Analysis of the antidiabetic drug acarbose by capillary electrophoresis

Utilisation of pH stacking in conjunction with a highly absorbing chromophore, 5-aminofluorescein, to improve the sensitivity of capillary electrophoresis for carbohydrate analysis

This study explores the use of pH stacking in conjunction with 5-aminofluorescein as a derivatization agent for the sensitive analysis of simple sugars such as glucose, lactose and maltotriose by capillary electrophoresis (CE). The derivatization agent was selected on the basis of its extremely high molar absorptivity, its compatibility with a 488nm light-emitting diode (LED) and the fact that it has two ionizable groups making it compatible with on-line stacking using a dynamic pH junction. The influence of both acetic and formic acids at concentrations of 0.19, 0.019 and 0.0019molL(-1) were investigated with regard to both derivatization efficiency and the ability to stack using a dynamic pH junction. Superior sensitivity and resolution was obtained in formic acid over acetic acid. Substantially lower peaks were obtained with 0.19molL(-1) formic acid when compared to 0.019 and 0.0019molL(-1) concentrations, which was confirmed by computer simulation studies to be due to the inadequate movement of the pH boundary for stacking. Further simulation studies combined with experimental data showed the separation with the best resolution and greatest sensitivity when the carbohydrates were derivatized with the 0.095molL(-1) formic acid. Utilisation of stacking via dynamic pH junction mode in conjunction with LED detection enabled efficiencies of 150,000 plates and detection limits in the order of 8.5x10(-8)molL(-1) for simple sugars such as glucose, lactose and maltotriose hydrate. The current system also demonstrates a 515 times improvement in sensitivity when compared to using a normal deuterium lamp, and 16 times improvement over other systems using LEDs.

Sensitive determination of carbohydrates labelled withp-nitroaniline by capillary electrophoresis with photometric detection using a 406 nm light-emitting diode

p-Nitroaniline was explored as a derivatising reagent for UV absorbance detection of carbohydrates after separation by CE. This derivatising agent has three advantages: first, it has excellent water solubility; second, it has high molar absorptivity; and third, it is possible to obtain sensitive detection using a UV or blue light-emitting diode (LED) as the light source. The labelling reaction took less than 30 min to complete with high reaction yield. The separation process was modelled and optimised using an artificial neural network. Nine carbohydrates were separated by a CE system within 16 min using a 0.17 M boric acid buffer at pH 9.7. On-column LED detection at 406 nm allowed the detection of carbohydrates with good detection limits (<1.1 microM or 8.8 fmol) and reproducible quantification in the concentration range of 2.6-200 microM. This method was applied successfully to the determination of component carbohydrates in some food samples.

Quantitative determination of voglibose in pharmaceutical tablets using high-performance liquid chromatography–fluorescence detection with post-column derivatization and mass spectrometric detection

A highly sensitive liquid chromatographic procedure with post-column derivatization using fluorescence detection (LC-FD) was developed and validated for the determination of voglibose in pharmaceutical tablets. Sample pre-treatment included a simple extraction and centrifugation without pre-column derivatization. Taurine and sodium periodate dissolved in water was used as a post-column reagent. Detection was performed at an excitation wavelength of 350 nm and an emission wavelength of 430 nm. LC separation was carried out in less than 25 min. In addition to the LC procedure with post-column derivatization, an LC-MS assay procedure was also investigated for the analysis of voglibose without derivatization. Voglibose was detected in an electrospray ionization (ESI) mode with single ion recording (SIR, m/z 268.1). After selection of the optimum conditions, both assay methods were validated, providing good performances with respect to precision, linearity and accuracy. Linearities of both methods were obtained with an average r(2)>0.999. The lower limits of detection (LLOD) were 9.4 and 18 ng/ml for LC-FD and LC-MS, respectively. Both methods could be successfully applied to the quantification of voglibose in commercially available tablets.

Derivatization of carbohydrates for chromatographic, electrophoretic and mass spectrometric structure analysis

Carbohydrates, either alone or as constituents of glycoproteins, proteoglycans and glycolipids, are mediators of several cellular events and (patho)physiological processes. Progress in the "glycome" project is closely related to the analytical tools used to define carbohydrate structure and correlate structure with function. Chromatography, electrophoresis and mass spectrometry are the indispensable analytical tools of the on-going research. Carbohydrate derivatization is required for most of these analytical procedures. This review article gives an overview of derivatization methods of carbohydrates for their liquid chromatographic and electrophoretic separation, as well as the mass spectrometric characterization. Pre-column and on-capillary derivatization methods are presented with special emphasis on the derivatization of large carbohydrates.

On-line capillary electrophoresis with mass spectrometry detection for the analysis of carbohydrates after derivatization with 8-aminonaphthalene-1,3,6-trisulfonic acid

Capillary electrophoresis (CE) with mass spectrometry (MS) detection is an ideal tool for analytical use, which combines a nano quantity assay with mass determination. Carbohydrate analysis has always been a challenge because of the inherent structural complexity and the lack of a chromophore, unless derivatization is used. Here we use the derivatization of carbohydrates with a fluorophore, 8-aminonaphthalene-1,3,6-trisulfonic acid (ANTS). This chromophore has two advantages, first, it facilitates UV and fluorescence detection and, second, it introduces negative charge to the analyte, which enhances zone electrophoretic separation. In this study, CE combined with negative ion electrospray MS (ESI-MS) was evaluated for the on-line analysis of ANTS labeled carbohydrates and cellulose fragments. The CE system was connected to the MS by a sheath-liquid electrospray arrangement. The ANTS reagent and Dextrin-15, which contains oligomers of maltose, were used as model samples for ESI-MS optimization in flow-injection-MS and CE-MS modes, respectively. Various sheath-liquid compositions regarding organic modifier (isopropanol, methanol, or acetonitrile) and electrolyte (acetic acid-formic acid, ammonium acetate, or triethylamine) were studied. The response as well as the analyte charge state distribution was found to be dependent on the composition and the orifice voltage. Low-pH conditions with isopropanol as organic modifier were sensitive, stable, and the most favorable for analysis.

Derivatization trends in capillary electrophoresis

This survey gives an overview of recent derivatization protocols, starting from 1996, in combination with capillary electrophoresis (CE). Derivatization is mainly used for enhancing the detection sensitivity of CE, especially in combination with laser-induced fluorescence. Derivatization procedures are classified in tables in pre-, on- and postcapillary arrangements and, more specifically, arranged into functional groups being derivatized. The amine and reducing ends of saccharides are reported most frequently, but examples are also given for derivatization of thiols, hydroxyl, carboxylic, and carbonyl groups, and inorganic ions. Other reasons for derivatization concern indirect chiral separations, enhancing electrospray characteristics, or incorporation of a suitable charge into the analytes. Special attention is paid to the increasing field of research using on-line precapillary derivatization with CE and microdialysis for in vivo monitoring of neurotransmitter concentrations. The on-capillary derivatization can be divided in several approaches, such as the at-inlet, zone-passing and throughout method. The postcapillary mode is represented by gap designs, and membrane reactors, but especially the combination of separation, derivatization and detection on a chip is a new emerging field of research. This review, which can be seen as a sequel to our earlier reported review covering the years 1991-1995, gives an impression of current derivatization applications and highlights new developments in this field.

Strategies to improve the sensitivity in capillary electrophoresis for the analysis of drugs in biological fluids

Capillary electrophoresis (CE) is a useful method to quantify drugs in biological fluids. However, especially for blood or plasma samples, the sensitivity is not sufficient to quantify drugs and their metabolites as they often need to be quantified in the lower microg/L range. To overcome this limitation and to increase the sensitivity, two strategies are applied: first, to increase the amount of analyte added to the capillary and, second, to increase the sensitivity on the detector site. To improve the sensitivity on the detector site, alternative detection techniques to UV detection, e.g., laser-induced fluorescence detection (LIF) or mass spectroscopy (MS), can be applied. However, LIF detection can only be used for fluorescent analytes and the current equipment for CE-MS coupling provides only small improvements in sensitivity compared to UV detection. The detection window for UV detection can be enhanced using capillaries with an extended light path (bubble cell) or Z-shaped capillaries. Sensitivity improvements up to a factor of 10 have been reported. Increasing the amount of analyte in the capillary can be done either by chromatographic or by electrokinetic methods. Chromatographic methods such as on-capillary membrane preconcentration have been used for several analytes. However, no validated application has been reported to date. In contrast, several validated examples can be found in which electrokinetic techniques like sample stacking have been applied to achieve limits of quantification in the lower microg/L range. In conclusion, to date, electrokinetic techniques such as field-amplified sample injection offer the most promising results in achieving a sufficient sensitivity to quantify drugs in biological fluids.

Capillary electrophoresis in clinical and forensic analysis: recent advances and breakthrough to routine applications

This paper is a comprehensive review article on capillary electrophoresis (CE) in clinical and forensic analysis. It is based upon the literature of 1997 and 1998, presents CE examples in major fields of application, and provides an overview of the key achievements encountered, including those associated with the analysis of drugs, serum proteins, hemoglobin variants, and nucleic acids. For CE in clinical and forensic analysis, the past two years witnessed a breakthrough to routine applications. As most coauthors of this review are associated with diagnostic or forensic laboratories now using CE on a routine basis, this review also contains data from routine applications in drug, protein, and DNA analysis. With the first-hand experience of providing analytical service under stringent quality control conditions, aspects of quality assurance, assay specifications for clinical and forensic CE and the pros and cons of this maturing, cost-and pollution-controlled age technology are also discussed.

Capillary electrophoresis as a versatile tool for the bioanalysis of drugs--a review

This review article presents an overview of current research on the use of capillary electrophoretic techniques for the analysis of drugs in biological matrices. The principles of capillary electrophoresis and its various separation and detection modes are briefly discussed. Sample pretreatment methods which have been used for clean-up and concentration are discussed. Finally, an extensive overview of bioanalytical applications is presented. The bioanalyses of more than 200 drugs have been summarised, including the applied sample pretreatment methods and the achieved detection limits.

Development and validation of liquid chromatography and capillary electrophoresis methods for acarbose determination in pharmaceutical tablets

Liquid chromatography and capillary zone electrophoresis, respectively coupled to an evaporative light scattering detector and a UV detector have been developed for the analysis of acarbose without any derivatization procedure. The electrophoretic separation of acarbose anomers was achieved through the manipulation of the working temperature. Both methods were validated and showed good validation data in terms of precision, accuracy and linearity. The validated methods were successfully applied to the dosage of acarbose in commercially available Glucobay tablets.

A literature assessment of sample pretreatments and limits of detection for capillary electrophoresis of drugs in biological fluids and practical investigation with some antimalarials in plasma

A literature survey on published reports of the determination of drugs in biological fluids shows that all methods of sample pretreatment have been used and that the limits of detection achieved vary widely, ranging from low ngcm(-3) to microgcm(-3). The most widely used injection method was hydrodynamic and, in the majority of cases, whenever low detection limits were achieved, this was a result of preconcentration during the sample pretreatment. Only a small proportion of the reported methods employed electrokinetic injection and utilised the field amplified sample injection (FASI) techniques. An experimental investigation of the alternative hydrodynamic and electrokinetic injection methods for a small set of antimalarial drugs is reported. It was found that electrokinetic injection with FASI from an acetonitrile-water matrix produced dramatic improvements in detection limits. This improvement could not, however, be achieved when the drugs were in plasma using protein precipitation, liquid-liquid extraction or solid phase extraction pretreatment methods. This highlights the importance of sample pretreatment in utilising the potential sensitivity of capillary electrophoresis with electrokinetic injection.