Carbohydrate composition of wheat, wheat bran, sorghum and bajra with good chapati/roti (Indian flat bread) making quality

Elicitation of nutritional, antioxidant, and antidiabetic potential of barnyard millet (Echinochloa esculenta (A. Braun) H. Scholz) sprouts and microgreens through in vitro bio-accessibility assessment

This study has redirected focus towards the untapped potential of millets, exploring their utilization as small-scale vegetables like sprouts and microgreens. This study assessed the metabolite profiles and therapeutic efficacy of barnyard millets as sprouts and microgreens for antioxidant, anti-diabetic, and bioaccessibility properties. Based on the study, sprouts contained 456.52 mg GE/g of starch and microgreens contained 470.04 mg GE/g of carbohydrates, whereas the gastric phase of microgreens showed 426.85 mg BSAE/g, 397.6 mg LE/g, 348.19 g RE/g, and 307.40 g AAE/g of proteins, amino acids, vitamin A and vitamin C respectively. Secondary metabolites were significantly concentrated in the microgreen stage which is responsible for their increased antioxidant and antidiabetic potential than sprouts. This study validated the therapeutic and nutritional value of millet sprouts and microgreens by demonstrating their significant nutritional composition.

Combined Strategy Using High Hydrostatic Pressure, Temperature and Enzymatic Hydrolysis for Development of Fibre-Rich Ingredients from Oat and Wheat By-Products

Wheat bran (WB) and oat hull (OH) are two interesting undervalued cereal processing sources rich in total dietary fibre (TDF) and other associated bioactive compounds, such as β-glucans and polyphenols. The aim of this study was to optimise a combination chemical (enzymes) and physical (high hydrostatic pressure-temperature) strategies to increase the bioaccessibility of bioactive compounds naturally bound to the bran and hull outer layers. WB and OH were hydrolysed using food-grade enzymes (UltraFloXL and Viscoferm, for WB and OH, respectively) in combination with HPP at different temperatures (40, 50, 60 and 70 °C) and hydrolysis either before or after HPP. Proximal composition, phytic acid, β-glucans, total phenolics (TPs) and total antioxidant activity (TAC) were evaluated to select the processing conditions for optimal nutritional and bioactive properties of the final ingredients. The application of the hydrolysis step after the HPP treatment resulted in lower phytic acid levels in both matrices (WB and OH). On the other hand, the release of β-glucan was more effective at the highest temperature (70 °C) used during pressurisation. After the treatment, the TP content ranged from 756.47 to 1395.27 µmol GAE 100 g-1 in WB, and OH showed values from 566.91 to 930.45 µmol GAE 100 g-1. An interaction effect between the temperature and hydrolysis timing (applied before or after HPP) was observed in the case of OH. Hydrolysis applied before HPP was more efficient in releasing OH TPs at lower HPP temperatures (40-50 °C); meanwhile, at higher HPP temperatures (60-70 °C), hydrolysis yielded higher TP values when applied after HPP. This effect was not observed in WB, where the hydrolysis was more effective before HPP. The TP results were significantly correlated with the TAC values. The results showed that the application of optimal process conditions (hydrolysis before HPP at 60 or 70 °C for WB; hydrolysis after HPP at 70 °C for OH) can increase the biological value of the final ingredients obtained.

The rise of the sourdough: Genome-scale metabolic modeling-based approach to design sourdough starter communities with tailored-made properties

Sourdough starters harbor microbial consortia that benefit the final product's aroma and volume. The complex nature of these spontaneously developed communities raises challenges in predicting the fermentation phenotypes. Herein, we demonstrated for the first time in this field the potential of genome-scale metabolic modeling (GEMs) in the study of sourdough microbial communities. Broad in-silico modeling of microbial growth was applied on communities composed of yeast (Saccharomyces cerevisiae) and different Lactic Acid Bacteria (LAB) species, which mainly predominate in sourdough starters. Simulations of model-represented communities associated specific bacterial compositions with sourdough phenotypes. Based on ranking the phenotypic performances of different combinations, Pediococcus spp. - Lb. sakei group members were predicted to have an optimal effect considering the increase in S. cerevisiae growth abilities and overall CO2 secretion rates. Flux Balance Analysis (FBA) revealed mutual relationships between the Pediococcus spp. - Lb. sakei group members and S. cerevisiae through bidirectional nutrient dependencies, and further underlined that these bacteria compete with the yeast over nutrients to a lesser extent than the rest LAB species. Volatile compounds (VOCs) production was further modeled, identifying species-specific and community-related VOCs production profiles. The in-silico models' predictions were validated by experimentally building synthetic sourdough communities and assessing the fermentation phenotypes. The Pediococcus spp. - Lb. sakei group was indeed associated with increased yeast cell counts and fermentation rates, demonstrating a 25 % increase in the average leavening rates during the first 10 fermentation hours compared to communities with a lower representation of these group members. Overall, these results provide a possible novel strategy towards the de-novo design of sourdough starter communities with tailored-made characterizations, including a shortened leavening period.

Preparation and research of PCL/cellulose composites: Cellulose derived from agricultural wastes

For the rational use of agricultural wastes, bagasse, orange peel and wheat bran were used to fabricate bio-based polymer materials. Cellulose was extracted from the three different agricultural wastes, and poly(ε-caprolactone) (PCL) was used as the matrix material. PCL was mixed with nanocrystalline cellulose (CNC), extracted bagasse cellulose (GC), orange peel cellulose (JC) and wheat bran cellulose (MC) by solution casting. Morphology and structure of the extracted cellulose were studied by Scanning Electron Microscope, Fourier Infrared spectrometer, thermogravimetry and X-ray diffractometer. The influence of GC, JC, MC on the crystallization process and mechanical properties of PCL was investigated by DSC and tensile test. Experimental results show that the addition of CNC, GC, JC, MC increases the crystallization temperature of PCL, accelerates the crystallization process of PCL, and improves the tensile property of PCL.

Improvement in nutritional quality of traditional unleavened flat bread using Quality Protein Maize

Maize grains are consumed majorly in the form of unleavened flat bread (chapatti) in the South East Asian region. The landraces are better accepted for their chapatti-making attributes such as grain color and good organoleptic properties. However, these cultivars are low in essential amino acids, particularly lysine and tryptophan content. Hence, an investigation was performed to identify maize genotypes with high nutritional value coupled with good chapatti-making qualities. Seven genotypes, comprising two Quality Protein Maize (QPM) hybrids, two normal maize hybrids, and three normal white maize landraces were assessed for their physical characteristics, proximate composition, and chapatti-making quality. Landrace 593 showed the highest protein and ash content. Flours obtained from different genotypes were significantly different (p ≤ 0.001) in terms of protein content, color value, textural, as well as mineral content. PMH 10 and IQMH 203 exhibited the highest and lowest hydration index, respectively. Two QPM hybrids showed significantly higher lysine and tryptophan content as compared to other genotypes. QPM hybrids were identified as the promising material with improved nutritional quality with respect to chapatti making. In combination with mustard greens, maize chapatti constitutes an important traditional delicacy in north India. The enhanced nutritional quality of QPM chapattis is an added advantage. We show the differentiation of chapattis made from QPM and normal maize using a rapid protocol developed previously. This is expected to enable the development and quality control of commercial enterprises based on high protein quality QPM.

Microbial Community, Co-Occurrence Network Relationship and Fermentation Lignocellulose Characteristics of Broussonetia papyrifera Ensiled with Wheat Bran

Broussonetia papyrifera has a high lignocellulose content leading to poor palatability and low digestion rate of ruminants. Thus, dynamic profiles of fermentation lignocellulose characteristics, microbial community structure, potential function, and interspecific relationships of B. papyrifera mixing with wheat bran in different ratios: 100:0 (BP100), 90:10 (BP90), 80:20 (BP80), and 65:35 (BP65) were investigated on ensiling days 5, 15, 30, and 50. The results showed that adding bran increased the degradation rate of hemicellulose, neutral detergent fiber, and the activities of filter paper cellulase, endoglucanase, acid protease, and neutral protease, especially in the ratio of 65:35. Lactobacillus, Pediococcus, and Weissella genus bacteria were the dominant genera in silage fermentation, and Pediococcus and Weissella genus bacteria regulated the process of silage fermentation. Compared with monospecific B. papyrifera silage, adding bran significantly increased the abundance of Weissella sp., and improved bacterial fermentation potential in BP65 (p < 0.05). Distance-based redundancy analysis showed that lactic acid bacteria (LAB) were significantly positive correlated with most lignocellulose content and degrading enzymes activities, while Monascus sp. and Syncephalastrum sp. were opposite (p < 0.05). Co-occurrence network analysis indicated that there were significant differences in microbial networks among different mixing ratios of B. papyrifera silage prepared with bran. There was a more complex, highly diverse and less competitive co-occurrence network in BP65, which was helpful to silage fermentation. In conclusion, B. papyrifera ensiled with bran improved the microbial community structure and the interspecific relationship and reduced the content of lignocellulose.

Sorghum Flour Application in Bread: Technological Challenges and Opportunities

Sorghum has a long history of use in the production of different types of bread. This review paper discusses different types of bread and factors that affect the physicochemical, technological, rheological, sensorial, and nutritional properties of different types of sorghum bread. The main types of bread are unleavened (roti and tortilla), flatbread with a pre-ferment (injera and kisra), gluten-free and sorghum bread with wheat. The quality of sorghum flour, dough, and bread can be improved by the addition of different ingredients and using novel and traditional methods. Furthermore, extrusion, high-pressure treatment, heat treatment, and ozonation, in combination with techniques such as fermentation, have been reported for increasing sorghum functionality.

Optimization of concurrent production of xylanolytic and pectinolytic enzymes by Bacillus safensis M35 and Bacillus altitudinis J208 using agro-industrial biomass through Response Surface Methodology

Application of crude xylanolytic and pectinolytic enzymes in diverse industrial processes make these enzymes commercially valuable and demand their production process to be cost-effective. Out of four different agrowaste biomass, wheat bran (WB) and citrus peel (CP), when amended as fermentation substrates, respectively induced the highest xylanolytic enzymes and pectinolytic enzymes from both, B. safensis M35 and B. altitudinis J208. Further, the simultaneous amendment of WB and CP yielded concurrent production of these cellulase free xylanolytic and pectinolytic enzymes. Hence, the quadratic model was developed using the Central Composite Design of Response Surface Method (CCD-RSM). The model gave the concentration values for WB and CP substrates to be amended in one single production medium for obtaining two optimized predicted response values of xylanase activity and pectinase activity units, which were further practically validated for the xylanase and pectinase production responses from the optimized production medium (OPM). These practically obtained response values from OPM were found to be in accordance with a range of 95% predicted intervals (PI) values. These observations verified the validity of the predicted quadratic model from RSM and suggested that both xylanase and pectinase enzymes can be induced concurrently from both of the bacterial strains.

Pearl millet minerals: effect of processing on bioaccessibility

Pearl millet is an important source of dietary energy, and provides nutritional security for people in the third world countries, particularly in Africa and Asia. Previous studies have shown that pearl millet is an excellent source of micronutrients like iron and zinc. Owing to the presence of inhibitors like phytic acid, polyphenols, and fibres, the bioaccessibility of iron and zinc is very low in pearl millet diet. The present review is an attempt to highlight the localisation of minerals, phytic acid, and polyphenols in pearl millet grains, and various strategies that are being employed for the reduction of inhibitory factors. This review also appraises and gives an overview of the application of combinations of processing conditions and enhancers, that increases the bioaccessibility of iron and zinc either by way of reduction of inhibitory factors or prevention of binding of these inhibitory factors to minerals. The above strategies could be employed to provide better insights into the relevance of different processing methods, to help in the development of speciality foods with enhanced mineral bioaccessibility.

Fractionation of DMSO-Extracted and NaOH-Extracted Hemicelluloses by Gradient Ethanol Precipitation from Neosinocalamus affinis

Neosinocalamus affinis hemicelluloses were extracted with pure DMSO and 3% NaOH in sequence. The DMSO- and NaOH-extracted hemicelluloses were then successively fractionated by gradient ethanol precipitation. NaOH-extracted hemicellulosic fractions with different branch degree could be separated by gradient ethanol precipitation, while DMSO-extracted hemicellulosic fractions could not. FT-IR spectra showed that DMSO-extracted fractions have more complete structure, while NaOH-extracted fractions have no acetyl at all. The FT-IR and NMR revealed that the DMSO-extracted Neosinocalamus affinis hemicelluloses were 4-O-methyl-glucuronoarabinoxylans consisting of a linear (1→4)-β-D-xylopyranosyl backbone with branches at O-2,3 of acetyl, O-2 of 4-O-methyl-a-D glucuronic acid, and O-3 of arabinose.

Traditional Cereal Food as Container of Probiotic Bacteria “Lb. rhamnosusGG”: Optimization by Response Surface Methodology

This research paper aims at optimizing three parameters involved in solid state fermentation (SSF) usingLactobacillus rhamnosusGG (LGG) to improve a traditional cereal food “Bsissa” in order to elaborate a new probiotic fermented breakfast cereal. A Box-Behnken experimental design was used and the optimal fermentation conditions were liquid to solid ratio: 1.2 (vw−1), fermentation time: 12 h, and sucrose concentration: 10.48 g (100 g DM)−1. Under these conditions, the viable LGG cells, the free amino nitrogen content, and the total acidity were obtained to be9.1 log10⁡(cfu g-1), 12.95 (mg g−1), and 6.46 (μmol g−1), respectively. After three weeks of refrigerated storage, the viability of LGG in the fermented Bsissa was8.23 log10⁡(cfu g-1). This study shows a new possibility to make an acceptable nonfermented dairy product based mainly on cereals, leguminous plants, spices, and aromatic herbs, which are suitable substrates able to support the high probiotic viability.

Evaluation of genotypic wheat bran varieties for nutraceutical compounds

The proximate composition and bioactive components were screened in eight wheat bran cultivars such as UAS (304, 415, 428), DWR (162, 185, 1006) and DDK (1025, 1029). The results showed that carbohydrate content ranged from 62.3 to 73.9%, protein 11-21%, fat 2.4-5.6%, ash content 5-6.5% among the wheat bran genotypes and dietary fiber content was found to be between 21 and 52%. Mineral content vary viz., Fe (0.7-2.45), Mg (4.78-8.36), K (16.47-44.58), Zn (0.78-1.44), Cu (3.35-15.79), Na (1.22-7.14) and Mn (21.77-70.09) μg/gm, highest being in UAS-428 variety, except for Ca content. Linoleic acid was the major fatty acid present to the extent of 47-53%. The antioxidant capacity of wheat bran extract through free radical scavenging showed the IC50 values (mg/mL) of 9.4 for UAS 428 and 10.55 for UAS 415 indicating higher activity. The steryl ferulates, total tocopherols and carotenoids were estimated as fat soluble nutraceuticals. Higher content of steryl ferulate was observed in DWR 185 (477 mg/100 g) followed by DDK 1025 (465 mg/100 g) and the least in UAS 415 (119 mg/100 g) variety. In conclusion genotypic wheat bran is an important source of dietary micronutrients like minerals especially in UAS variety with a potential free radical reducing ability. These varieties have health protective properties and can be incorporated in various food formulations for improved lifestyles.

Characterization and mutagenesis of two novel iron-sulphur cluster pentonate dehydratases

We describe here the identification and characterization of two novel enzymes belonging to the IlvD/EDD protein family, the D-xylonate dehydratase from Caulobacter crescentus, Cc XyDHT, (EC 4.2.1.82), and the L-arabonate dehydratase from Rhizobium leguminosarum bv. trifolii, Rl ArDHT (EC 4.2.1.25), that produce the corresponding 2-keto-3-deoxy-sugar acids. There is only a very limited amount of characterization data available on pentonate dehydratases, even though the enzymes from these oxidative pathways have potential applications with plant biomass pentose sugars. The two bacterial enzymes share 41 % amino acid sequence identity and were expressed and purified from Escherichia coli as homotetrameric proteins. Both dehydratases were shown to accept pentonate and hexonate sugar acids as their substrates and require Mg(2+) for their activity. Cc XyDHT displayed the highest activity on D-xylonate and D-gluconate, while Rl ArDHT functioned best on D-fuconate, L-arabonate and D-galactonate. The configuration of the OH groups at C2 and C3 position of the sugar acid were shown to be critical, and the C4 configuration also contributed substantially to the substrate recognition. The two enzymes were also shown to contain an iron-sulphur [Fe-S] cluster. Our phylogenetic analysis and mutagenesis studies demonstrated that the three conserved cysteine residues in the aldonic acid dehydratase group of IlvD/EDD family members, those of C60, C128 and C201 in Cc XyDHT, and of C59, C127 and C200 in Rl ArDHT, are needed for coordination of the [Fe-S] cluster. The iron-sulphur cluster was shown to be crucial for the catalytic activity (kcat) but not for the substrate binding (Km) of the two pentonate dehydratases.

Dry heat treatment affects wheat bran surface properties and hydration kinetics

Heat stabilization of wheat bran aims at inactivation of enzymes which may cause rancidity and processability issues. Such treatments may however cause additional unanticipated phenomena which may affect wheat bran technological properties. In this work, the impact of toasting on wheat bran hydration capacity and hydration kinetics was studied. Hydration properties were assessed using the Enslin-Neff and drainage centrifugation water retention capacity methods, thermogravimetric analysis and contact angle goniometry, next to more traditional methods. While equilibrium hydration properties of bran were not affected by the heat treatment, the rate at which the heat treated bran hydrated was, however, very significantly reduced compared to the untreated bran. This phenomenon was found to originate from the formation of a lipid coating during the treatment rendering the bran surface hydrophobic. These insights help to understand and partially account for the modified processability of heat treated bran in food applications.

Flavourzyme, an Enzyme Preparation with Industrial Relevance: Automated Nine-Step Purification and Partial Characterization of Eight Enzymes

Flavourzyme is sold as a peptidase preparation from Aspergillus oryzae. The enzyme preparation is widely and diversely used for protein hydrolysis in industrial and research applications. However, detailed information about the composition of this mixture is still missing due to the complexity. The present study identified eight key enzymes by mass spectrometry and partially by activity staining on native polyacrylamide gels or gel zymography. The eight enzymes identified were two aminopeptidases, two dipeptidyl peptidases, three endopeptidases, and one α-amylase from the A. oryzae strain ATCC 42149/RIB 40 (yellow koji mold). Various specific marker substrates for these Flavourzyme enzymes were ascertained. An automated, time-saving nine-step protocol for the purification of all eight enzymes within 7 h was designed. Finally, the purified Flavourzyme enzymes were biochemically characterized with regard to pH and temperature profiles and molecular sizes.

L-arabinose/D-galactose 1-dehydrogenase of Rhizobium leguminosarum bv. trifolii characterised and applied for bioconversion of L-arabinose to L-arabonate with Saccharomyces cerevisiae

Four potential dehydrogenases identified through literature and bioinformatic searches were tested for L-arabonate production from L-arabinose in the yeast Saccharomyces cerevisiae. The most efficient enzyme, annotated as a D-galactose 1-dehydrogenase from the pea root nodule bacterium Rhizobium leguminosarum bv. trifolii, was purified from S. cerevisiae as a homodimeric protein and characterised. We named the enzyme as a L-arabinose/D-galactose 1-dehydrogenase (EC 1.1.1.-), Rl AraDH. It belongs to the Gfo/Idh/MocA protein family, prefers NADP(+) but uses also NAD(+) as a cofactor, and showed highest catalytic efficiency (k cat/K m) towards L-arabinose, D-galactose and D-fucose. Based on nuclear magnetic resonance (NMR) and modelling studies, the enzyme prefers the α-pyranose form of L-arabinose, and the stable oxidation product detected is L-arabino-1,4-lactone which can, however, open slowly at neutral pH to a linear L-arabonate form. The pH optimum for the enzyme was pH 9, but use of a yeast-in-vivo-like buffer at pH 6.8 indicated that good catalytic efficiency could still be expected in vivo. Expression of the Rl AraDH dehydrogenase in S. cerevisiae, together with the galactose permease Gal2 for L-arabinose uptake, resulted in production of 18 g of L-arabonate per litre, at a rate of 248 mg of L-arabonate per litre per hour, with 86 % of the provided L-arabinose converted to L-arabonate. Expression of a lactonase-encoding gene from Caulobacter crescentus was not necessary for L-arabonate production in yeast.

Expression and distribution of cellulase, amylase and peptidase isoforms along the midgut of Morimus funereus L. (Coleoptera: Cerambycidae) larvae is dependent on nutrient substrate composition

The influence of diet composition--two substrates, wheat bran and sawdust--on isoform expression of digestive enzymes (cellulase, amylase and peptidase) in the midgut of Morimus funereus larvae was examined. Their impact on larval development was demonstrated by measuring the increase of larval weight during development and by analysis of digestive enzymes zymographic profiles, where the expression of cellulase isoforms from M. funereus larvae midgut has been examined for the first time in this study. Larvae reared on wheat bran had higher body weight between day 60 and day 100 than larvae reared on sawdust; however, both groups achieved similar body weight after day 110. Wheat bran as substrate induced different cellulase and amylase isoforms. Oak sawdust in substrate acted as inducer of peptidases. The highest cellulase activity and the greatest isoform variability were detected in the midgut extracts of larvae reared on wheat bran. From our results it can be assumed that M. funereus endocellulase, amylase and peptidase are secreted in the anterior midgut, and their concentration gradually decreases towards the hindgut.

Properties of bread dough with added fiber polysaccharides and phenolic antioxidants: a review

During breadmaking, different ingredients are used to ensure the development of a continuous protein network that is essential for bread quality. Interests in incorporating bioactive ingredients such as dietary fiber (DF) and phenolic antioxidants into popular foods such as bread have grown rapidly, due to the increased consumer health awareness. The added bioactive ingredients may or may not promote the protein cross-links. Appropriate cross-links among wheat proteins, fiber polysaccharides, and phenolic antioxidants could be the most critical factor for bread dough enhanced with DF and phenolic antioxidants. Such cross-links may influence the structure and properties of a bread system during baking. This article presents a brief overview of our current knowledge of the fate of the key components (wheat proteins, fibers, and phenolic antioxidants) and how they might interact during bread dough development and baking.

Optimization of acid hydrolysis conditions for feruloylated oligosaccharides from rice bran through response surface methodolgy

Response surface methodology (RSM) was employed to optimize the hydrolysis conditions with trifluoroacetic acid (TFA) to obtain the maximum amount of feruloylated oligosaccharides from rice bran. The TFA concentration and hydrolysis time effects on feruloylated oligosaccharides recovery are studied. The optimum hydrolysis conditions for maximizing feruloylated oligosaccharides recovery were 193 mM TFA concentration and 1.36 h of hydrolysis time. Under these conditions the corresponding acyl ferulic group quantity was 78.63 microg in 1 mL of hydrolysate. The model was experimentally verified with a satisfactory coefficient of R (2) (= 0.96). The quantity of acyl ferulic group in the feruloylated oligosaccharides, purified using Amberlite XAD-4, was 916.12 microg/g of rice bran under the optimum hydrolysis conditions. The proposed method accounted for 54.08% of the total acyl ferulic group in rice bran. The results suggest that the proposed conditions were useful in maximizing recovery of feruloylated oligosaccharides from rice bran.