Replication of the R6K gamma origin in vitro: dependence on wt pi and hyperactive piS87N protein variant

Cooperative binding mode of the inhibitors of R6K replication, pi dimers

The replication initiator protein, pi, plays an essential role in the initiation of plasmid R6K replication. Both monomers and dimers of pi bind to iterons in the gamma origin of plasmid R6K, yet monomers facilitate open complex formation, while dimers, the predominant form in the cell, do not. Consequently, pi monomers activate replication, while pi dimers inhibit replication. Recently, it was shown that the monomeric form of pi binds multiple tandem iterons in a strongly cooperative fashion, which might explain how monomers outcompete dimers for replication initiation when plasmid copy number and pi supply are low. Here, we examine cooperative binding of pi dimers and explore the role that these interactions may have in the inactivation of gamma origin. To examine pi dimer/iteron interactions in the absence of competing pi monomer/iteron interactions using wild-type pi, constructs were made with key base changes to each iteron that eliminate pi monomer binding yet have no impact on pi dimer binding. Our results indicate that, in the absence of pi monomers, pi dimers bind with greater cooperativity to alternate iterons than to adjacent iterons, thus preferentially leaving intervening iterons unbound and the origin unsaturated. We discuss new insights into plasmid replication control by pi dimers.

Conjugal transfer of plasmid R6K gamma ori minireplicon derivatives from Escherichia coli to various genera of pathogenic bacteria

Three R6K-derived gamma ori minireplicons were successfully transferred by conjugation from Escherichia coli to several species of pathogenic bacteria. The pFL129 replicon encodes the wild-type initiation replication protein pi, while plasmids pFL130 and pAG101 encode mutant forms of the pi protein conferring the plasmid copy-up phenotype. Plasmids could be transferred to all recipient species tested, although high efficiency conjugal transfer was only obtained with genera of the Enterobacteriaceae. The efficiency of plasmid transfer to all recipients was lower for the copy-up derivatives, pFL130 and pAG101, than for pFL129. The three gamma ori replicons were stably maintained in all transconjugants except pFL129 in Listeria monocytogenes. The two mutant plasmids retained their copy-up phenotype in the new bacterial hosts.

Twenty years of the pPS10 replicon: insights on the molecular mechanism for the activation of DNA replication in iteron-containing bacterial plasmids

This review focuses on the contributions of the Pseudomonas replicon pPS10 to understanding the initiation of DNA replication in iteron-containing plasmids from Gram-negative bacteria. Dimers of the pPS10 initiator protein (RepA) repress repA transcription by binding to the two halves of an inverted repeat operator. RepA monomers are the active initiator species that bind to four directly repeated sequences (iterons). pPS10 initiator was the first Rep protein whose domains were defined (two "winged-helix," WH modules) and their binding sites were identified at each half of the iteron repeat. This was confirmed by the crystal structure of the monomer of a homologous initiator (RepE from F plasmid) bound to iteron DNA. The recently solved structure of the dimeric N-terminal domain (WH1) of pPS10 RepA, when compared to the RepE monomer, shows that upon dimer dissociation an alpha-helix at WH1 C-terminus becomes part of an interdomain beta-sheet. In solution, the iteron sequence, by itself, can induce the same kind of structural transformation in RepA. This seems to alter the package of both WH domains to adapt their DNA reading heads (HTH motifs) to the distinct spacing between half repeats in iterons and operator. Based on biochemical and spectroscopic work, structural and functional similarities were proposed between RepA and archaeal/eukaryal initiators. This was independently confirmed by the crystal structure of the archaeal initiator Cdc6. Characterization of mutants, either in pPS10 or in the Escherichia coli chromosome, has provided some evidence on a WH1-mediated interaction between RepA and the chromosomal initiator DnaA that results in a broadened-host range.

pi protein- and ATP-dependent transitions from 'closed' to 'open' complexes at the gamma ori of plasmid R6K

R6K-encoded pi protein can bind to the seven, 22 bp tandem iterons of the gamma origin. In this work, we use a variant of pi, His-pi.F107S, that is hyperactive in replication. In vitro, His-pi.F107S-dependent local DNA melting (open complex formation) occurs in the absence of host proteins (IHF/HU or DnaA) and it is positioned in the A + T-rich region adjacent to iterons. Experiments described here examine the effects of ATP, Mg2+ and temperature on the opening reaction. We show that the opening of the gamma origin can occur in the presence of ATP as well as AMP-PCP (a non-hydrolyzable ATP analog). This suggests that, for gamma origin, ATP hydrolysis may be unnecessary for open complex formation facilitated by His-pi.F107S. In the absence of ATP or Mg2+, His-pi.F107S yielded data suggestive of distortions in the iteron attributable to DNA bending rather than DNA melting. Our findings also demonstrate that ATP and pi stimulate open complex formation over a wide range of temperatures, but not at 0 degrees C. These and other results indicate that ATP and/or Mg2+ are not needed for His-pi.F107S binding to iterons and that ATP effects an allosteric change in the protein bound to gamma origin.

Characterization of His-tagged, R6K-encoded pi protein variants

The pi protein of plasmid R6K is a multifunctional replication (Rep) protein, its different activities attributable, in part, to different oligomeric states: monomers and dimers. We have previously shown that His-tagged variants of the protein can exhibit alterations in dimer stability. Herein, we examined the functional properties of selected His-tagged derivatives of pi (His-pi x wt and three hyperactive replication variants) to determine if the functionality of these proteins in replication, DNA binding, and oligomerization is altered. Our results indicate that these tagged proteins retain the characteristics previously demonstrated for their non-tagged counterparts making them suitable for ongoing studies of pi protein structure and functions in replication and transcription.

Dimers of pi protein bind the A+T-rich region of the R6K gamma origin near the leading-strand synthesis start sites: regulatory implications

The replication of gamma origin, a minimal replicon derived from plasmid R6K, is controlled by the Rep protein pi. At low intracellular concentrations, pi activates the gamma origin, while it inhibits replication at elevated concentrations. Additionally, pi acts as a transcription factor (auto)repressing its own synthesis. These varied regulatory functions depend on pi binding to reiterated DNA sequences bearing a TGAGNG motif. However, pi also binds to a "non-iteron" site (i.e., not TGAGNG) that resides in the A+T-rich region adjacent to the iterons. This positioning places the non-iteron site near the start sites for leading-strand synthesis that also occur in the A+T-rich region of gamma origin. We have hypothesized that origin activation (at low pi levels) would require the binding of pi monomers to iterons, while the binding of pi dimers to the non-iteron site (at high pi levels) would be required to inhibit priming. Although monomers as well as dimers can bind to an iteron, we demonstrate that only dimers bind to the non-iteron site. Two additional pieces of data support the hypothesis of negative replication control by pi binding to the non-iteron site. First, pi binds to the non-iteron site about eight times less well than it binds to a single iteron. Second, hyperactive variants of pi protein (called copy-up) either do not bind to the non-iteron site or bind to it less well than wild-type pi. We propose a replication control mechanism whereby pi would directly inhibit primer formation.

Regulatory implications of protein assemblies at the gamma origin of plasmid R6K - a review

Recognition of the replication origin (ori) by initiator protein is a recurring theme for the regulated initiation of DNA replication in diverse biological systems. The objective of the work reviewed here is to understand the initiation process focusing specifically on the gamma-ori of the antibiotic-resistance plasmid R6K. The control of gamma-ori copy number is determined by both plasmid-encoded and host-encoded factors. The two central regulatory elements of the plasmid are a multifunctional initiator protein pi, and sequence-related DNA target sites, the inverted half-repeats (IRs) and the direct repeats (DRs). The replication activator and inhibitor activities of pi seem to be at least partially distributed between two naturally occurring pi polypeptides (designated by their molecular weights pi35.0 and pi30.5). Regulatory variants of pi with altered states of oligomerization in nucleoprotein complexes with DRs and IRs have been isolated. The properties of these mutants laid the foundation for our model of pi protein activity which proposes that different protein surfaces are required for the formation of functionally distinct complexes of pi with DRs and IRs. These mutants also suggest that pi polypeptides have a modular structure; the C-terminus contains the DNA-binding domain while the N-terminus controls protein oligomerization. Additionally, pi35.0 binds to a novel DNA sequence in the A+T-rich segment of gamma-ori. This binding site is at or near the site from which synthesis of the leading strand begins.

Assemblies of replication initiator protein on symmetric and asymmetric DNA sequences depend on multiple protein oligomerization surfaces

The pi35.0 protein of plasmid R6K regulates transcription and replication by binding a DNA sequence motif (TGAGR) arranged either asymmetrically into 22 bp direct repeats (DRs) in the gamma origin, or symmetrically into inverted half-repeats (IRs) in the operator of its own gene, pir. The binding patterns of the two natural forms of the pi protein and their heterodimers revealed that the predominant species, pi35.0 (35.0 kDa), can bind to a single copy of the DR as either a monomer or a dimer while pi30.5 (30.5 kDa) binds only as a dimer. We demonstrate that only one subunit of a pi35.0 dimer makes specific contact with DNA. Electron microscopic (EM) analysis of the nucleoprotein complexes formed by pi35.0 and DNA fragments containing all seven DRs revealed coupled ("hand-cuffed") DNA molecules that are aligned in a parallel orientation. Antiparallel orientations of the DNA were not observed. Thus, hand-cuffing depends on a highly ordered oligomerization of pi35.0 in such structures. The pi protein (pi35.0, pi30.5) binds to an IR as a dimer or heterodimer but not as a monomer. Moreover, a single amino acid residue substitution, F200S (pir200), introduced into pi30.5 severely destabilizes dimers of this protein in solution and concomitantly prevents binding of this protein to the IR. This mutation also changes the stability of pi35.0 dimers but it does not change the ability of pi35.0 to bind IRs. To explain these observations we propose that the diverse interactions of pi variants with DNA are controlled by multiple surfaces for protein oligomerization.

Replication of R6K gamma origin in vitro: discrete start sites for DNA synthesis dependent on pi and its copy-up variants

The regulation of the plasmid R6K gamma origin (gamma ori) is accomplished through the ability of the pi protein to act as an initiator and inhibitor of replication. Hyperactive variants of this protein, called copy-up pi, allow four to tenfold increases of gamma ori plasmid DNA in vivo. The higher activity of copy-up pi variants could be explained by an increase in the initiator function, a decrease in the inhibitor activity, or a derepression of a more efficient mechanism of replication that can be used by wt pi (pi35. 0) only under certain conditions. We have compared the replication activities of wt pi35.0 and copy-up pi mutants in vitro, and analyzed the replication products. It is shown that copy-up variants are several-fold more active than wt pi35.0 in replication. This appears to be due to enhanced specific replication activity of copy-up mutants rather than elevated fractions of protein proficient in DNA binding. Furthermore, biochemical complementation revealed that pi200 (copy-up) is dominant over wt pi35.0. The elevated activity of copy-up pi is not caused by an increased rate of replisome assembly as inferred from in vitro replication assays in which the lag periods observed were similar to that of wt pi35.0. Moreover, only one round of semiconservative, unidirectional replication occurred in all the samples analyzed indicating that copy-up pi proteins do not initiate multiple rounds of DNA synthesis. Rather, a larger fraction of DNA template replicates in the presence of copy-up pi as determined by electron microscopy. Two clusters of discrete DNA synthesis start sites are mapped by primer extension near the stability (stb) locus of the gamma ori. We show that the start sites are the same in the presence of wt pi35.0 or copy-up proteins. This comparative analysis suggests that wt pi35.0 and copy-up variants utilize fundamentally similar mechanism(s) of replication priming.

Protein domains and conformational changes in the activation of RepA, a DNA replication initiator

RepA is the DNA replication initiator protein of the Pseudomonas plasmid pPS10. RepA has a dual function: as a dimer, it binds to an inversely-repeated sequence acting as a repressor of its own synthesis; as a monomer, RepA binds to four directly-repeated sequences to constitute a specialized nucleoprotein complex responsible for the initiation of DNA replication. We have previously shown that a Leucine Zipper-like motif (LZ) at the N-terminus of RepA is responsible for protein dimerization. In this paper we characterize the existence in RepA of two protein globular domains C-terminal to the LZ. We propose that dissociation of RepA dimers into monomers results in a conformational change from a compact arrangement of both domains, competent for binding to the operator, to an extended species that is suited for iteron binding. This model establishes the structural basis for the activation of DNA replication initiators in plasmids from Gram-negative bacteria.

Two forms of replication initiator protein: positive and negative controls

The pir gene of plasmid R6K encodes the protein, pi, a replication and transcription factor. Two translational options for the pir gene give rise to two forms of pi protein: a 35.0-kDa form (pi35.0) and a shortened 30.5-kDa form (pi30.5). Although both proteins bind to a series of 22-bp direct repeats essential for plasmid R6K replication, only pi35.0 can bind to a site in the (A.T)-rich segment of its gamma ori and activate the gamma ori in vivo and in vitro. However, unlike pi35.0, pi30.5can inhibit in vivo and in vitro replication (activated by pi35.0). We propose that the two forms of pi might have distinct functions in replication. We show that although both forms of pi produce dimers, the nature of these dimers is not identical. The N-terminal 37 amino acid residues appear to control the formation of the more stable pi35.0 dimers, whereas another, apparently weaker interface holds together dimers of pi30.5. We speculate that the leucine zipper-like motif, absent in pi30.5, controls very specific functions of pi protein.