Gradient reversed-phase liquid chromatography coupled on-line to receptor-affinity detection based on the urokinase receptor

Development of on-line high performance liquid chromatography (HPLC)-biochemical detection methods as tools in the identification of bioactives

Biochemical detection (BCD) methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC) is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays.

Advances in mass spectrometry-based post-column bioaffinity profiling of mixtures

In the screening of complex mixtures, for example combinatorial libraries, natural extracts, and metabolic incubations, different approaches are used for integrated bioaffinity screening. Four major strategies can be used for screening of bioactive mixtures for protein targets-pre-column and post-column off-line, at-line, and on-line strategies. The focus of this review is on recent developments in post-column on-line screening, and the role of mass spectrometry (MS) in these systems. On-line screening systems integrate separation sciences, mass spectrometry, and biochemical methodology, enabling screening for active compounds in complex mixtures. There are three main variants of on-line MS based bioassays: the mass spectrometer is used for ligand identification only; the mass spectrometer is used for both ligand identification and bioassay readout; or MS detection is conducted in parallel with at-line microfractionation with off-line bioaffinity analysis. On the basis of the different fields of application of on-line screening, the principles are explained and their usefulness in the different fields of drug research is critically evaluated. Furthermore, off-line screening is discussed briefly with the on-line and at-line approaches.

Determination and identification of estrogenic compounds generated with biosynthetic enzymes using hyphenated screening assays, high resolution mass spectrometry and off-line NMR

This paper describes the determination and identification of active and inactive estrogenic compounds produced by biosynthetic methods. A hyphenated screening assay towards the human estrogen receptor ligand binding domain (hER)alpha and hERbeta integrating target-ligand interactions and liquid chromatography-high resolution mass spectrometry was used. With this approach, information on both biologic activity and structure identity of compounds produced by bacterial mutants of cytochrome P450s was obtained in parallel. Initial structure identification was achieved by high resolution MS/MS, while for full structure determination, P450 incubations were scaled up and the produced entities were purified using preparative liquid chromatography with automated fraction collection. NMR spectroscopy was performed on all fractions for 3D structure analysis; this included 1D-(1)H, 2D-COSY, 2D-NOESY, and (1)H-(13)C-HSQC experiments. This multidimensional screening approach enabled the detection of low abundant biotransformation products which were not suitable for detection in either one of its single components. In total, the analytical scale biosynthesis produced over 85 compounds from 6 different starting templates. Inter- and intra-day variation of the biochemical signals in the dual receptor affinity detection system was less than 5%. The multi-target screening approach combined with full structure characterization based on high resolution MS(/MS) and NMR spectroscopy demonstrated in this paper can generally be applied to e.g. metabolism studies and compound-library screening.

Receptor–ligand binding assays: Technologies and Applications

Receptor-ligand interactions play a crucial role in biological systems and their measurement forms an important part of modern pharmaceutical development. Numerous assay formats are available that can be used to screen and quantify receptor ligands. In this review, we give an overview over both radioactive and non-radioactive assay technologies with emphasis on the latter. While radioreceptor assays are fast, easy to use and reproducible, their major disadvantage is that they are hazardous to human health, produce radioactive waste, require special laboratory conditions and are thus rather expensive on a large scale. This has led to the development of non-radioactive assays based on optical methods like fluorescence polarization, fluorescence resonance energy transfer or surface plasmon resonance. In light of their application in high-throughput screening environments, there has been an emphasis on so called "mix-and-measure" assays that do not require separation of bound from free ligand. The advent of recombinant production of receptors has contributed to the increased availability of specific assays and some aspects of the expression of recombinant receptors will be reviewed. Applications of receptor-ligand binding assays described in this review will relate to screening and the quantification of pharmaceuticals in biological matrices.

Effect-directed analysis by high-performance liquid chromatography with gas-segmented enzyme inhibition

A reversed-phase high-performance liquid chromatography system with UV-detector was equipped with an on-line acetylcholinesterase inhibition assay to achieve effect-directed analysis of potentially toxic samples. The enzyme activity was detected colorimetrically using Ellman's reagent. The inhibition and substrate conversion took place in glass capillaries at a 100 microL/min flow rate. Extra-column band spreading in the reaction coils reduces the sensitivity and separation power of biochemical detectors severely. Knitted reactors exhibited no reduction of longitudinal dispersion in the tested flow range. The implementation of air-segmentation allowed an extended inhibition and substrate conversion time without a significant loss of chromatographic resolution. The limit of detection of two model compounds carbofuran (carbamate) and paraoxon-ethyl (organophosphate) was determined to be 13 ng (injected mass) and 7.4 ng, respectively, applying an isocratic chromatography method. A mixture of five insecticides was separated by a gradient elution and the inhibitory effect on the enzyme activity could be detected with high resolution. The band width at half height of the enzyme inhibition detector signal after a reaction time of about 8 min or 4.2 m of capillary, respectively, increased only by a factor of 1.4 compared to the UV-detector signal.

Development and validation of a microsomal online cytochrome P450 bioreactor coupled to solid-phase extraction and reversed-phase liquid chromatography

The development and validation of an online cytochrome P450 (CYP)-based bioreactor coupled to automated solid-phase extraction (SPE) and gradient HPLC separation is described. The analytical method was checked on intra- and inter-day repeatability of the ethoxyresorufin-O-demethylation (EROD) reaction with CYP 1Al/1A2 containing beta-NF induced rat liver microsomes as an enzyme source. These experiments showed that CYP activity was linearly decreased with 16% over an 11 h period. Inter-day measurements had a CV of 9.1%. Furthermore, Km and Vmax values of the EROD reaction, measured with the bioreactor, were 2.72 +/- 0.46 microM and 7.9 +/- 0.5 nmol/min/mg protein, respectively. These were in good correspondence with Km and Vmax values, measured with standard batch assay, which amounted 0.66 +/- 0.08 microM and 6.4 +/- 0.2 nmol/min/mg protein respectively. In conclusion the newly developed analytical method can be used effectively and at a microliter scale for online generation, extraction and separation of metabolites.

Heterogeneous post-column immunoreaction detection using magnetized beads and a laboratory-constructed electromagnetic separator

The nature of immune reactors allows development of quantitative analytical methods that are highly selective and can often be used directly with complex biological matrixes such as blood, plasma or urine. A major limitation of immunoassay is that antibodies are sometimes unable to discriminate structurally similar species such as drug metabolites and synthetic analogs. The problem associated with the lack of discrimination can be circumvented by coupling immunoassay with liquid chromatography post-column. The most commonly used separation method in post-column immunoreaction detection is the affinity column. Affinity columns may create undesired effects such as a compromise of the chromatographic separation efficiency, the requirement for an antibody with fast reaction kinetics and the need for flushing the column. This paper reports a post-column immunoreaction detection system coupled with a laboratory-constructed on-line magnetic separation flow chamber that is designed to overcome these problems. The system uses disposable magnetic beads as a solid-phase support for separation that can be easily removed from the system. The model analytes chosen for this study were digoxin and its metabolites due to the commercial availability of monoclonal antibodies for these compounds. Digoxin was separated using a chromatographic method prior to being interfaced through a liquid handler system to the immunoreactor. Compatibility of the HPLC mobile phase was determined to be acceptable with a mixing ratio of 1:3 between the LC fraction and immunoreagent solution. The dynamic range of the calibration curve in digoxin-spiked phosphate buffer was found to be 0.25-12 ng/ml and a quadratic fit was found to provide the best fit to the data with a correlation coefficient of 0.9974. The residual error for all standards was less than 15%. The percentage RSDs for the two controls, 2 and 10 ng/ml, were 6.88 and 4.82% (n = 6) and the percentage errors were 7.07 and -6.89% (n = 6), respectively.

Potential of on-line micro-LC immunochemical detection in the bioanalysis of cytokines

An on-line liquid chromatography-immunochemical detection (LC-ICD) system for the quantification of cytokines in cell extracts has been developed using a post-column continuous-flow reaction detection system using fluorescence labelled antibodies. Cytokines eluting from the micro-HPLC column react with antibodies to form fluorescent complexes. In a second step the excess of free antibody is trapped on a cytokine bound support prior to fluorescence detection. The concentration detection limit of the flow injection-ICD system was 50 pM (20 microl injection volume) for interleukin 4 (IL-4). An absolute detection limit of 1 fmol was obtained for IL-4. Similar to ICD systems for small non-protein analytes developed earlier, reaction times were in the order of 1 minute. The immobilised cytokine affinity columns can easily be regenerated and used for months. The present ICD system for interleukins 4, 6, 8 and 10 was coupled to ion exchange-, size exclusion- and reversed phase chromatography. Important parameters (reaction times, reaction conditions) were investigated to get a better understanding of post-column ICD systems for macromolecules.

Coupling immunoassays with chromatographic separation techniques

Coupling immunoassays with HPLC separation techniques is becoming increasingly useful in the analysis of biological and nonbiological samples of both large and small molecules. This is because it provides both sensitivity and selectivity for molecular analysis at relatively low cost, low maintenance and with excellent potential for automation. This paper reviews application of this hyphenated approach both in the pre-column immunoextraction and post-column immunodetection modes. Systems in which immunoassays are interfaced to chromatographic separations in order to separate bound and free fractions of the immunoassay will not be included since these systems do not provide the enhanced selectivity common to hyphenated systems. Post-column immunodetection is based on various immunoassay formats such as direct detection, one-site, competitive and sandwich immunoassays. Homogeneous immunodetectors are more convenient than heterogeneous immunodectors since there are no separation and column regeneration steps involved in homogeneous immunoassays. On the other hand, heterogeneous immunoassays are generally more sensitive than homogeneous immunoassays since interfering substances are removed prior to immunodetection. Advantages and limitations for the various approaches will be discussed.