Synthetic, implantable polymers for local delivery of IUdR to experimental human malignant glioma

Targeting of radio-enhancing drugs

OBJECTIVE

Toxicity to normal tissue is frequently the dose-limiting factor in the chemotherapy and mixed modality treatments of cancer. If the radio-enhancing drug could be localized at the disease site and released slowly over time, then systemic drug toxicities could be decreased while simultaneously maintaining high drug concentrations in the tumor. These considerations support a role for a sustained release intra-tumoral delivery systems for the delivery of radio-enhancing drugs.

METHODS

Two approaches aimed at achieving the end of localizing the radio-enhancing drug to the tumor are described. First, nanoparticles, which have a prolonged circulation time and facility for enhanced tumor targeting. Structural defects in the walls of the tumor vasculature allow the passage of particles too large to pass through the walls of normal blood vessels. This characteristic of tumor blood vessels, referred to as the enhanced permeability and retention (EPR) effect, allows relatively large entities (typically liposomes, nanoparticles, and macromolecular drugs) to pass from the blood vessels to tumor tissue and as a result nanoparticles accumulate in the tumor while being excluded from normal tissue. Second, biodegradable implanted polymers. In these devices, the radio-enhancing drug is physically trapped within the polymer matrix which is implanted in the tumor. The drug is released as the polymer degrades in response to its local environment. The degradation rate of the polymer device can be adjusted to control the rate of drug release. By this means, the level of radio-enhancing drug can be maintained at the tumor site for the duration of radiation treatment.

RESULTS AND CONCLUSIONS

Results of experiments indicate that for both methods tumor control could be optimized by maintaining the radio-enhancing drug at a useful concentration in the tumor over a period of time compatible with the duration of fractionated radiation treatment. These studies have provided proof of principle support for the further development of this approach. To date, while some of the methods and devices for drug delivery described in this paper have been involved in clinical trials, none have so far been developed for routine clinical application.

Polymeric implants with drug-releasing capabilities: a mapping review of laboratory research

PURPOSE

To provide a systematic map of the nature and extent of preclinical research concerning drug-releasing polymeric implants.

SIGNIFICANCE

By summarizing available data, this mapping review can guide the development of new drug-delivery devices.

METHODS

In-vitro studies assessing drug-delivery implants were reviewed. A study protocol was registered at Open Science Framework. The association of polymers with prominent drugs, manufacturing processes, geometries, treatments, and anatomical locations was assessed using the VOSviewer software. The release periods were also evaluated.

RESULTS

A total of 423 articles, published between 1975 and 2020, were included and grouped into a framework with nine main categories. More than half of studies were published between 2010 and 2020. Among 201 individual polymers or combinations, the most investigated were PLGA, PCL, PLA, Silicone (SIL), EVA, and PU. Similarly, from 232 individual drugs or combinations, the most prominent were dexamethasone (DEX; anti-inflammatory), paclitaxel (PTX; anticancer), fluoruracil (anticancer), ciprofloxacin (CFX) hydrochloride (antibiotic), and gentamicin (GS; antibiotic). A total of 51 manufacturing processes were encountered, of which the most reported were solvent evaporation, compression molding (CM), extrusion (EX), electrospinning (ELS), and melt molding (MM). Among 38 implant geometries, cylinder (CIL) was the most prominent, followed by disk, square film, circular film (FCIR), and undefined film. Release times varied greatly, although the majority of articles ranged between 5 and 300 d.

CONCLUSIONS

Drug-delivery implants were highly heterogeneous due to its applicability for multiple health conditions. Most implants were made of PLGA and most drugs assessed presented anti-inflammatory, antibiotic, or anticancer effects. Solvent evaporation and CIL were the most prominent manufacturing process and geometry, respectively.

EFFECT OF THE ANGIOGENESIS INHIBITOR CILENGITIDE (EMD 121974) ON GLIOBLASTOMA GROWTH IN NUDE MICE

OBJECTIVE

To determine the effect of the angiogenesis inhibitor Cilengitide (EMD 121974) on glioblastoma growth and associated angiogenesis in the brains of nude mice.

METHODS

Human glioblastoma cells (10 U87MG cells) in 1 mul of medium were stereotactically injected during a 20-minute period into the caudate/putamen of nude mice. The mice were intraperitoneally treated daily with Cilengitide or solvent (control) beginning 5 days after tumor injection. The mice were sacrificed from 1 hour to 63 days after tumor implantation and examined for tumor size, vascularity, apoptosis, and cell replication.

RESULTS

This injection technique resulted in a highly reproducible, localized, spherical tumor cell placement in the parenchyma without reflux into the subarachnoid space or penetration into the ventricle. Serial brain sections showed the tumor size remained unchanged at 1 to 2 mm for approximately 30 to 40 days. Thereafter, the control tumors showed exponential growth to a volume of 120 mm, with death of the mice at approximately 8 to 9 weeks. Serial staining for Ki-67, a marker for cell replication, and CD31, an indicator for angiogenesis, demonstrated an increase in proportion to the growth of the tumor. In contrast, the tumor volume in Cilengitide-treated mice stayed unchanged at 1 to 2 mm during the entire length of the experiment, with staining for Ki-67 and CD31 remaining low.

CONCLUSION

This standardized brain tumor model is highly reproducible and useful for testing new treatment regimens. Cilengitide is highly effective in suppressing blood vessel growth, thereby controlling orthotopic growth of this glioblastoma cell line.

Carboplatin Sustained Delivery System Using Injectable Microspheres

A controlled carboplatin delivery system using biodegradable polymer has been used in this study. The purpose was to evaluate the local and systemic effects of injectable, biodegradable microspheres containing carboplatin when injected as aqueous suspension subcutaneously in rats. Biocompatibility and toxicity of empty microspheres and microspheres loaded with carboplatin were evaluated by clinical and histological examination. The diffusion of carboplatin in tissues and time of drug release were evaluated by platinum determination in plasma and tissues over the time. The results of the study suggest that microspheres provide a sustained slow release of carboplatin and that multiple inoculations of microspheres containing drug and no evidence of local or systemic toxicity is found. This device may be useful in the treatment of solid tumours.

Enhanced relaxation of nanoparticle-bound supercoiled DNA in X-ray radiation

A therapeutic methodology was developed based on the large X-ray absorption cross-section of gold nanoparticles at high photon energies (>81 keV). Experimental results showed that the amounts of the relaxed circular supercoiled DNA (scDNA) for gold nanoparticle-bound scDNA were more than doubled compared to that for free scDNA under otherwise identical radiation conditions.

Sensitization to Radiation from an Implanted125I Source by Sustained Intratumoral Release of Chemotherapeutic Drugs

We have investigated tumor response to low-dose-rate irradiation from an implanted 125I source alone or in conjunction with intratumoral drug administration. The drug (cis-DDP or 5-FU) was incorporated homogeneously into the co-polymer CPP-SA, 20:80, and the polymer/drug rods were implanted in the RIF-1 fibrosarcomas growing subcutaneously in C3H mice. Twenty-four hours later, the tumor was implanted with an 125I seed. Tumor growth time was the end point in these experiments. For implanted 125I sources of different dose rates and implant times giving a range of total doses, a consistent dose-response relationship was shown between tumor growth time and total dose. In other experiments, 125I sources of different specific activities were implanted for periods of time adjusted so that the total dose to the tumor was always the same. When the 125I implant was combined with 5-FU, greater than additive responses were seen for both short (30 h) and long (96 h) 125I treatment times. In contrast, a short-duration (30 h) 125I implant combined with cis-DDP was the least effective treatment, giving a combined response that was no better than additive, whereas 96 h exposure to 125I combined with cis-DDP was the most effective combined treatment. It is conjectured that this inverse dose-rate effect seen when cis-DDP is combined with low-dose rate radiation is related to a cell cycle effect and/or to inhibition of repair of radiation damage by cis-DDP.

Treatment of intracranial rat glioma model with implant of radiosensitizer and biomodulator drug combined with external beam radiotherapy

PURPOSE

To evaluate an intracranial polymer implant containing bromodeoxyuridine (BrdUrd) and N-(phosphonacetyl)-L-aspartic acid (PALA) in combination with external beam radiotherapy (EBRT) in the treatment of a rat glioma.

METHODS AND MATERIALS

Combinations of the biomodulators 5-fluorouracil, methotrexate, or PALA with BrdUrd were evaluated as radiosensitizers in vitro by clonogenic assay. In in vivo experiments, BrdUrd and PALA were incorporated into a polyanhydride-based polymer, bis(p-carboxyphenoxy)propane sebacic acid, and implanted in the C6 rat glioma growing intracranially. The effectiveness of treatment was evaluated on the basis of survival. EBRT was given as 10-MV X-rays.

RESULTS

In tissue culture experiments, C6 cells were refractory to radiosensitization by BrdUrd even when the thymidine analog was combined with a biomodulator intended to reduce de novo thymidine synthesis. The most effective compound in vitro was PALA. When PALA and BrdUrd in a polymer formulation were implanted intracranially and combined with 10-Gy EBRT, the treatment was highly effective, with 83% of treated rats surviving 180 days.

CONCLUSION

Although the in vitro results were not encouraging, the combination of intratumoral BrdUrd and PAL with 10-Gy EBRT was highly effective in treating a rat glioma. These results indicate the clinical potential of combined and mixed modality treatments involving intratumoral sustained-release drug delivery.

Etanidazole-loaded microspheres fabricated by spray-drying different poly(lactide/glycolide) polymers: effects on microsphere properties

In this work, a spraying technique was used to encapsulate etanidazole (a hypoxic radiosensitizer) into different poly(lactide/glycolide) polymers. The properties of the obtained microspheres, especially the particle size and distribution, morphology and release rate were investigated. Unexpectedly, poly(L-lactide) (PLLA) shows a fast release rate, comparable to PLGA 50: 50, due to the dissociation of the microspheres although the release rate of the spray-dried microspheres of other polymers decreases with increasing lactide ratio. It is also interesting to note that, contrary to the viscosity sequence of the polymer solutions, the particle size of the microspheres decreases in the order PLGA 50: 50, PLGA 65: 35, PLGA 85: 15 and PDLA. The morphology of microspheres can be affected by polymer properties (e.g. lactide/glycolide ratio, molecular weight, crystallinity and Tg) and fabrication conditions (e.g. solvent and polymer concentration to be sprayed). Although most of the microspheres fabricated by EA have a donghnut-like shape with smooth surface, it is possible to obtain spherical particles by choosing proper polymer type and polymer concentration. A further examination of the mechanisms of the atomization process and the solvent evaporation process reveals their respective effect on droplet formation and particle formation, both of which are essential for the spray-drying technique. It is found that polymer phase transition (affected by the polymer solubility) and its subsequent solvent evaporation processes can finally determine the morphology and the particle size of the spray-dried particles made from different polymers. In essence, the lactide/glycolide ratio of the polymers plays a more important role in affecting the properties of the spray-dried microspheres.

Therapeutic effectiveness of novel 5-fluorouracil-loaded poly(methylidene malonate 2.1.2)-based microspheres on F98 glioma-bearing rats

BACKGROUND

Drug delivery to the central nervous system (CNS) remains a real challenge for neurosurgeons and neurologists, because many molecules cannot cross the blood-brain barrier (BBB). In recent years, solid polymeric materials have been implanted into animal and human brains either by surgery or using stereotactic methods to assure the controlled release of a drug over a determined period, thus circumventing the difficulties posed by the BBB. Poly(methylidene malonate 2.1.2) (PMM 2.1.2) is a new polymer that was described a few years ago and that allows the fabrication of novel, 5-fluorouracil (5-FU)-loaded PMM 2.1.2 microspheres. The objective of the current study was to assess the therapeutic effectiveness of those particles in a rat brain tumor model, the F98 glioma.

METHODS

Forty-three rats were used in this study. First, a histologic evaluation of the F98 tumor model was performed on Fischer female rats. Thereafter, different groups of rats were injected and were treated with 5-FU microspheres in 2 different suspension media: carboxymethylcellulose (CMC) aqueous solution with or without 5-FU.

RESULTS

The tumor was confirmed as extremely aggressive and invasive, even in early development. The 5-FU-loaded microspheres improved rat median survival significantly compared with untreated animals, CMC-treated animals, and 5-FU solution-treated animals when injected in CMC without 5-FU, demonstrating the interest of a sustained release and the efficacy of intratumoral chemotherapy against an established tumor.

CONCLUSIONS

PMM 2.1.2 microspheres appeared to be a promising system, because their degradation rate in vivo was longer compared with many polymers, and they may be capable of long-term delivery.

Clinical significance of atomic inner shell ionization (ISI) and Auger cascade for radiosensitization using IUdR, BUdR, platinum salts, or gadolinium porphyrin compounds

PURPOSE

Halogenated pyrimidines (iododeoxyuridine [IUdR] and bromodeoxyuridine [BUdR]), platinum salts, and gadolinium porphyrins are heavy atom compounds used as radiosensitizers. For IUdR, it has been hypothesized that iodine inner shell ionizations (ISI) and Auger cascades could be one of the primary radiosensitization mechanisms. The purpose of this paper is to estimate the number of ISI produced per tumor cell and per 2 Gy irradiation in clinically relevant modelings.

MATERIALS AND METHODS

ISI were evaluated using a two-step method. Photon-induced ISI were calculated using the MCNP-4C Monte Carlo code, heavy atom concentrations from clinical data published in the literature, and at various depths in a water phantom irradiated with 6-MV, (60)Co, (137)Cs, or (192)Ir sources. Electron knock-on induced ISI on K, L, and M atomic shells were evaluated with an hybrid method, using simulated electron spectra and cross-sections derived from the Møller formalism. Using a biological dose equivalence of 0.05 Gy per cell ISI, relative biological effectiveness (RBE) values were calculated for each situation.

RESULTS

For platinum and gadolinium, ISI occurs in far less than 0.1% of the cell, whichever is the configuration. For IUdR and BUdR, ISI occurs in between 45% to 483% of the cell. Due to spectrum degradation, about 3 times more photoelectric ISI are generated at greater than shallower depths, and 10 times more for (192)Ir compared with (60)Co or 6-MV X-rays. Photoelectric ISI are about 3 times more frequent for iodine than bromine, but electron knock-on ISI are more frequent on bromine, and at the end about the same number of ISI are generated for both elements. RBEs were found to be between 1.01 and 1.12 for clinically relevant irradiation settings.

CONCLUSIONS

The mechanisms of radiosensitization for platinum and gadolinium are clearly not related to an Auger cascade. For halogenated pyrimidines, however, clinically relevant numbers of ISI are generated within each cell. For IUdR, ISI appears to be strongly tied to the photon spectra. Halogenated pyrimidines should be evaluated again clinically, but using lower energy photons like a (192)Ir implant.

Local drug delivery to the brain

The controlled local delivery of antineoplastic agents by biodegradable polymers is a technique that allows for exposure of tumor cells to therapeutic doses of an active agent for prolonged periods of time while avoiding high systemic doses associated with debilitating toxicities. The use of polymers for chemotherapy delivery expands the spectrum of available treatment of neoplasms in the central nervous system, and facilitates new approaches for the treatment of malignant gliomas. In this article, we discuss the rationale and history of the development and use of these polymers, and review the various agents that have used this technology to treat malignant brain tumors.

Intratumoral cancer chemotherapy and immunotherapy: opportunities for nonsystemic preoperative drug delivery

The recent literature documents the growing interest in local intratumoral chemotherapy as well as systemic preoperative chemotherapy with evidence for improved outcomes using these therapeutic modalities. Nevertheless, with few exceptions, the conventional wisdom and standard of care for clinical and surgical oncology remains surgery followed by radiation and/or systemic chemotherapy, as deemed appropriate based on clinical findings. This, in spite of the fact that the toxicity of conventional systemic chemotherapy and immunotherapy affords limited effectiveness and frequently compromises the quality of life for patients. Indeed, with systemic chemotherapy, the oncologist (and the patient) often walks a fine line between attempting tumour remission with prolonged survival and damaging the patient's vital functions to the point of death. In this context, it has probably been obvious for more than 100 years, due in part to the pioneering work of Ehrlich (1878), that targeted or localized drug delivery should be a major goal of chemotherapy. However, there is still only limited clinical use of nonsystemic intratumoral chemotherapy for even those high mortality cancers which are characterized by well defined primary lesions i.e. breast, colorectal, lung, prostate, and skin. There has been a proliferation of intratumoral chemotherapy and immunotherapy research during the past two to three years. It is therefore the objective of this review to focus much more attention upon intratumoral therapeutic concepts which could limit adverse systemic events and which might combine clinically feasible methods for localized preoperative chemotherapy and/or immunotherapy with surgery. Since our review of intratumoral chemoimmunotherapy almost 20 years ago (McLaughlin & Goldberg 1983), there have been few comprehensive reviews of this field; only one of broad scope (Brincker 1993), three devoted specifically to gliomas (Tomita 1991; Walter et al. 1995; Haroun & Brem 2000), one on hepatomas (Venook 2000), one concerning veterinary applications (Theon 1998), and one older review of dermatological applications (Goette 1981). However, none have shed light on practical opportunities for combining intratumoral therapy with subsequent surgical resection. Given the state-of-the-art in clinical and surgical oncology, and the advances that have been made in intratumoral drug delivery, minimally invasive tumour access i.e. fine needle biopsy, new drugs and drug delivery systems, and preoperative chemotherapy, it is timely to present a review of studies which may suggest future opportunities for safer, more effective, and clinically practical non-systemic therapy.

Radiosensitization by bromodeoxyuridine and hyperthermia: analysis of linear and quadratic parameters of radiation survival curves of two human tumor cell lines

Sensitization by bromodeoxyuridine (BrdUrd) and hyperthermia (HT) on cell reproductive death induced by ionizing radiation was analyzed using the linear-quadratic [S(D)/S(0)=exp(-(alphaD + betaD2)]] model. Plateau-phase human lung tumor cells (SW-1573) and human colorectal carcinonoma cells (RKO) were treated with BrdUrd, radiation and HT. LQ-analysis was performed at iso-incubation dose and at iso-incorporation level of BrdUrd. and at iso-HT doses and iso-survival levels after HT. Clonogenic assays were performed 24 h after treatment to allow repair of potentially lethal damage (PLD). In SW cells BrdUrd. HT or the combination significantly increased the alpha-parameter (factor 2.0-5.7), without altering the beta-parameter. In RKO cells sensitization with BrdUrd increased both a (factor 1.4) and beta (factor 1.3) while HT only influenced beta (factor 2.1-4.0). The combination did not further increase the a and beta. The results indicate that BrdUrd has its main effect on the parameter alpha, dominant at clinically relevant radiation doses but that HT can affect both a and beta. The addition of BrdUrd and HT provides a method to enhance the efficacy of radiotherapy.

Controlled release of vancomycin from biodegradable microcapsules

Poly D,L-lactic acid (PLA) and its copolymers with glycolide PLGA 90:10 and 70:30 were polymerized under various conditions to yield polymers in the molecular weight range 12000-40000 daltons, as determined by gel permeation chromatography. Vancomycin hydrochloride was the hydrophilic drug of choice for the treatment of methicillin resistant Staphyloccoccal infections. It was microencapsulated in the synthesized polymers using water-oil-water (w/o/w) double emulsion and solvent evaporation. The influence of microcapsule preparation medium on product properties was investigated. An increase in polymer-to-drug ratio from 1:1 to 3:1 caused an increase in the encapsulation efficiency (i.e. from 44-97% with PLGA). An increase in the emulsifier (PVA) molecular weight from 14-72 kD caused an increase in encapsulation efficiency and microcapsule size. The in vitro release of vancomycin from microcapsules in phosphate buffer saline (pH 7.4) was found to be dependent on molecular weight and copolymer type. The kinetic behaviour was controlled by both diffusion and degradation. Sterilization with 60Co (2.5 Mrad) also affected the degradation rate and release profiles. Degradation of microcapsules could be seen by scanning electron microscopy, by the increase in the release rate from PLA and by the decrease in the Tg values of microcapsules. In vitro bactericidal effects of the microcapsule formulations on S. aureus were determined with a special diffusion cell after the preparations had been sterilized, and were found to have bactericidal effects lasting for 4 days.

Local drug delivery

Intensive research efforts are now focused on the development of new strategies for more effective delivery of drugs to the central nervous system. These strategies include chemical modification of drugs, disruption of the blood-brain barrier, and utilization of alternative routes for drug delivery. This paper focuses on local drug delivery for the treatment of brain tumors. It reviews papers published in the past year on local chemotherapy and immunotherapy. Other aspects of local drug delivery are discussed, including convection-enhanced delivery and drug delivery via a controlled-release microchip.

Implantable polymers for tirapazamine treatments of experimental intracranial malignant glioma

Malignant gliomas remain refractory to intensive radiotherapy and cellular hypoxia enhances clinical radioresistance. Under hypoxic conditions, the benzotriazine di-N-oxide (3-amino-1,2,4-benzotriazine 1,4-dioxide) (tirapazamine) is reduced to yield a free-radical intermediate that results in DNA damage and cellular death. For extracranial xenografts, tirapazamine treatments have shown promise. We therefore incorporated tirapazamine into the synthetic, biodegradable polymer, measured the release, and tested the efficacy both alone and in combination with external beam radiotherapy in the treatment of experimental intracranial human malignant glioma xenografts. The [(poly(bis(p-carboxyphenoxy)-propane) (PCPP):sebacic acid (SA) (PCPP:SA ratio 20:80)] polymer was synthesized. The PCPP:SA polymer and solid tirapazamine were combined to yield proportions of 20% or 30% (wt/wt). Polymer discs (3 x 2 mm) (10 mg) were incubated (PBS, 37 degrees C), and the proportion of the drug released vs. time was recorded. Male nu/nu nude mice were anesthetized and received intracranial injections of 2 x 10(5) U251 human malignant glioma cells. For single intraperitoneal (i.p.) drug and/or external radiation treatments, groups of mice had i.p. 0.3 mmol/kg tirapazamine, 5 Gy cranial irradiation, or combined treatments on day 8 after inoculation. For fractionated drug and radiation treatments, mice had i.p. 0.15 mmol/kg tirapazamine, 5 Gy radiation, or combined treatments on days 8 and 9 after inoculation. For intracranial (i.c.) polymer treatments, mice had craniectomies and intracranial placement of polymer discs at the site of cellular inoculation. The maximally tolerated percentage loading of tirapazamine in the polymer.disc was determined. On day 7 after inoculation, groups of mice had i.c. empty or 3% tirapazamine alone or combined with radiation (5 Gy x 2 doses) or combined with i.p. drug (0.15 mmol/kg x 2 doses on days 8 and 9). Survival was recorded. Polymers showed controlled, protracted in vitro release for over 100 days. The 5 Gy x 1 treatment resulted in improved survival; 28.5 +/- 3.7 days (P = 0.01 vs. controls), while the single i.p. 0.3 mmol/kg tirapazamine treatment, 17.5 +/- 1.9 days (P = NS) and combined treatments; 21.5 +/- 5.0 days (P = NS) were not different. The fractionated treatments: 5 Gy x 2, i.p. 0.15 mmol/kg tirapazamine x 2 and the combined treatments resulted in improved survival: 44.5 +/- 3.9 (P < 0.001), 24.5 +/- 2.3 (P = 0.05) and 50.0 +/- 6.0 (P < 0.001), respectively. Survival after intracranial empty polymer was 16.5 +/- 3.0 days and increased to 31.0 +/- 3.0 (P = 0.003) days when combined with the 5 Gy x 2 treatment. The survival after the polymer bearing 3% tirapazamine alone vs. combined with radiation was not different. The combined 3% tirapazamine polymer, i.p. tirapazamine, and radiation treatments resulted in both early deaths and the highest long-term survivorship. The basis for potential toxicity is discussed. We conclude that implantable biodegradable polymers provide controlled intracranial release for treatment of experimental glioma. For treatment of malignant gliomas, the combination of continuous polymer-mediated delivery and fractionated systemic delivery of tirapazamine with external beam radiotherapy warrants further exploration.