Imidazo[1,2-c]quinazolines with lipid peroxidation inhibitory effect

Starch mediates and cements densely magnetite-coating of talc, giving an efficient nano-catalyst for three-component synthesis of imidazo[1,2-c]quinazolines

Hot-water-soluble starch (HWSS) was used as a powerful cementing material to produce nano-size conglomerates of talc and magnetite nanoparticles. Coordination of HWSS hydroxyl groups to iron atoms at surface of magnetite leads to grafting and encapsulation of its nanoparticles. The resulting nano-complex showed a higher loading capacity on talc than pristine magnetite nanoparticles. Only a minute amount of HWSS was detected in the fabricated nano-composite Talc\HWSS@Fe3O4. XPS study suggests a considerable interaction between HWSS and Fe3O4 nanoparticles, upon which some of the Fe+3 atoms on surface of Fe3O4 are reduced into Fe+2 atoms. ATR FT-IR spectra of the nano-composite revealed significant delamination of talc sheets on interaction with HWSS-coated Fe3O4 nanoparticles. The nano-composite displayed an efficient catalytic activity in the synthesis of new imidazo[1,2-c]quinazoline derivatives via Grobke-Blackburn-Bienaymé three-component reaction of 4-aminoquinazoline, arylaldehydes and isocyanide. The efficiency of the method was exemplified by synthesizing 7 new products in fairly high yields (68-83%) within short reaction times (24-30 min) using a catalytic amount of the catalyst under solvent-free condition at 120 °C. Clean and fast synthesis of the products and convenient separation of the robust nano-catalyst are the prominent advantages of the present method. The nano-catalyst was properly characterized.

Imidazo[1,2-c]quinazolines as a novel and potent scaffold of α-glucosidase inhibitors: design, synthesis, biological evaluations, and in silico studies

α-Glucosidase inhibition is an approved treatment for type 2 diabetes mellitus (T2DM). In an attempt to develop novel anti-α-glucosidase agents, two series of substituted imidazo[1,2-c]quinazolines, namely 6a-c and 11a-o, were synthesized using a simple, straightforward synthetic routes. These compounds were thoroughly characterized by IR, 1H and 13C NMR spectroscopy, as well as mass spectrometry and elemental analysis. Subsequently, the inhibitory activities of these compounds were evaluated against Saccharomyces cerevisiae α-glucosidase. In present study, acarbose was utilized as a positive control. These imidazoquinazolines exhibited excellent to great inhibitory potencies with IC50 values ranging from 12.44 ± 0.38 μM to 308.33 ± 0.06 μM, which were several times more potent than standard drug with IC50 value of 750.0 ± 1.5 μM. Representatively, compound 11j showed remarkable anti-α-glucosidase potency with IC50 = 12.44 ± 0.38 μM, which was 60.3 times more potent than positive control acarbose. To explore the potential inhibition mechanism, further evaluations including kinetic analysis, circular dichroism, fluorescence spectroscopy, and thermodynamic profile were carried out for the most potent compound 11j. Moreover, molecular docking studies and in silico ADME prediction for all imidazoquinazolines 6a-c and 11a-o were performed to reveal their important binding interactions, as well as their physicochemical and drug-likeness properties, respectively.

Recyclable Magnetic Cu-MOF-74-Catalyzed C(sp2)-N Coupling and Cyclization under Microwave Irradiation: Synthesis of Imidazo[1,2-c]quinazolines and Their Analogues

Magnetic Cu-MOF-74 (Fe₃O₄@SiO₂@Cu-MOF-74) was synthesized for the first time by grafting MOF-74 (copper as the metal center) on the surface of core-shell magnetic carboxyl-functionalized silica gel (Fe₃O₄@SiO₂-COOH), which was prepared by coating core Fe₃O₄ nanoparticles with hydrolyzed 2-(3-(triethoxysilyl)propyl)succinic anhydride and tetraethyl orthosilicate. The structure of Fe₃O₄@SiO₂@Cu-MOF-74 nanoparticles was characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM). The prepared Fe₃O₄@SiO₂@Cu-MOF-74 nanoparticles could be applied as a recyclable catalyst to the synthesis of N-fused hybrid scaffolds. 2-(2-Bromoaryl)imidazoles and 2-(2-bromovinyl)imidazoles were coupled and cyclized with cyanamide in DMF in the presence of a catalytic amount of Fe₃O₄@SiO₂@Cu-MOF-74 along with a base to give imidazo[1,2-c]quinazolines and imidazo[1,2-c]pyrimidines, respectively, in good yields. The Fe₃O₄@SiO₂@Cu-MOF-74 catalyst could be easily recovered by a super magnetic bar and recycled more than four times while almost maintaining catalytic activity.

Microwave-assisted green construction of imidazole-fused hybrid scaffolds using 2-aminobenzimidazoles as building blocks

A class of trinuclear imidazole-fused hybrid scaffolds was constructed by the reaction of 2-(2-bromoaryl)- and 2-(2-bromovinyl)imidazoles with 2-aminobenzimidazoles as building blocks in the presence of a base under microwave irradiation. A nucleophilic aromatic substitution followed by cyclization is proposed as a reaction pathway of this green process.

A green synthesis of trinuclear imidazole-fused hybrid scaffolds has been developed by transition metal-free double C(sp²)–N coupling and cyclization of 2-(2-bromoaryl)- and 2-(2-bromovinyl)imidazoles with 2-aminobenzimidazoles as building blocks under microwave irradiation.

Esters with imidazo [1,5-c] quinazoline-3,5-dione ring spectral characterization and quantum-mechanical modeling

1-phenyl-2H,6H-imidazo[1,5-c]quinazoline-3,5-dione reacts with ethyl bromoacetate under mild conditions to give 2-(ethoxycarbonylmethyl)-1-phenyl-6H-imidazo[1,5-c]quinazoline-3,5-dione (MEPIQ) and next 2,6-bis(ethoxycarbonylmethyl)-1-phenylimidazo[1,5-c]quinazoline-3,5-dione (BEPIQ). The products were isolated at high yield and identified on the basis of IR, ¹H- and ¹³C-NMR, UV spectroscopy, and X-ray crystallography. Diester (BEPIQ) can be presented by 16 possible pair of enantiomers. Only one pair of them is the most stable and crystallizes which is shown crystallographic research. Based on quantum-mechanical modeling, with the use of DFT method, which conformers of mono- and diester and why they were formed was explained. It was calculated that 99.93% of the monoester (MEPIQ) is formed at position No. 2 and one pair of the monoester conformers, from six possible, has the largest share (51.63%). These results afforded to limit the number of diester conformers to eight. Unfortunately, the quantum-mechanical calculations performed that their shares are similar. Further quantum-mechanical modeling showed that conformers are able to undergo mutual transformations. As a result only one pair of diester conformers forms crystals. These conformers have substituents in trans position and these substituents are located parallel to imidazoquinazoline ring. This allows for the denser packing of the molecules in the unit cell.

The Conversion of 4-Anilinoquinazoline- and 3-Aryl-4-imino-3,4-dihydro-quinazoline-2-carbonitriles into Benzo[4,5]imidazo[1,2-c]quinazoline-6-carbonitriles via Oxidative and Nonoxidative C-N Couplings

Benzo[4,5]imidazo[1,2-c]quinazoline-6-carbonitriles are prepared in high yields via three new routes: (1) a Cu(OTf)2 (0-5 mol %) catalyzed hypervalent iodine [PhI(OTf)2] mediated oxidative coupling of 4-anilinoquinazoline-2-carbonitriles in neat trifluoroacetic acid (TFA); (2) a Pd(OAc)2 (10 mol %) or CuI (10 mol %) mediated nonoxidative coupling of 4-(2-bromoanilino)quinazoline-2-carbonitrile; and (3) a nonoxidative Pd(Ar3P)3 [Ar = 3,5-(F3C)2C6H3] [aka Superstable Pd(0) Catalyst] (10 mol %) mediated intramolecular C-N cyclization of 3-(2-bromophenyl)-4-imino-3,4-dihydroquinazoline-2-carbonitriles. All new compounds are fully characterized.