2) > chloride (-1). The valence of co-ions (sodium (+1) vs. calcium (+2)) in the external solution had only a slight effect on the release. Due to dual site binding (two ionized carboxylate groups), the amount of di-COOH bound into the fibers was half of that of monovalent SA. Also the release was significantly reduced, as the electrostatic interaction was stronger in the case of divalent compound. Simulations on the effect of valence on the Donnan potential and theoretical modeling of the release efficiencies by the external ions supported successfully the conclusions above.

Preparation of roxithromycin-polymeric microspheres by the emulsion solvent diffusion method for taste masking

Microspheres of roxithromycin with Eudragit S100 and silica were prepared by the emulsion solvent diffusion method to mask the bitter taste of the antibiotic. The effect of different polymers and drug-polymer ratios on the taste masking and the characteristics of the microspheres were investigated. It was found that Eudragit S100 was the best for masking the unpleasant taste of roxithromycin among the six kinds of polymers investigated. The results of DSC, X-ray diffraction and IR showed that there were several combinations of roxithromycin and Eudragit S100. The influence of other formulation factors, i.e. dichloromethane-acetone ratios and silica-polymer ratios on the properties of the microspheres were also examined. In conclusion, the results of the present study will be helpful for the preparation of oral forms of roxithromycin with an acceptable taste.

Equilibrium Distribution of Permeants in Polyelectrolyte Microcapsules Filled with Negatively Charged Polyelectrolyte: The Influence of Ionic Strength and Solvent Polarity

The effects of ionic strength and solvent polarity on the equilibrium distribution of fluorescein (FL) and FITC-dextran between the interior of polyelectrolyte multilayer microcapsules filled with negatively charged strong polyelectrolyte and the bulk solution were systematically investigated. A negatively charged strong polyelectrolyte, poly(styrene sulfonate) (PSS), used for CaCO3 core fabrication, was entrapped inside the capsules. Due to the semipermeability of the capsule wall, a Donnan equilibrium between the inner solution within the capsules and the bulk solution was created. The equilibrium distribution of the negatively charged permeants was investigated by means of confocal laser scanning microscopy as a function of ionic strength and solvent polarity. The equilibrium distribution of the negatively charged permeants could be tuned by increasing the bulk ionic strength to decrease the Donnan potential. Decreasing the solvent polarity also could enhance the permeation of FL, which induces a sudden increase of permeation when the ethanol volume fraction was higher than 0.7. This is mainly attributed to the precipitation of PSS. A theoretical model combining the Donnan equilibrium and Manning counterion condensation was employed to discuss the results.

Preparation of ion-exchange fiber fabrics by electrospray deposition

Ion-exchange fiber (IEF) fabrics were prepared by electrospray deposition (ESD) and post-deposition chemical modification of their surfaces. Nonwoven fibrous fabrics were obtained from the solutions of synthetic polymers-polystyrene (PS) and poly(4-vinylpyridine) (P4VP)-of various concentrations. The diameter of the fiber in the fabrics ranged from 600 nm to 1.70 microm. Cation- and anion-exchange fiber (CEF and AEF) fabrics were obtained from the sulfonation of PS fabrics and the quaternization of P4VP fabrics, respectively. These fabrics were thoroughly characterized by a series of techniques, such as scanning electron microscopy (SEM), permporometry, nitrogen adsorption measurements, and potentiometric titrations. The SEM images showed that the fabrics had a porous structure after their chemical modification. The mean pore size, porosity, and specific surface area of the flow-through pores were 1.67-3.53 microm, about 80%, and 13 m(2)/g, respectively. The ion-exchange capacity was in the range from 0.78 to 1.34 mmol/g. The AEF fabric, on the other hand, showed a high specific surface area, i.e., the Brunauer-Emmett-Teller (BET) surface area of 600 m(2)/g, due to the formation of much smaller pores on the surface of the fiber structure in the fabric. The secondary chemical modification of the nano-microfiber fabrics by ESD provides novel functional materials with a large adsorption capacity and a high catalytic activity.

Environmentally benign hardness removal using ion-exchange fibers and snowmelt

Many industrial unit operations and unit processes require near-complete removal of hardness to avoid scaling in heat-transfer equipment, fouling in membranes, and high consumption of detergents and sequestering chemicals in cooling and wash water. Lime softening and cation exchange are the most commonly used processes practiced to date for hardness removal. Herein, we report and discuss the results and attributes of a new hardness removal process using ion-exchange fibers (IX-fibers). Most importantly, the process uses harvested snowmelt (or rainwater) as the regenerant chemical along with sparged carbon dioxide. Consequently, the spent regenerant does not contain a high concentration of aggressive chemicals such as sodium chloride or acid like traditional ion-exchange processes nor does the process produce voluminous sludges similar to lime softening. The bulk of carbon dioxide consumed during regeneration remains sequestered in the aqueous phase as alkalinity. IX-fibers form the heart of the process. They are essentially thin cylindrical polymeric strands 10-20 microm in diameter. The weak-acid carboxylate functional groups reside near to the surface of these cylindrical fibers. Low intraparticle diffusional resistance is the underlying reason IX-fibers are amenable to efficient regeneration with snowmelt sparged with carbon dioxide. When the carbon dioxide partial pressure is increased to 6.8 atm, over 90% calcium desorption efficiency is obtained. On the contrary, commercial weak-acid ion-exchange resins in spherical bead forms are ineffective for regeneration with carbon-dioxide-sparged snowmelt due to extremely slow ion-exchange kinetics involving counter-transport of Ca2+ and H+.

Effect of ion-exchange fiber structure on the binding and release of model salicylates

Salicylates were used as model anions to evaluate the effect of the structure (framework and ion-exchange groups) of fibrous anion-exchangers on the extent and mechanism(s) of compound binding and release. Binding was affected by the physicochemical properties of both the salicylates and the ion-exchange fibers. The highest molar amount of binding was obtained with the most lipophilic salicylate (5-chlorosalicylic acid) and the weak base (vinylpyridine) anion-exchange fibers. However, when the ion-exchange capacity was taken into account, higher binding was obtained in fibers of poly(ethylene) framework compared to the viscose-based fibers. The extent of salicylate release into NaCl solution(s) was dependent on the physicochemical characteristics of both the fiber and the bound model salicylate as well as on the amount of extracting ions. With strong base fibers (trimethylammonium), the viscose framework released the salicylates more efficiently than the poly(ethylene) framework. In the case of weak base fibers, the poly(ethylene) framework released the salicylates to a higher extent than the viscose framework. Calculated equilibrium constants (K) of the ion-exchange reactions illustrated that in addition to electrostatic interactions (pure ion-exchange mechanism), non-electrostatic interactions (hydrophobic interactions and/or hydrogen bonding) were also involved. However, the release of the salicylates was efficiently modified by the amount of extracting electrolyte, demonstrating that ion-exchange was the prevalent release mechanism.

Transdermal iontophoresis: combination strategies to improve transdermal iontophoretic drug delivery

For several decades, there has been interest in using the skin as a port of entry into the body for the systemic delivery of therapeutic agents. However, the upper layer of the skin, the stratum corneum, poses a barrier to the entry of many therapeutic entities. Given a compound, passive delivery rate is often dependent on two major physicochemical properties: the partition coefficient and solubility. The use of chemical enhancers and modifications of the thermodynamic activity of the applied drug are two frequently employed strategies to improve transdermal permeation. Chemical enhancers are known to enhance drug permeation by several mechanisms which include disrupting the organized intercellular lipid structure of the stratum corneum , 'fluidizing' the stratum corneum lipids , altering cellular proteins, and in some cases, extracting intercellular lipids . However, the resulting increase in drug permeation using these techniques is rather modest especially for hydrophilic drugs. A number of other physical approaches such as iontophoresis, sonophoresis, ultrasound and the use of microneedles are now being studied to improve permeation of hydrophilic as well as lipophilic drugs. This article presents an overview of the use of iontophoresis alone and in conjunction with other approaches such as chemical enhancement, electroporation, sonophoresis, and use of microneedles and ion-exchange materials.

Molecular properties of ciprofloxacin-Indion 234 complexes

The purpose of this research was to formulate tasteless complexes of ciprofloxacin with Indion 234 and to evaluate molecular properties of drug complexes. The effect of batch and column process, complexation time, temperature, and pH on ciprofloxacin loading on Indion 234 is reported. Drug resin complexes (DRC) were characterized by infrared spectroscopy, thermal analysis, and x-ray diffraction pattern. Ciprofloxacin release from DRC is obtained at salivary and gastric pH and in the presence of electrolytes. The efficient drug loading was evident in batch process using activated Indion 234 with a drug-resin ratio of 1:1.3. Drug complexation enhanced with pH from 1.2 to 6, while temperature did not affect the complexation process. Infrared spectroscopy revealed complexation of -NH (drug) with Indion 234. DRC are amorphous in nature. Drug release from DRC in salivary pH was insufficient to impart bitter taste. Volunteers rated the complex as tasteless and agreeable. Complete drug release was observed at gastric pH in 2 hours. The drug release was accelerated in the presence of electrolytes. Indion 234 is inexpensive, and the simple technique is effective for bitterness masking of ciprofloxacin.

Drug release properties of polyethylene-glycol-treated ciprofloxacin-Indion 234 complexes

The polyethylene glycol (PEG) treatment of ciprofloxacin-Indion 234 complex was aimed to retard rapid ion exchange drug release at gastric pH. Ciprofloxacin loading on Indion 234 was performed in a batch process, and the amount of K(+) in Indion 234 displaced by drug with time was studied as equilibrium constant K(DM). Drug-resin complex (DRC) was treated with aqueous PEG solution (0.5%-2% wt/vol) of different molecular weights (MWs) for 2 to 30 minutes. The PEG-treated ciprofloxacin-Indion 234 complex was evaluated for particle size, water absorption time, and drug release at gastric pH. During drug loading on Indion 234, the equilibrium constant (K(DM)) increased rapidly up to 20 minutes with efficient drug loading. Increased time of immersion of the drug resinate in PEG solutions significantly retained higher size particles upon dehydration. The larger DRC particles showed longer water absorption times owing to compromised hydrating power. The untreated DRC showed insignificant drug release in deionized water; while at gastric pH, ciprofloxacin release was complete in 90 minutes. A trend of increased residual particle size, proportionate increase in water absorption time, and hence the retardation of release with time of immersion was evident in PEG-treated DRC. The time of immersion of DRC in PEG solution had predominant release retardant effect, while the effect of molecular weight of PEG was insignificant. Thus, PEG treatment of DRC successfully retards ciprofloxacin ion exchange release in acidic pH.

Rate and extent of ion-exchange process: the effect of physico-chemical characteristics of salicylate anions

Ten salicylate anions were used as model compounds in order to investigate systematically the impact of compound lipophilicity, valence, aqueous solubility and hydrogen bonding on binding into and release from a strong anion-exchange fiber, Smopex DS-218v. The release of salicylates from the fiber was studied at 1/10, 1/1 or 10/1 molar ratios of the external chloride-ions versus the salicylate bound in the fiber. The Donnan potential between the fiber and external solution (electrostatic interaction) appeared to be the main factor affecting the release of salicylates from the strong base anion-exchange fiber--an increase in the molar amount of the external chloride-ions resulted in a more effective release of all the salicylates from the fiber. The highest chloride-ion concentration (10/1) released the monovalent salicylates practically completely, while the lowest concentration (1/10) released only 10-35% of the loaded salicylates. The nature and strength of salicylate binding to the fiber by non-electrostatic interactions affected also the ion-exchange process, especially in dilute Cl- solutions. Hydrophobic interactions decreased the rate and amount of drug release from the fiber with the most lipophilic salicylates. Hydrogen bonding between the fiber and the compound restricted also the rate and extent of ion-exchange process of the hydrophilic 5-aminosalicylic acid and 5-hydroxysalicylic acid. The amount of divalent 5-carboxylsalicylic acid bound into and released from the fiber was clearly smaller as compared to the monovalent salicylates potentially due to cross-linking of the fiber chains.

Ion-exchange fibers and drugs: a transient study

The objective of this study was to theoretically model and experimentally measure the kinetics and extent of drug release from different ion-exchange materials using an in-house-designed flow-cell. Ion-exchange fibers (staple fibers and fiber cloth) were compared with commercially available ion-exchange materials (resins and gels). The functional ion-exchange groups in all the materials were weak -COOH or strong -SO3H groups. The rate and extent of drug release from the fibers (staple fiber>fiber cloth) was much higher than that from the resin or the gel. An increase in the hydrophilicity of the model drugs resulted in markedly higher rates of drug release from the fibers (nadolol>metoprolol>propranolol>tacrine). Theoretical modelling of the kinetics of ion exchange provided satisfactory explanations for the experimental observations: firstly, a change in the equilibrium constant of the ion-exchange reaction depending on the drug and the ion-exchange material and, secondly, a decrease in the Peclet number (Pe) with decreasing flow-rate of the drug-releasing salt solution.

Synthetic nanopores with fixed charges: an electrodiffusion model for ionic transport

Synthetic nanopores with fixed charges exhibit ionic equilibrium and transport properties that resemble those displayed by biological ion channels. We present an electrodiffusion model based on the Nernst-Planck flux equations, which allows for a qualitative description of the steady state ionic transport through a nanopore when the membrane fixed charges and all mobile carriers (including the water ions) are properly taken into account. In particular, we study the current-voltage curve, the electrical conductance, the reversal potential (a measure of the nanopore ionic selectivity), as well as the flux inhibition by protons and divalent cations in the nanopore. The model clearly shows how the changes in the ionization state of the fixed charges with pH and salt concentration dictate the electrical properties of the nanopore. The agreement between the model predictions and previous experimental data allows us to identify which are the main characteristics that permit a simple description of this complex system.

Donnan Equilibrium of Ionic Drugs in pH-Dependent Fixed Charge Membranes: Theoretical Modeling

We have studied theoretically the partition equilibrium of a cationic drug between an electrolyte solution and a membrane with pH-dependent fixed charges using an extended Donnan formalism. The aqueous solution within the fixed charge membrane is assumed to be in equilibrium with an external aqueous solution containing six ionic species: the cationic drug (DH(+)), the salt cations (Na(+) and Ca(2+)), the salt anion (Cl(-)), and the hydrogen and hydroxide ions. In addition to these mobile species, the membrane solution may also contain four fixed species attached to the membrane chains: strongly acid sulfonic groups (SO(3)(-)), weakly acid carboxylic groups in dissociated (COO(-)) and neutral (COOH) forms, and positively charged groups (COO...Ca(+)) resulting from Ca(2+) binding to dissociated weakly acid groups. The ionization state of the weak electrolyte groups attached to the membrane chains is analyzed as a function of the local pH, salt concentration, and drug concentration in the membrane solution, and particular attention is paid to the effects of the Ca(2+) binding to the negatively charged membrane fixed groups. The lipophilicity of the drug is simulated by the chemical partition coefficient between the membrane and external solutions giving the tendency of the drug to enter the membrane solution due to hydrophobic interactions. Comparison of the theoretical results with available experimental data allows us to explain qualitatively the effects that the pH, salt concentration, drug concentration, membrane fixed charge concentration, and Ca(2+) binding exert on the ionic drug equilibrium. The role of the interfacial (Donnan) electric potential difference between the membrane and the external solutions on this ionic drug equilibrium is emphasized throughout the paper.