Plasmid delivery to muscle: Recent advances in polymer delivery systems

Biodistribution and Safety Studies of a Bicistronic Plasmid for Nerve Repair

Gene therapy is one of the promising approaches for regenerative medicine. Local and long-term expression of essential growth factors allows to achieve the desired therapeutic effect. However, some aspects of prolonged usage of genetic constructs encoding growth factors, such as toxicity, mutagenicity, genotoxicity, and ability to disseminate from the injection site and mediate ectopic expression of therapeutic proteins, are poorly investigated. These aspects of gene therapy drugs' usage became the subject of this study. To study plasmid biodistribution, toxicity, mutagenicity, and genotoxicity, we used previously described bicistronic genetic construct encoding human brain-derived neurotrophic factor (hBDNF) and human urokinase plasminogen activator (huPA) for nerve repair. Biodistribution studies were conducted in mice: a course of intramuscular plasmid injections was followed by the study of the content of the plasmid (real-time polymerase chain reaction) and recombinant proteins (enzyme-linked immunosorbent assay) in murine organs and tissues. The study of the plasmid chronic toxicity was carried out on rats with registration of their weight dynamics, neurological status, emotional state, and blood test parameters. The mutagenicity of the plasmid was studied in an in vivo DNA comet test in mice. Plasmid genotoxicity was investigated in the model of somatic recombination in Drosophila females. We have shown that plasmids can disseminate from the injection site, but do not mediate ectopic expression of growth factors upon repeated intramuscular injections. The studied plasmid also does not reveal toxic, mutagenic, or genotoxic effects. During the toxicological study on rats, we have shown that daily injections of this genetic construct, despite its ability to disseminate from the injection site, do not affect the physical, cognitive, and emotional state of experimental animals. We have demonstrated the safety of the bicistronic plasmid, encoding hBDNF and huPA, upon its repeated administration. The properties of genetic constructs strongly depend on their sequence and delivery approach, which requires conducting of their safety studies in each specific case. Impact statement Gene therapy is one of the promising approaches for regenerative medicine. Local and long-term expression of essential growth factors allows to achieve the desired therapeutic effect. However, some aspects of prolonged usage of genetic constructs encoding growth factors, such as toxicity, mutagenicity, genotoxicity, and ability to disseminate from the injection site and mediate ectopic expression of therapeutic proteins, are poorly investigated. These aspects of gene therapy became the subject of this study. To our knowledge, this is a unique study that provides a thorough safety investigation of a bicistronic plasmid after its readministration.

Influence of Poly(Amino Acid) Composition on the Complexation of Plasmid DNA and Transfection Efficiency

Random copolymers of poly[(Lys, Ala) 1: 1], poly[(Lys, Ala) 2: 1], poly[(Lys, Ala) 3: 1], poly[(Lys, Ser) 3: 1] and poly[(Arg, Ser) 3: 1] (ratios designate the feed comonomer composition), were complexed with plasmid DNA pRL CMV luc at different weight per weight DNA: polymer ratios. The physicochemical properties of the complexes were evaluated by gel retardation assay, Zeta potential measurements and photon correlation spectroscopy. The extent of DNA protection against nucleases was determined by a nuclease assay. Cell viability and transfection efficiency of the DNA/polymer complexes were determined by MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-4-sulfophenyl)-2-H -tetrazolium) and luciferase assays, respectively. Regardless of the amino acid feed composition, neutral complexes were formed between 2: 1 and 1: 1 DNA: polymer ratios. The particle sizes of the complexes were in the range of 100-300 nm with complexes with more DNA gave a larger particle size than those with a higher proportion of polymer. Compared to other copolymers, lower amounts of poly[(Lys, Ser) 3: 1] were required to protect the DNA against degradation. The presence of arginine residues increased the transfection efficiency of the complexes by 2-3 orders of magnitude. Results suggest that the amino acid composition of the copolymers has an impact on protection of DNA against degradation by the nucleases, cytotoxicity and transfection efficiency.

A novel gene delivery composite system based on biodegradable folate-poly (ester amine) polymer and thermosensitive hydrogel for sustained gene release

Local anti-oncogene delivery providing high local concentration of gene, increasing antitumor effect and decreasing systemic side effects is currently attracting interest in cancer therapy. In this paper, a novel local sustained anti-oncogene delivery system, PECE thermoresponsive hydrogel containing folate-poly (ester amine) (FA-PEA) polymer/DNA (tumor suppressor) complexes, is demonstrated. First, a tumor-targeted biodegradable folate-poly (ester amine) (FA-PEA) polymer based on low-molecular-weight polyethyleneimine (PEI) was synthesized and characterized, and the application for targeted gene delivery was investigated. The polymer had slight cytotoxicity and high transfection efficiency in vitro compared with PEI 25k, which indicated that FA-PEA was a potential vector for targeted gene delivery. Meanwhile, we successfully prepared a thermoresponsive PECE hydrogel composite containing FA-PEA/DNA complexes which could contain the genes and slowly release the genes into cells. We concluded the folate-poly (ester amine) (FA-PEA) polymer would be useful for targeted gene delivery, and the novel gene delivery composite based on biodegradable folate-poly (ester amine) polymer and thermosensitive PECE hydrogel showed potential for sustained gene release.

Controlled release of plasmid DNA from biodegradable scaffolds fabricated using a thermally-induced phase-separation method

Highly porous poly(D,L-lactic-co-glycolic acid) (PLGA) scaffolds were fabricated by a thermally-induced phase-separation (TIPS) method to deliver plasmid DNA in a controlled manner. A variety of TIPS parameters directly affecting pore structures and their interconnectivities of the scaffold, such as polymer concentration, solvent/non-solvent ratio, quenching methods and annealing time, were systematically examined to explore their effects on sustained release behaviors of plasmid DNA. Plasmid DNA was directly loaded into the inner pore region of the scaffold during the TIPS process. By optimizing the parameters, PLGA scaffolds releasing plasmid DNA over 21 days were successfully fabricated. DNA release profiles were mainly affected by the pore structures and their interconnectivities of the scaffolds. Plasmid DNA released from the scaffolds fully maintained its structural integrity and showed comparable transfection efficiency to native plasmid DNA. These biodegradable polymeric scaffolds capable of sustained DNA release can be potentially applied for various tissue engineering purposes requiring a combined gene delivery strategy.

Evidence of DNA transfer across a model membrane by a neutral amphiphilic block copolymer

BACKGROUND

Neutral amphiphilic triblock copolymers have been shown to be efficient for gene transfection in vivo, especially by direct injection into the muscle. To contribute to a better understanding of the underlying mechanisms, in the present study, we investigated the properties of a poly(ethylene oxide-b-4-vinylpyridine) diblock copolymer as vector for nucleic acid transfer, with the particular aim of shedding some light on a possible mechanism explaining the internalization of DNA by the transfected cells.

METHODS

Complexation of plasmid DNA with the PEO-b-P4VP diblock copolymer was investigated by ethidium bromide exclusion and gel electrophoresis assays. Interaction of the copolymer with a lipid model membrane was evaluated by electrophysiological assays and quantification of plasmid DNA was performed by quantitative polymerase chain reaction. In vivo luciferase transfection assays were finally performed.

RESULTS

The diblock copolymer was found to poorly interact with DNA up to a mass ratio (copolymer/DNA) as high as 150. At a concentration of 36 µg/ml, it induced the formation of mainly transient (but sometimes permanent) pores and the formation of those pores allowed the translocation of plasmid DNA across the model membrane. However, only low transgene expression was obtained; the luciferase levels observed with the diblock being of the same order of magnitude as those observed with the corresponding PEO and P4VP homopolymers.

CONCLUSIONS

These results strongly suggest that gene transfection by neutral block copolymers may involve the formation of cellular pores; in addition, they also highlight that in vivo gene transfection requires the use of adequately soluble block copolymers.

The effect of conjugation to gold nanoparticles on the ability of low molecular weight chitosan to transfer DNA vaccine

Nonviral gene delivery systems based on conventional high molecular weight chitosans are efficient as DNA vaccine delivery system, but have poor physical properties such as aggregated shapes, low solubility at neutral pH, high viscosity at concentrations used for in vivo delivery and a slow onset of action. Furthermore, Chitosan oligomers shorter than 14 monomers units were recently found to form only weak complexes with DNA, resulting in physically unstable polyplexes in vitro and in vivo. Here, low molecular weight chitosans with an average molecular mass of 6kDa (Chito6) have been covalently attached to gold nanoparticles (GNPs), and the potency of the resulting Chito6-GNPs conjugates as vectors for the delivery of plasmid DNA has been investigated in vitro and in vivo. After delivery by intramuscular immunization in BALB/c mice, the Chito6-GNPs conjugates induced an enhanced serum antibody response 10 times more potent than naked DNA vaccine. Additionally, in contrast to naked DNA, the Chito6-GNPs conjugates induced potent cytotoxic T lymphocyte responses at a low dose.

Controlled synthesis and association behavior of graft Pluronic in aqueous solutions

Poly(vinyl pyrrolidone) (PVP) was grafted onto Pluronic F127 (PEO-PPO-PEO) to produce novel amphiphilic PVP-g-F127 graft copolymers. A controlled synthesis method was used to graft PVP onto different parts of F127. Two types of graft polymers were obtained: one has PVP grafted onto the PEO part of F127 and the other has PVP grafted onto the PPO part of F127. The association behavior of the two modified polymers was examined using differential scanning calorimetry, surface tension measurements, and dynamic light scattering.

Vinyl Polymers as Non-Viral Gene Delivery Carriers: Current Status and Prospects

Since the first application of polymers as non-viral gene delivery systems in 1965 by Vaheri and Pagano using functionalised dextran (A. Vaheri and J. S. Pagano, "Infectious poliovirus RNA: a sensitive method of assay", Virology 1965, 27, 434-6), a large number of different polymers have been developed, studied and compared for application as DNA carriers. Vinyl-based polymers are one type of polymers that have gained considerable interest. The interest in developing this particular type of polymer is partly related to the straightforward way in which large amounts of these polymers can be prepared by radical (co)polymerisation. This opens up a path for establishing a wide range of structure-property relations using polymer libraries. The present review aims to give an overview of past and ongoing research using vinyl-based gene delivery systems. The application of cationic, neutral and zwitterionic polymers as DNA carriers is summarised and discussed. [structure: see text] Chemical structure of DEAE-functionalised dextran.

Poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-g-poly(vinyl pyrrolidone): synthesis and characterization

Pluronic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers are grafted with poly(vinyl pyrrolidone) by free radical polymerization of vinyl pyrrolidone with simultaneous chain transfer to the Pluronic in dioxane. This modified polymer has both thermal responsiveness and remarkable capacity to interact with a wide variety of hydrophilic and hydrophobic pharmaceutical agents which is very attractive for medical applications. The chemical structure of the graft copolymers was characterized by FTIR and 1H NMR spectroscopy. Polymerization conditions such as initiators, feed ratio, and reaction times are studied to obtain the ideal graft copolymer.

Microspheres for Drug Delivery

With advances in biotechnology, genomics, and combinatorial chemistry, a wide variety of new, more potent and specific therapeutics are being created. Because of common problems such as low solubility, high potency, and/or poor stability of many of these new drugs, the means of drug delivery can impact efficacy and potential for commercialization as much as the nature of the drug itself. Thus, there is a corresponding need for safer and more effective methods and devices for drug delivery. Indeed, drug delivery systems—designed to provide a therapeutic agent in the needed amount, at the right time, to the proper location in the body, in a manner that optimizes efficacy, increases compliance and minimizes side effects—were responsible for $47 billion in sales in 2002, and the drug delivery market is expected to grow to $67 billion by 2006.

Efficient expression of transgenes in adult zebrafish by electroporation

Background

Expression of transgenes in muscle by injection of naked DNA is widely practiced. Application of electrical pulses at the site of injection was demonstrated to improve transgene expression in muscle tissue. Zebrafish is a precious model to investigate developmental biology in vertebrates. In this study we investigated the effect of electroporation on expression of transgenes in 3–6 month old adult zebrafish.

Results

Electroporation parameters such as number of pulses, voltage and amount of plasmid DNA were optimized and it was found that 6 pulses of 40 V·cm^-1 at 15 μg of plasmid DNA per fish increased the luciferase expression 10-fold compared to controls. Similar enhancement in transgene expression was also observed in Indian carp (Labeo rohita). To establish the utility of adult zebrafish as a system for transient transfections, the strength of the promoters was compared in A2 cells and adult zebrafish after electroporation. The relative strengths of the promoters were found to be similar in cell lines and in adult zebrafish. GFP fluorescence in tissues after electroporation was also studied by fluorescence microscopy.

Conclusion

Electroporation after DNA injection enhances gene expression 10-fold in adult zebrafish. Electroporation parameters for optimum transfection of adult zebrafish with tweezer type electrode were presented. Enhanced reporter gene expression upon electroporation allowed comparison of strengths of the promoters in vivo in zebrafish.

Low molecular weight dextrans stabilize nonviral vectors during lyophilization at low osmolalities: concentrating suspensions by rehydration to reduced volumes

Stabilization of nonviral vectors during freezing and drying requires formulation with protective excipients such that transfection rates and physical characteristics are maintained upon reconstitution. While many studies have demonstrated the ability of disaccharides (e.g., sucrose) to effectively protect nonviral vectors during lyophilization, the sucrose/DNA weight ratios required to achieve stability result in formulations that are not osmotically compatible with the subcutaneous (SC) or intramuscular (IM) injection of a typical dose of plasmid DNA. In an effort to reduce the formulation osmolality, dextrans possessing a range of molecular weights were investigated for their ability to serve as protectants. Dextran 3000 proved to be the most effective of the dextrans tested, and offered similar protection to sucrose on a weight basis. However, the advantage of employing this excipient is that the resulting osmolality is reduced by approximately 40% as compared to an equivalent weight of sucrose. Moreover, the use of dextran allows lyophilized vector preparations to be rehydrated to reduced volumes, essentially concentrating vectors prior to administration. Utilizing a combination of dextran 3000 and sucrose, we demonstrate that complexes of polyethylenimine (PEI) and DNA lyophilized at 0.1 mg/mL can be concentrated tenfold upon rehydration, resulting in an isotonic formulation containing 1 mg/mL DNA that can provide more realistic injection volumes for animal studies, and is compatible with clinical trials involving SC and IM injection.

Controlled release of plasmid DNA from photo-cross-linked pluronic hydrogels

Chemically cross-linked hydrogels composed of Pluronic, water-soluble tri-block copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), were synthesized by a photo-polymerization method to achieve controlled DNA release. Pluronic F127 was di-acrylated to form a macromer and cross-linked to form a hydrogel structure in the presence and absence of vinyl group-modified hyaluronic acid (HA). UV irradiation time and the presence of the vinyl group-modified HA affected the mechanical property of Pluronic hydrogels to a great extent. Swelling ratio, degradation, and rheological behaviors of Pluronic hydrogels were investigated. When plasmid DNA was loaded in the hydrogels for sustained delivery, various release profiles were attained by varying UV irradiation time and modified HA amounts. Entrapped DNA was gradually damaged with increasing the UV exposure time as evidenced by decreasing the transfection efficiency. The DNA fractions released from the HA/Pluronic hydrogels, however, exhibited considerable transfection efficiencies commensurate with the UV exposure time, suggesting that they were not chemically degraded during the release period and substantially maintained functional gene expression activities despite the UV irradiation.

Inducible production of erythropoietin using intramuscular injection of block copolymer/DNA formulation

BACKGROUND

We have previously shown that intramuscular injection of plasmid DNA formulated with a non-ionic amphiphile synthetic vector [poly(ethylene oxide)(13)-poly(propylene oxide)(30)-poly(ethylene oxide)(13) block copolymer; PE6400] increases reporter gene expression compared with naked DNA. We have now investigated this simple non-viral formulation for production of secreted proteins from the mouse skeletal muscle.

METHODS

Plasmids encoding either constitutive human secreted alkaline phosphatase or murine erythropoietin inducible via a Tet-on system were formulated with PE6400 and intramuscularly injected into the mouse tibial anterior muscle.

RESULTS

PE6400/DNA formulation led to an increased amount of recombinant alkaline phosphatase secreted from skeletal muscle as compared with naked DNA. In the presence of doxycycline, a single injection of 10 microg plasmid encoding inducible murine erythropoietin formulated with PE6400 significantly increased the hematocrit, whereas the same amount of DNA in the absence of PE6400 had no effect. The increase in the hematocrit was stable for 42 days. The tetracycline-inducible promoter permitted pharmacological control of hematocrit level after DNA intramuscular injection. However, 4 months post-injection the hematocrit returned to its pre-injection value, even in the presence of doxycycline. This phenomenon was likely caused by an immune response against the tetracycline-activated transcription factor.

CONCLUSIONS

Intramuscular injection of plasmid DNA formulated with PE6400 provides an efficient and simple method for secretion and production of non-muscle proteins.

Microspheres for controlled release drug delivery

Controlled release drug delivery employs drug-encapsulating devices from which therapeutic agents may be released at controlled rates for long periods of time, ranging from days to months. Such systems offer numerous advantages over traditional methods of drug delivery, including tailoring of drug release rates, protection of fragile drugs and increased patient comfort and compliance. Polymeric microspheres are ideal vehicles for many controlled delivery applications due to their ability to encapsulate a variety of drugs, biocompatibility, high bioavailability and sustained drug release characteristics. Research discussed in this review is focused on improving large-scale manufacturing, maintaining drug stability and enhancing control of drug release rates. This paper describes methods of microparticle fabrication and the major factors controlling the release rates of encapsulated drugs. Furthermore, recent advances in the use of polymer microsphere-based systems for delivery of single-shot vaccines, plasmid DNA and therapeutic proteins are discussed, as well as some future directions of microsphere research.

Emerging drugs for sarcopenia: age-related muscle wasting

Sarcopenia is the term widely used to describe the progressive loss of muscle mass with advancing age. Even before significant muscle wasting becomes apparent, ageing is associated with a slowing of movement and a gradual decline in muscle strength, factors that increase the risk of injury from sudden falls and the reliance of the frail elderly on assistance in accomplishing even basic tasks of independent living. Sarcopenia is recognised as one of the major public health problems now facing industrialised nations, and its effects are expected to place increasing demands on public healthcare systems worldwide. Although the effects of ageing on skeletal muscle are unlikely to be halted or reversed, the underlying mechanisms responsible for these deleterious changes present numerous targets for drug discovery with potential opportunities to attenuate muscle wasting, improve muscle function, and preserve functional independence. Very few drugs have been developed with sarcopenia specifically in mind. However, because many of the effects of ageing on skeletal muscle resemble those indicated in many neuromuscular disorders, drugs that target neurodegenerative diseases may also have important relevance for treating age-related muscle wasting and weakness. This review describes a selection of the emerging drugs that have been developed during the period 1997 - 2004, relevant to sarcopenia.

Pluronic Block Copolymers for Gene Delivery

Amphiphilic block copolymers of poly(ethylene oxide) and poly(propylene oxide) called Pluronic or poloxamer are commercially available pharmaceutical excipients. They recently attracted considerable attention in gene delivery applications. First, they were shown to increase the transfection with adenovirus and lentivirus vectors. Second, they were shown to increase expression of genes delivered into cells using non-viral vectors. Third, the conjugates of Pluronic with polycations, were used as DNA-condensing agents to form polyplexes. Finally, it was demonstrated that they can increase regional expression of the naked DNA after its injection in the skeletal and cardiac muscles or tumor. Therefore, there is substantial evidence that Pluronic block copolymers can improve gene expression with different delivery routes and different types of vectors, including naked DNA. These results and possible mechanisms of Pluronic effects are discussed. At least in some cases, Pluronic can act as biological adjuvants by activating selected signaling pathways, such as NF-kappaB, and upregulating the transcription of the genes.

Plasmid vaccines and therapeutics: from design to applications

In the late 1980s, Vical and collaborators discovered that the injection into tissues of unformulated plasmid encoding various proteins resulted in the uptake of the plasmid by cells and expression of the encoded proteins. After this discovery, a period of technological improvements in plasmid delivery and expression and in pharmaceutical and manufacturing development was quickly followed by a plethora of human clinical trials testing the ability of injected plasmid to provide therapeutic benefits. In this chapter, we summarize in detail the technologies used in the most recent company-sponsored clinical trials and discuss the potential for future improvements in plasmid design, manufacturing, delivery, formulation and administration. A generic path for the clinical development of plasmid-based products is outlined and then exemplified using a case study on the development of a plasmid vaccine from concept to clinical trial.

Water-Soluble and Nonionic Polyphosphoester: Synthesis, Degradation, Biocompatibility and Enhancement of Gene Expression in Mouse Muscle

A nonionic and water-soluble polyphosphoester, poly(2-hydroxyethyl propylene phosphate) (PPE3), was synthesized by chlorination of poly(4-methyl-2-oxo-2-hydro-1,3,2-dioxaphospholane), followed by esterification with 2-benzyloxyethanol and deprotection of the hydroxyl group by catalytic hydrogenation in the presence of Pd-C. PPE3 degraded rapidly in PBS 7.4 at 37 degrees C. The cytotoxicity and tissue compatibility assays suggested good biocompatibility of PPE3 in vitro and in vivo. The expression of pVR1255 Luc plasmid in mouse muscle after intramuscular (i.m.) injection of DNA formulated with PPE3 solution in saline was enhanced up to 4-fold compared with that of naked DNA. These results suggest the potential of this polyphosphoester for naked DNA-based gene therapy. The advantages of this polymer design include the biodegradability of the polyphosphoester and its structural versatility, which allows the fine-tuning of the physicochemical properties to optimize the enhancement of gene expression in muscle.

Effect of side-chain structures on gene transfer efficiency of biodegradable cationic polyphosphoesters

Cationic polyphosphoesters (PPEs) with different side-chain charge groups were designed and synthesized as biodegradable gene carriers. Poly(N-methyl-2-aminoethyl propylene phosphate) (PPE-MEA), with a secondary amino group (-CH(2)CH(2)NHCH3) side chain released DNA in several hours at N/P (amino group of polymer to phosphate group of DNA) ratios from 0.5 to 5; whereas PPE-HA, bearing -CH(2)(CH2)(4)CH(2)NH(2) groups in the side chain, did not release DNA at the same ratio range for 30 days. Hydrolytic degradation and DNA binding results suggested that side chain cleavage, besides the polymer degradation, was the predominant factor affected the DNA release and transfection efficiencies. The side chain of PPE-MEA was cleaved faster than that of PPE-HA, resulting poor cellular uptake and no transgene expression for PPE-MEA/DNA complexes in COS-7 cells at charge ratios from 4 to 12. In contrast, PPE-HA/DNA complexes were stable enough to be internalized by cells and effected gene transfection (3400 folds higher than background at a charge ratio of 12). Interestingly, gene expression levels mediated by PPE-MEA and PPE-HA in mouse muscle following intramuscular injection of complexes showed a reversed order: PPE-MEA/DNA complexes mediated a 1.5-2-fold higher luciferase expression in mouse muscle as compared with naked DNA injection, while PPE-HA/DNA complexes induced delayed and lowered luciferase expression than naked DNA. These results suggested that the side chain structure is a crucial factor determining the mechanism and kinetics of hydrolytic degradation of PPE carriers, which in turn influenced the kinetics of DNA release from PPE/DNA complexes and their transfection abilities in vitro and in vivo.

Optimization of DNA vaccination immune responses in dairy cows: effect of injection site and the targeting efficacy of antigen-bCTLA-4 complex

The objectives of this study were to evaluate the effects of immunization site and antigen presenting cell targeting on cattle immune responses to DNA immunization. Cows were vaccinated with the plasmid expression vector pCI alone, pCI encoding the bacterial antigen beta-galactosidase (pCI-beta-gal) or pCI encoding bCTLA 4 fused to beta-gal (pCI-bCTLA-hIgG-beta-gal). The plasmids were delivered by intramuscular, intradermal, intramammary gland, or intra supramammary lymph node needle-injection. Both vaccines induced significant humoral and cellular immune responses. pCI-beta-gal elicited a higher IgG response than immunization with pCI-bCTLA-hIgG-beta-gal. Cows injected intramuscularly and intramammary had higher IgG and IgG-1 humoral responses than cows immunized intradermaly or in the lymph nodes. The injection site did not significantly affect the magnitude of the IgG2 and IgM antibody responses, although a trend similar to the IgG results was observed. The lymphocyte proliferation index was higher with pCI-beta-gal but was not affected by the injection site. These results suggest that in bovine, the injection site can affect immune responses but they do not provide evidence that bCTLA-4-hIgG-antigen targeting is effective in cattle.

Microbubble ultrasound improves the efficiency of gene transduction in skeletal muscle in vivo with reduced tissue damage

Intramuscular injection of naked plasmid DNA is a safe approach to the systemic delivery of therapeutic gene products, but with limited efficiency. We have investigated the use of microbubble ultrasound to augment naked plasmid DNA delivery by direct injection into mouse skeletal muscle in vivo, in both young (4 weeks) and older (6 months) mice. We observed that the albumin-coated microbubble, Optison (licensed for echocardiography in patients), significantly improves the transfection efficiency even in the absence of ultrasound. The increase in transgene expression is age related as Optison improves transgene expression less efficiently in older mice than in younger mice. More importantly, Optison markedly reduces muscle damage associated with naked plasmid DNA and the presence of cationic polymer PEI 25000. Ultrasound at moderate power (3 W/cm2 1 MHz, 60 s exposure, duty cycle 20%), combined with Optison, increases transfection efficiency in older, but not in young, mice. The safe clinical use of microbubbles and therapeutic ultrasound and, particularly, the protective effect of the microbubbles against tissue damage provide a highly promising approach for gene delivery in muscle in vivo.

Barriers to nonviral gene delivery

The use of various synthetic lipids and polymers to deliver DNA for gene therapy applications has been the subject of intense examination for the last 15 years. Our understanding of the processes involved in the delivery of DNA, although still limited, can be described in terms of specific physical and chemical barriers encountered along the delivery pathway. Successful engagement of this pathway involves avoiding inactivation in the extracellular compartment and initial favorable interactions with the cell surface. Internalization of the delivery system by endocytosis results in a poorly defined endosomal trafficking process which, if not escaped, leads to degradation of the therapeutic DNA in lysosomes. For the small fraction of material that is able to escape this vesicular trafficking pathway, the cytosol provides additional physical and metabolic barriers to further trafficking to the nucleus. Finally, nuclear uptake has been demonstrated to be a significant barrier to gene delivery. In this review, we outline in greater detail the various processes involved in each step and describe various formulation variables that have been explored to overcome these delivery barriers to nonviral gene delivery.

Pluronic block copolymers as novel polymer therapeutics for drug and gene delivery

Pluronic block copolymers are found to be an efficient drug delivery system with multiple effects. The incorporation of drugs into the core of the micelles formed by Pluronic results in increased solubility, metabolic stability and circulation time for the drug. The interactions of the Pluronic unimers with multidrug-resistant cancer cells result in sensitization of these cells with respect to various anticancer agents. Furthermore, the single molecular chains of copolymer, unimers, inhibit drug efflux transporters in both the blood-brain barrier and in the small intestine, which provides for the enhanced transport of select drugs to the brain and increases oral bioavailability. These and other applications of Pluronic block copolymers in various drug delivery and gene delivery systems are considered.

Somatic gene transfer into the lactating ovine mammary gland

BACKGROUND

Somatic gene therapy requires safe and efficient techniques for the gene transfer procedure. The ovine mammary gland is described as a model system for the evaluation of somatic gene transfer methods.

METHODS

Different gene delivery formulations were retrogradely injected into the mammary gland of lactating sheep. The efficiency of the gene transfer was subsequently measured by the detection of the secreted transgene products in the milk. To counteract the milk flow in the lactating gland caused by the permanent milk production, a newly developed pretreatment of the mammary gland with hyperosmotic solutions was applied. In addition, in vivo electroporation of DNA into the mammary gland is described.

RESULTS

Gene transfer using naked DNA or simple complexes of DNA with polycations did not result in traceable amounts of reporter gene products. However, utilizing the complex cationic lipid DOSPER, a peak expression of about 400 ng/ml was observed 6 days after transfection. Maximum expression rates of more than 1 microg/ml were obtained by combining hyperosmotic pretreatment and receptor-mediated gene transfer. For the in vivo electroporation, the proof of principle for this technique in the mammary gland is reported.

CONCLUSIONS

The ovine mammary gland turned out to be a very well suited as a model system for evaluation and optimization of various gene transfer protocols.

Pluronic block copolymers: novel functional molecules for gene therapy

Pluronic block copolymers are recognized pharmaceutical excipients listed in the US and British Pharmacopoeia. They have been used extensively in a variety of pharmaceutical formulations including delivery of low molecular mass drugs and polypeptides. This review describes novel applications of Pluronic block copolymers in gene therapy. In particular, these molecules can modify the biological response during gene therapy in the skeletal muscle, resulting in an enhancement of the transgene expression as well as an enhancement of the therapeutic effect of the transgene. Furthermore, Pluronic block copolymers are versatile molecules that can be used as structural elements of the polycation-based gene delivery systems (polyplexes). Based on these studies, the use of block copolymers in gene delivery is a promising area of research, in which new and important developments are expected.

Block copolymeric biotransport carriers as versatile vehicles for drug delivery

This review describes block copolymer-based systems that are used in drug formulation development. The use of amphiphilic block copolymers to modify pharmacological performance of various classes of drugs attracts more and more attention. This is largely attributable to the high tendency of block copolymer-based drug formulations to self-assemble, as well as flexibility of block copolymer chemistry, which allows precise tailoring of the carrier to virtually any chemical entity. Combination of these features allows adjustment of block copolymer-based drug formulations to achieve the most beneficial balance in drug biological interactions with the systems that control its circulation in and removal from the body and its therapeutic activity. The following major aspects are considered: 1) physical properties of formulations and the methods used to adjust these properties towards the highest pharmacological performance of the product; 2) combinatorial methods for optimisation of block copolymer-based formulations; 3) biological response modifying properties of block copolymer-based formulations.

Reversible vacuolation of T-tubules in skeletal muscle: mechanisms and implications for cell biology

The majority of investigations of the transverse tubules (T-system) of skeletal muscle have been devoted to their role in excitation-contraction coupling, with particular reference to contact with the sarcoplasmic reticulum and the mechanism of Ca2- release. By contrast, this review is concerned with structural and functional aspects of the vacuolation of T-tubules. It covers experimental procedures used in reversible vacuolation induced by the efflux-influx of glycerol and other small nonelectrolytes, sugars, and ions. The characteristics of the phenomenon, associated alterations in muscle function, and the swelling of analogous structures in nonmuscle cells are considered. Possible functions of reversible vacuolation in water balance, transport, membrane repair, muscle pathology, and fatigue are considered, and the potential application of reversible vacuolation in the transfection of skeletal muscle is discussed. In relation to the possible mechanisms involved in reversible vacuolation, particular attention is given to the dynamic and structural aspects of the opening and closing of T-tubules, the origin of vacuolar membranes, and the localized character of tubular swelling.

Delivering DNA with polymer matrices: applications in tissue engineering and gene therapy

DNA delivery from polymers is currently being applied to the multidisciplinary science of gene therapy and tissue engineering. This is motivated by the potential of treating a wide range of diseases and the provision of alternatives to tissue and organ transplantation. The combination of these fields involves the incorporation of genes into polymeric matrices that can be injected or implanted to promote tissue regeneration. This review presents an overview of current and developing polymer systems for gene delivery and tissue engineering.

Development of biomaterials for gene therapy

Novel biocompatible polymeric gene carriers have been examined for their potential in treating various genetic and acquired diseases. The use of polymeric gene carriers may overcome the current problems associated with viral vectors in safety, immunogenicity, and mutagenesis. However, effective polymer-based gene therapy requires the control of cellular access and uptake, intracellular trafficking, and nuclear retention of plasmid DNA. Inefficient endosomal release, cytoplasmic transport, and nuclear entry of plasmids are currently limiting factors in the use of polymers for effective plasmid-based gene therapy. Therefore, several different polymeric gene carriers have been designed recently in an attempt to overcome these problems. This review explores the conceptual and experimental aspects of polymer-based gene delivery and presents an overview on the recent use of polymers to enhance the effectiveness of plasmid-based systems. Despite their current limitations, polymeric carriers have significant potential as commercially viable gene medicines.

Synthesis and characterisation of polyamine-poly(ethylene glycol) constructs for DNA binding and gene delivery

Improved non-viral vector systems are needed for efficient delivery of DNA to target cell nuclei in gene therapy. A series of linear polyamine poly(ethylene glycol) (PEG) constructs has been synthesised by reaction of appropriately Boc-protected thermine derivatives with omega-methoxyPEG oxiranylmethyl ethers. Constructs carrying 1-3 MeOPEG units and 0, 2 or 4 N-methyl groups have been prepared by this method. H2N(CH2)3NBoc(CH2)3NBoc(CH2)3NHBoc was prepared efficiently by mono-trifluoroacetylation of thermine, attachment of Boc and removal of the trifluoroacetyl group in one pot. A similar process gave H2N(CH2)3NBoc(CH2)3NBoc(CH2)3NH2. BocMeN(CH2)3NHMe was alkylated by 1,3-dibromopropane to give BocMeN(CH2)3NMe(CH2)3NMe(CH2)3NMeBoc. A cyanoethylation/reduction sequence extended H2N(CH2)3NBoc(CH2)3NBoc(CH2)3NH2 to give H2N(CH2)3NBoc(CH2)3NBoc(CH2)3NBoc(CH2)3NBoc(CH2) 3NH2, which was converted to its mono- and di-MeOPEG550 derivatives. Deprotection gave the linear polyamine MeOPEG constructs. A branched triamine-poly(ethylene glycol) construct was prepared by acylation of (BocHN(CH2)3)2N(CH2)3NH2 with omega-methoxyPEG 550 chloroformate, followed by deprotection. A cyanoethylation/reduction/protection sequence from (H2N(CH2)3)2 N(CH2)3NHBoc gave a protected pentamine. Alkylation with Br(CH2)5CONH(CH2)2NHBoc, deprotection, acylation with MeOPEG chloroformate and deprotection gave a pentamine MeOPEG construct in which the MeOPEG is attached through a linker to the central amine. The linear hexamine construct carrying MeOPEG550 at only one terminus was the most effective DNA-interactive member of the two series in an ethidium displacement assay and was effective in delivering a reporter gene to RIF-1 tumours.

Microencapsulation of DNA using poly(DL-lactide-co-glycolide): stability issues and release characteristics

The design of DNA vaccination delivery systems for the targeting of professional antigen presenting cells could be an interesting approach to elicit cytotoxic T-cell responses to fight viral infections and in cancer therapy. Stability studies with linear high and low molecular DNA and supercoiled plasmid DNA were performed in order to check their ability to withstand stress conditions applied during formulation processes. DNA was tested for integrity by the PicoGreen assay and transfectivity was assessed in cell culture transfection experiments. Double-stranded DNA is extremely stable under physiological conditions in vitro but is rapidly degraded under acidic conditions and high shear forces. Thereby, different stress factors resulted in distinct degradation patterns such as fragmentation and strand separation possibly followed by further decomposition of single-stranded DNA. DNA containing PLGA microparticles as a potential delivery system was prepared by spray-drying. Encapsulation efficiency, DNA stability and burst release varied significantly depending on the different parameters explored in this study. The microencapsulation process was altered to achieve maximal stability of encapsulated DNA by reducing exposure to shear forces and by the addition of NaHCO(3) which acts as a buffering agent and furthermore stabilizes dsDNA against mechanical degradation. Stability of DNA is maintained during the burst release phase, but massive degradation occurred during the second release phase possibly due to acidic catalyzed decomposition. In summary, we feel that microencapsulation of DNA vaccines by spray-drying offers manifold possibilities to design suitable delivery systems in terms of optimizing phagocytosis by APCs and maintaining stability of DNA in phagosomes.